Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
Recv: �����is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: Z�Y.J��not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N4 M190 S70.0*69
Recv: Errorg��not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: [���is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: Erro�I����Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: �umber is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N4 M190 S70.0*69
Recv: ErBr is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N4 M190 S70.0*69
Recv: Error:L5r���Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N4 M190 S70.0*69
Recv: �������is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: ����is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: �������is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: �V��is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: ���is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: lmber is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: [��is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N4 M190 S70.0*69
Recv: Error:Line L*���Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: 6K���is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: �����is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N4 M190 S70.0*69
Recv: Error:Line Number is nJ���1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: ���is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: �������is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: �����is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N4 M190 S70.0*69
Recv: Erro�Z.r���Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: }mber is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: Er��is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: �������is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Communication timeout during an active resend, resending same line again to trigger response from printer. Configure long running commands or increase communication timeout if that happens regularly on specific commands or long moves.
Send: N4 M190 S70.0*69
Recv: Errorgk�not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv:
Recv: ����is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: Ev���is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Changing monitoring state from 'Printing' to 'Offline'
Connecting to: /dev/ttyACM0
Changing monitoring state from 'Offline' to 'Opening serial port'
Connected to: Serial<id=0x6d9c0790, open=True>(port='/dev/ttyACM0', baudrate=250000, bytesize=8, parity='N', stopbits=1, timeout=10.0, xonxoff=False, rtscts=False, dsrdtr=False), starting monitor
Changing monitoring state from 'Opening serial port' to 'Connecting'
Send: N0 M110 N0*125
Recv: Error:Line Number is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Printer requested line 3 but no sufficient history is available, can't resend
Recv: ok
Changing monitoring state from 'Connecting' to 'Operational'
Send: N0 M110 N0*125
Connection closed, closing down monitor
Recv: echo:Unknown command: ""
Recv: ok
Send: M21
Recv: echo:SD init fail
Recv: ok
Send: M115
Recv: FIRMWARE_NAME:Marlin V1; Sprinter/grbl mashup for gen6 FIRMWARE_URL:http://www.mendel-parts.com PROTOCOL_VERSION:1.0 MACHINE_TYPE:REPRAPGURU EXTRUDER_COUNT:1
Recv: ok
Send: M105
Recv: ok T:210.0 /210.0 B:70.2 /70.0 @:54 B@:128
Send: M105
Recv: ok T:210.0 /210.0 B:70.8 /70.0 @:50 B@:128
Send: M105
Recv: ok T:210.2 /210.0 B:71.4 /70.0 @:43 B@:0
Send: M105
Recv: ok T:210.0 /210.0 B:71.4 /70.0 @:48 B@:0
Changing monitoring state from 'Operational' to 'Printing'
Send: N0 M110 N0*125
Recv: ok
Send: N1 M140 S70.0*77
Recv: ok
Send: N2 M109 T0 S210.0*51
Recv: T:210.0 E:0 W:8
Recv: T:210.0 E:0 W:7
Recv: T:210.0 E:0 W:6
Recv: T:210.0 E:0 W:5
Recv: T:210.4 E:0 W:4
Recv: T:210.7 E:0 W:3
Recv: T:210.7 E:0 W:2
Recv: T:210.7 E:0 W:1
Recv: T:210.7 E:0 W:0
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: E>er is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: �g��not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: �umber is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Recv: }[���is not Last Line Number+1, Last Line: 2
Recv: Resend: 3
Recv: ok
Send: N3 T0*57
Recv: echo:Unknown command: ""
Recv: ok
Send: N4 M190 S70.0*69
Changing monitoring state from 'Printing' to 'Operational'
Changing monitoring state from 'Operational' to 'Offline'
Connection closed, closing down monitor
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.