Created
January 31, 2016 03:56
-
-
Save jdecaron/9fa295c10f8602f3dd1c to your computer and use it in GitHub Desktop.
Prusa i3 printer settings for taulman 3D t-glase PET
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # generated by Slic3r 1.3.0-dev on Sat Jan 30 21:21:01 2016 | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 750 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 40 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 2000 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 75% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 0 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0 | |
| fill_angle = 45 | |
| fill_density = 30% | |
| fill_pattern = line | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 0 | |
| first_layer_height = 0.2 | |
| first_layer_speed = 30 | |
| gap_fill_speed = 40 | |
| gcode_comments = 0 | |
| infill_acceleration = 750 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 40 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 40 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 10 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 40 | |
| perimeters = 5 | |
| post_process = | |
| print_settings_id = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| skirt_distance = 5 | |
| skirt_height = 1 | |
| skirts = 1 | |
| small_perimeter_speed = 75% | |
| solid_infill_below_area = 0 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 40 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 40 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 8 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 40 | |
| top_solid_layers = 3 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment