This will allow you to test a specific frequency that you hear when you do your resonance testing in Klipper and potentially track down where extra peaks are coming from. If something is rattling at a specific frequency, you can specify that frequency and feel around the printer until you track it down.
Code was adopted by zifnab from somewhere in Klipper.
You have to have [resonance_holder] in your printer.cfg.
The command is HOLD_RESONANCE AXIS=<axis> FREQ=int SECONDS=<seconds>
| <!DOCTYPE html> | |
| <html> | |
| <head> | |
| <meta charset="UTF-8"> | |
| <!-- https://developer.mozilla.org/en-US/docs/Web/HTTP/CSP --> | |
| <meta http-equiv="Content-Security-Policy" content="default-src 'self'; script-src 'self'"> | |
| <title>Hello World!</title> | |
| <style> | |
| webview { | |
| position: absolute; |
| [gcode_macro BED_MESH_CALIBRATE] | |
| rename_existing: BED_MESH_CALIBRATE_BASE | |
| ; gcode parameters | |
| variable_parameter_AREA_START : 0,0 | |
| variable_parameter_AREA_END : 0,0 | |
| ; the clearance between print area and probe area | |
| variable_mesh_area_offset : 5.0 | |
| ; number of sample per probe point | |
| variable_probe_samples : 2 | |
| ; minimum probe count |
| [gcode_macro BED_MESH_CALIBRATE] | |
| rename_existing: BED_MESH_CALIBRATE_BASE | |
| ; gcode parameters | |
| variable_parameter_AREA_START : 0,0 | |
| variable_parameter_AREA_END : 0,0 | |
| ; the clearance between print area and probe area | |
| variable_mesh_area_offset : 5.0 | |
| ; number of sample per probe point | |
| variable_probe_samples : 2 | |
| ; minimum probe count |
Get-ItemProperty HKLM:\SYSTEM\CurrentControlSet\Enum\HID\*\*\Device` Parameters FlipFlopWheel -EA 0 | ForEach-Object { Set-ItemProperty $_.PSPath FlipFlopWheel 1 }FlipFlopWheel attributes set to 1
Get-ItemProperty HKLM:\SYSTEM\CurrentControlSet\Enum\HID\*\*\Device` Parameters FlipFlopWheel -EA 0
| columns_that_make_record_distinct = [:some_id, :another_name] | |
| distinct_ids = Model.select("MIN(id) as id").group(columns_that_make_record_distinct).map(&:id) | |
| duplicate_records = Model.where.not(id: distinct_ids) |
| # This file is an example config file for cartesian style printers. | |
| # One may copy and edit this file to configure a new cartesian | |
| # printer. | |
| # DO NOT COPY THIS FILE WITHOUT CAREFULLY READING AND UPDATING IT | |
| # FIRST. Incorrectly configured parameters may cause damage. | |
| # See docs/Config_Reference.md for a description of parameters. | |
| ##################################################################### |
| # This file contains pin mappings for the Anycubic i3 Mega with | |
| # Ultrabase from 2017. (This config may work on an Anycubic i3 Mega v1 | |
| # prior to the Ultrabase if you comment out the definition of the | |
| # endstop_pin in the stepper_z1 section.) To use this config, the | |
| # firmware should be compiled for the AVR atmega2560. | |
| # See the example.cfg file for a description of available parameters. | |
| #[gcode_arcs] | |
| #resolution: 0.05 |
| time_to_cook = ARGV[0].to_i | |
| hour_glass_one = ARGV[1].to_i | |
| hour_glass_two = ARGV[2].to_i | |
| def can_cook?(time_to_cook, hour_glass_one, hour_glass_two) | |
| total_time = 0 | |
| used_hour_glass_one = hour_glass_one | |
| used_hour_glass_two = hour_glass_two |
| location_points = [ | |
| [-29.640088, -50.764216], | |
| [-29.637486, -50.770814], | |
| [-29.633196, -50.773013] | |
| ] | |
| # using Harvesine formula to calculate the distance | |
| # based on https://github.com/alexreisner/geocoder/blob/master/lib/geocoder/calculations.rb#L72 | |
| def distance(location_one, location_two) | |
| rad_per_deg = Math::PI/180 |