jeez/ Scheduled Tx Tools

## Scheduled Tx Tools

      
    Raw
  

               Scheduled Tx Tools
            
          
## README
Here we provide a testing application and scripts that can be used
to exercise the SO_TXTIME APIs, the etf qdisc and the taprio qdisc.

The example is based on a sample application (udp_tai.c) provided by
Richard Cochran as part of the RFC v1 of SO_TXTIME. We've extended
it in several ways so it may be used as an example of different
setups: per-packet Tx time only based systems, per-port Time-aware
scheduler, and a combination of those.

The documentation is split into 2 README files:

 - README.etf: Provides instructions for how to setup an example to
               use etf standalone. In other words, only Time-based
               transmission is used.

 - README.taprio: Provides instructions for how to setup an example
                  to use etf and taprio together. That means using
                  a Time-aware scheduler (i.e. 802.1Qbv) in conjunction
                  time-based transmission for fine-grained control over
                  the Tx time of packets.

A custom tool known as 'dump-classifier' was developed so we can
verify if a taprio schedule is being respected. For more information
please check README.classifier .

## README.classifier
To help analyze taprio scheduling characteristics, we've developed a custom
tool called 'dump-classifier'.


dump-classifier
===============

dump-classifier aims to ease the test/verification of how well an
implementation runs 802.1Qbv-like schedules.


How to compile
--------------

* Dependencies:

  - libpcap-dev


Just running 'make' should work, if all the dependencies are met:

$ make


How to run
----------

$ ./dump-classifier -s <BATCH FILE> -f <FILTER FILE> -d <DUMP FILE>

<BATCH FILE> is a text file containg a batch file intended for use
with 'tc -batch', this allows dump-classifier to use the same file
used for configuring the qdiscs.

Example:
-----<cut
qdisc replace dev enp3s0 parent root handle 100 taprio \
      num_tc 3 \
      map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
      queues 1@0 1@1 2@2 \
      base-time 1536883100000000000 \
      sched-entry S 01 300000 \
      sched-entry S 02 300000 \
      sched-entry S 04 400000 \
      clockid CLOCK_TAI

qdisc replace dev enp3s0 parent 100:1 etf \
      offload delta 300000 clockid CLOCK_TAI

qdisc replace dev enp3s0 parent 100:2 etf clockid CLOCK_TAI \
      delta 300000 offload deadline_mode
----->end

<FILTER FILE> allows different traffic classes to be indentified in a
pcap dump file, it has the following format is contains a traffic
class name and a pcap expression on each line, any traffic class that
doesn't have a filter associated will be classified as "BE" (best
effort). The order is important, as the first line will match the
first traffic class (bit 0) in the gatemask parameter (the second
field of each line of the schedule file), the second line will match
the second traffic class (bit 1), and so on.

Example:
-----<cut
talker :: ether dst aa:aa:aa:aa:aa:aa
----->end

<BASE TIME> an absolute time in nanoseconds where the schedule
started, if that time is before the timestamp of the first packet in
the <DUMP FILE>, the schedule will run until it reaches that
timestamp, packets that have a timestamp before basetime will be
ignored.

<DUMP FILE> is a dump file captured via tcpdump, with timestamp
precision in nanoseconds, so captured using something like this:

$ tcpdump -j adapter_unsynced --time-stamp-precision=nanos -i enp2s0 -w dump.pcap


## README.etf
Here we present the steps taken for setting up a test that uses *only*
the ETF qdisc. That means that only Time-based transmission is exercised.

The 'talker' side of the example described below will transmit a packet
every 1ms. The packet's txtime is set through the SO_TXTIME api, and is
copied into the packet's payload.

At the 'listener' side, we capture traffic and then post-process it to
compute the delta between each packet's arrival time and their txtime.

ptp4l is used for synchronizing the PHC clocks over the network and
phc2sys is used on the 'talker' size for synchronizing the system
clock to the PHC.

CLOCK_TAI is the reference clockid used throughout the example for the
qdiscs and the applications.


# LISTENER #

1) Setup the PTP master. If using the listener end point as PTP
master, setup_clock_sync.sh can be used as the below.

e.g.:	$ sudo ip addr add 192.168.0.78/4 broadcast 192.168.0.255 dev IFACE
	$ sudo ./setup_clock_sync.sh -i IFACE -m -v

This script will start ptp4l so the PHC time is propagated to the
network. The system clock and the PHC are NOT synchronized on that mode.

* Note that the TAI offset is applied, so CLOCK_REALTIME will be in
  the UTC scale while CLOCK_TAI will be in the TAI scale, just like
  the PHC.


2) Start capturing traffic on the listener end point. If we want to capture
traffic for 1 minute, and are expecting 1 packet per milisecond:

e.g.:	$ sudo tcpdump -c 60000 -i enp3s0 -w tmp.pcap			\
		-j adapter_unsynced -tt --time-stamp-precision=nano	\
		udp port 7788


# TALKER #

3) Configure the Qdiscs on the talker side (Device Under Testing, DUT).
Our DUT uses an Intel i210 NIC, and our setup here is as follows.

    1.a) First, we setup mqprio as the root qdisc:
	e.g.:	$ sudo tc qdisc replace dev IFACE parent root handle 100 mqprio	\
			num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2	\
			queues 1@0 1@1 2@2 hw 0

    1.b) Then we setup etf with the desired config:
	e.g.:	$ sudo tc qdisc add dev enp2s0 parent 100:1 etf 	\
			offload clockid CLOCK_TAI delta 150000


4) Setup the Device Under Testing (DUT) as PTP slave and synchronize
the local clocks.

e.g.:	$ sudo ip addr add 192.168.0.77/4 broadcast 192.168.0.255 dev IFACE
	$ sudo ./setup_clock_sync.sh -i IFACE -s -v

This script will start ptp4l so the PHC is synchronized to the PTP master,
and then will synchronize the system clock to PHC using phc2sys.
At this stage, based purely on empirical observations, one recommendation
is waiting for the rms value reported by ptp4l to reach a value below 15 ns,
and to remain somewhat constant after that.

* Note that the TAI offset is applied, so CLOCK_REALTIME will be in the UTC
  scale while CLOCK_TAI will be in the TAI scale, just like the PHC.


5) Optionally, build and run check_clocks on both PTP master and slave.

e.g.:	$ make check_clocks && sudo ./check_clocks IFACE

It reports the timestamps fetched from CLOCK_REALTIME, CLOCK_TAI and
the interface's PHC, as well the latency for reading from each clock
and the delta between the PHC and the system clocks.
You may use this information to verify if the offsets were applied
correctly and if the PHC - CLOCK_TAI delta is not too high. Again,
based on empirical observations, we consider this value as "good enough"
if it's less than 25us, and it's been observed to get as low as 4us.


6) Build and run udp_tai on the talker end station

e.g.:	$ gcc -o udp_tai -lpthread udp_tai.c
	$ sudo ./udp_tai -i enp2s0 -P 1000000 -p 90 -d 600000


# LISTENER #

7) Analyze traffic and generate statistics.
We first use tshark for post-processing the pcap file as needed, then
we use a custom python script to compute the packets' offset from their
expected arrival time, and then compute statistics for the overall data set.

e.g.:	$ tshark -r tmp.pcap --disable-protocol dcp-etsi --disable-protocol \
		dcp-pft -t e -E separator=, -T fields -e frame.number       \
		-e frame.time_epoch -e data.data > tmp.out

	$ ./txtime_offset_stats.py -f tmp.out


# NOTE ON VLAN USAGE #

If your tests require that VLAN tagging is performed by the end stations, then
you must configure the kernel to do so. There are different ways to approach that,
one of them is to create a vlan interface that knows how to map from a socket
priority to the VLAN PCP.

e.g.:	$ ip link add link enp2s0 name enp2s0.2 type vlan id 2 egress 2:2 3:3
	$ ip link set dev enp2s0.2 up

This maps socket priority 2 to PCP 2 and 3 to 3 for egress on a VLAN with id 2.
The same can be done for ingress.


## README.taprio
Here we present the steps taken for setting up a test that uses both
the ETF qdisc and the TAPRIO one. That means that we'll use a (Qbv-like)
port scheduler with a fixed Tx schedule for traffic classes (TC), while
using Time-based transmission for controlling the Tx time of packets within
each TC.

The 'talker' side of the example described below will have 2 applications
transmitting time-sensitive traffic following a strict cyclic schedule.
In addition to that, iperf3 is used to transmit best-effort traffic on the
port. The port schedule is thus comprised by 3 time-slices, with a total
cycle-time of 1 millisecond allocated as:

 - Traffic Class 0 (TC 0): duration of 300us, 'strict txtime' is used.
 - Traffic Class 1 (TC 1): duration of 300us, 'deadline txtime' is used.
 - Traffic Class 2 (TC 2): duration of 400us, best-effort traffic.

The system is configured so the application enqueueing packets for
TC 0 will set its packets *Tx time* with an offset of 250us within its
time-slice.

The application enqueueing packets for TC 1 will set its packets *deadline*
with an offset of 250us within its time-slice. However, because this TC is
using the deadline mode of SO_TXTIME + etf, then a packet maybe transmitted
at anytime within its time slice that is before its deadline.

Best-effort traffic is transmitted at anytime during the third time slice.

A away to visualize this cycle and its time-slices is:

          |______x_|......D_|bbbbbbbbbb|
          0        299      599        999us


The application for each time-sensitive traffic class will transmit a packet
every 1ms. The packet's txtime is set through the SO_TXTIME api, and is
copied into the packet's payload.

At the 'listener' side, we capture traffic and then post-process it to
verify if packets are arriving outside of the time-slice they belong to.

ptp4l is used for synchronizing the PHC clocks over the network and
phc2sys is used on the 'talker' size for synchronizing the system
clock to the PHC.

CLOCK_TAI is the reference clockid used throughout the example for the
qdiscs and the applications.


# NOTE ON VLAN USAGE #

If your tests require that VLAN tagging is performed by the end stations, then
you must configure the kernel to do so. There are different ways to approach that,
one of them is to create a vlan interface that knows how to map from a socket
priority to the VLAN PCP.

e.g.:	$ ip link add link enp2s0 name enp2s0.2 type vlan id 2 egress 2:2 3:3
	$ ip link set dev enp2s0.2 up

This maps socket priority 2 to PCP 2 and 3 to 3 for egress on a VLAN with id 2.
The same can be done for ingress.


# TALKER #
    1) Setup network
        sudo ip addr add 192.168.0.77/4 broadcast 192.168.0.255 dev enp3s0

    2) Setup qdiscs

       The script 'config-taprio.sh', will configure taprio and ETF,
       automatically, with the same parameters explained below. It
       will also save on the 'taprio.batch' file the configuration
       used, so it can be used for analysis.

       The rest of Section 2 describes taprio and etf configuration
       parameters briefly.

      2.1) Setup taprio with a base-time starting in 2min from now rounded down.
           We must add the 37s UTC-TAI offset to the timestamp we get with 'date'.

        i=$((`date +%s%N` + 37000000000 + (2 * 60 * 1000000000))) ;       \
        base=$(($i - ($i % 1000000000))) ;                                \
        tc qdisc replace dev enp3s0 parent root handle 100 taprio         \
                 num_tc 3                                                 \
                 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2                      \
                 queues 1@0 1@1 2@2                                       \
                 base-time $base                                          \
                 sched-entry S 01 300000                                  \
                 sched-entry S 02 300000                                  \
                 sched-entry S 04 400000                                  \
                 clockid CLOCK_TAI

           We can read the above as:
            - there are 3 traffic classes (num_tc 3);
            - SO_PRIORITY value 3 maps to TC 0, while value 2 maps to TC 1.
              Everything else maps to the other (best-effort) traffic classes;
            - "queues 0 1 2 2" is a positional argument, meaning that TC 0 maps
              to queue 0, TC 1 maps to queue 1 and TC 2 maps to queues 2 and 3.
            - gates.sched is used as schedule file;
            - the reference clock is CLOCK_TAI;


      2.2) Setup etf for queue TC 0:

        tc qdisc replace dev enp3s0 parent 100:1 etf clockid CLOCK_TAI \
          delta 200000 offload


      2.3) Setup etf in deadline mode for TC 1:

        tc qdisc replace dev enp3s0 parent 100:2 etf clockid CLOCK_TAI \
          delta 200000 offload deadline_mode


    3) Start time sync (ptp slave):
        sudo ./setup_clock_sync.sh -i enp3s0 -s -v


    4) Start iperf3 client:
        iperf3 -c 192.168.0.78 -t 600 --fq-rate 100M


    5) Start udp_tai for TC 0. Use a base-time starting in 1min from now + a
       250us offset for txtime:

        now=`date +%s%N` ; i=$(($now + 37000000000 + (60 * 1000000000))) ; \
        base=$(($i - ($i % 1000000000) + 250000)) ;                        \
        sudo ./udp_tai -i enp3s0 -b $base -P 1000000 -t 3 -p 90 -d 600000  \
          -u 7788

        To automate this process a little, the script
        'run-udp-tai-tc0.sh' is provided.

    6) Start udp_tai in deadline mode for TC 1. Use the txtime computed for
       the previous traffic class (above) and add 300us so it falls under the
       second time slice (TC 1). For example, if the instance of udp_tai executed
       on the previous step printed
       "txtime of 1st packet is: 1528320726000250000", then the now we should do:

        sudo ./udp_tai -i enp3s0 -t 2 -p 90 -D -d 600000 \
          -b 1528320726000550000 -u 7798

# LISTENER #
    1) Setup network
        sudo ip addr add 192.168.0.78/4 broadcast 192.168.0.255 dev enp3s0


    2) Start time sync (ptp master)
        sudo ./setup_clock_sync.sh -i enp3s0 -m -v


    3) Start iperf server
        iperf3 -s


    4) Prepare 'dump-classifier' files. Running 'config-taprio.sh'
       should produce a 'taprio.batch' file, it will be used for
       verifying how well the schedule specified there was followed.
       Please refer to README.classifier for further information.

        --filters--
        talker_strict :: udp port 7788
        talker_deadline :: udp port 7798


        --taprio.batch--
        qdisc replace dev enp3s0 parent root handle 100 taprio \
                num_tc 3 \
                map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
                queues 1@0 1@1 2@2 \
                base-time 1536883100000000000 \
                sched-entry S 01 300000 \
                sched-entry S 02 300000 \
                sched-entry S 04 400000 \
                clockid CLOCK_TAI

        qdisc replace dev enp3s0 parent 100:1 etf \
                offload delta 300000 clockid CLOCK_TAI

        qdisc replace dev enp3s0 parent 100:2 etf clockid CLOCK_TAI \
                delta 300000 offload deadline_mode

    5) Start capturing traffic:

        sudo tcpdump -c 600000 -i enp3s0 -w tmp.pcap -j adapter_unsynced \
          -tt --time-stamp-precision=nano

    6) Use the talkers to transmit packets as described on the next section.


    6) After traffic was captured, check if packets arrived outside of their
       time-slices. The base-time comes from the udp_tai for TC 0 minus the
       250us txtime offset as used below. For example:

        ./dump-classifier -d tmp.pcap -f filter -s taprio.batch | grep -v ontime

## check_clocks.c
/*
 * Copyright (c) 2018, Intel Corporation
 *
 * SPDX-License-Identifier: BSD-3-Clause
 *
 */

#include <fcntl.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <time.h>
#include <unistd.h>
#include <linux/ethtool.h>
#include <linux/sockios.h>
#include <net/if.h>
#include <sys/ioctl.h>

#define ONE_SEC 1000000000ULL
#define PTP_MAX_DEV_PATH 16

/* fd to clockid helpers. Copied from posix-timers.h. */
#define CLOCKFD 3
static inline clockid_t make_process_cpuclock(const unsigned int pid,
					      const clockid_t clock)
{
	return ((~pid) << 3) | clock;
}

static inline clockid_t fd_to_clockid(const int fd)
{
	return make_process_cpuclock((unsigned int) fd, CLOCKFD);
}

static inline void open_phc_fd(int* fd_ptp, char* ifname)
{
	struct ethtool_ts_info interface_info = {0};
	char ptp_path[PTP_MAX_DEV_PATH];
	struct ifreq req = {0};
	int fd_ioctl;

	/* Get PHC index */
	interface_info.cmd = ETHTOOL_GET_TS_INFO;
	snprintf(req.ifr_name, sizeof(req.ifr_name), "%s", ifname);
	req.ifr_data = (char *) &interface_info;

	fd_ioctl = socket(AF_INET, SOCK_DGRAM, 0);
	if (fd_ioctl < 0) {
		perror("Couldn't open socket");
		exit(EXIT_FAILURE);
	}

	if (ioctl(fd_ioctl, SIOCETHTOOL, &req) < 0) {
		perror("Couldn't issue SIOCETHTOOL ioctl");
		exit(EXIT_FAILURE);
	}

	snprintf(ptp_path, sizeof(ptp_path), "%s%d", "/dev/ptp",
		 interface_info.phc_index);

	*fd_ptp = open(ptp_path, O_RDONLY);
	if (*fd_ptp < 0) {
		perror("Couldn't open the PTP fd. Did you forget to run with sudo again?");
		exit(EXIT_FAILURE);
	}

	close(fd_ioctl);
}

int main(int argc, char** argv)
{
	struct timespec ts_rt1, ts_rt2, ts_ptp1, ts_ptp2, ts_tai1, ts_tai2;
	uint64_t rt, tai, ptp, lat_rt, lat_tai, lat_ptp;
	char ifname[IFNAMSIZ];
	int fd_ptp, err;

	if (argc < 2) {
		printf("You must run this as %s NET_IFACE (e.g. enp2s0)\n", argv[0]);
		return EXIT_FAILURE;
	}

	strncpy(ifname, argv[1], sizeof(ifname) - 1);
	open_phc_fd(&fd_ptp, ifname);

	/* Fetch timestamps for each clock. */
	clock_gettime(CLOCK_REALTIME, &ts_rt1);
	clock_gettime(CLOCK_TAI, &ts_tai1);
	clock_gettime(fd_to_clockid(fd_ptp), &ts_ptp1);
	rt = (ts_rt1.tv_sec * ONE_SEC) + ts_rt1.tv_nsec;
	tai = (ts_tai1.tv_sec * ONE_SEC) + ts_tai1.tv_nsec;
	ptp = (ts_ptp1.tv_sec * ONE_SEC) + ts_ptp1.tv_nsec;

	/* Compute clocks read latency. */
	clock_gettime(CLOCK_REALTIME, &ts_rt1);
	clock_gettime(CLOCK_REALTIME, &ts_rt2);
	lat_rt = ((ts_rt2.tv_sec * ONE_SEC) + ts_rt2.tv_nsec)
		   - ((ts_rt1.tv_sec * ONE_SEC) + ts_rt1.tv_nsec);

	clock_gettime(CLOCK_TAI, &ts_tai1);
	clock_gettime(CLOCK_TAI, &ts_tai2);
	lat_tai = ((ts_tai2.tv_sec * ONE_SEC) + ts_tai2.tv_nsec)
		   - ((ts_tai1.tv_sec * ONE_SEC) + ts_tai1.tv_nsec);

	clock_gettime(fd_to_clockid(fd_ptp), &ts_ptp1);
	clock_gettime(fd_to_clockid(fd_ptp), &ts_ptp2);
	lat_ptp = ((ts_ptp2.tv_sec * ONE_SEC) + ts_ptp2.tv_nsec)
		   - ((ts_ptp1.tv_sec * ONE_SEC) + ts_ptp1.tv_nsec);

	printf("rt tstamp:\t%llu\n", rt);
	printf("tai tstamp:\t%llu\n", tai);
	printf("phc tstamp:\t%llu\n", ptp);
	printf("rt latency:\t%llu\n", lat_rt);
	printf("tai latency:\t%llu\n", lat_tai);
	printf("phc latency:\t%llu\n", lat_ptp);
	printf("phc-rt delta:\t%lld\n", ptp - rt);
	printf("phc-tai delta:\t%lld\n", ptp - tai);

	close(fd_ptp);

	return EXIT_SUCCESS;
}

## config-etf.sh
#!/bin/bash
#
# Copyright (c) 2018, Intel Corporation
#
# SPDX-License-Identifier: BSD-3-Clause
#

IFACE=$1

if [ -z $IFACE ]; then
    echo "You must provide the network interface as first argument"
    exit -1
fi

BATCH_FILE=etf.batch

cat > $BATCH_FILE <<EOF
qdisc replace dev $IFACE parent root handle 100 mqprio \\
      num_tc 3 \\
      map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\
      queues 1@0 1@1 2@2 \\
      hw 0

qdisc replace dev enp3s0 parent 100:1 etf \\
      offload delta 300000 clockid CLOCK_TAI

qdisc replace dev enp3s0 parent 100:2 etf clockid CLOCK_TAI \\
      delta 300000 offload deadline_mode
EOF

tc -batch $BATCH_FILE

## config-taprio.sh
#!/bin/bash
#
# Copyright (c) 2018, Intel Corporation
#
# SPDX-License-Identifier: BSD-3-Clause
#

IFACE=$1

if [ -z $IFACE ]; then
    echo "You must provide the network interface as first argument"
    exit -1
fi

i=$((`date +%s%N` + 37000000000 + (2 * 60 * 1000000000)))

BASE_TIME=$(($i - ($i % 1000000000)))
BATCH_FILE=taprio.batch

cat > $BATCH_FILE <<EOF
qdisc replace dev $IFACE parent root handle 100 taprio \\
      num_tc 3 \\
      map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\
      queues 1@0 1@1 2@2 \\
      base-time $BASE_TIME \\
      sched-entry S 01 300000 \\
      sched-entry S 02 300000 \\
      sched-entry S 04 400000 \\
      clockid CLOCK_TAI

qdisc replace dev $IFACE parent 100:1 etf \\
      offload delta 200000 clockid CLOCK_TAI

qdisc replace dev $IFACE parent 100:2 etf clockid CLOCK_TAI \\
      delta 200000 offload deadline_mode
EOF

tc -batch $BATCH_FILE

echo "Base time: $BASE_TIME"
echo "Configuration saved to: $BATCH_FILE"

## dump-classifier.c
/*
 * Copyright (c) 2018, Intel Corporation
 *
 * SPDX-License-Identifier: BSD-3-Clause
 *
 */

#include <argp.h>
#include <inttypes.h>
#include <pcap.h>
#include <stdbool.h>
#include <stdint.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>

#define NSEC_TO_SEC 1e9

#define NUM_FILTERS 8
#define NUM_ENTRIES 64
#define MAX_ARGS 100

/* TAPRIO */
enum {
	TC_TAPRIO_CMD_SET_GATES = 0x00,
	TC_TAPRIO_CMD_SET_AND_HOLD = 0x01,
	TC_TAPRIO_CMD_SET_AND_RELEASE = 0x02,
};

#define NEXT_ARG() \
	do {								\
		argv++;							\
		if (--argc <= 0) {					\
			fprintf(stderr, "Incomplete command\n");	\
			exit(-1);					\
		}							\
	} while (0)

enum traffic_flags {
	TRAFFIC_FLAGS_TXTIME,
};

struct tc_filter {
	char *name;
	struct bpf_program prog;
	unsigned int flags;
};

struct sched_entry {
	uint8_t command;
	uint32_t gatemask;
	uint32_t interval;
};

struct schedule {
	struct sched_entry entries[NUM_ENTRIES];
	int64_t base_time;
	size_t current_entry;
	size_t num_entries;
	int64_t cycle_time;
};

static struct argp_option options[] = {
	{"batch-file", 's', "BATCH_FILE", 0, "File containing the taprio configuration" },
	{"dump-file", 'd', "DUMP_FILE", 0, "File containing the tcpdump dump" },
	{"filters-file", 'f', "FILTERS_FILE", 0, "File containing the classfication filters" },
	{ 0 }
};

static struct tc_filter traffic_filters[NUM_FILTERS];
static FILE *batch_file, *dump_file, *filters_file;
static struct schedule schedule;

static error_t parser(int key, char *arg, struct argp_state *state)
{
	switch (key) {
	case 's':
		batch_file = fopen(arg, "r");
		if (!batch_file) {
			perror("Could not open file, fopen");
			exit(EXIT_FAILURE);
		}
		break;
	case 'd':
		dump_file = fopen(arg, "r");
		if (!dump_file) {
			perror("Could not open file, fopen");
			exit(EXIT_FAILURE);
		}
		break;
	case 'f':
		filters_file = fopen(arg, "r");
		if (!filters_file) {
			perror("Could not open file, fopen");
			exit(EXIT_FAILURE);
		}
		break;
	}

	return 0;
}

static struct argp argp = { options, parser };

static void usage(void)
{
	fprintf(stderr, "dump-classifier -s <tc batch file> -d <dump-file> -f <filters-file>\n");
}

/* split command line into argument vector */
int makeargs(char *line, char *argv[], int max_args)
{
	static const char ws[] = " \t\r\n";
	char *cp = line;
	int argc = 0;

	while (*cp) {
		/* skip leading whitespace */
		cp += strspn(cp, ws);

		if (*cp == '\0')
			break;

		if (argc >= (max_args - 1))
			return -1;

		/* word begins with quote */
		if (*cp == '\'' || *cp == '"') {
			char quote = *cp++;

			argv[argc++] = cp;
			/* find ending quote */
			cp = strchr(cp, quote);
			if (cp == NULL) {
				fprintf(stderr, "Unterminated quoted string\n");
				exit(1);
			}
		} else {
			argv[argc++] = cp;

			/* find end of word */
			cp += strcspn(cp, ws);
			if (*cp == '\0')
				break;
		}

		/* seperate words */
		*cp++ = 0;
	}
	argv[argc] = NULL;

	return argc;
}

/* Like glibc getline but handle continuation lines and comments */
ssize_t getcmdline(char **linep, size_t *lenp, FILE *in)
{
	ssize_t cc;
	char *cp;

	cc = getline(linep, lenp, in);
	if (cc < 0)
		return cc;	/* eof or error */

	cp = strchr(*linep, '#');
	if (cp)
		*cp = '\0';

	while ((cp = strstr(*linep, "\\\n")) != NULL) {
		char *line1 = NULL;
		size_t len1 = 0;
		ssize_t cc1;

		cc1 = getline(&line1, &len1, in);
		if (cc1 < 0) {
			fprintf(stderr, "Missing continuation line\n");
			return cc1;
		}

		*cp = 0;

		cp = strchr(line1, '#');
		if (cp)
			*cp = '\0';

		*lenp = strlen(*linep) + strlen(line1) + 1;
		*linep = realloc(*linep, *lenp);
		if (!*linep) {
			fprintf(stderr, "Out of memory\n");
			*lenp = 0;
			return -1;
		}
		cc += cc1 - 2;
		strcat(*linep, line1);
		free(line1);
	}
	return cc;
}

static int parse_filters(pcap_t *handle, FILE *file,
			 struct tc_filter *filters, size_t num_filters)
{
	char *name, *expression;
	size_t i = 0;
	int err;

	while (i < num_filters && fscanf(file, "%ms :: %m[^\n]s\n",
					 &name, &expression) != EOF)  {
		struct tc_filter *filter = &filters[i];

		filter->name = name;

		err = pcap_compile(handle, &filter->prog, expression,
				   1, PCAP_NETMASK_UNKNOWN);
		if (err < 0) {
			pcap_perror(handle, "pcap_compile");
			return -EINVAL;
		}

		i++;
	}

	return i;
}

static int str_to_entry_cmd(const char *str)
{
	if (strcmp(str, "S") == 0)
		return TC_TAPRIO_CMD_SET_GATES;

	if (strcmp(str, "H") == 0)
		return TC_TAPRIO_CMD_SET_AND_HOLD;

	if (strcmp(str, "R") == 0)
		return TC_TAPRIO_CMD_SET_AND_RELEASE;

	return -1;
}

int get_u32(uint32_t *val, const char *arg, int base)
{
	unsigned long res;
	char *ptr;

	if (!arg || !*arg)
		return -1;
	res = strtoul(arg, &ptr, base);

	/* empty string or trailing non-digits */
	if (!ptr || ptr == arg || *ptr)
		return -1;

	/* overflow */
	if (res == ULONG_MAX && errno == ERANGE)
		return -1;

	/* in case UL > 32 bits */
	if (res > 0xFFFFFFFFUL)
		return -1;

	*val = res;
	return 0;
}

int get_s64(int64_t *val, const char *arg, int base)
{
	long res;
	char *ptr;

	errno = 0;

	if (!arg || !*arg)
		return -1;
	res = strtoll(arg, &ptr, base);
	if (!ptr || ptr == arg || *ptr)
		return -1;
	if ((res == LLONG_MIN || res == LLONG_MAX) && errno == ERANGE)
		return -1;
	if (res > INT64_MAX || res < INT64_MIN)
		return -1;

	*val = res;
	return 0;
}

static int parse_batch_file(FILE *file, struct schedule *schedule, size_t max_entries)
{
	int argc;
	char *arguments[MAX_ARGS];
	char **argv;
	size_t len;
	char *line = NULL;
	int err;

	if (getcmdline(&line, &len, file) < 0) {
		fprintf(stderr, "Could not read batch file\n");
		exit(EXIT_FAILURE);
	}

	argc = makeargs(line, arguments, MAX_ARGS);
	if (argc < 0) {
		fprintf(stderr, "Could not parse arguments\n");
		return -1;
	}

	argv = arguments;

	while (argc > 0) {
	        if (strcmp(*argv, "sched-entry") == 0) {
			struct sched_entry *e;

			if (schedule->num_entries >= max_entries) {
				fprintf(stderr, "The maximum number of schedule entries is %zu\n", max_entries);
				return -1;
			}

			e = &schedule->entries[schedule->num_entries];

			NEXT_ARG();
			err = str_to_entry_cmd(*argv);
			if (err < 0) {
				fprintf(stderr, "Could not parse command (found %s)\n", *argv);
				return  -1;
			}
			e->command = err;

			NEXT_ARG();
			if (get_u32(&e->gatemask, *argv, 16)) {
				fprintf(stderr, "Could not parse gatemask (found %s)\n", *argv);
				return -1;
			}

			NEXT_ARG();
			if (get_u32(&e->interval, *argv, 0)) {
				fprintf(stderr, "Could not parse interval (found %s)\n", *argv);
				return -1;
			}

			schedule->num_entries++;

		} else if (strcmp(*argv, "base-time") == 0) {
			NEXT_ARG();
			if (get_s64(&schedule->base_time, *argv, 10)) {
				fprintf(stderr, "Could not parse base-time (found %s)\n", *argv);
				return -1;
			}
		}
		argc--; argv++;
	}

	return 0;
}

/* libpcap re-uses the timeval struct for nanosecond resolution when
 * PCAP_TSTAMP_PRECISION_NANO is specified.
 */
static uint64_t tv_to_nanos(const struct timeval *tv)
{
	return tv->tv_sec * NSEC_TO_SEC + tv->tv_usec;
}

static struct sched_entry *next_entry(struct schedule *schedule)
{
	schedule->current_entry++;

	if (schedule->current_entry >= schedule->num_entries)
		schedule->current_entry = 0;

	return &schedule->entries[schedule->current_entry];
}

static struct sched_entry *first_entry(struct schedule *schedule)
{
	schedule->current_entry = 0;

	return &schedule->entries[0];
}

static struct sched_entry *advance_until(struct schedule *schedule,
					 uint64_t ts, uint64_t *now)
{
	struct sched_entry *first, *entry;
	uint64_t cycle = 0;
	uint64_t n;

	entry = first = first_entry(schedule);

	if (!schedule->cycle_time) {
		do {
			cycle += entry->interval;
			entry = next_entry(schedule);
		} while (entry != first);

		schedule->cycle_time = cycle;
	}

	cycle = schedule->cycle_time;

	n = (ts - schedule->base_time) / cycle;
	*now = schedule->base_time + (n * cycle);

	do {
		if (*now + entry->interval > ts)
			break;

		*now += entry->interval;
		entry = next_entry(schedule);
	} while (true);

	return entry;
}

static int match_packet(const struct tc_filter *filters, int num_filters,
			const struct pcap_pkthdr *hdr,
			const uint8_t *frame)
{
	int err;
	int i;

	for (i = 0; i < num_filters; i++) {
		const struct tc_filter *f = &filters[i];

		err = pcap_offline_filter(&f->prog, hdr, frame);
		if (!err) {
			/* The filter for traffic class 'i' doesn't
			 * match the packet
			 */
			continue;
		}

		return i;
	}

	/* returning 'num_filters' means that the packet matches none
	 * of the filters, so it's a Best Effort packet.
	 */
	return num_filters;
}

static int classify_frames(pcap_t *handle, const struct tc_filter *tc_filters,
			   int num_filters, struct schedule *schedule)
{
	struct sched_entry *entry;
	struct pcap_pkthdr *hdr;
	const uint8_t *frame;
	uint64_t now, ts;
	int err;

	now = schedule->base_time;

	/* Ignore frames until we get to the base_time of the
	 * schedule. */
	do {
		err = pcap_next_ex(handle, &hdr, &frame);
		if (err < 0) {
			pcap_perror(handle, "pcap_next_ex");
			return -EINVAL;
		}

		ts = tv_to_nanos(&hdr->ts);
	} while (ts <= now);

	do {
		const char *name, *ontime;
		int64_t offset;
		int tc;

		ts = tv_to_nanos(&hdr->ts);

		entry = advance_until(schedule, ts, &now);

		tc = match_packet(tc_filters, num_filters, hdr, frame);

		if (tc < num_filters)
			name = tc_filters[tc].name;
		else
			name = "BE";

		if (entry->gatemask & (1 << tc))
			ontime = "ontime";
		else
			ontime = "late";

		offset = ts - now;

		/* XXX: what more information might we need? */
		printf("%" PRIu64 " %" PRIu64 " \"%s\" \"%s\" %" PRId64 " %#x\n",
		       ts, now, name, ontime, offset, entry->gatemask);
	} while (pcap_next_ex(handle, &hdr, &frame) >= 0);

	return 0;
}

static void free_filters(struct tc_filter *filters, int num_filters)
{
	int i;

	for (i = 0; i < num_filters; i++) {
		struct tc_filter *f = &filters[i];

		free(f->name);
	}
}

int main(int argc, char **argv)
{
	char errbuf[PCAP_ERRBUF_SIZE];
	pcap_t *handle;
	int err, num;

	argp_parse(&argp, argc, argv, 0, NULL, NULL);

	if (!dump_file || !batch_file || !filters_file) {
		usage();
		exit(EXIT_FAILURE);
	}

	err = parse_batch_file(batch_file, &schedule, NUM_ENTRIES);
	if (err < 0) {
		fprintf(stderr, "Could not parse schedule file (or file empty)\n");
		exit(EXIT_FAILURE);
	}

	handle = pcap_fopen_offline_with_tstamp_precision(
		dump_file, PCAP_TSTAMP_PRECISION_NANO, errbuf);
	if (!handle) {
		fprintf(stderr, "Could not parse dump file\n");
		exit(EXIT_FAILURE);
	}

	num = parse_filters(handle, filters_file,
			    traffic_filters, NUM_FILTERS);
	if (err < 0) {
		fprintf(stderr, "Could not filters file\n");
		exit(EXIT_FAILURE);
	}

	err = classify_frames(handle, traffic_filters, num, &schedule);
	if (err < 0) {
		fprintf(stderr, "Could not classify frames\n");
		exit(EXIT_FAILURE);
	}

	free_filters(traffic_filters, num);

	pcap_close(handle);

	return 0;
}

## l2_tai.c
/*
 * This program demonstrates transmission of L2 frames using the
 * system TAI timer.
 *
 * Copyright (c) 2018, Intel Corporation
 *
 * Copyright (C) 2017 linutronix GmbH
 *
 * Large portions taken from the linuxptp stack.
 * Copyright (C) 2011, 2012 Richard Cochran <richardcochran@gmail.com>
 *
 * Some portions taken from the sgd test program.
 * Copyright (C) 2015 linutronix GmbH
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */
#define _GNU_SOURCE /*for CPU_SET*/
#include <errno.h>
#include <ifaddrs.h>
#include <linux/errqueue.h>
#include <linux/if_ether.h>
#include <linux/if_packet.h>
#include <net/if.h>
#include <netinet/in.h>
#include <poll.h>
#include <pthread.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/ioctl.h>
#include <unistd.h>

#define ONE_SEC			1000000000ULL
#define DEFAULT_PERIOD		1000000
#define DEFAULT_DELAY		500000
#define DEFAULT_PRIORITY	3
#define MARKER			'a'

#ifndef SO_TXTIME
#define SO_TXTIME		61
#define SCM_TXTIME		SO_TXTIME
#endif

#ifndef SO_EE_ORIGIN_TXTIME
#define SO_EE_ORIGIN_TXTIME		6
#define SO_EE_CODE_TXTIME_INVALID_PARAM	1
#define SO_EE_CODE_TXTIME_MISSED	2
#endif

#define pr_err(s)	fprintf(stderr, s "\n")
#define pr_info(s)	fprintf(stdout, s "\n")

/* The API for SO_TXTIME is the below struct and enum, which will be
 * provided by uapi/linux/net_tstamp.h in the near future.
 */
struct sock_txtime {
	clockid_t clockid;
	uint16_t flags;
};

enum txtime_flags {
	SOF_TXTIME_DEADLINE_MODE = (1 << 0),
	SOF_TXTIME_REPORT_ERRORS = (1 << 1),

	SOF_TXTIME_FLAGS_LAST = SOF_TXTIME_REPORT_ERRORS,
	SOF_TXTIME_FLAGS_MASK = (SOF_TXTIME_FLAGS_LAST - 1) |
				 SOF_TXTIME_FLAGS_LAST
};


static int running = 1, use_so_txtime = 1;
static int period_nsec = DEFAULT_PERIOD;
static int waketx_delay = DEFAULT_DELAY;
static int so_priority = DEFAULT_PRIORITY;
static int use_deadline_mode = 0;
static int receive_errors = 0;
static uint64_t base_time = 0;
static uint8_t mac_addr[ETH_ALEN] = {0};
static struct sock_txtime sk_txtime;
static struct sockaddr_ll addr = {0};

static void normalize(struct timespec *ts)
{
	while (ts->tv_nsec > 999999999) {
		ts->tv_sec += 1;
		ts->tv_nsec -= ONE_SEC;
	}

	while (ts->tv_nsec < 0) {
		ts->tv_sec -= 1;
		ts->tv_nsec += ONE_SEC;
	}
}

static int sk_interface_index(int fd, const char *name)
{
	struct ifreq ifreq;
	int err;

	memset(&ifreq, 0, sizeof(ifreq));
	strncpy(ifreq.ifr_name, name, sizeof(ifreq.ifr_name) - 1);
	err = ioctl(fd, SIOCGIFINDEX, &ifreq);
	if (err < 0) {
		pr_err("ioctl SIOCGIFINDEX failed: %m");
		return err;
	}
	return ifreq.ifr_ifindex;
}

static int l2_open_socket(const char *name, clockid_t clkid)
{
	int fd, index, on = 1;
	addr.sll_family = AF_PACKET,
	addr.sll_protocol = htons(ETH_P_TSN),
	addr.sll_halen = ETH_ALEN,

	fd = socket(AF_PACKET, SOCK_DGRAM, htons(ETH_P_TSN));
	if (fd < 0) {
		pr_err("socket failed: %m");
		goto no_socket;
	}

	index = sk_interface_index(fd, name);
	if (index < 0)
		goto no_option;

	addr.sll_ifindex = index;

	if (setsockopt(fd, SOL_SOCKET, SO_PRIORITY, &so_priority, sizeof(so_priority))) {
		pr_err("Couldn't set priority");
		goto no_option;
	}

	memcpy(&addr.sll_addr, mac_addr, ETH_ALEN);

	sk_txtime.clockid = clkid;
	sk_txtime.flags = (use_deadline_mode | receive_errors);
	if (use_so_txtime && setsockopt(fd, SOL_SOCKET, SO_TXTIME, &sk_txtime, sizeof(sk_txtime))) {
		pr_err("setsockopt SO_TXTIME failed: %m");
		goto no_option;
	}

	return fd;
no_option:
	close(fd);
no_socket:
	return -1;
}

static int l2_send(int fd, void *buf, int len, __u64 txtime)
{
	char control[CMSG_SPACE(sizeof(txtime))] = {};
	struct cmsghdr *cmsg;
	struct msghdr msg;
	struct iovec iov;
	ssize_t cnt;

	iov.iov_base = buf;
	iov.iov_len = len;

	memset(&msg, 0, sizeof(msg));
	msg.msg_name = &addr;
	msg.msg_namelen = sizeof(addr);
	msg.msg_iov = &iov;
	msg.msg_iovlen = 1;

	/*
	 * We specify the transmission time in the CMSG.
	 */
	if (use_so_txtime) {
		msg.msg_control = control;
		msg.msg_controllen = sizeof(control);

		cmsg = CMSG_FIRSTHDR(&msg);
		cmsg->cmsg_level = SOL_SOCKET;
		cmsg->cmsg_type = SCM_TXTIME;
		cmsg->cmsg_len = CMSG_LEN(sizeof(__u64));
		*((__u64 *) CMSG_DATA(cmsg)) = txtime;
	}

	cnt = sendmsg(fd, &msg, 0);
	if (cnt < 1) {
		pr_err("sendmsg failed: %m");
		return cnt;
	}

	return cnt;
}

static unsigned char tx_buffer[256];

static int process_socket_error_queue(int fd)
{
	uint8_t msg_control[CMSG_SPACE(sizeof(struct sock_extended_err))];
	unsigned char err_buffer[sizeof(tx_buffer)];
	struct sock_extended_err *serr;
	struct cmsghdr *cmsg;
	__u64 tstamp = 0;

	struct iovec iov = {
	        .iov_base = err_buffer,
	        .iov_len = sizeof(err_buffer)
	};
	struct msghdr msg = {
	        .msg_iov = &iov,
	        .msg_iovlen = 1,
	        .msg_control = msg_control,
	        .msg_controllen = sizeof(msg_control)
	};

	if (recvmsg(fd, &msg, MSG_ERRQUEUE) == -1) {
		pr_err("recvmsg failed");
	        return -1;
	}

	cmsg = CMSG_FIRSTHDR(&msg);
	while (cmsg != NULL) {
		serr = (void *) CMSG_DATA(cmsg);
		if (serr->ee_origin == SO_EE_ORIGIN_TXTIME) {
			tstamp = ((__u64) serr->ee_data << 32) + serr->ee_info;

			switch(serr->ee_code) {
			case SO_EE_CODE_TXTIME_INVALID_PARAM:
				fprintf(stderr, "packet with tstamp %llu dropped due to invalid params\n", tstamp);
				return 0;
			case SO_EE_CODE_TXTIME_MISSED:
				fprintf(stderr, "packet with tstamp %llu dropped due to missed deadline\n", tstamp);
				return 0;
				default:
					return -1;
			}
		}

		cmsg = CMSG_NXTHDR(&msg, cmsg);
	}

	return 0;
}

static int run_nanosleep(clockid_t clkid, int fd)
{
	struct timespec ts;
	int cnt, err;
	__u64 txtime;
	struct pollfd p_fd = {
		.fd = fd,
	};

	memset(tx_buffer, MARKER, sizeof(tx_buffer));

	/* If no base-time was specified, start one to two seconds in the
	 * future.
	 */
	if (base_time == 0) {
		clock_gettime(clkid, &ts);
		ts.tv_sec += 1;
		ts.tv_nsec = ONE_SEC - waketx_delay;
	} else {
		ts.tv_sec = base_time / ONE_SEC;
		ts.tv_nsec = (base_time % ONE_SEC) - waketx_delay;
	}

	normalize(&ts);

	txtime = ts.tv_sec * ONE_SEC + ts.tv_nsec;
	txtime += waketx_delay;

	fprintf(stderr, "\ntxtime of 1st packet is: %llu", txtime);

	while (running) {
		memcpy(tx_buffer, &txtime, sizeof(__u64));
		err = clock_nanosleep(clkid, TIMER_ABSTIME, &ts, NULL);
		switch (err) {
		case 0:
			cnt = l2_send(fd, tx_buffer, sizeof(tx_buffer), txtime);
			if (cnt != sizeof(tx_buffer)) {
				pr_err("send failed");
			}
			ts.tv_nsec += period_nsec;
			normalize(&ts);
			txtime += period_nsec;

			/* Check if errors are pending on the error queue. */
			err = poll(&p_fd, 1, 0);
			if (err == 1 && p_fd.revents & POLLERR) {
				if (!process_socket_error_queue(fd))
					return -ECANCELED;
			}

			break;
		case EINTR:
			continue;
		default:
			fprintf(stderr, "clock_nanosleep returned %d: %s",
				err, strerror(err));
			return err;
		}
	}

	return 0;
}

static int set_realtime(pthread_t thread, int priority, int cpu)
{
	cpu_set_t cpuset;
	struct sched_param sp;
	int err, policy;

	int min = sched_get_priority_min(SCHED_FIFO);
	int max = sched_get_priority_max(SCHED_FIFO);

	fprintf(stderr, "min %d max %d\n", min, max);

	if (priority < 0) {
		return 0;
	}

	err = pthread_getschedparam(thread, &policy, &sp);
	if (err) {
		fprintf(stderr, "pthread_getschedparam: %s\n", strerror(err));
		return -1;
	}

	sp.sched_priority = priority;

	err = pthread_setschedparam(thread, SCHED_FIFO, &sp);
	if (err) {
		fprintf(stderr, "pthread_setschedparam: %s\n", strerror(err));
		return -1;
	}

	if (cpu < 0) {
		return 0;
	}
	CPU_ZERO(&cpuset);
	CPU_SET(cpu, &cpuset);
	err = pthread_setaffinity_np(thread, sizeof(cpu_set_t), &cpuset);
	if (err) {
		fprintf(stderr, "pthread_setaffinity_np: %s\n", strerror(err));
		return -1;
	}

	return 0;
}

static void usage(char *progname)
{
	fprintf(stderr,
		"\n"
		"usage: %s [options]\n"
		"\n"
		" -c [num]      run on CPU 'num'\n"
		" -d [num]      delta from wake up to txtime in nanoseconds (default %d)\n"
		" -h            prints this message and exits\n"
		" -i [name]     use network interface 'name'\n"
		" -p [num]      run with RT priorty 'num'\n"
		" -P [num]      period in nanoseconds (default %d)\n"
		" -s            do not use SO_TXTIME\n"
		" -t [num]      set SO_PRIORITY to 'num' (default %d)\n"
		" -D            set deadline mode for SO_TXTIME\n"
		" -E            enable error reporting on the socket error queue for SO_TXTIME\n"
		" -b [tstamp]   txtime of 1st packet as a 64bit [tstamp]. Default: now + ~2seconds\n"
		" -m [mac_addr] dst MAC address\n"
		"\n",
		progname, DEFAULT_DELAY, DEFAULT_PERIOD, DEFAULT_PRIORITY);
}

int main(int argc, char *argv[])
{
	int c, cpu = -1, err, fd, priority = -1;
	clockid_t clkid = CLOCK_TAI;
	char *iface = NULL, *progname;

	/* Process the command line arguments. */
	progname = strrchr(argv[0], '/');
	progname = progname ? 1 + progname : argv[0];
	while (EOF != (c = getopt(argc, argv, "c:d:hi:p:P:st:DEb:m:"))) {
		switch (c) {
		case 'c':
			cpu = atoi(optarg);
			break;
		case 'd':
			waketx_delay = atoi(optarg);
			break;
		case 'h':
			usage(progname);
			return 0;
		case 'i':
			iface = optarg;
			break;
		case 'p':
			priority = atoi(optarg);
			break;
		case 'P':
			period_nsec = atoi(optarg);
			break;
		case 's':
			use_so_txtime = 0;
			break;
		case 't':
			so_priority = atoi(optarg);
			break;
		case 'D':
			use_deadline_mode = SOF_TXTIME_DEADLINE_MODE;
			break;
		case 'E':
			receive_errors = SOF_TXTIME_REPORT_ERRORS;
			break;
		case 'b':
			base_time = atoll(optarg);
			break;
		case 'm':
			err = sscanf(optarg, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
				&mac_addr[0], &mac_addr[1], &mac_addr[2],
				&mac_addr[3], &mac_addr[4], &mac_addr[5]);
			if (err != 6) {
				printf("Invalid MAC address\n");
				return -1;
			}

			break;
		case '?':
			usage(progname);
			return -1;
		}
	}

	if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0) {
		pr_err("Destination MAC Address must be specified.");
		usage(progname);
		return -1;
	}

	if (waketx_delay > 999999999 || waketx_delay < 0) {
		pr_err("Bad wake up to transmission delay.");
		usage(progname);
		return -1;
	}

	if (period_nsec < 1000) {
		pr_err("Bad period.");
		usage(progname);
		return -1;
	}

	if (!iface) {
		pr_err("Need a network interface.");
		usage(progname);
		return -1;
	}

	if (set_realtime(pthread_self(), priority, cpu)) {
		return -1;
	}

	fd = l2_open_socket(iface, clkid);
	if (fd < 0) {
		return -1;
	}

	err = run_nanosleep(clkid, fd);

	close(fd);
	return err;
}

## Makefile
PCAP_CFLAGS=$(shell pcap-config --cflags --libs)

all: dump-classifier udp_tai

dump-classifier: dump-classifier.c
	${CC} ${CFLAGS} $(PCAP_CFLAGS) -o $@ $<

udp_tai: udp_tai.c
	${CC} ${CFLAGS} -lpthread -o $@ $<

clean:
	@rm dump-classifier
	@rm udp_tai

.PHONY: clean debug

## run-udp-tai-tc0.sh
#!/bin/sh
#
# Copyright (c) 2018, Intel Corporation
#
# SPDX-License-Identifier: BSD-3-Clause
#

IFACE=$1

if [ -z $IFACE ]; then
    echo "You must provide the network interface as first argument"
    exit -1
fi

# Now plus 1 minute
PLUS_1MIN=$((`date +%s%N` + 37000000000 + (60 * 1000000000)))

# Base will the next "round" timestamp ~1 min from now, plus 250us
BASE=$(($PLUS_1MIN - ( $PLUS_1MIN % 1000000000 ) + 250000))

sudo ./udp_tai -i $IFACE -b $BASE -P 1000000 -t 3 -p 90 -d 600000 -u 7788

## setup_clock_sync.sh
#!/bin/bash
#
# Copyright (c) 2018, Intel Corporation
#
# SPDX-License-Identifier: BSD-3-Clause
#

#
# DISCLAIMER
#
# This script is meant for testing purposes only.
# It provides an oversimplified approach for having a simple PTP
# network up and running, with each local node having its CLOCK_TAI
# offset adjusted.
#
# TODO:
#	- 	find a way to fetch the TAI offset from ptp4l directly. Ivan
#		suggested using pmc for that.
#

set -e

INTERFACE=none
TAI_OFFSET=37
PTP4L_VERBOSE=''
PHC2SYS_VERBOSE=''
if [ -z $PTP4L ]; then
	PTP4L=$(which ptp4l)
fi
if [ -z $PHC2SYS ]; then
	PHC2SYS=$(which phc2sys)
fi


# On the PTP master, if started with -M parameter, synchronize the
# system clock to PHC first, then propagate that to network using ptp4l.
# We trust that the system clock was initially setup correctly or adjusted
# to some other source (i.e. NTP, GPS, etc).
#
# For this -M mode, clocks are kept synchronized by phc2sys.
# This is provided for the scenarios in which the PTP master on this network
# is also running one end of the TSN application (either the listener or the
# talker), which requires the local clocks to be synchronized.
#
# When that isn't the case (i.e. the etf experiment, in which all we care
# about is the network clock sync), then just start this script with -m
# instead so phc2sys is not used and the jitter of the network clock sync is
# not affected.
#
setup_ptp_master() {
	ptp4l -2 -i $INTERFACE $PTP4L_VERBOSE &
}

setup_ptp_master_and_sync() {
	phc2sys -c $INTERFACE -s CLOCK_REALTIME -w $PHC2SYS_VERBOSE &
	setup_ptp_master
}


# On PTP slaves, first synchronize the PHC to the PTP master,
# then synchronize the system clock to the PHC.
setup_ptp_slave() {
	phc2sys -a -r $PHC2SYS_VERBOSE &
	ptp4l -2 -s -i $INTERFACE $PTP4L_VERBOSE &
}


# Use adjtimex to set the TAI offset to CLOCK_TAI.
adjust_clock_tai_offset() {
	tmp_src=$(mktemp /tmp/XXXXXX.c)
	tmp_bin=$(mktemp)
	cat <<EOF > $tmp_src
#include <stdio.h>
#include <stdlib.h>
#include <sys/timex.h>

int main(void)
{
	struct timex timex = {
		.modes		= ADJ_TAI,
		.constant	= $TAI_OFFSET
	};

	if (adjtimex(&timex) == -1) {
		perror("adjtimex failed to set CLOCK_TAI offset");
		return EXIT_FAILURE;
	}

	return EXIT_SUCCESS;
}
EOF

	gcc -o $tmp_bin $tmp_src
	$tmp_bin
	rm -f $tmp_bin $tmp_src
}


test_dependencies() {
	if [ ! -x $PTP4L ]; then
		echo "ptp4l must be available from your \$PATH or set \$PTP4L."
		exit -1
	fi
	if [ ! -x $PHC2SYS ]; then
		echo "phc2sys must be available from your \$PATH or set \$PHC2SYS."
		exit -1
	fi
}


test_dependencies

ptp_master_mode=f
while getopts "Mmsvi:" opt; do
	case ${opt} in
	i)	INTERFACE=$OPTARG ;;
	m)	ptp_master_mode=y ;;
	s)	ptp_master_mode=n ;;
	M)	ptp_master_mode=M ;;
	v)	PTP4L_VERBOSE='-m --summary_interval=5' ;
		PHC2SYS_VERBOSE='-m -u 20' ;;
	*)	exit -1 ;;
	esac
done

if [ ${INTERFACE} = none ]; then
	echo "You must set the network interface using '-i'."
	exit -1
fi

if [ ${ptp_master_mode} = y ]; then
	setup_ptp_master
	adjust_clock_tai_offset
elif [ ${ptp_master_mode} = M ]; then
	setup_ptp_master_and_sync
	adjust_clock_tai_offset
elif [ ${ptp_master_mode} = n ]; then
	setup_ptp_slave
	adjust_clock_tai_offset
else
	echo "You must select PTP master (-m) OR PTP slave (-s) mode."
	exit -1
fi


## txtime_offset_stats.py
#!/usr/bin/env python3
#
# Copyright (c) 2018, Intel Corporation
#
# SPDX-License-Identifier: BSD-3-Clause
#

# Expected input file format is a CSV file with:
#
# <FRAME_NUMBER, FRAME_ARRIVAL_TIME, FRAME_PAYLOAD_BYTES>
# E.g.:
# 1,1521534608.000000456,00:38:89:bd:a1:93:1d:15:(...)
# 2,1521534608.001000480,00:38:89:bd:a1:93:1d:15:(...)
#
# Frame number:         sequence number for each frame
# Frame arrival time:   Rx HW timestamp for each frame
# Frame Payload:        payload starting with 64bit timestamp (txtime)
#
# This can be easily generated with tshark with the following command line:
#  $ tshark -r CAPTURE.pcap -t e -E separator=, -T fields -e frame.number \
#           -e frame.time_epoch \
#           -e data.data > DATA.out
#
import argparse
import csv
import struct
import math
import sys

# TAI to UTC offset. Currently that is 37 seconds.
TAI_OFFSET = 37000000000


def compute_offsets_stats(file_path):
    with open(file_path) as f:
        count = mean = total_sqr_dist = 0.0
        min_t = sys.maxsize
        max_t = -sys.maxsize

        for line in csv.reader(f):
            arrival_tstamp = int(line[1].replace('.', ''))
            data = line[2].split(':')
            txtime = ''.join(data[0:8])
            txtime = bytearray.fromhex(txtime)
            txtime = struct.unpack('<Q', txtime)

            val = float(arrival_tstamp - txtime[0])
            val = (val - TAI_OFFSET) if val > TAI_OFFSET else val

            # Update statistics.
            # Compute the mean and variance online using Welford's algorithm.
            count += 1
            min_t = val if val < min_t else min_t
            max_t = val if val > max_t else max_t

            delta = val - mean
            mean = mean + (delta / count)
            new_delta = val - mean
            total_sqr_dist += delta * new_delta

        if count != 0.0:
            variance = total_sqr_dist / (count - 1)
            std_dev = math.sqrt(variance)

            print("min:\t\t%e" % min_t)
            print("max:\t\t%e" % max_t)
            print("jitter (pk-pk):\t%e" % (max_t - min_t))
            print("avg:\t\t%e" % mean)
            print("std dev:\t%e" % std_dev)
            print("count:\t\t%d" % count)


def main():
    parser = argparse.ArgumentParser()
    parser.add_argument(
        '-f', dest='file_path', default=None, type=str,
        help='Path to input file (e.g. DATA.out) generated by tshark with:\
                tshark -r CAPTURE.pcap -t e -E separator=, -T\
                fields -e frame.number -e frame.time_epoch\
                -e data.data > DATA.out')

    args = parser.parse_args()

    if args.file_path is not None:
        compute_offsets_stats(args.file_path)
    else:
        parser.print_help()


if __name__ == "__main__":
    main()

## udp_tai.c
/*
 * This program demonstrates transmission of UDP packets using the
 * system TAI timer.
 *
 * Copyright (C) 2017 linutronix GmbH
 *
 * Large portions taken from the linuxptp stack.
 * Copyright (C) 2011, 2012 Richard Cochran <richardcochran@gmail.com>
 *
 * Some portions taken from the sgd test program.
 * Copyright (C) 2015 linutronix GmbH
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License along
 * with this program; if not, write to the Free Software Foundation, Inc.,
 * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
 */
#define _GNU_SOURCE /*for CPU_SET*/
#include <arpa/inet.h>
#include <errno.h>
#include <fcntl.h>
#include <ifaddrs.h>
#include <linux/errqueue.h>
#include <linux/ethtool.h>
#include <linux/net_tstamp.h>
#include <linux/sockios.h>
#include <net/if.h>
#include <netinet/in.h>
#include <poll.h>
#include <pthread.h>
#include <sched.h>
#include <signal.h>
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
#include <sys/ioctl.h>
#include <sys/socket.h>
#include <sys/stat.h>
#include <sys/types.h>
#include <unistd.h>

#define ONE_SEC			1000000000ULL
#define DEFAULT_PERIOD		1000000
#define DEFAULT_DELAY		500000
#define DEFAULT_PRIORITY	3
#define MCAST_IPADDR		"239.1.1.1"
#define UDP_PORT		7788
#define MARKER			'a'

#ifndef SO_TXTIME
#define SO_TXTIME		61
#define SCM_TXTIME		SO_TXTIME
#endif

#ifndef SO_EE_ORIGIN_TXTIME
#define SO_EE_ORIGIN_TXTIME		6
#define SO_EE_CODE_TXTIME_INVALID_PARAM	1
#define SO_EE_CODE_TXTIME_MISSED	2
#endif

#define pr_err(s)	fprintf(stderr, s "\n")
#define pr_info(s)	fprintf(stdout, s "\n")

/* The API for SO_TXTIME is the below struct and enum, which will be
 * provided by uapi/linux/net_tstamp.h in the near future.
 */
struct sock_txtime {
	clockid_t clockid;
	uint16_t flags;
};

enum txtime_flags {
	SOF_TXTIME_DEADLINE_MODE = (1 << 0),
	SOF_TXTIME_REPORT_ERRORS = (1 << 1),

	SOF_TXTIME_FLAGS_LAST = SOF_TXTIME_REPORT_ERRORS,
	SOF_TXTIME_FLAGS_MASK = (SOF_TXTIME_FLAGS_LAST - 1) |
				 SOF_TXTIME_FLAGS_LAST
};


static int running = 1, use_so_txtime = 1;
static int period_nsec = DEFAULT_PERIOD;
static int waketx_delay = DEFAULT_DELAY;
static int so_priority = DEFAULT_PRIORITY;
static int udp_port = UDP_PORT;
static int use_deadline_mode = 0;
static int receive_errors = 0;
static uint64_t base_time = 0;
static struct in_addr mcast_addr;
static struct sock_txtime sk_txtime;

static int mcast_bind(int fd, int index)
{
	int err;
	struct ip_mreqn req;
	memset(&req, 0, sizeof(req));
	req.imr_ifindex = index;
	err = setsockopt(fd, IPPROTO_IP, IP_MULTICAST_IF, &req, sizeof(req));
	if (err) {
		pr_err("setsockopt IP_MULTICAST_IF failed: %m");
		return -1;
	}
	return 0;
}

static int mcast_join(int fd, int index, const struct sockaddr *grp,
		      socklen_t grplen)
{
	int err, off = 0;
	struct ip_mreqn req;
	struct sockaddr_in *sa = (struct sockaddr_in *) grp;

	memset(&req, 0, sizeof(req));
	memcpy(&req.imr_multiaddr, &sa->sin_addr, sizeof(struct in_addr));
	req.imr_ifindex = index;
	err = setsockopt(fd, IPPROTO_IP, IP_ADD_MEMBERSHIP, &req, sizeof(req));
	if (err) {
		pr_err("setsockopt IP_ADD_MEMBERSHIP failed: %m");
		return -1;
	}
	err = setsockopt(fd, IPPROTO_IP, IP_MULTICAST_LOOP, &off, sizeof(off));
	if (err) {
		pr_err("setsockopt IP_MULTICAST_LOOP failed: %m");
		return -1;
	}
	return 0;
}

static void normalize(struct timespec *ts)
{
	while (ts->tv_nsec > 999999999) {
		ts->tv_sec += 1;
		ts->tv_nsec -= ONE_SEC;
	}

	while (ts->tv_nsec < 0) {
		ts->tv_sec -= 1;
		ts->tv_nsec += ONE_SEC;
	}
}

static int sk_interface_index(int fd, const char *name)
{
	struct ifreq ifreq;
	int err;

	memset(&ifreq, 0, sizeof(ifreq));
	strncpy(ifreq.ifr_name, name, sizeof(ifreq.ifr_name) - 1);
	err = ioctl(fd, SIOCGIFINDEX, &ifreq);
	if (err < 0) {
		pr_err("ioctl SIOCGIFINDEX failed: %m");
		return err;
	}
	return ifreq.ifr_ifindex;
}

static int open_socket(const char *name, struct in_addr mc_addr, short port, clockid_t clkid)
{
	struct sockaddr_in addr;
	int fd, index, on = 1;

	memset(&addr, 0, sizeof(addr));
	addr.sin_family = AF_INET;
	addr.sin_addr.s_addr = htonl(INADDR_ANY);
	addr.sin_port = htons(port);

	fd = socket(PF_INET, SOCK_DGRAM, IPPROTO_UDP);
	if (fd < 0) {
		pr_err("socket failed: %m");
		goto no_socket;
	}
	index = sk_interface_index(fd, name);
	if (index < 0)
		goto no_option;

	if (setsockopt(fd, SOL_SOCKET, SO_PRIORITY, &so_priority, sizeof(so_priority))) {
		pr_err("Couldn't set priority");
		goto no_option;
	}
	if (setsockopt(fd, SOL_SOCKET, SO_REUSEADDR, &on, sizeof(on))) {
		pr_err("setsockopt SO_REUSEADDR failed: %m");
		goto no_option;
	}
	if (bind(fd, (struct sockaddr *) &addr, sizeof(addr))) {
		pr_err("bind failed: %m");
		goto no_option;
	}
	if (setsockopt(fd, SOL_SOCKET, SO_BINDTODEVICE, name, strlen(name))) {
		pr_err("setsockopt SO_BINDTODEVICE failed: %m");
		goto no_option;
	}
	addr.sin_addr = mc_addr;
	if (mcast_join(fd, index, (struct sockaddr *) &addr, sizeof(addr))) {
		pr_err("mcast_join failed");
		goto no_option;
	}
	if (mcast_bind(fd, index)) {
		goto no_option;
	}

	sk_txtime.clockid = clkid;
	sk_txtime.flags = (use_deadline_mode | receive_errors);
	if (use_so_txtime && setsockopt(fd, SOL_SOCKET, SO_TXTIME, &sk_txtime, sizeof(sk_txtime))) {
		pr_err("setsockopt SO_TXTIME failed: %m");
		goto no_option;
	}

	return fd;
no_option:
	close(fd);
no_socket:
	return -1;
}

static int udp_open(const char *name, clockid_t clkid)
{
	int fd;

	if (!inet_aton(MCAST_IPADDR, &mcast_addr))
		return -1;

	fd = open_socket(name, mcast_addr, udp_port, clkid);

	return fd;
}

static int udp_send(int fd, void *buf, int len, __u64 txtime)
{
	char control[CMSG_SPACE(sizeof(txtime))] = {};
	struct sockaddr_in sin;
	struct cmsghdr *cmsg;
	struct msghdr msg;
	struct iovec iov;
	ssize_t cnt;

	memset(&sin, 0, sizeof(sin));
	sin.sin_family = AF_INET;
	sin.sin_addr = mcast_addr;
	sin.sin_port = htons(udp_port);

	iov.iov_base = buf;
	iov.iov_len = len;

	memset(&msg, 0, sizeof(msg));
	msg.msg_name = &sin;
	msg.msg_namelen = sizeof(sin);
	msg.msg_iov = &iov;
	msg.msg_iovlen = 1;

	/*
	 * We specify the transmission time in the CMSG.
	 */
	if (use_so_txtime) {
		msg.msg_control = control;
		msg.msg_controllen = sizeof(control);

		cmsg = CMSG_FIRSTHDR(&msg);
		cmsg->cmsg_level = SOL_SOCKET;
		cmsg->cmsg_type = SCM_TXTIME;
		cmsg->cmsg_len = CMSG_LEN(sizeof(__u64));
		*((__u64 *) CMSG_DATA(cmsg)) = txtime;
	}
	cnt = sendmsg(fd, &msg, 0);
	if (cnt < 1) {
		pr_err("sendmsg failed: %m");
		return cnt;
	}
	return cnt;
}

static unsigned char tx_buffer[256];

static int process_socket_error_queue(int fd)
{
	uint8_t msg_control[CMSG_SPACE(sizeof(struct sock_extended_err))];
	unsigned char err_buffer[sizeof(tx_buffer)];
	struct sock_extended_err *serr;
	struct cmsghdr *cmsg;
	__u64 tstamp = 0;

	struct iovec iov = {
	        .iov_base = err_buffer,
	        .iov_len = sizeof(err_buffer)
	};
	struct msghdr msg = {
	        .msg_iov = &iov,
	        .msg_iovlen = 1,
	        .msg_control = msg_control,
	        .msg_controllen = sizeof(msg_control)
	};

	if (recvmsg(fd, &msg, MSG_ERRQUEUE) == -1) {
		pr_err("recvmsg failed");
	        return -1;
	}

	cmsg = CMSG_FIRSTHDR(&msg);
	while (cmsg != NULL) {
		serr = (void *) CMSG_DATA(cmsg);
		if (serr->ee_origin == SO_EE_ORIGIN_TXTIME) {
			tstamp = ((__u64) serr->ee_data << 32) + serr->ee_info;

			switch(serr->ee_code) {
			case SO_EE_CODE_TXTIME_INVALID_PARAM:
				fprintf(stderr, "packet with tstamp %llu dropped due to invalid params\n", tstamp);
				return 0;
			case SO_EE_CODE_TXTIME_MISSED:
				fprintf(stderr, "packet with tstamp %llu dropped due to missed deadline\n", tstamp);
				return 0;
				default:
					return -1;
			}
		}

		cmsg = CMSG_NXTHDR(&msg, cmsg);
	}

	return 0;
}

static int run_nanosleep(clockid_t clkid, int fd)
{
	struct timespec ts;
	int cnt, err;
	__u64 txtime;
	struct pollfd p_fd = {
		.fd = fd,
	};

	memset(tx_buffer, MARKER, sizeof(tx_buffer));

	/* If no base-time was specified, start one to two seconds in the
	 * future.
	 */
	if (base_time == 0) {
		clock_gettime(clkid, &ts);
		ts.tv_sec += 1;
		ts.tv_nsec = ONE_SEC - waketx_delay;
	} else {
		ts.tv_sec = base_time / ONE_SEC;
		ts.tv_nsec = (base_time % ONE_SEC) - waketx_delay;
	}

	normalize(&ts);

	txtime = ts.tv_sec * ONE_SEC + ts.tv_nsec;
	txtime += waketx_delay;

	fprintf(stderr, "\ntxtime of 1st packet is: %llu", txtime);

	while (running) {
		memcpy(tx_buffer, &txtime, sizeof(__u64));
		err = clock_nanosleep(clkid, TIMER_ABSTIME, &ts, NULL);
		switch (err) {
		case 0:
			cnt = udp_send(fd, tx_buffer, sizeof(tx_buffer), txtime);
			if (cnt != sizeof(tx_buffer)) {
				pr_err("udp_send failed");
			}
			ts.tv_nsec += period_nsec;
			normalize(&ts);
			txtime += period_nsec;

			/* Check if errors are pending on the error queue. */
			err = poll(&p_fd, 1, 0);
			if (err == 1 && p_fd.revents & POLLERR) {
				if (!process_socket_error_queue(fd))
					return -ECANCELED;
			}

			break;
		case EINTR:
			continue;
		default:
			fprintf(stderr, "clock_nanosleep returned %d: %s",
				err, strerror(err));
			return err;
		}
	}

	return 0;
}

static int set_realtime(pthread_t thread, int priority, int cpu)
{
	cpu_set_t cpuset;
	struct sched_param sp;
	int err, policy;

	int min = sched_get_priority_min(SCHED_FIFO);
	int max = sched_get_priority_max(SCHED_FIFO);

	fprintf(stderr, "min %d max %d\n", min, max);

	if (priority < 0) {
		return 0;
	}

	err = pthread_getschedparam(thread, &policy, &sp);
	if (err) {
		fprintf(stderr, "pthread_getschedparam: %s\n", strerror(err));
		return -1;
	}

	sp.sched_priority = priority;

	err = pthread_setschedparam(thread, SCHED_FIFO, &sp);
	if (err) {
		fprintf(stderr, "pthread_setschedparam: %s\n", strerror(err));
		return -1;
	}

	if (cpu < 0) {
		return 0;
	}
	CPU_ZERO(&cpuset);
	CPU_SET(cpu, &cpuset);
	err = pthread_setaffinity_np(thread, sizeof(cpu_set_t), &cpuset);
	if (err) {
		fprintf(stderr, "pthread_setaffinity_np: %s\n", strerror(err));
		return -1;
	}

	return 0;
}

static void usage(char *progname)
{
	fprintf(stderr,
		"\n"
		"usage: %s [options]\n"
		"\n"
		" -c [num]      run on CPU 'num'\n"
		" -d [num]      delta from wake up to txtime in nanoseconds (default %d)\n"
		" -h            prints this message and exits\n"
		" -i [name]     use network interface 'name'\n"
		" -p [num]      run with RT priorty 'num'\n"
		" -P [num]      period in nanoseconds (default %d)\n"
		" -s            do not use SO_TXTIME\n"
		" -t [num]      set SO_PRIORITY to 'num' (default %d)\n"
		" -D            set deadline mode for SO_TXTIME\n"
		" -E            enable error reporting on the socket error queue for SO_TXTIME\n"
		" -b [tstamp]   txtime of 1st packet as a 64bit [tstamp]. Default: now + ~2seconds\n"
		" -u [port]     use udp port 'port'\n"
		"\n",
		progname, DEFAULT_DELAY, DEFAULT_PERIOD, DEFAULT_PRIORITY);
}

int main(int argc, char *argv[])
{
	int c, cpu = -1, err, fd, priority = -1;
	clockid_t clkid = CLOCK_TAI;
	char *iface = NULL, *progname;

	/* Process the command line arguments. */
	progname = strrchr(argv[0], '/');
	progname = progname ? 1 + progname : argv[0];
	while (EOF != (c = getopt(argc, argv, "c:d:hi:p:P:st:DEb:u:"))) {
		switch (c) {
		case 'c':
			cpu = atoi(optarg);
			break;
		case 'd':
			waketx_delay = atoi(optarg);
			break;
		case 'h':
			usage(progname);
			return 0;
		case 'i':
			iface = optarg;
			break;
		case 'p':
			priority = atoi(optarg);
			break;
		case 'P':
			period_nsec = atoi(optarg);
			break;
		case 's':
			use_so_txtime = 0;
			break;
		case 't':
			so_priority = atoi(optarg);
			break;
		case 'D':
			use_deadline_mode = SOF_TXTIME_DEADLINE_MODE;
			break;
		case 'E':
			receive_errors = SOF_TXTIME_REPORT_ERRORS;
			break;
		case 'b':
			base_time = atoll(optarg);
			break;
		case 'u':
			udp_port = atoi(optarg);
			break;
		case '?':
			usage(progname);
			return -1;
		}
	}

	if (waketx_delay > 999999999 || waketx_delay < 0) {
		pr_err("Bad wake up to transmission delay.");
		usage(progname);
		return -1;
	}

	if (period_nsec < 1000) {
		pr_err("Bad period.");
		usage(progname);
		return -1;
	}

	if (!iface) {
		pr_err("Need a network interface.");
		usage(progname);
		return -1;
	}

	if (set_realtime(pthread_self(), priority, cpu)) {
		return -1;
	}

	fd = udp_open(iface, clkid);
	if (fd < 0) {
		return -1;
	}

	err = run_nanosleep(clkid, fd);

	close(fd);
	return err;
}
	Here we provide a testing application and scripts that can be used
	to exercise the SO_TXTIME APIs, the etf qdisc and the taprio qdisc.

	The example is based on a sample application (udp_tai.c) provided by
	Richard Cochran as part of the RFC v1 of SO_TXTIME. We've extended
	it in several ways so it may be used as an example of different
	setups: per-packet Tx time only based systems, per-port Time-aware
	scheduler, and a combination of those.

	The documentation is split into 2 README files:

	- README.etf: Provides instructions for how to setup an example to
	use etf standalone. In other words, only Time-based
	transmission is used.

	- README.taprio: Provides instructions for how to setup an example
	to use etf and taprio together. That means using
	a Time-aware scheduler (i.e. 802.1Qbv) in conjunction
	time-based transmission for fine-grained control over
	the Tx time of packets.

	A custom tool known as 'dump-classifier' was developed so we can
	verify if a taprio schedule is being respected. For more information
	please check README.classifier .
	To help analyze taprio scheduling characteristics, we've developed a custom
	tool called 'dump-classifier'.


	dump-classifier
	===============

	dump-classifier aims to ease the test/verification of how well an
	implementation runs 802.1Qbv-like schedules.


	How to compile
	--------------

	* Dependencies:

	- libpcap-dev


	Just running 'make' should work, if all the dependencies are met:

	$ make


	How to run
	----------

	$ ./dump-classifier -s <BATCH FILE> -f <FILTER FILE> -d <DUMP FILE>

	<BATCH FILE> is a text file containg a batch file intended for use
	with 'tc -batch', this allows dump-classifier to use the same file
	used for configuring the qdiscs.

	Example:
	-----<cut
	qdisc replace dev enp3s0 parent root handle 100 taprio \
	num_tc 3 \
	map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
	queues 1@0 1@1 2@2 \
	base-time 1536883100000000000 \
	sched-entry S 01 300000 \
	sched-entry S 02 300000 \
	sched-entry S 04 400000 \
	clockid CLOCK_TAI

	qdisc replace dev enp3s0 parent 100:1 etf \
	offload delta 300000 clockid CLOCK_TAI

	qdisc replace dev enp3s0 parent 100:2 etf clockid CLOCK_TAI \
	delta 300000 offload deadline_mode
	----->end

	<FILTER FILE> allows different traffic classes to be indentified in a
	pcap dump file, it has the following format is contains a traffic
	class name and a pcap expression on each line, any traffic class that
	doesn't have a filter associated will be classified as "BE" (best
	effort). The order is important, as the first line will match the
	first traffic class (bit 0) in the gatemask parameter (the second
	field of each line of the schedule file), the second line will match
	the second traffic class (bit 1), and so on.

	Example:
	-----<cut
	talker :: ether dst aa:aa:aa:aa:aa:aa
	----->end

	<BASE TIME> an absolute time in nanoseconds where the schedule
	started, if that time is before the timestamp of the first packet in
	the <DUMP FILE>, the schedule will run until it reaches that
	timestamp, packets that have a timestamp before basetime will be
	ignored.

	<DUMP FILE> is a dump file captured via tcpdump, with timestamp
	precision in nanoseconds, so captured using something like this:

	$ tcpdump -j adapter_unsynced --time-stamp-precision=nanos -i enp2s0 -w dump.pcap
	Here we present the steps taken for setting up a test that uses only
	the ETF qdisc. That means that only Time-based transmission is exercised.

	The 'talker' side of the example described below will transmit a packet
	every 1ms. The packet's txtime is set through the SO_TXTIME api, and is
	copied into the packet's payload.

	At the 'listener' side, we capture traffic and then post-process it to
	compute the delta between each packet's arrival time and their txtime.

	ptp4l is used for synchronizing the PHC clocks over the network and
	phc2sys is used on the 'talker' size for synchronizing the system
	clock to the PHC.

	CLOCK_TAI is the reference clockid used throughout the example for the
	qdiscs and the applications.


	# LISTENER #

	1) Setup the PTP master. If using the listener end point as PTP
	master, setup_clock_sync.sh can be used as the below.

	e.g.: $ sudo ip addr add 192.168.0.78/4 broadcast 192.168.0.255 dev IFACE
	$ sudo ./setup_clock_sync.sh -i IFACE -m -v

	This script will start ptp4l so the PHC time is propagated to the
	network. The system clock and the PHC are NOT synchronized on that mode.

	* Note that the TAI offset is applied, so CLOCK_REALTIME will be in
	the UTC scale while CLOCK_TAI will be in the TAI scale, just like
	the PHC.



	2) Start capturing traffic on the listener end point. If we want to capture
	traffic for 1 minute, and are expecting 1 packet per milisecond:

	e.g.: $ sudo tcpdump -c 60000 -i enp3s0 -w tmp.pcap \
	-j adapter_unsynced -tt --time-stamp-precision=nano \
	udp port 7788



	# TALKER #

	3) Configure the Qdiscs on the talker side (Device Under Testing, DUT).
	Our DUT uses an Intel i210 NIC, and our setup here is as follows.

	1.a) First, we setup mqprio as the root qdisc:
	e.g.: $ sudo tc qdisc replace dev IFACE parent root handle 100 mqprio \
	num_tc 3 map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
	queues 1@0 1@1 2@2 hw 0

	1.b) Then we setup etf with the desired config:
	e.g.: $ sudo tc qdisc add dev enp2s0 parent 100:1 etf \
	offload clockid CLOCK_TAI delta 150000



	4) Setup the Device Under Testing (DUT) as PTP slave and synchronize
	the local clocks.

	e.g.: $ sudo ip addr add 192.168.0.77/4 broadcast 192.168.0.255 dev IFACE
	$ sudo ./setup_clock_sync.sh -i IFACE -s -v

	This script will start ptp4l so the PHC is synchronized to the PTP master,
	and then will synchronize the system clock to PHC using phc2sys.
	At this stage, based purely on empirical observations, one recommendation
	is waiting for the rms value reported by ptp4l to reach a value below 15 ns,
	and to remain somewhat constant after that.

	* Note that the TAI offset is applied, so CLOCK_REALTIME will be in the UTC
	scale while CLOCK_TAI will be in the TAI scale, just like the PHC.



	5) Optionally, build and run check_clocks on both PTP master and slave.

	e.g.: $ make check_clocks && sudo ./check_clocks IFACE

	It reports the timestamps fetched from CLOCK_REALTIME, CLOCK_TAI and
	the interface's PHC, as well the latency for reading from each clock
	and the delta between the PHC and the system clocks.
	You may use this information to verify if the offsets were applied
	correctly and if the PHC - CLOCK_TAI delta is not too high. Again,
	based on empirical observations, we consider this value as "good enough"
	if it's less than 25us, and it's been observed to get as low as 4us.



	6) Build and run udp_tai on the talker end station

	e.g.: $ gcc -o udp_tai -lpthread udp_tai.c
	$ sudo ./udp_tai -i enp2s0 -P 1000000 -p 90 -d 600000




	# LISTENER #

	7) Analyze traffic and generate statistics.
	We first use tshark for post-processing the pcap file as needed, then
	we use a custom python script to compute the packets' offset from their
	expected arrival time, and then compute statistics for the overall data set.

	e.g.: $ tshark -r tmp.pcap --disable-protocol dcp-etsi --disable-protocol \
	dcp-pft -t e -E separator=, -T fields -e frame.number \
	-e frame.time_epoch -e data.data > tmp.out

	$ ./txtime_offset_stats.py -f tmp.out



	# NOTE ON VLAN USAGE #

	If your tests require that VLAN tagging is performed by the end stations, then
	you must configure the kernel to do so. There are different ways to approach that,
	one of them is to create a vlan interface that knows how to map from a socket
	priority to the VLAN PCP.

	e.g.: $ ip link add link enp2s0 name enp2s0.2 type vlan id 2 egress 2:2 3:3
	$ ip link set dev enp2s0.2 up

	This maps socket priority 2 to PCP 2 and 3 to 3 for egress on a VLAN with id 2.
	The same can be done for ingress.
	Here we present the steps taken for setting up a test that uses both
	the ETF qdisc and the TAPRIO one. That means that we'll use a (Qbv-like)
	port scheduler with a fixed Tx schedule for traffic classes (TC), while
	using Time-based transmission for controlling the Tx time of packets within
	each TC.

	The 'talker' side of the example described below will have 2 applications
	transmitting time-sensitive traffic following a strict cyclic schedule.
	In addition to that, iperf3 is used to transmit best-effort traffic on the
	port. The port schedule is thus comprised by 3 time-slices, with a total
	cycle-time of 1 millisecond allocated as:

	- Traffic Class 0 (TC 0): duration of 300us, 'strict txtime' is used.
	- Traffic Class 1 (TC 1): duration of 300us, 'deadline txtime' is used.
	- Traffic Class 2 (TC 2): duration of 400us, best-effort traffic.

	The system is configured so the application enqueueing packets for
	TC 0 will set its packets Tx time with an offset of 250us within its
	time-slice.

	The application enqueueing packets for TC 1 will set its packets deadline
	with an offset of 250us within its time-slice. However, because this TC is
	using the deadline mode of SO_TXTIME + etf, then a packet maybe transmitted
	at anytime within its time slice that is before its deadline.

	Best-effort traffic is transmitted at anytime during the third time slice.

	A away to visualize this cycle and its time-slices is:

	\|______x_\|......D_\|bbbbbbbbbb\|
	0 299 599 999us


	The application for each time-sensitive traffic class will transmit a packet
	every 1ms. The packet's txtime is set through the SO_TXTIME api, and is
	copied into the packet's payload.

	At the 'listener' side, we capture traffic and then post-process it to
	verify if packets are arriving outside of the time-slice they belong to.

	ptp4l is used for synchronizing the PHC clocks over the network and
	phc2sys is used on the 'talker' size for synchronizing the system
	clock to the PHC.

	CLOCK_TAI is the reference clockid used throughout the example for the
	qdiscs and the applications.


	# NOTE ON VLAN USAGE #

	If your tests require that VLAN tagging is performed by the end stations, then
	you must configure the kernel to do so. There are different ways to approach that,
	one of them is to create a vlan interface that knows how to map from a socket
	priority to the VLAN PCP.

	e.g.: $ ip link add link enp2s0 name enp2s0.2 type vlan id 2 egress 2:2 3:3
	$ ip link set dev enp2s0.2 up

	This maps socket priority 2 to PCP 2 and 3 to 3 for egress on a VLAN with id 2.
	The same can be done for ingress.


	# TALKER #
	1) Setup network
	sudo ip addr add 192.168.0.77/4 broadcast 192.168.0.255 dev enp3s0

	2) Setup qdiscs

	The script 'config-taprio.sh', will configure taprio and ETF,
	automatically, with the same parameters explained below. It
	will also save on the 'taprio.batch' file the configuration
	used, so it can be used for analysis.

	The rest of Section 2 describes taprio and etf configuration
	parameters briefly.

	2.1) Setup taprio with a base-time starting in 2min from now rounded down.
	We must add the 37s UTC-TAI offset to the timestamp we get with 'date'.

	i=$((`date +%s%N` + 37000000000 + (2 * 60 * 1000000000))) ; \
	base=$(($i - ($i % 1000000000))) ; \
	tc qdisc replace dev enp3s0 parent root handle 100 taprio \
	num_tc 3 \
	map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
	queues 1@0 1@1 2@2 \
	base-time $base \
	sched-entry S 01 300000 \
	sched-entry S 02 300000 \
	sched-entry S 04 400000 \
	clockid CLOCK_TAI

	We can read the above as:
	- there are 3 traffic classes (num_tc 3);
	- SO_PRIORITY value 3 maps to TC 0, while value 2 maps to TC 1.
	Everything else maps to the other (best-effort) traffic classes;
	- "queues 0 1 2 2" is a positional argument, meaning that TC 0 maps
	to queue 0, TC 1 maps to queue 1 and TC 2 maps to queues 2 and 3.
	- gates.sched is used as schedule file;
	- the reference clock is CLOCK_TAI;


	2.2) Setup etf for queue TC 0:

	tc qdisc replace dev enp3s0 parent 100:1 etf clockid CLOCK_TAI \
	delta 200000 offload


	2.3) Setup etf in deadline mode for TC 1:

	tc qdisc replace dev enp3s0 parent 100:2 etf clockid CLOCK_TAI \
	delta 200000 offload deadline_mode


	3) Start time sync (ptp slave):
	sudo ./setup_clock_sync.sh -i enp3s0 -s -v


	4) Start iperf3 client:
	iperf3 -c 192.168.0.78 -t 600 --fq-rate 100M


	5) Start udp_tai for TC 0. Use a base-time starting in 1min from now + a
	250us offset for txtime:

	now=`date +%s%N` ; i=$(($now + 37000000000 + (60 * 1000000000))) ; \
	base=$(($i - ($i % 1000000000) + 250000)) ; \
	sudo ./udp_tai -i enp3s0 -b $base -P 1000000 -t 3 -p 90 -d 600000 \
	-u 7788

	To automate this process a little, the script
	'run-udp-tai-tc0.sh' is provided.

	6) Start udp_tai in deadline mode for TC 1. Use the txtime computed for
	the previous traffic class (above) and add 300us so it falls under the
	second time slice (TC 1). For example, if the instance of udp_tai executed
	on the previous step printed
	"txtime of 1st packet is: 1528320726000250000", then the now we should do:

	sudo ./udp_tai -i enp3s0 -t 2 -p 90 -D -d 600000 \
	-b 1528320726000550000 -u 7798

	# LISTENER #
	1) Setup network
	sudo ip addr add 192.168.0.78/4 broadcast 192.168.0.255 dev enp3s0


	2) Start time sync (ptp master)
	sudo ./setup_clock_sync.sh -i enp3s0 -m -v


	3) Start iperf server
	iperf3 -s


	4) Prepare 'dump-classifier' files. Running 'config-taprio.sh'
	should produce a 'taprio.batch' file, it will be used for
	verifying how well the schedule specified there was followed.
	Please refer to README.classifier for further information.

	--filters--
	talker_strict :: udp port 7788
	talker_deadline :: udp port 7798


	--taprio.batch--
	qdisc replace dev enp3s0 parent root handle 100 taprio \
	num_tc 3 \
	map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \
	queues 1@0 1@1 2@2 \
	base-time 1536883100000000000 \
	sched-entry S 01 300000 \
	sched-entry S 02 300000 \
	sched-entry S 04 400000 \
	clockid CLOCK_TAI

	qdisc replace dev enp3s0 parent 100:1 etf \
	offload delta 300000 clockid CLOCK_TAI

	qdisc replace dev enp3s0 parent 100:2 etf clockid CLOCK_TAI \
	delta 300000 offload deadline_mode

	5) Start capturing traffic:

	sudo tcpdump -c 600000 -i enp3s0 -w tmp.pcap -j adapter_unsynced \
	-tt --time-stamp-precision=nano

	6) Use the talkers to transmit packets as described on the next section.


	6) After traffic was captured, check if packets arrived outside of their
	time-slices. The base-time comes from the udp_tai for TC 0 minus the
	250us txtime offset as used below. For example:

	./dump-classifier -d tmp.pcap -f filter -s taprio.batch \| grep -v ontime
	/*
	* Copyright (c) 2018, Intel Corporation
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*
	*/

	#include <fcntl.h>
	#include <stdint.h>
	#include <stdio.h>
	#include <stdlib.h>
	#include <string.h>
	#include <time.h>
	#include <unistd.h>
	#include <linux/ethtool.h>
	#include <linux/sockios.h>
	#include <net/if.h>
	#include <sys/ioctl.h>

	#define ONE_SEC 1000000000ULL
	#define PTP_MAX_DEV_PATH 16

	/* fd to clockid helpers. Copied from posix-timers.h. */
	#define CLOCKFD 3
	static inline clockid_t make_process_cpuclock(const unsigned int pid,
	const clockid_t clock)
	{
	return ((~pid) << 3) \| clock;
	}

	static inline clockid_t fd_to_clockid(const int fd)
	{
	return make_process_cpuclock((unsigned int) fd, CLOCKFD);
	}

	static inline void open_phc_fd(int* fd_ptp, char* ifname)
	{
	struct ethtool_ts_info interface_info = {0};
	char ptp_path[PTP_MAX_DEV_PATH];
	struct ifreq req = {0};
	int fd_ioctl;

	/* Get PHC index */
	interface_info.cmd = ETHTOOL_GET_TS_INFO;
	snprintf(req.ifr_name, sizeof(req.ifr_name), "%s", ifname);
	req.ifr_data = (char *) &interface_info;

	fd_ioctl = socket(AF_INET, SOCK_DGRAM, 0);
	if (fd_ioctl < 0) {
	perror("Couldn't open socket");
	exit(EXIT_FAILURE);
	}

	if (ioctl(fd_ioctl, SIOCETHTOOL, &req) < 0) {
	perror("Couldn't issue SIOCETHTOOL ioctl");
	exit(EXIT_FAILURE);
	}

	snprintf(ptp_path, sizeof(ptp_path), "%s%d", "/dev/ptp",
	interface_info.phc_index);

	*fd_ptp = open(ptp_path, O_RDONLY);
	if (*fd_ptp < 0) {
	perror("Couldn't open the PTP fd. Did you forget to run with sudo again?");
	exit(EXIT_FAILURE);
	}

	close(fd_ioctl);
	}

	int main(int argc, char** argv)
	{
	struct timespec ts_rt1, ts_rt2, ts_ptp1, ts_ptp2, ts_tai1, ts_tai2;
	uint64_t rt, tai, ptp, lat_rt, lat_tai, lat_ptp;
	char ifname[IFNAMSIZ];
	int fd_ptp, err;

	if (argc < 2) {
	printf("You must run this as %s NET_IFACE (e.g. enp2s0)\n", argv[0]);
	return EXIT_FAILURE;
	}

	strncpy(ifname, argv[1], sizeof(ifname) - 1);
	open_phc_fd(&fd_ptp, ifname);

	/* Fetch timestamps for each clock. */
	clock_gettime(CLOCK_REALTIME, &ts_rt1);
	clock_gettime(CLOCK_TAI, &ts_tai1);
	clock_gettime(fd_to_clockid(fd_ptp), &ts_ptp1);
	rt = (ts_rt1.tv_sec * ONE_SEC) + ts_rt1.tv_nsec;
	tai = (ts_tai1.tv_sec * ONE_SEC) + ts_tai1.tv_nsec;
	ptp = (ts_ptp1.tv_sec * ONE_SEC) + ts_ptp1.tv_nsec;

	/* Compute clocks read latency. */
	clock_gettime(CLOCK_REALTIME, &ts_rt1);
	clock_gettime(CLOCK_REALTIME, &ts_rt2);
	lat_rt = ((ts_rt2.tv_sec * ONE_SEC) + ts_rt2.tv_nsec)
	- ((ts_rt1.tv_sec * ONE_SEC) + ts_rt1.tv_nsec);

	clock_gettime(CLOCK_TAI, &ts_tai1);
	clock_gettime(CLOCK_TAI, &ts_tai2);
	lat_tai = ((ts_tai2.tv_sec * ONE_SEC) + ts_tai2.tv_nsec)
	- ((ts_tai1.tv_sec * ONE_SEC) + ts_tai1.tv_nsec);

	clock_gettime(fd_to_clockid(fd_ptp), &ts_ptp1);
	clock_gettime(fd_to_clockid(fd_ptp), &ts_ptp2);
	lat_ptp = ((ts_ptp2.tv_sec * ONE_SEC) + ts_ptp2.tv_nsec)
	- ((ts_ptp1.tv_sec * ONE_SEC) + ts_ptp1.tv_nsec);

	printf("rt tstamp:\t%llu\n", rt);
	printf("tai tstamp:\t%llu\n", tai);
	printf("phc tstamp:\t%llu\n", ptp);
	printf("rt latency:\t%llu\n", lat_rt);
	printf("tai latency:\t%llu\n", lat_tai);
	printf("phc latency:\t%llu\n", lat_ptp);
	printf("phc-rt delta:\t%lld\n", ptp - rt);
	printf("phc-tai delta:\t%lld\n", ptp - tai);

	close(fd_ptp);

	return EXIT_SUCCESS;
	}
	#!/bin/bash
	#
	# Copyright (c) 2018, Intel Corporation
	#
	# SPDX-License-Identifier: BSD-3-Clause
	#

	IFACE=$1

	if [ -z $IFACE ]; then
	echo "You must provide the network interface as first argument"
	exit -1
	fi

	BATCH_FILE=etf.batch

	cat > $BATCH_FILE <<EOF
	qdisc replace dev $IFACE parent root handle 100 mqprio \\
	num_tc 3 \\
	map 2 2 1 0 2 2 2 2 2 2 2 2 2 2 2 2 \\
	queues 1@0 1@1 2@2 \\
	hw 0

	qdisc replace dev enp3s0 parent 100:1 etf \\
	offload delta 300000 clockid CLOCK_TAI

	qdisc replace dev enp3s0 parent 100:2 etf clockid CLOCK_TAI \\
	delta 300000 offload deadline_mode
	EOF

	tc -batch $BATCH_FILE
	/*
	* Copyright (c) 2018, Intel Corporation
	*
	* SPDX-License-Identifier: BSD-3-Clause
	*
	*/

	#include <argp.h>
	#include <inttypes.h>
	#include <pcap.h>
	#include <stdbool.h>
	#include <stdint.h>
	#include <stdio.h>
	#include <stdlib.h>
	#include <string.h>

	#define NSEC_TO_SEC 1e9

	#define NUM_FILTERS 8
	#define NUM_ENTRIES 64
	#define MAX_ARGS 100

	/* TAPRIO */
	enum {
	TC_TAPRIO_CMD_SET_GATES = 0x00,
	TC_TAPRIO_CMD_SET_AND_HOLD = 0x01,
	TC_TAPRIO_CMD_SET_AND_RELEASE = 0x02,
	};

	#define NEXT_ARG() \
	do { \
	argv++; \
	if (--argc <= 0) { \
	fprintf(stderr, "Incomplete command\n"); \
	exit(-1); \
	} \
	} while (0)

	enum traffic_flags {
	TRAFFIC_FLAGS_TXTIME,
	};

	struct tc_filter {
	char *name;
	struct bpf_program prog;
	unsigned int flags;
	};

	struct sched_entry {
	uint8_t command;
	uint32_t gatemask;
	uint32_t interval;
	};

	struct schedule {
	struct sched_entry entries[NUM_ENTRIES];
	int64_t base_time;
	size_t current_entry;
	size_t num_entries;
	int64_t cycle_time;
	};

	static struct argp_option options[] = {
	{"batch-file", 's', "BATCH_FILE", 0, "File containing the taprio configuration" },
	{"dump-file", 'd', "DUMP_FILE", 0, "File containing the tcpdump dump" },
	{"filters-file", 'f', "FILTERS_FILE", 0, "File containing the classfication filters" },
	{ 0 }
	};

	static struct tc_filter traffic_filters[NUM_FILTERS];
	static FILE batch_file, dump_file, *filters_file;
	static struct schedule schedule;

	static error_t parser(int key, char arg, struct argp_state state)
	{
	switch (key) {
	case 's':
	batch_file = fopen(arg, "r");
	if (!batch_file) {
	perror("Could not open file, fopen");
	exit(EXIT_FAILURE);
	}
	break;
	case 'd':
	dump_file = fopen(arg, "r");
	if (!dump_file) {
	perror("Could not open file, fopen");
	exit(EXIT_FAILURE);
	}
	break;
	case 'f':
	filters_file = fopen(arg, "r");
	if (!filters_file) {
	perror("Could not open file, fopen");
	exit(EXIT_FAILURE);
	}
	break;
	}

	return 0;
	}

	static struct argp argp = { options, parser };

	static void usage(void)
	{
	fprintf(stderr, "dump-classifier -s <tc batch file> -d <dump-file> -f <filters-file>\n");
	}

	/* split command line into argument vector */
	int makeargs(char line, char argv[], int max_args)
	{
	static const char ws[] = " \t\r\n";
	char *cp = line;
	int argc = 0;

	while (*cp) {
	/* skip leading whitespace */
	cp += strspn(cp, ws);

	if (*cp == '\0')
	break;

	if (argc >= (max_args - 1))
	return -1;

	/* word begins with quote */
	if (cp == '\'' \|\| cp == '"') {
	char quote = *cp++;

	argv[argc++] = cp;
	/* find ending quote */
	cp = strchr(cp, quote);
	if (cp == NULL) {
	fprintf(stderr, "Unterminated quoted string\n");
	exit(1);
	}
	} else {
	argv[argc++] = cp;

	/* find end of word */
	cp += strcspn(cp, ws);
	if (*cp == '\0')
	break;
	}

	/* seperate words */
	*cp++ = 0;
	}
	argv[argc] = NULL;

	return argc;
	}

	/* Like glibc getline but handle continuation lines and comments */
	ssize_t getcmdline(char *linep, size_t lenp, FILE *in)
	{
	ssize_t cc;
	char *cp;

	cc = getline(linep, lenp, in);
	if (cc < 0)
	return cc; /* eof or error */

	cp = strchr(*linep, '#');
	if (cp)
	*cp = '\0';

	while ((cp = strstr(*linep, "\\\n")) != NULL) {
	char *line1 = NULL;
	size_t len1 = 0;
	ssize_t cc1;

	cc1 = getline(&line1, &len1, in);
	if (cc1 < 0) {
	fprintf(stderr, "Missing continuation line\n");
	return cc1;
	}

	*cp = 0;

	cp = strchr(line1, '#');
	if (cp)
	*cp = '\0';

	lenp = strlen(linep) + strlen(line1) + 1;
	linep = realloc(linep, *lenp);
	if (!*linep) {
	fprintf(stderr, "Out of memory\n");
	*lenp = 0;
	return -1;
	}
	cc += cc1 - 2;
	strcat(*linep, line1);
	free(line1);
	}
	return cc;
	}

	static int parse_filters(pcap_t handle, FILE file,
	struct tc_filter *filters, size_t num_filters)
	{
	char name, expression;
	size_t i = 0;
	int err;

	while (i < num_filters && fscanf(file, "%ms :: %m[^\n]s\n",
	&name, &expression) != EOF) {
	struct tc_filter *filter = &filters[i];

	filter->name = name;

	err = pcap_compile(handle, &filter->prog, expression,
	1, PCAP_NETMASK_UNKNOWN);
	if (err < 0) {
	pcap_perror(handle, "pcap_compile");
	return -EINVAL;
	}

	i++;
	}

	return i;
	}

	static int str_to_entry_cmd(const char *str)
	{
	if (strcmp(str, "S") == 0)
	return TC_TAPRIO_CMD_SET_GATES;

	if (strcmp(str, "H") == 0)
	return TC_TAPRIO_CMD_SET_AND_HOLD;

	if (strcmp(str, "R") == 0)
	return TC_TAPRIO_CMD_SET_AND_RELEASE;

	return -1;
	}

	int get_u32(uint32_t val, const char arg, int base)
	{
	unsigned long res;
	char *ptr;

	if (!arg \|\| !*arg)
	return -1;
	res = strtoul(arg, &ptr, base);

	/* empty string or trailing non-digits */
	if (!ptr \|\| ptr == arg \|\| *ptr)
	return -1;

	/* overflow */
	if (res == ULONG_MAX && errno == ERANGE)
	return -1;

	/* in case UL > 32 bits */
	if (res > 0xFFFFFFFFUL)
	return -1;

	*val = res;
	return 0;
	}

	int get_s64(int64_t val, const char arg, int base)
	{
	long res;
	char *ptr;

	errno = 0;

	if (!arg \|\| !*arg)
	return -1;
	res = strtoll(arg, &ptr, base);
	if (!ptr \|\| ptr == arg \|\| *ptr)
	return -1;
	if ((res == LLONG_MIN \|\| res == LLONG_MAX) && errno == ERANGE)
	return -1;
	if (res > INT64_MAX \|\| res < INT64_MIN)
	return -1;

	*val = res;
	return 0;
	}

	static int parse_batch_file(FILE file, struct schedule schedule, size_t max_entries)
	{
	int argc;
	char *arguments[MAX_ARGS];
	char **argv;
	size_t len;
	char *line = NULL;
	int err;

	if (getcmdline(&line, &len, file) < 0) {
	fprintf(stderr, "Could not read batch file\n");
	exit(EXIT_FAILURE);
	}

	argc = makeargs(line, arguments, MAX_ARGS);
	if (argc < 0) {
	fprintf(stderr, "Could not parse arguments\n");
	return -1;
	}

	argv = arguments;

	while (argc > 0) {
	if (strcmp(*argv, "sched-entry") == 0) {
	struct sched_entry *e;

	if (schedule->num_entries >= max_entries) {
	fprintf(stderr, "The maximum number of schedule entries is %zu\n", max_entries);
	return -1;
	}

	e = &schedule->entries[schedule->num_entries];

	NEXT_ARG();
	err = str_to_entry_cmd(*argv);
	if (err < 0) {
	fprintf(stderr, "Could not parse command (found %s)\n", *argv);
	return -1;
	}
	e->command = err;

	NEXT_ARG();
	if (get_u32(&e->gatemask, *argv, 16)) {
	fprintf(stderr, "Could not parse gatemask (found %s)\n", *argv);
	return -1;
	}

	NEXT_ARG();
	if (get_u32(&e->interval, *argv, 0)) {
	fprintf(stderr, "Could not parse interval (found %s)\n", *argv);
	return -1;
	}

	schedule->num_entries++;

	} else if (strcmp(*argv, "base-time") == 0) {
	NEXT_ARG();
	if (get_s64(&schedule->base_time, *argv, 10)) {
	fprintf(stderr, "Could not parse base-time (found %s)\n", *argv);
	return -1;
	}
	}
	argc--; argv++;
	}

	return 0;
	}

	/* libpcap re-uses the timeval struct for nanosecond resolution when
	* PCAP_TSTAMP_PRECISION_NANO is specified.
	*/
	static uint64_t tv_to_nanos(const struct timeval *tv)
	{
	return tv->tv_sec * NSEC_TO_SEC + tv->tv_usec;
	}

	static struct sched_entry next_entry(struct schedule schedule)
	{
	schedule->current_entry++;

	if (schedule->current_entry >= schedule->num_entries)
	schedule->current_entry = 0;

	return &schedule->entries[schedule->current_entry];
	}

	static struct sched_entry first_entry(struct schedule schedule)
	{
	schedule->current_entry = 0;

	return &schedule->entries[0];
	}

	static struct sched_entry advance_until(struct schedule schedule,
	uint64_t ts, uint64_t *now)
	{
	struct sched_entry first, entry;
	uint64_t cycle = 0;
	uint64_t n;

	entry = first = first_entry(schedule);

	if (!schedule->cycle_time) {
	do {
	cycle += entry->interval;
	entry = next_entry(schedule);
	} while (entry != first);

	schedule->cycle_time = cycle;
	}

	cycle = schedule->cycle_time;

	n = (ts - schedule->base_time) / cycle;
	now = schedule->base_time + (n cycle);

	do {
	if (*now + entry->interval > ts)
	break;

	*now += entry->interval;
	entry = next_entry(schedule);
	} while (true);

	return entry;
	}

	static int match_packet(const struct tc_filter *filters, int num_filters,
	const struct pcap_pkthdr *hdr,
	const uint8_t *frame)
	{
	int err;
	int i;

	for (i = 0; i < num_filters; i++) {
	const struct tc_filter *f = &filters[i];

	err = pcap_offline_filter(&f->prog, hdr, frame);
	if (!err) {
	/* The filter for traffic class 'i' doesn't
	* match the packet
	*/
	continue;
	}

	return i;
	}

	/* returning 'num_filters' means that the packet matches none
	* of the filters, so it's a Best Effort packet.
	*/
	return num_filters;
	}

	static int classify_frames(pcap_t handle, const struct tc_filter tc_filters,
	int num_filters, struct schedule *schedule)
	{
	struct sched_entry *entry;
	struct pcap_pkthdr *hdr;
	const uint8_t *frame;
	uint64_t now, ts;
	int err;

	now = schedule->base_time;

	/* Ignore frames until we get to the base_time of the
	* schedule. */
	do {
	err = pcap_next_ex(handle, &hdr, &frame);
	if (err < 0) {
	pcap_perror(handle, "pcap_next_ex");
	return -EINVAL;
	}

	ts = tv_to_nanos(&hdr->ts);
	} while (ts <= now);

	do {
	const char name, ontime;
	int64_t offset;
	int tc;

	ts = tv_to_nanos(&hdr->ts);

	entry = advance_until(schedule, ts, &now);

	tc = match_packet(tc_filters, num_filters, hdr, frame);

	if (tc < num_filters)
	name = tc_filters[tc].name;
	else
	name = "BE";

	if (entry->gatemask & (1 << tc))
	ontime = "ontime";
	else
	ontime = "late";

	offset = ts - now;

	/* XXX: what more information might we need? */
	printf("%" PRIu64 " %" PRIu64 " \"%s\" \"%s\" %" PRId64 " %#x\n",
	ts, now, name, ontime, offset, entry->gatemask);
	} while (pcap_next_ex(handle, &hdr, &frame) >= 0);

	return 0;
	}

	static void free_filters(struct tc_filter *filters, int num_filters)
	{
	int i;

	for (i = 0; i < num_filters; i++) {
	struct tc_filter *f = &filters[i];

	free(f->name);
	}
	}

	int main(int argc, char **argv)
	{
	char errbuf[PCAP_ERRBUF_SIZE];
	pcap_t *handle;
	int err, num;

	argp_parse(&argp, argc, argv, 0, NULL, NULL);

	if (!dump_file \|\| !batch_file \|\| !filters_file) {
	usage();
	exit(EXIT_FAILURE);
	}

	err = parse_batch_file(batch_file, &schedule, NUM_ENTRIES);
	if (err < 0) {
	fprintf(stderr, "Could not parse schedule file (or file empty)\n");
	exit(EXIT_FAILURE);
	}

	handle = pcap_fopen_offline_with_tstamp_precision(
	dump_file, PCAP_TSTAMP_PRECISION_NANO, errbuf);
	if (!handle) {
	fprintf(stderr, "Could not parse dump file\n");
	exit(EXIT_FAILURE);
	}

	num = parse_filters(handle, filters_file,
	traffic_filters, NUM_FILTERS);
	if (err < 0) {
	fprintf(stderr, "Could not filters file\n");
	exit(EXIT_FAILURE);
	}

	err = classify_frames(handle, traffic_filters, num, &schedule);
	if (err < 0) {
	fprintf(stderr, "Could not classify frames\n");
	exit(EXIT_FAILURE);
	}

	free_filters(traffic_filters, num);

	pcap_close(handle);

	return 0;
	}
	/*
	* This program demonstrates transmission of L2 frames using the
	* system TAI timer.
	*
	* Copyright (c) 2018, Intel Corporation
	*
	* Copyright (C) 2017 linutronix GmbH
	*
	* Large portions taken from the linuxptp stack.
	* Copyright (C) 2011, 2012 Richard Cochran <richardcochran@gmail.com>
	*
	* Some portions taken from the sgd test program.
	* Copyright (C) 2015 linutronix GmbH
	*
	* This program is free software; you can redistribute it and/or modify
	* it under the terms of the GNU General Public License as published by
	* the Free Software Foundation; either version 2 of the License, or
	* (at your option) any later version.
	*
	* This program is distributed in the hope that it will be useful,
	* but WITHOUT ANY WARRANTY; without even the implied warranty of
	* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
	* GNU General Public License for more details.
	*
	* You should have received a copy of the GNU General Public License along
	* with this program; if not, write to the Free Software Foundation, Inc.,
	* 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
	*/
	#define _GNU_SOURCE /for CPU_SET/
	#include <errno.h>
	#include <ifaddrs.h>
	#include <linux/errqueue.h>
	#include <linux/if_ether.h>
	#include <linux/if_packet.h>
	#include <net/if.h>
	#include <netinet/in.h>
	#include <poll.h>
	#include <pthread.h>
	#include <stdio.h>
	#include <stdlib.h>
	#include <string.h>
	#include <sys/ioctl.h>
	#include <unistd.h>

	#define ONE_SEC 1000000000ULL
	#define DEFAULT_PERIOD 1000000
	#define DEFAULT_DELAY 500000
	#define DEFAULT_PRIORITY 3
	#define MARKER 'a'

	#ifndef SO_TXTIME
	#define SO_TXTIME 61
	#define SCM_TXTIME SO_TXTIME
	#endif

	#ifndef SO_EE_ORIGIN_TXTIME
	#define SO_EE_ORIGIN_TXTIME 6
	#define SO_EE_CODE_TXTIME_INVALID_PARAM 1
	#define SO_EE_CODE_TXTIME_MISSED 2
	#endif

	#define pr_err(s) fprintf(stderr, s "\n")
	#define pr_info(s) fprintf(stdout, s "\n")

	/* The API for SO_TXTIME is the below struct and enum, which will be
	* provided by uapi/linux/net_tstamp.h in the near future.
	*/
	struct sock_txtime {
	clockid_t clockid;
	uint16_t flags;
	};

	enum txtime_flags {
	SOF_TXTIME_DEADLINE_MODE = (1 << 0),
	SOF_TXTIME_REPORT_ERRORS = (1 << 1),

	SOF_TXTIME_FLAGS_LAST = SOF_TXTIME_REPORT_ERRORS,
	SOF_TXTIME_FLAGS_MASK = (SOF_TXTIME_FLAGS_LAST - 1) \|
	SOF_TXTIME_FLAGS_LAST
	};


	static int running = 1, use_so_txtime = 1;
	static int period_nsec = DEFAULT_PERIOD;
	static int waketx_delay = DEFAULT_DELAY;
	static int so_priority = DEFAULT_PRIORITY;
	static int use_deadline_mode = 0;
	static int receive_errors = 0;
	static uint64_t base_time = 0;
	static uint8_t mac_addr[ETH_ALEN] = {0};
	static struct sock_txtime sk_txtime;
	static struct sockaddr_ll addr = {0};

	static void normalize(struct timespec *ts)
	{
	while (ts->tv_nsec > 999999999) {
	ts->tv_sec += 1;
	ts->tv_nsec -= ONE_SEC;
	}

	while (ts->tv_nsec < 0) {
	ts->tv_sec -= 1;
	ts->tv_nsec += ONE_SEC;
	}
	}

	static int sk_interface_index(int fd, const char *name)
	{
	struct ifreq ifreq;
	int err;

	memset(&ifreq, 0, sizeof(ifreq));
	strncpy(ifreq.ifr_name, name, sizeof(ifreq.ifr_name) - 1);
	err = ioctl(fd, SIOCGIFINDEX, &ifreq);
	if (err < 0) {
	pr_err("ioctl SIOCGIFINDEX failed: %m");
	return err;
	}
	return ifreq.ifr_ifindex;
	}

	static int l2_open_socket(const char *name, clockid_t clkid)
	{
	int fd, index, on = 1;
	addr.sll_family = AF_PACKET,
	addr.sll_protocol = htons(ETH_P_TSN),
	addr.sll_halen = ETH_ALEN,

	fd = socket(AF_PACKET, SOCK_DGRAM, htons(ETH_P_TSN));
	if (fd < 0) {
	pr_err("socket failed: %m");
	goto no_socket;
	}

	index = sk_interface_index(fd, name);
	if (index < 0)
	goto no_option;

	addr.sll_ifindex = index;

	if (setsockopt(fd, SOL_SOCKET, SO_PRIORITY, &so_priority, sizeof(so_priority))) {
	pr_err("Couldn't set priority");
	goto no_option;
	}

	memcpy(&addr.sll_addr, mac_addr, ETH_ALEN);

	sk_txtime.clockid = clkid;
	sk_txtime.flags = (use_deadline_mode \| receive_errors);
	if (use_so_txtime && setsockopt(fd, SOL_SOCKET, SO_TXTIME, &sk_txtime, sizeof(sk_txtime))) {
	pr_err("setsockopt SO_TXTIME failed: %m");
	goto no_option;
	}

	return fd;
	no_option:
	close(fd);
	no_socket:
	return -1;
	}

	static int l2_send(int fd, void *buf, int len, __u64 txtime)
	{
	char control[CMSG_SPACE(sizeof(txtime))] = {};
	struct cmsghdr *cmsg;
	struct msghdr msg;
	struct iovec iov;
	ssize_t cnt;

	iov.iov_base = buf;
	iov.iov_len = len;

	memset(&msg, 0, sizeof(msg));
	msg.msg_name = &addr;
	msg.msg_namelen = sizeof(addr);
	msg.msg_iov = &iov;
	msg.msg_iovlen = 1;

	/*
	* We specify the transmission time in the CMSG.
	*/
	if (use_so_txtime) {
	msg.msg_control = control;
	msg.msg_controllen = sizeof(control);

	cmsg = CMSG_FIRSTHDR(&msg);
	cmsg->cmsg_level = SOL_SOCKET;
	cmsg->cmsg_type = SCM_TXTIME;
	cmsg->cmsg_len = CMSG_LEN(sizeof(__u64));
	((__u64 ) CMSG_DATA(cmsg)) = txtime;
	}

	cnt = sendmsg(fd, &msg, 0);
	if (cnt < 1) {
	pr_err("sendmsg failed: %m");
	return cnt;
	}

	return cnt;
	}

	static unsigned char tx_buffer[256];

	static int process_socket_error_queue(int fd)
	{
	uint8_t msg_control[CMSG_SPACE(sizeof(struct sock_extended_err))];
	unsigned char err_buffer[sizeof(tx_buffer)];
	struct sock_extended_err *serr;
	struct cmsghdr *cmsg;
	__u64 tstamp = 0;

	struct iovec iov = {
	.iov_base = err_buffer,
	.iov_len = sizeof(err_buffer)
	};
	struct msghdr msg = {
	.msg_iov = &iov,
	.msg_iovlen = 1,
	.msg_control = msg_control,
	.msg_controllen = sizeof(msg_control)
	};

	if (recvmsg(fd, &msg, MSG_ERRQUEUE) == -1) {
	pr_err("recvmsg failed");
	return -1;
	}

	cmsg = CMSG_FIRSTHDR(&msg);
	while (cmsg != NULL) {
	serr = (void *) CMSG_DATA(cmsg);
	if (serr->ee_origin == SO_EE_ORIGIN_TXTIME) {
	tstamp = ((__u64) serr->ee_data << 32) + serr->ee_info;

	switch(serr->ee_code) {
	case SO_EE_CODE_TXTIME_INVALID_PARAM:
	fprintf(stderr, "packet with tstamp %llu dropped due to invalid params\n", tstamp);
	return 0;
	case SO_EE_CODE_TXTIME_MISSED:
	fprintf(stderr, "packet with tstamp %llu dropped due to missed deadline\n", tstamp);
	return 0;
	default:
	return -1;
	}
	}

	cmsg = CMSG_NXTHDR(&msg, cmsg);
	}

	return 0;
	}

	static int run_nanosleep(clockid_t clkid, int fd)
	{
	struct timespec ts;
	int cnt, err;
	__u64 txtime;
	struct pollfd p_fd = {
	.fd = fd,
	};

	memset(tx_buffer, MARKER, sizeof(tx_buffer));

	/* If no base-time was specified, start one to two seconds in the
	* future.
	*/
	if (base_time == 0) {
	clock_gettime(clkid, &ts);
	ts.tv_sec += 1;
	ts.tv_nsec = ONE_SEC - waketx_delay;
	} else {
	ts.tv_sec = base_time / ONE_SEC;
	ts.tv_nsec = (base_time % ONE_SEC) - waketx_delay;
	}

	normalize(&ts);

	txtime = ts.tv_sec * ONE_SEC + ts.tv_nsec;
	txtime += waketx_delay;

	fprintf(stderr, "\ntxtime of 1st packet is: %llu", txtime);

	while (running) {
	memcpy(tx_buffer, &txtime, sizeof(__u64));
	err = clock_nanosleep(clkid, TIMER_ABSTIME, &ts, NULL);
	switch (err) {
	case 0:
	cnt = l2_send(fd, tx_buffer, sizeof(tx_buffer), txtime);
	if (cnt != sizeof(tx_buffer)) {
	pr_err("send failed");
	}
	ts.tv_nsec += period_nsec;
	normalize(&ts);
	txtime += period_nsec;

	/* Check if errors are pending on the error queue. */
	err = poll(&p_fd, 1, 0);
	if (err == 1 && p_fd.revents & POLLERR) {
	if (!process_socket_error_queue(fd))
	return -ECANCELED;
	}

	break;
	case EINTR:
	continue;
	default:
	fprintf(stderr, "clock_nanosleep returned %d: %s",
	err, strerror(err));
	return err;
	}
	}

	return 0;
	}

	static int set_realtime(pthread_t thread, int priority, int cpu)
	{
	cpu_set_t cpuset;
	struct sched_param sp;
	int err, policy;

	int min = sched_get_priority_min(SCHED_FIFO);
	int max = sched_get_priority_max(SCHED_FIFO);

	fprintf(stderr, "min %d max %d\n", min, max);

	if (priority < 0) {
	return 0;
	}

	err = pthread_getschedparam(thread, &policy, &sp);
	if (err) {
	fprintf(stderr, "pthread_getschedparam: %s\n", strerror(err));
	return -1;
	}

	sp.sched_priority = priority;

	err = pthread_setschedparam(thread, SCHED_FIFO, &sp);
	if (err) {
	fprintf(stderr, "pthread_setschedparam: %s\n", strerror(err));
	return -1;
	}

	if (cpu < 0) {
	return 0;
	}
	CPU_ZERO(&cpuset);
	CPU_SET(cpu, &cpuset);
	err = pthread_setaffinity_np(thread, sizeof(cpu_set_t), &cpuset);
	if (err) {
	fprintf(stderr, "pthread_setaffinity_np: %s\n", strerror(err));
	return -1;
	}

	return 0;
	}

	static void usage(char *progname)
	{
	fprintf(stderr,
	"\n"
	"usage: %s [options]\n"
	"\n"
	" -c [num] run on CPU 'num'\n"
	" -d [num] delta from wake up to txtime in nanoseconds (default %d)\n"
	" -h prints this message and exits\n"
	" -i [name] use network interface 'name'\n"
	" -p [num] run with RT priorty 'num'\n"
	" -P [num] period in nanoseconds (default %d)\n"
	" -s do not use SO_TXTIME\n"
	" -t [num] set SO_PRIORITY to 'num' (default %d)\n"
	" -D set deadline mode for SO_TXTIME\n"
	" -E enable error reporting on the socket error queue for SO_TXTIME\n"
	" -b [tstamp] txtime of 1st packet as a 64bit [tstamp]. Default: now + ~2seconds\n"
	" -m [mac_addr] dst MAC address\n"
	"\n",
	progname, DEFAULT_DELAY, DEFAULT_PERIOD, DEFAULT_PRIORITY);
	}

	int main(int argc, char *argv[])
	{
	int c, cpu = -1, err, fd, priority = -1;
	clockid_t clkid = CLOCK_TAI;
	char iface = NULL, progname;

	/* Process the command line arguments. */
	progname = strrchr(argv[0], '/');
	progname = progname ? 1 + progname : argv[0];
	while (EOF != (c = getopt(argc, argv, "c:d:hi:p:P:st:DEb:m:"))) {
	switch (c) {
	case 'c':
	cpu = atoi(optarg);
	break;
	case 'd':
	waketx_delay = atoi(optarg);
	break;
	case 'h':
	usage(progname);
	return 0;
	case 'i':
	iface = optarg;
	break;
	case 'p':
	priority = atoi(optarg);
	break;
	case 'P':
	period_nsec = atoi(optarg);
	break;
	case 's':
	use_so_txtime = 0;
	break;
	case 't':
	so_priority = atoi(optarg);
	break;
	case 'D':
	use_deadline_mode = SOF_TXTIME_DEADLINE_MODE;
	break;
	case 'E':
	receive_errors = SOF_TXTIME_REPORT_ERRORS;
	break;
	case 'b':
	base_time = atoll(optarg);
	break;
	case 'm':
	err = sscanf(optarg, "%hhx:%hhx:%hhx:%hhx:%hhx:%hhx",
	&mac_addr[0], &mac_addr[1], &mac_addr[2],
	&mac_addr[3], &mac_addr[4], &mac_addr[5]);
	if (err != 6) {
	printf("Invalid MAC address\n");
	return -1;
	}

	break;
	case '?':
	usage(progname);
	return -1;
	}
	}

	if (mac_addr[0] == 0 && mac_addr[1] == 0 && mac_addr[2] == 0) {
	pr_err("Destination MAC Address must be specified.");
	usage(progname);
	return -1;
	}

	if (waketx_delay > 999999999 \|\| waketx_delay < 0) {
	pr_err("Bad wake up to transmission delay.");
	usage(progname);
	return -1;
	}

	if (period_nsec < 1000) {
	pr_err("Bad period.");
	usage(progname);
	return -1;
	}

	if (!iface) {
	pr_err("Need a network interface.");
	usage(progname);
	return -1;
	}

	if (set_realtime(pthread_self(), priority, cpu)) {
	return -1;
	}

	fd = l2_open_socket(iface, clkid);
	if (fd < 0) {
	return -1;
	}

	err = run_nanosleep(clkid, fd);

	close(fd);
	return err;
	}
	PCAP_CFLAGS=$(shell pcap-config --cflags --libs)

	all: dump-classifier udp_tai

	dump-classifier: dump-classifier.c
	${CC} ${CFLAGS} $(PCAP_CFLAGS) -o $@ $<

	udp_tai: udp_tai.c
	${CC} ${CFLAGS} -lpthread -o $@ $<

	clean:
	@rm dump-classifier
	@rm udp_tai

	.PHONY: clean debug
	#!/bin/sh
	#
	# Copyright (c) 2018, Intel Corporation
	#
	# SPDX-License-Identifier: BSD-3-Clause
	#

	IFACE=$1

	if [ -z $IFACE ]; then
	echo "You must provide the network interface as first argument"
	exit -1
	fi

	# Now plus 1 minute
	PLUS_1MIN=$((`date +%s%N` + 37000000000 + (60 * 1000000000)))

	# Base will the next "round" timestamp ~1 min from now, plus 250us
	BASE=$(($PLUS_1MIN - ( $PLUS_1MIN % 1000000000 ) + 250000))

	sudo ./udp_tai -i $IFACE -b $BASE -P 1000000 -t 3 -p 90 -d 600000 -u 7788