Switching network configurations on a TP-Link TL-MR3020 with OpenWrt (12.09 Attitude Adjustment) using the sliding switch. Based on the sample scripts at: https://forum.openwrt.org/viewtopic.php?pid=172111#p172111 and https://forum.openwrt.org/viewtopic.php?pid=172110#p172110

00-button

# based on
# https://dev.openwrt.org/browser/trunk/target/linux/atheros/base-files/etc/hotplug.d/button/00-button
# https://forum.openwrt.org/viewtopic.php?pid=172110#p172110

. /lib/functions.sh

export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin

do_button () {
	local button
	local action
	local handler
	local min
	local max

	config_get button $1 button
	config_get action $1 action
	config_get handler $1 handler
	config_get min $1 min
	config_get max $1 max

	if [ "$button" = "3g" -o "$button" = "wisp" -o "$button" = "ap" ] ; then
		if [ "$ACTION" = "released" ] ; then
			if [ "$BUTTON" = "BTN_1" ] ; then
				export BUTTON=3g
				export ACTION=pressed
			elif [ "$BUTTON" = "BTN_0" ] ; then
				export BUTTON=wisp
				export ACTION=pressed
			fi
		elif [ "$BUTTON" = "BTN_0" -o "$BUTTON" = "BTN_1" ] ; then
			if BTN_0_pressed && BTN_1_pressed ; then
				export BUTTON=ap
			fi
		fi
	fi

	[ "$ACTION" = "$action" -a "$BUTTON" = "$button" -a -n "$handler" ] && {
		[ -z "$min" -o -z "$max" ] && eval $handler 
		[ -n "$min" -a -n "$max" ] && {
			[ $min -le $SEEN -a $max -ge $SEEN ] && eval $handler 
		}
	}
}

config_load system
config_foreach do_button button

BTN_0_pressed

#!/bin/sh
grep -qe "sw1.*in  hi" /sys/kernel/debug/gpio

BTN_1_pressed

#!/bin/sh
grep -qe "sw2.*in  hi" /sys/kernel/debug/gpio

network_config

#!/bin/sh /etc/rc.common

START=15
boot() {
	/usr/local/sbin/set_network_config
}

set_network_config

#!/bin/sh

# based on https://forum.openwrt.org/viewtopic.php?pid=172111#p172111

ME=$(basename $0)
export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin

if BTN_1_pressed ; then
	if BTN_0_pressed ; then
		CONFIG=ap
	else
		CONFIG=wisp
	fi
else
	CONFIG=3g
fi

SRC="/etc/config/$CONFIG"
DEST=/tmp/network_config

if [ ! -d "$SRC" ] ; then
	logger -t "$ME" -p "user.warn" "$SRC is not a directory"
	exit 1
fi

if [ -L "$DEST" ] ; then
	CUR=$(cd "$DEST"; pwd -P)
	if [ "$CUR" = "$SRC" ] ; then
		logger -t "$ME" "Already using $CONFIG config"
		exit 2
	fi
fi

logger -t "$ME" "Using $CONFIG config"
ln -sfn "$SRC" "$DEST"

setup

chmod a+x BTN_0_pressed BTN_1_pressed set_network_config update_network_config network_config
mkdir -p /usr/local/sbin
mv BTN_0_pressed BTN_1_pressed set_network_config update_network_config /usr/local/sbin
mkdir -p /etc/hotplug.d/button
mv 00-button /etc/hotplug.d/button
mv network_config /etc/init.d

opkg update
opkg install flock

cd /etc/config
mkdir 3g
mv network wireless 3g
cp -r 3g wisp
cp -r 3g ap
ln -s network /tmp/network_config/network
ln -s wireless /tmp/network_config/wireless
# configure files in 3g / wisp / ap directories for each corresponding mode
# to use uci / luci to configure, create the /tmp/network_config symbolic link to point to the correct directory, e.g.
#     ln -s /tmp/network_config /etc/config/3g
# or configure the settings before moving the config files

/etc/init.d/network_config enable

uci add system button
uci set system.@button[-1].button=3g
uci set system.@button[-1].action=pressed
uci set system.@button[-1].handler=update_network_config
uci add system button
uci set system.@button[-1].button=wisp
uci set system.@button[-1].action=pressed
uci set system.@button[-1].handler=update_network_config
uci add system button
uci set system.@button[-1].button=ap
uci set system.@button[-1].action=pressed
uci set system.@button[-1].handler=update_network_config
uci commit system

reboot

update_network_config

#!/bin/sh

ME=$(basename $0)
export PATH=/bin:/sbin:/usr/bin:/usr/sbin:/usr/local/bin:/usr/local/sbin

(
	flock -n 9 || exit 1

	(
		sleep 1

		if set_network_config ; then
			. /etc/diag.sh
			get_status_led
			status_led_set_timer 200 200

			logger -t "$ME" "Reloading network"
			/etc/init.d/network restart

			status_led_on
		fi
	) 9>&-

) 9>/tmp/update_network_config.lock

Hello,

I find this approach a bit too complex compared to the scripts explained here:
http://www.linux-magazine.com/Online/Features/The-One-Watt-Server

Could you let me know any disadvantage of the one I linked?
Regards

Somehow i cannot get this setup to detect "ap" pressed.. Any hints ? i just used your scripts, except that in /etc/config/system , i just log the actions , i will define other handlers as needed . Like so :

config button
option button '3g'
option action 'pressed'
option handler 'logger 3g selected'

config button
option button 'wisp'
option action 'pressed'
option handler 'logger Wisp selected'

config button
option button 'ap'
option action 'pressed'
option handler 'logger AP selected'

Thanks !!

Hello
I clicked the mjpg-streamer on my tl-MR3020 with the C270 camera image is tremento and after a few minutes out of the screen someone has gone through this problem
Here is the video with the defect
https://www.youtube.com/watch?v=LXSlWS_zwsA
Thank you all

Not sure if folks are still using these scripts, but I wrote a package that makes detecting slide switch changes easier: slide-switch