Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
qca8k Serial Log
[ 865.518470] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 865.518656] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 865.524951] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 865.532094] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 865.539347] ath10k_pci 0000:01:00.0: SWBA overrun on vdev 0, skipped old beacon
[ 865.553953] ath10k_ahb a000000.wifi: SWBA overrun on vdev 0, skipped old beacon
[ 865.566878] ath10k_ahb a800000.wifi: SWBA overrun on vdev 0, skipped old beacon
[ 865.567059] ath10k_ahb a800000.wifi: SWBA overrun on vdev 0, skipped old beacon
[ 865.573229] ath10k_ahb a800000.wifi: SWBA overrun on vdev 0, skipped old beacon
[ 865.580443] ath10k_ahb a800000.wifi: SWBA overrun on vdev 0, skipped old beacon
[ 865.587757] ath10k_ahb a800000.wifi: SWBA overrun on vdev 0, skipped old beacon
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r9683+2-b982a66699
-----------------------------------------------------
#
# OpenWrt-2019-03-18_2146-0700-ipq40xx-generic
#
rootfs: mtd11
boot_part=1
boot_count=0
71 bootcount entries. Last ten: 01 00 01 00 01 00 01 00 01 00
root@OpenWrt:/# sysupgrade /tmp/OpenWrt-2019-03-18_2204-0700-ipq40xx-linksys_ea8
300-squashfs-sysupgrade.bin
Saving config files...
Commencing upgrade. Closing all shell sessions.
Watchdog handover: fd=3
- watchdog -
killall: telnetd: no process killed
Sending TERM to remaining processes ... logd logread dnsmasq netifd odhcpd ntpd hostapd hostapd hostapd ubusd
[ 896.181189] device wlan2 left promiscuous mode
[ 896.181383] br-lan: port 6(wlan2) entered disabled state
[ 896.225318] device wlan1 left promiscuous mode
[ 896.226652] br-lan: port 5(wlan1) entered disabled state
[ 896.286030] device wlan0 left promiscuous mode
[ 896.286200] br-lan: port 7(wlan0) entered disabled state
[ 896.335333] ath10k_ahb a800000.wifi: peer-unmap-event: unknown peer id 0
[ 896.335381] ath10k_ahb a800000.wifi: peer-unmap-event: unknown peer id 0
[ 896.352394] ath10k_ahb a000000.wifi: peer-unmap-event: unknown peer id 0
[ 896.352435] ath10k_ahb a000000.wifi: peer-unmap-event: unknown peer id 0
[ 896.382061] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
[ 896.382111] ath10k_pci 0000:01:00.0: peer-unmap-event: unknown peer id 0
Sending KILL to remaining processes ... logread
Switching to ramdisk...
[ 902.738698] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 902.839305] UBIFS (ubi0:1): un-mount UBI device 0
Performing system upgrade...
[ 903.290591] ubi1: attaching mtd13
[ 903.940840] ubi1: scanning is finished
[ 903.952621] ubi1: attached mtd13 (name "alt_rootfs", size 85 MiB)
[ 903.952653] ubi1: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 903.957694] ubi1: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 903.964486] ubi1: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 903.971349] ubi1: good PEBs: 680, bad PEBs: 0, corrupted PEBs: 0
[ 903.978094] ubi1: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 903.984356] ubi1: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 2015820243
[ 903.991390] ubi1: available PEBs: 0, total reserved PEBs: 680, PEBs reserved for bad PEB handling: 40
[ 904.000685] ubi1: background thread "ubi_bgt1d" started, PID 3139
UBI device number 1, total 680 LEBs (86343680 bytes, 82.3 MiB), available 0 LEBs (0 bytes), LEB size 126976 bytes (124.0 KiB)
Unlocking alt_kernel ...
Writing from <stdin> to alt_kernel ...
Volume ID 0, size 75 LEBs (9523200 bytes, 9.0 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs", alignment 1
Set volume size to 71233536
Volume ID 1, size 561 LEBs (71233536 bytes, 67.9 MiB), LEB size 126976 bytes (124.0 KiB), dynamic, name "rootfs_data", alignment 1
[ 909.691747] UBIFS (ubi1:1): default file-system created
[ 909.692637] UBIFS (ubi1:1): background thread "ubifs_bgt1_1" started, PID 3243
[ 909.768620] UBIFS (ubi1:1): UBIFS: mounted UBI device 1, volume 1, name "rootfs_data"
[ 909.768667] UBIFS (ubi1:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 909.775529] UBIFS (ubi1:1): FS size: 69963776 bytes (66 MiB, 551 LEBs), journal size 3555328 bytes (3 MiB, 28 LEBs)
[ 909.785369] UBIFS (ubi1:1): reserved for root: 3304561 bytes (3227 KiB)
[ 909.795604] UBIFS (ubi1:1): media format: w4/r0 (latest is w5/r0), UUID 1B16CD29-E0E7-4C8A-B116-F6EE7797EFEF, small LPT model
[ 909.863734] UBIFS (ubi1:1): un-mount UBI device 1
[ 909.863801] UBIFS (ubi1:1): background thread "ubifs_bgt1_1" stops
sysupgrade successful
umount: can't unmount /dev: Resource busy
umount: can't unmount /tmp: Resource busy
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00108
S - IMAGE_VARIANT_STRING=DAACANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000025
S - Reset status Config, 0x00000010
S - Core 0 Frequency, 0 MHz
B - 261 - PBL, Start
B - 1339 - bootable_media_detect_entry, Start
B - 2608 - bootable_media_detect_success, Start
B - 2622 - elf_loader_entry, Start
B - 4028 - auth_hash_seg_entry, Start
B - 6177 - auth_hash_seg_exit, Start
B - 74189 - elf_segs_hash_verify_entry, Start
B - 195977 - PBL, End
B - 196001 - SBL1, Start
B - 288016 - pm_device_init, Start
D - 7 - pm_device_init, Delta
B - 289507 - boot_flash_init, Start
D - 87190 - boot_flash_init, Delta
B - 381000 - boot_config_data_table_init, Start
D - 13976 - boot_config_data_table_init, Delta - (419 Bytes)
B - 397727 - clock_init, Start
D - 7576 - clock_init, Delta
B - 408736 - CDT version:2,Platform ID:8,Major ID:1,Minor ID:0,Subtype:6
B - 412149 - sbl1_ddr_set_params, Start
B - 417243 - cpr_init, Start
D - 2 - cpr_init, Delta
B - 421625 - Pre_DDR_clock_init, Start
D - 4 - Pre_DDR_clock_init, Delta
D - 13170 - sbl1_ddr_set_params, Delta
B - 434929 - pm_driver_init, Start
D - 2 - pm_driver_init, Delta
B - 504688 - sbl1_wait_for_ddr_training, Start
D - 28 - sbl1_wait_for_ddr_training, Delta
B - 520015 - Image Load, Start
D - 143834 - QSEE Image Loaded, Delta - (269176 Bytes)
B - 664274 - Image Load, Start
D - 2117 - SEC Image Loaded, Delta - (2048 Bytes)
B - 674411 - Image Load, Start
D - 187087 - APPSBL Image Loaded, Delta - (444263 Bytes)
B - 861893 - QSEE Execution, Start
D - 56 - QSEE Execution, Delta
B - 868090 - SBL1, End
D - 674198 - SBL1, Delta
S - Flash Throughput, 2088 KB/s (715906 Bytes, 342758 us)
S - DDR Frequency, 672 MHz
U-Boot 2012.07 [Chaos Calmer 15.05.1,r35193] (Nov 02 2017 - 16:33:09)
CBT U-Boot ver: 1.2.9
smem ram ptable found: ver: 1 len: 3
DRAM: 256 MiB
machid : 0x8010006
NAND: ID = 9590daef
Vendor = ef
Device = da
ONFI device found
SF NAND unsupported id:ff:ff:ff:ffSF: Unsupported manufacturer ff
ipq_spi: SPI Flash not found (bus/cs/speed/mode) = (0/0/48000000/0)
256 MiB
MMC: qca_mmc: 0
PCI0 Link Intialized
In: serial
Out: serial
Err: serial
machid: 8010006
flash_type: 2
Net: MAC0 addr:0:3:7f:ba:db:ad
PHY ID1: 0x4d
PHY ID2: 0xd0b1
ipq40xx_ess_sw_init done
eth0
Updating boot_count ... done
Hit any key to stop autoboot: 0
Memory test start, banksize=0x2000000, data size=0x8000, test count per bank=64
Memory test end, lapsed time = 3 seconds
The test result is success
altkern=5f80000
auto_recovery=yes
baudrate=115200
boot_count=0
boot_part=2
boot_part_ready=3
boot_ver=1.2.9
bootcmd=printenv ; run orig_bootcmd
bootdelay=2
bootpart1=set bootargs $partbootargs && nand read $loadaddr $prikern $kernsize && bootm $loadaddr
bootpart2=set bootargs $partbootargs2 && nand read $loadaddr $altkern $kernsize && bootm $loadaddr
ethact=eth0
ethaddr=00:03:7f:ba:db:ad
flash_type=2
flashimg=tftp $loadaddr $image && nand erase $prikern $imgsize && nand write $loadaddr $prikern $filesize
flashimg2=tftp $loadaddr $image && nand erase $altkern $imgsize && nand write $loadaddr $altkern $filesize
image=factory.bin
imgsize=5800000
ipaddr=192.168.1.1
kernsize=300000
loadaddr=84000000
machid=8010006
netmask=255.255.255.0
oemboot=set bootargs $oembootargs && nand read $loadaddr $prikern $kernsize && bootm $loadaddr
oembootargs=init=/sbin/init rootfstype=ubifs ubi.mtd=11,2048 root=ubi0:ubifs rootwait rw
orig_bootcmd=if test $auto_recovery = no; then bootipq; elif test $boot_part = 1; then run bootpart1; else run bootpart2; fi
partbootargs=init=/sbin/init rootfstype=ubifs ubi.mtd=11,2048 root=ubi0:ubifs rootwait rw
partbootargs2=init=/sbin/init rootfstype=ubifs ubi.mtd=13,2048 root=ubi0:ubifs rootwait rw
prikern=780000
serverip=192.168.1.254
stderr=serial
stdin=serial
stdout=serial
Environment size: 1377/262140 bytes
NAND read: device 0 offset 0x5f80000, size 0x300000
3145728 bytes read: OK
## Booting kernel from FIT Image at 84000000 ...
Using 'config@1' configuration
Trying 'kernel@1' kernel subimage
Description: ARM OpenWrt Linux-4.19.25
Type: Kernel Image
Compression: uncompressed
Data Start: 0x840000e4
Data Size: 2224320 Bytes = 2.1 MiB
Architecture: ARM
OS: Linux
Load Address: 0x80208000
Entry Point: 0x80208000
Hash algo: crc32
Hash value: 01a973ca
Hash algo: sha1
Hash value: f0319acc7b65cc0cd17b764fdb168278c1c343d4
Verifying Hash Integrity ... crc32+ sha1+ OK
## Flattened Device Tree from FIT Image at 84000000
Using 'config@1' configuration
Trying 'fdt@1' FDT blob subimage
Description: ARM OpenWrt linksys_ea8300 device tree blob
Type: Flat Device Tree
Compression: uncompressed
Data Start: 0x8421f2dc
Data Size: 19158 Bytes = 18.7 KiB
Architecture: ARM
Hash algo: crc32
Hash value: 36dab0c4
Hash algo: sha1
Hash value: 67499c422e47d0390fdb1f389c7fddadc1caccd8
Verifying Hash Integrity ... crc32+ sha1+ OK
Booting using the fdt blob at 0x8421f2dc
Loading Kernel Image ... OK
OK
Loading Device Tree to 871e7000, end 871eead5 ... OK
Device nand2 not found!
eth0 MAC Address from ART is not valid
eth1 MAC Address from ART is not valid
Using machid 0x8010006 from environment
Starting kernel ...
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Linux version 4.19.25 (jeff@deb-devel) (gcc version 7.4.0 (OpenWrt GCC 7.4.0 r9572+46-b04c9a1ffc)) #0 SMP Tue Mar 19 03:06:32 2019
[ 0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[ 0.000000] CPU: div instructions available: patching division code
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[ 0.000000] OF: fdt: Machine model: Linksys EA8300 (Dallas)
[ 0.000000] Memory policy: Data cache writealloc
[ 0.000000] random: get_random_bytes called from start_kernel+0x78/0x414 with crng_init=0
[ 0.000000] percpu: Embedded 15 pages/cpu @(ptrval) s29772 r8192 d23476 u61440
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 64512
[ 0.000000] Kernel command line: init=/sbin/init rootfstype=ubifs ubi.mtd=13,2048 root=ubi0:ubifs rootwait rw root=/dev/ubiblock0_0 rootfstype=squashfs ro clk_ignore_unused
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 249952K/260096K available (4467K kernel code, 144K rwdata, 1248K rodata, 1024K init, 227K bss, 10144K reserved, 0K cma-reserved, 0K highmem)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB)
[ 0.000000] fixmap : 0xffc00000 - 0xfff00000 (3072 kB)
[ 0.000000] vmalloc : 0xd0800000 - 0xff800000 ( 752 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB)
[ 0.000000] pkmap : 0xbfe00000 - 0xc0000000 ( 2 MB)
[ 0.000000] modules : 0xbf000000 - 0xbfe00000 ( 14 MB)
[ 0.000000] .text : 0x(ptrval) - 0x(ptrval) (5460 kB)
[ 0.000000] .init : 0x(ptrval) - 0x(ptrval) (1024 kB)
[ 0.000000] .data : 0x(ptrval) - 0x(ptrval) ( 144 kB)
[ 0.000000] .bss : 0x(ptrval) - 0x(ptrval) ( 228 kB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
[ 0.000000] rcu: Hierarchical RCU implementation.
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[ 0.000000] arch_timer: cp15 timer(s) running at 48.00MHz (virt).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0xb11fd3bfb, max_idle_ns: 440795203732 ns
[ 0.000007] sched_clock: 56 bits at 48MHz, resolution 20ns, wraps every 4398046511096ns
[ 0.000021] Switching to timer-based delay loop, resolution 20ns
[ 0.000271] Calibrating delay loop (skipped), value calculated using timer frequency.. 96.00 BogoMIPS (lpj=480000)
[ 0.000289] pid_max: default: 32768 minimum: 301
[ 0.000448] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000464] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.001011] CPU: Testing write buffer coherency: ok
[ 0.001854] Setting up static identity map for 0x80300000 - 0x80300060
[ 0.002004] rcu: Hierarchical SRCU implementation.
[ 0.002654] smp: Bringing up secondary CPUs ...
[ 0.005349] smp: Brought up 1 node, 4 CPUs
[ 0.005368] SMP: Total of 4 processors activated (384.00 BogoMIPS).
[ 0.005376] CPU: All CPU(s) started in SVC mode.
[ 0.010078] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[ 0.010218] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[ 0.010241] futex hash table entries: 1024 (order: 4, 65536 bytes)
[ 0.010432] pinctrl core: initialized pinctrl subsystem
[ 0.011345] NET: Registered protocol family 16
[ 0.011706] DMA: preallocated 256 KiB pool for atomic coherent allocations
[ 0.012822] cpuidle: using governor ladder
[ 0.012864] cpuidle: using governor menu
[ 0.033113] usbcore: registered new interface driver usbfs
[ 0.033177] usbcore: registered new interface driver hub
[ 0.033264] usbcore: registered new device driver usb
[ 0.033323] pps_core: LinuxPPS API ver. 1 registered
[ 0.033333] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[ 0.033358] PTP clock support registered
[ 0.034721] clocksource: Switched to clocksource arch_sys_counter
[ 0.035554] NET: Registered protocol family 2
[ 0.036173] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes)
[ 0.036208] TCP established hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.036245] TCP bind hash table entries: 2048 (order: 2, 16384 bytes)
[ 0.036295] TCP: Hash tables configured (established 2048 bind 2048)
[ 0.036400] UDP hash table entries: 256 (order: 1, 8192 bytes)
[ 0.036437] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes)
[ 0.036633] NET: Registered protocol family 1
[ 0.037736] No memory allocated for crashlog
[ 0.037946] workingset: timestamp_bits=30 max_order=16 bucket_order=0
[ 0.041799] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[ 0.041814] jffs2: version 2.2 (NAND) (SUMMARY) (LZMA) (RTIME) (CMODE_PRIORITY) (c) 2001-2006 Red Hat, Inc.
[ 0.046939] io scheduler noop registered
[ 0.046958] io scheduler deadline registered (default)
[ 0.048966] qcom-pcie 40000000.pci: host bridge /soc/pci@40000000 ranges:
[ 0.049009] qcom-pcie 40000000.pci: IO 0x40200000..0x402fffff -> 0x40200000
[ 0.049035] qcom-pcie 40000000.pci: MEM 0x40300000..0x40ffffff -> 0x40300000
[ 0.264726] qcom-pcie 40000000.pci: Link up
[ 0.264873] qcom-pcie 40000000.pci: PCI host bridge to bus 0000:00
[ 0.264893] pci_bus 0000:00: root bus resource [bus 00-ff]
[ 0.264910] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0x40200000-0x402fffff])
[ 0.264923] pci_bus 0000:00: root bus resource [mem 0x40300000-0x40ffffff]
[ 0.266868] PCI: bus0: Fast back to back transfers disabled
[ 0.269915] PCI: bus1: Fast back to back transfers disabled
[ 0.269971] pci 0000:00:00.0: BAR 8: assigned [mem 0x40400000-0x405fffff]
[ 0.269989] pci 0000:00:00.0: BAR 0: assigned [mem 0x40300000-0x40300fff 64bit]
[ 0.270017] pci 0000:01:00.0: BAR 0: assigned [mem 0x40400000-0x405fffff 64bit]
[ 0.270093] pci 0000:00:00.0: PCI bridge to [bus 01-ff]
[ 0.270109] pci 0000:00:00.0: bridge window [mem 0x40400000-0x405fffff]
[ 0.272450] pcieport 0000:00:00.0: AER enabled with IRQ 97
[ 0.274090] bam-dma-engine 8e04000.dma: num-channels unspecified in dt
[ 0.274106] bam-dma-engine 8e04000.dma: num-ees unspecified in dt
[ 0.275456] tcsr 1949000.tcsr: setting wifi_glb_cfg = 41000000
[ 0.275553] tcsr 194b000.tcsr: setting usb hs phy mode select = e700e7
[ 0.275633] tcsr 1957000.tcsr: setting wifi_noc_memtype_m0_m2 = 2222222
[ 0.275866] Serial: 8250/16550 driver, 2 ports, IRQ sharing disabled
[ 0.276419] msm_serial 78af000.serial: msm_serial: detected port #0
[ 0.276462] msm_serial 78af000.serial: uartclk = 1843200
[ 0.276526] 78af000.serial: ttyMSM0 at MMIO 0x78af000 (irq = 27, base_baud = 115200) is a MSM
[ 0.276552] msm_serial: console setup on port #0
[ 0.894715] console [ttyMSM0] enabled
[ 0.899612] msm_serial: driver initialized
[ 0.907061] loop: module loaded
[ 0.908635] nand: device found, Manufacturer ID: 0xef, Chip ID: 0xda
[ 0.909965] nand: Winbond W29N02GV
[ 0.916601] nand: 256 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[ 0.919876] 16 fixed-partitions partitions found on MTD device qcom_nand.0
[ 0.927343] Creating 16 MTD partitions on "qcom_nand.0":
[ 0.934186] 0x000000000000-0x000000100000 : "0:SBL1"
[ 0.941280] 0x000000100000-0x000000200000 : "0:MIBIB"
[ 0.946184] 0x000000200000-0x000000300000 : "0:QSEE"
[ 0.951067] 0x000000300000-0x000000380000 : "0:CDT"
[ 0.955680] 0x000000380000-0x000000400000 : "0:APPSBLENV"
[ 0.960277] 0x000000400000-0x000000480000 : "0:ART"
[ 0.965867] 0x000000480000-0x000000680000 : "0:APPSBL"
[ 0.971866] 0x000000680000-0x000000700000 : "u_env"
[ 0.975715] 0x000000700000-0x000000740000 : "s_env"
[ 0.980235] 0x000000740000-0x000000780000 : "devinfo"
[ 0.985157] 0x000000780000-0x000005f80000 : "kernel"
[ 0.997055] random: fast init done
[ 1.070895] 0x000000a80000-0x000005f80000 : "rootfs"
[ 1.149831] mtd: device 11 (rootfs) set to be root filesystem
[ 1.150154] mtdsplit: no squashfs found in "rootfs"
[ 1.154580] 0x000005f80000-0x00000b780000 : "alt_kernel"
[ 1.240530] 0x000006280000-0x00000b780000 : "alt_rootfs"
[ 1.319248] 0x00000b780000-0x00000b880000 : "sysdiag"
[ 1.320801] 0x00000b880000-0x00000ff00000 : "syscfg"
[ 1.388836] spi_qup 78b5000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.389494] spi_qup 78b6000.spi: IN:block:16, fifo:64, OUT:block:16, fifo:64
[ 1.395971] libphy: ipq40xx_mdio: probed
[ 1.405935] libphy: Fixed MDIO Bus: probed
[ 1.879947] i2c /dev entries driver
[ 1.880215] i2c_qup 78b7000.i2c: using default clock-frequency 100000
[ 1.887723] NET: Registered protocol family 10
[ 1.890117] Segment Routing with IPv6
[ 1.893269] NET: Registered protocol family 17
[ 1.897344] 8021q: 802.1Q VLAN Support v1.8
[ 1.901400] Registering SWP/SWPB emulation handler
[ 1.910700] ubi0: attaching mtd13
[ 2.400398] random: crng init done
[ 2.529345] ubi0: scanning is finished
[ 2.537281] ubi0: attached mtd13 (name "alt_rootfs", size 85 MiB)
[ 2.537312] ubi0: PEB size: 131072 bytes (128 KiB), LEB size: 126976 bytes
[ 2.542354] ubi0: min./max. I/O unit sizes: 2048/2048, sub-page size 2048
[ 2.549174] ubi0: VID header offset: 2048 (aligned 2048), data offset: 4096
[ 2.556000] ubi0: good PEBs: 680, bad PEBs: 0, corrupted PEBs: 0
[ 2.562753] ubi0: user volume: 2, internal volumes: 1, max. volumes count: 128
[ 2.569020] ubi0: max/mean erase counter: 4/2, WL threshold: 4096, image sequence number: 2015820243
[ 2.576054] ubi0: available PEBs: 0, total reserved PEBs: 680, PEBs reserved for bad PEB handling: 40
[ 2.585357] ubi0: background thread "ubi_bgt0d" started, PID 91
[ 2.586334] block ubiblock0_0: created from ubi0:0(rootfs)
[ 2.600205] hctosys: unable to open rtc device ?[ 2.614966] VFS: Mounted root (squashfs filesystem) readonly on device 254:0.
[ 2.616563] Freeing unused kernel memory: 1024K
[ 2.645493] Run /sbin/init as init process
[ 3.078072] init: Console is alive
[ 3.078313] init: - watchdog -
[ 3.725944] kmodloader: loading kernel modules from /etc/modules-boot.d/*
[ 3.727204] qca8k c000000.switch lan1 (uninitialized): PHY [90000.mdio:00] driver [Generic PHY]
[ 3.733555] qca8k c000000.switch lan2 (uninitialized): PHY [90000.mdio:01] driver [Generic PHY]
[ 3.741933] qca8k c000000.switch lan3 (uninitialized): PHY [90000.mdio:02] driver [Generic PHY]
[ 3.750605] qca8k c000000.switch lan4 (uninitialized): PHY [90000.mdio:03] driver [Generic PHY]
[ 3.759259] qca8k c000000.switch wan0 (uninitialized): PHY [90000.mdio:04] driver [Generic PHY]
[ 3.767086] DSA: tree 0 setup
[ 3.804376] SCSI subsystem initialized
[ 3.840846] dwc3 8a00000.dwc3: Failed to get clk 'ref': -2
[ 3.989176] dwc3 6000000.dwc3: Failed to get clk 'ref': -2
[ 4.120934] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.121011] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[ 4.125633] xhci-hcd xhci-hcd.0.auto: hcc params 0x0228f665 hci version 0x100 quirks 0x0000000002010010
[ 4.132956] xhci-hcd xhci-hcd.0.auto: irq 100, io mem 0x08a00000
[ 4.143280] hub 1-0:1.0: USB hub found
[ 4.148569] hub 1-0:1.0: 1 port detected
[ 4.152398] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[ 4.156183] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[ 4.161445] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[ 4.169170] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.176335] hub 2-0:1.0: USB hub found
[ 4.183967] hub 2-0:1.0: 1 port detected
[ 4.187977] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.191574] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[ 4.197132] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220f665 hci version 0x100 quirks 0x0000000002010010
[ 4.204468] xhci-hcd xhci-hcd.1.auto: irq 101, io mem 0x06000000
[ 4.214570] hub 3-0:1.0: USB hub found
[ 4.220083] hub 3-0:1.0: 1 port detected
[ 4.223911] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[ 4.227698] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[ 4.232972] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[ 4.240620] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 4.247647] hub 4-0:1.0: USB hub found
[ 4.255557] hub 4-0:1.0: config failed, hub doesn't have any ports! (err -19)
[ 4.262860] usbcore: registered new interface driver usb-storage
[ 4.267250] usbcore: registered new interface driver uas
[ 4.272419] kmodloader: done loading kernel modules from /etc/modules-boot.d/*
[ 4.285050] init: - preinit -
[ 4.533931] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[ 4.711004] usb-storage 1-1:1.0: USB Mass Storage device detected
[ 4.711418] scsi host0: usb-storage 1-1:1.0
Cannot find device "wan"
[ 5.503054] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.503169] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 5.508839] qca8k c000000.switch lan1: configuring for phy/ link mode
[ 5.514074] IPv6: ADDRCONF(NETDEV_UP): lan1: link is not ready
DEBUG: Snoozing for 2 seconds to allow qca8k to respond
[ 5.849390] scsi 0:0:0:0: Direct-Access USB DISK 2.0 PMAP PQ: 0 ANSI: 4
[ 6.566671] qca8k c000000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 6.567065] IPv6: ADDRCONF(NETDEV_CHANGE): lan1: link becomes ready
[ 6.683927] sd 0:0:0:0: [sda] 7579008 512-byte logical blocks: (3.88 GB/3.61 GiB)
[ 6.686582] sd 0:0:0:0: [sda] Write Protect is off
[ 6.692756] sd 0:0:0:0: [sda] No Caching mode page found
[ 6.695759] sd 0:0:0:0: [sda] Assuming drive cache: write through
[ 6.752190] sda: sda1
[ 6.754148] sd 0:0:0:0: [sda] Attached SCSI removable disk
Press the [f] key and hit [enter] to enter failsafe mode
Press the [1], [2], [3] or [4] key and hit [enter] to select the debug level
[ 10.758910] mount_root: loading kmods from internal overlay
[ 10.771721] kmodloader: loading kernel modules from //etc/modules-boot.d/*
[ 10.772661] kmodloader: done loading kernel modules from //etc/modules-boot.d/*
[ 11.072204] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 214
[ 11.196320] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 11.196362] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 11.203145] UBIFS (ubi0:1): FS size: 69963776 bytes (66 MiB, 551 LEBs), journal size 3555328 bytes (3 MiB, 28 LEBs)
[ 11.213086] UBIFS (ubi0:1): reserved for root: 3304561 bytes (3227 KiB)
[ 11.223293] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 1B16CD29-E0E7-4C8A-B116-F6EE7797EFEF, small LPT model
[ 11.230796] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 11.241560] block: unable to load configuration (fstab: Entry not found)
[ 11.248239] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[ 11.255174] block: unable to load configuration (fstab: Entry not found)
[ 11.261433] block: attempting to load /etc/config/fstab
[ 11.269418] block: unable to load configuration (fstab: Entry not found)
[ 11.273153] block: no usable configuration
[ 11.318854] UBIFS (ubi0:1): un-mount UBI device 0
[ 11.318977] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" stops
[ 11.327834] UBIFS (ubi0:1): background thread "ubifs_bgt0_1" started, PID 215
[ 11.422353] UBIFS (ubi0:1): UBIFS: mounted UBI device 0, volume 1, name "rootfs_data"
[ 11.422402] UBIFS (ubi0:1): LEB size: 126976 bytes (124 KiB), min./max. I/O unit sizes: 2048 bytes/2048 bytes
[ 11.429259] UBIFS (ubi0:1): FS size: 69963776 bytes (66 MiB, 551 LEBs), journal size 3555328 bytes (3 MiB, 28 LEBs)
[ 11.439100] UBIFS (ubi0:1): reserved for root: 3304561 bytes (3227 KiB)
[ 11.449337] UBIFS (ubi0:1): media format: w4/r0 (latest is w5/r0), UUID 1B16CD29-E0E7-4C8A-B116-F6EE7797EFEF, small LPT model
[ 11.703447] block: attempting to load /tmp/ubifs_cfg/upper/etc/config/fstab
[ 11.703619] block: unable to load configuration (fstab: Entry not found)
[ 11.709587] block: attempting to load /tmp/ubifs_cfg/etc/config/fstab
[ 11.716579] block: unable to load configuration (fstab: Entry not found)
[ 11.722702] block: attempting to load /etc/config/fstab
[ 11.729375] block: unable to load configuration (fstab: Entry not found)
[ 11.734265] block: no usable configuration
[ 11.783600] mount_root: overlay filesystem has not been fully initialized yet
[ 11.790005] mount_root: switching to ubifs overlay
[ 11.806378] overlayfs: upper fs does not support xattr, falling back to index=off and metacopy=off.
- config restore -
[ 11.982120] urandom-seed: Seed file not found (/etc/urandom.seed)
[ 12.054618] qca8k c000000.switch lan1: Link is Down
[ 12.061547] procd: - early -
[ 12.061680] procd: - watchdog -
[ 12.724912] procd: - watchdog -
[ 12.725295] procd: - ubus -
[ 12.783405] procd: - init -
Please press Enter to activate this console.
[ 13.144988] kmodloader: loading kernel modules from /etc/modules.d/*
[ 13.160258] Loading modules backported from Linux version v4.19.23-0-g67d52fae61c1
[ 13.160306] Backport generated by backports.git v4.19.23-1-0-g480a925a
[ 13.186432] xt_time: kernel timezone is -0000
[ 13.226444] PPP generic driver version 2.4.2
[ 13.227521] NET: Registered protocol family 24
[ 13.248080] ath10k 4.19 driver, optimized for CT firmware, probing pci device: 0x56.
[ 13.248841] ath10k_pci 0000:01:00.0: enabling device (0140 -> 0142)
[ 13.255674] ath10k_pci 0000:01:00.0: pci irq msi oper_irq_mode 2 irq_mode 0 reset_mode 0
[ 13.471849] firmware ath10k!fwcfg-pci-0000:01:00.0.txt: firmware_loading_store: map pages failed
[ 13.673044] firmware ath10k!QCA9888!hw2.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 13.756564] firmware ath10k!QCA9888!hw2.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 13.847546] firmware ath10k!QCA9888!hw2.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 14.136189] ath10k_pci 0000:01:00.0: qca9888 hw2.0 target 0x01000000 chip_id 0x00000000 sub 0000:0000
[ 14.136237] ath10k_pci 0000:01:00.0: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 14.148264] ath10k_pci 0000:01:00.0: firmware ver 10.4b-ct-9888-fW-012-38a5514c api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT crc32 2a31e1c4
[ 14.460614] ath10k_pci 0000:01:00.0: board_file api 2 bmi_id 0:23 crc32 441d7caf
[ 16.481916] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 16.481959] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 16.536512] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 16.537562] ath10k_pci 0000:01:00.0: wmi print 'free: 121744 iram: 25908 sram: 30092'
[ 16.709414] ath10k_pci 0000:01:00.0: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 17.476466] firmware ath10k!fwcfg-ahb-a000000.wifi.txt: firmware_loading_store: map pages failed
[ 17.681086] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 17.776652] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 17.878403] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 18.146964] ath10k_ahb a000000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 18.147009] ath10k_ahb a000000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 18.158544] ath10k_ahb a000000.wifi: firmware ver 10.4b-ct-4019-fW-012-38a5514c api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT crc32 0da99c33
[ 18.208347] ath10k_ahb a000000.wifi: board_file api 2 bmi_id 0:20 crc32 097e1b8b
[ 19.521464] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 19.521506] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
[ 19.568142] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 19.569556] ath10k_ahb a000000.wifi: wmi print 'free: 56696 iram: 22168 sram: 35968'
[ 19.733331] ath10k_ahb a000000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 20.354152] firmware ath10k!fwcfg-ahb-a800000.wifi.txt: firmware_loading_store: map pages failed
[ 20.541133] firmware ath10k!QCA4019!hw1.0!ct-firmware-5.bin: firmware_loading_store: map pages failed
[ 20.625176] firmware ath10k!QCA4019!hw1.0!ct-firmware-2.bin: firmware_loading_store: map pages failed
[ 20.716406] firmware ath10k!QCA4019!hw1.0!firmware-6.bin: firmware_loading_store: map pages failed
[ 20.716692] ath10k_ahb a800000.wifi: qca4019 hw1.0 target 0x01000000 chip_id 0x003b00ff sub 0000:0000
[ 20.724291] ath10k_ahb a800000.wifi: kconfig debug 0 debugfs 1 tracing 0 dfs 1 testmode 0
[ 20.738367] ath10k_ahb a800000.wifi: firmware ver 10.4b-ct-4019-fW-012-38a5514c api 5 features mfp,peer-flow-ctrl,txstatus-noack,wmi-10.x-CT,ratemask-CT,regdump-CT,txrate-CT,flush-all-CT,pingpong-CT,ch-regs-CT,nop-CT,set-special-CT,tx-rc-CT,cust-stats-CT,txrate2-CT,beacon-cb-CT crc32 0da99c33
[ 20.786401] ath10k_ahb a800000.wifi: board_file api 2 bmi_id 0:21 crc32 097e1b8b
[ 22.099729] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 22.099776] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
[ 22.149071] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 22.149456] ath10k_ahb a800000.wifi: wmi print 'free: 56696 iram: 22168 sram: 35968'
[ 22.313923] ath10k_ahb a800000.wifi: htt-ver 2.2 wmi-op 6 htt-op 4 cal pre-cal-file max-sta 32 raw 0 hwcrypto 1
[ 22.461220] kmodloader: done loading kernel modules from /etc/modules.d/*
[ 26.470441] qca8k c000000.switch lan1: configuring for phy/ link mode
[ 26.471497] br-lan: port 1(lan1) entered blocking state
[ 26.475937] br-lan: port 1(lan1) entered disabled state
[ 26.481502] device lan1 entered promiscuous mode
[ 26.486187] device eth0 entered promiscuous mode
[ 26.491313] VLAN: dsa_port_vlan_add(dsa_port *dp: 4deb7755)
[ 26.495770] VLAN: net_device->name: lan1
[ 26.500881] VLAN: (port) index: 1, name: lan1, type: 3
[ 26.505084] VLAN: ds->index: 0
[ 26.510005] VLAN: dsa_port_vlan_add(dsa_port *dp: 4deb7755)
[ 26.513030] VLAN: net_device->name: lan1
[ 26.518557] VLAN: (port) index: 1, name: lan1, type: 3
[ 26.522673] VLAN: ds->index: 0
[ 26.530038] IPv6: ADDRCONF(NETDEV_UP): br-lan: link is not ready
[ 26.539043] qca8k c000000.switch lan2: configuring for phy/ link mode
[ 26.540591] br-lan: port 2(lan2) entered blocking state
[ 26.544508] br-lan: port 2(lan2) entered disabled state
[ 26.549983] device lan2 entered promiscuous mode
[ 26.554996] VLAN: dsa_port_vlan_add(dsa_port *dp: e47e7b5f)
[ 26.559585] VLAN: net_device->name: lan2
[ 26.564914] VLAN: (port) index: 2, name: lan2, type: 3
[ 26.569034] VLAN: ds->index: 0
[ 26.573986] VLAN: dsa_port_vlan_add(dsa_port *dp: e47e7b5f)
[ 26.577046] VLAN: net_device->name: lan2
[ 26.582488] VLAN: (port) index: 2, name: lan2, type: 3
[ 26.586708] VLAN: ds->index: 0
[ 26.594891] qca8k c000000.switch lan3: configuring for phy/ link mode
[ 26.595743] br-lan: port 3(lan3) entered blocking state
[ 26.601181] br-lan: port 3(lan3) entered disabled state
[ 26.606722] device lan3 entered promiscuous mode
[ 26.611660] VLAN: dsa_port_vlan_add(dsa_port *dp: 90f18902)
[ 26.616312] VLAN: net_device->name: lan3
[ 26.621564] VLAN: (port) index: 3, name: lan3, type: 3
[ 26.625788] VLAN: ds->index: 0
[ 26.630683] VLAN: dsa_port_vlan_add(dsa_port *dp: 90f18902)
[ 26.633723] VLAN: net_device->name: lan3
[ 26.639242] VLAN: (port) index: 3, name: lan3, type: 3
[ 26.643357] VLAN: ds->index: 0
[ 26.651699] qca8k c000000.switch lan4: configuring for phy/ link mode
[ 26.652852] br-lan: port 4(lan4) entered blocking state
[ 26.657977] br-lan: port 4(lan4) entered disabled state
[ 26.663250] device lan4 entered promiscuous mode
[ 26.668467] VLAN: dsa_port_vlan_add(dsa_port *dp: 4234f3f1)
[ 26.672959] VLAN: net_device->name: lan4
[ 26.678303] VLAN: (port) index: 4, name: lan4, type: 3
[ 26.682420] VLAN: ds->index: 0
[ 26.687443] VLAN: dsa_port_vlan_add(dsa_port *dp: 4234f3f1)
[ 26.690406] VLAN: net_device->name: lan4
[ 26.695919] VLAN: (port) index: 4, name: lan4, type: 3
[ 26.700037] VLAN: ds->index: 0
[ 27.686633] qca8k c000000.switch lan4: Link is Up - 1Gbps/Full - flow control off
[ 27.687908] br-lan: port 4(lan4) entered blocking state
[ 27.693152] br-lan: port 4(lan4) entered forwarding state
[ 27.699564] IPv6: ADDRCONF(NETDEV_CHANGE): br-lan: link becomes ready
[ 29.605942] qca8k c000000.switch lan1: Link is Up - 1Gbps/Full - flow control rx/tx
[ 29.698547] ath10k_ahb a800000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 29.698594] ath10k_ahb a800000.wifi: msdu-desc: 2500 skid: 32
[ 29.745950] ath10k_ahb a800000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 29.748964] ath10k_ahb a800000.wifi: wmi print 'free: 56696 iram: 22168 sram: 35968'
[ 30.043269] ath10k_ahb a800000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 30.043505] IPv6: ADDRCONF(NETDEV_UP): wlan2: link is not ready
[ 30.696904] ath10k_ahb a800000.wifi: NOTE: Firmware DBGLOG output disabled in debug_mask: 0x10000000
[ 31.521551] ath10k_ahb a000000.wifi: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 31.521606] ath10k_ahb a000000.wifi: msdu-desc: 2500 skid: 32
[ 31.569910] ath10k_ahb a000000.wifi: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 31.570307] ath10k_ahb a000000.wifi: wmi print 'free: 56696 iram: 22168 sram: 35968'
[ 31.875512] ath10k_ahb a000000.wifi: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 31.877136] IPv6: ADDRCONF(NETDEV_UP): wlan1: link is not ready
[ 33.995542] ath10k_pci 0000:01:00.0: 10.4 wmi init: vdevs: 16 peers: 48 tid: 96
[ 33.995585] ath10k_pci 0000:01:00.0: msdu-desc: 2500 skid: 32
[ 34.050082] ath10k_pci 0000:01:00.0: wmi print 'P 48/48 V 16 K 144 PH 176 T 186 msdu-desc: 2500 sw-crypt: 0 ct-sta: 0'
[ 34.051154] ath10k_pci 0000:01:00.0: wmi print 'free: 121744 iram: 25908 sram: 30092'
[ 34.365696] ath10k_pci 0000:01:00.0: Firmware lacks feature flag indicating a retry limit of > 2 is OK, requested limit: 4
[ 34.365937] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 34.375805] br-lan: port 1(lan1) entered blocking state
[ 34.381482] br-lan: port 1(lan1) entered forwarding state
[ 34.388397] br-lan: port 5(wlan1) entered blocking state
[ 34.392222] br-lan: port 5(wlan1) entered disabled state
[ 34.397943] device wlan1 entered promiscuous mode
[ 34.403152] br-lan: port 6(wlan2) entered blocking state
[ 34.407558] br-lan: port 6(wlan2) entered disabled state
[ 34.413200] device wlan2 entered promiscuous mode
[ 34.418836] br-lan: port 7(wlan0) entered blocking state
[ 34.422777] br-lan: port 7(wlan0) entered disabled state
[ 34.428532] device wlan0 entered promiscuous mode
[ 34.845328] IPv6: ADDRCONF(NETDEV_CHANGE): wlan1: link becomes ready
[ 34.847461] br-lan: port 5(wlan1) entered blocking state
[ 34.851049] br-lan: port 5(wlan1) entered forwarding state
[ 35.270752] IPv6: ADDRCONF(NETDEV_CHANGE): wlan2: link becomes ready
[ 35.272878] br-lan: port 6(wlan2) entered blocking state
[ 35.276726] br-lan: port 6(wlan2) entered forwarding state
[ 35.507768] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 35.508080] br-lan: port 7(wlan0) entered blocking state
[ 35.513209] br-lan: port 7(wlan0) entered forwarding state
BusyBox v1.30.1 () built-in shell (ash)
_______ ________ __
| |.-----.-----.-----.| | | |.----.| |_
| - || _ | -__| || | | || _|| _|
|_______|| __|_____|__|__||________||__| |____|
|__| W I R E L E S S F R E E D O M
-----------------------------------------------------
OpenWrt SNAPSHOT, r9683+2-b982a66699
-----------------------------------------------------
#
# OpenWrt-2019-03-18_2204-0700-ipq40xx-generic
#
rootfs: mtd13
boot_part=2
boot_count=0
73 bootcount entries. Last ten: 01 00 01 00 01 00 01 00 01 00
root@OpenWrt:/# ip link
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN mode DEFAULT group default qlen 1000
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
2: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP mode DEFAULT group default qlen 1000
link/ether 30:23:03:67:e9:56 brd ff:ff:ff:ff:ff:ff
3: lan1@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP mode DEFAULT group default qlen 1000
link/ether 30:23:03:67:e9:56 brd ff:ff:ff:ff:ff:ff
4: lan2@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
link/ether 30:23:03:67:e9:56 brd ff:ff:ff:ff:ff:ff
5: lan3@eth0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc noqueue master br-lan state LOWERLAYERDOWN mode DEFAULT group default qlen 1000
link/ether 30:23:03:67:e9:56 brd ff:ff:ff:ff:ff:ff
6: lan4@eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP mode DEFAULT group default qlen 1000
link/ether 30:23:03:67:e9:56 brd ff:ff:ff:ff:ff:ff
7: wan0@eth0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN mode DEFAULT group default qlen 1000
link/ether 00:03:7f:ba:db:ad brd ff:ff:ff:ff:ff:ff
11: br-lan: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether 30:23:03:67:e9:56 brd ff:ff:ff:ff:ff:ff
12: wlan1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP mode DEFAULT group default qlen 1000
link/ether 30:23:03:67:e9:58 brd ff:ff:ff:ff:ff:ff
13: wlan0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP mode DEFAULT group default qlen 1000
link/ether 32:23:03:67:e9:5a brd ff:ff:ff:ff:ff:ff
14: wlan2: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc noqueue master br-lan state UP mode DEFAULT group default qlen 1000
link/ether 30:23:03:67:e9:59 brd ff:ff:ff:ff:ff:ff
root@OpenWrt:/# brctl show
bridge name bridge id STP enabled interfaces
br-lan 7fff.30230367e956 no lan1
lan2
lan3
lan4
wlan1
wlan2
wlan0
root@OpenWrt:/# bridge vlan show
port vlan ids
lan1 1 PVID Egress Untagged
lan2 1 PVID Egress Untagged
lan3 1 PVID Egress Untagged
lan4 1 PVID Egress Untagged
br-lan 1 PVID Egress Untagged
wlan1 1 PVID Egress Untagged
wlan0 1 PVID Egress Untagged
wlan2 1 PVID Egress Untagged
root@OpenWrt:/# ip link add link wan0 name wan0.100 type vlan id 100
root@OpenWrt:/# ip link set wan0 up
[ 104.994191] qca8k c000000.switch wan0: configuring for phy/ link mode
[ 104.994465] IPv6: ADDRCONF(NETDEV_UP): wan0: link is not ready
[ 104.999907] IPv6: ADDRCONF(NETDEV_UP): wan0.100: link is not ready
root@OpenWrt:/# [ 106.086762] qca8k c000000.switch wan0: Link is Up - 1Gbps/Full - flow control off
[ 106.087172] IPv6: ADDRCONF(NETDEV_CHANGE): wan0: link becomes ready
[ 106.095911] IPv6: ADDRCONF(NETDEV_CHANGE): wan0.100: link becomes ready
root@OpenWrt:/# ip link set wan0.100 up
root@OpenWrt:/# ip link set wan0.100 master br-lan
[ 125.304300] br-lan: port 8(wan0.100) entered blocking state
[ 125.304384] br-lan: port 8(wan0.100) entered disabled state
[ 125.309269] device wan0.100 entered promiscuous mode
[ 125.314262] device wan0 entered promiscuous mode
[ 125.320068] VLAN: dsa_port_vlan_add(dsa_port *dp: ecf2e7af)
[ 125.324073] VLAN: net_device->name: wan0
[ 125.329413] VLAN: (port) index: 5, name: wan0, type: 3
[ 125.333529] VLAN: ds->index: 0
[ 125.338499] ------------[ cut here ]------------
[ 125.341532] WARNING: CPU: 2 PID: 2722 at net/bridge/br_vlan.c:756 br_vlan_enabled+0x28/0x38
[ 125.346320] VLAN: br_vlan_enabled( (null))
[ 125.354359] Modules linked in: pppoe ppp_async iptable_nat ipt_MASQUERADE ath10k_pci ath10k_core ath xt_state xt_nat xt_conntrack xt_REDIRECT xt_FLOWOFFLOAD pppox ppp_generic nf_nat_ipv4 nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_multiport xt_mark xt_mac xt_limit xt_comment xt_TCPMSS xt_LOG slhc nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_filter ip_tables hwmon crc_ccitt compat configs ledtrig_usbport nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 uas usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom sd_mod scsi_mod gpio_button_hotplug ext4 mbcache jbd2 crc32c_generic
[ 125.403406] CPU: 2 PID: 2722 Comm: ip Not tainted 4.19.25 #0
[ 125.425545] Hardware name: Generic DT based system
[ 125.431387] [<c030e3b4>] (unwind_backtrace) from [<c030ae28>] (show_stack+0x10/0x14)
[ 125.435978] [<c030ae28>] (show_stack) from [<c07437b0>] (dump_stack+0x88/0x9c)
[ 125.443878] [<c07437b0>] (dump_stack) from [<c031c038>] (__warn+0xd4/0xf0)
[ 125.450909] [<c031c038>] (__warn) from [<c031c08c>] (warn_slowpath_fmt+0x38/0x48)
[ 125.457772] [<c031c08c>] (warn_slowpath_fmt) from [<c0732d6c>] (br_vlan_enabled+0x28/0x38)
[ 125.465328] [<c0732d6c>] (br_vlan_enabled) from [<c0737834>] (dsa_port_vlan_add+0x90/0xd0)
[ 125.473487] [<c0737834>] (dsa_port_vlan_add) from [<c073f798>] (__switchdev_port_obj_add+0x30/0x94)
[ 125.481730] [<c073f798>] (__switchdev_port_obj_add) from [<c073f7c8>] (__switchdev_port_obj_add+0x60/0x94)
[ 125.490672] [<c073f7c8>] (__switchdev_port_obj_add) from [<c073f878>] (switchdev_port_obj_add_now+0x7c/0xf0)
[ 125.500394] [<c073f878>] (switchdev_port_obj_add_now) from [<c0735c54>] (br_switchdev_port_vlan_add+0x40/0x48)
[ 125.510378] [<c0735c54>] (br_switchdev_port_vlan_add) from [<c0733f10>] (__vlan_add+0x50/0x58c)
[ 125.520181] [<c0733f10>] (__vlan_add) from [<c07348c0>] (nbp_vlan_add+0xf8/0x124)
[ 125.528774] [<c07348c0>] (nbp_vlan_add) from [<c07349e4>] (nbp_vlan_init+0xf8/0x14c)
[ 125.536413] [<c07349e4>] (nbp_vlan_init) from [<c0725194>] (br_add_if+0x3c4/0x5ac)
[ 125.544227] [<c0725194>] (br_add_if) from [<c065f0a8>] (do_setlink+0x2fc/0x83c)
[ 125.551606] [<c065f0a8>] (do_setlink) from [<c0660fa4>] (rtnl_newlink+0x38c/0x6b0)
[ 125.558810] [<c0660fa4>] (rtnl_newlink) from [<c065ecdc>] (rtnetlink_rcv_msg+0x25c/0x298)
[ 125.566452] [<c065ecdc>] (rtnetlink_rcv_msg) from [<c06807ac>] (netlink_rcv_skb+0x98/0x108)
[ 125.574696] [<c06807ac>] (netlink_rcv_skb) from [<c067ffcc>] (netlink_unicast+0x178/0x20c)
[ 125.582852] [<c067ffcc>] (netlink_unicast) from [<c0680430>] (netlink_sendmsg+0x320/0x368)
[ 125.591189] [<c0680430>] (netlink_sendmsg) from [<c062b9c8>] (sock_sendmsg+0x14/0x24)
[ 125.599434] [<c062b9c8>] (sock_sendmsg) from [<c062bee4>] (___sys_sendmsg+0x208/0x230)
[ 125.607335] [<c062bee4>] (___sys_sendmsg) from [<c062ccf0>] (__sys_sendmsg+0x40/0x64)
[ 125.615146] [<c062ccf0>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
[ 125.623032] Exception stack(0xcadfbfa8 to 0xcadfbff0)
[ 125.630847] bfa0: 00000000 00000000 00000003 be952894 00000000 00000000
[ 125.635976] bfc0: 00000000 00000000 00000003 00000128 5c9079e2 00084004 00000000 00000001
[ 125.644129] bfe0: be952820 be95280c b6f8ea28 b6f8de58
[ 125.652467] ---[ end trace 00c7d7deb16ceba4 ]---
[ 125.657357] Unable to handle kernel NULL pointer dereference at virtual address 000004d8
[ 125.662015] pgd = f846f7e9
[ 125.670108] [000004d8] *pgd=8c9a8835, *pte=00000000, *ppte=00000000
[ 125.672599] Internal error: Oops: 17 [#1] SMP ARM
[ 125.678753] Modules linked in: pppoe ppp_async iptable_nat ipt_MASQUERADE ath10k_pci ath10k_core ath xt_state xt_nat xt_conntrack xt_REDIRECT xt_FLOWOFFLOAD pppox ppp_generic nf_nat_ipv4 nf_nat nf_flow_table_hw nf_flow_table nf_conntrack_rtcache nf_conntrack mac80211 ipt_REJECT cfg80211 xt_time xt_tcpudp xt_multiport xt_mark xt_mac xt_limit xt_comment xt_TCPMSS xt_LOG slhc nf_reject_ipv4 nf_log_ipv4 nf_defrag_ipv6 nf_defrag_ipv4 iptable_mangle iptable_filter ip_tables hwmon crc_ccitt compat configs ledtrig_usbport nf_log_ipv6 nf_log_common ip6table_mangle ip6table_filter ip6_tables ip6t_REJECT x_tables nf_reject_ipv6 uas usb_storage leds_gpio xhci_plat_hcd xhci_pci xhci_hcd dwc3 dwc3_qcom sd_mod scsi_mod gpio_button_hotplug ext4 mbcache jbd2 crc32c_generic
[ 125.728230] CPU: 2 PID: 2722 Comm: ip Tainted: G W 4.19.25 #0
[ 125.750461] Hardware name: Generic DT based system
[ 125.757673] PC is at br_vlan_enabled+0x28/0x38
[ 125.762266] LR is at br_vlan_enabled+0x28/0x38
[ 125.766691] pc : [<c0732d6c>] lr : [<c0732d6c>] psr: 60000013
[ 125.771119] sp : cadfb858 ip : 00000000 fp : cdfa0240
[ 125.777282] r10: 00000001 r9 : cedce4c0 r8 : cadfb89c
[ 125.782490] r7 : cadfb8c4 r6 : cadfb8ec r5 : ffffffa1 r4 : 00000000
[ 125.787701] r3 : 00000200 r2 : 00000200 r1 : c0a24438 r0 : 00000000
[ 125.794299] Flags: nZCv IRQs on FIQs on Mode SVC_32 ISA ARM Segment none
[ 125.800809] Control: 10c5387d Table: 8e63406a DAC: 00000051
[ 125.808018] Process ip (pid: 2722, stack limit = 0xd7efa4e5)
[ 125.813741] Stack: (0xcadfb858 to 0xcadfc000)
[ 125.819472] b840: cf815abc c0737834
[ 125.823736] b860: cadfb8ec cadfb8c4 00000000 00000005 cee6e800 c073f798 00000000 c034d7d0
[ 125.831896] b880: ce63e800 ffffffa1 cadfb8ec cadfb8c4 cadfb89c c073f7c8 cadfb898 ce63e868
[ 125.840057] b8a0: cadfb8c4 00000001 ce63e800 cadfb8ec ce63e800 c073f878 00000002 c034d80c
[ 125.848215] b8c0: 00000000 cadfb8c4 cadfb8c4 c067df01 cf827000 ce066dc0 00000001 ceff9000
[ 125.856375] b8e0: cf992900 c0735c54 00000000 ce63e800 00000001 00000000 00000000 00000000
[ 125.864535] b900: 00010006 00000001 ce67f990 c0733f10 006080c0 00000006 00000004 ce67f980
[ 125.872696] b920: 006000c0 cf992958 006080c0 ceff9000 00000001 cadfb973 00000006 ce066dc0
[ 125.880856] b940: ceff9080 ce667c10 cdfa0240 c07348c0 cf992900 ce667c10 c0a04c48 00000000
[ 125.889014] b960: 00000000 ceff9000 cf992900 c07349e4 00000001 cedce000 00000007 00000002
[ 125.897174] b980: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 125.905334] b9a0: 00000000 00000000 00000000 72ae3661 cedce4c0 00000000 00000000 ce63e800
[ 125.913493] b9c0: ceff9000 c0725194 cadfbd7c 00000000 00000000 00000000 ce63e800 cadfbbf0
[ 125.921653] b9e0: 00000000 c0795394 cadfbd7c c065f0a8 00000000 00000000 00000000 00000000
[ 125.929810] ba00: 00000000 00000000 00000000 00000000 00000001 ce667c20 00000008 00000033
[ 125.937972] ba20: c078faa4 cadfbbf0 0000000a cadfbd7c 00000000 ce63e800 00000000 ce667c00
[ 125.946133] ba40: 00000000 00000000 00000000 cadfbd7c 00000000 c0660fa4 cadfbbf0 cadfbcc0
[ 125.954291] ba60: 00000000 00000000 c0a04c48 cdfa0240 ce667c10 00000000 00000000 00000000
[ 125.962451] ba80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 125.970611] baa0: 00000000 00000000 00000000 00000000 cadfbc70 c05019a0 cf8c8180 ce667b00
[ 125.978775] bac0: 00000000 ce667b10 ce667b00 cdfa03c0 cadfbdfc c0660d30 c078faa4 cadfbdfc
[ 125.986930] bae0: 00000000 00000000 c0a04c48 cdfa03c0 00000000 00000000 00000000 00000000
[ 125.995090] bb00: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 126.003249] bb20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 126.011410] bb40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 126.019570] bb60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 126.027729] bb80: 00000000 00000000 00000000 00000000 00000001 cff55b00 c0941590 c0a23700
[ 126.035889] bba0: 00000001 c03af818 00000000 00000000 c0a23e80 cfdd6590 00000001 00000000
[ 126.044051] bbc0: 0f495000 20000113 00000001 cfdd659c 0f495000 20000113 00000000 cfdd65a4
[ 126.052207] bbe0: 0000000c 00000000 00000000 00000001 00000000 00000000 00000000 00000000
[ 126.060367] bc00: 00000000 00000000 00000000 00000000 00000000 00000000 ce667c20 00000000
[ 126.068527] bc20: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 126.076688] bc40: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 126.084848] bc60: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 126.093005] bc80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 126.101166] bca0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 126.109325] bcc0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 126.117486] bce0: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 00000000
[ 126.125644] bd00: 00000000 00000000 00000000 72ae3661 00000000 cf8c8180 ce667c00 00000000
[ 126.133805] bd20: cdfa0240 cadfbd7c c0a59a90 00000000 00000000 c065ecdc 00000000 00000000
[ 126.141965] bd40: c0a23e80 cfdd6590 00000001 00000000 0f495000 cdfa0240 c0a04c48 c065ea80
[ 126.150126] bd60: ce667c00 00000028 cadfbdbc 00000000 cf827064 c06807ac cadfbd8c 00000000
[ 126.158283] bd80: 00000000 00000000 00000000 00000000 00000000 00000000 00000000 72ae3661
[ 126.166446] bda0: cf827000 00000028 ced97400 cdfa0240 c0a063ec c067ffcc ce667c00 7fffffff
[ 126.174604] bdc0: 00000001 cdfa0240 00000028 ced97400 00000008 006000c0 00000000 cadfbf68
[ 126.182767] bde0: 00000000 c0680430 cadfbf70 00000000 cadfbe48 00000051 cf4faa80 cfa538c0
[ 126.190925] be00: 00000000 00000aa2 00000000 00000000 0000000c cadfbf68 c0a04c48 00000000
[ 126.199085] be20: 00000000 cf4faa80 00000000 cadfbe8c 00000000 c062b9c8 cadfbf68 c062bee4
[ 126.207246] be40: cadfbf68 cf4e3300 00000000 be952904 00000028 00070000 c03a78dc cadfbe78
[ 126.215404] be60: 00000054 cee2d8bc 000ca220 c03d017c 00004000 00000001 ce710ba0 00000054
[ 126.223563] be80: 006000c0 000000ca 000ca000 ce634000 ce634000 00000000 00000000 ceff3280
[ 126.231725] bea0: 00000000 60000013 cadfbecc 00000010 00000000 00000000 fffffff5 c034d7d0
[ 126.239883] bec0: 00000000 cadfbecc 00000000 00000000 cf4fa794 ffffffff ffffffff c078ec40
[ 126.248042] bee0: 00080060 cf647380 cf4fa720 00000000 cf647380 c042c534 cf4fa720 00000000
[ 126.256202] bf00: cf647380 00080060 cf647380 cf647330 00000000 cf647380 00000000 c0758cbc
[ 126.264362] bf20: cf647330 00000000 fffffff5 72ae3661 cf647330 be952894 00000000 cf4faa80
[ 126.272519] bf40: 00000128 c0301204 cadfa000 00000128 00000001 c062ccf0 00000000 00000000
[ 126.280680] bf60: 00000000 fffffff7 cadfbeac 0000000c 00000001 00000000 00000000 cadfbe54
[ 126.288841] bf80: 00000000 c0334ad8 00000000 00000000 00000000 00000000 00000000 00000000
[ 126.296999] bfa0: 00000003 c0301000 00000000 00000000 00000003 be952894 00000000 00000000
[ 126.305161] bfc0: 00000000 00000000 00000003 00000128 5c9079e2 00084004 00000000 00000001
[ 126.313321] bfe0: be952820 be95280c b6f8ea28 b6f8de58 60000010 00000003 00000000 00000000
[ 126.321498] [<c0732d6c>] (br_vlan_enabled) from [<c0737834>] (dsa_port_vlan_add+0x90/0xd0)
[ 126.329652] [<c0737834>] (dsa_port_vlan_add) from [<c073f798>] (__switchdev_port_obj_add+0x30/0x94)
[ 126.337807] [<c073f798>] (__switchdev_port_obj_add) from [<c073f7c8>] (__switchdev_port_obj_add+0x60/0x94)
[ 126.346746] [<c073f7c8>] (__switchdev_port_obj_add) from [<c073f878>] (switchdev_port_obj_add_now+0x7c/0xf0)
[ 126.356470] [<c073f878>] (switchdev_port_obj_add_now) from [<c0735c54>] (br_switchdev_port_vlan_add+0x40/0x48)
[ 126.366454] [<c0735c54>] (br_switchdev_port_vlan_add) from [<c0733f10>] (__vlan_add+0x50/0x58c)
[ 126.376259] [<c0733f10>] (__vlan_add) from [<c07348c0>] (nbp_vlan_add+0xf8/0x124)
[ 126.384853] [<c07348c0>] (nbp_vlan_add) from [<c07349e4>] (nbp_vlan_init+0xf8/0x14c)
[ 126.392493] [<c07349e4>] (nbp_vlan_init) from [<c0725194>] (br_add_if+0x3c4/0x5ac)
[ 126.400306] [<c0725194>] (br_add_if) from [<c065f0a8>] (do_setlink+0x2fc/0x83c)
[ 126.407684] [<c065f0a8>] (do_setlink) from [<c0660fa4>] (rtnl_newlink+0x38c/0x6b0)
[ 126.414887] [<c0660fa4>] (rtnl_newlink) from [<c065ecdc>] (rtnetlink_rcv_msg+0x25c/0x298)
[ 126.422528] [<c065ecdc>] (rtnetlink_rcv_msg) from [<c06807ac>] (netlink_rcv_skb+0x98/0x108)
[ 126.430771] [<c06807ac>] (netlink_rcv_skb) from [<c067ffcc>] (netlink_unicast+0x178/0x20c)
[ 126.438928] [<c067ffcc>] (netlink_unicast) from [<c0680430>] (netlink_sendmsg+0x320/0x368)
[ 126.447265] [<c0680430>] (netlink_sendmsg) from [<c062b9c8>] (sock_sendmsg+0x14/0x24)
[ 126.455510] [<c062b9c8>] (sock_sendmsg) from [<c062bee4>] (___sys_sendmsg+0x208/0x230)
[ 126.463407] [<c062bee4>] (___sys_sendmsg) from [<c062ccf0>] (__sys_sendmsg+0x40/0x64)
[ 126.471222] [<c062ccf0>] (__sys_sendmsg) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
[ 126.479109] Exception stack(0xcadfbfa8 to 0xcadfbff0)
[ 126.486923] bfa0: 00000000 00000000 00000003 be952894 00000000 00000000
[ 126.492052] bfc0: 00000000 00000000 00000003 00000128 5c9079e2 00084004 00000000 00000001
[ 126.500208] bfe0: be952820 be95280c b6f8ea28 b6f8de58
[ 126.508367] Code: e34c0086 e1a03004 e3a01fbd ebefa4b9 (e5d404d8)
[ 126.513879] ---[ end trace 00c7d7deb16ceba5 ]---
[ 126.519491] Kernel panic - not syncing: Fatal exception
[ 126.524172] CPU0: stopping
[ 126.529109] CPU: 0 PID: 1212 Comm: logread Tainted: G D W 4.19.25 #0
[ 126.531884] Hardware name: Generic DT based system
[ 126.539457] [<c030e3b4>] (unwind_backtrace) from [<c030ae28>] (show_stack+0x10/0x14)
[ 126.544137] [<c030ae28>] (show_stack) from [<c07437b0>] (dump_stack+0x88/0x9c)
[ 126.552033] [<c07437b0>] (dump_stack) from [<c030d698>] (handle_IPI+0xf0/0x198)
[ 126.559067] [<c030d698>] (handle_IPI) from [<c0503cd8>] (gic_handle_irq+0x8c/0x90)
[ 126.566272] [<c0503cd8>] (gic_handle_irq) from [<c0301a0c>] (__irq_svc+0x6c/0x90)
[ 126.573900] Exception stack(0xcea61f30 to 0xcea61f78)
[ 126.581454] 1f20: cedc4c7c 00000000 ffff0001 ffff0001
[ 126.586498] 1f40: cedc4c7c cedc4c40 b6fa2000 00000017 c0301204 cea60000 0000005b 00000000
[ 126.594652] 1f60: 10c5387d cea61f80 c03d4410 c075ace0 60000013 ffffffff
[ 126.602821] [<c0301a0c>] (__irq_svc) from [<c075ace0>] (down_write_killable+0x34/0x64)
[ 126.609246] [<c075ace0>] (down_write_killable) from [<c03d4410>] (vm_munmap+0x38/0x74)
[ 126.617230] [<c03d4410>] (vm_munmap) from [<c0301000>] (ret_fast_syscall+0x0/0x54)
[ 126.625113] Exception stack(0xcea61fa8 to 0xcea61ff0)
[ 126.632670] 1fa0: 00000017 b6fa2000 b6fa2000 00000017 00000000 000250e0
[ 126.637799] 1fc0: 00000017 b6fa2000 b6fa3f78 0000005b 00023008 b6f2d058 00000000 00000000
[ 126.645952] 1fe0: 00000050 bed574d0 b6f5d3d4 b6f5d3e0
[ 126.654107] CPU3: stopping
[ 126.659140] CPU: 3 PID: 0 Comm: swapper/3 Tainted: G D W 4.19.25 #0
[ 126.661743] Hardware name: Generic DT based system
[ 126.669310] [<c030e3b4>] (unwind_backtrace) from [<c030ae28>] (show_stack+0x10/0x14)
[ 126.673908] [<c030ae28>] (show_stack) from [<c07437b0>] (dump_stack+0x88/0x9c)
[ 126.681808] [<c07437b0>] (dump_stack) from [<c030d698>] (handle_IPI+0xf0/0x198)
[ 126.688838] [<c030d698>] (handle_IPI) from [<c0503cd8>] (gic_handle_irq+0x8c/0x90)
[ 126.696042] [<c0503cd8>] (gic_handle_irq) from [<c0301a0c>] (__irq_svc+0x6c/0x90)
[ 126.703672] Exception stack(0xcf863f68 to 0xcf863fb0)
[ 126.711229] 3f60: 00000000 00024330 cfde02b0 c0313a20 ffffe000 c0a04c6c
[ 126.716271] 3f80: 00000008 c0a04ca8 c093dd68 00000000 00000000 00000000 0f4a4000 cf863fb8
[ 126.724424] 3fa0: c0308530 c0308534 60000013 ffffffff
[ 126.732588] [<c0301a0c>] (__irq_svc) from [<c0308534>] (arch_cpu_idle+0x34/0x38)
[ 126.737631] [<c0308534>] (arch_cpu_idle) from [<c0340288>] (do_idle+0xf8/0x208)
[ 126.745092] [<c0340288>] (do_idle) from [<c03405f4>] (cpu_startup_entry+0x18/0x1c)
[ 126.752122] [<c03405f4>] (cpu_startup_entry) from [<803023ec>] (0x803023ec)
[ 126.759753] CPU1: stopping
[ 126.766606] CPU: 1 PID: 0 Comm: swapper/1 Tainted: G D W 4.19.25 #0
[ 126.769385] Hardware name: Generic DT based system
[ 126.776948] [<c030e3b4>] (unwind_backtrace) from [<c030ae28>] (show_stack+0x10/0x14)
[ 126.781547] [<c030ae28>] (show_stack) from [<c07437b0>] (dump_stack+0x88/0x9c)
[ 126.789446] [<c07437b0>] (dump_stack) from [<c030d698>] (handle_IPI+0xf0/0x198)
[ 126.796476] [<c030d698>] (handle_IPI) from [<c0503cd8>] (gic_handle_irq+0x8c/0x90)
[ 126.803681] [<c0503cd8>] (gic_handle_irq) from [<c0301a0c>] (__irq_svc+0x6c/0x90)
[ 126.811312] Exception stack(0xcf85ff68 to 0xcf85ffb0)
[ 126.818865] ff60: 00000000 000245dc cfdc22b0 c0313a20 ffffe000 c0a04c6c
[ 126.823910] ff80: 00000002 c0a04ca8 c093dd68 00000000 00000000 00000000 0f486000 cf85ffb8
[ 126.832064] ffa0: c0308530 c0308534 60000013 ffffffff
[ 126.840228] [<c0301a0c>] (__irq_svc) from [<c0308534>] (arch_cpu_idle+0x34/0x38)
[ 126.845268] [<c0308534>] (arch_cpu_idle) from [<c0340288>] (do_idle+0xf8/0x208)
[ 126.852733] [<c0340288>] (do_idle) from [<c03405f4>] (cpu_startup_entry+0x18/0x1c)
[ 126.859760] [<c03405f4>] (cpu_startup_entry) from [<803023ec>] (0x803023ec)
[ 126.867397] Rebooting in 3 seconds..
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
You can’t perform that action at this time.