config.txt

achi pro sc default setup:

Sensor break power -> 0.0
Cycle time 2 (output 2 - cool) -> 10.0
Cycle time 1 (output 1 - heat) -> 3.0
Deviation alarm setpoint -> 1.00
High alarm setpoint -> 300.
Holdback -> 0.
Heat (output 1) output limit -> 100.0
Setpoint high limit -> 260.
Low alarm setpoint -> 500.
Low cutback -> 0.
Setpoint low limit -> 0.
Output power in auto (read only) -> 0.0
Optional status word -> >0000
Last measured value (read only) -> 23.
Relative cooling gain 1 -> 10.0
Local setpoint -> 1.
Setpoint (read only) -> 1.
Ramp-to-setpoint ramp rate -> 10.00
Status word -> >0020
Derivative time -> 9.
Integral time -> 61.
Proportional band -> 10.
Extended status word -> >0000
Level 1 -> 85.
Level 2 -> 140.
Level 3 -> 170.
Level 4 -> 225.
Level 5 -> 235.
Level 6 -> 245.
Level 7 -> 260.
Level 8 -> 260.
Ramp rate 1 -> 1.00
Ramp rate 2 -> 1.00
Ramp rate 3 -> 1.00
Ramp rate 4 -> 1.00
Ramp rate 5 -> -0.01
Ramp rate 6 -> 3.00
Ramp rate 7 -> 3.00
Ramp rate 8 -> 3.00
Dwell 1 -> 70.
Dwell 2 -> 45.
Dwell 3 -> 40.
Dwell 4 -> 55.
Dwell 5 -> 40.
Dwell 6 -> 40.
Dwell 7 -> 40.
Dwell 8 -> 40.