Skip to content

Instantly share code, notes, and snippets.

@jernejcic
Last active August 29, 2015 13:56
Show Gist options
  • Save jernejcic/9122260 to your computer and use it in GitHub Desktop.
Save jernejcic/9122260 to your computer and use it in GitHub Desktop.
.vimrc
" Maintainer: Luke Jernejcic
" Last change: 2014/11/06
"
" To use it, copy it to
" for Unix and OS/2: ~/.vimrc
" for Amiga: s:.vimrc
" for MS-DOS and Win32: $VIM\_vimrc
" for OpenVMS: sys$login:.vimrc
" When started as "evim", evim.vim will already have done these settings.
if v:progname =~? "evim"
finish
endif
" Use Vim settings, rather than Vi settings (much better!).
" This must be first, because it changes other options as a side effect.
set nocompatible
" allow backspacing over everything in insert mode
set backspace=indent,eol,start
execute pathogen#infect()
set laststatus=2 " always show vim-airline status
if has("vms")
set nobackup " do not keep a backup file, use versions instead
else
set backup " keep a backup file
endif
set history=50 " keep 50 lines of command line history
set ruler " show the cursor position all the time
set showcmd " display incomplete commands
set incsearch " do incremental searching
set tabstop=2 " set tab indent to 4 spaces
set shiftwidth=2 "
set expandtab " tab will be turned into spaces
set cursorline " highlight the current cursor line.
set background=dark
colorscheme molokai
" Set list of backup directories; VIM will use the first that exists.
set backupdir=~/.vim-tmp,~/tmp,/var/tmp,$HOME/Local\ Settings/Temp
set clipboard=unnamed
" For Win32 GUI: remove 't' flag from 'guioptions': no tearoff menu entries
" let &guioptions = substitute(&guioptions, "t", "", "g")
" Don't use Ex mode, use Q for formatting
map Q gq
" CTRL-U in insert mode deletes a lot. Use CTRL-G u to first break undo,
" so that you can undo CTRL-U after inserting a line break.
inoremap <C-U> <C-G>u<C-U>
" In many terminal emulators the mouse works just fine, thus enable it.
if has('mouse')
set mouse=a
endif
" Switch syntax highlighting on, when the terminal has colors
" Also switch on highlighting the last used search pattern.
set t_Co=256
if &t_Co > 2 || has("gui_running")
syntax on
set hlsearch
endif
" Only do this part when compiled with support for autocommands.
if has("autocmd")
" Enable file type detection.
" Use the default filetype settings, so that mail gets 'tw' set to 72,
" 'cindent' is on in C files, etc.
" Also load indent files, to automatically do language-dependent indenting.
filetype plugin indent on
" Put these in an autocmd group, so that we can delete them easily.
augroup vimrcEx
au!
" For all text files set 'textwidth' to 78 characters.
autocmd FileType text setlocal textwidth=78
" Remove trailing whitespace.
autocmd FileType html,javascript,scss,css autocmd BufWritePre <buffer> :%s/\s\+$//e
" When editing a file, always jump to the last known cursor position.
" Don't do it when the position is invalid or when inside an event handler
" (happens when dropping a file on gvim).
" Also don't do it when the mark is in the first line, that is the default
" position when opening a file.
autocmd BufReadPost *
\ if line("'\"") > 1 && line("'\"") <= line("$") |
\ exe "normal! g`\"" |
\ endif
augroup END
else
set autoindent " always set autoindenting on
endif " has("autocmd")
" Convenient command to see the difference between the current buffer and the
" file it was loaded from, thus the changes you made.
" Only define it when not defined already.
if !exists(":DiffOrig")
command DiffOrig vert new | set bt=nofile | r # | 0d_ | diffthis
\ | wincmd p | diffthis
endif
" Display all buffers as tabs if only one tab is open
let g:airline#extensions#tabline#enabled = 1
" Fuzzy finder: ignore stuff that can't be opened, and generated files
let g:fuzzy_ignore = "*.png;*.PNG;*.JPG;*.jpg;*.GIF;*.gif;vendor/**;coverage/**;tmp/**;rdoc/**"
let g:airline_powerline_fonts = 1
if !exists('g:airline_symbols')
let g:airline_symbols = {}
endif
" (Hopefully) removes the delay when hitting esc in insert mode
set noesckeys
set ttimeout
set ttimeoutlen=1
" unicode symbols
let g:airline_left_sep = '»'
let g:airline_left_sep = '▶'
let g:airline_right_sep = '«'
let g:airline_right_sep = '◀'
let g:airline_symbols.linenr = '␊'
let g:airline_symbols.linenr = '␤'
let g:airline_symbols.linenr = '¶'
let g:airline_symbols.branch = '⎇'
let g:airline_symbols.paste = 'ρ'
let g:airline_symbols.paste = 'Þ'
let g:airline_symbols.paste = '∥'
let g:airline_symbols.whitespace = 'Ξ'
" Automatically load NERDTree on startup
" autocmd vimenter * NERDTree
" Set tag file search order
set tags=./tags;
" Use ack for grepping from inside VIM
set grepprg=ack
" If a test file, then run the test
map <Leader>t :w<cr>:call RunCurrentTest()<CR>
" Custom keyboard mappings
let mapleader = ","
" Use ,v to make a new vertical split, ,s for a horiz, ,x to close a split
noremap <leader>v <c-w>v<c-w>l
noremap <leader>s <c-w>s<c-w>j
noremap <leader>x <c-w>c
" Use ctrl-h/j/k/l to switch betweeen splits
map <c-j> <c-w>j
map <c-k> <c-w>k
map <c-l> <c-w>l
map <c-h> <c-w>h
" Cycle through grep search results
map <c-n> :cn<cr>
map <c-p> :cp<cr>
" Git blame the highlighted lines
vmap <Leader>b :<C-U>!git blame <C-R>=expand("%:p") <CR> \| sed -n <C-R>=line("'<") <CR>,<C-R>=line("'>") <CR>p <CR>
" Remove highlighting
" map <C-h> :nohl<cr> " Currently used to navigate splits
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
" Test-running stuff
""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""""
function! RunCurrentTest()
let in_test_file = match(expand("%"), '\(.feature\|_spec.rb\|_test.rb\)$') != -1
if in_test_file
call SetTestFile()
if match(expand('%'), '\.feature$') != -1
call SetTestRunner("!bin/cucumber")
exec g:bjo_test_runner g:bjo_test_file
elseif match(expand('%'), '_spec\.rb$') != -1
call SetTestRunner("!bin/rspec")
exec g:bjo_test_runner g:bjo_test_file
else
call SetTestRunner("!ruby -Itest")
exec g:bjo_test_runner g:bjo_test_file
endif
else
exec g:bjo_test_runner g:bjo_test_file
endif
endfunction
function! SetTestRunner(runner)
let g:bjo_test_runner=a:runner
endfunction
function! RunCurrentLineInTest()
let in_test_file = match(expand("%"), '\(.feature\|_spec.rb\|_test.rb\)$') != -1
if in_test_file
call SetTestFileWithLine()
end
exec "!bin/rspec" g:bjo_test_file . ":" . g:bjo_test_file_line
endfunction
function! SetTestFile()
let g:bjo_test_file=@%
endfunction
function! SetTestFileWithLine()
let g:bjo_test_file=@%
let g:bjo_test_file_line=line(".")
endfunction
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment