octoprint debugging

manual_install

root@cb07c6dd839e:/octoprint# pip install "https://github.com/FormerLurker/Octolapse/archive/v0.4.0.zip"
Collecting https://github.com/FormerLurker/Octolapse/archive/v0.4.0.zip
  Downloading https://github.com/FormerLurker/Octolapse/archive/v0.4.0.zip
     | 1.3 MB 2.1 MB/s
Requirement already satisfied: sarge in /usr/local/lib/python3.8/site-packages (from Octolapse==0.4.0) (0.1.5.post0)
Requirement already satisfied: six in /usr/local/lib/python3.8/site-packages (from Octolapse==0.4.0) (1.15.0)
Requirement already satisfied: OctoPrint>1.3.8 in /usr/local/lib/python3.8/site-packages (from Octolapse==0.4.0) (1.5.2)
Requirement already satisfied: psutil in /usr/local/lib/python3.8/site-packages (from Octolapse==0.4.0) (5.8.0)
Requirement already satisfied: setuptools>=6.0 in /usr/local/lib/python3.8/site-packages (from Octolapse==0.4.0) (51.1.0)
Collecting awesome-slugify<1.7,>=1.6.5
  Downloading awesome-slugify-1.6.5.tar.gz (8.4 kB)
Requirement already satisfied: regex in /usr/local/lib/python3.8/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.0) (2020.11.13)
Requirement already satisfied: Unidecode<0.05,>=0.04.14 in /usr/local/lib/python3.8/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.0) (0.4.21)
Requirement already satisfied: wrapt<2,>=1.12.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (1.12.1)
Requirement already satisfied: Flask-Babel<2,>=1.0 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (1.0.0)
Requirement already satisfied: emoji<1,>=0.5.4 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (0.6.0)
Requirement already satisfied: semantic-version<3,>=2.8.5 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (2.8.5)
Requirement already satisfied: watchdog==0.10.4 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (0.10.4)
Requirement already satisfied: netifaces<1,>=0.10.9 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (0.10.9)
Requirement already satisfied: sentry-sdk<1,>=0.15.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (0.19.5)
Requirement already satisfied: Jinja2<3,>=2.11.2 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (2.11.2)
Requirement already satisfied: markupsafe<2.0,>=1.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (1.1.1)
Requirement already satisfied: itsdangerous<2,>=1.1.0 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (1.1.0)
Requirement already satisfied: frozendict<2,>=1.2 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (1.2)
Requirement already satisfied: requests<3,>=2.23.0 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (2.25.1)
Requirement already satisfied: Flask-Assets<3,>=2.0 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (2.0)
Requirement already satisfied: pkginfo<2,>=1.5.0.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (1.6.1)
Requirement already satisfied: filetype<2,>=1.0.7 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (1.0.7)
Requirement already satisfied: flask<2,>=1.1.2 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (1.1.2)
Requirement already satisfied: websocket-client<1,>=0.57 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (0.57.0)
Requirement already satisfied: pylru<2,>=1.2 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (1.2.0)
Requirement already satisfied: tornado==5.1.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (5.1.1)
Requirement already satisfied: rsa==4.0 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (4.0)
Requirement already satisfied: netaddr<1,>=0.7.19 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (0.8.0)
Requirement already satisfied: markdown<3.2,>=3.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (3.1.1)
Requirement already satisfied: PyYAML<6,>=5.3.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (5.3.1)
Requirement already satisfied: Flask-Login<0.6,>=0.5 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (0.5.0)
Requirement already satisfied: feedparser<7,>=6.0.2 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (6.0.2)
Requirement already satisfied: future<1,>=0.18.2 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (0.18.2)
Requirement already satisfied: cachelib<1,>=0.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (0.1.1)
Requirement already satisfied: werkzeug<2,>=1.0.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (1.0.1)
Requirement already satisfied: blinker<2,>=1.4 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (1.4)
Requirement already satisfied: OctoPrint-FileCheck>=2020.08.07 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (2020.8.7)
Requirement already satisfied: Click<8,>=7.1.2 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (7.1.2)
Requirement already satisfied: OctoPrint-FirmwareCheck>=2020.09.23 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (2020.9.23)
Requirement already satisfied: zeroconf<0.25,>=0.24 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (0.24.5)
Requirement already satisfied: pyserial<4,>=3.4 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.0) (3.5)
Requirement already satisfied: pyasn1>=0.1.3 in /usr/local/lib/python3.8/site-packages (from rsa==4.0->OctoPrint>1.3.8->Octolapse==0.4.0) (0.4.8)
Requirement already satisfied: pathtools>=0.1.1 in /usr/local/lib/python3.8/site-packages (from watchdog==0.10.4->OctoPrint>1.3.8->Octolapse==0.4.0) (0.1.2)
Requirement already satisfied: sgmllib3k in /usr/local/lib/python3.8/site-packages (from feedparser<7,>=6.0.2->OctoPrint>1.3.8->Octolapse==0.4.0) (1.0.0)
Requirement already satisfied: webassets>=2.0 in /usr/local/lib/python3.8/site-packages (from Flask-Assets<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.0) (2.0)
Requirement already satisfied: Babel>=2.3 in /usr/local/lib/python3.8/site-packages (from Flask-Babel<2,>=1.0->OctoPrint>1.3.8->Octolapse==0.4.0) (2.9.0)
Requirement already satisfied: pytz in /usr/local/lib/python3.8/site-packages (from Flask-Babel<2,>=1.0->OctoPrint>1.3.8->Octolapse==0.4.0) (2020.5)
Collecting pillow>=6.2.0<7.0.0
  Downloading Pillow-8.1.0-cp38-cp38-manylinux1_x86_64.whl (2.2 MB)
     |████████████████████████████████| 2.2 MB 2.9 MB/s
Requirement already satisfied: chardet<5,>=3.0.2 in /usr/local/lib/python3.8/site-packages (from requests<3,>=2.23.0->OctoPrint>1.3.8->Octolapse==0.4.0) (4.0.0)
Requirement already satisfied: certifi>=2017.4.17 in /usr/local/lib/python3.8/site-packages (from requests<3,>=2.23.0->OctoPrint>1.3.8->Octolapse==0.4.0) (2020.12.5)
Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/local/lib/python3.8/site-packages (from requests<3,>=2.23.0->OctoPrint>1.3.8->Octolapse==0.4.0) (1.26.2)
Requirement already satisfied: idna<3,>=2.5 in /usr/local/lib/python3.8/site-packages (from requests<3,>=2.23.0->OctoPrint>1.3.8->Octolapse==0.4.0) (2.10)
Requirement already satisfied: ifaddr in /usr/local/lib/python3.8/site-packages (from zeroconf<0.25,>=0.24->OctoPrint>1.3.8->Octolapse==0.4.0) (0.1.7)
Collecting file_read_backwards
  Downloading file_read_backwards-2.0.0-py2.py3-none-any.whl (9.0 kB)
Building wheels for collected packages: Octolapse, awesome-slugify
  Building wheel for Octolapse (setup.py) ... error
  ERROR: Command errored out with exit status 1:
   command: /usr/local/bin/python -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-req-build-or4mxm4u/setup.py'"'"'; __file__='"'"'/tmp/pip-req-build-or4mxm4u/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-q9flm82v
       cwd: /tmp/pip-req-build-or4mxm4u/
  Complete output (603 lines):
  likely tags: v0.4.0
  picking v0.4.0
  got version from expanded keyword {'version': 'v0.4.0', 'full-revisionid': 'aeb9350b3e812589452b1904c20b7f9c38904ea1', 'dirty': False, 'error': None, 'date': '2020-06-07T19:06:32-0500'}
  Found packages: {'octoprint_octolapse', 'octoprint_octolapse_setuptools', 'octoprint_octolapse.test'}
  running bdist_wheel
  running build
  running build_py
  creating build
  creating build/lib.linux-x86_64-3.8
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/log.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/camera.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/snapshot.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/error_messages.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/settings_external.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/utility.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/stabilization_gcode.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/gcode_commands.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/render.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/stabilization_preprocessing.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/gcode_processor.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/trigger.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/timelapse.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/_version.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/__init__.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/migration.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/script.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/position.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/settings.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/messenger_worker.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  copying octoprint_octolapse/settings_preprocessor.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse_setuptools
  copying octoprint_octolapse_setuptools/__init__.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse_setuptools
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_octolapseplugin.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_command.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_trigger_layer.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_trigger_gcode.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_render.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_intersection.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_migration_version.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_extruder.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_settings_slicer.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_utility.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_timelapse.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/testing_utilities.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_trigger.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_position.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/__init__.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_snapshotGcode.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_settings.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_parsing.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  copying octoprint_octolapse/test/test_trigger_timer.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
  running egg_info
  creating Octolapse.egg-info
  writing Octolapse.egg-info/PKG-INFO
  writing dependency_links to Octolapse.egg-info/dependency_links.txt
  writing entry points to Octolapse.egg-info/entry_points.txt
  writing requirements to Octolapse.egg-info/requires.txt
  writing top-level names to Octolapse.egg-info/top_level.txt
  writing manifest file 'Octolapse.egg-info/SOURCES.txt'
  reading manifest file 'Octolapse.egg-info/SOURCES.txt'
  reading manifest template 'MANIFEST.in'
  warning: no files found matching 'README.md'
  warning: no files found matching '*' under directory 'octoprint_octolapse/translations'
  warning: no files found matching '*' under directory 'octoprint_octolapse/data/images'
  writing manifest file 'Octolapse.egg-info/SOURCES.txt'
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data
  copying octoprint_octolapse/data/settings_default_0.3.3rc3.dev0.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
  copying octoprint_octolapse/data/settings_default_0.4.0.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
  copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev0.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
  copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev2.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
  copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev3.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
  copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev4.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
  copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev5.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
  copying octoprint_octolapse/data/settings_default_0.4.0rc1.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
  copying octoprint_octolapse/data/settings_default_0.4.0rc2.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
  copying octoprint_octolapse/data/settings_default_0.4.0rc3.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
  copying octoprint_octolapse/data/settings_default_current.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/Images
  copying octoprint_octolapse/data/Images/no-camera-selected.png -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/Images
  copying octoprint_octolapse/data/Images/no-image-available.png -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/Images
  copying octoprint_octolapse/data/Images/no_snapshot.png -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/Images
  copying octoprint_octolapse/data/Images/test-snapshot-image.jpg -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/Images
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/fonts
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/fonts/DejaVu
  copying octoprint_octolapse/data/fonts/DejaVu/DejaVuSansMono.ttf -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/fonts/DejaVu
  copying octoprint_octolapse/data/fonts/DejaVu/license.txt -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/fonts/DejaVu
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/extruder.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/extruder.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/gcode_comment_processor.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/gcode_parser.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/gcode_parser.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/gcode_position.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/gcode_position.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/gcode_position_processor.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/logging.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/logging.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/parsed_command.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/parsed_command.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/parsed_command_parameter.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/parsed_command_parameter.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/position.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/position.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/python_helpers.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/python_helpers.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/snapshot_plan.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/snapshot_plan.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/snapshot_plan_step.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/snapshot_plan_step.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/stabilization.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/stabilization.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/stabilization_results.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/stabilization_results.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/trigger_position.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/trigger_position.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/utilities.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  copying octoprint_octolapse/data/lib/c/utilities.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
  copying octoprint_octolapse/data/scripts/gcode/cura/settings_output.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
  copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_02_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
  copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_03_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
  copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_04_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
  copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_05_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
  copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_06_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
  copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_07_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
  copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_08_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
  copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
  copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_02_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
  copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_03_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
  copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_04_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
  copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_05_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
  copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_06_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
  copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_07_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
  copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_08_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/linux
  copying octoprint_octolapse/data/scripts/linux/capture_image_leave_on_camera.sh -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/linux
  copying octoprint_octolapse/data/scripts/linux/download-from-camera-and-rename.sh -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/linux
  copying octoprint_octolapse/data/scripts/linux/initialize_dslr.sh -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/linux
  copying octoprint_octolapse/data/scripts/linux/move_snapshots_to_target.sh -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/linux
  copying octoprint_octolapse/data/scripts/linux/take_snapshot_and_download.sh -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/linux
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/windows
  copying octoprint_octolapse/data/scripts/windows/take_snapshot_and_download.bat -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/windows
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/templates
  copying octoprint_octolapse/data/templates/cura_gcode_settings_template.txt -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/templates
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types
  copying octoprint_octolapse/data/webcam_types/camera_types.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types/mjpg_streamer
  copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c250.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types/mjpg_streamer
  copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types/mjpg_streamer
  copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_2.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types/mjpg_streamer
  copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_3.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types/mjpg_streamer
  copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.1.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types/mjpg_streamer
  copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types/mjpg_streamer
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/static
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/static/css
  copying octoprint_octolapse/static/css/jquery.minicolors.css -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/css
  copying octoprint_octolapse/static/css/jquery.minicolors.png -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/css
  copying octoprint_octolapse/static/css/octolapse.css -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/css
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/dialog.renderings.in_process.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/dialog.renderings.unfinished.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.import.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.tab.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.timelapse.tab.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_error_not_found.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_no_settings_found.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_settings_missing.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_before_print_start_camera_script_apply_failed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_camera_init_test_failed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_camera_settings_apply_failed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_cant_print_from_sd.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_directory_test_failed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_not_found_at_path.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_not_set.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_retrieve_exception.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_octoprint_version.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_print_start_state.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_m114_not_supported.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_manual_slicer_settings_missing.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_data_found.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_file_data_found.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_no_enabled_cameras.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_no_gcode_filepath_found.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_exists.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_selected.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_octolapse_is_disabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_overlay_font_path_not_found.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_printer_not_configured.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_rendering_file_template_invalid.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_timelapse_start_exception.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_defined.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_offsets_defined.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_unable_to_accept_snapshot_plan.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_unexpected_exception.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_init_unknown_file_origin.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_not_a_valid_error_dict.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_e_unknown.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_xyz_unknown.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_preprocessor_incorrect_trigger_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_definite_position.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_metric_units.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_commands_found.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_plans_returned.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_preprocessor_printer_not_primed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unhandled_exception.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unknown_trigger_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_no_files_found.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_corrupt.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_too_large.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_duplicate_toolhead_numbers.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_extruder_count_mismatch.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_max_extruder_count_exceeded.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_unexpected_max_toolhead_number.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/error_help_timelapse_cannot_aquire_job_lock.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_frames.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_latest_snapshot.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.automatic_update_interval_days.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.automatic_updates_enabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.cancel_print_on_startup_error.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.enabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.is_test_mode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_autoclose.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_seconds.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plans.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.show_extruder_state_changes.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_icon.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_when_not_printing.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.show_position_changes.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.show_printer_state_changes.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.show_snapshot_plan_information.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.show_trigger_state_changes.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.snapshot_archive_directory.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.temporary_directory.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/main_settings.timelapse_directory.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_at_startup.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_before_print.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_when_disabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.camera_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.delay.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.edit_cutsom_image_preferences.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.external_camera_snapshot_script.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.gcode_camera_script.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_render_script.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_gcode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_script.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_render_script.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_gcode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_script.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_end_script.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_start_script.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.snapshot_transpose.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.stream_template.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.timeout_ms.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.address.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.enable_custom_image_preferences.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.ignore_ssl_error.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.1.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029518.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029519.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029538.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029670.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029671.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029675.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094849.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094850.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094851.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094856.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094857.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094858.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094860.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094861.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094867.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094868.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094870.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094871.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094872.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094873.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094874.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10291459.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963776.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963777.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963778.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963788.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963790.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963791.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963795.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963796.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963797.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963800.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963802.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963803.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963804.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963807.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963810.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963818.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.password.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.snapshot_request_template.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.stream_download.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.username.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.library.is_custom.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.logging.enabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.logging.log_all_errors.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.logging.log_to_console.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.logging.logging_level.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.logging.manage_log_files.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.logging.modules_to_log.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.auto_detect_position.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.auto_position_detection_commands.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.is_automatic.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.make.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.model.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.bed_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.custom_bounding_box.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.default_extruder.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions_zhop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.e_axis_default_mode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.extruder_offsets.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.g90_influences_extruder.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.gocde_axis_compatibility_mode_enabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.home_axis_gcode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.invert_e.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.invert_x.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.invert_y.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.invert_z.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.minimum_layer_height.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.num_extruders.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.origin_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.override_octoprint_profile_settings.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.priming_height.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.restrict_snapshot_area.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.shared_extruder.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicer_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.continue_on_failure.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.disable_automatic_save.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.4_2.speed_z_hop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.layer_height.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.max_feedrate_z_override.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_amount.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_enable.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop_enabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_prime_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_retract_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.smooth_spiralized_contours.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.speed_travel.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.axis_speed_display_unit_options.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.deretract_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.layer_height.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_before_move.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_length.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.travel_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.vase_mode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_hop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_travel_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.extruder_use_retract.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.layer_height.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_distance.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_vertical_lift.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.vase_mode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.x_y_axis_movement_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.z_axis_movement_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.deretract_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.layer_height.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_length.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_lift.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.travel_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.vase_mode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.snapshot_command.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.suppress_snapshot_command_always.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.units_default.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.xyz_axes_default_mode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.printer.zero_based_extruder.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.archive_snapshots.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.bitrate.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.constant_rate_factor.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.enable_watermark.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.enabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.fps.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.fps_calculation_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.max_fps.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.min_fps.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.output_format.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.output_template.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_path.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_size.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_color.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_width.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_preview.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_alignment.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_color.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_halign.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_pos_xy.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_valign.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.post_roll_seconds.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.pre_roll_seconds.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.run_length_seconds.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.rendering.thread_count.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.wait_for_moves_to_finish.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_coordinate.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_invert_loop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_loop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_invert_loop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_loop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_coordinate.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_invert_loop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_loop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_invert_loop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_loop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.trigger.calculate_intersections.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.trigger.extruder_state_requirements_enabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.trigger.layer_trigger_height.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_shape.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restrictions_enabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.trigger.require_zhop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_disable_z_lift.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_high_quality.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_smooth.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_trigger_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.trigger.timer_trigger_seconds.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_subtype.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/quality_issues_fast_trigger.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/quality_issues_low_quality_snap_to_print.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/quality_issues_no_print_features_detected.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/settings.import.import_method.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/settings.import.import_text.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  copying octoprint_octolapse/static/docs/help/snapshot_plan_missed_snapshots.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/static/img
  copying octoprint_octolapse/static/img/watermark.png -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/img
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/jquery.minicolors.min.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/jquery.validate.min.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.dialog.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.dialog.renderings.in_process.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.dialog.renderings.unfinished.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.dialog.timelapse_files.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.file_browser.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.help.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.helpers.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.profiles.camera.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.mjpg_streamer.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.profiles.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.profiles.library.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.profiles.logging.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.profiles.printer.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.cura.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.other.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.simplify_3d.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.slic3r_pe.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.profiles.rendering.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.profiles.stabilization.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.profiles.trigger.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.settings.import.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.settings.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.settings.main.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.status.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.status.snapshotplan.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/octolapse.status.snapshotplan_preview.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  copying octoprint_octolapse/static/js/showdown.min.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js/webcams
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js/webcams/mjpg_streamer
  copying octoprint_octolapse/static/js/webcams/mjpg_streamer/raspi_cam_v2.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js/webcams/mjpg_streamer
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_dialog.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_dialog_rendering_in_process.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_dialog_rendering_unfinished.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_dialog_timelapse_files.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_file_browser.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_helpers.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_navbar.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profile_dialog_add_edit.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles_camera.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam_mjpg_streamer.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles_library.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles_logging.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles_printer.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles_printer_automatic.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_automatic.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura_4.2.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_other.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_simplify3d.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_slic3r_pe.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles_rendering.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles_stabilization.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_profiles_trigger.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_settings.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_settings_import.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_settings_main.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_snapshot_plan.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_status_extruder.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_status_position.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_status_printer_state.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_status_snapshot_plan.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_status_triggers.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_tab.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_tab_latest_snapshot.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_tab_settings_current.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_tab_settings_current_cameras.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_tab_snapshot_plan_preview_popup.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  copying octoprint_octolapse/templates/octolapse_tab_webcam_settings_popup.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/templates/webcams
  creating build/lib.linux-x86_64-3.8/octoprint_octolapse/templates/webcams/mjpg_streamer
  copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates/webcams/mjpg_streamer
  copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates/webcams/mjpg_streamer
  copying octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates/webcams/mjpg_streamer
  UPDATING build/lib.linux-x86_64-3.8/octoprint_octolapse/_version.py
  set build/lib.linux-x86_64-3.8/octoprint_octolapse/_version.py to 'v0.4.0'
  running build_ext
  Compiling Octolapse Parser Extension with <distutils.unixccompiler.UnixCCompiler object at 0x7f8065dfa460>.
  building 'GcodePositionProcessor' extension
  creating build/temp.linux-x86_64-3.8
  creating build/temp.linux-x86_64-3.8/octoprint_octolapse
  creating build/temp.linux-x86_64-3.8/octoprint_octolapse/data
  creating build/temp.linux-x86_64-3.8/octoprint_octolapse/data/lib
  creating build/temp.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
  gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -fPIC -I/usr/local/include/python3.8 -c octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -o build/temp.linux-x86_64-3.8/octoprint_octolapse/data/lib/c/gcode_position_processor.o -O3 -std=c++11
  octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:873: warning: ignoring #pragma region location_detection_commands [-Wunknown-pragmas]
    #pragma region location_detection_commands

  octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:907: warning: ignoring #pragma endregion Parse [-Wunknown-pragmas]
    #pragma endregion Parse the list of location detection commands

  octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1061: warning: ignoring #pragma region Extract [-Wunknown-pragmas]
    #pragma region Extract extruder objects

  octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1149: warning: ignoring #pragma endregion Parse [-Wunknown-pragmas]
    #pragma endregion Parse extruder objects

  octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1151: warning: ignoring #pragma region Extract [-Wunknown-pragmas]
    #pragma region Extract firmware extruder offsets from the printer settings

  octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1251: warning: ignoring #pragma endregion Extract [-Wunknown-pragmas]
   #pragma endregion Extract firmware extruder offsets from the printer settings

  octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function ‘PyObject* Initialize(PyObject*, PyObject*)’:
  octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:349:19: warning: unused variable ‘p_gcode_position’ [-Wunused-variable]
     gcode_position* p_gcode_position = NULL;
                     ^~~~~~~~~~~~~~~~
  In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:37,
                   from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
  octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h: At global scope:
  octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h:5:20: warning: ‘SMART_GCODE_STABILIZATION’ defined but not used [-Wunused-variable]
   static const char* SMART_GCODE_STABILIZATION = "smart_gcode";
                      ^~~~~~~~~~~~~~~~~~~~~~~~~
  In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:36,
                   from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
  octoprint_octolapse/data/lib/c/stabilization_smart_layer.h:11:20: warning: ‘SMART_LAYER_STABILIZATION’ defined but not used [-Wunused-variable]
   static const char* SMART_LAYER_STABILIZATION = "smart_layer";
                      ^~~~~~~~~~~~~~~~~~~~~~~~~
  In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:35,
                   from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
  octoprint_octolapse/data/lib/c/stabilization.h:44:20: warning: ‘send_parsed_command_never’ defined but not used [-Wunused-variable]
   static const char* send_parsed_command_never = "never";
                      ^~~~~~~~~~~~~~~~~~~~~~~~~
  octoprint_octolapse/data/lib/c/stabilization.h:43:20: warning: ‘send_parsed_command_last’ defined but not used [-Wunused-variable]
   static const char* send_parsed_command_last = "last";
                      ^~~~~~~~~~~~~~~~~~~~~~~~
  octoprint_octolapse/data/lib/c/stabilization.h:42:20: warning: ‘send_parsed_command_first’ defined but not used [-Wunused-variable]
   static const char* send_parsed_command_first = "first";
                      ^~~~~~~~~~~~~~~~~~~~~~~~~
  octoprint_octolapse/data/lib/c/stabilization.h:41:20: warning: ‘snapshot_action’ defined but not used [-Wunused-variable]
   static const char* snapshot_action = "snapshot";
                      ^~~~~~~~~~~~~~~
  octoprint_octolapse/data/lib/c/stabilization.h:40:20: warning: ‘travel_action’ defined but not used [-Wunused-variable]
   static const char* travel_action = "travel";
                      ^~~~~~~~~~~~~
  gcc: fatal error: Killed signal terminated program cc1plus
  compilation terminated.
  error: command 'gcc' failed with exit status 1
  ----------------------------------------
  ERROR: Failed building wheel for Octolapse
  Running setup.py clean for Octolapse
  Building wheel for awesome-slugify (setup.py) ... done
  Created wheel for awesome-slugify: filename=awesome_slugify-1.6.5-py3-none-any.whl size=8351 sha256=7b5d08cbbdcdddde8809a8f9d1e39f01ad15d23a0172b9694210065179aa266f
  Stored in directory: /root/.cache/pip/wheels/11/27/6f/56a2607c9f8010991f9e8f42c6bc8a90917291b4e1ead4582a
Successfully built awesome-slugify
Failed to build Octolapse
Installing collected packages: pillow, file-read-backwards, awesome-slugify, Octolapse
    Running setup.py install for Octolapse ... error
    ERROR: Command errored out with exit status 1:
     command: /usr/local/bin/python -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-req-build-or4mxm4u/setup.py'"'"'; __file__='"'"'/tmp/pip-req-build-or4mxm4u/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-p2sj6o_o/install-record.txt --single-version-externally-managed --user --prefix= --compile --install-headers /octoprint/plugins/include/python3.8/Octolapse
         cwd: /tmp/pip-req-build-or4mxm4u/
    Complete output (603 lines):
    likely tags: v0.4.0
    picking v0.4.0
    got version from expanded keyword {'version': 'v0.4.0', 'full-revisionid': 'aeb9350b3e812589452b1904c20b7f9c38904ea1', 'dirty': False, 'error': None, 'date': '2020-06-07T19:06:32-0500'}
    Found packages: {'octoprint_octolapse.test', 'octoprint_octolapse_setuptools', 'octoprint_octolapse'}
    running install
    running build
    running build_py
    creating build
    creating build/lib.linux-x86_64-3.8
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/log.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/camera.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/snapshot.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/error_messages.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/settings_external.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/utility.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/stabilization_gcode.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/gcode_commands.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/render.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/stabilization_preprocessing.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/gcode_processor.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/trigger.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/timelapse.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/_version.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/__init__.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/migration.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/script.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/position.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/settings.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/messenger_worker.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    copying octoprint_octolapse/settings_preprocessor.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_octolapseplugin.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_command.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_trigger_layer.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_trigger_gcode.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_render.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_intersection.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_migration_version.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_extruder.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_settings_slicer.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_utility.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_timelapse.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/testing_utilities.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_trigger.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_position.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/__init__.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_snapshotGcode.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_settings.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_parsing.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    copying octoprint_octolapse/test/test_trigger_timer.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse/test
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse_setuptools
    copying octoprint_octolapse_setuptools/__init__.py -> build/lib.linux-x86_64-3.8/octoprint_octolapse_setuptools
    running egg_info
    creating Octolapse.egg-info
    writing Octolapse.egg-info/PKG-INFO
    writing dependency_links to Octolapse.egg-info/dependency_links.txt
    writing entry points to Octolapse.egg-info/entry_points.txt
    writing requirements to Octolapse.egg-info/requires.txt
    writing top-level names to Octolapse.egg-info/top_level.txt
    writing manifest file 'Octolapse.egg-info/SOURCES.txt'
    reading manifest file 'Octolapse.egg-info/SOURCES.txt'
    reading manifest template 'MANIFEST.in'
    warning: no files found matching 'README.md'
    warning: no files found matching '*' under directory 'octoprint_octolapse/translations'
    warning: no files found matching '*' under directory 'octoprint_octolapse/data/images'
    writing manifest file 'Octolapse.egg-info/SOURCES.txt'
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data
    copying octoprint_octolapse/data/settings_default_0.3.3rc3.dev0.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
    copying octoprint_octolapse/data/settings_default_0.4.0.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
    copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev0.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
    copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev2.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
    copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev3.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
    copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev4.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
    copying octoprint_octolapse/data/settings_default_0.4.0rc1.dev5.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
    copying octoprint_octolapse/data/settings_default_0.4.0rc1.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
    copying octoprint_octolapse/data/settings_default_0.4.0rc2.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
    copying octoprint_octolapse/data/settings_default_0.4.0rc3.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
    copying octoprint_octolapse/data/settings_default_current.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/Images
    copying octoprint_octolapse/data/Images/no-camera-selected.png -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/Images
    copying octoprint_octolapse/data/Images/no-image-available.png -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/Images
    copying octoprint_octolapse/data/Images/no_snapshot.png -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/Images
    copying octoprint_octolapse/data/Images/test-snapshot-image.jpg -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/Images
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/fonts
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/fonts/DejaVu
    copying octoprint_octolapse/data/fonts/DejaVu/DejaVuSansMono.ttf -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/fonts/DejaVu
    copying octoprint_octolapse/data/fonts/DejaVu/license.txt -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/fonts/DejaVu
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/extruder.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/extruder.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/gcode_comment_processor.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/gcode_comment_processor.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/gcode_parser.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/gcode_parser.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/gcode_position.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/gcode_position.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/gcode_position_processor.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/logging.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/logging.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/parsed_command.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/parsed_command.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/parsed_command_parameter.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/parsed_command_parameter.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/position.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/position.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/python_helpers.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/python_helpers.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/snapshot_plan.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/snapshot_plan.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/snapshot_plan_step.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/snapshot_plan_step.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/stabilization.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/stabilization.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/stabilization_results.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/stabilization_results.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/stabilization_smart_layer.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/stabilization_snap_to_print.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/trigger_position.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/trigger_position.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/utilities.cpp -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    copying octoprint_octolapse/data/lib/c/utilities.h -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
    copying octoprint_octolapse/data/scripts/gcode/cura/settings_output.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
    copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_02_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
    copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_03_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
    copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_04_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
    copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_05_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
    copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_06_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
    copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_07_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
    copying octoprint_octolapse/data/scripts/gcode/cura/settings_output_08_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
    copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
    copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_02_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
    copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_03_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
    copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_04_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
    copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_05_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
    copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_06_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
    copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_07_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
    copying octoprint_octolapse/data/scripts/gcode/cura/4.2/settings_output_08_extruders.gcode -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/gcode/cura/4.2
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/linux
    copying octoprint_octolapse/data/scripts/linux/capture_image_leave_on_camera.sh -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/linux
    copying octoprint_octolapse/data/scripts/linux/download-from-camera-and-rename.sh -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/linux
    copying octoprint_octolapse/data/scripts/linux/initialize_dslr.sh -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/linux
    copying octoprint_octolapse/data/scripts/linux/move_snapshots_to_target.sh -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/linux
    copying octoprint_octolapse/data/scripts/linux/take_snapshot_and_download.sh -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/linux
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/windows
    copying octoprint_octolapse/data/scripts/windows/take_snapshot_and_download.bat -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/scripts/windows
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/templates
    copying octoprint_octolapse/data/templates/cura_gcode_settings_template.txt -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/templates
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types
    copying octoprint_octolapse/data/webcam_types/camera_types.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types/mjpg_streamer
    copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c250.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types/mjpg_streamer
    copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types/mjpg_streamer
    copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_2.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types/mjpg_streamer
    copying octoprint_octolapse/data/webcam_types/mjpg_streamer/logitech_c920_3.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types/mjpg_streamer
    copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.1.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types/mjpg_streamer
    copying octoprint_octolapse/data/webcam_types/mjpg_streamer/raspi_cam_v2.json -> build/lib.linux-x86_64-3.8/octoprint_octolapse/data/webcam_types/mjpg_streamer
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/static
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/static/css
    copying octoprint_octolapse/static/css/jquery.minicolors.css -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/css
    copying octoprint_octolapse/static/css/jquery.minicolors.png -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/css
    copying octoprint_octolapse/static/css/octolapse.css -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/css
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/dialog.renderings.in_process.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/dialog.renderings.unfinished.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.import.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.snapshot_archive.tab.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/dialog.timelapse_files.timelapse.tab.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_error_not_found.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_no_settings_found.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_automatic_slicer_settings_missing.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_before_print_start_camera_script_apply_failed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_camera_init_test_failed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_camera_settings_apply_failed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_cant_print_from_sd.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_directory_test_failed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_not_found_at_path.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_not_set.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_ffmpeg_path_retrieve_exception.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_octoprint_version.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_incorrect_print_start_state.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_m114_not_supported.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_manual_slicer_settings_missing.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_data_found.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_no_current_job_file_data_found.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_no_enabled_cameras.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_no_gcode_filepath_found.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_exists.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_no_printer_profile_selected.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_octolapse_is_disabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_overlay_font_path_not_found.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_printer_not_configured.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_rendering_file_template_invalid.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_timelapse_start_exception.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_defined.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_too_few_extruders_offsets_defined.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_unable_to_accept_snapshot_plan.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_unexpected_exception.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_init_unknown_file_origin.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_not_a_valid_error_dict.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_e_unknown.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_preprocessor_axis_mode_xyz_unknown.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_preprocessor_incorrect_trigger_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_definite_position.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_metric_units.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_commands_found.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_preprocessor_no_snapshot_plans_returned.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_preprocessor_printer_not_primed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unhandled_exception.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_preprocessor_unknown_trigger_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_no_files_found.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_corrupt.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_rendering_archive_import_zip_file_too_large.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_duplicate_toolhead_numbers.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_extruder_count_mismatch.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_max_extruder_count_exceeded.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_settings_slicer_simplify3d_unexpected_max_toolhead_number.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/error_help_timelapse_cannot_aquire_job_lock.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_frames.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.auto_reload_latest_snapshot.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.automatic_update_interval_days.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.automatic_updates_enabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.cancel_print_on_startup_error.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.enabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.is_test_mode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_autoclose.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plan_seconds.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.preview_snapshot_plans.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.show_extruder_state_changes.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_icon.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.show_navbar_when_not_printing.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.show_position_changes.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.show_printer_state_changes.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.show_snapshot_plan_information.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.show_trigger_state_changes.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.snapshot_archive_directory.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.temporary_directory.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/main_settings.timelapse_directory.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_at_startup.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_before_print.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.apply_settings_when_disabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.camera_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.delay.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.edit_cutsom_image_preferences.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.external_camera_snapshot_script.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.gcode_camera_script.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_render_script.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_gcode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.on_after_snapshot_script.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_render_script.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_gcode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.on_before_snapshot_script.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_end_script.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.on_print_start_script.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.snapshot_transpose.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.stream_template.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.timeout_ms.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.address.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.enable_custom_image_preferences.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.ignore_ssl_error.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.1.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029518.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029519.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029538.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029670.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029671.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10029675.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094849.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094850.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094851.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094856.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094857.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094858.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094860.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094861.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094867.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094868.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094870.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094871.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094872.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094873.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10094874.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.10291459.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963776.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963777.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963778.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963788.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963790.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963791.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963795.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963796.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963797.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963800.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963802.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963803.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963804.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963807.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963810.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.mjpg-streamer.options.9963818.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.password.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.snapshot_request_template.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.stream_download.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.camera.webcam_settings.username.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.library.is_custom.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.logging.enabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.logging.log_all_errors.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.logging.log_to_console.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.logging.logging_level.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.logging.manage_log_files.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.logging.modules_to_log.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.auto_detect_position.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.auto_position_detection_commands.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.is_automatic.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.make.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.automatic_configuration.model.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.bed_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.custom_bounding_box.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.default_extruder.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.default_firmware_retractions_zhop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.e_axis_default_mode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.extruder_offsets.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.g90_influences_extruder.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.gocde_axis_compatibility_mode_enabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.home_axis_gcode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.invert_e.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.invert_x.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.invert_y.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.invert_z.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.minimum_layer_height.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.num_extruders.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.origin_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.override_octoprint_profile_settings.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.priming_height.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.restrict_snapshot_area.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.shared_extruder.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicer_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.continue_on_failure.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.automatic.disable_automatic_save.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.4_2.speed_z_hop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.layer_height.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.max_feedrate_z_override.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_amount.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_enable.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_hop_enabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_prime_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.retraction_retract_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.smooth_spiralized_contours.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.cura.speed_travel.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.axis_speed_display_unit_options.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.deretract_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.layer_height.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_before_move.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_length.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.retract_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.travel_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.vase_mode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_hop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.other.z_travel_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.extruder_use_retract.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.layer_height.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_distance.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.retraction_vertical_lift.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.vase_mode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.x_y_axis_movement_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.simplify3d.z_axis_movement_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.deretract_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.layer_height.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_length.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_lift.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.retract_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.travel_speed.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.slicers.slic3r_pe.vase_mode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.snapshot_command.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.suppress_snapshot_command_always.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.units_default.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.xyz_axes_default_mode.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.printer.zero_based_extruder.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.archive_snapshots.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.bitrate.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.constant_rate_factor.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.enable_watermark.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.enabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.fps.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.fps_calculation_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.max_fps.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.min_fps.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.output_format.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.output_template.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_path.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_font_size.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_color.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_outline_width.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_preview.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_alignment.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_color.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_halign.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_pos_xy.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_template.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.overlay_text_valign.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.post_roll_seconds.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.pre_roll_seconds.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.run_length_seconds.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.rendering.thread_count.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.wait_for_moves_to_finish.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_coordinate.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_invert_loop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_fixed_path_loop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_invert_loop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_relative_path_loop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.x_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_coordinate.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_invert_loop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_fixed_path_loop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_invert_loop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_relative_path_loop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.stabilization.y_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.trigger.calculate_intersections.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.trigger.extruder_state_requirements_enabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.trigger.layer_trigger_height.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_shape.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restriction_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.trigger.position_restrictions_enabled.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.trigger.require_zhop.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_disable_z_lift.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_high_quality.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_snap_to_print_smooth.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.trigger.smart_layer_trigger_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.trigger.timer_trigger_seconds.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_subtype.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/profiles.trigger.trigger_type.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/quality_issues_fast_trigger.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/quality_issues_low_quality_snap_to_print.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/quality_issues_no_print_features_detected.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/settings.import.import_method.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/settings.import.import_text.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    copying octoprint_octolapse/static/docs/help/snapshot_plan_missed_snapshots.md -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/docs/help
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/static/img
    copying octoprint_octolapse/static/img/watermark.png -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/img
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/jquery.minicolors.min.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/jquery.validate.min.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.dialog.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.dialog.renderings.in_process.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.dialog.renderings.unfinished.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.dialog.timelapse_files.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.file_browser.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.help.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.helpers.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.profiles.camera.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.profiles.camera.webcam.mjpg_streamer.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.profiles.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.profiles.library.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.profiles.logging.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.profiles.printer.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.cura.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.other.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.simplify_3d.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.profiles.printer.slicer.slic3r_pe.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.profiles.rendering.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.profiles.stabilization.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.profiles.trigger.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.settings.import.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.settings.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.settings.main.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.status.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.status.snapshotplan.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/octolapse.status.snapshotplan_preview.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    copying octoprint_octolapse/static/js/showdown.min.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js/webcams
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js/webcams/mjpg_streamer
    copying octoprint_octolapse/static/js/webcams/mjpg_streamer/raspi_cam_v2.js -> build/lib.linux-x86_64-3.8/octoprint_octolapse/static/js/webcams/mjpg_streamer
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_dialog.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_dialog_rendering_in_process.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_dialog_rendering_unfinished.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_dialog_timelapse_files.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_file_browser.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_helpers.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_navbar.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profile_dialog_add_edit.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles_camera.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles_camera_webcam_mjpg_streamer.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles_library.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles_logging.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles_printer.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles_printer_automatic.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_automatic.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_cura_4.2.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_other.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_simplify3d.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles_printer_slicer_slic3r_pe.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles_rendering.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles_stabilization.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_profiles_trigger.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_settings.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_settings_import.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_settings_main.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_snapshot_plan.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_status_extruder.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_status_position.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_status_printer_state.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_status_snapshot_plan.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_status_triggers.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_tab.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_tab_latest_snapshot.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_tab_settings_current.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_tab_settings_current_cameras.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_tab_snapshot_plan_preview_popup.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    copying octoprint_octolapse/templates/octolapse_tab_webcam_settings_popup.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/templates/webcams
    creating build/lib.linux-x86_64-3.8/octoprint_octolapse/templates/webcams/mjpg_streamer
    copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c250.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates/webcams/mjpg_streamer
    copying octoprint_octolapse/templates/webcams/mjpg_streamer/logitech_c920.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates/webcams/mjpg_streamer
    copying octoprint_octolapse/templates/webcams/mjpg_streamer/raspi_cam_v2.jinja2 -> build/lib.linux-x86_64-3.8/octoprint_octolapse/templates/webcams/mjpg_streamer
    UPDATING build/lib.linux-x86_64-3.8/octoprint_octolapse/_version.py
    set build/lib.linux-x86_64-3.8/octoprint_octolapse/_version.py to 'v0.4.0'
    running build_ext
    Compiling Octolapse Parser Extension with <distutils.unixccompiler.UnixCCompiler object at 0x7fdf09e43910>.
    building 'GcodePositionProcessor' extension
    creating build/temp.linux-x86_64-3.8
    creating build/temp.linux-x86_64-3.8/octoprint_octolapse
    creating build/temp.linux-x86_64-3.8/octoprint_octolapse/data
    creating build/temp.linux-x86_64-3.8/octoprint_octolapse/data/lib
    creating build/temp.linux-x86_64-3.8/octoprint_octolapse/data/lib/c
    gcc -pthread -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -fPIC -I/usr/local/include/python3.8 -c octoprint_octolapse/data/lib/c/gcode_position_processor.cpp -o build/temp.linux-x86_64-3.8/octoprint_octolapse/data/lib/c/gcode_position_processor.o -O3 -std=c++11
    octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:873: warning: ignoring #pragma region location_detection_commands [-Wunknown-pragmas]
      #pragma region location_detection_commands

    octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:907: warning: ignoring #pragma endregion Parse [-Wunknown-pragmas]
      #pragma endregion Parse the list of location detection commands

    octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1061: warning: ignoring #pragma region Extract [-Wunknown-pragmas]
      #pragma region Extract extruder objects

    octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1149: warning: ignoring #pragma endregion Parse [-Wunknown-pragmas]
      #pragma endregion Parse extruder objects

    octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1151: warning: ignoring #pragma region Extract [-Wunknown-pragmas]
      #pragma region Extract firmware extruder offsets from the printer settings

    octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:1251: warning: ignoring #pragma endregion Extract [-Wunknown-pragmas]
     #pragma endregion Extract firmware extruder offsets from the printer settings

    octoprint_octolapse/data/lib/c/gcode_position_processor.cpp: In function ‘PyObject* Initialize(PyObject*, PyObject*)’:
    octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:349:19: warning: unused variable ‘p_gcode_position’ [-Wunused-variable]
       gcode_position* p_gcode_position = NULL;
                       ^~~~~~~~~~~~~~~~
    In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:37,
                     from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
    octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h: At global scope:
    octoprint_octolapse/data/lib/c/stabilization_smart_gcode.h:5:20: warning: ‘SMART_GCODE_STABILIZATION’ defined but not used [-Wunused-variable]
     static const char* SMART_GCODE_STABILIZATION = "smart_gcode";
                        ^~~~~~~~~~~~~~~~~~~~~~~~~
    In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:36,
                     from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
    octoprint_octolapse/data/lib/c/stabilization_smart_layer.h:11:20: warning: ‘SMART_LAYER_STABILIZATION’ defined but not used [-Wunused-variable]
     static const char* SMART_LAYER_STABILIZATION = "smart_layer";
                        ^~~~~~~~~~~~~~~~~~~~~~~~~
    In file included from octoprint_octolapse/data/lib/c/gcode_position_processor.h:35,
                     from octoprint_octolapse/data/lib/c/gcode_position_processor.cpp:23:
    octoprint_octolapse/data/lib/c/stabilization.h:44:20: warning: ‘send_parsed_command_never’ defined but not used [-Wunused-variable]
     static const char* send_parsed_command_never = "never";
                        ^~~~~~~~~~~~~~~~~~~~~~~~~
    octoprint_octolapse/data/lib/c/stabilization.h:43:20: warning: ‘send_parsed_command_last’ defined but not used [-Wunused-variable]
     static const char* send_parsed_command_last = "last";
                        ^~~~~~~~~~~~~~~~~~~~~~~~
    octoprint_octolapse/data/lib/c/stabilization.h:42:20: warning: ‘send_parsed_command_first’ defined but not used [-Wunused-variable]
     static const char* send_parsed_command_first = "first";
                        ^~~~~~~~~~~~~~~~~~~~~~~~~
    octoprint_octolapse/data/lib/c/stabilization.h:41:20: warning: ‘snapshot_action’ defined but not used [-Wunused-variable]
     static const char* snapshot_action = "snapshot";
                        ^~~~~~~~~~~~~~~
    octoprint_octolapse/data/lib/c/stabilization.h:40:20: warning: ‘travel_action’ defined but not used [-Wunused-variable]
     static const char* travel_action = "travel";
                        ^~~~~~~~~~~~~
    gcc: fatal error: Killed signal terminated program cc1plus
    compilation terminated.
    error: command 'gcc' failed with exit status 1
    ----------------------------------------
ERROR: Command errored out with exit status 1: /usr/local/bin/python -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-req-build-or4mxm4u/setup.py'"'"'; __file__='"'"'/tmp/pip-req-build-or4mxm4u/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' install --record /tmp/pip-record-p2sj6o_o/install-record.txt --single-version-externally-managed --user --prefix= --compile --install-headers /octoprint/plugins/include/python3.8/Octolapse Check the logs for full command output.

octoprint.log

2021-01-05 00:48:04,532 - octoprint.plugins.pluginmanager - INFO - Installing plugin from https://github.com/FormerLurker/Octolapse/archive/v0.4.1.zip
2021-01-05 00:48:04,630 - octoprint.plugin.core - INFO - Plugin Pi Support Plugin did not pass check, not loading.
2021-01-05 00:48:14,862 - octoprint.plugins.pluginmanager - ERROR - Could not install plugin from https://github.com/FormerLurker/Octolapse/archive/v0.4.1.zip
Traceback (most recent call last):
  File "/usr/local/lib/python3.8/site-packages/octoprint/plugins/pluginmanager/__init__.py", line 717, in _command_install_archive
    returncode, stdout, stderr = self._call_pip(pip_args)
  File "/usr/local/lib/python3.8/site-packages/octoprint/plugins/pluginmanager/__init__.py", line 1379, in _call_pip
    return self._pip_caller.execute(*args, **kwargs)
  File "/usr/local/lib/python3.8/site-packages/octoprint/util/pip.py", line 209, in execute
    return self.call(command, **kwargs)
  File "/usr/local/lib/python3.8/site-packages/octoprint/util/commandline.py", line 243, in call
    all_stderr += process_stderr(p.stderr.readlines(timeout=0.5))
  File "/usr/local/lib/python3.8/site-packages/octoprint/util/commandline.py", line 239, in process_stderr
    return process_lines(lines, self._log_stderr)
  File "/usr/local/lib/python3.8/site-packages/octoprint/util/commandline.py", line 229, in process_lines
    processed = self._preprocess_lines(
  File "/usr/local/lib/python3.8/site-packages/octoprint/util/pip.py", line 511, in _preprocess_lines
    return list(map(self._preprocess, lines))
  File "/usr/local/lib/python3.8/site-packages/octoprint/util/pip.py", line 530, in _preprocess
    return to_unicode(clean_ansi(text))
  File "/usr/local/lib/python3.8/site-packages/octoprint/util/commandline.py", line 57, in clean_ansi
    return _ANSI_REGEX.sub(b"", line.encode("latin1")).decode("latin1")
UnicodeEncodeError: 'latin-1' codec can't encode character '\u2018' in position 75: ordinal not in range(256)

plugin_pluginmanager_console.log

2021-01-05 00:48:04,846   /usr/local/bin/python -m pip --disable-pip-version-check install file:///tmp/tmpjuk3a1cv/Octolapse-0.4.1.zip --no-cache-dir
2021-01-05 00:48:05,930 > Processing /tmp/tmpjuk3a1cv/Octolapse-0.4.1.zip
2021-01-05 00:48:08,095 > Requirement already satisfied: pillow>=6.2.0<7.0.0 in /octoprint/plugins/lib/python3.8/site-packages (from Octolapse==0.4.1) (8.1.0)
2021-01-05 00:48:08,096 > Requirement already satisfied: sarge in /usr/local/lib/python3.8/site-packages (from Octolapse==0.4.1) (0.1.5.post0)
2021-01-05 00:48:08,097 > Requirement already satisfied: six in /usr/local/lib/python3.8/site-packages (from Octolapse==0.4.1) (1.15.0)
2021-01-05 00:48:08,097 > Requirement already satisfied: OctoPrint>1.3.8 in /usr/local/lib/python3.8/site-packages (from Octolapse==0.4.1) (1.5.2)
2021-01-05 00:48:08,098 > Requirement already satisfied: psutil in /usr/local/lib/python3.8/site-packages (from Octolapse==0.4.1) (5.8.0)
2021-01-05 00:48:08,098 > Requirement already satisfied: file_read_backwards in /octoprint/plugins/lib/python3.8/site-packages (from Octolapse==0.4.1) (2.0.0)
2021-01-05 00:48:08,099 > Requirement already satisfied: setuptools>=6.0 in /usr/local/lib/python3.8/site-packages (from Octolapse==0.4.1) (51.1.0)
2021-01-05 00:48:08,099 > Requirement already satisfied: awesome-slugify<1.7,>=1.6.5 in /octoprint/plugins/lib/python3.8/site-packages (from Octolapse==0.4.1) (1.6.5)
2021-01-05 00:48:08,100 > Requirement already satisfied: regex in /usr/local/lib/python3.8/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.1) (2020.11.13)
2021-01-05 00:48:08,100 > Requirement already satisfied: Unidecode<0.05,>=0.04.14 in /usr/local/lib/python3.8/site-packages (from awesome-slugify<1.7,>=1.6.5->Octolapse==0.4.1) (0.4.21)
2021-01-05 00:48:08,100 > Requirement already satisfied: markupsafe<2.0,>=1.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (1.1.1)
2021-01-05 00:48:08,101 > Requirement already satisfied: Flask-Babel<2,>=1.0 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (1.0.0)
2021-01-05 00:48:08,101 > Requirement already satisfied: rsa==4.0 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (4.0)
2021-01-05 00:48:08,102 > Requirement already satisfied: flask<2,>=1.1.2 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (1.1.2)
2021-01-05 00:48:08,102 > Requirement already satisfied: Jinja2<3,>=2.11.2 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (2.11.2)
2021-01-05 00:48:08,102 > Requirement already satisfied: future<1,>=0.18.2 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (0.18.2)
2021-01-05 00:48:08,103 > Requirement already satisfied: wrapt<2,>=1.12.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (1.12.1)
2021-01-05 00:48:08,103 > Requirement already satisfied: Flask-Assets<3,>=2.0 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (2.0)
2021-01-05 00:48:08,104 > Requirement already satisfied: pkginfo<2,>=1.5.0.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (1.6.1)
2021-01-05 00:48:08,104 > Requirement already satisfied: emoji<1,>=0.5.4 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (0.6.0)
2021-01-05 00:48:08,104 > Requirement already satisfied: feedparser<7,>=6.0.2 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (6.0.2)
2021-01-05 00:48:08,105 > Requirement already satisfied: zeroconf<0.25,>=0.24 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (0.24.5)
2021-01-05 00:48:08,105 > Requirement already satisfied: semantic-version<3,>=2.8.5 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (2.8.5)
2021-01-05 00:48:08,105 > Requirement already satisfied: tornado==5.1.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (5.1.1)
2021-01-05 00:48:08,106 > Requirement already satisfied: watchdog==0.10.4 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (0.10.4)
2021-01-05 00:48:08,106 > Requirement already satisfied: OctoPrint-FirmwareCheck>=2020.09.23 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (2020.9.23)
2021-01-05 00:48:08,106 > Requirement already satisfied: PyYAML<6,>=5.3.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (5.3.1)
2021-01-05 00:48:08,107 > Requirement already satisfied: markdown<3.2,>=3.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (3.1.1)
2021-01-05 00:48:08,108 > Requirement already satisfied: werkzeug<2,>=1.0.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (1.0.1)
2021-01-05 00:48:08,108 > Requirement already satisfied: sentry-sdk<1,>=0.15.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (0.19.5)
2021-01-05 00:48:08,109 > Requirement already satisfied: filetype<2,>=1.0.7 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (1.0.7)
2021-01-05 00:48:08,109 > Requirement already satisfied: requests<3,>=2.23.0 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (2.25.1)
2021-01-05 00:48:08,110 > Requirement already satisfied: websocket-client<1,>=0.57 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (0.57.0)
2021-01-05 00:48:08,110 > Requirement already satisfied: netifaces<1,>=0.10.9 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (0.10.9)
2021-01-05 00:48:08,110 > Requirement already satisfied: blinker<2,>=1.4 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (1.4)
2021-01-05 00:48:08,110 > Requirement already satisfied: cachelib<1,>=0.1 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (0.1.1)
2021-01-05 00:48:08,111 > Requirement already satisfied: Click<8,>=7.1.2 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (7.1.2)
2021-01-05 00:48:08,111 > Requirement already satisfied: Flask-Login<0.6,>=0.5 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (0.5.0)
2021-01-05 00:48:08,112 > Requirement already satisfied: pyserial<4,>=3.4 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (3.5)
2021-01-05 00:48:08,112 > Requirement already satisfied: frozendict<2,>=1.2 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (1.2)
2021-01-05 00:48:08,112 > Requirement already satisfied: netaddr<1,>=0.7.19 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (0.8.0)
2021-01-05 00:48:08,113 > Requirement already satisfied: OctoPrint-FileCheck>=2020.08.07 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (2020.8.7)
2021-01-05 00:48:08,113 > Requirement already satisfied: pylru<2,>=1.2 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (1.2.0)
2021-01-05 00:48:08,114 > Requirement already satisfied: itsdangerous<2,>=1.1.0 in /usr/local/lib/python3.8/site-packages (from OctoPrint>1.3.8->Octolapse==0.4.1) (1.1.0)
2021-01-05 00:48:08,114 > Requirement already satisfied: pyasn1>=0.1.3 in /usr/local/lib/python3.8/site-packages (from rsa==4.0->OctoPrint>1.3.8->Octolapse==0.4.1) (0.4.8)
2021-01-05 00:48:08,114 > Requirement already satisfied: pathtools>=0.1.1 in /usr/local/lib/python3.8/site-packages (from watchdog==0.10.4->OctoPrint>1.3.8->Octolapse==0.4.1) (0.1.2)
2021-01-05 00:48:08,115 > Requirement already satisfied: sgmllib3k in /usr/local/lib/python3.8/site-packages (from feedparser<7,>=6.0.2->OctoPrint>1.3.8->Octolapse==0.4.1) (1.0.0)
2021-01-05 00:48:08,115 > Requirement already satisfied: webassets>=2.0 in /usr/local/lib/python3.8/site-packages (from Flask-Assets<3,>=2.0->OctoPrint>1.3.8->Octolapse==0.4.1) (2.0)
2021-01-05 00:48:08,116 > Requirement already satisfied: Babel>=2.3 in /usr/local/lib/python3.8/site-packages (from Flask-Babel<2,>=1.0->OctoPrint>1.3.8->Octolapse==0.4.1) (2.9.0)
2021-01-05 00:48:08,116 > Requirement already satisfied: pytz in /usr/local/lib/python3.8/site-packages (from Flask-Babel<2,>=1.0->OctoPrint>1.3.8->Octolapse==0.4.1) (2020.5)
2021-01-05 00:48:08,116 > Requirement already satisfied: chardet<5,>=3.0.2 in /octoprint/plugins/lib/python3.8/site-packages (from requests<3,>=2.23.0->OctoPrint>1.3.8->Octolapse==0.4.1) (3.0.4)
2021-01-05 00:48:08,117 > Requirement already satisfied: idna<3,>=2.5 in /usr/local/lib/python3.8/site-packages (from requests<3,>=2.23.0->OctoPrint>1.3.8->Octolapse==0.4.1) (2.10)
2021-01-05 00:48:08,117 > Requirement already satisfied: certifi>=2017.4.17 in /usr/local/lib/python3.8/site-packages (from requests<3,>=2.23.0->OctoPrint>1.3.8->Octolapse==0.4.1) (2020.12.5)
2021-01-05 00:48:08,118 > Requirement already satisfied: urllib3<1.27,>=1.21.1 in /usr/local/lib/python3.8/site-packages (from requests<3,>=2.23.0->OctoPrint>1.3.8->Octolapse==0.4.1) (1.26.2)
2021-01-05 00:48:08,118 > Requirement already satisfied: ifaddr in /usr/local/lib/python3.8/site-packages (from zeroconf<0.25,>=0.24->OctoPrint>1.3.8->Octolapse==0.4.1) (0.1.7)
2021-01-05 00:48:08,119 > Building wheels for collected packages: Octolapse
2021-01-05 00:48:08,119 > Building wheel for Octolapse (setup.py): started

settings.json

{
  "api": {
    "allowCrossOrigin": false,
    "key": "REDACTED"
  },
  "appearance": {
    "closeModalsWithClick": true,
    "color": "default",
    "colorIcon": true,
    "colorTransparent": false,
    "defaultLanguage": "_default",
    "fuzzyTimes": true,
    "name": "",
    "showFahrenheitAlso": true,
    "showInternalFilename": true
  },
  "devel": {
    "pluginTimings": false
  },
  "feature": {
    "autoUppercaseBlacklist": [
      "M117",
      "M118"
    ],
    "g90InfluencesExtruder": false,
    "keyboardControl": true,
    "modelSizeDetection": true,
    "pollWatched": false,
    "printCancelConfirmation": true,
    "printStartConfirmation": false,
    "sdSupport": true,
    "temperatureGraph": true
  },
  "folder": {
    "logs": "/octoprint/octoprint/logs",
    "timelapse": "/octoprint/octoprint/timelapse",
    "timelapseTmp": "/octoprint/octoprint/timelapse/tmp",
    "uploads": "/octoprint/octoprint/uploads",
    "watched": "/octoprint/octoprint/watched"
  },
  "gcodeAnalysis": {
    "runAt": "idle"
  },
  "plugins": {
    "PrintTimeGenius": {
      "allowAnalysisWhileHeating": true,
      "allowAnalysisWhilePrinting": false,
      "analyzers": [
        {
          "command": "\"/usr/local/bin/python\" \"/octoprint/plugins/lib/python3.8/site-packages/octoprint_PrintTimeGenius/analyzers/analyze_gcode_comments.py\" \"{gcode}\"",
          "description": "All gcode analyzers (usually not as good as marlin-calc)",
          "enabled": false
        },
        {
          "command": "\"/usr/local/bin/python\" \"/octoprint/plugins/lib/python3.8/site-packages/octoprint_PrintTimeGenius/analyzers/analyze_progress.py\" marlin-calc \"{gcode}\" \"{mcodes}\"",
          "description": "Marlin firmware simulation (replaces Octoprint built-in, faster and more accurate)",
          "enabled": true
        },
        {
          "command": "\"/usr/local/bin/python\" \"/octoprint/plugins/lib/python3.8/site-packages/octoprint_PrintTimeGenius/analyzers/analyze_gcode_comments.py\" \"{gcode}\" --parsers slic3r_pe_print_time slic3r_pe_print_time_remaining",
          "description": "Use Slic3r PE M73 time remaining",
          "enabled": true
        }
      ],
      "enableOctoPrintAnalyzer": false,
      "exactDurations": true,
      "showStars": true
    },
    "action_command_notification": {
      "enable": true,
      "enable_popups": false
    },
    "action_command_prompt": {
      "command": "M876",
      "enable": "detected",
      "enable_emergency_sending": true,
      "enable_signal_support": true
    },
    "announcements": {
      "channel_order": [
        "_important",
        "_releases",
        "_blog",
        "_plugins",
        "_octopi"
      ],
      "channels": {
        "_blog": {
          "description": "Development news, community spotlights, OctoPrint On Air episodes and more from the official OctoBlog.",
          "name": "On the OctoBlog",
          "priority": 2,
          "read_until": 1608041700,
          "type": "rss",
          "url": "https://octoprint.org/feeds/octoblog.xml"
        },
        "_important": {
          "description": "Important announcements about OctoPrint.",
          "name": "Important Announcements",
          "priority": 1,
          "read_until": 1521111600,
          "type": "rss",
          "url": "https://octoprint.org/feeds/important.xml"
        },
        "_octopi": {
          "description": "News around OctoPi, the Raspberry Pi image including OctoPrint.",
          "name": "OctoPi News",
          "priority": 2,
          "read_until": 1604571600,
          "type": "rss",
          "url": "https://octoprint.org/feeds/octopi.xml"
        },
        "_plugins": {
          "description": "Announcements of new plugins released on the official Plugin Repository.",
          "name": "New Plugins in the Repository",
          "priority": 2,
          "read_until": 1608876000,
          "type": "rss",
          "url": "https://plugins.octoprint.org/feed.xml"
        },
        "_releases": {
          "description": "Announcements of new releases and release candidates of OctoPrint.",
          "name": "Release Announcements",
          "priority": 2,
          "read_until": 1607604000,
          "type": "rss",
          "url": "https://octoprint.org/feeds/releases.xml"
        }
      },
      "display_limit": 3,
      "enabled_channels": [
        "_important",
        "_releases",
        "_blog",
        "_plugins",
        "_octopi"
      ],
      "forced_channels": [
        "_important"
      ],
      "summary_limit": 300,
      "ttl": 360
    },
    "backup": {
      "restore_unsupported": false
    },
    "bedlevelvisualizer": {
      "colorscale": "[[0, \"rebeccapurple\"],[0.4, \"rebeccapurple\"],[0.45, \"blue\"],[0.5, \"green\"],[0.55, \"yellow\"],[0.6, \"red\"],[1, \"red\"]]",
      "command": "G80\t\t\t; run mesh bed leveling routine.\n@BEDLEVELVISUALIZER\t; instruct plugin to start recording responses from printer.\nG81\t\t\t; report mesh bed leveling status.",
      "commands": [],
      "debug_logging": false,
      "descending_x": false,
      "descending_y": false,
      "flipX": false,
      "flipY": false,
      "graph_z_limits": "-2,2",
      "ignore_correction_matrix": false,
      "imperial": false,
      "mesh_timestamp": "1/2/2021, 7:50:57 PM",
      "mesh_unit": 1,
      "reverse": false,
      "rotation": 0,
      "save_mesh": true,
      "save_snapshots": false,
      "screw_hub": 0.5,
      "show_labels": true,
      "show_webcam": false,
      "showdegree": false,
      "stored_mesh": [
        [
          "0.11667",
          "0.14343",
          "0.16093",
          "0.16917",
          "0.16815",
          "0.15787",
          "0.13833"
        ],
        [
          "0.10444",
          "0.13491",
          "0.15522",
          "0.16537",
          "0.16537",
          "0.15522",
          "0.13491"
        ],
        [
          "0.09861",
          "0.12892",
          "0.14941",
          "0.16009",
          "0.16096",
          "0.15201",
          "0.13324"
        ],
        [
          "0.09917",
          "0.12546",
          "0.14352",
          "0.15333",
          "0.15491",
          "0.14824",
          "0.13333"
        ],
        [
          "0.10611",
          "0.12454",
          "0.13753",
          "0.14509",
          "0.14722",
          "0.14392",
          "0.13519"
        ],
        [
          "0.11944",
          "0.12614",
          "0.13145",
          "0.13537",
          "0.13790",
          "0.13904",
          "0.13880"
        ],
        [
          "0.13917",
          "0.13028",
          "0.12528",
          "0.12417",
          "0.12694",
          "0.13361",
          "0.14417"
        ]
      ],
      "stored_mesh_x": [
        0,
        42,
        83,
        125,
        167,
        208,
        250
      ],
      "stored_mesh_y": [
        -4,
        32,
        67,
        103,
        139,
        174,
        210
      ],
      "stored_mesh_z_height": 210,
      "stripFirst": false,
      "timeout": 1800,
      "use_center_origin": false,
      "use_relative_offsets": false
    },
    "discovery": {
      "addresses": null,
      "httpPassword": null,
      "httpUsername": null,
      "interfaces": null,
      "model": {
        "description": null,
        "name": null,
        "number": null,
        "serial": null,
        "url": null,
        "vendor": null,
        "vendorUrl": null
      },
      "pathPrefix": null,
      "publicHost": null,
      "publicPort": null,
      "upnpUuid": "ed2c1046-8126-4f08-8bd1-33b00f08998e",
      "zeroConf": []
    },
    "errortracking": {
      "enabled": false,
      "enabled_unreleased": false,
      "unique_id": "70b281b6-c1eb-4fa0-a911-622ace1b8f1a",
      "url_coreui": "https://1c5aadba206f46cea250f3ef5066e253@o118517.ingest.sentry.io/1374096",
      "url_server": "https://1e1cfca4b230430b82ce56b1fe802437@o118517.ingest.sentry.io/1373987"
    },
    "filamentmanager": {
      "autoPause": false,
      "confirmSpoolSelection": false,
      "currencySymbol": "€",
      "database": {
        "clientID": "1fcf8d9e-4e45-11eb-9285-0242ac110002",
        "name": "",
        "password": "",
        "uri": "postgresql://",
        "useExternal": false,
        "user": ""
      },
      "enableOdometer": true,
      "enableWarning": true,
      "pauseThreshold": 100
    },
    "firmwareupdater": {
      "avrdude_avrmcu": null,
      "avrdude_baudrate": null,
      "avrdude_commandline": "{avrdude} -v -q -p {mcu} -c {programmer} -P {port} -D -C {conffile} -b {baudrate} {disableverify} -U flash:w:{firmware}:i",
      "avrdude_conf": null,
      "avrdude_disableverify": null,
      "avrdude_path": null,
      "avrdude_programmer": null,
      "bossac_commandline": "{bossac} -i -p {port} -U true -e -w {disableverify} -b {firmware} -R",
      "bossac_disableverify": null,
      "bossac_path": null,
      "dfuprog_avrmcu": null,
      "dfuprog_commandline": "sudo {dfuprogrammer} {mcu} flash {firmware} --debug-level 10",
      "dfuprog_erasecommandline": "sudo {dfuprogrammer} {mcu} erase --debug-level 10 --force",
      "dfuprog_path": null,
      "disable_bootloadercheck": null,
      "enable_navbar": false,
      "enable_postflash_commandline": null,
      "enable_postflash_delay": null,
      "enable_postflash_gcode": null,
      "enable_preflash_commandline": null,
      "enable_preflash_delay": null,
      "enable_preflash_gcode": null,
      "flash_method": null,
      "lpc1768_path": null,
      "lpc1768_preflashreset": true,
      "lpc1768_unmount_command": "sudo umount {mountpoint}",
      "plugin_version": "1.7.6",
      "postflash_commandline": null,
      "postflash_delay": "0",
      "postflash_gcode": null,
      "preflash_commandline": null,
      "preflash_delay": "3",
      "preflash_gcode": null,
      "run_postflash_gcode": false,
      "stm32flash_boot0low": false,
      "stm32flash_boot0pin": "rts",
      "stm32flash_execute": true,
      "stm32flash_executeaddress": "0x8000000",
      "stm32flash_path": null,
      "stm32flash_reset": false,
      "stm32flash_resetlow": true,
      "stm32flash_resetpin": "dtr",
      "stm32flash_verify": true
    },
    "gcodeviewer": {
      "mobileSizeThreshold": 2097152,
      "sizeThreshold": 20971520
    },
    "pluginmanager": {
      "confirm_disable": false,
      "dependency_links": false,
      "hidden": [],
      "ignore_throttled": false,
      "notices": "https://plugins.octoprint.org/notices.json",
      "notices_ttl": 360,
      "pip_args": null,
      "pip_force_user": false,
      "repository": "https://plugins.octoprint.org/plugins.json",
      "repository_ttl": 1440
    },
    "softwareupdate": {
      "cache_ttl": 1440,
      "check_overlay_ttl": 360,
      "check_overlay_url": "https://plugins.octoprint.org/update_check_overlay.json",
      "credentials": {},
      "ignore_throttled": false,
      "minimum_free_storage": 150,
      "notify_users": true,
      "octoprint_branch_mappings": [
        {
          "branch": "master",
          "commitish": [
            "master"
          ],
          "name": "Stable"
        },
        {
          "branch": "rc/maintenance",
          "commitish": [
            "rc/maintenance"
          ],
          "name": "Maintenance RCs"
        },
        {
          "branch": "rc/devel",
          "commitish": [
            "rc/maintenance",
            "rc/devel"
          ],
          "name": "Devel RCs"
        }
      ],
      "octoprint_checkout_folder": null,
      "octoprint_method": "pip",
      "octoprint_pip_target": "https://github.com/OctoPrint/OctoPrint/archive/{target_version}.zip",
      "octoprint_release_channel": "master",
      "octoprint_tracked_branch": null,
      "octoprint_type": "github_release",
      "pip_command": null,
      "pip_enable_check": false
    },
    "tracking": {
      "enabled": true,
      "events": {
        "commerror": true,
        "plugin": true,
        "pong": true,
        "printer": true,
        "printer_safety_check": true,
        "printjob": true,
        "slicing": true,
        "startup": true,
        "throttled": true,
        "update": true
      },
      "ping": null,
      "pong": 86400,
      "server": null,
      "unique_id": "c577033f-cf5e-48a7-a714-02595dd00478"
    },
    "virtual_printer": {
      "ambientTemperature": 21.3,
      "brokenM29": true,
      "brokenResend": false,
      "busyInterval": 2,
      "capabilities": {
        "AUTOREPORT_SD_STATUS": true,
        "AUTOREPORT_TEMP": true,
        "EMERGENCY_PARSER": true
      },
      "commandBuffer": 4,
      "echoOnM117": true,
      "enable_eeprom": true,
      "enabled": false,
      "errors": {
        "checksum_mismatch": "Checksum mismatch",
        "checksum_missing": "Missing checksum",
        "command_unknown": "Unknown command {}",
        "lineno_mismatch": "expected line {} got {}",
        "lineno_missing": "No Line Number with checksum, Last Line: {}",
        "maxtemp": "MAXTEMP triggered!",
        "mintemp": "MINTEMP triggered!"
      },
      "firmwareName": "Virtual Marlin 1.0",
      "forceChecksum": false,
      "hasBed": true,
      "hasChamber": false,
      "includeCurrentToolInTemps": true,
      "includeFilenameInOpened": true,
      "klipperTemperatureReporting": false,
      "m105NoTargetFormatString": "{heater}:{actual:.2f}",
      "m105TargetFormatString": "{heater}:{actual:.2f}/ {target:.2f}",
      "m114FormatString": "X:{x} Y:{y} Z:{z} E:{e[current]} Count: A:{a} B:{b} C:{c}",
      "m115FormatString": "FIRMWARE_NAME:{firmware_name} PROTOCOL_VERSION:1.0",
      "m115ReportCapabilities": true,
      "numExtruders": 1,
      "okAfterResend": false,
      "okBeforeCommandOutput": false,
      "okFormatString": "ok",
      "pinnedExtruders": null,
      "preparedOks": [],
      "repetierStyleTargetTemperature": false,
      "reprapfwM114": false,
      "resend_ratio": 0,
      "resetLines": [
        "start",
        "Marlin: Virtual Marlin!",
        "€",
        "SD card ok"
      ],
      "rxBuffer": 64,
      "sdFiles": {
        "longname": false,
        "size": true
      },
      "sendBusy": false,
      "sendWait": true,
      "sharedNozzle": false,
      "simulateReset": true,
      "smoothieTemperatureReporting": false,
      "supportF": false,
      "supportM112": true,
      "support_M503": true,
      "throttle": 0.01,
      "waitInterval": 1
    },
    "webhooks": {
      "apiSecret": "",
      "content_type": "JSON",
      "data": "{\n  \"deviceIdentifier\":\"@deviceIdentifier\",\n  \"apiSecret\":\"@apiSecret\",\n  \"topic\":\"@topic\",\n  \"message\":\"@message\",\n  \"extra\":\"@extra\",\n  \"state\": \"@state\",\n  \"job\": \"@job\",\n  \"progress\": \"@progress\",\n  \"currentZ\": \"@currentZ\",\n  \"offsets\": \"@offsets\",\n  \"meta\": \"@meta\",\n  \"currentTime\": \"@currentTime\",\n  \"snapshot\": \"@snapshot\"\n}",
      "deviceIdentifier": "",
      "eventError": true,
      "eventErrorMessage": "There was an error.",
      "eventPrintDone": true,
      "eventPrintDoneMessage": "Your print is done.",
      "eventPrintFailed": true,
      "eventPrintFailedMessage": "Something went wrong and your print has failed.",
      "eventPrintPaused": true,
      "eventPrintPausedMessage": "Your print has paused. You might need to change the filament color.",
      "eventPrintProgressMessage": "Your print is @percentCompleteMilestone % complete.",
      "eventPrintStarted": true,
      "eventPrintStartedMessage": "Your print has started.",
      "eventUserActionNeeded": true,
      "eventUserActionNeededMessage": "User action needed. You might need to change the filament color.",
      "event_print_progress": false,
      "event_print_progress_interval": "50",
      "headers": "{\n  \"Content-Type\": \"application/json\"\n}",
      "hooks": [
        {
          "apiSecret": "",
          "content_type": "JSON",
          "data": "{\n  \"deviceIdentifier\":\"@deviceIdentifier\",\n  \"apiSecret\":\"@apiSecret\",\n  \"topic\":\"@topic\",\n  \"message\":\"@message\",\n  \"extra\":\"@extra\",\n  \"state\": \"@state\",\n  \"job\": \"@job\",\n  \"progress\": \"@progress\",\n  \"currentZ\": \"@currentZ\",\n  \"offsets\": \"@offsets\",\n  \"meta\": \"@meta\",\n  \"currentTime\": \"@currentTime\",\n  \"snapshot\": \"@snapshot\"\n}",
          "deviceIdentifier": "",
          "eventError": true,
          "eventErrorMessage": "There was an error.",
          "eventPrintDone": true,
          "eventPrintDoneMessage": "Your print is done.",
          "eventPrintFailed": true,
          "eventPrintFailedMessage": "Something went wrong and your print has failed.",
          "eventPrintPaused": true,
          "eventPrintPausedMessage": "Your print has paused. You might need to change the filament color.",
          "eventPrintProgressMessage": "Your print is @percentCompleteMilestone % complete.",
          "eventPrintStarted": true,
          "eventPrintStartedMessage": "Your print has started.",
          "eventUserActionNeeded": true,
          "eventUserActionNeededMessage": "User action needed. You might need to change the filament color.",
          "event_print_progress": false,
          "event_print_progress_interval": "50",
          "headers": "{\n  \"Content-Type\": \"application/json\"\n}",
          "http_method": "POST",
          "oauth": false,
          "oauth_content_type": "JSON",
          "oauth_data": "{\n  \"client_id\":\"myClient\",\n  \"client_secret\":\"mySecret\",\n  \"grant_type\":\"client_credentials\"\n}",
          "oauth_headers": "{\n  \"Content-Type\": \"application/json\"\n}",
          "oauth_http_method": "POST",
          "oauth_url": "",
          "test_event": "PrintStarted",
          "url": "",
          "webhook_enabled": true
        }
      ],
      "http_method": "POST",
      "oauth": false,
      "oauth_content_type": "JSON",
      "oauth_data": "{\n  \"client_id\":\"myClient\",\n  \"client_secret\":\"mySecret\",\n  \"grant_type\":\"client_credentials\"\n}",
      "oauth_headers": "{\n  \"Content-Type\": \"application/json\"\n}",
      "oauth_http_method": "POST",
      "oauth_url": "",
      "settings_version": 2,
      "test_event": "PrintStarted",
      "url": "",
      "webhook_enabled": true
    }
  },
  "printer": {
    "defaultExtrusionLength": 5
  },
  "scripts": {
    "gcode": {
      "afterPrintCancelled": "; disable motors\nM84\n\n;disable all heaters\n{% snippet 'disable_hotends' %}\n{% snippet 'disable_bed' %}\n;disable fan\nM106 S0",
      "afterPrintPaused": "{% if pause_position.x is not none %}\n; relative XYZE\nG91\nM83\n\n; retract filament of 0.8 mm up, move Z slightly upwards and \nG1 Z+5 E-0.8 F4500\n\n; absolute XYZE\nM82\nG90\n\n; move to a safe rest position, adjust as necessary\nG1 X0 Y0\n{% endif %}",
      "beforePrintResumed": "{% if pause_position.x is not none %}\n; relative extruder\nM83\n\n; prime nozzle\nG1 E-0.8 F4500\nG1 E0.8 F4500\nG1 E0.8 F4500\n\n; absolute E\nM82\n\n; absolute XYZ\nG90\n\n; reset E\nG92 E{{ pause_position.e }}\n\n; WARNING!!! - use M83 or M82(exruder absolute mode) according what your slicer generates\nM83 ; extruder relative mode\n\n; move back to pause position XYZ\nG1 X{{ pause_position.x }} Y{{ pause_position.y }} Z{{ pause_position.z }} F4500\n\n; reset to feed rate before pause if available\n{% if pause_position.f is not none %}G1 F{{ pause_position.f }}{% endif %}\n{% endif %}",
      "snippets/disable_bed": "{% if printer_profile.heatedBed %}M140 S0\n{% endif %}",
      "snippets/disable_hotends": "{% if printer_profile.extruder.sharedNozzle %}M104 T0 S0\n{% else %}{% for tool in range(printer_profile.extruder.count) %}M104 T{{ tool }} S0\n{% endfor %}{% endif %}"
    }
  },
  "serial": {
    "abortHeatupOnCancel": true,
    "ackMax": 1,
    "additionalBaudrates": [],
    "additionalPorts": [],
    "alwaysSendChecksum": false,
    "autoconnect": true,
    "baudrate": 0,
    "baudrateOptions": [
      250000,
      230400,
      115200,
      57600,
      38400,
      19200,
      9600
    ],
    "blacklistedBaudrates": [],
    "blacklistedPorts": [],
    "blockWhileDwelling": false,
    "blockedCommands": [
      "M0",
      "M1"
    ],
    "capAutoreportSdStatus": true,
    "capAutoreportTemp": true,
    "capBusyProtocol": true,
    "capEmergencyParser": true,
    "checksumRequiringCommands": [
      "M110"
    ],
    "disableSdPrintingDetection": false,
    "disconnectOnErrors": true,
    "emergencyCommands": [
      "M112",
      "M108",
      "M410"
    ],
    "exclusive": true,
    "externalHeatupDetection": true,
    "firmwareDetection": true,
    "helloCommand": "M110 N0",
    "ignoreErrorsFromFirmware": false,
    "ignoreIdenticalResends": false,
    "log": false,
    "logPositionOnCancel": false,
    "logPositionOnPause": true,
    "longRunningCommands": [
      "G4",
      "G28",
      "G29",
      "G30",
      "G32",
      "M400",
      "M226",
      "M600"
    ],
    "maxTimeoutsIdle": 2,
    "maxTimeoutsLong": 5,
    "maxTimeoutsPrinting": 5,
    "neverSendChecksum": false,
    "notifySuppressedCommands": "warn",
    "pausingCommands": [
      "M0",
      "M1",
      "M25"
    ],
    "port": "AUTO",
    "portOptions": [
      "/dev/ttyACM0"
    ],
    "repetierTargetTemp": false,
    "resendRatioStart": 100,
    "resendRatioThreshold": 10,
    "sanityCheckTools": true,
    "sdAlwaysAvailable": false,
    "sdRelativePath": false,
    "sendM112OnError": true,
    "supportResendsWithoutOk": "detect",
    "swallowOkAfterResend": true,
    "timeoutBaudrateDetectionPause": 1,
    "timeoutCommunication": 30,
    "timeoutCommunicationBusy": 3,
    "timeoutConnection": 10,
    "timeoutDetectionConsecutive": 2,
    "timeoutDetectionFirst": 10,
    "timeoutPositionLogWait": 10,
    "timeoutSdStatus": 1,
    "timeoutSdStatusAutoreport": 1,
    "timeoutTemperature": 5,
    "timeoutTemperatureAutoreport": 2,
    "timeoutTemperatureTargetSet": 2,
    "triggerOkForM29": true,
    "useParityWorkaround": "detect",
    "waitForStart": false
  },
  "server": {
    "allowFraming": false,
    "commands": {
      "serverRestartCommand": null,
      "systemRestartCommand": null,
      "systemShutdownCommand": null
    },
    "diskspace": {
      "critical": 209715200,
      "warning": 524288000
    },
    "onlineCheck": {
      "enabled": true,
      "host": "8.8.8.8",
      "interval": 15,
      "name": "octoprint.org",
      "port": 53
    },
    "pluginBlacklist": {
      "enabled": true,
      "ttl": 15,
      "url": "https://plugins.octoprint.org/blacklist.json"
    }
  },
  "system": {
    "actions": [],
    "events": null
  },
  "temperature": {
    "cutoff": 30,
    "profiles": [
      {
        "bed": 100,
        "chamber": null,
        "extruder": 210,
        "name": "ABS"
      },
      {
        "bed": 60,
        "chamber": null,
        "extruder": 180,
        "name": "PLA"
      },
      {
        "bed": 80,
        "chamber": 0,
        "extruder": 250,
        "name": "PETG"
      }
    ],
    "sendAutomatically": false,
    "sendAutomaticallyAfter": 1
  },
  "terminalFilters": [
    {
      "name": "Suppress temperature messages",
      "regex": "(Send: (N\\d+\\s+)?M105)|(Recv:\\s+(ok\\s+((P|B|N)\\d+\\s+)*)?(B|T\\d*):\\d+)"
    },
    {
      "name": "Suppress SD status messages",
      "regex": "(Send: (N\\d+\\s+)?M27)|(Recv: SD printing byte)|(Recv: Not SD printing)"
    },
    {
      "name": "Suppress wait responses",
      "regex": "Recv: wait"
    },
    {
      "name": "Suppress processing responses",
      "regex": "Recv: (echo:\\s*)?busy:\\s*processing"
    }
  ],
  "webcam": {
    "bitrate": "10000k",
    "ffmpegPath": "/usr/bin/ffmpeg",
    "ffmpegThreads": 1,
    "ffmpegVideoCodec": "libx264",
    "flipH": false,
    "flipV": false,
    "rotate90": false,
    "snapshotSslValidation": true,
    "snapshotTimeout": 5,
    "snapshotUrl": "http://localhost:8080/?action=snapshot",
    "streamRatio": "16:9",
    "streamTimeout": 5,
    "streamUrl": "/webcam/?action=stream",
    "timelapseEnabled": true,
    "watermark": false,
    "webcamEnabled": true
  }
}