Created
April 14, 2016 07:12
-
-
Save jhitesma/ff474a677032e6266493879cd57a9431 to your computer and use it in GitHub Desktop.
My Sli3er configuration file
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| # generated by Slic3r 1.2.9 on Thu Apr 14 00:07:59 2016 | |
| [filament:ABS - Hatchbox - green] | |
| bed_temperature = 105 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 0 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 60 | |
| filament_colour = #008000 | |
| filament_diameter = 1.74 | |
| first_layer_bed_temperature = 105 | |
| first_layer_temperature = 240 | |
| max_fan_speed = 0 | |
| min_fan_speed = 0 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 30 | |
| temperature = 235 | |
| [filament:FTECH - 2020 i3 - ABS] | |
| bed_temperature = 115 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 0 | |
| extrusion_multiplier = 0.95 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 60 | |
| filament_colour = #FF80FF | |
| filament_diameter = 1.701 | |
| first_layer_bed_temperature = 115 | |
| first_layer_temperature = 230 | |
| max_fan_speed = 0 | |
| min_fan_speed = 0 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 30 | |
| temperature = 225 | |
| [filament:FTECH - 2020 i3 - PLA] | |
| bed_temperature = 80 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 0 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 60 | |
| filament_colour = #FFFFFF | |
| filament_diameter = 1.75 | |
| first_layer_bed_temperature = 85 | |
| first_layer_temperature = 190 | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 30 | |
| temperature = 188 | |
| [filament:FTECH - 2020 i3 - Wood] | |
| bed_temperature = 40 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 3 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 60 | |
| filament_colour = #804000 | |
| filament_diameter = 1.64 | |
| first_layer_bed_temperature = 45 | |
| first_layer_temperature = 210 | |
| max_fan_speed = 100 | |
| min_fan_speed = 40 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 30 | |
| temperature = 208 | |
| [filament:Kossel 2020] | |
| bed_temperature = 100 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 0 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 60 | |
| filament_diameter = 1.75 | |
| first_layer_bed_temperature = 100 | |
| first_layer_temperature = 230 | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 30 | |
| temperature = 200 | |
| [filament:Kossel 2020 pla] | |
| bed_temperature = 70 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 0 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 60 | |
| filament_diameter = 1.75 | |
| first_layer_bed_temperature = 70 | |
| first_layer_temperature = 219 | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 30 | |
| temperature = 219 | |
| [filament:PETG] | |
| bed_temperature = 78 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 4 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 60 | |
| filament_colour = #0000FF | |
| filament_diameter = 1.72 | |
| first_layer_bed_temperature = 82 | |
| first_layer_temperature = 245 | |
| max_fan_speed = 100 | |
| min_fan_speed = 35 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 5 | |
| temperature = 240 | |
| [filament:PETG - Atomic - Gunmetal] | |
| bed_temperature = 78 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 4 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 60 | |
| filament_colour = #404040 | |
| filament_diameter = 1.7 | |
| first_layer_bed_temperature = 82 | |
| first_layer_temperature = 245 | |
| max_fan_speed = 100 | |
| min_fan_speed = 35 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 5 | |
| temperature = 240 | |
| [filament:PETG - MakerGeeks - Turquoise] | |
| bed_temperature = 78 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 4 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 60 | |
| filament_colour = #0DA8F2 | |
| filament_diameter = 1.7 | |
| first_layer_bed_temperature = 82 | |
| first_layer_temperature = 265 | |
| max_fan_speed = 100 | |
| min_fan_speed = 35 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 5 | |
| temperature = 260 | |
| [filament:PLA] | |
| bed_temperature = 65 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 0 | |
| extrusion_multiplier = 0.94 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 60 | |
| filament_colour = #FF8040 | |
| filament_diameter = 1.72 | |
| first_layer_bed_temperature = 70 | |
| first_layer_temperature = 200 | |
| max_fan_speed = 100 | |
| min_fan_speed = 40 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 30 | |
| temperature = 195 | |
| [filament:PLA - Hatchbox Purple] | |
| bed_temperature = 65 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 0 | |
| extrusion_multiplier = 0.83 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 60 | |
| filament_colour = #800080 | |
| filament_diameter = 1.7 | |
| first_layer_bed_temperature = 70 | |
| first_layer_temperature = 200 | |
| max_fan_speed = 100 | |
| min_fan_speed = 40 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 20 | |
| temperature = 195 | |
| [filament:PLA - Maker Geeks Yellow] | |
| bed_temperature = 65 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 0 | |
| extrusion_multiplier = 0.98 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 60 | |
| filament_colour = #FFFF80 | |
| filament_diameter = 1.7 | |
| first_layer_bed_temperature = 70 | |
| first_layer_temperature = 240 | |
| max_fan_speed = 100 | |
| min_fan_speed = 40 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 20 | |
| temperature = 235 | |
| [filament:PLA - Unheated Bed] | |
| bed_temperature = 0 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 0 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 60 | |
| filament_colour = #FF8040 | |
| filament_diameter = 1.72 | |
| first_layer_bed_temperature = 0 | |
| first_layer_temperature = 190 | |
| max_fan_speed = 100 | |
| min_fan_speed = 100 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 30 | |
| temperature = 185 | |
| [filament:PLA -Eco3D - Light Diff] | |
| bed_temperature = 50 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 3 | |
| extrusion_multiplier = 1 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 60 | |
| filament_colour = #FFFFFF | |
| filament_diameter = 1.74 | |
| first_layer_bed_temperature = 55 | |
| first_layer_temperature = 205 | |
| max_fan_speed = 100 | |
| min_fan_speed = 40 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 30 | |
| temperature = 200 | |
| [filament:PLA -Excelfil - black] | |
| bed_temperature = 65 | |
| bridge_fan_speed = 100 | |
| cooling = 1 | |
| disable_fan_first_layers = 0 | |
| extrusion_multiplier = 0.94 | |
| fan_always_on = 1 | |
| fan_below_layer_time = 60 | |
| filament_colour = #000000 | |
| filament_diameter = 1.73 | |
| first_layer_bed_temperature = 70 | |
| first_layer_temperature = 208 | |
| max_fan_speed = 100 | |
| min_fan_speed = 40 | |
| min_print_speed = 10 | |
| slowdown_below_layer_time = 30 | |
| temperature = 205 | |
| [presets] | |
| filament = PETG - Atomic - Gunmetal.ini | |
| print = FT2020 - 4 perim - ubmq.ini | |
| printer = FTECH - 2020 i3 - e3d v6 2.ini | |
| [print:FT2020 - 4 perim - ubmq] | |
| avoid_crossing_perimeters = 1 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.48 | |
| fill_angle = 45 | |
| fill_density = 25% | |
| fill_pattern = honeycomb | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 80 | |
| interface_shells = 0 | |
| layer_height = 0.22 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 4 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = nearest | |
| skirt_distance = 4 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear-grid | |
| support_material_spacing = 2.5 | |
| support_material_speed = 70 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 25 | |
| top_solid_layers = 3 | |
| travel_speed = 140 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 30% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 150% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 50 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = random | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 40 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 45 | |
| top_solid_layers = 3 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - 1mm raft] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.5 | |
| fill_angle = 45 | |
| fill_density = 30% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 150% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 50 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| raft_layers = 5 | |
| resolution = 0 | |
| seam_position = random | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 40 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 45 | |
| top_solid_layers = 3 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - 2 perim] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.48 | |
| fill_angle = 45 | |
| fill_density = 25% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 80 | |
| interface_shells = 0 | |
| layer_height = 0.22 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 2 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 4 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear-grid | |
| support_material_spacing = 2.5 | |
| support_material_speed = 70 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 25 | |
| top_solid_layers = 3 | |
| travel_speed = 140 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - 4 perim] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.48 | |
| fill_angle = 45 | |
| fill_density = 25% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 80 | |
| interface_shells = 0 | |
| layer_height = 0.22 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 0 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 4 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 4 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear-grid | |
| support_material_spacing = 2.5 | |
| support_material_speed = 70 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 25 | |
| top_solid_layers = 3 | |
| travel_speed = 140 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - CAL] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 0 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.48 | |
| fill_angle = 45 | |
| fill_density = 30% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 150% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 50 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = random | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 40 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 45 | |
| top_solid_layers = 0 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - DEFAULT] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 10% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 150% | |
| first_layer_height = 0.4 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 50 | |
| interface_shells = 0 | |
| layer_height = 0.4 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 40 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 45 | |
| top_solid_layers = 3 | |
| travel_speed = 150 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - PETG] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.48 | |
| fill_angle = 45 | |
| fill_density = 25% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 25 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 60 | |
| interface_shells = 0 | |
| layer_height = 0.22 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 40 | |
| perimeters = 3 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 4 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 20 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 35 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 20 | |
| top_solid_layers = 3 | |
| travel_speed = 140 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - abs] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.48 | |
| fill_angle = 45 | |
| fill_density = 30% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 80 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 2 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = random | |
| skirt_distance = 4 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 70 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 25 | |
| top_solid_layers = 3 | |
| travel_speed = 140 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - abs bridge] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 10 | |
| brim_width = 5 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 30% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 150% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 80 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 2 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = random | |
| skirt_distance = 4 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 70 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 25 | |
| top_solid_layers = 3 | |
| travel_speed = 140 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - abs bridge raft] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 10 | |
| brim_width = 10 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 30% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 150% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 80 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 2 | |
| post_process = | |
| raft_layers = 3 | |
| resolution = 0 | |
| seam_position = random | |
| skirt_distance = 4 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 70 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 25 | |
| top_solid_layers = 3 | |
| travel_speed = 140 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - abs raft] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 10 | |
| brim_width = 3 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 30% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 150% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 80 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 3 | |
| post_process = | |
| raft_layers = 2 | |
| resolution = 0 | |
| seam_position = random | |
| skirt_distance = 4 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 70 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 25 | |
| top_solid_layers = 3 | |
| travel_speed = 140 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - fast] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1.41 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 30% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 150% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 120 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 110 | |
| perimeters = 2 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = random | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 110 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 105 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 105 | |
| top_solid_layers = 3 | |
| travel_speed = 150 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - hilbert top] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = hilbertcurve | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 30% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 150% | |
| first_layer_height = 0.4 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 1 | |
| infill_overlap = 15% | |
| infill_speed = 50 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = random | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 40 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 45 | |
| top_solid_layers = 3 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - mpcnc] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.48 | |
| fill_angle = 45 | |
| fill_density = 70% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 1 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 80 | |
| interface_shells = 0 | |
| layer_height = 0.26 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 3 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = random | |
| skirt_distance = 4 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 70 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 25 | |
| top_solid_layers = 3 | |
| travel_speed = 140 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - petg bridge] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 0.7 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.45 | |
| fill_angle = 45 | |
| fill_density = 30% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 150% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 80 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 2 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = random | |
| skirt_distance = 4 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 70 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 25 | |
| top_solid_layers = 3 | |
| travel_speed = 140 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - pla] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.48 | |
| fill_angle = 45 | |
| fill_density = 30% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 80 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 2 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = random | |
| skirt_distance = 4 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 70 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 25 | |
| top_solid_layers = 3 | |
| travel_speed = 140 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - retract_test] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 0.8 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 1 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.48 | |
| fill_angle = 45 | |
| fill_density = 70% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 80 | |
| interface_shells = 0 | |
| layer_height = 0.26 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 3 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = random | |
| skirt_distance = 4 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 70 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 25 | |
| top_solid_layers = 3 | |
| travel_speed = 140 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - retract_test_2] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.48 | |
| fill_angle = 45 | |
| fill_density = 25% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 80 | |
| interface_shells = 0 | |
| layer_height = 0.22 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 3 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 4 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 70 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 25 | |
| top_solid_layers = 3 | |
| travel_speed = 140 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 - support_grid] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 30 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.48 | |
| fill_angle = 45 | |
| fill_density = 25% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 80 | |
| interface_shells = 0 | |
| layer_height = 0.22 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 60 | |
| perimeters = 3 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = aligned | |
| skirt_distance = 4 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 1 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = rectilinear-grid | |
| support_material_spacing = 2.5 | |
| support_material_speed = 70 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 25 | |
| top_solid_layers = 3 | |
| travel_speed = 140 | |
| xy_size_compensation = 0 | |
| [print:FTECH - 2020 i3 test] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0 | |
| fill_angle = 45 | |
| fill_density = 30% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 150% | |
| first_layer_height = 0.3 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 50 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = random | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 40 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 45 | |
| top_solid_layers = 3 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [print:funnel] | |
| avoid_crossing_perimeters = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| default_acceleration = 0 | |
| dont_support_bridges = 1 | |
| external_fill_pattern = rectilinear | |
| external_perimeter_extrusion_width = 0 | |
| external_perimeter_speed = 90% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extrusion_width = 0.8 | |
| fill_angle = 45 | |
| fill_density = 10% | |
| fill_pattern = rectilinear | |
| first_layer_acceleration = 0 | |
| first_layer_extrusion_width = 150% | |
| first_layer_height = 0.4 | |
| first_layer_speed = 50% | |
| gap_fill_speed = 35 | |
| gcode_comments = 0 | |
| infill_acceleration = 0 | |
| infill_every_layers = 1 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_overlap = 15% | |
| infill_speed = 50 | |
| interface_shells = 0 | |
| layer_height = 0.2 | |
| max_print_speed = 80 | |
| max_volumetric_speed = 0 | |
| min_skirt_length = 0 | |
| notes = | |
| only_retract_when_crossing_perimeters = 1 | |
| ooze_prevention = 0 | |
| output_filename_format = [input_filename_base].gcode | |
| overhangs = 1 | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 40 | |
| perimeters = 2 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| seam_position = random | |
| skirt_distance = 3 | |
| skirt_height = 1 | |
| skirts = 3 | |
| small_perimeter_speed = 40 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extruder = 1 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 45 | |
| spiral_vase = 0 | |
| standby_temperature_delta = -5 | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_contact_distance = 0.2 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_extruder = 1 | |
| support_material_interface_layers = 3 | |
| support_material_interface_spacing = 0 | |
| support_material_interface_speed = 100% | |
| support_material_pattern = pillars | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 0 | |
| thin_walls = 1 | |
| threads = 2 | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 45 | |
| top_solid_layers = 3 | |
| travel_speed = 100 | |
| xy_size_compensation = 0 | |
| [printer:FTECH - 2020 i3 - DEFAULT] | |
| bed_shape = 0x0,200x0,200x200,0x200 | |
| before_layer_gcode = | |
| end_gcode = G1 E-1 ; retract extruder 1mm\nM400 ; wait for buffer to clear (finish the top layer)\nM104 S0 ; turn off temperature\nG28 Y0 ; home Y axis\nG28 X0 ; home X axis\nM400 ; wait for buffer to clear (finish homing)\nM84 ; disable motors | |
| extruder_offset = 0x0 | |
| gcode_flavor = reprap | |
| layer_gcode = | |
| nozzle_diameter = 0.4 | |
| octoprint_apikey = 218D646C94D245C4BE84D70B172963E6 | |
| octoprint_host = 192.168.0.50:5000 | |
| pressure_advance = 0 | |
| retract_before_travel = 2 | |
| retract_layer_change = 0 | |
| retract_length = 0.5 | |
| retract_length_toolchange = 10 | |
| retract_lift = 0 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 60 | |
| start_gcode = G28 ; home all axes\nG29; Autolevel\nG1 Z0.05 ; move nozzle close to bed\nM109 S[first_layer_temperature] ; heat nozzle and wait until reached\nM82 ; use absolute distances for extruder\nG92 E0 ; zero the extruder position\nG1 Z0.334 ; move enough to let the ooze out\nG1 X115.350 Y5.000 F9000.000\nG1 E1.00000 F1700.000\nG1 X180.350 Y5.000 E7.75323 F648.000\nG1 X190.474 Y5.026 E7.76466\nG1 X190.500 Y5.150 E7.77609\nG1 X190.500 Y55.150 E12.27824\nG1 F1800.000 E11.27824\nM400 ; wait until we get there\nG92 E0 ; zero the extruder position | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 0 | |
| use_volumetric_e = 0 | |
| vibration_limit = 0 | |
| wipe = 0 | |
| z_offset = 0 | |
| [printer:FTECH - 2020 i3 - PETG] | |
| bed_shape = 0x0,200x0,200x200,0x200 | |
| before_layer_gcode = | |
| end_gcode = G1 E-1 ; retract extruder 1mm\nM400 ; wait for buffer to clear (finish the top layer)\nM104 S0 ; turn off temperature\nG28 Y0 ; home Y axis\nG28 X0 ; home X axis\nM400 ; wait for buffer to clear (finish homing)\nM84 ; disable motors | |
| extruder_offset = 0x0 | |
| gcode_flavor = reprap | |
| layer_gcode = | |
| nozzle_diameter = 0.4 | |
| octoprint_apikey = 218D646C94D245C4BE84D70B172963E6 | |
| octoprint_host = 192.168.0.50:5000 | |
| pressure_advance = 0 | |
| retract_before_travel = 1 | |
| retract_layer_change = 1 | |
| retract_length = 2.5 | |
| retract_length_toolchange = 10 | |
| retract_lift = 0 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 40 | |
| start_gcode = G28 ; home all axes\nG29; Autolevel\nG1 Z0.05 ; move nozzle close to bed\nM109 S[first_layer_temperature] ; heat nozzle and wait until reached\nM82 ; use absolute distances for extruder\nG92 E0 ; zero the extruder position\nG1 Z0.334 ; move enough to let the ooze out\nG1 X115.350 Y5.000 F9000.000\nG1 E1.00000 F1700.000\nG1 X180.350 Y5.000 E7.75323 F648.000\nG1 X190.474 Y5.026 E7.76466\nG1 X190.500 Y5.150 E7.77609\nG1 X190.500 Y55.150 E12.27824\nG1 F1800.000 E11.27824\nM400 ; wait until we get there\nG92 E0 ; zero the extruder position | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 0 | |
| use_volumetric_e = 0 | |
| vibration_limit = 0 | |
| wipe = 1 | |
| z_offset = 0 | |
| [printer:FTECH - 2020 i3 - PETG_2] | |
| bed_shape = 0x0,200x0,200x200,0x200 | |
| before_layer_gcode = | |
| end_gcode = G1 E-1 ; retract extruder 1mm\nM400 ; wait for buffer to clear (finish the top layer)\nM104 S0 ; turn off temperature\nG28 Y0 ; home Y axis\nG28 X0 ; home X axis\nM400 ; wait for buffer to clear (finish homing)\nM84 ; disable motors | |
| extruder_offset = 0x0 | |
| gcode_flavor = reprap | |
| layer_gcode = | |
| nozzle_diameter = 0.4 | |
| octoprint_apikey = 218D646C94D245C4BE84D70B172963E6 | |
| octoprint_host = 192.168.0.50:5000 | |
| pressure_advance = 0 | |
| retract_before_travel = 2 | |
| retract_layer_change = 0 | |
| retract_length = 1.5 | |
| retract_length_toolchange = 10 | |
| retract_lift = 0 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 60 | |
| start_gcode = G28 ; home all axes\nG29; Autolevel\nG1 Z0.05 ; move nozzle close to bed\nM109 S[first_layer_temperature] ; heat nozzle and wait until reached\nM82 ; use absolute distances for extruder\nG92 E0 ; zero the extruder position\nG1 Z0.334 ; move enough to let the ooze out\nG1 X115.350 Y5.000 F9000.000\nG1 E1.00000 F1700.000\nG1 X180.350 Y5.000 E7.75323 F648.000\nG1 X190.474 Y5.026 E7.76466\nG1 X190.500 Y5.150 E7.77609\nG1 X190.500 Y55.150 E12.27824\nG1 F1800.000 E11.27824\nM400 ; wait until we get there\nG92 E0 ; zero the extruder position | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 0 | |
| use_volumetric_e = 0 | |
| vibration_limit = 0 | |
| wipe = 0 | |
| z_offset = 0 | |
| [printer:FTECH - 2020 i3 - e3d v6] | |
| bed_shape = 0x0,200x0,200x200,0x200 | |
| before_layer_gcode = | |
| end_gcode = G1 E-1 ; retract extruder 1mm\nM400 ; wait for buffer to clear (finish the top layer)\nM104 S0 ; turn off temperature\nG28 Y0 ; home Y axis\nG28 X0 ; home X axis\nM400 ; wait for buffer to clear (finish homing)\nM84 ; disable motors | |
| extruder_offset = 0x0 | |
| gcode_flavor = reprap | |
| layer_gcode = | |
| nozzle_diameter = 0.4 | |
| octoprint_apikey = 218D646C94D245C4BE84D70B172963E6 | |
| octoprint_host = 192.168.0.50:5000 | |
| pressure_advance = 0 | |
| retract_before_travel = 2 | |
| retract_layer_change = 0 | |
| retract_length = 1 | |
| retract_length_toolchange = 10 | |
| retract_lift = 0 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 60 | |
| start_gcode = G28 ; home all axes\nG29; Autolevel\nG1 Z0.05 ; move nozzle close to bed\nM109 S[first_layer_temperature] ; heat nozzle and wait until reached\nM82 ; use absolute distances for extruder\nG92 E0 ; zero the extruder position\nG1 Z0.334 ; move enough to let the ooze out\nG1 X115.350 Y5.000 F9000.000\nG1 E1.00000 F1700.000\nG1 X180.350 Y5.000 E7.75323 F648.000\nG1 X190.474 Y5.026 E7.76466\nG1 X190.500 Y5.150 E7.77609\nG1 X190.500 Y55.150 E12.27824\nG1 F1800.000 E11.27824\nM400 ; wait until we get there\nG92 E0 ; zero the extruder position | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 0 | |
| use_volumetric_e = 0 | |
| vibration_limit = 0 | |
| wipe = 0 | |
| z_offset = 0 | |
| [printer:FTECH - 2020 i3 - e3d v6 2] | |
| bed_shape = 0x0,200x0,200x200,0x200 | |
| before_layer_gcode = | |
| end_gcode = G1 E-1 ; retract extruder 1mm\nM400 ; wait for buffer to clear (finish the top layer)\nM104 S0 ; turn off temperature\nG28 Y0 ; home Y axis\nG28 X0 ; home X axis\nM400 ; wait for buffer to clear (finish homing)\nM84 ; disable motors | |
| extruder_offset = 0x0 | |
| gcode_flavor = reprap | |
| layer_gcode = | |
| nozzle_diameter = 0.4 | |
| octoprint_apikey = 218D646C94D245C4BE84D70B172963E6 | |
| octoprint_host = 192.168.0.50:5000 | |
| pressure_advance = 0 | |
| retract_before_travel = 2 | |
| retract_layer_change = 0 | |
| retract_length = 0.5 | |
| retract_length_toolchange = 10 | |
| retract_lift = 0 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 60 | |
| start_gcode = G28 ; home all axes\nG29; Autolevel\nG1 Z0.05 ; move nozzle close to bed\nM109 S[first_layer_temperature] ; heat nozzle and wait until reached\nM82 ; use absolute distances for extruder\nG92 E0 ; zero the extruder position\nG1 Z0.334 ; move enough to let the ooze out\nG1 X115.350 Y5.000 F9000.000\nG1 E1.00000 F1700.000\nG1 X180.350 Y5.000 E7.75323 F648.000\nG1 X190.474 Y5.026 E7.76466\nG1 X190.500 Y5.150 E7.77609\nG1 X190.500 Y55.150 E12.27824\nG1 F1800.000 E11.27824\nM400 ; wait until we get there\nG92 E0 ; zero the extruder position | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 0 | |
| use_volumetric_e = 0 | |
| vibration_limit = 0 | |
| wipe = 0 | |
| z_offset = 0 | |
| [printer:FTECH - 2020 i3 - lowz] | |
| bed_shape = 0x0,200x0,200x200,0x200 | |
| before_layer_gcode = | |
| end_gcode = G1 E-1 ; retract extruder 1mm\nM400 ; wait for buffer to clear (finish the top layer)\nM104 S0 ; turn off temperature\nG28 Y0 ; home Y axis\nG28 X0 ; home X axis\nM400 ; wait for buffer to clear (finish homing)\nM84 ; disable motors | |
| extruder_offset = 0x0 | |
| gcode_flavor = reprap | |
| layer_gcode = | |
| nozzle_diameter = 0.4 | |
| octoprint_apikey = | |
| octoprint_host = | |
| pressure_advance = 0 | |
| retract_before_travel = 2 | |
| retract_layer_change = 0 | |
| retract_length = 2 | |
| retract_length_toolchange = 10 | |
| retract_lift = 0 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 40 | |
| start_gcode = G28 ; home all axes\nG29;\nG1 Z0.05 ; move nozzle close to bed\nM109 S[first_layer_temperature] ; heat nozzle and wait until reached\nM82 ; use absolute distances for extruder\nG92 E0 ; zero the extruder position\nG1 Z0.334 ; move enough to let the ooze out\nG1 X115.350 Y5.000 F9000.000\nG1 E1.00000 F1700.000\nG1 X180.350 Y5.000 E7.75323 F648.000\nG1 X190.474 Y5.026 E7.76466\nG1 X190.500 Y5.150 E7.77609\nG1 X190.500 Y55.150 E12.27824\nG1 F1800.000 E11.27824\nM400 ; wait until we get there\nG92 E0 ; zero the extruder position | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 0 | |
| use_volumetric_e = 0 | |
| vibration_limit = 0 | |
| wipe = 0 | |
| z_offset = -0.15 | |
| [printer:FTECH - 2020 i3 - retract_test] | |
| bed_shape = 0x0,200x0,200x200,0x200 | |
| before_layer_gcode = | |
| end_gcode = G1 E-1 ; retract extruder 1mm\nM400 ; wait for buffer to clear (finish the top layer)\nM104 S0 ; turn off temperature\nG28 Y0 ; home Y axis\nG28 X0 ; home X axis\nM400 ; wait for buffer to clear (finish homing)\nM84 ; disable motors | |
| extruder_offset = 0x0 | |
| gcode_flavor = reprap | |
| layer_gcode = | |
| nozzle_diameter = 0.4 | |
| octoprint_apikey = 218D646C94D245C4BE84D70B172963E6 | |
| octoprint_host = 192.168.0.50:5000 | |
| pressure_advance = 0 | |
| retract_before_travel = 2 | |
| retract_layer_change = 0 | |
| retract_length = 2 | |
| retract_length_toolchange = 10 | |
| retract_lift = 0 | |
| retract_restart_extra = 0.4 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 40 | |
| start_gcode = G28 ; home all axes\nG29; Autolevel\nG1 Z0.05 ; move nozzle close to bed\nM109 S[first_layer_temperature] ; heat nozzle and wait until reached\nM82 ; use absolute distances for extruder\nG92 E0 ; zero the extruder position\nG1 Z0.334 ; move enough to let the ooze out\nG1 X115.350 Y5.000 F9000.000\nG1 E1.00000 F1700.000\nG1 X180.350 Y5.000 E7.75323 F648.000\nG1 X190.474 Y5.026 E7.76466\nG1 X190.500 Y5.150 E7.77609\nG1 X190.500 Y55.150 E12.27824\nG1 F1800.000 E11.27824\nM400 ; wait until we get there\nG92 E0 ; zero the extruder position | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 0 | |
| use_volumetric_e = 0 | |
| vibration_limit = 0 | |
| wipe = 0 | |
| z_offset = 0 | |
| [printer:FTECH - 2020 i3 - retract_test_2] | |
| bed_shape = 0x0,200x0,200x200,0x200 | |
| before_layer_gcode = | |
| end_gcode = G1 E-1 ; retract extruder 1mm\nM400 ; wait for buffer to clear (finish the top layer)\nM104 S0 ; turn off temperature\nG28 Y0 ; home Y axis\nG28 X0 ; home X axis\nM400 ; wait for buffer to clear (finish homing)\nM84 ; disable motors | |
| extruder_offset = 0x0 | |
| gcode_flavor = reprap | |
| layer_gcode = | |
| nozzle_diameter = 0.4 | |
| octoprint_apikey = 218D646C94D245C4BE84D70B172963E6 | |
| octoprint_host = 192.168.0.50:5000 | |
| pressure_advance = 0 | |
| retract_before_travel = 2 | |
| retract_layer_change = 0 | |
| retract_length = 1.5 | |
| retract_length_toolchange = 10 | |
| retract_lift = 0 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 60 | |
| start_gcode = G28 ; home all axes\nG29; Autolevel\nG1 Z0.05 ; move nozzle close to bed\nM109 S[first_layer_temperature] ; heat nozzle and wait until reached\nM82 ; use absolute distances for extruder\nG92 E0 ; zero the extruder position\nG1 Z0.334 ; move enough to let the ooze out\nG1 X115.350 Y5.000 F9000.000\nG1 E1.00000 F1700.000\nG1 X180.350 Y5.000 E7.75323 F648.000\nG1 X190.474 Y5.026 E7.76466\nG1 X190.500 Y5.150 E7.77609\nG1 X190.500 Y55.150 E12.27824\nG1 F1800.000 E11.27824\nM400 ; wait until we get there\nG92 E0 ; zero the extruder position | |
| toolchange_gcode = | |
| use_firmware_retraction = 0 | |
| use_relative_e_distances = 0 | |
| use_volumetric_e = 0 | |
| vibration_limit = 0 | |
| wipe = 0 | |
| z_offset = 0 | |
| [settings] | |
| autocenter = 1 | |
| mode = expert | |
| [simple] | |
| avoid_crossing_perimeters = 1 | |
| bed_shape = 0x0,200x0,200x200,0x200 | |
| bed_temperature = 0 | |
| bottom_solid_layers = 3 | |
| bridge_acceleration = 0 | |
| bridge_fan_speed = 100 | |
| bridge_flow_ratio = 1 | |
| bridge_speed = 60 | |
| brim_width = 0 | |
| complete_objects = 0 | |
| cooling = 1 | |
| default_acceleration = 0 | |
| disable_fan_first_layers = 1 | |
| duplicate_distance = 6 | |
| end_gcode = M104 S0 ; turn off temperature\nG28 X0 ; home X axis\nM84 ; disable motors | |
| external_fill_pattern = rectilinear | |
| external_perimeter_speed = 70% | |
| external_perimeters_first = 0 | |
| extra_perimeters = 1 | |
| extruder_clearance_height = 20 | |
| extruder_clearance_radius = 20 | |
| extruder_offset = 0x0 | |
| extrusion_axis = E | |
| extrusion_multiplier = 1 | |
| extrusion_width = 0 | |
| fan_always_on = 0 | |
| fan_below_layer_time = 60 | |
| filament_diameter = 3 | |
| fill_angle = 45 | |
| fill_density = 40% | |
| fill_pattern = honeycomb | |
| first_layer_bed_temperature = 5 | |
| first_layer_extrusion_width = 200% | |
| first_layer_height = 0.5 | |
| first_layer_speed = 30% | |
| first_layer_temperature = 205 | |
| gap_fill_speed = 20 | |
| gcode_arcs = 0 | |
| gcode_comments = 0 | |
| gcode_flavor = reprap | |
| infill_acceleration = 0 | |
| infill_every_layers = 10 | |
| infill_extruder = 1 | |
| infill_extrusion_width = 0 | |
| infill_first = 0 | |
| infill_only_where_needed = 0 | |
| infill_speed = 60 | |
| layer_gcode = | |
| layer_height = 0.4 | |
| max_fan_speed = 100 | |
| min_fan_speed = 35 | |
| min_print_speed = 10 | |
| min_skirt_length = 0 | |
| notes = | |
| nozzle_diameter = 0.5 | |
| only_retract_when_crossing_perimeters = 1 | |
| output_filename_format = [input_filename_base].gcode | |
| perimeter_acceleration = 0 | |
| perimeter_extruder = 1 | |
| perimeter_extrusion_width = 0 | |
| perimeter_speed = 30 | |
| perimeters = 3 | |
| post_process = | |
| raft_layers = 0 | |
| resolution = 0 | |
| retract_before_travel = 2 | |
| retract_layer_change = 1 | |
| retract_length = 1 | |
| retract_length_toolchange = 10 | |
| retract_lift = 0 | |
| retract_restart_extra = 0 | |
| retract_restart_extra_toolchange = 0 | |
| retract_speed = 30 | |
| skirt_distance = 6 | |
| skirt_height = 1 | |
| skirts = 1 | |
| slowdown_below_layer_time = 30 | |
| small_perimeter_speed = 30 | |
| solid_infill_below_area = 70 | |
| solid_infill_every_layers = 0 | |
| solid_infill_extrusion_width = 0 | |
| solid_infill_speed = 60 | |
| spiral_vase = 0 | |
| start_gcode = G28 ; home all axes\nG1 Z5 F5000 ; lift nozzle | |
| support_material = 0 | |
| support_material_angle = 0 | |
| support_material_enforce_layers = 0 | |
| support_material_extruder = 1 | |
| support_material_extrusion_width = 0 | |
| support_material_interface_layers = 0 | |
| support_material_interface_spacing = 0 | |
| support_material_pattern = rectilinear | |
| support_material_spacing = 2.5 | |
| support_material_speed = 60 | |
| support_material_threshold = 0 | |
| temperature = 200 | |
| threads = 2 | |
| toolchange_gcode = | |
| top_infill_extrusion_width = 0 | |
| top_solid_infill_speed = 50 | |
| top_solid_layers = 3 | |
| travel_speed = 130 | |
| use_relative_e_distances = 0 | |
| vibration_limit = 0 | |
| wipe = 0 | |
| z_offset = 0 |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment