Skip to content

Instantly share code, notes, and snippets.

@jitomesky
Created April 12, 2014 17:16
Show Gist options
  • Save jitomesky/10546547 to your computer and use it in GitHub Desktop.
Save jitomesky/10546547 to your computer and use it in GitHub Desktop.
debian_7.4 dmesg
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.2.0-4-486 (debian-kernel@lists.debian.org) (gcc version 4.6.3 (Debian 4.6.3-14) ) #1 Debian 3.2.54-2
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000001fff0000 (usable)
[ 0.000000] BIOS-e820: 000000001fff0000 - 0000000020000000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000fffc0000 - 0000000100000000 (reserved)
[ 0.000000] Notice: NX (Execute Disable) protection missing in CPU!
[ 0.000000] SMBIOS 2.5 present.
[ 0.000000] DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x1fff0 max_arch_pfn = 0x100000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR variable ranges disabled:
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] CPU MTRRs all blank - virtualized system.
[ 0.000000] initial memory mapped : 0 - 01800000
[ 0.000000] Base memory trampoline at [c009c000] 9c000 size 12288
[ 0.000000] init_memory_mapping: 0000000000000000-000000001fff0000
[ 0.000000] 0000000000 - 0000400000 page 4k
[ 0.000000] 0000400000 - 001fc00000 page 2M
[ 0.000000] 001fc00000 - 001fff0000 page 4k
[ 0.000000] kernel direct mapping tables up to 1fff0000 @ 17f8000-1800000
[ 0.000000] RAMDISK: 1ef1a000 - 1f867000
[ 0.000000] ACPI: RSDP 000e0000 00024 (v02 VBOX )
[ 0.000000] ACPI: XSDT 1fff0030 00034 (v01 VBOX VBOXXSDT 00000001 ASL 00000061)
[ 0.000000] ACPI: FACP 1fff00f0 000F4 (v04 VBOX VBOXFACP 00000001 ASL 00000061)
[ 0.000000] ACPI: DSDT 1fff0410 01B96 (v01 VBOX VBOXBIOS 00000002 INTL 20100528)
[ 0.000000] ACPI: FACS 1fff0200 00040
[ 0.000000] ACPI: SSDT 1fff0240 001CC (v01 VBOX VBOXCPUT 00000002 INTL 20100528)
[ 0.000000] 0MB HIGHMEM available.
[ 0.000000] 511MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 1fff0000
[ 0.000000] low ram: 0 - 1fff0000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x0001fff0
[ 0.000000] HighMem empty
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[2] active PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x0001fff0
[ 0.000000] On node 0 totalpages: 130943
[ 0.000000] free_area_init_node: node 0, pgdat c13c5a88, node_mem_map dfbef200
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3951 pages, LIFO batch:0
[ 0.000000] Normal zone: 992 pages used for memmap
[ 0.000000] Normal zone: 125968 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x4008
[ 0.000000] Found and enabled local APIC!
[ 0.000000] nr_irqs_gsi: 16
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000f0000
[ 0.000000] PM: Registered nosave memory: 00000000000f0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at 20000000 (gap: 20000000:dffc0000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[ 0.000000] pcpu-alloc: [0] 0
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 129919
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-4-486 root=UUID=968aa34c-96cd-4722-8e19-105682143c6b ro quiet
[ 0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[ 0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Initializing CPU#0
[ 0.000000] Initializing HighMem for node 0 (00000000:00000000)
[ 0.000000] Memory: 504820k/524224k available (2599k kernel code, 18952k reserved, 1290k data, 456k init, 0k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfffa1000 - 0xfffff000 ( 376 kB)
[ 0.000000] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 0.000000] vmalloc : 0xe07f0000 - 0xff7fe000 ( 496 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xdfff0000 ( 511 MB)
[ 0.000000] .init : 0xc13cd000 - 0xc143f000 ( 456 kB)
[ 0.000000] .data : 0xc1289e2c - 0xc13cc6c0 (1290 kB)
[ 0.000000] .text : 0xc1000000 - 0xc1289e2c (2599 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] NR_IRQS:2304 nr_irqs:256 16
[ 0.000000] CPU 0 irqstacks, hard=de806000 soft=de808000
[ 0.000000] Console: colour VGA+ 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] Fast TSC calibration failed
[ 0.000000] TSC: Unable to calibrate against PIT
[ 0.000000] TSC: using PMTIMER reference calibration
[ 0.000000] Detected 1803.505 MHz processor.
[ 0.016002] Calibrating delay loop (skipped), value calculated using timer frequency.. 3607.01 BogoMIPS (lpj=7214020)
[ 0.016005] pid_max: default: 32768 minimum: 301
[ 0.016029] Security Framework initialized
[ 0.016033] AppArmor: AppArmor disabled by boot time parameter
[ 0.016039] Mount-cache hash table entries: 512
[ 0.016092] Initializing cgroup subsys cpuacct
[ 0.016095] Initializing cgroup subsys memory
[ 0.016099] Initializing cgroup subsys devices
[ 0.016101] Initializing cgroup subsys freezer
[ 0.016102] Initializing cgroup subsys net_cls
[ 0.016103] Initializing cgroup subsys blkio
[ 0.016106] Initializing cgroup subsys perf_event
[ 0.016185] using mwait in idle threads.
[ 0.016188] CPU: Intel(R) Core(TM) i7-2677M CPU @ 1.80GHz stepping 07
[ 0.018118] ACPI: Core revision 20110623
[ 0.020306] ACPI: setting ELCR to 0200 (from 0e00)
[ 0.020360] Performance Events: unsupported p6 CPU model 42 no PMU driver, software events only.
[ 0.020402] NMI watchdog disabled (cpu0): hardware events not enabled
[ 0.020409] Enabling APIC mode: Flat. Using 0 I/O APICs
[ 0.024001] devtmpfs: initialized
[ 0.024001] print_constraints: dummy:
[ 0.024001] NET: Registered protocol family 16
[ 0.024001] EISA bus registered
[ 0.024001] ACPI: bus type pci registered
[ 0.024001] PCI: PCI BIOS revision 2.10 entry at 0xfda26, last bus=0
[ 0.024001] PCI: Using configuration type 1 for base access
[ 0.024001] bio: create slab <bio-0> at 0
[ 0.024001] ACPI: Added _OSI(Module Device)
[ 0.024001] ACPI: Added _OSI(Processor Device)
[ 0.024001] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.024001] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.024001] ACPI: EC: Look up EC in DSDT
[ 0.024001] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.024001] ACPI: Interpreter enabled
[ 0.024001] ACPI: (supports S0 S5)
[ 0.024001] ACPI: Using PIC for interrupt routing
[ 0.026994] ACPI: No dock devices found.
[ 0.026997] HEST: Table not found.
[ 0.027001] PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
[ 0.027054] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.027159] pci_root PNP0A03:00: host bridge window [io 0x0000-0x0cf7] (ignored)
[ 0.027161] pci_root PNP0A03:00: host bridge window [io 0x0d00-0xffff] (ignored)
[ 0.027163] pci_root PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
[ 0.027165] pci_root PNP0A03:00: host bridge window [mem 0x20000000-0xffdfffff] (ignored)
[ 0.027211] pci 0000:00:00.0: [8086:1237] type 0 class 0x000600
[ 0.027599] pci 0000:00:01.0: [8086:7000] type 0 class 0x000601
[ 0.028230] pci 0000:00:01.1: [8086:7111] type 0 class 0x000101
[ 0.028611] pci 0000:00:01.1: reg 20: [io 0xd000-0xd00f]
[ 0.028877] pci 0000:00:02.0: [80ee:beef] type 0 class 0x000300
[ 0.029578] pci 0000:00:02.0: reg 10: [mem 0xe0000000-0xe0ffffff pref]
[ 0.033019] pci 0000:00:03.0: [8086:100e] type 0 class 0x000200
[ 0.033329] pci 0000:00:03.0: reg 10: [mem 0xf0000000-0xf001ffff]
[ 0.033778] pci 0000:00:03.0: reg 18: [io 0xd010-0xd017]
[ 0.034997] pci 0000:00:04.0: [80ee:cafe] type 0 class 0x000880
[ 0.035304] pci 0000:00:04.0: reg 10: [io 0xd020-0xd03f]
[ 0.035559] pci 0000:00:04.0: reg 14: [mem 0xf0400000-0xf07fffff]
[ 0.035812] pci 0000:00:04.0: reg 18: [mem 0xf0800000-0xf0803fff pref]
[ 0.036895] pci 0000:00:05.0: [8086:2415] type 0 class 0x000401
[ 0.036989] pci 0000:00:05.0: reg 10: [io 0xd100-0xd1ff]
[ 0.037057] pci 0000:00:05.0: reg 14: [io 0xd200-0xd23f]
[ 0.037510] pci 0000:00:06.0: [106b:003f] type 0 class 0x000c03
[ 0.037778] pci 0000:00:06.0: reg 10: [mem 0xf0804000-0xf0804fff]
[ 0.039190] pci 0000:00:07.0: [8086:7113] type 0 class 0x000680
[ 0.039908] pci 0000:00:0b.0: [8086:265c] type 0 class 0x000c03
[ 0.040242] pci 0000:00:0b.0: reg 10: [mem 0xf0805000-0xf0805fff]
[ 0.041650] pci 0000:00:0d.0: [8086:2829] type 0 class 0x000106
[ 0.041962] pci 0000:00:0d.0: reg 10: [io 0xd240-0xd247]
[ 0.042420] pci 0000:00:0d.0: reg 18: [io 0xd250-0xd257]
[ 0.042878] pci 0000:00:0d.0: reg 20: [io 0xd260-0xd26f]
[ 0.043122] pci 0000:00:0d.0: reg 24: [mem 0xf0806000-0xf0807fff]
[ 0.043735] pci_bus 0000:00: on NUMA node 0
[ 0.043757] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.044511] pci0000:00: Unable to request _OSC control (_OSC support mask: 0x1e)
[ 0.057137] ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
[ 0.057339] ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
[ 0.057410] ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
[ 0.057479] ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
[ 0.057605] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.057609] vgaarb: loaded
[ 0.057610] vgaarb: bridge control possible 0000:00:02.0
[ 0.057653] PCI: Using ACPI for IRQ routing
[ 0.057655] PCI: pci_cache_line_size set to 64 bytes
[ 0.057887] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.057889] reserve RAM buffer: 000000001fff0000 - 000000001fffffff
[ 0.058799] pnp: PnP ACPI init
[ 0.058809] ACPI: bus type pnp registered
[ 0.058859] pnp 00:00: [bus 00-ff]
[ 0.058861] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.058863] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.058864] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.058866] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.058868] pnp 00:00: [mem 0x20000000-0xffdfffff window]
[ 0.058889] pnp 00:00: Plug and Play ACPI device, IDs PNP0a03 (active)
[ 0.058902] pnp 00:01: [io 0x0060]
[ 0.058903] pnp 00:01: [io 0x0064]
[ 0.058905] pnp 00:01: [irq 1]
[ 0.058922] pnp 00:01: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.058929] pnp 00:02: [io 0x0000-0x000f]
[ 0.058930] pnp 00:02: [io 0x0080-0x008f]
[ 0.058931] pnp 00:02: [io 0x00c0-0x00df]
[ 0.058933] pnp 00:02: [dma 4]
[ 0.058949] pnp 00:02: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.058985] pnp 00:03: [irq 12]
[ 0.059009] pnp 00:03: Plug and Play ACPI device, IDs PNP0f03 (active)
[ 0.059019] pnp 00:04: [io 0x0378-0x037f]
[ 0.059021] pnp 00:04: [io 0x0778-0x077f]
[ 0.059022] pnp 00:04: [irq 7]
[ 0.059037] pnp 00:04: Plug and Play ACPI device, IDs PNP0400 (active)
[ 0.060003] pnp: PnP ACPI: found 5 devices
[ 0.060003] ACPI: ACPI bus type pnp unregistered
[ 0.060003] PnPBIOS: Disabled by ACPI PNP
[ 0.096098] Switching to clocksource acpi_pm
[ 0.096109] PCI: max bus depth: 0 pci_try_num: 1
[ 0.096114] pci_bus 0000:00: resource 0 [io 0x0000-0xffff]
[ 0.096116] pci_bus 0000:00: resource 1 [mem 0x00000000-0xffffffff]
[ 0.096135] NET: Registered protocol family 2
[ 0.096170] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.096254] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.096286] TCP bind hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.096300] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.096301] TCP reno registered
[ 0.096303] UDP hash table entries: 256 (order: 0, 4096 bytes)
[ 0.096305] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[ 0.096332] NET: Registered protocol family 1
[ 0.096338] pci 0000:00:00.0: Limiting direct PCI/PCI transfers
[ 0.096365] pci 0000:00:01.0: Activating ISA DMA hang workarounds
[ 0.096395] pci 0000:00:02.0: Boot video device
[ 0.096672] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 11
[ 0.096674] PCI: setting IRQ 11 as level-triggered
[ 0.154017] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 10
[ 0.154023] PCI: setting IRQ 10 as level-triggered
[ 0.154185] PCI: CLS 64 bytes, default 64
[ 0.154263] Unpacking initramfs...
[ 0.353780] Freeing initrd memory: 9524k freed
[ 0.354971] platform rtc_cmos: registered platform RTC device (no PNP device found)
[ 0.355115] audit: initializing netlink socket (disabled)
[ 0.355124] type=2000 audit(1397316447.352:1): initialized
[ 0.367077] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.367134] VFS: Disk quotas dquot_6.5.2
[ 0.367143] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.367174] msgmni has been set to 1004
[ 0.367272] alg: No test for stdrng (krng)
[ 0.367286] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.367288] io scheduler noop registered
[ 0.367289] io scheduler deadline registered
[ 0.367293] io scheduler cfq registered (default)
[ 0.367346] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.367360] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.367361] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.367544] ERST: Table is not found!
[ 0.367545] GHES: HEST is not enabled!
[ 0.367553] isapnp: Scanning for PnP cards...
[ 0.732800] isapnp: No Plug & Play device found
[ 0.732869] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.733197] Linux agpgart interface v0.103
[ 0.733344] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 0.734105] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.734110] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.734183] mousedev: PS/2 mouse device common for all mice
[ 0.734590] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 0.734956] rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
[ 0.734982] rtc0: alarms up to one day, 114 bytes nvram
[ 0.735003] EISA: Probing bus 0 at eisa.0
[ 0.735021] Cannot allocate resource for EISA slot 4
[ 0.735039] EISA: Detected 0 cards.
[ 0.735041] cpuidle: using governor ladder
[ 0.735042] cpuidle: using governor menu
[ 0.735137] TCP cubic registered
[ 0.735149] NET: Registered protocol family 10
[ 0.735368] Mobile IPv6
[ 0.735370] NET: Registered protocol family 17
[ 0.735372] Registering the dns_resolver key type
[ 0.735381] Using IPI Shortcut mode
[ 0.735434] PM: Hibernation image not present or could not be loaded.
[ 0.735440] registered taskstats version 1
[ 0.735819] rtc_cmos rtc_cmos: setting system clock to 2014-04-12 15:27:28 UTC (1397316448)
[ 0.735841] Initializing network drop monitor service
[ 0.735902] Freeing unused kernel memory: 456k freed
[ 0.735975] Write protecting the kernel text: 2600k
[ 0.735989] Write protecting the kernel read-only data: 1032k
[ 0.745255] udevd[41]: starting version 175
[ 0.758760] SCSI subsystem initialized
[ 0.762189] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 0.762191] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 0.783072] usbcore: registered new interface driver usbfs
[ 0.783087] usbcore: registered new interface driver hub
[ 0.785378] libata version 3.00 loaded.
[ 0.787905] usbcore: registered new device driver usb
[ 1.085653] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.126413] e1000 0000:00:03.0: eth0: (PCI:33MHz:32-bit) 08:00:27:8d:b0:d9
[ 1.126420] e1000 0000:00:03.0: eth0: Intel(R) PRO/1000 Network Connection
[ 1.126438] ahci 0000:00:0d.0: version 3.0
[ 1.127058] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
[ 1.127182] ahci: SSS flag set, parallel bus scan disabled
[ 1.127330] ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
[ 1.127333] ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc
[ 1.128228] scsi0 : ahci
[ 1.128289] ata1: SATA max UDMA/133 abar m8192@0xf0806000 port 0xf0806100 irq 11
[ 1.128427] ehci_hcd 0000:00:0b.0: EHCI Host Controller
[ 1.128440] ehci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 1.128551] ehci_hcd 0000:00:0b.0: irq 10, io mem 0xf0805000
[ 1.140139] ehci_hcd 0000:00:0b.0: USB 2.0 started, EHCI 1.00
[ 1.140168] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.140170] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.140172] usb usb1: Product: EHCI Host Controller
[ 1.140173] usb usb1: Manufacturer: Linux 3.2.0-4-486 ehci_hcd
[ 1.140174] usb usb1: SerialNumber: 0000:00:0b.0
[ 1.140284] hub 1-0:1.0: USB hub found
[ 1.140287] hub 1-0:1.0: 8 ports detected
[ 1.140515] ata_piix 0000:00:01.1: version 2.13
[ 1.142061] scsi1 : ata_piix
[ 1.142852] scsi2 : ata_piix
[ 1.142852] ata2: PATA max UDMA/33 cmd 0x1f0 ctl 0x3f6 bmdma 0xd000 irq 14
[ 1.142852] ata3: PATA max UDMA/33 cmd 0x170 ctl 0x376 bmdma 0xd008 irq 15
[ 1.296570] ata3.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
[ 1.296972] ata3.00: configured for UDMA/33
[ 1.364884] Refined TSC clocksource calibration: 1803.539 MHz.
[ 1.364893] Switching to clocksource tsc
[ 1.449315] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.449543] ata1.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
[ 1.449548] ata1.00: 60817376 sectors, multi 128: LBA48 NCQ (depth 31/32)
[ 1.449915] ata1.00: configured for UDMA/133
[ 1.450033] scsi 0:0:0:0: Direct-Access ATA VBOX HARDDISK 1.0 PQ: 0 ANSI: 5
[ 1.450882] scsi 2:0:0:0: CD-ROM VBOX CD-ROM 1.0 PQ: 0 ANSI: 5
[ 1.452153] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.452206] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 1.452220] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 2
[ 1.452261] ohci_hcd 0000:00:06.0: irq 11, io mem 0xf0804000
[ 1.458137] sd 0:0:0:0: [sda] 60817376 512-byte logical blocks: (31.1 GB/28.9 GiB)
[ 1.458167] sd 0:0:0:0: [sda] Write Protect is off
[ 1.458169] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.458181] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.461177] sda: sda1 sda2 < sda5 >
[ 1.461530] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.462879] sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
[ 1.462882] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.463131] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.464719] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.464770] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.508343] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.508346] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.508348] usb usb2: Product: OHCI Host Controller
[ 1.508349] usb usb2: Manufacturer: Linux 3.2.0-4-486 ohci_hcd
[ 1.508350] usb usb2: SerialNumber: 0000:00:06.0
[ 1.508441] hub 2-0:1.0: USB hub found
[ 1.508452] hub 2-0:1.0: 8 ports detected
[ 1.571442] PM: Starting manual resume from disk
[ 1.571445] PM: Hibernation image partition 8:5 present
[ 1.571446] PM: Looking for hibernation image.
[ 1.572452] PM: Image not found (code -22)
[ 1.572455] PM: Hibernation image not present or could not be loaded.
[ 1.584021] EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
[ 1.916133] usb 2-1: new full-speed USB device number 2 using ohci_hcd
[ 1.943199] udevd[281]: starting version 175
[ 2.018069] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[ 2.018073] ACPI: Power Button [PWRF]
[ 2.018114] input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input2
[ 2.018116] ACPI: Sleep Button [SLPF]
[ 2.039136] piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
[ 2.045725] input: PC Speaker as /devices/platform/pcspkr/input/input3
[ 2.054845] ACPI: AC Adapter [AC] (off-line)
[ 2.063647] ACPI: Battery Slot [BAT0] (battery present)
[ 2.086238] parport_pc 00:04: reported by Plug and Play ACPI
[ 2.162844] usb 2-1: New USB device found, idVendor=80ee, idProduct=0021
[ 2.162847] usb 2-1: New USB device strings: Mfr=1, Product=3, SerialNumber=0
[ 2.162849] usb 2-1: Product: USB Tablet
[ 2.162850] usb 2-1: Manufacturer: VirtualBox
[ 2.167739] Error: Driver 'pcspkr' is already registered, aborting...
[ 2.186465] input: VirtualBox USB Tablet as /devices/pci0000:00/0000:00:06.0/usb2/2-1/2-1:1.0/input/input4
[ 2.186592] generic-usb 0003:80EE:0021.0001: input,hidraw0: USB HID v1.10 Mouse [VirtualBox USB Tablet] on usb-0000:00:06.0-1/input0
[ 2.186728] usbcore: registered new interface driver usbhid
[ 2.186730] usbhid: USB HID core driver
[ 2.258693] psmouse serio1: hgpk: ID: 10 00 64
[ 2.263921] input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5
[ 2.493200] intel8x0_measure_ac97_clock: measured 55408 usecs (1671 samples)
[ 2.493202] intel8x0: measured clock 30158 rejected
[ 2.852334] intel8x0_measure_ac97_clock: measured 55561 usecs (3900 samples)
[ 2.852340] intel8x0: measured clock 70193 rejected
[ 3.212531] intel8x0_measure_ac97_clock: measured 55887 usecs (3900 samples)
[ 3.212537] intel8x0: measured clock 69783 rejected
[ 3.212540] intel8x0: clocking to 48000
[ 3.907596] Adding 1045500k swap on /dev/sda5. Priority:-1 extents:1 across:1045500k
[ 3.916184] EXT4-fs (sda1): re-mounted. Opts: (null)
[ 3.992499] EXT4-fs (sda1): re-mounted. Opts: errors=remount-ro
[ 4.049614] loop: module loaded
[ 4.748375] RPC: Registered named UNIX socket transport module.
[ 4.748377] RPC: Registered udp transport module.
[ 4.748379] RPC: Registered tcp transport module.
[ 4.748380] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 4.757060] FS-Cache: Loaded
[ 4.768529] FS-Cache: Netfs 'nfs' registered for caching
[ 4.774922] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 5.238556] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 5.242493] e1000: eth0 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: RX
[ 5.242928] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 6.407643] Bluetooth: Core ver 2.16
[ 6.407655] NET: Registered protocol family 31
[ 6.407657] Bluetooth: HCI device and connection manager initialized
[ 6.407659] Bluetooth: HCI socket layer initialized
[ 6.407660] Bluetooth: L2CAP socket layer initialized
[ 6.407783] Bluetooth: SCO socket layer initialized
[ 6.411707] Bluetooth: RFCOMM TTY layer initialized
[ 6.411710] Bluetooth: RFCOMM socket layer initialized
[ 6.411712] Bluetooth: RFCOMM ver 1.11
[ 6.419035] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 6.419038] Bluetooth: BNEP filters: protocol multicast
[ 6.496773] lp: driver loaded but no devices found
[ 6.502100] ppdev: user-space parallel port driver
[ 6.690605] input: ACPI Virtual Keyboard Device as /devices/virtual/input/input6
[ 15.793264] eth0: no IPv6 routers present
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment