OpenOCD target config file for Raspberry Pi 2
| # ref: http://www.raspberrypi.org/forums/viewtopic.php?f=72&t=100268 | |
| # : http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.ddi0464f/ch10s06s01.html | |
| adapter_khz 1000 | |
| adapter_nsrst_delay 400 | |
| reset_config none | |
| if { [info exists CHIPNAME] } { | |
| set _CHIPNAME $CHIPNAME | |
| } else { | |
| set _CHIPNAME rpi2 | |
| } | |
| # | |
| # Main DAP | |
| # | |
| if { [info exists DAP_TAPID] } { | |
| set _DAP_TAPID $DAP_TAPID | |
| } else { | |
| set _DAP_TAPID 0x4ba00477 | |
| } | |
| jtag newtap $_CHIPNAME dap -irlen 4 -ircapture 0x01 -irmask 0xf -expected-id $_DAP_TAPID | |
| set _TARGETNAME $_CHIPNAME.cpu.0 | |
| target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap -coreid 0 -dbgbase 0x80010000 | |
| set _TARGETNAME $_CHIPNAME.cpu.1 | |
| target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap -coreid 1 -dbgbase 0x80012000 | |
| set _TARGETNAME $_CHIPNAME.cpu.2 | |
| target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap -coreid 2 -dbgbase 0x80014000 | |
| set _TARGETNAME $_CHIPNAME.cpu.3 | |
| target create $_TARGETNAME cortex_a -chain-position $_CHIPNAME.dap -coreid 3 -dbgbase 0x80016000 | |
| $_TARGETNAME configure -event reset-assert-post "cortex_a dbginit" | |
| $_TARGETNAME configure -event gdb-attach { halt } |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment