Skip to content

Instantly share code, notes, and snippets.

@jkachmar
Last active September 19, 2016 14:14
Show Gist options
  • Save jkachmar/e4328d879f4b39f3f79eca9ab74e9b91 to your computer and use it in GitHub Desktop.
Save jkachmar/e4328d879f4b39f3f79eca9ab74e9b91 to your computer and use it in GitHub Desktop.
TTN OTAA Test w/ Multitech mDot
#include "mbed.h"
#include "mDot.h"
#include "MTSLog.h"
#include <string>
#include <vector>
#define SLEEPTIME 5*60*1000
static uint8_t config_appEui[] = { <appEUI> };
static uint8_t config_appKey[] = { <appKey> };
static uint8_t config_frequency_sub_band = 2;
std::vector<uint8_t> data;
mDot* dot;
void setupNetwork();
int main() {
setupNetwork();
int32_t ret;
float _temperature = 73.45;
uint32_t temperature = (_temperature * 1000000);
uint8_t tByteArr[4];
for (int i = 0; i < 4; i++) {
tByteArr[i] = (temperature >> (i * 8));
}
// push 1 byte chunks of 'temperature' into a byte vector
for (int i = 0; i < 4; i++) {
data.push_back(tByteArr[i]);
}
// Send the data
if ((ret = dot->send(data)) != mDot::MDOT_OK) {
// Oops, there was an error, check the debug screent
logError("Failed to send", ret, mDot::getReturnCodeString(ret).c_str());
} else {
// Sent the data
logInfo("Successfully sent data");
}
// Enter deep sleep
uint32_t sleep_time = SLEEPTIME;
sleep_time = sleep_time / 1000;
dot->sleep(sleep_time, dot->RTC_ALARM, true);
}
void setupNetwork() {
int32_t ret;
// get a mDot handle
dot = mDot::getInstance();
// print library version information
logInfo("Version: %s", dot->getId().c_str());
// reset to default config so we know what state we're in
dot->resetConfig();
dot->setLogLevel(mts::MTSLog::INFO_LEVEL);
//joinmode: [MANUAL = ABP]/[OTA]/[AUTO_OTA]
dot->setJoinMode(mDot::AUTO_OTA);
// set up the mDot with our network information: frequency sub band, network name, and network password
// these can all be saved in NVM so they don't need to be set every time - see mDot::saveConfig()
// frequency sub band is only applicable in the 915 (US) frequency band
logInfo("Setting frequency sub band");
if ((ret = dot->setFrequencySubBand(config_frequency_sub_band)) != mDot::MDOT_OK) {
logError("Failed to set frequency sub band %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
}
std::vector<uint8_t> temp;
if ((ret = dot->setPublicNetwork(true)) != mDot::MDOT_OK) {
logError("Failed to enable public network %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
}
for (int i = 0; i < 8; i++) {
temp.push_back(config_appEui[i]);
}
logInfo("setting App EUI ");
if ((ret = dot->setNetworkId(temp)) != mDot::MDOT_OK) {
logError("failed to set App EUI %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
}
temp.clear();
for (int i = 0; i < 16; i++) {
temp.push_back(config_appKey[i]);
}
logInfo("setting App Key ");
if ((ret = dot->setNetworkKey(temp)) != mDot::MDOT_OK) {
logError("failed to set AppKey %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
}
// a higher spreading factor allows for longer range but lower throughput
// in the 915 (US) frequency band, spreading factors 7 - 10 are available
logInfo("Setting TX spreading factor");
if ((ret = dot->setTxDataRate(mDot::SF_7)) != mDot::MDOT_OK) {
logError("Failed to set TX datarate %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
}
// request receive confirmation of packets from the gateway
logInfo("Disabling ACKs");
if ((ret = dot->setAck(0)) != mDot::MDOT_OK) {
logError("Failed to enable ACKs %d:%s", ret, mDot::getReturnCodeString(ret).c_str());
}
// save this configuration to the mDot's NVM
logInfo("Saving config");
if (! dot->saveConfig()) {
logError("Failed to save configuration");
}
logInfo("Joining Network");
while ((ret = dot->joinNetwork()) != mDot::MDOT_OK) {
logError("failed to join network [%d][%s]", ret, mDot::getReturnCodeString(ret).c_str());
wait_ms(100);
}
logInfo("Joined Network");
}
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment