ANOPP2.err

FILE: ObserverResultClass.f03, LINE: 9950
  Arrays that should be the same size are not.
  Size of number of segments not equal to the number of nodes.

Observer.static.config

!--------------------------------------------------------------------------------------
! The observer is defined here as a curved line of nodes (structured). The input file
! defines the number of frame changes and the surface definition. For this example,
! the line is a structured mesh of 21 node points organized as a circular arc that is
! moving at 68.6 m/s in the x direction.
!---------------------------------------------------------------------------------------
&ObserverPointCloudNamelist

  ! This is the number of frame changes from the ground frame to the frame of reference
  ! where the line is defined. For this example, the frame change will be a constant
  ! velocity of 68.6 m/s.
  nFrameChanges = 0

/
  &PointCloudNamelist
    ! This is the coordinate type of the location of the observer. Options are
    ! SPHERICAL and CARTESIAN. In Cartesian coordinates the location is the X, Y, Z
    ! location of the observer in the observer frame. In spherical, it is the THETA,
    ! PHI, R position.
    strCoordinateType = "CARTESIAN"

    ! The units of the length parameters in the location vector of the observer.
    ! This includes X, Y, and Z when the coordinate type is Cartesian and R when the
    ! coordinate type is spherical. Options are ’METER’, ’FEET’, and ’INCHES’. See
    ! User’s Manual for other options.
    strLengthUnitType = "FEET"

    nNodes = 23
  /
    91.7263344563119,     -37.246202050797194,  0
    84.59142418314794,    -51.43239207607143,   0
    78.85646188439543,    -59.855312371375106,  0
    67.01072099858342,    -72.8736116248537,    0
    59.44160230726253,    -79.16878119022196,   0
    47.844955942245235,   -86.67098817300177,   0
    36.12280164942436,    -92.1745257703903,    0
    25.122036513895765,   -95.7595075248118,    0
    12.236546197308767,   -98.24086185066338,   0
    0.0,                  -99.0,                0
    -12.407990122866133,  -98.2193554301333,    0
    -23.446976460496245,  -96.18336287976697,   0
    -35.31706193264291,   -92.48624295778193,   0
    -47.69361373606982,   -86.75436132434248,   0
    -59.164889550576596,  -79.37578878013164,   0
    -68.5221742131703,    -71.45426258173784,   0
    -77.04607170407607,   -62.16834270728445,   0
    -85.56320539341677,   -49.79897471639325,   0
    -90.51114156819212,   -40.10901709120638,   0
    132.86834808565155,   -80.78522189726371,   0
    42.29571209157397,    -25.716196038035715,  0
    -0.21554542680983224, -24.69905949968503,   0
    -170.95231902014075,  -99.8964695153739,    0
    

The above code now runs as expected with 1.1.1; however, now I am getting a 'not implemented' error because the metric is a2_aa_octave. Is that the metric you are working with?