Skip to content

Instantly share code, notes, and snippets.

@jkreps
Last active January 21, 2024 11:02
Show Gist options
  • Save jkreps/c7ddb4041ef62a900e6c to your computer and use it in GitHub Desktop.
Save jkreps/c7ddb4041ef62a900e6c to your computer and use it in GitHub Desktop.
Kafka Benchmark Commands
Producer
Setup
bin/kafka-topics.sh --zookeeper esv4-hcl197.grid.linkedin.com:2181 --create --topic test-rep-one --partitions 6 --replication-factor 1
bin/kafka-topics.sh --zookeeper esv4-hcl197.grid.linkedin.com:2181 --create --topic test --partitions 6 --replication-factor 3
Single thread, no replication
bin/kafka-run-class.sh org.apache.kafka.clients.tools.ProducerPerformance test7 50000000 100 -1 acks=1 bootstrap.servers=esv4-hcl198.grid.linkedin.com:9092 buffer.memory=67108864 batch.size=8196
Single-thread, async 3x replication
bin/kafktopics.sh --zookeeper esv4-hcl197.grid.linkedin.com:2181 --create --topic test --partitions 6 --replication-factor 3
bin/kafka-run-class.sh org.apache.kafka.clients.tools.ProducerPerformance test6 50000000 100 -1 acks=1 bootstrap.servers=esv4-hcl198.grid.linkedin.com:9092 buffer.memory=67108864 batch.size=8196
Single-thread, sync 3x replication
bin/kafka-run-class.sh org.apache.kafka.clients.tools.ProducerPerformance test 50000000 100 -1 acks=-1 bootstrap.servers=esv4-hcl198.grid.linkedin.com:9092 buffer.memory=67108864 batch.size=64000
Three Producers, 3x async replication
bin/kafka-run-class.sh org.apache.kafka.clients.tools.ProducerPerformance test 50000000 100 -1 acks=1 bootstrap.servers=esv4-hcl198.grid.linkedin.com:9092 buffer.memory=67108864 batch.size=8196
Throughput Versus Stored Data
bin/kafka-run-class.sh org.apache.kafka.clients.tools.ProducerPerformance test 50000000000 100 -1 acks=1 bootstrap.servers=esv4-hcl198.grid.linkedin.com:9092 buffer.memory=67108864 batch.size=8196
Effect of message size
for i in 10 100 1000 10000 100000;
do
echo ""
echo $i
bin/kafka-run-class.sh org.apache.kafka.clients.tools.ProducerPerformance test $((1000*1024*1024/$i)) $i -1 acks=1 bootstrap.servers=esv4-hcl198.grid.linkedin.com:9092 buffer.memory=67108864 batch.size=128000
done;
Consumer
Consumer throughput
bin/kafka-consumer-perf-test.sh --zookeeper esv4-hcl197.grid.linkedin.com:2181 --messages 50000000 --topic test --threads 1
3 Consumers
On three servers, run:
bin/kafka-consumer-perf-test.sh --zookeeper esv4-hcl197.grid.linkedin.com:2181 --messages 50000000 --topic test --threads 1
End-to-end Latency
bin/kafka-run-class.sh kafka.tools.TestEndToEndLatency esv4-hcl198.grid.linkedin.com:9092 esv4-hcl197.grid.linkedin.com:2181 test 5000
Producer and consumer
bin/kafka-run-class.sh org.apache.kafka.clients.tools.ProducerPerformance test 50000000 100 -1 acks=1 bootstrap.servers=esv4-hcl198.grid.linkedin.com:9092 buffer.memory=67108864 batch.size=8196
bin/kafka-consumer-perf-test.sh --zookeeper esv4-hcl197.grid.linkedin.com:2181 --messages 50000000 --topic test --threads 1
# Licensed to the Apache Software Foundation (ASF) under one or more
# contributor license agreements. See the NOTICE file distributed with
# this work for additional information regarding copyright ownership.
# The ASF licenses this file to You under the Apache License, Version 2.0
# (the "License"); you may not use this file except in compliance with
# the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# see kafka.server.KafkaConfig for additional details and defaults
############################# Server Basics #############################
# The id of the broker. This must be set to a unique integer for each broker.
broker.id=0
############################# Socket Server Settings #############################
# The port the socket server listens on
port=9092
# Hostname the broker will bind to and advertise to producers and consumers.
# If not set, the server will bind to all interfaces and advertise the value returned from
# from java.net.InetAddress.getCanonicalHostName().
#host.name=localhost
# The number of threads handling network requests
num.network.threads=4
# The number of threads doing disk I/O
num.io.threads=8
# The send buffer (SO_SNDBUF) used by the socket server
socket.send.buffer.bytes=1048576
# The receive buffer (SO_RCVBUF) used by the socket server
socket.receive.buffer.bytes=1048576
# The maximum size of a request that the socket server will accept (protection against OOM)
socket.request.max.bytes=104857600
############################# Log Basics #############################
# The directory under which to store log files
log.dirs=/grid/a/dfs-data/kafka-logs,/grid/b/dfs-data/kafka-logs,/grid/c/dfs-data/kafka-logs,/grid/d/dfs-data/kafka-logs,/grid/e/dfs-data/kafka-logs,/grid/f/dfs-data/kafka-logs
# The number of logical partitions per topic per server. More partitions allow greater parallelism
# for consumption, but also mean more files.
num.partitions=8
############################# Log Flush Policy #############################
# The following configurations control the flush of data to disk. This is the most
# important performance knob in kafka.
# There are a few important trade-offs here:
# 1. Durability: Unflushed data is at greater risk of loss in the event of a crash.
# 2. Latency: Data is not made available to consumers until it is flushed (which adds latency).
# 3. Throughput: The flush is generally the most expensive operation.
# The settings below allow one to configure the flush policy to flush data after a period of time or
# every N messages (or both). This can be done globally and overridden on a per-topic basis.
# Per-topic overrides for log.flush.interval.ms
#log.flush.intervals.ms.per.topic=topic1:1000, topic2:3000
############################# Log Retention Policy #############################
# The following configurations control the disposal of log segments. The policy can
# be set to delete segments after a period of time, or after a given size has accumulated.
# A segment will be deleted whenever *either* of these criteria are met. Deletion always happens
# from the end of the log.
# The minimum age of a log file to be eligible for deletion
log.retention.hours=168
# A size-based retention policy for logs. Segments are pruned from the log as long as the remaining
# segments don't drop below log.retention.bytes.
#log.retention.bytes=1073741824
# The maximum size of a log segment file. When this size is reached a new log segment will be created.
log.segment.bytes=536870912
# The interval at which log segments are checked to see if they can be deleted according
# to the retention policies
log.cleanup.interval.mins=1
############################# Zookeeper #############################
# Zookeeper connection string (see zookeeper docs for details).
# This is a comma separated host:port pairs, each corresponding to a zk
# server. e.g. "127.0.0.1:3000,127.0.0.1:3001,127.0.0.1:3002".
# You can also append an optional chroot string to the urls to specify the
# root directory for all kafka znodes.
zookeeper.connect=esv4-hcl197.grid.linkedin.com:2181
# Timeout in ms for connecting to zookeeper
zookeeper.connection.timeout.ms=1000000
# metrics reporter properties
kafka.metrics.polling.interval.secs=5
kafka.metrics.reporters=kafka.metrics.KafkaCSVMetricsReporter
kafka.csv.metrics.dir=/tmp/kafka_metrics
# Disable csv reporting by default.
kafka.csv.metrics.reporter.enabled=false
replica.lag.max.messages=10000000
@Avi-bot-art
Copy link

I believe the zookeeper switch on 'kafka-consumer-perf-test' has deprecated for 'kafka-consumer-perf-test.bat' . (I am running remotely from kafka path CLI)
Running the below from CLI I am getting the error.

kafka-consumer-perf-test --topic test --bootstrap-server test:XXXX --messages 10 --threads 1 --consumer.config C:*****\consumer.properties --group test --timeout 100000 --print-metrics

Exception in thread "main" java.util.IllegalFormatConversionException: f != java.lang.Integer
at java.util.Formatter$FormatSpecifier.failConversion(Formatter.java:4302)
at java.util.Formatter$FormatSpecifier.printFloat(Formatter.java:2806)
at java.util.Formatter$FormatSpecifier.print(Formatter.java:2753)
at java.util.Formatter.format(Formatter.java:2520)
at java.util.Formatter.format(Formatter.java:2455)
at java.lang.String.format(String.java:2940)
at scala.collection.immutable.StringLike.format(StringLike.scala:354)
at scala.collection.immutable.StringLike.format$(StringLike.scala:353)
at scala.collection.immutable.StringOps.format(StringOps.scala:33)
at kafka.utils.ToolsUtils$.$anonfun$printMetrics$3(ToolsUtils.scala:60)
at kafka.utils.ToolsUtils$.$anonfun$printMetrics$3$adapted(ToolsUtils.scala:58)
at scala.collection.mutable.ResizableArray.foreach(ResizableArray.scala:62)
at scala.collection.mutable.ResizableArray.foreach$(ResizableArray.scala:55)
at scala.collection.mutable.ArrayBuffer.foreach(ArrayBuffer.scala:49)
at kafka.utils.ToolsUtils$.printMetrics(ToolsUtils.scala:58)
at kafka.tools.ConsumerPerformance$.main(ConsumerPerformance.scala:82)
at kafka.tools.ConsumerPerformance.main(ConsumerPerformance.scala)

@happyfeetw
Copy link

happyfeetw commented Oct 14, 2020

@daixiang0
Hi, I can't understand the first step. What do you mean by saying "clone kafka source code"?

I think to clone source code is to build Kafka from source. If you've already installed, just go run the shell script. :)

@le-cardinal
Copy link

le-cardinal commented Mar 6, 2023

Hello

Single-thread, sync 3x replication

bin/kafka-run-class.sh org.apache.kafka.clients.tools.ProducerPerformance test 50000000 100 -1 acks=-1 bootstrap.servers=esv4-hcl198.grid.linkedin.com:9092 buffer.memory=67108864 batch.size=64000

Three Producers, 3x async replication
bin/kafka-run-class.sh org.apache.kafka.clients.tools.ProducerPerformance test 50000000 100 -1 acks=1 bootstrap.servers=esv4-hcl198.grid.linkedin.com:9092 buffer.memory=67108864 batch.size=8196

Sorry but what is the difference between sync and async replication ? i was thinking synch mode mode corresponds to acks=1 and async correspond to acks=all but the command lines let me think something different ?

Thanks

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment