Skip to content

Instantly share code, notes, and snippets.

@jnorthrup

jnorthrup/don't you love peaking into other's dmesg dumps?

Created June 8, 2011 19:00
Show Gist options
  • Save jnorthrup/1015093 to your computer and use it in GitHub Desktop.
Save jnorthrup/1015093 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
don't you love peaking into other's dmesg dumps?
[ 1.923920] PNP: PS/2 appears to have AUX port disabled, if this is incorrect please boot with i8042.nopnp
[ 1.924404] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.924481] mice: PS/2 mouse device common for all mice
[ 1.924534] cpuidle: using governor ladder
[ 1.924536] cpuidle: using governor menu
[ 1.924620] TCP cubic registered
[ 1.924622] NET: Registered protocol family 17
[ 1.924706] registered taskstats version 1
[ 1.925002] Freeing unused kernel memory: 456k freed
[ 1.942218] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
[ 2.317856] libata version 3.00 loaded.
[ 2.867524] ahci 0000:00:1f.2: version 3.0
[ 2.867539] ahci 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20
[ 2.867585] ahci 0000:00:1f.2: irq 66 for MSI/MSI-X
[ 2.867605] ahci: SSS flag set, parallel bus scan disabled
[ 2.867637] ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode
[ 2.867639] ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part ccc ems sxs
[ 2.867642] ahci 0000:00:1f.2: setting latency timer to 64
[ 2.877996] scsi0 : ahci
[ 2.878097] scsi1 : ahci
[ 2.878185] scsi2 : ahci
[ 2.878284] scsi3 : ahci
[ 2.878365] scsi4 : ahci
[ 2.878450] scsi5 : ahci
[ 2.878593] ata1: SATA max UDMA/133 abar m2048@0xf8efc000 port 0xf8efc100 irq 66
[ 2.878595] ata2: SATA max UDMA/133 abar m2048@0xf8efc000 port 0xf8efc180 irq 66
[ 2.878597] ata3: SATA max UDMA/133 abar m2048@0xf8efc000 port 0xf8efc200 irq 66
[ 2.878599] ata4: SATA max UDMA/133 abar m2048@0xf8efc000 port 0xf8efc280 irq 66
[ 2.878600] ata5: SATA max UDMA/133 abar m2048@0xf8efc000 port 0xf8efc300 irq 66
[ 2.878602] ata6: SATA max UDMA/133 abar m2048@0xf8efc000 port 0xf8efc380 irq 66
[ 3.337475] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.389580] ata1.00: ATA-8: Corsair CSSD-F80GBP2, 1.1, max UDMA/133
[ 3.389583] ata1.00: 175836528 sectors, multi 1: LBA48 NCQ (depth 31/32), AA
[ 3.439496] ata1.00: configured for UDMA/133
[ 3.439580] scsi 0:0:0:0: Direct-Access ATA Corsair CSSD-F80 1.1 PQ: 0 ANSI: 5
[ 3.439731] sd 0:0:0:0: [sda] 175836528 512-byte logical blocks: (90.0 GB/83.8 GiB)
[ 3.439779] sd 0:0:0:0: [sda] Write Protect is off
[ 3.439781] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 3.439796] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 3.440371] sda: sda1 sda2 sda3 < sda5 >
[ 3.440698] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.743756] ata2: SATA link down (SStatus 0 SControl 300)
[ 4.048238] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.352721] ata4: SATA link down (SStatus 0 SControl 300)
[ 4.657202] ata5: SATA link down (SStatus 0 SControl 300)
[ 4.961684] ata6: SATA link down (SStatus 0 SControl 300)
[ 5.061775] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 5.178327] scsi: <fdomain> Detection failed (no card)
[ 5.205314] GDT-HA: Storage RAID Controller Driver. Version: 3.05
[ 5.343637] Fusion MPT base driver 3.04.17
[ 5.343639] Copyright (c) 1999-2008 LSI Corporation
[ 5.381468] Fusion MPT SPI Host driver 3.04.17
[ 5.413137] Fusion MPT FC Host driver 3.04.17
[ 5.440415] Fusion MPT SAS Host driver 3.04.17
[ 5.457204] 3ware Storage Controller device driver for Linux v1.26.02.003.
[ 5.474328] 3ware 9000 Storage Controller device driver for Linux v2.26.02.014.
[ 5.491520] Compaq SMART2 Driver (v 2.6.0)
[ 5.519556] HP CISS Driver (v 3.6.26)
[ 5.572541] Adaptec aacraid driver 1.1-5[26400]-ms
[ 5.612197] megaraid cmm: 2.20.2.7 (Release Date: Sun Jul 16 00:01:03 EST 2006)
[ 5.613290] megaraid: 2.20.5.1 (Release Date: Thu Nov 16 15:32:35 EST 2006)
[ 5.661592] megasas: 00.00.04.31-rc1 Mon. May 3, 11:41:51 PST 2010
[ 5.683917] QLogic Fibre Channel HBA Driver: 8.03.05-k0
[ 5.706542] Emulex LightPulse Fibre Channel SCSI driver 8.3.18
[ 5.706543] Copyright(c) 2004-2009 Emulex. All rights reserved.
[ 5.765974] aic94xx: Adaptec aic94xx SAS/SATA driver version 1.0.3 loaded
[ 5.785993] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 5.786012] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.786042] ehci_hcd 0000:00:1a.7: setting latency timer to 64
[ 5.786045] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[ 5.786049] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1
[ 5.794321] ehci_hcd 0000:00:1a.7: debug port 1
[ 5.798198] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported
[ 5.798210] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xf8eff000
[ 5.807243] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00
[ 5.807394] hub 1-0:1.0: USB hub found
[ 5.807397] hub 1-0:1.0: 6 ports detected
[ 5.807450] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.807460] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.807463] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.807465] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2
[ 5.814266] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.818153] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported
[ 5.818162] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf8efe000
[ 5.827207] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 5.827355] hub 2-0:1.0: USB hub found
[ 5.827358] hub 2-0:1.0: 6 ports detected
[ 5.851307] Initializing USB Mass Storage driver...
[ 5.851344] usbcore: registered new interface driver usb-storage
[ 5.851345] USB Mass Storage support registered.
[ 5.870874] uhci_hcd: USB Universal Host Controller Interface driver
[ 5.870897] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 5.870902] uhci_hcd 0000:00:1a.0: setting latency timer to 64
[ 5.870904] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[ 5.870907] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3
[ 5.882146] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[ 5.882295] hub 3-0:1.0: USB hub found
[ 5.882297] hub 3-0:1.0: 2 ports detected
[ 5.882344] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21
[ 5.882348] uhci_hcd 0000:00:1a.1: setting latency timer to 64
[ 5.882350] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[ 5.882353] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4
[ 5.890127] uhci_hcd 0000:00:1a.1: irq 21, io base 0x0000b880
[ 5.890275] hub 4-0:1.0: USB hub found
[ 5.890278] hub 4-0:1.0: 2 ports detected
[ 5.890326] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 5.890330] uhci_hcd 0000:00:1a.2: setting latency timer to 64
[ 5.890332] uhci_hcd 0000:00:1a.2: UHCI Host Controller
[ 5.890335] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5
[ 5.898111] uhci_hcd 0000:00:1a.2: irq 19, io base 0x0000bc00
[ 5.898260] hub 5-0:1.0: USB hub found
[ 5.898262] hub 5-0:1.0: 2 ports detected
[ 5.898306] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.898310] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 5.898312] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 5.898315] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6
[ 5.906090] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000b080
[ 5.906240] hub 6-0:1.0: USB hub found
[ 5.906243] hub 6-0:1.0: 2 ports detected
[ 5.906288] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.906292] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 5.906295] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 5.906297] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7
[ 5.913079] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000b400
[ 5.913234] hub 7-0:1.0: USB hub found
[ 5.913236] hub 7-0:1.0: 2 ports detected
[ 5.913280] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 5.913284] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 5.913286] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 5.913289] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8
[ 5.921065] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000b480
[ 5.921216] hub 8-0:1.0: USB hub found
[ 5.921219] hub 8-0:1.0: 2 ports detected
[ 5.959711] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 5.981113] usbcore: registered new interface driver usbhid
[ 5.981115] usbhid: USB HID core driver
[ 6.000994] sl811: driver sl811-hcd, 19 May 2005
[ 6.108729] usb 1-6: new high speed USB device using ehci_hcd and address 2
[ 6.225254] scsi6 : usb-storage 1-6:1.0
[ 6.285743] device-mapper: uevent: version 1.0.3
[ 6.285813] device-mapper: ioctl: 4.18.0-ioctl (2010-06-29) initialised: dm-devel@redhat.com
[ 6.492551] md: raid0 personality registered for level 0
[ 6.515692] md: raid1 personality registered for level 1
[ 6.561961] usb 8-1: new full speed USB device using uhci_hcd and address 2
[ 6.565957] raid6: int64x1 3371 MB/s
[ 6.582922] raid6: int64x2 3285 MB/s
[ 6.599903] raid6: int64x4 2847 MB/s
[ 6.616883] raid6: int64x8 2195 MB/s
[ 6.633832] raid6: sse2x1 8273 MB/s
[ 6.650802] raid6: sse2x2 9664 MB/s
[ 6.667775] raid6: sse2x4 10738 MB/s
[ 6.667776] raid6: using algorithm sse2x4 (10738 MB/s)
[ 6.677025] async_tx: api initialized (async)
[ 6.681365] xor: automatically using best checksumming function: generic_sse
[ 6.685742] generic_sse: 12660.000 MB/sec
[ 6.685743] xor: using function: generic_sse (12660.000 MB/sec)
[ 6.704434] md: raid6 personality registered for level 6
[ 6.704436] md: raid5 personality registered for level 5
[ 6.704437] md: raid4 personality registered for level 4
[ 6.730651] md: raid10 personality registered for level 10
[ 6.749722] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.0/input/input1
[ 6.749805] generic-usb 0003:046D:C52B.0001: input,hidraw0: USB HID v1.11 Keyboard [Logitech USB Receiver] on usb-0000:00:1d.2-1/input0
[ 6.753008] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:1d.2/usb8/8-1/8-1:1.1/input/input2
[ 6.753215] generic-usb 0003:046D:C52B.0002: input,hiddev0,hidraw1: USB HID v1.11 Mouse [Logitech USB Receiver] on usb-0000:00:1d.2-1/input1
[ 6.758811] generic-usb 0003:046D:C52B.0003: hiddev0,hidraw2: USB HID v1.11 Device [Logitech USB Receiver] on usb-0000:00:1d.2-1/input2
[ 6.779663] RPC: Registered udp transport module.
[ 6.779664] RPC: Registered tcp transport module.
[ 6.779665] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 6.814906] fuse init (API version 7.15)
[ 6.840975] e1000: Intel(R) PRO/1000 Network Driver - version 7.3.21-k8-NAPI
[ 6.840977] e1000: Copyright (c) 1999-2006 Intel Corporation.
[ 6.903060] Loading iSCSI transport class v2.0-870.
[ 6.968873] iscsi: registered transport (tcp)
[ 7.224937] scsi 6:0:0:0: CD-ROM PLEXTOR DVDR PX-716A 1.11 PQ: 0 ANSI: 0 CCS
[ 7.226918] sr0: scsi3-mmc drive: 94x/94x writer cd/rw xa/form2 cdda tray
[ 7.226921] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 7.227047] sr 6:0:0:0: Attached scsi CD-ROM sr0
[ 7.227134] sr 6:0:0:0: Attached scsi generic sg1 type 5
[ 17.020686] fbcondecor: console 0 using theme 'livecd-10'
[ 17.115237] fbcondecor: switched decor state to 'on' on console 0
[ 22.246707] ISO 9660 Extensions: Microsoft Joliet Level 3
[ 22.247954] ISO 9660 Extensions: RRIP_1991A
[ 22.256797] aufs 2.1-standalone.tree-37-20110117
[ 22.621793] aufs test_add:261:mount[15384]: uid/gid/perm /mnt/static 0/0/0755, 0/0/01777
[ 32.728221] udev[15889]: starting version 164
[ 32.987819] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 33.131344] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input3
[ 33.131367] ACPI: Power Button [PWRB]
[ 33.131398] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input4
[ 33.131412] ACPI: Power Button [PWRF]
[ 33.780636] wmi: Mapper loaded
[ 33.786295] ACPI: acpi_idle registered with cpuidle
[ 33.792000] Monitor-Mwait will be used to enter C-1 state
[ 33.792020] Monitor-Mwait will be used to enter C-2 state
[ 33.792035] Monitor-Mwait will be used to enter C-3 state
[ 34.129523] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 34.850136] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 34.850139] ACPI: resource 0000:00:1f.3 [io 0x1000-0x101f] conflicts with ACPI region SMRG [io 0x1000-0x100f 64bit pref window disabled]
[ 34.850141] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 35.797710] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 36.111993] rtc_cmos 00:03: RTC can wake from S4
[ 36.118846] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0
[ 36.118873] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 37.587820] xhci_hcd 0000:02:00.0: PCI INT A -> GSI 29 (level, low) -> IRQ 29
[ 37.588060] xhci_hcd 0000:02:00.0: setting latency timer to 64
[ 37.588063] xhci_hcd 0000:02:00.0: xHCI Host Controller
[ 37.588066] xhci_hcd 0000:02:00.0: new USB bus registered, assigned bus number 9
[ 37.685196] sky2: driver version 1.28
[ 37.685214] sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 37.685222] sky2 0000:06:00.0: setting latency timer to 64
[ 37.685546] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3
[ 37.685628] sky2 0000:06:00.0: irq 67 for MSI/MSI-X
[ 37.685732] sky2 0000:06:00.0: eth0: addr 48:5b:39:7e:14:05
[ 37.705907] xhci_hcd 0000:02:00.0: irq 29, io mem 0xf8ffe000
[ 37.706299] xhci_hcd 0000:02:00.0: irq 68 for MSI/MSI-X
[ 37.706301] xhci_hcd 0000:02:00.0: irq 69 for MSI/MSI-X
[ 37.706303] xhci_hcd 0000:02:00.0: irq 70 for MSI/MSI-X
[ 37.706305] xhci_hcd 0000:02:00.0: irq 71 for MSI/MSI-X
[ 37.706307] xhci_hcd 0000:02:00.0: irq 72 for MSI/MSI-X
[ 37.706309] xhci_hcd 0000:02:00.0: irq 73 for MSI/MSI-X
[ 37.706311] xhci_hcd 0000:02:00.0: irq 74 for MSI/MSI-X
[ 37.706312] xhci_hcd 0000:02:00.0: irq 75 for MSI/MSI-X
[ 37.709237] usb usb9: No SuperSpeed endpoint companion for config 1 interface 0 altsetting 0 ep 129: using minimum values
[ 37.709284] xHCI xhci_add_endpoint called for root hub
[ 37.709286] xHCI xhci_check_bandwidth called for root hub
[ 37.709305] hub 9-0:1.0: USB hub found
[ 37.709307] hub 9-0:1.0: 4 ports detected
[ 37.908981] usb 9-1: new SuperSpeed USB device using xhci_hcd and address 2
[ 37.921396] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 37.921769] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 37.922144] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 37.922517] xhci_hcd 0000:02:00.0: WARN: short transfer on control ep
[ 37.923642] scsi7 : usb-storage 9-1:1.0
[ 38.271705] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 38.271983] HDA Intel 0000:00:1b.0: irq 76 for MSI/MSI-X
[ 38.271998] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 38.279951] nouveau 0000:05:00.0: PCI INT A -> GSI 32 (level, low) -> IRQ 32
[ 38.279954] nouveau 0000:05:00.0: setting latency timer to 64
[ 38.281687] [drm] nouveau 0000:05:00.0: Detected an NV40 generation card (0x049500a2)
[ 38.281689] checking generic (d0000000 10000000) vs hw (d0000000 10000000)
[ 38.281690] fb: conflicting fb hw usage nouveaufb vs VESA VGA - removing generic driver
[ 38.281708] Console: switching to colour dummy device 80x25
[ 38.283314] [drm] nouveau 0000:05:00.0: Attempting to load BIOS image from PRAMIN
[ 38.327605] [drm] nouveau 0000:05:00.0: ... appears to be valid
[ 38.327608] [drm] nouveau 0000:05:00.0: BIT BIOS found
[ 38.327609] [drm] nouveau 0000:05:00.0: Bios version 05.71.22.42
[ 38.327611] [drm] nouveau 0000:05:00.0: TMDS table version 1.1
[ 38.327612] [drm] nouveau 0000:05:00.0: TMDS table script pointers not stubbed
[ 38.327613] [drm] nouveau 0000:05:00.0: BIT table 'd' not found
[ 38.327614] [drm] nouveau 0000:05:00.0: Found Display Configuration Block version 3.0
[ 38.327616] [drm] nouveau 0000:05:00.0: Raw DCB entry 0: 01000300 00000028
[ 38.327617] [drm] nouveau 0000:05:00.0: Raw DCB entry 1: 03000302 00000000
[ 38.327619] [drm] nouveau 0000:05:00.0: Raw DCB entry 2: 04011310 00000028
[ 38.327620] [drm] nouveau 0000:05:00.0: Raw DCB entry 3: 0c011312 00000000
[ 38.327622] [drm] nouveau 0000:05:00.0: Raw DCB entry 4: 020223f1 00c0c080
[ 38.327623] [drm] nouveau 0000:05:00.0: DCB connector table: VHER 0x30 5 10 2
[ 38.327625] [drm] nouveau 0000:05:00.0: 0: 0x00001030: type 0x30 idx 0 tag 0x07
[ 38.327627] [drm] nouveau 0000:05:00.0: 1: 0x00002130: type 0x30 idx 1 tag 0x08
[ 38.327629] [drm] nouveau 0000:05:00.0: 2: 0x00000210: type 0x10 idx 2 tag 0xff
[ 38.327630] [drm] nouveau 0000:05:00.0: 3: 0x00000211: type 0x11 idx 3 tag 0xff
[ 38.327632] [drm] nouveau 0000:05:00.0: 4: 0x00000213: type 0x13 idx 4 tag 0xff
[ 38.327637] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 0 at offset 0xD1D8
[ 38.327683] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 1 at offset 0xDACB
[ 38.345005] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 2 at offset 0xE4F9
[ 38.345026] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 3 at offset 0xE674
[ 38.350994] [drm] nouveau 0000:05:00.0: Parsing VBIOS init table 4 at offset 0xE7D0
[ 38.369975] [drm] nouveau 0000:05:00.0: 2 available performance level(s)
[ 38.369978] [drm] nouveau 0000:05:00.0: 0: memory 700MHz core 550MHz voltage 1250mV fanspeed 20%
[ 38.369980] [drm] nouveau 0000:05:00.0: 1: memory 725MHz core 600MHz voltage 1450mV fanspeed 100%
[ 38.369987] [drm] nouveau 0000:05:00.0: c: memory 702MHz core 550MHz voltage 1250mV
[ 38.370008] [drm] nouveau 0000:05:00.0: Detected 512MiB VRAM
[ 38.370240] [TTM] Zone kernel: Available graphics memory: 6181988 kiB.
[ 38.370243] [TTM] Zone dma32: Available graphics memory: 2097152 kiB.
[ 38.370246] [TTM] Initializing pool allocator.
[ 38.370272] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining
[ 38.403956] [drm] nouveau 0000:05:00.0: 512 MiB GART (aperture)
[ 38.405563] [drm] nouveau 0000:05:00.0: Allocating FIFO number 0
[ 38.411258] [drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 0
[ 38.411311] [drm] nouveau 0000:05:00.0: Setting dpms mode 3 on vga encoder (output 0)
[ 38.411313] [drm] nouveau 0000:05:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 38.411315] [drm] nouveau 0000:05:00.0: Setting dpms mode 3 on vga encoder (output 2)
[ 38.411317] [drm] nouveau 0000:05:00.0: Setting dpms mode 3 on tmds encoder (output 3)
[ 38.411318] [drm] nouveau 0000:05:00.0: Setting dpms mode 3 on TV encoder (output 4)
[ 38.654098] [drm] nouveau 0000:05:00.0: allocated 1920x1080 fb: 0x49000, bo ffff88033c3a8400
[ 38.664446] [drm] nouveau 0000:05:00.0: 0xC5B5: Parsing digital output script table
[ 38.715402] [drm] nouveau 0000:05:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 38.715407] [drm] nouveau 0000:05:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 38.725710] [drm] nouveau 0000:05:00.0: 0xC605: Parsing digital output script table
[ 38.776257] [drm] nouveau 0000:05:00.0: Setting dpms mode 0 on tmds encoder (output 3)
[ 38.776261] [drm] nouveau 0000:05:00.0: Output DVI-I-2 is running on CRTC 1 using output C
[ 38.776268] Console: switching to colour frame buffer device 210x65
[ 38.776775] fb0: nouveaufb frame buffer device
[ 38.776776] drm: registered panic notifier
[ 38.776779] [drm] Initialized nouveau 0.0.16 20090420 for 0000:05:00.0 on minor 0
[ 38.923032] scsi 7:0:0:0: Direct-Access WD My Passport 0730 1012 PQ: 0 ANSI: 6
[ 38.923769] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 38.924177] sd 7:0:0:0: [sdb] 1953458176 512-byte logical blocks: (1.00 TB/931 GiB)
[ 38.924344] sd 7:0:0:0: [sdb] Write Protect is off
[ 38.924346] sd 7:0:0:0: [sdb] Mode Sense: 47 00 10 08
[ 38.924348] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 38.924929] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 38.964104] sdb: sdb1
[ 38.965120] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 38.965124] sd 7:0:0:0: [sdb] Attached SCSI disk
[ 39.144590] hda_codec: ALC889: BIOS auto-probing.
[ 41.092698] aufs au_new_inode:412:udisks-part-id[16116]: Warning: Un-notified UDBA or repeatedly renamed dir, b1, squashfs, lib64, hi28260, i347.
[ 42.230067] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 50.497236] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 50.560789] xhci_hcd 0000:02:00.0: WARN: Stalled endpoint
[ 51.078054] warning: process `hwsetup' used the deprecated sysctl system call with 1.23.
[ 51.551671] usbcore: registered new interface driver usbserial
[ 51.551679] USB Serial support registered for generic
[ 51.551693] usbcore: registered new interface driver usbserial_generic
[ 51.551694] usbserial: USB Serial Driver core
[ 51.611173] USB Serial support registered for GSM modem (1-port)
[ 51.611219] usbcore: registered new interface driver option
[ 51.611220] option: v0.7.2:USB Driver for GSM modems
[ 64.736670] NET: Registered protocol family 10
[ 64.737719] lo: Disabled Privacy Extensions
[ 69.268915] [drm] nouveau 0000:05:00.0: Allocating FIFO number 1
[ 69.275021] [drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 1
[ 72.599024] [drm] nouveau 0000:05:00.0: Allocating FIFO number 2
[ 72.604767] [drm] nouveau 0000:05:00.0: nouveau_channel_alloc: initialised FIFO 2
[ 73.078486] [drm] nouveau 0000:05:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 73.098663] [drm] nouveau 0000:05:00.0: 0xC5B5: Parsing digital output script table
[ 73.148823] [drm] nouveau 0000:05:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 73.148828] [drm] nouveau 0000:05:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 97.551058] sky2 0000:06:00.0: eth0: enabling interface
[ 97.552002] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 100.002386] sky2 0000:06:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
[ 100.003279] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 102.962132] sky2 0000:06:00.0: eth0: disabling interface
[ 102.970106] sky2 0000:06:00.0: eth0: enabling interface
[ 102.970917] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 103.054973] sky2 0000:06:00.0: eth0: disabling interface
[ 103.064643] sky2 0000:06:00.0: eth0: enabling interface
[ 103.065479] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 106.075296] sky2 0000:06:00.0: eth0: Link is up at 1000 Mbps, full duplex, flow control both
[ 106.076118] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 115.648118] start_kdeinit (18554): /proc/18554/oom_adj is deprecated, please use /proc/18554/oom_score_adj instead.
[ 116.377308] eth0: no IPv6 routers present
[ 131.023058] ata1.00: configured for UDMA/133
[ 131.023063] ata1: EH complete
[ 806.642348] Btrfs loaded
[ 806.642683] device label not_null devid 1 transid 785732 /dev/sda2
[ 806.643136] btrfs: force clearing of disk cache
[ 806.645386] btrfs: disk space caching is enabled
[ 806.679375] Btrfs detected SSD devices, enabling SSD mode
[ 806.683297] btrfs: unlinked 1 orphans
[ 1058.516553] btrfs: relocating block group 239486369792 flags 36
[ 1058.658849] btrfs: relocating block group 239352152064 flags 36
[ 1059.164585] btrfs: found 389 extents
[ 1059.178117] btrfs: relocating block group 238278410240 flags 1
[ 1074.761021] btrfs: found 13443 extents
[ 1079.991514] btrfs: found 13443 extents
[ 1080.079339] btrfs: relocating block group 237204668416 flags 1
[ 1094.118338] btrfs: found 11210 extents
[ 1098.302026] btrfs: found 11210 extents
[ 1098.366554] btrfs: relocating block group 236130926592 flags 1
[ 1113.954463] btrfs: found 7103 extents
[ 1117.123178] btrfs: found 7103 extents
[ 1117.185138] btrfs: relocating block group 235057184768 flags 1
[ 1133.758647] btrfs: found 9918 extents
[ 1136.531748] btrfs: found 9918 extents
[ 1136.588527] btrfs: relocating block group 233983442944 flags 1
[ 1148.987712] btrfs: found 7342 extents
[ 1154.448018] btrfs: found 7342 extents
[ 1154.514309] btrfs: relocating block group 232909701120 flags 1
[ 1171.501408] btrfs: found 9231 extents
[ 1174.285674] btrfs: found 9231 extents
[ 1174.340793] btrfs: relocating block group 232775483392 flags 36
[ 1179.953384] btrfs: found 27336 extents
[ 1180.008427] btrfs: relocating block group 231701741568 flags 1
[ 1196.328503] btrfs: found 10058 extents
[ 1199.625877] btrfs: found 10058 extents
[ 1199.708645] btrfs: relocating block group 231567523840 flags 36
[ 1205.430203] btrfs: found 18879 extents
[ 1205.449250] btrfs: relocating block group 211166429184 flags 36
[ 1206.792288] ------------[ cut here ]------------
[ 1206.792290] kernel BUG at fs/btrfs/extent-tree.c:1404!
[ 1206.792291] invalid opcode: 0000 [#1] SMP
[ 1206.792293] last sysfs file: /sys/devices/pci0000:00/0000:00:1c.2/0000:06:00.0/net/eth0/carrier
[ 1206.792295] CPU 6
[ 1206.792295] Modules linked in: btrfs zlib_deflate libcrc32c ac battery fan thermal ipv6 snd_seq_oss snd_seq_midi_event snd_seq snd_seq_device snd_pcm_oss snd_mixer_oss option usb_wwan usbserial snd_hda_codec_realtek nouveau snd_hda_intel sky2 snd_hda_codec xhci_hcd video output snd_hwdep snd_pcm rtc_cmos joydev pcspkr snd_timer rtc_core i2c_i801 snd shpchp processor wmi snd_page_alloc rtc_lib button pci_hotplug thermal_sys aufs iscsi_tcp libiscsi_tcp libiscsi scsi_transport_iscsi tg3 libphy e1000 fuse nfs lockd sunrpc raid10 raid456 async_raid6_recov async_memcpy async_pq async_xor xor async_tx raid6_pq raid1 raid0 dm_snapshot dm_crypt dm_mirror dm_region_hash dm_log dm_mod scsi_wait_scan hid_pl hid_monterey hid_microsoft hid_logitech ff_memless hid_ezkey hid_cypress hid_chicony hid_cherry hid_belkin hid_apple hid_a4tech sl811_hcd usbhid ohci_hcd ssb mmc_core uhci_hcd usb_storage ehci_hcd aic94xx libsas lpfc qla2xxx megaraid_sas megaraid_mbox megaraid_mm megaraid aacraid sx8 DAC960 cciss 3w_9xxx 3w_xxxx mptsas scsi_transport_sas mptfc scsi_transport_fc scsi_tgt mptspi mptscsih mptbase atp870u dc395x qla1280 dmx3191d sym53c8xx gdth advansys initio BusLogic arcmsr aic7xxx aic79xx scsi_transport_spi sg pdc_adma sata_inic162x sata_mv ata_piix ahci libahci sata_qstor sata_vsc sata_uli sata_sis sata_sx4 sata_nv sata_via sata_svw sata_sil24 sata_sil sata_promise pata_sl82c105 pata_cs5530 pata_cs5520 pata_via pata_jmicron pata_marvell pata_sis pata_netcell pata_sc1200 pata_pdc202xx_old pata_triflex pata_atiixp pata_amd pata_ali pata_it8213 pata_pcmcia pcmcia pcmcia_core pata_ns87415 pata_ns87410 pata_serverworks pata_artop pata_it821x pata_hpt3x2n pata_hpt3x3 pata_hpt37x pata_hpt366 pata_cmd64x pata_efar pata_rz1000 pata_sil680 pata_radisys pata_pdc2027x pata_mpiix libata
[ 1206.792359]
[ 1206.792361] Pid: 21380, comm: btrfs Tainted: G W 2.6.37-gentoo-r2 #1 System manufacturer System Product Name/P6X58D PREMIUM
[ 1206.792364] RIP: 0010:[<ffffffffa07b4e95>] [<ffffffffa07b4e95>] lookup_inline_extent_backref+0xee/0x3fe [btrfs]
[ 1206.792372] RSP: 0018:ffff8802da68f898 EFLAGS: 00010202
[ 1206.792373] RAX: 0000000000000001 RBX: ffff8802bd0f3130 RCX: ffff880000000000
[ 1206.792374] RDX: 0000000000000001 RSI: ffff8802da68ffd8 RDI: ffff8802bd39fa70
[ 1206.792376] RBP: 00000000000000b6 R08: 0000000000000011 R09: 6db6db6db6db6db7
[ 1206.792377] R10: 000f680000000000 R11: 001000a800000031 R12: ffff8802a63e5360
[ 1206.792378] R13: 0000000000000000 R14: 0000002d3cbbc000 R15: 0000000000000009
[ 1206.792380] FS: 00007f865dffa740(0000) GS:ffff8800bf4c0000(0000) knlGS:0000000000000000
[ 1206.792382] CS: 0010 DS: 0000 ES: 0000 CR0: 000000008005003b
[ 1206.792383] CR2: 0000000000bce660 CR3: 00000002da652000 CR4: 00000000000006e0
[ 1206.792384] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 1206.792386] DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
[ 1206.792387] Process btrfs (pid: 21380, threadinfo ffff8802da68e000, task ffff88033ff651f0)
[ 1206.792388] Stack:
[ 1206.792389] 00000000000bfd9b ffffffffa07c52ca 00000009bd0f3130 ffff88033c12e000
[ 1206.792391] ffff8802b6361b80 000000312d91a000 0000000000000edd ffff8802da68f970
[ 1206.792393] 000000312d91a000 00000000001000a8 0100000000000e00 0000000000000ee6
[ 1206.792395] Call Trace:
[ 1206.792402] [<ffffffffa07c52ca>] ? btrfs_mark_buffer_dirty+0xc3/0x104 [btrfs]
[ 1206.792406] [<ffffffffa07b5aab>] ? insert_inline_extent_backref+0x63/0xea [btrfs]
[ 1206.792411] [<ffffffffa07b7bce>] ? __btrfs_free_extent+0x60f/0x62a [btrfs]
[ 1206.792415] [<ffffffffa07b6900>] ? __btrfs_inc_extent_ref.clone.53+0xa9/0x1da [btrfs]
[ 1206.792420] [<ffffffffa07ba82d>] ? run_clustered_refs+0x666/0x722 [btrfs]
[ 1206.792425] [<ffffffffa07ba9b2>] ? btrfs_run_delayed_refs+0xc9/0x1bf [btrfs]
[ 1206.792432] [<ffffffffa07c6d24>] ? __btrfs_end_transaction+0x65/0x1ed [btrfs]
[ 1206.792437] [<ffffffffa07fd930>] ? relocate_block_group+0x295/0x4ae [btrfs]
[ 1206.792443] [<ffffffffa07de6f5>] ? btrfs_wait_ordered_extents+0x33/0x1bc [btrfs]
[ 1206.792449] [<ffffffffa07c747b>] ? btrfs_clean_old_snapshots+0x7b/0x13c [btrfs]
[ 1206.792454] [<ffffffffa07fdc8b>] ? btrfs_relocate_block_group+0x142/0x270 [btrfs]
[ 1206.792460] [<ffffffffa07e5f79>] ? btrfs_relocate_chunk.clone.42+0x53/0x465 [btrfs]
[ 1206.792464] [<ffffffffa07ac373>] ? btrfs_set_path_blocking+0x21/0x32 [btrfs]
[ 1206.792468] [<ffffffffa07b1b38>] ? btrfs_search_slot+0x6ae/0x740 [btrfs]
[ 1206.792472] [<ffffffffa07b3bae>] ? btrfs_previous_item+0xb9/0xf7 [btrfs]
[ 1206.792477] [<ffffffffa07e7ae7>] ? btrfs_balance+0x1c4/0x20f [btrfs]
[ 1206.792481] [<ffffffff810af9d7>] ? do_filp_open+0x54b/0x5c6
[ 1206.792487] [<ffffffffa07eda47>] ? btrfs_ioctl+0x637/0x848 [btrfs]
[ 1206.792489] [<ffffffff8101eb63>] ? do_page_fault+0x306/0x33f
[ 1206.792491] [<ffffffff810b1649>] ? do_vfs_ioctl+0x450/0x48f
[ 1206.792493] [<ffffffff810b16c4>] ? sys_ioctl+0x3c/0x60
[ 1206.792496] [<ffffffff81001efb>] ? system_call_fastpath+0x16/0x1b
[ 1206.792497] Code: 44 8b 44 24 14 48 8b 74 24 18 48 8d 54 24 40 41 b9 01 00 00 00 48 89 d9 4c 89 e7 e8 00 c6 ff ff 83 f8 00 0f 8c d2 02 00 00 74 02 <0f> 0b 48 63 73 40 4c 8b 2b 4c 89 ef 48 6b f6 19 48 83 c6 65 e8
[ 1206.792510] RIP [<ffffffffa07b4e95>] lookup_inline_extent_backref+0xee/0x3fe [btrfs]
[ 1206.792515] RSP <ffff8802da68f898>
[ 1206.792529] [drm] nouveau 0000:05:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 1206.812705] [drm] nouveau 0000:05:00.0: 0xC5B5: Parsing digital output script table
[ 1206.859469] [drm] nouveau 0000:05:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 1206.859474] [drm] nouveau 0000:05:00.0: Output DVI-I-1 is running on CRTC 0 using output A
[ 1206.860287] ---[ end trace 6d450e935ee1897e ]---
[ 1215.984038] [drm] nouveau 0000:05:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[ 1216.004212] [drm] nouveau 0000:05:00.0: 0xC5B5: Parsing digital output script table
[ 1216.054877] [drm] nouveau 0000:05:00.0: Setting dpms mode 0 on tmds encoder (output 1)
[ 1216.054882] [drm] nouveau 0000:05:00.0: Output DVI-I-1 is running on CRTC 0 using output A
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment