shell: quick linux scripts for showing network bandwidth or packets-per-second

netpps.sh

#!/bin/bash


if [ -z "$1" ]; then
        echo
        echo usage: $0 network-interface
        echo
        echo e.g. $0 eth0
        echo
        echo shows packets-per-second
        exit
fi

IF=$1

while true
do
        R1=`cat /sys/class/net/$1/statistics/rx_packets`
        T1=`cat /sys/class/net/$1/statistics/tx_packets`
        sleep 1
        R2=`cat /sys/class/net/$1/statistics/rx_packets`
        T2=`cat /sys/class/net/$1/statistics/tx_packets`
        TXPPS=`expr $T2 - $T1`
        RXPPS=`expr $R2 - $R1`
        echo "tx $1: $TXPPS pkts/s rx $1: $RXPPS pkts/s"
done

netspeed.sh

#!/bin/bash

 
if [ -z "$1" ]; then
        echo
        echo usage: $0 network-interface
        echo
        echo e.g. $0 eth0
        echo
        exit
fi

IF=$1

while true
do
        R1=`cat /sys/class/net/$1/statistics/rx_bytes`
        T1=`cat /sys/class/net/$1/statistics/tx_bytes`
        sleep 1
        R2=`cat /sys/class/net/$1/statistics/rx_bytes`
        T2=`cat /sys/class/net/$1/statistics/tx_bytes`
        TBPS=`expr $T2 - $T1`
        RBPS=`expr $R2 - $R1`
        TKBPS=`expr $TBPS / 1024`
        RKBPS=`expr $RBPS / 1024`
        echo "tx $1: $TKBPS kB/s rx $1: $RKBPS kB/s"
done

@joemiller in netspeed.sh you should use kB/s instead kb/s

@mdobrzyn Yep! thanks for pointing that out. Updated.

@nicnepr I came across this new (to me, at least) tool written in Rust that will show network usage by application. It's also cross-platform. Might want to check it out.

https://github.com/imsnif/bandwhich

My version of the script:

#!/bin/bash

# shellcheck disable=SC2034
i=$1
c=$2
e=1

if [ -z "$1" ] || [ -z "$2" ]; then
  echo
  echo usage: "$0" network-interface checkrepeats
  echo e.g. "$0" eth0 10
  echo
  exit
fi

while [ "$e" -le "$c"  ]
do
  # Network Interface Load:
  R1=$(cat /sys/class/net/"$1"/statistics/rx_bytes)
  T1=$(cat /sys/class/net/"$1"/statistics/tx_bytes)
  sleep 1
  R2=$(cat /sys/class/net/"$1"/statistics/rx_bytes)
  T2=$(cat /sys/class/net/"$1"/statistics/tx_bytes)
  TBPS=$(expr $T2 - $T1)
  RBPS=$(expr $R2 - $R1)
  TKBPS=$(expr $TBPS / 1024)
  RKBPS=$(expr $RBPS / 1024)
  # CPU Load:
  CPU_LOAD=$(top -bn1 | grep "Cpu(s)" | sed "s/.*, *\([0-9.]*\)%* id.*/\1/" | awk '{print 100 - $1"%"}') # percentage of CPU in use
  MEM_LOAD=$(free | grep Mem | awk '{print $3/$2 * 100.0}') # percentage of Memory in use
  echo "$1 tx: $TKBPS kB/s rx: $RKBPS kB/s, $(nproc) CPUs @ $CPU_LOAD load, $MEM_LOAD% Memory in use"
  (( e++ ))
done

very nice, thank you

Thanks you Joe Miller! Been struggling for a way to do this, and all my solutions were very convoluted. Your scripts gave me the clues I needed to pull what I needed in a simple fashion. Very much appreciated!!