Skip to content

Instantly share code, notes, and snippets.

@jogboms
Forked from ecerulm/sleepdemoserial.c
Created March 14, 2016 05:42
Show Gist options
  • Save jogboms/37b0c530775df2e138d2 to your computer and use it in GitHub Desktop.
Save jogboms/37b0c530775df2e138d2 to your computer and use it in GitHub Desktop.
/* Sleep Demo Serial
* -----------------
* Example code to demonstrate the sleep functions in a Arduino. Arduino will wake up
* when new data is received in the serial port USART
* Based on Sleep Demo Serial from http://www.arduino.cc/playground/Learning/ArduinoSleepCode
*
* Copyright (C) 2006 MacSimski 2006-12-30
* Copyright (C) 2007 D. Cuartielles 2007-07-08 - Mexico DF
*
* With modifications from Ruben Laguna 2008-10-15
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
#include <avr/power.h>
#include <avr/sleep.h>
int sleepStatus = 0; // variable to store a request for sleep
int count = 0; // counter
void setup()
{
Serial.begin(9600);
}
void sleepNow()
{
/* Now is the time to set the sleep mode. In the Atmega8 datasheet
* http://www.atmel.com/dyn/resources/prod_documents/doc2486.pdf on page 35
* there is a list of sleep modes which explains which clocks and
* wake up sources are available in which sleep modus.
*
* In the avr/sleep.h file, the call names of these sleep modus are to be found:
*
* The 5 different modes are:
* SLEEP_MODE_IDLE -the least power savings
* SLEEP_MODE_ADC
* SLEEP_MODE_PWR_SAVE
* SLEEP_MODE_STANDBY
* SLEEP_MODE_PWR_DOWN -the most power savings
*
* the power reduction management <avr/power.h> is described in
* http://www.nongnu.org/avr-libc/user-manual/group__avr__power.html
*/
set_sleep_mode(SLEEP_MODE_IDLE); // sleep mode is set here
sleep_enable(); // enables the sleep bit in the mcucr register
// so sleep is possible. just a safety pin
power_adc_disable();
power_spi_disable();
power_timer0_disable();
power_timer1_disable();
power_timer2_disable();
power_twi_disable();
sleep_mode(); // here the device is actually put to sleep!!
// THE PROGRAM CONTINUES FROM HERE AFTER WAKING UP
sleep_disable(); // first thing after waking from sleep:
// disable sleep...
power_all_enable();
}
void loop()
{
// display information about the counter
Serial.print("Awake for ");
Serial.print(count);
Serial.println("sec");
count++;
delay(1000); // waits for a second
// compute the serial input
if (Serial.available()) {
int val = Serial.read();
if (val == 'S') {
Serial.println("Serial: Entering Sleep mode");
delay(100); // this delay is needed, the sleep
//function will provoke a Serial error otherwise!!
count = 0;
sleepNow(); // sleep function called here
}
if (val == 'A') {
Serial.println("Hola Caracola"); // classic dummy message
}
}
// check if it should go asleep because of time
if (count >= 10) {
Serial.println("Timer: Entering Sleep mode");
delay(100); // this delay is needed, the sleep
//function will provoke a Serial error otherwise!!
count = 0;
sleepNow(); // sleep function called here
}
}
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment