file.txt

License:  Custom options  _enablecodecs=g729

 need to stop all services and make the following edits to your config.xml file to enable the g729 codec:
Under "RTP Library configuration" add "<category name="vcodecipp"/>" as shown below:
<category name="Rtp">
        <category name="Codecs">
            <!--
                By default all the DTMF relays Prophecy supports are on;
                they can be turned off setting the following params to 0
            -->
            <item name="cisco-rtp" type="int">0</item>
            <item name="rfc2833"   type="int">1</item>
            <category name="vsp">
                <item name="g711ulaw" type="int">1</item>
                <item name="g711alaw" type="int">1</item>
                <item name="linear8"  type="int">1</item>
                <item name="linear16" type="int">1</item>
            </category>
        <category name="vcodecipp"/>
        </category>
Under "<category name="CCXML10">" add "<item name="DialogBridgeType">RTP</item>" as shown below:
<category name="CCXML10">
            <item name="DialogTimeout" type="int"> 5000 </item>
            <item name="MaxDocSize" type="int"> 100000  </item>
            <item name="MaxEvents" type="int"> 64 </item>
            <item name="MaxSpawn" type="int"> 1000 </item>
            <item name="SessionTimeoutSecs" type="int"> 3600 </item>
            <item name="TimeoutScanSecs" type="int"> 300 </item>
            <item name="DialogBridgeType">RTP</item>
            <category name="Xerces">
                <item name="DoSchema" type="int">0</item>
Once these changes have been made to the config.xml, please replace your current license.xml file with the one attached and restart all services.
If you encounter any problems please let us know immediately.