20336ec5-e5e2-4490-9cab-078366ac4e42 dmesg prior to reboot 2015/11/16

gistfile1.txt

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Initializing cgroup subsys cpu
[    0.000000] Initializing cgroup subsys cpuacct
[    0.000000] Linux version 3.12.10-ninja-spheramid-dev201510210722 (root@cc093e1cd442) (gcc version 4.8.2 (Ubuntu/Linaro 4.8.2-16ubuntu4) ) #1 Wed Oct 21 07:40:17 UTC 2015
[    0.000000] CPU: ARMv7 Processor [413fc082] revision 2 (ARMv7), cr=10c53c7d
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] Machine: Generic AM33XX (Flattened Device Tree), model: Variscite AM335x SOM (Ninja Blocks Spheramid)
[    0.000000] cma: CMA: reserved 24 MiB at 9e000000
[    0.000000] Memory policy: ECC disabled, Data cache writeback
[    0.000000] On node 0 totalpages: 130304
[    0.000000] free_area_init_node: node 0, pgdat c08efb98, node_mem_map c092d000
[    0.000000]   Normal zone: 1024 pages used for memmap
[    0.000000]   Normal zone: 0 pages reserved
[    0.000000]   Normal zone: 130304 pages, LIFO batch:31
[    0.000000] CPU: All CPU(s) started in SVC mode.
[    0.000000] AM335X ES2.1 (neon )
[    0.000000] pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768
[    0.000000] pcpu-alloc: [0] 0 
[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 129280
[    0.000000] Kernel command line: console=ttyO0,115200n8 hwserial=e2ec66387278a005ff00ff00ff00ff00 root=/dev/mmcblk0p2 ro rootfstype=ext4 rootwait
[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
[    0.000000] allocated 1048576 bytes of page_cgroup
[    0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[    0.000000] Memory: 481524K/521216K available (6187K kernel code, 581K rwdata, 2000K rodata, 346K init, 236K bss, 39692K reserved, 0K highmem)
[    0.000000] Virtual kernel memory layout:
[    0.000000]     vector  : 0xffff0000 - 0xffff1000   (   4 kB)
[    0.000000]     fixmap  : 0xfff00000 - 0xfffe0000   ( 896 kB)
[    0.000000]     vmalloc : 0xe0800000 - 0xff000000   ( 488 MB)
[    0.000000]     lowmem  : 0xc0000000 - 0xe0000000   ( 512 MB)
[    0.000000]     pkmap   : 0xbfe00000 - 0xc0000000   (   2 MB)
[    0.000000]     modules : 0xbf000000 - 0xbfe00000   (  14 MB)
[    0.000000]       .text : 0xc0008000 - 0xc080703c   (8189 kB)
[    0.000000]       .init : 0xc0808000 - 0xc085e908   ( 347 kB)
[    0.000000]       .data : 0xc0860000 - 0xc08f16d8   ( 582 kB)
[    0.000000]        .bss : 0xc08f16d8 - 0xc092c8f8   ( 237 kB)
[    0.000000] NR_IRQS:16 nr_irqs:16 16
[    0.000000] IRQ: Found an INTC at 0xfa200000 (revision 5.0) with 128 interrupts
[    0.000000] Total of 128 interrupts on 1 active controller
[    0.000000] OMAP clockevent source: timer2 at 24000000 Hz
[    0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 178956ms
[    0.000000] OMAP clocksource: timer1 at 24000000 Hz
[    0.000000] Console: colour dummy device 80x30
[    0.000361] Calibrating delay loop... 398.13 BogoMIPS (lpj=1990656)
[    0.049664] pid_max: default: 32768 minimum: 301
[    0.049787] Security Framework initialized
[    0.049844] Mount-cache hash table entries: 512
[    0.059857] Initializing cgroup subsys memory
[    0.059948] Initializing cgroup subsys devices
[    0.059963] Initializing cgroup subsys freezer
[    0.059975] Initializing cgroup subsys blkio
[    0.059986] Initializing cgroup subsys perf_event
[    0.060079] CPU: Testing write buffer coherency: ok
[    0.060482] Setting up static identity map for 0xc0610ed0 - 0xc0610f40
[    0.061477] devtmpfs: initialized
[    0.063624] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 3
[    0.127674] omap_hwmod: debugss: _wait_target_disable failed
[    0.128453] pinctrl core: initialized pinctrl subsystem
[    0.129464] regulator-dummy: no parameters
[    0.132229] NET: Registered protocol family 16
[    0.134785] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.138206] cpuidle: using governor ladder
[    0.138227] cpuidle: using governor menu
[    0.148826] platform mpu.1: FIXME: clock-name 'fck' DOES NOT exist in dt!
[    0.150216] platform 49000000.edma: FIXME: clock-name 'fck' DOES NOT exist in dt!
[    0.151346] gpiochip_add: registered GPIOs 0 to 31 on device: gpio
[    0.151716] OMAP GPIO hardware version 0.1
[    0.152753] gpiochip_add: registered GPIOs 32 to 63 on device: gpio
[    0.153969] gpiochip_add: registered GPIOs 64 to 95 on device: gpio
[    0.155204] gpiochip_add: registered GPIOs 96 to 127 on device: gpio
[    0.164170] omap-gpmc 50000000.gpmc: could not find pctldev for node /pinmux@44e10800/nandflash_pins_default, deferring probe
[    0.164205] platform 50000000.gpmc: Driver omap-gpmc requests probe deferral
[    0.164705] platform 56000000.sgx: FIXME: clock-name 'fck' DOES NOT exist in dt!
[    0.168238] DSS not supported on this SoC
[    0.168257] No ATAGs?
[    0.168271] hw-breakpoint: debug architecture 0x4 unsupported.
[    0.203736] bio: create slab <bio-0> at 0
[    0.222625] edma-dma-engine edma-dma-engine.0: TI EDMA DMA engine driver
[    0.223299] of_get_named_gpio_flags: can't parse gpios property of node '/fixedregulator@0[0]'
[    0.223646] vbat: 5000 mV 
[    0.223819] of_get_named_gpio_flags exited with status 117
[    0.224225] wlan-en-regulator: 1800 mV 
[    0.228039] vgaarb: loaded
[    0.229585] SCSI subsystem initialized
[    0.230378] libata version 3.00 loaded.
[    0.231418] usbcore: registered new interface driver usbfs
[    0.231650] usbcore: registered new interface driver hub
[    0.231907] usbcore: registered new device driver usb
[    0.233103] omap_i2c 44e0b000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c0_pins, deferring probe
[    0.233136] platform 44e0b000.i2c: Driver omap_i2c requests probe deferral
[    0.233166] omap_i2c 4802a000.i2c: could not find pctldev for node /pinmux@44e10800/pinmux_i2c1_pins, deferring probe
[    0.233184] platform 4802a000.i2c: Driver omap_i2c requests probe deferral
[    0.233466] media: Linux media interface: v0.10
[    0.233699] Linux video capture interface: v2.00
[    0.234054] pps_core: LinuxPPS API ver. 1 registered
[    0.234066] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.234242] PTP clock support registered
[    0.237537] Switched to clocksource timer1
[    0.261596] NET: Registered protocol family 2
[    0.262311] TCP established hash table entries: 4096 (order: 3, 32768 bytes)
[    0.262419] TCP bind hash table entries: 4096 (order: 2, 16384 bytes)
[    0.262481] TCP: Hash tables configured (established 4096 bind 4096)
[    0.262554] TCP: reno registered
[    0.262570] UDP hash table entries: 256 (order: 0, 4096 bytes)
[    0.262594] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes)
[    0.262830] NET: Registered protocol family 1
[    0.263284] RPC: Registered named UNIX socket transport module.
[    0.263301] RPC: Registered udp transport module.
[    0.263309] RPC: Registered tcp transport module.
[    0.263317] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.263332] PCI: CLS 0 bytes, default 64
[    0.264394] NetWinder Floating Point Emulator V0.97 (double precision)
[    0.265167] PM: Loading am335x-pm-firmware.bin
[    0.463046] VFS: Disk quotas dquot_6.5.2
[    0.463126] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.463843] NFS: Registering the id_resolver key type
[    0.463945] Key type id_resolver registered
[    0.463957] Key type id_legacy registered
[    0.464003] jffs2: version 2.2. (NAND) (SUMMARY)  \xffffffc2\xffffffa9\xffffffa9 2001-2006 Red Hat, Inc.
[    0.464414] aufs 3.12-20140915
[    0.464447] msgmni has been set to 988
[    0.466630] NET: Registered protocol family 38
[    0.466680] io scheduler noop registered
[    0.466690] io scheduler deadline registered
[    0.466728] io scheduler cfq registered (default)
[    0.469338] pinctrl-single 44e10800.pinmux: 142 pins at pa f9e10800 size 568
[    0.479219] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.482193] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/serial@44e09000[0]'
[    0.482531] 44e09000.serial: ttyO0 at MMIO 0x44e09000 (irq = 88, base_baud = 3000000) is a OMAP UART0
[    1.170336] console [ttyO0] enabled
[    1.174712] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/serial@48022000[0]'
[    1.175045] 48022000.serial: ttyO1 at MMIO 0x48022000 (irq = 89, base_baud = 3000000) is a OMAP UART1
[    1.185424] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/serial@481a6000[0]'
[    1.185746] 481a6000.serial: ttyO3 at MMIO 0x481a6000 (irq = 60, base_baud = 3000000) is a OMAP UART3
[    1.196117] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/serial@481a8000[0]'
[    1.196385] 481a8000.serial: ttyO4 at MMIO 0x481a8000 (irq = 61, base_baud = 3000000) is a OMAP UART4
[    1.207764] omap_rng 48310000.rng: OMAP Random Number Generator ver. 20
[    1.227136] brd: module loaded
[    1.236830] loop: module loaded
[    1.240562] (stk) :sysfs entries created
[    1.244735] (stk) : debugfs entries created 
[    1.254701] mtdoops: mtd device (mtddev=name/number) must be supplied
[    1.264093] edma-dma-engine edma-dma-engine.0: allocated channel for 0:43
[    1.271365] edma-dma-engine edma-dma-engine.0: allocated channel for 0:42
[    1.285134] usbcore: registered new interface driver asix
[    1.291163] usbcore: registered new interface driver ax88179_178a
[    1.297855] usbcore: registered new interface driver cdc_ether
[    1.304271] usbcore: registered new interface driver r815x
[    1.310286] usbcore: registered new interface driver smsc95xx
[    1.316594] usbcore: registered new interface driver net1080
[    1.322761] usbcore: registered new interface driver cdc_subset
[    1.329240] usbcore: registered new interface driver zaurus
[    1.335436] usbcore: registered new interface driver cdc_ncm
[    1.342034] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    1.348960] ehci-pci: EHCI PCI platform driver
[    1.353918] ehci-omap: OMAP-EHCI Host Controller driver
[    1.360596] usbcore: registered new interface driver cdc_wdm
[    1.366843] usbcore: registered new interface driver usb-storage
[    1.374495] mousedev: PS/2 mouse device common for all mice
[    1.382728] input: ti-tsc as /devices/ocp.2/44e0d000.tscadc/TI-am335x-tsc/input/input0
[    1.393474] i2c /dev entries driver
[    1.397930] Driver for 1-wire Dallas network protocol.
[    1.406070] omap_wdt: OMAP Watchdog Timer Rev 0x01: initial timeout 60 sec
[    1.414520] device-mapper: ioctl: 4.26.0-ioctl (2013-08-15) initialised: dm-devel@redhat.com
[    1.424901] of_get_named_gpio_flags exited with status 60
[    1.424921] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@48060000[0]'
[    1.425239] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    1.432592] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    1.439832] omap_hsmmc 48060000.mmc: unable to get vmmc regulator -517
[    1.446749] edma-dma-engine edma-dma-engine.0: freeing channel for 24
[    1.453574] edma-dma-engine edma-dma-engine.0: freeing channel for 25
[    1.463629] omap_hwmod: gpio2: _wait_target_disable failed
[    1.469504] platform 48060000.mmc: Driver omap_hsmmc requests probe deferral
[    1.476999] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@481d8000[0]'
[    1.477011] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@481d8000[0]'
[    1.477168] edma-dma-engine edma-dma-engine.0: allocated channel for 0:3
[    1.484307] edma-dma-engine edma-dma-engine.0: allocated channel for 0:2
[    1.599629] ledtrig-cpu: registered to indicate activity on CPUs
[    1.606341] edma-dma-engine edma-dma-engine.0: allocated channel for 0:36
[    1.615714] omap-sham 53100000.sham: hw accel on OMAP rev 4.3
[    1.622192] mmc0: card claims to support voltages below the defined range. These will be ignored.
[    1.632901] omap-aes 53500000.aes: OMAP AES hw accel rev: 3.2
[    1.639149] edma-dma-engine edma-dma-engine.0: allocated channel for 0:5
[    1.646272] edma-dma-engine edma-dma-engine.0: allocated channel for 0:6
[    1.655266] usbcore: registered new interface driver usbhid
[    1.661198] usbhid: USB HID core driver
[    1.668433] oprofile: no performance counters
[    1.673608] oprofile: using timer interrupt.
[    1.678370] nf_conntrack version 0.5.0 (7907 buckets, 31628 max)
[    1.685474] ip_tables: (C) 2000-2006 Netfilter Core Team
[    1.691286] TCP: cubic registered
[    1.694821] Initializing XFRM netlink socket
[    1.699399] NET: Registered protocol family 17
[    1.704143] NET: Registered protocol family 15
[    1.709000] Bridge firewalling registered
[    1.713328] 8021q: 802.1Q VLAN Support v1.8
[    1.718600] mmc0: queuing unknown CIS tuple 0x91 (3 bytes)
[    1.724468] Key type dns_resolver registered
[    1.729959] mmc0: new high speed SDIO card at address 0001
[    1.736625] cpu cpu0: cpu0 regulator not ready, retry
[    1.743416] platform cpufreq-cpu0.0: Driver cpufreq-cpu0 requests probe deferral
[    1.752285] ThumbEE CPU extension supported.
[    1.758032] registered taskstats version 1
[    1.763437] omap-gpmc 50000000.gpmc: GPMC revision 6.0
[    1.768928] gpmc_mem_init: disabling cs 0 mapped at 0x0-0x1000000
[    1.776506] ONFI param page 0 valid
[    1.780244] ONFI flash detected
[    1.783570] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xf1 (Micron MT29F1G08ABADAWP), 128MiB, page size: 2048, OOB size: 64
[    1.795601] omap2-nand: detected x8 NAND flash
[    1.800302] nand: using OMAP_ECC_BCH8_CODE_HW ECC scheme
[    1.805933] omap2-nand: using custom ecc layout
[    1.810905] 10 ofpart partitions found on MTD device omap2-nand.0
[    1.817335] Creating 10 MTD partitions on "omap2-nand.0":
[    1.823060] 0x000000000000-0x000000020000 : "NAND.SPL"
[    1.830493] 0x000000020000-0x000000040000 : "NAND.SPL.backup1"
[    1.838462] 0x000000040000-0x000000060000 : "NAND.SPL.backup2"
[    1.846365] 0x000000060000-0x000000080000 : "NAND.SPL.backup3"
[    1.854443] 0x000000080000-0x0000000c0000 : "NAND.u-boot-spl-os"
[    1.862681] 0x0000000c0000-0x0000001c0000 : "NAND.u-boot"
[    1.870814] 0x0000001c0000-0x0000001e0000 : "NAND.u-boot-env"
[    1.878592] 0x0000001e0000-0x000000200000 : "NAND.u-boot-env.backup1"
[    1.887047] 0x000000200000-0x000000a00000 : "NAND.kernel"
[    1.901021] 0x000000a00000-0x000010000000 : "NAND.file-system"
[    1.907185] mtd: partition "NAND.file-system" extends beyond the end of device "omap2-nand.0" -- size truncated to 0x7600000
[    2.019987] omap_i2c 44e0b000.i2c: bus 0 rev0.11 at 400 kHz
[    2.027999] tps65910 1-002d: No interrupt support, no core IRQ
[    2.038687] vrtc: 1800 mV 
[    2.042128] vrtc: supplied by vbat
[    2.048899] vio: at 1500 mV 
[    2.052022] vio: supplied by vbat
[    2.059427] vdd_mpu: 912 <--> 1375 mV at 1137 mV 
[    2.064494] vdd_mpu: supplied by vbat
[    2.072035] vdd_core: 912 <--> 1150 mV at 1137 mV 
[    2.077176] vdd_core: supplied by vbat
[    2.084166] vdd3: 5000 mV 
[    2.090127] vdig1: at 1800 mV 
[    2.093435] vdig1: supplied by vbat
[    2.100226] vdig2: at 1800 mV 
[    2.103527] vdig2: supplied by vbat
[    2.110367] vpll: at 1800 mV 
[    2.113585] vpll: supplied by vbat
[    2.120265] vdac: at 1800 mV 
[    2.123472] vdac: supplied by vbat
[    2.130169] vaux1: at 1800 mV 
[    2.133470] vaux1: supplied by vbat
[    2.140260] vaux2: at 3300 mV 
[    2.143560] vaux2: supplied by vbat
[    2.150384] vaux33: at 3300 mV 
[    2.153767] vaux33: supplied by vbat
[    2.160677] vmmc: 1800 <--> 3300 mV at 3300 mV 
[    2.165536] vmmc: supplied by vbat
[    2.181019] tps65910-rtc tps65910-rtc: rtc core: registered tps65910-rtc as rtc0
[    2.190582] omap_i2c 4802a000.i2c: bus 1 rev0.11 at 100 kHz
[    2.197105] of_get_named_gpio_flags exited with status 60
[    2.197123] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/mmc@48060000[0]'
[    2.197464] edma-dma-engine edma-dma-engine.0: allocated channel for 0:25
[    2.204726] edma-dma-engine edma-dma-engine.0: allocated channel for 0:24
[    2.317567] davinci_mdio 4a101000.mdio: davinci mdio revision 1.6
[    2.324014] davinci_mdio 4a101000.mdio: no live phy, scanning all
[    2.330972] davinci_mdio: probe of 4a101000.mdio failed with error -5
[    2.338891] Missing dual_emac_res_vlan in DT.
[    2.343516] Using 1 as Reserved VLAN for 0 slave
[    2.348454] Missing dual_emac_res_vlan in DT.
[    2.353049] Using 2 as Reserved VLAN for 1 slave
[    2.357936] Detected MACID = d0:ff:50:92:78:d7
[    2.377819] cpsw: Detected MACID = d0:ff:50:92:78:d9
[    2.388116] tps65910-rtc tps65910-rtc: setting system clock to 2000-01-01 00:00:00 UTC (946684800)
[    2.397642] mmc1: host does not support reading read-only switch. assuming write-enable.
[    2.410090] Waiting for root device /dev/mmcblk0p2...
[    2.415635] mmc1: new high speed SDHC card at address aaaa
[    2.422395] mmcblk0: mmc1:aaaa SS04G 3.69 GiB 
[    2.428985]  mmcblk0: p1 p2 p3 p4
[    2.532076] EXT4-fs (mmcblk0p2): mounted filesystem with ordered data mode. Opts: (null)
[    2.540749] VFS: Mounted root (ext4 filesystem) readonly on device 179:2.
[    2.550735] devtmpfs: mounted
[    2.554438] Freeing unused kernel memory: 344K (c0808000 - c085e000)
[    3.237267] init: plymouth-upstart-bridge main process (882) terminated with status 1
[    3.272446] init: plymouth-upstart-bridge main process ended, respawning
[    3.394303] init: plymouth-upstart-bridge main process (892) terminated with status 1
[    3.402760] init: plymouth-upstart-bridge main process ended, respawning
[    3.418550] init: ureadahead main process (885) terminated with status 5
[    3.501583] init: plymouth-upstart-bridge main process (897) terminated with status 1
[    3.510192] init: plymouth-upstart-bridge main process ended, respawning
[    6.587338] systemd-udevd[1037]: starting version 204
[    7.067926] GestIC: registered; TS pinmux = 0037; MCLR pinmux = 0027
[    7.221023] Bluetooth: Core ver 2.16
[    7.236495] NET: Registered protocol family 31
[    7.236525] Bluetooth: HCI device and connection manager initialized
[    7.236578] Bluetooth: HCI socket layer initialized
[    7.236596] Bluetooth: L2CAP socket layer initialized
[    7.236649] Bluetooth: SCO socket layer initialized
[    7.259397] hdev ddcbf000
[    7.292971] HCI device registered (hdev ddcbf000)
[    7.298422] hci0 ddcbf000
[    7.298452] (stc):  chnl_id list empty :4 
[    7.298463] (stk) : st_kim_start<3>[    7.408213] PM: request_firmware failed
[    7.613809] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/usb@47400000/usb-phy@47401300[0]'
[    7.637276] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/usb@47400000/usb-phy@47401b00[0]'
[    7.788594] musb-hdrc musb-hdrc.0.auto: Enabled SW babble control
[    7.788641] musb-hdrc musb-hdrc.0.auto: No DMA interrupt line!
[    7.794811] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    7.794825] musb-hdrc: MHDRC RTL version 2.0 
[    7.794835] musb-hdrc: setup fifo_mode 4
[    7.794856] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    7.794966] musb-hdrc musb-hdrc.0.auto: MUSB HDRC host driver
[    7.852152] musb-hdrc musb-hdrc.0.auto: new USB bus registered, assigned bus number 1
[    7.852405] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[    7.852423] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.852437] usb usb1: Product: MUSB HDRC host driver
[    7.852450] usb usb1: Manufacturer: Linux 3.12.10-ninja-spheramid-dev201510210722 musb-hcd
[    7.852463] usb usb1: SerialNumber: musb-hdrc.0.auto
[    7.879237] hub 1-0:1.0: USB hub found
[    7.879345] hub 1-0:1.0: 1 port detected
[    7.896645] musb-hdrc musb-hdrc.1.auto: Enabled SW babble control
[    7.896694] musb-hdrc musb-hdrc.1.auto: No DMA interrupt line!
[    7.902996] musb-hdrc: ConfigData=0xde (UTMI-8, dyn FIFOs, bulk combine, bulk split, HB-ISO Rx, HB-ISO Tx, SoftConn)
[    7.903011] musb-hdrc: MHDRC RTL version 2.0 
[    7.903021] musb-hdrc: setup fifo_mode 4
[    7.903043] musb-hdrc: 28/31 max ep, 16384/16384 memory
[    7.926511] musb-hdrc musb-hdrc.1.auto: MUSB HDRC host driver
[    7.951158] musb-hdrc musb-hdrc.1.auto: new USB bus registered, assigned bus number 2
[    7.951440] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[    7.951457] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    7.951471] usb usb2: Product: MUSB HDRC host driver
[    7.951484] usb usb2: Manufacturer: Linux 3.12.10-ninja-spheramid-dev201510210722 musb-hcd
[    7.951497] usb usb2: SerialNumber: musb-hdrc.1.auto
[    7.989859] hub 2-0:1.0: USB hub found
[    7.990138] hub 2-0:1.0: 1 port detected
[    8.012508] of_get_named_gpio_flags: can't parse gpios property of node '/ocp/i2c@4802a000/tlv320aic3106@1b[0]'
[    8.016321] ctw6120_tsc: probe of 1-0038 failed with error -5
[    8.327778] usb 1-1: new high-speed USB device number 2 using musb-hdrc
[    7.403177] (stk) :ldisc_install = 1
[    8.397668] (stk) :ldisc installation timeout<6>[    8.750647] davinci_evm sound.3:  tlv320aic3x-hifi <-> 48038000.mcasp mapping ok
[    8.876835] usb 1-1: New USB device found, idVendor=2001, idProduct=4a00
[    8.876865] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[    8.876879] usb 1-1: Product: D-Link DUB-1312
[    8.876892] usb 1-1: Manufacturer: D-Link Elec. Corp.
[    8.876904] usb 1-1: SerialNumber: 000000000002EE
[    9.293504] ax88179_178a 1-1:1.0 eth2: register 'ax88179_178a' at usb-musb-hdrc.0.auto-1, D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter, 54:b8:0a:ef:f3:c8
[    8.402111] (stk) :ldisc_install = 0
[    9.397657] (stk) : timed out waiting for ldisc to be un-installed<6>[   10.232743] cfg80211: Calling CRDA to update world regulatory domain
[    9.510689] (stk) :ldisc_install = 1
[   10.507640] (stk) :ldisc installation timeout<6>[   10.653503] cfg80211: World regulatory domain updated:
[   10.653509] cfg80211:   (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[   10.653527] cfg80211:   (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.653534] cfg80211:   (2457000 KHz - 2482000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.653541] cfg80211:   (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[   10.653547] cfg80211:   (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.653553] cfg80211:   (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[   10.512113] (stk) :ldisc_install = 0
[   11.507639] (stk) : timed out waiting for ldisc to be un-installed<6>[   12.232794] wlcore: wl18xx HW: 183x or 180x, PG 2.2 (ROM 0x11)
[   12.311552] wlcore: loaded
[   12.311610] wlcore: driver version: 
[   12.311620] wlcore: compilation time: Wed Oct 21 07:41:53 2015
[   11.620708] (stk) :ldisc_install = 1
[   12.617622] (stk) :ldisc installation timeout(stk) :ldisc_install = 0
[   13.617637] (stk) : timed out waiting for ldisc to be un-installed(stk) :ldisc_install = 1
[   14.727677] (stk) :ldisc installation timeout(stk) :ldisc_install = 0
[   15.727679] (stk) : timed out waiting for ldisc to be un-installed(stk) :ldisc_install = 1
[   16.837646] (stk) :ldisc installation timeout(stk) :ldisc_install = 0
[   17.837695] (stk) : timed out waiting for ldisc to be un-installed<6>[   18.120210] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[   18.120290] Bluetooth: BNEP socket layer initialized
[   18.371228] Bluetooth: RFCOMM socket layer initialized
[   18.371263] Bluetooth: RFCOMM ver 1.11
[   17.950748] (stk) :ldisc_install = 1
[   18.947650] (stk) :ldisc installation timeout(stk) :ldisc_install = 0
[   19.947671] (stk) : timed out waiting for ldisc to be un-installed<3>[   19.956046] Bluetooth: st_register failed -22
[   22.644223] net eth1: initializing cpsw version 1.12 (0)
[   22.646936] libphy: PHY 4a101000.mdio:07 not found
[   22.652042] net eth1: phy 4a101000.mdio:07 not found on slave 1
[   22.886918] 8021q: adding VLAN 0 to HW filter on device eth1
[   22.887436] net eth0: initializing cpsw version 1.12 (0)
[   22.890221] libphy: PHY 4a101000.mdio:01 not found
[   22.895308] net eth0: phy 4a101000.mdio:01 not found on slave 0
[   22.976711] 8021q: adding VLAN 0 to HW filter on device eth0
[   24.548969] init: sphere-ui main process (2047) terminated with status 1
[   24.549092] init: sphere-ui main process ended, respawning
[   25.231515] ax88179_178a 1-1:1.0 eth2: ax88179 - Link status is: 1
[   25.705780] init: avahi-cups-reload main process (2062) terminated with status 1
[   26.689805] init: sphere-ui main process (2285) terminated with status 1
[   26.689925] init: sphere-ui main process ended, respawning
[   27.881089] wlcore: PHY firmware version: Rev 8.2.0.0.195
[   27.932157] wlcore: firmware booted (Rev 8.8.0.0.13)
[   28.606018] wlcore: down
[   29.218026] wlcore: PHY firmware version: Rev 8.2.0.0.195
[   29.300141] wlcore: firmware booted (Rev 8.8.0.0.13)
[   30.125976] init: sphere-ui main process (2422) terminated with status 1
[   30.126105] init: sphere-ui main process ended, respawning
[   31.008723] wlcore: down
[   38.554764] udc musb-hdrc.1.auto: registering UDC driver [g_serial]
[   38.692114] userial_init: registered 4 ttyGS* devices
[   38.729433] g_serial gadget: adding 'acm'/db1f1780 to config 'CDC ACM config'/bf26a338
[   38.729499] g_serial gadget: acm ttyGS0: dual speed IN/ep1in OUT/ep1out NOTIFY/ep2in
[   38.729528] g_serial gadget: Gadget Serial v2.4
[   38.729540] g_serial gadget: g_serial ready
[   38.867287] init: plymouth-upstart-bridge main process ended, respawning
[   39.117506] gs_open: ttyGS0 (ddf8ba00,ddcbc8c0)
[   39.147865] gs_close: ttyGS0 (ddf8ba00,ddcbc8c0) ...
[   39.147898] gs_close: ttyGS0 (ddf8ba00,ddcbc8c0) done!
[   39.148226] gs_open: ttyGS0 (ddf8ba00,ddcbc8c0)
[   46.903276] init: mqtt-bridgeify main process (2468) terminated with status 1
[   46.903419] init: mqtt-bridgeify main process ended, respawning
[   52.171046] 2015-11-06T00:35:51: Downloaded recovery script.
[   52.993532] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   53.587792] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[   55.595947] 2015-11-06T00:35:54: Running updates...
[   55.904030] init: avahi-cups-reload main process (3846) terminated with status 1
[   60.113876] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[  155.334788] init: plymouth-stop pre-start process (6304) terminated with status 1
[  636.720686] wlcore: WARNING Unable to flush all TX buffers, timed out (timeout 500 ms
[  726.392273] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[ 1233.239876] wlcore: WARNING Unable to flush all TX buffers, timed out (timeout 500 ms
[ 1233.750017] wlcore: WARNING Unable to flush all TX buffers, timed out (timeout 500 ms
[ 2433.308249] wlcore: WARNING Unable to flush all TX buffers, timed out (timeout 500 ms
[ 2433.818223] wlcore: WARNING Unable to flush all TX buffers, timed out (timeout 500 ms
[ 3033.332198] wlcore: WARNING Unable to flush all TX buffers, timed out (timeout 500 ms
[ 3033.841971] wlcore: WARNING Unable to flush all TX buffers, timed out (timeout 500 ms
[13220.083013] init: ninja-scriptrock-signal pre-start process (9200) terminated with status 1
[17325.121627] init: hems-call-home main process (2054) terminated with status 1
[17325.121831] init: hems-call-home main process ended, respawning
[28131.282357] init: hems-call-home main process (4325) terminated with status 1
[28131.282475] init: hems-call-home main process ended, respawning
[28349.710114] init: mqtt-bridgeify main process (3614) terminated with status 2
[28349.710314] init: mqtt-bridgeify main process ended, respawning
[36416.232349] init: hems-call-home main process (20231) terminated with status 1
[36416.232471] init: hems-call-home main process ended, respawning
[36611.387219] init: mqtt-bridgeify main process (25288) terminated with status 2
[36611.387335] init: mqtt-bridgeify main process ended, respawning
[99566.383801] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[99613.509581] init: hems-call-home main process (12051) killed by TERM signal
[99614.754812] init: hems-dup-udp main process (2041) killed by TERM signal
[99641.034333] init: ninja-scriptrock-signal pre-start process (26156) terminated with status 1
[185485.539206] init: ninja-scriptrock-signal pre-start process (27021) terminated with status 1
[273031.761205] init: ninja-scriptrock-signal pre-start process (14042) terminated with status 1
[319005.639236] init: hems-call-home main process (25118) terminated with status 1
[319005.640911] init: hems-call-home main process ended, respawning
[319010.868561] init: hems-call-home main process (12004) terminated with status 1
[319010.868684] init: hems-call-home main process ended, respawning
[319071.761129] init: hems-call-home main process (12235) terminated with status 1
[319071.761252] init: hems-call-home main process ended, respawning
[320687.243756] init: mqtt-bridgeify main process (17788) terminated with status 2
[359093.812526] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[359155.216783] init: ninja-scriptrock-signal pre-start process (22977) terminated with status 1
[442524.270247] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[442581.259370] init: ninja-scriptrock-signal pre-start process (21869) terminated with status 1
[490982.051877] device eth0 entered promiscuous mode
[490984.568156] device eth0 left promiscuous mode
[490994.333180] device wlan0 entered promiscuous mode
[491003.163549] device wlan0 left promiscuous mode
[491052.892377] device wlan0 entered promiscuous mode
[491102.711835] device wlan0 left promiscuous mode
[491105.514035] device wlan0 entered promiscuous mode
[491149.339473] device wlan0 left promiscuous mode
[491173.258566] device eth2 entered promiscuous mode
[491193.095697] device eth2 left promiscuous mode
[491201.991452] device eth2 entered promiscuous mode
[491269.708971] device eth2 left promiscuous mode
[525306.373212] init: hems-call-home main process (14165) killed by TERM signal
[525308.332487] init: hems-dup-udp main process (25185) killed by TERM signal
[529216.712869] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[529257.527254] init: hems-call-home main process (12302) killed by TERM signal
[529259.151912] init: hems-dup-udp main process (12425) killed by TERM signal
[529281.608162] init: ninja-scriptrock-signal pre-start process (12892) terminated with status 1
[616045.517701] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[616108.761703] init: ninja-scriptrock-signal pre-start process (7329) terminated with status 1
[694112.112998] init: hems-call-home main process (12087) terminated with status 1
[694112.113121] init: hems-call-home main process ended, respawning
[694127.109541] init: hems-call-home main process (6011) terminated with status 1
[694127.109661] init: hems-call-home main process ended, respawning
[694164.813001] init: hems-call-home main process (6558) terminated with status 1
[694164.813124] init: hems-call-home main process ended, respawning
[694192.994674] init: hems-call-home main process (7902) terminated with status 1
[694192.994794] init: hems-call-home main process ended, respawning
[694215.546590] init: hems-call-home main process (8921) terminated with status 1
[694215.546797] init: hems-call-home main process ended, respawning
[694222.043556] init: hems-call-home main process (9675) terminated with status 1
[694222.043675] init: hems-call-home main process ended, respawning
[694248.439637] init: hems-call-home main process (9947) terminated with status 1
[694248.439764] init: hems-call-home main process ended, respawning
[694269.300974] init: hems-call-home main process (10922) terminated with status 1
[694269.301097] init: hems-call-home main process ended, respawning
[694295.689379] init: hems-call-home main process (11665) terminated with status 1
[694295.689584] init: hems-call-home main process ended, respawning
[694306.631468] init: hems-call-home main process (12600) terminated with status 1
[694306.631588] init: hems-call-home main process ended, respawning
[694346.817689] init: hems-call-home main process (13011) terminated with status 1
[694346.818362] init: hems-call-home main process ended, respawning
[694370.674631] init: hems-call-home main process (14348) terminated with status 1
[694370.674847] init: hems-call-home main process ended, respawning
[694416.789687] init: hems-call-home main process (15189) terminated with status 1
[694416.789897] init: hems-call-home main process ended, respawning
[694427.201359] init: hems-call-home main process (16735) terminated with status 1
[694427.201485] init: hems-call-home main process ended, respawning
[694449.312840] init: hems-call-home main process (17137) terminated with status 1
[694449.312965] init: hems-call-home main process ended, respawning
[694465.058165] init: hems-call-home main process (17963) terminated with status 1
[694465.058284] init: hems-call-home main process ended, respawning
[694511.959555] init: hems-call-home main process (18534) terminated with status 1
[694511.959671] init: hems-call-home main process ended, respawning
[694535.850787] init: hems-call-home main process (20078) terminated with status 1
[694535.850910] init: hems-call-home main process ended, respawning
[694590.239666] init: hems-call-home main process (20930) terminated with status 1
[694590.239792] init: hems-call-home main process ended, respawning
[694626.519217] init: hems-call-home main process (22794) terminated with status 1
[694626.519338] init: hems-call-home main process ended, respawning
[694681.750955] init: hems-call-home main process (24049) terminated with status 1
[694681.751080] init: hems-call-home main process ended, respawning
[694711.374350] init: hems-call-home main process (25908) terminated with status 1
[694711.374554] init: hems-call-home main process ended, respawning
[694718.711944] init: hems-call-home main process (26932) terminated with status 1
[694718.712154] init: hems-call-home main process ended, respawning
[694725.851570] init: hems-call-home main process (27255) terminated with status 1
[694725.851779] init: hems-call-home main process ended, respawning
[694748.335919] init: hems-call-home main process (27520) terminated with status 1
[694748.336042] init: hems-call-home main process ended, respawning
[694761.043176] init: hems-call-home main process (28316) terminated with status 1
[694761.043298] init: hems-call-home main process ended, respawning
[694815.097797] init: hems-call-home main process (28668) terminated with status 1
[694815.097915] init: hems-call-home main process ended, respawning
[694849.025373] init: hems-call-home main process (30409) terminated with status 1
[694849.025494] init: hems-call-home main process ended, respawning
[694855.318119] init: hems-call-home main process (31591) terminated with status 1
[694855.318327] init: hems-call-home main process ended, respawning
[694916.730738] init: hems-call-home main process (31846) terminated with status 1
[694916.730857] init: hems-call-home main process ended, respawning
[695296.300541] init: mqtt-bridgeify main process (31770) terminated with status 2
[702639.310012] init: ninja-scriptrock-signal pre-start process (25474) terminated with status 1
[725672.064279] init: hems-call-home main process (1443) terminated with status 1
[725672.064402] init: hems-call-home main process ended, respawning
[725784.028809] init: mqtt-bridgeify main process (14182) terminated with status 2
[725784.028926] init: mqtt-bridgeify main process ended, respawning
[727448.077345] ax88179_178a 1-1:1.0 eth2: ax88179 - Link status is: 0
[727483.846430] ax88179_178a 1-1:1.0 eth2: ax88179 - Link status is: 1
[789699.801800] init: ninja-scriptrock-signal pre-start process (24932) terminated with status 1
[804325.480602] init: hems-call-home main process (25183) terminated with status 1
[804325.480725] init: hems-call-home main process ended, respawning
[856269.962115] wlcore: WARNING Unable to flush all TX buffers, timed out (timeout 500 ms
[856270.472185] wlcore: WARNING Unable to flush all TX buffers, timed out (timeout 500 ms
[874990.824724] EXT4-fs (mmcblk0p2): re-mounted. Opts: (null)
[875048.231638] init: hems-call-home main process (4077) killed by TERM signal
[875050.494774] init: hems-dup-udp main process (12129) killed by TERM signal
[875053.039414] init: mqtt-bridgeify main process (28805) terminated with status 2
[875077.932563] init: ninja-scriptrock-signal pre-start process (1048) terminated with status 1
[886592.657224] device wlan0 entered promiscuous mode
[886641.715957] device wlan0 left promiscuous mode
[886691.762807] device eth2 entered promiscuous mode
[886733.581256] device eth2 left promiscuous mode
[886745.101954] device wlan0 entered promiscuous mode
[886751.956109] device wlan0 left promiscuous mode