Created
March 18, 2012 00:37
-
-
Save jordan-thoms/2067077 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
| smartctl 5.40 2010-10-16 r3189 [i686-pc-linux-gnu] (local build) | |
| Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net | |
| === START OF INFORMATION SECTION === | |
| Model Family: Western Digital Caviar Green family | |
| Device Model: WDC WD15EADS-00P8B0 | |
| Serial Number: WD-WCAVU0228059 | |
| Firmware Version: 01.00A01 | |
| User Capacity: 1,500,301,910,016 bytes | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: 8 | |
| ATA Standard is: Exact ATA specification draft version not indicated | |
| Local Time is: Sun Mar 18 13:35:20 2012 NZDT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x84) Offline data collection activity | |
| was suspended by an interrupting command from host. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: (35700) seconds. | |
| Offline data collection | |
| capabilities: (0x7b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 255) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 5) minutes. | |
| SCT capabilities: (0x303f) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 2 | |
| 3 Spin_Up_Time 0x0027 181 177 021 Pre-fail Always - 5941 | |
| 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 66 | |
| 5 Reallocated_Sector_Ct 0x0033 196 196 140 Pre-fail Always - 25 | |
| 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
| 9 Power_On_Hours 0x0032 072 072 000 Old_age Always - 20459 | |
| 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
| 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 64 | |
| 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 70 | |
| 193 Load_Cycle_Count 0x0032 180 180 000 Old_age Always - 62093 | |
| 194 Temperature_Celsius 0x0022 113 106 000 Old_age Always - 37 | |
| 196 Reallocated_Event_Count 0x0032 175 175 000 Old_age Always - 25 | |
| 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 37 | |
| 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 7 | |
| 200 Multi_Zone_Error_Rate 0x0008 182 175 000 Old_age Offline - 3752 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Completed without error 00% 8319 - | |
| # 2 Extended offline Completed without error 00% 8153 - | |
| # 3 Extended offline Completed without error 00% 7987 - | |
| # 4 Extended offline Completed without error 00% 7821 - | |
| # 5 Extended offline Completed without error 00% 7656 - | |
| # 6 Extended offline Completed without error 00% 7491 - | |
| # 7 Extended offline Completed without error 00% 7325 - | |
| # 8 Extended offline Completed without error 00% 7159 - | |
| # 9 Extended offline Completed without error 00% 6993 - | |
| #10 Extended offline Completed without error 00% 6827 - | |
| #11 Extended offline Completed without error 00% 6661 - | |
| #12 Extended offline Completed without error 00% 6495 - | |
| #13 Extended offline Completed without error 00% 6330 - | |
| #14 Extended offline Completed without error 00% 6164 - | |
| #15 Extended offline Completed without error 00% 5998 - | |
| #16 Extended offline Completed without error 00% 5835 - | |
| #17 Extended offline Completed without error 00% 5669 - | |
| #18 Extended offline Completed without error 00% 5503 - | |
| #19 Extended offline Completed without error 00% 5337 - | |
| #20 Extended offline Completed without error 00% 5171 - | |
| #21 Extended offline Completed without error 00% 5006 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| smartctl 5.40 2010-10-16 r3189 [i686-pc-linux-gnu] (local build) | |
| Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net | |
| === START OF INFORMATION SECTION === | |
| Model Family: Western Digital Caviar Green family | |
| Device Model: WDC WD15EADS-00P8B0 | |
| Serial Number: WD-WCAVU0228059 | |
| Firmware Version: 01.00A01 | |
| User Capacity: 1,500,301,910,016 bytes | |
| Device is: In smartctl database [for details use: -P show] | |
| ATA Version is: 8 | |
| ATA Standard is: Exact ATA specification draft version not indicated | |
| Local Time is: Sun Mar 18 13:35:20 2012 NZDT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x84) Offline data collection activity | |
| was suspended by an interrupting command from host. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: (35700) seconds. | |
| Offline data collection | |
| capabilities: (0x7b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 255) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 5) minutes. | |
| SCT capabilities: (0x303f) SCT Status supported. | |
| SCT Error Recovery Control supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 2 | |
| 3 Spin_Up_Time 0x0027 181 177 021 Pre-fail Always - 5941 | |
| 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 66 | |
| 5 Reallocated_Sector_Ct 0x0033 196 196 140 Pre-fail Always - 25 | |
| 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
| 9 Power_On_Hours 0x0032 072 072 000 Old_age Always - 20459 | |
| 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
| 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 64 | |
| 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 70 | |
| 193 Load_Cycle_Count 0x0032 180 180 000 Old_age Always - 62093 | |
| 194 Temperature_Celsius 0x0022 113 106 000 Old_age Always - 37 | |
| 196 Reallocated_Event_Count 0x0032 175 175 000 Old_age Always - 25 | |
| 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 37 | |
| 198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 7 | |
| 200 Multi_Zone_Error_Rate 0x0008 182 175 000 Old_age Offline - 3752 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Extended offline Completed without error 00% 8319 - | |
| # 2 Extended offline Completed without error 00% 8153 - | |
| # 3 Extended offline Completed without error 00% 7987 - | |
| # 4 Extended offline Completed without error 00% 7821 - | |
| # 5 Extended offline Completed without error 00% 7656 - | |
| # 6 Extended offline Completed without error 00% 7491 - | |
| # 7 Extended offline Completed without error 00% 7325 - | |
| # 8 Extended offline Completed without error 00% 7159 - | |
| # 9 Extended offline Completed without error 00% 6993 - | |
| #10 Extended offline Completed without error 00% 6827 - | |
| #11 Extended offline Completed without error 00% 6661 - | |
| #12 Extended offline Completed without error 00% 6495 - | |
| #13 Extended offline Completed without error 00% 6330 - | |
| #14 Extended offline Completed without error 00% 6164 - | |
| #15 Extended offline Completed without error 00% 5998 - | |
| #16 Extended offline Completed without error 00% 5835 - | |
| #17 Extended offline Completed without error 00% 5669 - | |
| #18 Extended offline Completed without error 00% 5503 - | |
| #19 Extended offline Completed without error 00% 5337 - | |
| #20 Extended offline Completed without error 00% 5171 - | |
| #21 Extended offline Completed without error 00% 5006 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. | |
| bender ~ # smartctl --all /dev/sda | |
| smartctl 5.40 2010-10-16 r3189 [i686-pc-linux-gnu] (local build) | |
| Copyright (C) 2002-10 by Bruce Allen, http://smartmontools.sourceforge.net | |
| === START OF INFORMATION SECTION === | |
| Device Model: WDC WD20EARX-00ZUDB0 | |
| Serial Number: WD-WCC1H0388781 | |
| Firmware Version: 80.00A80 | |
| User Capacity: 2,000,398,934,016 bytes | |
| Device is: Not in smartctl database [for details use: -P showall] | |
| ATA Version is: 8 | |
| ATA Standard is: Exact ATA specification draft version not indicated | |
| Local Time is: Sun Mar 18 13:35:58 2012 NZDT | |
| SMART support is: Available - device has SMART capability. | |
| SMART support is: Enabled | |
| === START OF READ SMART DATA SECTION === | |
| SMART overall-health self-assessment test result: PASSED | |
| General SMART Values: | |
| Offline data collection status: (0x80) Offline data collection activity | |
| was never started. | |
| Auto Offline Data Collection: Enabled. | |
| Self-test execution status: ( 0) The previous self-test routine completed | |
| without error or no self-test has ever | |
| been run. | |
| Total time to complete Offline | |
| data collection: (37680) seconds. | |
| Offline data collection | |
| capabilities: (0x7b) SMART execute Offline immediate. | |
| Auto Offline data collection on/off support. | |
| Suspend Offline collection upon new | |
| command. | |
| Offline surface scan supported. | |
| Self-test supported. | |
| Conveyance Self-test supported. | |
| Selective Self-test supported. | |
| SMART capabilities: (0x0003) Saves SMART data before entering | |
| power-saving mode. | |
| Supports SMART auto save timer. | |
| Error logging capability: (0x01) Error logging supported. | |
| General Purpose Logging supported. | |
| Short self-test routine | |
| recommended polling time: ( 2) minutes. | |
| Extended self-test routine | |
| recommended polling time: ( 255) minutes. | |
| Conveyance self-test routine | |
| recommended polling time: ( 5) minutes. | |
| SCT capabilities: (0x3035) SCT Status supported. | |
| SCT Feature Control supported. | |
| SCT Data Table supported. | |
| SMART Attributes Data Structure revision number: 16 | |
| Vendor Specific SMART Attributes with Thresholds: | |
| ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE | |
| 1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always - 0 | |
| 3 Spin_Up_Time 0x0027 230 230 021 Pre-fail Always - 7458 | |
| 4 Start_Stop_Count 0x0032 100 100 000 Old_age Always - 15 | |
| 5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always - 0 | |
| 7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always - 0 | |
| 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 20 | |
| 10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
| 11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always - 0 | |
| 12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always - 13 | |
| 192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always - 10 | |
| 193 Load_Cycle_Count 0x0032 200 200 000 Old_age Always - 353 | |
| 194 Temperature_Celsius 0x0022 115 110 000 Old_age Always - 35 | |
| 196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always - 0 | |
| 197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always - 0 | |
| 198 Offline_Uncorrectable 0x0030 100 253 000 Old_age Offline - 0 | |
| 199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always - 0 | |
| 200 Multi_Zone_Error_Rate 0x0008 100 253 000 Old_age Offline - 0 | |
| SMART Error Log Version: 1 | |
| No Errors Logged | |
| SMART Self-test log structure revision number 1 | |
| Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
| # 1 Short offline Completed without error 00% 0 - | |
| SMART Selective self-test log data structure revision number 1 | |
| SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
| 1 0 0 Not_testing | |
| 2 0 0 Not_testing | |
| 3 0 0 Not_testing | |
| 4 0 0 Not_testing | |
| 5 0 0 Not_testing | |
| Selective self-test flags (0x0): | |
| After scanning selected spans, do NOT read-scan remainder of disk. | |
| If Selective self-test is pending on power-up, resume after 0 minute delay. |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment