netinstall-initramfs-fail.log

U-Boot 2020.04-imx_v2020.04_5.4.24_2.1.0+g4979a99482 (Jan 01 1970 - 00:00:00 +0000)

CPU:   i.MX7D rev1.3 1000 MHz (running at 792 MHz)
CPU:   Commercial temperature grade (0C to 95C) at 40C
Reset cause: POR
Model: i.MX7 SabreSD Board
Board: i.MX7D SABRESD RevC in secure mode
DRAM:  512 MiB
PHY: manual toggle PHY reset GPIO1_09
PMIC: PFUZE3000 DEV_ID=0x30 REV_ID=0x11
NAND:  512 MiB
MMC:   
Loading Environment from NAND... OK
In:    serial
Out:   serial
Err:   serial
Net:   
MAC address in NAND is  d6:59:e6:96:1d:eb
eth0: ethernet@30be0000 [PRIME]
Fastboot: Normal
Normal Boot
Hit any key to stop autoboot:  0 
=> env print -a
baudrate=115200
bootargs=console=ttymxc0,115200 ubi.mtd=rootfs root=ubi0:rootfs rootfstype=ubifs mtdparts=gpmi-nand:8m(boot),2m(uboot_env),1m(sc_default),16m(nandtee),-(rootfs)
bootcmd=env set save_bootargs ${bootargs};ubi part rootfs;ubifsmount ubi0:rootfs;ubifsload ${loadaddr} /boot/loader/uEnv.txt 1024;env import -t ${loadaddr} 1024;env set bootargs ${save_bootargs} ${bootargs};ubifsload ${loadaddr} ${kernel_image};ubifsload ${initrd_addr} ${ramdisk_image};ubifsload ${fdt_addr} ${fdtdir}/imx7d-sdb-gpmi-weim.dtb;ubifsumount;bootz ${loadaddr} ${initrd_addr} ${fdt_addr};
bootcmd_dnld=run dnldmod_args;setenv -f bootfile ${fit_image};setenv -f loadaddr 0x90800000;setenv -f fdt_addr '';setenv -f fdt_high '';setenv -f initrd_high '';setenv -f initrd_addr '';tftpboot;bootm
bootcmd_mfg=run mfgtool_args;if iminfo ${initrd_addr}; then if test ${tee} = yes; then bootm ${tee_addr} ${initrd_addr} ${fdt_addr}; else bootz ${loadaddr} ${initrd_addr} ${fdt_addr}; fi; else echo "Run fastboot ..."; fastboot 0; fi;
bootdelay=3
console=ttymxc0
dnldmod_args=setenv bootargs bootargs debugshell console=ttymxc0,115200 panic=5 root=/dev/ram0 mtdparts=gpmi-nand:8m(boot),2m(uboot_env),1m(sc_default),16m(nandtee),-(rootfs)
emmc_dev=2
ethact=ethernet@30be0000
ethprime=eth0
fdt_addr=0x83000000
fdt_high=0xffffffff
fdtcontroladdr=9df09f18
fit_image=seam/seam-netinstall.img
initrd_addr=0x86800000
initrd_high=0xffffffff
ipaddr=10.33.32.219
kboot=bootz 
loadaddr=0x80800000
mfgtool_args=setenv bootargs console=${console},${baudrate} rdinit=/linuxrc clk_ignore_unused 
mtdparts=mtdparts=gpmi-nand:8m(boot),2m(uboot_env),1m(sc_default),16m(nandtee),-(rootfs)
sd_dev=0
seam_install=0
serial#=00000054cd48126a
serverip=10.33.32.225
soc_type=imx7d
tee=no
tee_addr=0x84000000

Environment size: 1762/131068 bytes
=> run bootcmd_dnld
Using ethernet@30be0000 device
TFTP from server 10.33.32.225; our IP address is 10.33.32.219
Filename 'seam/seam-netinstall.img'.
Load address: 0x90800000
Loading: #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 #################################################################
	 ###############################################
	 7.7 MiB/s
done
Bytes transferred = 48387012 (2e253c4 hex)
## Loading kernel from FIT Image at 90800000 ...
   Using 'conf-imx7d-sdb-gpmi-weim.dtb' configuration
   Verifying Hash Integrity ... OK
   Trying 'kernel-1' kernel subimage
     Description:  Linux kernel
     Type:         Kernel Image
     Compression:  uncompressed
     Data Start:   0x90800100
     Data Size:    22984704 Bytes = 21.9 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: 0x80008000
     Entry Point:  0x80008000
     Hash algo:    sha256
     Hash value:   9ec2cb118acc2976fe3096d4357330cc8540c5f56df018d000d11902c26a20f9
   Verifying Hash Integrity ... sha256+ OK
## Loading ramdisk from FIT Image at 90800000 ...
   Using 'conf-imx7d-sdb-gpmi-weim.dtb' configuration
   Verifying Hash Integrity ... OK
   Trying 'ramdisk-1' ramdisk subimage
     Description:  bantha-netinstall-image
     Type:         RAMDisk Image
     Compression:  uncompressed
     Data Start:   0x91df8230
     Data Size:    25349120 Bytes = 24.2 MiB
     Architecture: ARM
     OS:           Linux
     Load Address: unavailable
     Entry Point:  unavailable
     Hash algo:    sha256
     Hash value:   acea4174e1beba625bab58eb8edc62fd7c3f87e0e8648aca3a0e181cc54e9589
   Verifying Hash Integrity ... sha256+ OK
## Loading fdt from FIT Image at 90800000 ...
   Using 'conf-imx7d-sdb-gpmi-weim.dtb' configuration
   Verifying Hash Integrity ... OK
   Trying 'fdt-imx7d-sdb-gpmi-weim.dtb' fdt subimage
     Description:  Flattened Device Tree blob
     Type:         Flat Device Tree
     Compression:  uncompressed
     Data Start:   0x91deba14
     Data Size:    51024 Bytes = 49.8 KiB
     Architecture: ARM
     Hash algo:    sha256
     Hash value:   41764bc3a6c4a1c7dea04a046470c544e0ccc72a0bd45f0e5b68fce444770f3d
   Verifying Hash Integrity ... sha256+ OK
   Booting using the fdt blob at 0x91deba14
   Loading Kernel Image
   Loading Ramdisk to 9c6dc000, end 9df08c00 ... OK
   Loading Device Tree to 9c6cc000, end 9c6db74f ... OK

Starting kernel ...

[    0.000000] Booting Linux on physical CPU 0x0
[    0.000000] Linux version 5.4.24+g4691ef6d8dd1 (oe-user@oe-host) (gcc version 9.3.0 (GCC)) #1 SMP PREEMPT Tue Jun 29 22:03:30 UTC 2021
[    0.000000] CPU: ARMv7 Processor [410fc075] revision 5 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Freescale i.MX7 SabreSD Board
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] Reserved memory: created CMA memory pool at 0x88000000, size 320 MiB
[    0.000000] OF: reserved mem: initialized node linux,cma, compatible id shared-dma-pool
[    0.000000] percpu: Embedded 15 pages/cpu s32204 r8192 d21044 u61440
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 129920
[    0.000000] Kernel command line: bootargs debugshell console=ttymxc0,115200 panic=5 root=/dev/ram0 mtdparts=gpmi-nand:8m(boot),2m(uboot_env),1m(sc_default),16m(nandtee),-(rootfs)
[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] Memory: 122568K/524288K available (11264K kernel code, 887K rwdata, 4144K rodata, 25600K init, 433K bss, 74040K reserved, 327680K cma-reserved, 0K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=4 to nr_cpu_ids=2.
[    0.000000] 	Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] random: get_random_bytes called from start_kernel+0x2c8/0x488 with crng_init=0
[    0.000000] arch_timer: cp15 timer(s) running at 8.00MHz (phys).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x1d854df40, max_idle_ns: 440795202120 ns
[    0.000007] sched_clock: 56 bits at 8MHz, resolution 125ns, wraps every 2199023255500ns
[    0.000021] Switching to timer-based delay loop, resolution 125ns
[    0.000367] Ignoring duplicate/late registration of read_current_timer delay
[    0.000397] clocksource: mxc_timer1: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 637086815595 ns
[    0.001977] arch_timer: multiple nodes in dt, skipping
[    0.002371] Console: colour dummy device 80x30
[    0.002404] Calibrating delay loop (skipped), value calculated using timer frequency.. 16.00 BogoMIPS (lpj=80000)
[    0.002418] pid_max: default: 32768 minimum: 301
[    0.002590] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.002606] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[    0.003532] CPU: Testing write buffer coherency: ok
[    0.003917] CPU0: update cpu_capacity 1024
[    0.003930] CPU0: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.059949] Setting up static identity map for 0x80100000 - 0x80100060
[    0.079922] rcu: Hierarchical SRCU implementation.
[    0.119977] smp: Bringing up secondary CPUs ...
[    0.200369] CPU1: update cpu_capacity 1024
[    0.200378] CPU1: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.200522] smp: Brought up 1 node, 2 CPUs
[    0.200540] SMP: Total of 2 processors activated (32.00 BogoMIPS).
[    0.200547] CPU: All CPU(s) started in SVC mode.
[    0.200998] devtmpfs: initialized
[    0.220378] VFP support v0.3: implementor 41 architecture 2 part 30 variant 7 rev 5
[    0.220776] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.220800] futex hash table entries: 512 (order: 3, 32768 bytes, linear)
[    0.233562] pinctrl core: initialized pinctrl subsystem
[    0.234791] NET: Registered protocol family 16
[    0.242102] DMA: preallocated 256 KiB pool for atomic coherent allocations
[    0.243414] cpuidle: using governor menu
[    0.249400] vdd1p0d: Bringing 0uV into 800000-800000uV
[    0.253268] DDR type is DDR3!
[    0.264027] No ATAGs?
[    0.264158] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.264176] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.266059] imx7d-pinctrl 302c0000.iomuxc-lpsr: initialized IMX pinctrl driver
[    0.266748] imx7d-pinctrl 30330000.iomuxc: initialized IMX pinctrl driver
[    0.268333] imx mu driver is registered.
[    0.268836] imx rpmsg driver is registered.
[    0.270259] MU is ready for cross core communication!
[    0.308135] regulator-fec2-3v3 GPIO handle specifies active low - ignored
[    0.309438] vgaarb: loaded
[    0.310308] SCSI subsystem initialized
[    0.310958] usbcore: registered new interface driver usbfs
[    0.311025] usbcore: registered new interface driver hub
[    0.311114] usbcore: registered new device driver usb
[    0.311284] usb_phy_generic usbphynop1: usbphynop1 supply vcc not found, using dummy regulator
[    0.311501] usb_phy_generic usbphynop3: usbphynop3 supply vcc not found, using dummy regulator
[    0.311833] usb_phy_generic usbphynop2: usbphynop2 supply vcc not found, using dummy regulator
[    0.313111] i2c i2c-0: IMX I2C adapter registered
[    0.313802] i2c i2c-1: IMX I2C adapter registered
[    0.314588] i2c i2c-2: IMX I2C adapter registered
[    0.315233] i2c i2c-3: IMX I2C adapter registered
[    0.315661] mc: Linux media interface: v0.10
[    0.315709] videodev: Linux video capture interface: v2.00
[    0.315783] pps_core: LinuxPPS API ver. 1 registered
[    0.315792] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.315817] PTP clock support registered
[    0.317140] MIPI CSI2 driver module loaded
[    0.317196] Advanced Linux Sound Architecture Driver Initialized.
[    0.318580] clocksource: Switched to clocksource arch_sys_counter
[    0.318819] VFS: Disk quotas dquot_6.6.0
[    0.318900] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    0.328272] thermal_sys: Registered thermal governor 'step_wise'
[    0.329155] NET: Registered protocol family 2
[    0.329908] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 6144 bytes, linear)
[    0.329946] TCP established hash table entries: 4096 (order: 2, 16384 bytes, linear)
[    0.330000] TCP bind hash table entries: 4096 (order: 3, 32768 bytes, linear)
[    0.330078] TCP: Hash tables configured (established 4096 bind 4096)
[    0.330178] UDP hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.330217] UDP-Lite hash table entries: 256 (order: 1, 8192 bytes, linear)
[    0.330401] NET: Registered protocol family 1
[    0.351040] RPC: Registered named UNIX socket transport module.
[    0.351053] RPC: Registered udp transport module.
[    0.351060] RPC: Registered tcp transport module.
[    0.351067] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.361629] PCI: CLS 0 bytes, default 64
[    0.581000] Trying to unpack rootfs image as initramfs...
[    0.861981] Freeing initrd memory: 24756K
[    0.862633] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    0.864193] Bus freq driver module loaded
[    0.865252] Initialise system trusted keyrings
[    0.865490] workingset: timestamp_bits=14 max_order=17 bucket_order=3
[    0.883312] NFS: Registering the id_resolver key type
[    0.883356] Key type id_resolver registered
[    0.883364] Key type id_legacy registered
[    0.883419] jffs2: version 2.2. (NAND) © 2001-2006 Red Hat, Inc.
[    0.883984] fuse: init (API version 7.31)
[    0.931903] Key type asymmetric registered
[    0.931921] Asymmetric key parser 'x509' registered
[    0.931949] io scheduler mq-deadline registered
[    0.931958] io scheduler kyber registered
[    0.936942] sii902x 2-0039: No reset pin found
[    0.937291] sii902x 2-0039: Sii902x: cound not find device
[    0.943358] imx-sdma 30bd0000.sdma: Direct firmware load for imx/sdma/sdma-imx7d.bin failed with error -2
[    0.943377] imx-sdma 30bd0000.sdma: Falling back to sysfs fallback for: imx/sdma/sdma-imx7d.bin
[    0.945507] mxs-dma 33000000.dma-apbh: initialized
[    0.949555] pfuze100-regulator 0-0008: Full layer: 1, Metal layer: 1
[    0.950223] pfuze100-regulator 0-0008: FAB: 0, FIN: 0
[    0.950237] pfuze100-regulator 0-0008: pfuze3000 found.
[    0.966683] 30860000.serial: ttymxc0 at MMIO 0x30860000 (irq = 51, base_baud = 1500000) is a IMX
[    1.732669] printk: console [ttymxc0] enabled
[    1.737932] 30880000.serial: ttymxc2 at MMIO 0x30880000 (irq = 52, base_baud = 5000000) is a IMX
[    1.747568] 30a60000.serial: ttymxc3 at MMIO 0x30a60000 (irq = 59, base_baud = 5000000) is a IMX
[    1.757111] 30a80000.serial: ttymxc5 at MMIO 0x30a80000 (irq = 60, base_baud = 5000000) is a IMX
[    1.767487] imx sema4 driver is registered.
[    1.779548] imx ahci driver is registered.
[    1.788689] nand: device found, Manufacturer ID: 0xc2, Chip ID: 0xdc
[    1.795057] nand: Macronix MX30LF4G18AC
[    1.798940] nand: 512 MiB, SLC, erase size: 128 KiB, page size: 2048, OOB size: 64
[    1.808378] Bad block table found at page 262080, version 0x01
[    1.814502] Bad block table found at page 262016, version 0x01
[    1.820635] nand_read_bbt: bad block at 0x00000c7c0000
[    1.825787] nand_read_bbt: bad block at 0x0000105e0000
[    1.830956] nand_read_bbt: bad block at 0x000013020000
[    1.836162] 5 cmdlinepart partitions found on MTD device gpmi-nand
[    1.842369] Creating 5 MTD partitions on "gpmi-nand":
[    1.847435] 0x000000000000-0x000000800000 : "boot"
[    1.859492] 0x000000800000-0x000000a00000 : "uboot_env"
[    1.869428] 0x000000a00000-0x000000b00000 : "sc_default"
[    1.879450] 0x000000b00000-0x000001b00000 : "nandtee"
[    1.889465] 0x000001b00000-0x000020000000 : "rootfs"
[    1.899541] gpmi-nand 33002000.gpmi-nand: driver registered.
[    1.907799] libphy: Fixed MDIO Bus: probed
[    1.925663] pps pps0: new PPS source ptp0
[    1.931356] libphy: fec_enet_mii_bus: probed
[    1.941480] fec 30be0000.ethernet eth0: registered PHC device 0
[    1.947771] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    1.953645] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    1.960282] usbcore: registered new interface driver r8152
[    1.965842] usbcore: registered new interface driver lan78xx
[    1.971598] usbcore: registered new interface driver asix
[    1.977045] usbcore: registered new interface driver ax88179_178a
[    1.983236] usbcore: registered new interface driver cdc_ether
[    1.989149] usbcore: registered new interface driver smsc95xx
[    1.994953] usbcore: registered new interface driver net1080
[    2.000706] usbcore: registered new interface driver cdc_subset
[    2.006670] usbcore: registered new interface driver zaurus
[    2.012309] usbcore: registered new interface driver MOSCHIP usb-ethernet driver
[    2.019798] usbcore: registered new interface driver cdc_ncm
[    2.025467] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    2.032016] ehci-pci: EHCI PCI platform driver
[    2.036508] ehci-mxc: Freescale On-Chip EHCI Host driver
[    2.042223] usbcore: registered new interface driver usb-storage
[    2.050428] imx_usb 30b10000.usb: No over current polarity defined
[    2.133556] imx_usb 30b20000.usb: No over current polarity defined
[    2.142847] ci_hdrc ci_hdrc.1: EHCI Host Controller
[    2.147768] ci_hdrc ci_hdrc.1: new USB bus registered, assigned bus number 1
[    2.178608] ci_hdrc ci_hdrc.1: USB 2.0 started, EHCI 1.00
[    2.184228] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 5.04
[    2.192531] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    2.199779] usb usb1: Product: EHCI Host Controller
[    2.204668] usb usb1: Manufacturer: Linux 5.4.24+g4691ef6d8dd1 ehci_hcd
[    2.211306] usb usb1: SerialNumber: ci_hdrc.1
[    2.216402] hub 1-0:1.0: USB hub found
[    2.220229] hub 1-0:1.0: 1 port detected
[    2.236741] input: 30370000.snvs:snvs-powerkey as /devices/soc0/soc/30000000.aips-bus/30370000.snvs/30370000.snvs:snvs-powerkey/input/input0
[    2.253309] snvs_rtc 30370000.snvs:snvs-rtc-lp: registered as rtc0
[    2.259711] i2c /dev entries driver
[    2.265110] pxp-v4l2 pxp_v4l2_out: initialized
[    2.273914] imx2-wdt 30280000.wdog: timeout 60 sec (nowayout=0)
[    2.281227] sdhci: Secure Digital Host Controller Interface driver
[    2.287418] sdhci: Copyright(c) Pierre Ossman
[    2.291854] sdhci-pltfm: SDHCI platform and OF driver helper
[    2.299635] sdhci-esdhc-imx 30b50000.usdhc: Got CD GPIO
[    2.305038] sdhci-esdhc-imx 30b50000.usdhc: Got WP GPIO
[    2.352427] mmc1: SDHCI controller on 30b50000.usdhc [30b50000.usdhc] using ADMA
[    2.363438] caam 30900000.caam: device ID = 0x0a16030000000000 (Era 8)
[    2.370125] caam 30900000.caam: job rings = 3, qi = 0
[    2.376039] sdhci-esdhc-imx 30b50000.usdhc: card claims to support voltages below defined range
[    2.398970] random: fast init done
[    2.464212] mmc1: new ultra high speed SDR104 SDIO card at address 0001
[    2.611768] caam algorithms registered in /proc/crypto
[    2.664007] caam 30900000.caam: caam pkc algorithms registered in /proc/crypto
[    2.673678] caam_jr 30901000.jr0: registering rng-caam
[    2.689731] caam-snvs 30370000.caam-snvs: can't get snvs clock
[    2.695637] caam-snvs 30370000.caam-snvs: violation handlers armed - non-secure state
[    2.704613] usbcore: registered new interface driver usbhid
[    2.710227] usbhid: USB HID core driver
[    2.725739] wm8960 1-001a: Failed to issue reset
[    2.733899] rpmsg-audio-codec-wm8960 1-001a: Failed to issue reset
[    2.747974] fsl-sai 308a0000.sai: failed to get mclk0 clock: -2
[    2.762083] NET: Registered protocol family 10
[    2.767893] Segment Routing with IPv6
[    2.771725] NET: Registered protocol family 17
[    2.776245] lib80211: common routines for IEEE802.11 drivers
[    2.781990] Key type dns_resolver registered
[    2.793172] imx-cpufreq-dt imx-cpufreq-dt: cpu speed grade 2 mkt segment 0 supported-hw 0x4 0x1
[    2.803568] Registering SWP/SWPB emulation handler
[    2.808767] Loading compiled-in X.509 certificates
[    2.852526] vdd1p0d: supplied by SW2
[    2.856829] vdd1p2: supplied by SW2
[    2.861481] imx_thermal tempmon: Commercial CPU temperature grade - max:95C critical:90C passive:85C
[    2.875700] input: gpio-keys as /devices/soc0/gpio-keys/input/input1
[    2.884375] snvs_rtc 30370000.snvs:snvs-rtc-lp: setting system clock to 2021-07-01T22:49:43 UTC (1625179783)
[    2.894605] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    2.915300] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    2.922024] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    2.931216] platform regulatory.0: Falling back to sysfs fallback for: regulatory.db
[    2.964674] ALSA device list:
[    2.967656]   No soundcards found.
[    2.971158] Warning: unable to open an initial console.
[    3.011619] Freeing unused kernel memory: 25600K
[    3.028907] Run /init as init process
[    3.037949] Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
[    3.045649] CPU1: stopping
[    3.048373] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 5.4.24+g4691ef6d8dd1 #1
[    3.055515] Hardware name: Freescale i.MX7 Dual (Device Tree)
[    3.061297] [<801106d8>] (unwind_backtrace) from [<8010b5a0>] (show_stack+0x10/0x14)
[    3.069056] [<8010b5a0>] (show_stack) from [<80b7c24c>] (dump_stack+0x90/0xa4)
[    3.076294] [<80b7c24c>] (dump_stack) from [<8010ee80>] (handle_IPI+0x15c/0x188)
[    3.083707] [<8010ee80>] (handle_IPI) from [<804b13dc>] (gic_handle_irq+0x8c/0x90)
[    3.091292] [<804b13dc>] (gic_handle_irq) from [<80101a8c>] (__irq_svc+0x6c/0xa8)
[    3.098781] Exception stack(0x8608df28 to 0x8608df70)
[    3.103845] df20:                   00000000 82b24d20 00000001 8608c000 82a0bf50 00000001
[    3.112035] df40: 9faaf6b8 b588b33b b4c2f4ac 00000000 00000000 00000000 00000000 8608df78
[    3.120221] df60: 801a5c3c 8086eaa4 20000013 ffffffff
[    3.125291] [<80101a8c>] (__irq_svc) from [<8086eaa4>] (cpuidle_enter_state+0x80/0x3a0)
[    3.133311] [<8086eaa4>] (cpuidle_enter_state) from [<8086ee00>] (cpuidle_enter+0x28/0x38)
[    3.141592] [<8086ee00>] (cpuidle_enter) from [<8015bb88>] (do_idle+0x1f0/0x29c)
[    3.149005] [<8015bb88>] (do_idle) from [<8015bf28>] (cpu_startup_entry+0x18/0x1c)
[    3.156589] [<8015bf28>] (cpu_startup_entry) from [<801024ac>] (__enable_mmu+0x0/0x14)
[    3.164522] Rebooting in 5 seconds..