Skip to content

Instantly share code, notes, and snippets.

View jorgejch's full-sized avatar

Jorge Haddad jorgejch

View GitHub Profile
@bluewalk
bluewalk / GetNordVPNWireGuardDetails.md
Last active May 6, 2024 01:14
Getting NordVPN WireGuard details

About

Instructions to obtain WireGuard details of your NordVPN account. These can be used to setup a WireGuard tunnel on your router to NordVPN.

Source: https://forum.gl-inet.com/t/configure-wireguard-client-to-connect-to-nordvpn-servers/10422/27

Prerequisites

If you have any linux machine, use that or install a vm if you don't have one.

Get their official linux app installed. Make sure you have wireguard installed too. And set the used technology to Nordlynx by running nordvpn set technology nordlynx

@NathanGiesbrecht
NathanGiesbrecht / noip2.service
Last active February 24, 2024 01:32
Systemd Service file for no-ip.com dynamic ip updater
# Simple No-ip.com Dynamic DNS Updater
#
# By Nathan Giesbrecht (http://nathangiesbrecht.com)
#
# 1) Install binary as described in no-ip.com's source file (assuming results in /usr/local/bin)
# 2) Run sudo /usr/local/bin/noip2 -C to generate configuration file
# 3) Copy this file noip2.service to /etc/systemd/system/
# 4) Execute `sudo systemctl daemon-reload`
# 5) Execute `sudo systemctl enable noip2`
# 6) Execute `sudo systemctl start noip2`
#!/bin/sh
# this script sets some parameters to get a useable configuration
# these changes are not persistent, you may want to include this in your autostart
# 1 finger = left click, 2 finger = right click, 3 finger = middle click
synclient TapButton2=3
synclient TapButton3=2
synclient ClickFinger2=3
synclient ClickFinger3=2
@tfg13
tfg13 / touchpadconf.sh
Created November 24, 2013 15:50
script to set synaptics configuration for Thinkpad T440p
#!/bin/sh
# this script sets some parameters to get a useable configuration
# these changes are not persistent, you may want to include this in your autostart
# 1 finger = left click, 2 finger = right click, 3 finger = middle click
synclient TapButton2=3
synclient TapButton3=2
synclient ClickFinger2=3
synclient ClickFinger3=2