Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
edgerouter lite centurylink fiber pppoe configuration
scp config.boot ubnt@192.168.1.1:~/cl.boot
ssh ubnt@192.168.1.1
mv cl.boot /config/cl.boot
configure
load /config/cl.boot
commit
save
exit
firewall {
all-ping enable
broadcast-ping disable
ipv6-receive-redirects disable
ipv6-src-route disable
ip-src-route disable
log-martians enable
name WAN_IN {
default-action drop
description "WAN to internal"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
name WAN_LOCAL {
default-action drop
description "WAN to router"
rule 10 {
action accept
description "Allow established/related"
state {
established enable
related enable
}
}
rule 20 {
action drop
description "Drop invalid state"
state {
invalid enable
}
}
}
options {
mss-clamp {
interface-type pppoe
mss 1452
}
}
receive-redirects disable
send-redirects enable
source-validation disable
syn-cookies enable
}
interfaces {
ethernet eth0 {
address 192.168.1.1/24
description Local
duplex auto
speed auto
}
ethernet eth1 {
address dhcp
description Internet
duplex auto
speed auto
vif 201 {
firewall {
in {
name WAN_IN
}
local {
name WAN_LOCAL
}
}
pppoe 0 {
default-route auto
mtu 1492
name-server auto
password pass
user-id user
}
}
}
ethernet eth2 {
address 192.168.2.1/24
description "Local 2"
duplex auto
speed auto
}
loopback lo {
}
}
service {
dhcp-server {
disabled false
hostfile-update disable
shared-network-name LAN1 {
authoritative disable
subnet 192.168.1.0/24 {
default-router 192.168.1.1
dns-server 192.168.1.1
lease 86400
start 192.168.1.21 {
stop 192.168.1.240
}
}
}
shared-network-name LAN2 {
authoritative disable
subnet 192.168.2.0/24 {
default-router 192.168.2.1
dns-server 192.168.2.1
lease 86400
start 192.168.2.21 {
stop 192.168.2.240
}
}
}
}
dns {
forwarding {
cache-size 150
listen-on eth0
listen-on eth2
name-server 8.8.8.8
name-server 8.8.4.4
}
}
gui {
https-port 443
listen-address 192.168.1.1
}
mdns {
repeater {
interface eth0
interface eth1
interface eth2
}
}
nat {
rule 5010 {
log disable
outbound-interface pppoe0
protocol all
type masquerade
}
}
ssh {
port 22
protocol-version v2
listen-address 192.168.1.1
}
}
system {
host-name ubnt
login {
user ubnt {
authentication {
encrypted-password "$1$zKNoUbAo$gomzUbYvgyUMcD436Wo66."
}
full-name ""
level admin
}
}
ntp {
server 0.ubnt.pool.ntp.org {
}
server 1.ubnt.pool.ntp.org {
}
server 2.ubnt.pool.ntp.org {
}
server 3.ubnt.pool.ntp.org {
}
}
offload {
ipv4 {
forwarding enable
pppoe enable
vlan enable
}
}
syslog {
global {
facility all {
level notice
}
facility protocols {
level debug
}
}
}
time-zone UTC
}
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment