TP-LINK TL-WR307N

gistfile1.txt

RED | BLACK | BLACK | WHITE
 _______
|o o o o|
 -------
 | | | |
 | | | `- TP_OUT
 | | `- TP_IN
 | `- GND
 `- VCC

U-Boot 1.1.4 (Mar 21 2013 - 10:09:10)

AP121 (ar9330) U-boot

DRAM:  32 MB
led turning on for 1s...
id read 0x100000ff
flash size 4194304, sector count = 64
Flash:  4 MB
Using default environment

In:    serial
Out:   serial
Err:   serial
Net:   ag7240_enet_initialize...
No valid address in Flash. Using fixed address
No valid address in Flash. Using fixed address
: cfg1 0x5 cfg2 0x7114
eth0: 00:03:7f:09:0b:ad
ag7240_phy_setup
eth0 up
: cfg1 0xf cfg2 0x7214
eth1: 00:03:7f:09:0b:ad
athrs26_reg_init_lan
ATHRS26: resetting s26
ATHRS26: s26 reset done
ag7240_phy_setup
eth1 up
eth0, eth1
Autobooting in 1 seconds
hornet> help
?       - alias for 'help'
bootm   - boot application image from memory
cp      - memory copy
erase   - erase FLASH memory
help    - print online help
md      - memory display
mm      - memory modify (auto-incrementing)
mtest   - simple RAM test
mw      - memory write (fill)
nm      - memory modify (constant address)
printenv- print environment variables
progmac - Set ethernet MAC addresses
reset   - Perform RESET of the CPU
setenv  - set environment variables
tftpboot- boot image via network using TFTP protocol
version - print monitor version
hornet>