joshskidmore

#!/usr/bin/env bash

# Josh Skidmore <josh@josh.sc>

# Basic example of using an HTTP range header to extract EXIF data
# from a JPEG file without having to download the entire image.
# This has no error handling and assumes the EXIF data is embedded
# within the first $KB_TO_DOWNLOAD kilobytes of the image
# Requirements:
#   * curl

joshskidmore

INPUT = LINUX_DEVICE L64 /dev/input/by-id/usb-HAILUCK_CO._LTD_USB_KEYBOARD-event-kbd
OUTPUT = UINPUT_SINK

// "TH" = "tap hold"
// this definition states that tapping the ESC key for < 150ms
// acts as an escape and holding for anything > 150ms generates the ` character
// (which is a common place for the tick character on a US keyboard layout)
@esc = TH 150 esc             `

// "MT" = "multi tap"

joshskidmore

#!/usr/bin/env bash

echo "Configuring synaptics settings..."

S=synclient

# [man] The LeftEdge, RightEdge, TopEdge and BottomEdge parameters are used to define the edge and corner
# areas of the touchpad.  The parameters split the touchpad area in 9 pieces, like this:
# │             │
# │ LeftEdge    │ RightEdge

joshskidmore

#!/usr/bin/env bash

_dmesg=$(dmesg)

bios_version=$(echo -e "$_dmesg" | grep GPD | awk '{ print $9 }')

echo "You are running GPD P2 BIOS version $bios_version"

if [[ "$_dmesg" =~ "20190816" ]]; then
  echo "You have the DSDT for v0.23 loaded (joshwiththegoodhair version)"

joshskidmore

#!/usr/bin/env bash

export DISPLAY=:0

HARD_RESET=$1


reset_kbd () {
  xdotool keyup Shift_L Shift_R Control_L Control_R Meta_L Meta_R Alt_L Alt_R Super_L Super_R Hyper_L Hyper_R ISO_Level2_Latch ISO_Level3_Shift ISO_Level3_Latch ISO_Level3_Lock ISO_Level5_Shift ISO_Level5_Latch ISO_Level5_Lock Caps_Lock 204 205 206 207

joshskidmore

#!/usr/bin/env bash

# resets keyboard; kills all running instances of xcape
reset_kbd () {
  local xcape_cnt=$(pgrep xcape | wc -l)

  echo "  - reset_kbd"
  echo "    - killing $xcape_cnt instances of xcape"

  setxkbmap -layout us

joshskidmore

00:00.0 Host bridge: Intel Corporation Device 31f0 (rev 03)
	DeviceName: Onboard - Other
	Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
	Status: Cap- 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx-
	Latency: 0

00:00.1 Signal processing controller: Intel Corporation Celeron/Pentium Silver Processor Dynamic Platform and Thermal Framework Processor Participant (rev 03)
	DeviceName: Onboard - Other
	Subsystem: Intel Corporation Celeron/Pentium Silver Processor Dynamic Platform and Thermal Framework Processor Participant
	Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-

joshskidmore

#!/usr/bin/env bash

# update
apt -y update
apt -y upgrade
apt -y dist-upgrade

# 5.2 mainline kernel
cd /tmp
wget https://kernel.ubuntu.com/~kernel-ppa/mainline/v5.2-rc6/linux-headers-5.2.0-050200rc6_5.2.0-050200rc6.201906222033_all.deb

joshskidmore

#!/usr/bin/env bash

id=$(lsusb.py | grep -i hail | awk '{ print $1 }')

echo "on" | sudo tee /sys/bus/usb/devices/${id}/power/control

joshskidmore

server setup

[ON SERVER] install wireguard (ubuntu)

sudo add-apt-repository ppa:wireguard/wireguard
sudo apt-get update
sudo apt-get install wireguard-dkms wireguard-tools

[ON SERVER] create wireguard conf