James Savage jsavage

## relog.sh
#!/bin/bash

# CONF

DBG=true
RELOG_UNAME=your@email.com
RELOG_PASSW=xxxxxxxxxxxxxxx

# END CONF

## pizero_usb_internet.sh
#!/bin/bash
# Automatically setup routing and DNS for a PiZero connected over a USB-network
# NOTE: Before running this script for the first time, you need to run the
# following two commands on your Linux PC
#    sudo sysctl -w net.ipv4.ip_forward=1
#    sudo iptables -t nat -A POSTROUTING -s 169.254.0.0/16 -o eth0 -j MASQUERADE
# (replace eth0 in the second command with your internet-facing network device,
# e.g. wlan0 on a laptop)

# The Avahi-discovered hostname

## quisk_conf_fcd.py
# Custom quisk_conf.py configuration file for Funcube Dongle.
# See quisk_conf_defaults.py for more information.

# In ALSA, soundcards have these names.  The "hw" devices are the raw
# hardware devices, and should be used for soundcard capture.
#name_of_sound_capt = "hw:0"
#name_of_sound_capt = "hw:1"
#name_of_sound_capt = "plughw"
#name_of_sound_capt = "plughw:1"
#name_of_sound_capt = "default"
	#!/bin/bash

	# CONF

	DBG=true
	RELOG_UNAME=your@email.com
	RELOG_PASSW=xxxxxxxxxxxxxxx

	# END CONF
	#!/bin/bash
	# Automatically setup routing and DNS for a PiZero connected over a USB-network
	# NOTE: Before running this script for the first time, you need to run the
	# following two commands on your Linux PC
	# sudo sysctl -w net.ipv4.ip_forward=1
	# sudo iptables -t nat -A POSTROUTING -s 169.254.0.0/16 -o eth0 -j MASQUERADE
	# (replace eth0 in the second command with your internet-facing network device,
	# e.g. wlan0 on a laptop)

	# The Avahi-discovered hostname
	# Custom quisk_conf.py configuration file for Funcube Dongle.
	# See quisk_conf_defaults.py for more information.

	# In ALSA, soundcards have these names. The "hw" devices are the raw
	# hardware devices, and should be used for soundcard capture.
	#name_of_sound_capt = "hw:0"
	#name_of_sound_capt = "hw:1"
	#name_of_sound_capt = "plughw"
	#name_of_sound_capt = "plughw:1"
	#name_of_sound_capt = "default"