gistfile1.txt

=== Diagnostics ===
RepRapFirmware for Duet 2 WiFi/Ethernet version 2.03 running on Duet WiFi 1.02 or later + DueX5
Board ID: 08DLM-996RU-N8PS4-7J9FL-3SN6Q-9S97R
Used output buffers: 1 of 24 (24 max)
=== RTOS ===
Static ram: 25680
Dynamic ram: 95212 of which 0 recycled
Exception stack ram used: 516
Never used ram: 9664
Tasks: NETWORK(ready,524) HEAT(blocked,1236) DUEX(suspended,156) MAIN(running,3756) IDLE(ready,160)
Owned mutexes:
=== Platform ===
Last reset 05:38:14 ago, cause: power up
Last software reset at 2020-08-19 15:23, reason: User, spinning module GCodes, available RAM 9664 bytes (slot 3)
Software reset code 0x0003 HFSR 0x00000000 CFSR 0x00000000 ICSR 0x0441f000 BFAR 0xe000ed38 SP 0xffffffff Task 0x4e49414d
Error status: 4
Free file entries: 9
SD card 0 detected, interface speed: 20.0MBytes/sec
SD card longest block write time: 6.0ms, max retries 0
MCU temperature: min 35.4, current 36.0, max 36.3
Supply voltage: min 24.1, current 24.2, max 24.3, under voltage events: 0, over voltage events: 0, power good: yes
Driver 0: ok, SG min/max 137/301
Driver 1: ok, SG min/max 147/304
Driver 2: ok, SG min/max 0/1023
Driver 3: standstill, SG min/max not available
Driver 4: standstill, SG min/max not available
Driver 5: ok, SG min/max 0/1023
Driver 6: standstill, SG min/max not available
Driver 7: standstill, SG min/max not available
Driver 8: standstill, SG min/max not available
Driver 9: standstill, SG min/max not available
Date/time: 2020-08-28 22:53:56
Cache data hit count 4294967295
Slowest loop: 7.50ms; fastest: 0.08ms
I2C nak errors 0, send timeouts 0, receive timeouts 0, finishTimeouts 0, resets 0
=== Move ===
Hiccups: 0, FreeDm: 166, MinFreeDm: 108, MaxWait: 0ms
Bed compensation in use: mesh, comp offset 0.000
=== DDARing ===
Scheduled moves: 51767, completed moves: 51733, StepErrors: 0, LaErrors: 0, Underruns: 0, 0
=== Heat ===
Bed heaters = 0 -1 -1 -1, chamberHeaters = -1 -1
Heater 0 is on, I-accum = 0.2
Heater 3 is on, I-accum = 0.7
=== GCodes ===
Segments left: 1
Stack records: 3 allocated, 0 in use
Movement lock held by null
http is idle in state(s) 0
telnet is idle in state(s) 0
file is doing "G1 X148.706 Y67.322 E0.01893" in state(s) 0
serial is idle in state(s) 0
aux is idle in state(s) 0
daemon is idle in state(s) 0
queue is idle in state(s) 0
autopause is idle in state(s) 0
Code queue is empty.
=== Network ===
Slowest loop: 202.19ms; fastest: 0.08ms
Responder states: HTTP(0) HTTP(0) HTTP(0) HTTP(0) FTP(0) Telnet(0) Telnet(0)
HTTP sessions: 1 of 8
- WiFi -
Network state is running
WiFi module is connected to access point
Failed messages: pending 0, notready 0, noresp 31
WiFi firmware version 1.23
WiFi MAC address 84:0d:8e:b2:ef:8a
WiFi Vcc 3.43, reset reason Turned on by main processor
WiFi flash size 4194304, free heap 25584
WiFi IP address 192.168.43.69
WiFi signal strength -48dBm, reconnections 0, sleep mode modem
Socket states: 0 0 0 0 0 0 0 0