Skip to content

Instantly share code, notes, and snippets.

@jsyang

jsyang/uart-jetson-nano-no-usb.log

Created June 6, 2019 21:19
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save jsyang/cad4ce745fbf47f054091bc80f83de54 to your computer and use it in GitHub Desktop.
Save jsyang/cad4ce745fbf47f054091bc80f83de54 to your computer and use it in GitHub Desktop.
Download ZIP
Raw
uart-jetson-nano-no-usb.log
22:07:38.609 -> [0000.126] [TegraBoot] (version 00.00.2018.01-l4t-33e7fa82)
22:07:38.885 -> [0000.131] Processing in cold boot mode Bootloader 2
22:07:38.885 -> [0000.136] A02 Bootrom Patch rev = 1023
22:07:38.885 -> [0000.139] Power-up reason: pmc por
22:07:38.885 -> [0000.142] No Battery Present
22:07:38.885 -> [0000.145] pmic max77620 reset reason
22:07:38.885 -> [0000.148] pmic max77620 NVERC : 0x40
22:07:38.885 -> [0000.152] RamCode = 0
22:07:38.885 -> [0000.154] Platform has DDR4 type RAM
22:07:38.885 -> [0000.157] max77620 disabling SD1 Remote Sense
22:07:38.885 -> [0000.161] Setting DDR voltage to 1125mv
22:07:38.885 -> [0000.165] Serial Number of Pmic Max77663: 0x1d24e6
22:07:38.885 -> [0000.173] Entering ramdump check
22:07:38.885 -> [0000.176] Get RamDumpCarveOut = 0x0
22:07:38.885 -> [0000.179] RamDumpCarveOut=0x0, RamDumperFlag=0xe59ff3f8
22:07:38.885 -> [0000.184] Last reboot was clean, booting normally!
22:07:38.885 -> [0000.189] Sdram initialization is successful
22:07:38.885 -> [0000.193] SecureOs Carveout Base=0x00000000ff800000 Size=0x00800000
22:07:38.885 -> [0000.199] Lp0 Carveout Base=0x00000000ff780000 Size=0x00001000
22:07:38.885 -> [0000.205] BpmpFw Carveout Base=0x00000000ff700000 Size=0x00080000
22:07:38.885 -> [0000.211] GSC1 Carveout Base=0x00000000ff600000 Size=0x00100000
22:07:38.885 -> [0000.217] GSC2 Carveout Base=0x00000000ff500000 Size=0x00100000
22:07:38.885 -> [0000.223] GSC4 Carveout Base=0x00000000ff400000 Size=0x00100000
22:07:38.885 -> [0000.228] GSC5 Carveout Base=0x00000000ff300000 Size=0x00100000
22:07:38.885 -> [0000.234] GSC3 Carveout Base=0x000000017f300000 Size=0x00d00000
22:07:38.885 -> [0000.250] RamDump Carveout Base=0x00000000ff280000 Size=0x00080000
22:07:38.928 -> [0000.257] Platform-DebugCarveout: 0
22:07:38.928 -> [0000.260] Nck Carveout Base=0x00000000ff080000 Size=0x00200000
22:07:38.928 -> [0000.266] Non secure mode, and RB not enabled.
22:07:38.928 -> [0000.272] Invalid GPT Partition
22:07:38.928 -> [0000.287] Using BFS PT to query partitions
22:07:38.928 -> [0000.291] failed to load NvTbootTbootCpu from (2:0)
22:07:38.928 -> [0000.296] re-load NvTbootTbootCpu from (4:0)
22:07:39.094 -> [0000.446] Csd NumOfBlocks=249737216
22:07:39.128 -> [0000.506] Using GPT Primary to query partitions
22:07:39.161 -> [0000.516] Loading Tboot-CPU binary
22:07:39.577 -> [0000.893] Verifying TBC in OdmNonSecureSBK mode
22:07:39.577 -> [0000.903] Bootloader load address is 0xa0000000, entry address is 0xa0000258
22:07:39.577 -> [0000.910] Bootloader downloaded successfully.
22:07:39.577 -> [0000.914] Downloaded Tboot-CPU binary to 0xa0000258
22:07:39.577 -> [0000.919] MAX77620_GPIO5 configured
22:07:39.577 -> [0000.923] CPU power rail is up
22:07:39.577 -> [0000.926] CPU clock enabled
22:07:39.577 -> [0000.929] Performing RAM repair
22:07:39.577 -> [0000.932] Updating A64 Warmreset Address to 0xa00002e9
22:07:39.577 -> [0000.937] Loading NvTbootBootloaderDTB
22:07:40.925 -> [0002.248] Verifying NvTbootBootloaderDTB in OdmNonSecureSBK mode
22:07:40.991 -> [0002.310] Bootloader DTB Load Address: 0x83000000
22:07:40.991 -> [0002.314] Loading NvTbootKernelDTB
22:07:42.361 -> [0003.625] Verifying NvTbootKernelDTB in OdmNonSecureSBK mode
22:07:42.395 -> [0003.686] Kernel DTB Load Address: 0x83100000
22:07:42.395 -> [0003.696] Loading cboot binary
22:07:44.134 -> [0005.377] Verifying EBT in OdmNonSecureSBK mode
22:07:44.203 -> [0005.420] Bootloader load address is 0x92c00000, entry address is 0x92c00258
22:07:44.203 -> [0005.427] Bootloader downloaded successfully.
22:07:44.417 -> [0005.621] Using BFS PT to query partitions
22:07:44.417 -> [0005.625] Next binary entry address: 0x92c00258
22:07:44.417 -> [0005.629] BoardId: 3448
22:07:44.417 -> [0005.634] Overriding pmu board id with proc board id
22:07:44.417 -> [0005.639] Display board id is not available
22:07:45.953 -> [0007.137] Verifying SC7EntryFw in OdmNonSecureSBK mode
22:07:45.988 -> [0007.190] /bpmp deleted
22:07:45.988 -> [0007.192] SC7EntryFw header found loaded at 0xff700000
22:07:46.197 -> [0007.383] OVR2 PMIC
22:07:46.197 -> [0007.385] Bpmp FW successfully loaded
22:07:46.197 -> [0007.403] WB0 init successfully at 0xff780000
22:07:46.230 -> [0007.408] Set NvDecSticky Bits
22:07:46.230 -> [0007.411] GSC2 address ff53fffc value c0edbbcc
22:07:46.230 -> [0007.417] GSC MC Settings done
22:07:46.230 -> [0007.425] TOS Image length 53680
22:07:46.230 -> [0007.428] Monitor size 53680
22:07:46.230 -> [0007.431] OS size 0
22:07:46.406 -> [0007.594] Secure Os AES-CMAC Verification Success!
22:07:46.406 -> [0007.598] TOS image cipher info: plaintext
22:07:46.406 -> [0007.602] Loading and Validation of Secure OS Successful
22:07:46.406 -> [0007.618] SC7 Entry Firmware - 0xff700000, 0x4000
22:07:46.507 -> [0007.623] NvTbootPackSdramParams: start.
22:07:46.507 -> [0007.628] NvTbootPackSdramParams: done.
22:07:46.507 -> [0007.632] Tegraboot started after 53289 us
22:07:46.507 -> [0007.635] Basic modules init took 5725528 us
22:07:46.507 -> [0007.640] NvTbootQspiFlashIoctl: Opcode = 1 not supported
22:07:46.507 -> [0007.645] Sec Bootdevice Read Time = 12 ms, Read Size = 65 KB
22:07:46.507 -> [0007.650] Sec Bootdevice Write Time = 0 ms, Write Size = 0 KB
22:07:46.507 -> [0007.656] Storage Device Read Time = 6749 ms, Read Size = 2306 KB
22:07:46.507 -> [0007.662] Storage Device Write Time = 0 ms, Write Size = 0 KB
22:07:46.507 -> [0007.667] Next stage binary read took 1529678 us
22:07:46.507 -> [0007.672] Carveout took -1541359 us
22:07:46.507 -> [0007.675] CPU initialization took 2047984 us
22:07:46.507 -> [0007.679] Total time taken by TegraBoot 7761831 us
22:07:46.507 ->
22:07:46.507 -> [0007.684] Starting CPU & Halting co-processor
22:07:46.507 ->
22:07:46.507 -> 64NOTICE: BL31: v1.3(release):eca0c5e
22:07:46.507 -> NOTICE: BL31: Built : 00:21:27, Mar 13 2019
22:07:46.507 -> ERROR: Error initializing runtime service trusty_fast
22:07:46.611 -> [0007.806] RamCode = 0
22:07:46.863 -> [0007.811] LPDDR4 Training: Read DT: Number of tables = 2
22:07:46.863 -> [0007.816] EMC Training (SRC-freq: 204000; DST-freq: 1600000)
22:07:46.863 -> [0007.828] EMC Training Successful
22:07:46.863 -> [0007.831] 408000 not found in DVFS table
22:07:46.863 -> [0007.838] RamCode = 0
22:07:46.863 -> [0007.841] DT Write: emc-table@204000 succeeded
22:07:46.863 -> [0007.847] DT Write: emc-table@1600000 succeeded
22:07:46.863 -> [0007.851] LPDDR4 Training: Write DT: Number of tables = 2
22:07:46.863 -> [0008.048]
22:07:46.863 -> [0008.049] Debug Init done
22:07:46.863 -> [0008.052] Marked DTB cacheable
22:07:46.863 -> [0008.055] Bootloader DTB loaded at 0x83000000
22:07:46.863 -> [0008.060] Marked DTB cacheable
22:07:46.863 -> [0008.063] Kernel DTB loaded at 0x83100000
22:07:46.863 -> [0008.067] DeviceTree Init done
22:07:46.863 -> [0008.079] Pinmux applied successfully
22:07:46.863 -> [0008.083] gicd_base: 0x50041000
22:07:46.863 -> [0008.087] gicc_base: 0x50042000
22:07:46.863 -> [0008.090] Interrupts Init done
22:07:46.863 -> [0008.094] Using base:0x60005090 & irq:208 for tick-timer
22:07:46.863 -> [0008.099] Using base:0x60005098 for delay-timer
22:07:46.863 -> [0008.103] platform_init_timer: DONE
22:07:46.863 -> [0008.107] Timer(tick) Init done
22:07:46.863 -> [0008.111] osc freq = 38400 khz
22:07:46.863 -> [0008.115]
22:07:46.863 -> [0008.116] welcome to cboot
22:07:46.863 -> [0008.118]
22:07:46.863 -> [0008.119] Cboot Version: 00.00.2018.01-t210-f76b856b
22:07:46.863 -> [0008.124] calling constructors
22:07:46.863 -> [0008.127] initializing heap
22:07:46.863 -> [0008.130] initializing threads
22:07:46.863 -> [0008.133] initializing timers
22:07:46.863 -> [0008.136] creating bootstrap completion thread
22:07:46.863 -> [0008.140] top of bootstrap2()
22:07:46.863 -> [0008.143] CPU: ARM Cortex A57
22:07:46.863 -> [0008.146] CPU: MIDR: 0x411FD071, MPIDR: 0x80000000
22:07:46.863 -> [0008.151] initializing platform
22:07:46.863 -> [0008.154] Scratch reg 37 & 271 initial value set..
22:07:46.863 -> [0008.160] cboot:secure-pmc present
22:07:46.863 -> [0008.163] Manufacturer: MF = 0xc2, ID MSB = 0x25
22:07:46.863 -> [0008.168] ID LSB = 0x36, ID-CFI len = 194 bytes
22:07:46.863 -> [0008.172] Macronix QSPI chip present
22:07:46.863 -> [0008.176] SPI device register
22:07:46.863 -> [0008.179] init boot device
22:07:46.863 -> [0008.181] allocating memory for boot device(SPI)
22:07:46.863 -> [0008.186] registering boot device
22:07:46.863 -> [0008.195] sdmmc node status = okay
22:07:46.863 -> [0008.199] sdcard instance = 0
22:07:46.863 -> [0008.201] sdcard gpio handle 0x5d
22:07:46.863 -> [0008.205] sdcard gpio pin 0xc9
22:07:46.863 -> [0008.208] sdcard gpio flags 0x0
22:07:46.863 -> [0008.211] vmmc-supply 0x9d
22:07:46.863 -> [0008.213] Instance: 0
22:07:46.863 -> [0008.215] Allocating memory for context
22:07:46.863 -> [0008.219] enabling clock
22:07:46.863 -> [0008.222] sd card init
22:07:46.863 -> [0008.224] Check card present and stable
22:07:46.863 -> [0008.228] Send command 0
22:07:46.915 -> [0008.252] Send command 3
22:07:46.915 -> [0008.256] Set RCA for the card
22:07:46.915 -> [0008.259] Query card specific data by command 9
22:07:46.915 -> [0008.266] Parse CSD data
22:07:46.915 -> [0008.268] Send command 7
22:07:46.915 -> [0008.279] Calling sd device register
22:07:46.915 -> [0008.282] Init sdcard
22:07:46.915 -> [0008.284] Allocating memory for boot device
22:07:46.915 -> [0008.288] Registering user device
22:07:47.075 -> [0008.301] Enable APE clock
22:07:47.075 -> [0008.304] Un-powergate APE partition
22:07:47.075 -> [0008.307] of_register: registering tegra_udc to of_hal
22:07:47.075 -> [0008.313] of_register: registering tegra_udc to of_hal
22:07:47.075 -> [0008.318] of_register: registering inv20628-driver to of_hal
22:07:47.075 -> [0008.323] of_register: registering ads1015-driver to of_hal
22:07:47.075 -> [0008.329] of_register: registering lp8557-bl-driver to of_hal
22:07:47.075 -> [0008.335] of_register: registering bq2419x_charger to of_hal
22:07:47.075 -> [0008.340] of_register: registering cpc to of_hal
22:07:47.075 -> [0008.345] of_register: registering bq27441_fuel_gauge to of_hal
22:07:47.075 -> [0008.356] gpio framework initialized
22:07:47.075 -> [0008.360] of_register: registering tca9539_gpio to of_hal
22:07:47.075 -> [0008.365] of_register: registering tca9539_gpio to of_hal
22:07:47.075 -> [0008.370] of_register: registering i2c_bus_driver to of_hal
22:07:47.075 -> [0008.376] of_register: registering i2c_bus_driver to of_hal
22:07:47.075 -> [0008.382] of_register: registering i2c_bus_driver to of_hal
22:07:47.075 -> [0008.387] of_register: registering i2c_bus_driver to of_hal
22:07:47.075 -> [0008.393] pmic framework initialized
22:07:47.075 -> [0008.396] of_register: registering max77620_pmic to of_hal
22:07:47.075 -> [0008.402] regulator framework initialized
22:07:47.075 -> [0008.406] of_register: registering tps65132_bl_driver to of_hal
22:07:47.075 -> [0008.411] initializing target
22:07:47.075 -> [0008.417] gpio_driver_register: register 'tegra_gpio_driver' driver
22:07:47.075 -> [0008.426] fixed regulator driver initialized
22:07:47.075 -> [0008.444] initializing OF layer
22:07:47.252 -> [0008.446] NCK carveout not present
22:07:47.252 -> [0008.450] Skipping dts_overrides
22:07:47.252 -> [0008.454] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
22:07:47.252 -> [0008.470] I2C Bus Init done
22:07:47.252 -> [0008.472] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
22:07:47.252 -> [0008.483] I2C Bus Init done
22:07:47.252 -> [0008.485] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
22:07:47.252 -> [0008.495] I2C Bus Init done
22:07:47.252 -> [0008.498] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
22:07:47.252 -> [0008.508] I2C Bus Init done
22:07:47.252 -> [0008.511] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
22:07:47.252 -> [0008.521] I2C Bus Init done
22:07:47.252 -> [0008.524] of_children_init: Ops found for compatible string maxim,max77620
22:07:47.252 -> [0008.534] max77620_init using irq 118
22:07:47.252 -> [0008.539] register 'maxim,max77620' pmic
22:07:47.252 -> [0008.543] gpio_driver_register: register 'max77620-gpio' driver
22:07:47.252 -> [0008.550] of_children_init: Ops found for compatible string nvidia,tegra210-i2c
22:07:47.252 -> [0008.560] I2C Bus Init done
22:07:47.252 -> [0008.563] NCK carveout not present
22:07:47.252 -> [0008.567] shim_invoke: No NCT, Calling dts updates
22:07:47.252 -> [0008.578] Find /i2c@7000c000's alias i2c0
22:07:47.252 -> [0008.582] get eeprom at 1-a0, size 256, type 0
22:07:47.252 -> [0008.590] Find /i2c@7000c500's alias i2c2
22:07:47.252 -> [0008.594] get eeprom at 3-a0, size 256, type 0
22:07:47.252 -> [0008.599] get eeprom at 3-ae, size 256, type 0
22:07:47.252 -> [0008.603] pm_ids_update: Updating 1,a0, size 256, type 0
22:07:47.252 -> [0008.608] I2C slave not started
22:07:47.252 -> [0008.611] I2C write failed
22:07:47.252 -> [0008.614] Writing offset failed
22:07:47.252 -> [0008.617] eeprom_init: EEPROM read failed
22:07:47.252 -> [0008.621] pm_ids_update: eeprom init failed
22:07:47.252 -> [0008.625] pm_ids_update: Updating 3,a0, size 256, type 0
22:07:47.288 -> [0008.655] pm_ids_update: The pm board id is 3448-0000-200
22:07:47.318 -> [0008.662] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50
22:07:47.318 -> [0008.670] pm_ids_update: pm id update successful
22:07:47.318 -> [0008.674] pm_ids_update: Updating 3,ae, size 256, type 0
22:07:47.318 -> [0008.704] pm_ids_update: The pm board id is 3449-0000-200
22:07:47.352 -> [0008.710] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57
22:07:47.352 -> [0008.718] pm_ids_update: pm id update successful
22:07:47.352 -> [0008.748] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
22:07:47.493 -> [0008.754] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB
22:07:47.493 -> [0008.762] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
22:07:47.493 -> [0008.768] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB
22:07:47.493 -> [0008.776] updating /chosen/nvidia,ethernet-mac node 00:04:4b:e4:40:66
22:07:47.493 -> [0008.783] Plugin Manager: Parse ODM data 0x00084000
22:07:47.493 -> [0008.793] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
22:07:47.493 -> [0008.813] Find /i2c@7000c000's alias i2c0
22:07:47.493 -> [0008.817] get eeprom at 1-a0, size 256, type 0
22:07:47.493 -> [0008.826] Find /i2c@7000c500's alias i2c2
22:07:47.493 -> [0008.830] get eeprom at 3-a0, size 256, type 0
22:07:47.493 -> [0008.834] get eeprom at 3-ae, size 256, type 0
22:07:47.493 -> [0008.839] pm_ids_update: Updating 1,a0, size 256, type 0
22:07:47.493 -> [0008.844] I2C slave not started
22:07:47.493 -> [0008.847] I2C write failed
22:07:47.493 -> [0008.849] Writing offset failed
22:07:47.493 -> [0008.852] eeprom_init: EEPROM read failed
22:07:47.493 -> [0008.856] pm_ids_update: eeprom init failed
22:07:47.493 -> [0008.861] pm_ids_update: Updating 3,a0, size 256, type 0
22:07:47.493 -> [0008.891] pm_ids_update: The pm board id is 3448-0000-200
22:07:47.537 -> [0008.897] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50
22:07:47.537 -> [0008.904] pm_ids_update: pm id update successful
22:07:47.537 -> [0008.908] pm_ids_update: Updating 3,ae, size 256, type 0
22:07:47.537 -> [0008.939] pm_ids_update: The pm board id is 3449-0000-200
22:07:47.569 -> [0008.945] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57
22:07:47.569 -> [0008.952] pm_ids_update: pm id update successful
22:07:47.602 -> [0008.982] Chip UID is 000000016441f8091000000012010500
22:07:47.641 -> [0008.987] Add serial number:04215190129720000501 as DT property
22:07:47.641 -> [0008.995] Applying platform configs
22:07:47.641 -> [0009.001] platform-init is not present. Skipping
22:07:47.641 -> [0009.006] calling apps_init()
22:07:47.675 -> [0009.031] Found 12 GPT partitions in "sd0"
22:07:47.675 -> [0009.035] Proceeding to Cold Boot
22:07:47.675 -> [0009.038] starting app android_boot_app
22:07:47.675 -> [0009.042] Device state: unlocked
22:07:47.675 -> [0009.045] display console init
22:07:47.675 -> [0009.053] could not find regulator
22:07:47.709 -> [0009.077] hdmi cable not connected
22:07:47.743 -> [0009.080] is_hdmi_needed: HDMI not connected, returning false
22:07:47.743 -> [0009.089] hdmi is not connected
22:07:47.743 -> [0009.092] sor0 is not supported
22:07:47.743 -> [0009.095] display_console_init: no valid display out_type
22:07:47.743 -> [0009.103] subnode volume_up is not found !
22:07:47.743 -> [0009.107] subnode back is not found !
22:07:47.743 -> [0009.110] subnode volume_down is not found !
22:07:47.743 -> [0009.114] subnode menu is not found !
22:07:47.743 -> [0009.118] Gpio keyboard init success
22:07:47.776 -> [0009.163] found decompressor handler: lz4-legacy
22:07:47.810 -> [0009.178] decompressing blob (type 1)...
22:07:47.810 -> [0009.211] display_resolution: No display init
22:07:47.844 -> [0009.216] Failed to retrieve display resolution
22:07:47.844 -> [0009.220] Could not load/initialize BMP blob...ignoring
22:07:47.948 -> [0009.273] decompressor handler not found
22:07:47.948 -> [0009.277] load_firmware_blob: Firmware blob loaded, entries=2
22:07:47.948 -> [0009.283] se_aes_verify_sbk_clear: Error
22:07:47.948 -> [0009.286] bl_battery_charging: connected to external power supply
22:07:47.948 -> [0009.293] xusb is supported
22:07:47.948 -> [0009.299] error while finding nvidia,portmap
22:07:47.948 -> [0009.305] could not find regulator
22:07:48.444 -> [0009.808] xusb blob version 0 size 126464
22:07:48.444 -> [0009.812] firmware size 126464
22:07:48.444 -> [0009.817] Firmware timestamp: 0x59fc70d3, Version: 50.20 release
22:07:48.444 -> [0009.826] xhci0: 64 bytes context size, 32-bit DMA
22:07:48.481 -> [0009.866] usbus0: 5.0Gbps Super Speed USB v3.0
22:07:48.519 -> [0009.886] uhub0: <Nvidia XHCI root HUB, class 9/0, rev 3.00/1.00, addr 1> on usbus0
22:07:49.148 -> [0010.536] uhub0: 9 ports with 9 removable, self powered
22:07:50.242 -> [0011.536] failed to get HID devices
22:07:50.242 -> [0011.539] failed to init xhci or no usb device attached
22:07:50.242 -> [0011.546] display_console_ioctl: No display init
22:07:50.242 -> [0011.551] switch_backlight failed
22:07:50.242 -> [0011.557] device_query_partition_size: failed to open partition sd0:MSC !
22:07:50.242 -> [0011.564] MSC Partition not found
22:07:50.242 -> [0011.570] device_query_partition_size: failed to open partition sd0:USP !
22:07:50.242 -> [0011.577] USP partition read failed!
22:07:50.242 -> [0011.580] blob_init: blob-partition USP header read failed
22:07:50.242 -> [0011.586] android_boot Unable to update recovery partition
22:07:50.242 -> [0011.591] kfs_getpartname: name = LNX
22:07:50.242 -> [0011.595] Loading kernel from LNX
22:07:50.275 -> [0011.654] Verifying boot image in OdmNonSecureSBK mode
22:07:50.342 -> [0011.697] kernel load address: 0x80080000, size: 476936 bytes
22:07:50.342 -> [0011.702] ramdisk load address: 0x84100000, size: 0 bytes
22:07:50.342 -> [0011.708] load kernel from storage
22:07:50.342 -> [0011.719] decompressor handler not found
22:07:50.513 -> [0011.776] Successfully loaded kernel and ramdisk images
22:07:50.513 -> [0011.782] display_resolution: No display init
22:07:50.513 -> [0011.787] Failed to retrieve display resolution
22:07:50.513 -> [0011.791] bmp blob is not loaded and initialized
22:07:50.513 -> [0011.796] Failed to display boot-logo
22:07:50.513 -> [0011.799] NCK carveout not present
22:07:50.513 -> [0011.802] Skipping dts_overrides
22:07:50.513 -> [0011.806] NCK carveout not present
22:07:50.513 -> [0011.809] shim_invoke: No NCT, Calling dts updates
22:07:50.513 -> [0011.820] Find /i2c@7000c000's alias i2c0
22:07:50.513 -> [0011.824] get eeprom at 1-a0, size 256, type 0
22:07:50.513 -> [0011.833] Find /i2c@7000c500's alias i2c2
22:07:50.513 -> [0011.837] get eeprom at 3-a0, size 256, type 0
22:07:50.513 -> [0011.841] get eeprom at 3-ae, size 256, type 0
22:07:50.513 -> [0011.845] pm_ids_update: Updating 1,a0, size 256, type 0
22:07:50.513 -> [0011.851] I2C slave not started
22:07:50.513 -> [0011.854] I2C write failed
22:07:50.513 -> [0011.856] Writing offset failed
22:07:50.513 -> [0011.859] eeprom_init: EEPROM read failed
22:07:50.513 -> [0011.863] pm_ids_update: eeprom init failed
22:07:50.513 -> [0011.867] pm_ids_update: Updating 3,a0, size 256, type 0
22:07:50.513 -> [0011.897] pm_ids_update: The pm board id is 3448-0000-200
22:07:50.555 -> [0011.904] Adding plugin-manager/ids/3448-0000-200=/i2c@7000c500:module@0x50
22:07:50.555 -> [0011.912] pm_ids_update: pm id update successful
22:07:50.555 -> [0011.916] pm_ids_update: Updating 3,ae, size 256, type 0
22:07:50.555 -> [0011.946] pm_ids_update: The pm board id is 3449-0000-200
22:07:50.582 -> [0011.953] Adding plugin-manager/ids/3449-0000-200=/i2c@7000c500:module@0x57
22:07:50.582 -> [0011.960] pm_ids_update: pm id update successful
22:07:50.616 -> [0011.991] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
22:07:50.857 -> [0011.996] shim_eeprom_update_mac:267: Failed to update 0 MAC address in DTB
22:07:50.857 -> [0012.004] eeprom_get_mac: EEPROM invalid MAC address (all 0xff)
22:07:50.857 -> [0012.010] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB
22:07:50.857 -> [0012.019] updating /chosen/nvidia,ethernet-mac node 00:04:4b:e4:40:66
22:07:50.857 -> [0012.025] Plugin Manager: Parse ODM data 0x00084000
22:07:50.857 -> [0012.036] shim_cmdline_install: /chosen/bootargs: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
22:07:50.857 -> [0012.049] Add serial number:04215190129720000501 as DT property
22:07:50.857 -> [0012.058] "bpmp" doesn't exist, creating
22:07:50.857 -> [0012.064] Updated bpmp info to DTB
22:07:50.857 -> [0012.068] Updated initrd info to DTB
22:07:50.857 -> [0012.072] "proc-board" doesn't exist, creating
22:07:50.857 -> [0012.078] Updated board info to DTB
22:07:50.857 -> [0012.081] "pmu-board" doesn't exist, creating
22:07:50.857 -> [0012.087] Updated board info to DTB
22:07:50.857 -> [0012.090] "display-board" doesn't exist, creating
22:07:50.857 -> [0012.096] Updated board info to DTB
22:07:50.857 -> [0012.099] "reset" doesn't exist, creating
22:07:50.857 -> [0012.104] Updated reset info to DTB
22:07:50.857 -> [0012.107] display_console_ioctl: No display init
22:07:50.857 -> [0012.111] display_console_ioctl: No display init
22:07:50.857 -> [0012.116] display_console_ioctl: No display init
22:07:50.857 -> [0012.121] Cmdline: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000
22:07:50.857 -> [0012.155] DTB cmdline: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
22:07:50.857 -> [0012.166] boot image cmdline: root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0
22:07:50.857 -> [0012.177] Updated bootarg info to DTB
22:07:50.857 -> [0012.181] Adding uuid 000000016441f8091000000012010500 to DT
22:07:50.857 -> [0012.190] device_query_partition_size: failed to open partition sd0:RP6 !
22:07:50.857 -> [0012.197] RP6 partition read failed!
22:07:50.857 -> [0012.202] WARNING: Failed to pass NS DRAM ranges to TOS, err: -7
22:07:50.857 -> [0012.208] Updated memory info to DTB
22:07:50.857 -> [0012.213] Updated system-lp0-disable info to DTB
22:07:50.857 -> [0012.221] set vdd_core voltage to 1125 mv
22:07:50.857 -> [0012.225] setting 'vdd-core' regulator to 1125000 micro volts
22:07:50.962 -> [0012.246] could not find regulator
22:07:50.962 -> [0012.250] Found secure-pmc; disable BPMP
22:07:50.962 ->
22:07:50.962 ->
22:07:50.962 -> U-Boot 2016.07-g0eb73f4 (Mar 13 2019 - 00:21:24 -0700)
22:07:50.962 ->
22:07:50.962 -> TEGRA210
22:07:50.962 -> Model: NVIDIA P3450-Porg
22:07:50.962 -> Board: NVIDIA P3450-PORG
22:07:50.962 -> DRAM: 4 GiB
22:07:51.208 -> MMC: Tegra SD/MMC: 0, Tegra SD/MMC: 1
22:07:51.208 -> Using default environment
22:07:51.208 ->
22:07:51.208 -> In: serial
22:07:51.208 -> Out: serial
22:07:51.208 -> Err: serial
22:07:51.208 -> Net: No ethernet found.
22:07:51.519 -> Hit any key to stop autoboot: 2 1 0
22:07:53.560 -> switch to partitions #0, OK
22:07:53.560 -> mmc1 is current device
22:07:54.368 -> Scanning mmc 1:1...
22:07:54.868 -> Found /boot/extlinux/extlinux.conf
22:07:54.868 -> Retrieving file: /boot/extlinux/extlinux.conf
22:07:55.008 -> 239 bytes read in 111 ms (2 KiB/s)
22:07:55.008 -> p3450-porg eMMC boot options
22:07:55.008 -> 1: primary kernel
22:07:55.008 -> Enter choice: 1: primary kernel
22:07:57.988 -> Retrieving file: /boot/initrd
22:07:58.128 -> 0 bytes read in 86 ms (0 Bytes/s)
22:07:58.128 -> Retrieving file: /boot/Image
22:07:59.658 -> 34048008 bytes read in 1528 ms (21.2 MiB/s)
22:07:59.725 -> append: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 rootfstype=ext4 root=/dev/mmcblk0p1 rw rootwait
22:07:59.725 -> ## Flattened Device Tree blob at 83100000
22:07:59.725 -> Booting using the fdt blob at 0x83100000
22:07:59.725 -> reserving fdt memory region: addr=80000000 size=20000
22:07:59.725 -> Using Device Tree in place at 0000000083100000, end 0000000083173e9a
22:07:59.725 ->
22:07:59.725 -> Starting kernel ...
22:07:59.725 ->
22:08:00.775 -> <hit enter to activate fiq debugger>
22:08:00.950 -> [ 0.000000] Booting Linux on physical CPU 0x0
22:08:01.312 -> [ 0.000000] Linux version 4.9.140-tegra (buildbrain@mobile-u64-3531) (gcc version 7.3.1 20180425 [linaro-7.3-2018.05 revision d29120a424ecfbc167ef90065c0eeb7f91977701] (Linaro GCC 7.3-2018.05) ) #1 SMP PREEMPT Wed Mar 13 00:32:22 PDT 2019
22:08:01.312 -> [ 0.000000] Boot CPU: AArch64 Processor [411fd071]
22:08:01.312 -> [ 0.000000] OF: fdt:memory scan node memory@80000000, reg size 48,
22:08:01.312 -> [ 0.000000] OF: fdt: - 80000000 , 7ee00000
22:08:01.312 -> [ 0.000000] OF: fdt: - 100000000 , 7f200000
22:08:01.312 -> [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
22:08:01.312 -> [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb0_carveout': base 0x0000000000000000, size 0 MiB
22:08:01.312 -> [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
22:08:01.312 -> [ 0.000000] OF: fdt:Reserved memory: failed to reserve memory for node 'fb1_carveout': base 0x0000000000000000, size 0 MiB
22:08:01.312 -> [ 0.000000] OF: reserved mem: initialized node vpr-carveout, compatible id nvidia,vpr-carveout
22:08:01.312 -> [ 0.000000] OF: reserved mem: initialized node iram-carveout, compatible id nvidia,iram-carveout
22:08:01.312 -> [ 0.000000] OF: reserved mem: initialized node ramoops_carveout, compatible id nvidia,ramoops
22:08:01.312 -> [ 0.000000] cma: Reserved 64 MiB at 0x00000000fac00000
22:08:01.312 -> [ 0.000000] psci: probing for conduit method from DT.
22:08:01.312 -> [ 0.000000] psci: PSCIv1.0 detected in firmware.
22:08:01.312 -> [ 0.000000] psci: Using standard PSCI v0.2 function IDs
22:08:01.312 -> [ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
22:08:01.312 -> [ 0.000000] psci: SMC Calling Convention v1.1
22:08:01.312 -> [ 0.000000] percpu: Embedded 23 pages/cpu @ffffffc0fefd2000 s53400 r8192 d32616 u94208
22:08:01.312 -> [ 0.000000] CPU features: enabling workaround for ARM erratum 832075
22:08:01.312 -> [ 0.000000] Speculative Store Bypass Disable mitigation not required
22:08:01.312 -> [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1023544
22:08:01.312 -> [ 0.000000] Kernel command line: tegraid=21.1.2.0.0 ddr_die=4096M@2048M section=512M memtype=0 vpr_resize usb_port_owner_info=0 lane_owner_info=0 emc_max_dvfs=0 touch_id=0@63 video=tegrafb no_console_suspend=1 console=ttyS0,115200n8 debug_uartport=lsport,0 earlyprintk=uart8250-32bit,0x70006000 maxcpus=4 usbcore.old_scheme_first=1 lp0_vec=0x1000@0xff780000 core_edp_mv=1125 core_edp_ma=4000 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 root=/dev/mmcblk0p1 rw rootwait console=ttyS0,115200n8 console=tty0 fbcon=map:0 net.ifnames=0 rootfstype=ext4 root=/dev/mmcblk0p1 rw rootwait
22:08:01.312 -> [ 0.000000] log_buf_len individual max cpu contribution: 32768 bytes
22:08:01.312 -> [ 0.000000] log_buf_len total cpu_extra contributions: 98304 bytes
22:08:01.312 -> [ 0.000000] log_buf_len min size: 32768 bytes
22:08:01.312 -> [ 0.000000] log_buf_len: 131072 bytes
22:08:01.312 -> [ 0.000000] early log buf free: 29492(90%)
22:08:01.312 -> [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
22:08:01.312 -> [ 0.000000] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
22:08:01.312 -> [ 0.000000] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
22:08:01.312 -> [ 0.000000] Memory: 3576064K/4159488K available (15166K kernel code, 2914K rwdata, 6616K rodata, 8512K init, 605K bss, 108288K reserved, 475136K cma-reserved)
22:08:01.312 -> [ 0.000000] Virtual kernel memory layout:
22:08:01.312 -> [ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
22:08:01.312 -> [ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbebfff0000 ( 250 GB)
22:08:01.312 -> [ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008f50000 ( 15168 KB)
22:08:01.312 -> [ 0.000000] .rodata : 0xffffff8008f50000 - 0xffffff80095d0000 ( 6656 KB)
22:08:01.312 -> [ 0.000000] .init : 0xffffff80095d0000 - 0xffffff8009e20000 ( 8512 KB)
22:08:01.312 -> [ 0.000000] .data : 0xffffff8009e20000 - 0xffffff800a0f8808 ( 2915 KB)
22:08:01.312 -> [ 0.000000] .bss : 0xffffff800a0f8808 - 0xffffff800a18fe3c ( 606 KB)
22:08:01.312 -> [ 0.000000] fixed : 0xffffffbefe7fd000 - 0xffffffbefec00000 ( 4108 KB)
22:08:01.664 -> [ 0.000000] PCI I/O : 0xffffffbefee00000 - 0xffffffbeffe00000 ( 16 MB)
22:08:01.664 -> [ 0.000000] vmemmap : 0xffffffbf00000000 - 0xffffffc000000000 ( 4 GB maximum)
22:08:01.664 -> [ 0.000000] 0xffffffbf00000000 - 0xffffffbf03fc8000 ( 63 MB actual)
22:08:01.664 -> [ 0.000000] memory : 0xffffffc000000000 - 0xffffffc0ff200000 ( 4082 MB)
22:08:01.664 -> [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
22:08:01.664 -> [ 0.000000] Preemptible hierarchical RCU implementation.
22:08:01.664 -> [ 0.000000] Build-time adjustment of leaf fanout to 64.
22:08:01.664 -> [ 0.000000] RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=4.
22:08:01.664 -> [ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=4
22:08:01.664 -> [ 0.000000] NR_IRQS:64 nr_irqs:64 0
22:08:01.664 -> [ 0.000000] /interrupt-controller@60004000: 192 interrupts forwarded to /interrupt-controller
22:08:01.664 -> [ 0.000000] t210 clock and reset probe
22:08:01.664 -> [ 0.000000] tegra-pmc: get_secure_pmc_setting: done secure_pmc=1
22:08:01.664 -> [ 0.000000] clk_cbus_recalc_rate: no gbus parent
22:08:01.664 -> [ 0.000000] clk_cbus_recalc_rate: no gbus parent
22:08:01.664 -> [ 0.000000] clk_cbus_recalc_rate: no gbus parent
22:08:01.664 -> [ 0.000000] clk_cbus_recalc_rate: no gbus parent
22:08:01.664 -> [ 0.000000] clk_cbus_recalc_rate: no gbus parent
22:08:01.664 -> [ 0.000000] arm_arch_timer: Architected cp15 timer(s) running at 19.20MHz (phys).
22:08:01.664 -> [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
22:08:01.664 -> [ 0.000006] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
22:08:01.664 -> [ 0.001487] Console: colour dummy device 80x25
22:08:01.664 -> [ 0.002332] console [tty0] enabled
22:08:01.664 -> [ 0.002359] kmemleak: Kernel memory leak detector disabled
22:08:01.664 -> [ 0.002386] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
22:08:01.664 -> [ 0.002413] pid_max: default: 32768 minimum: 301
22:08:01.664 -> [ 0.002870] Security Framework initialized
22:08:01.664 -> [ 0.003101] Mount-cache hash table entries: 8192 (order: 4, 65536 bytes)
22:08:01.664 -> [ 0.003121] Mountpoint-cache hash table entries: 8192 (order: 4, 65536 bytes)
22:08:01.664 -> [ 0.004309] ftrace: allocating 46802 entries in 183 pages
22:08:01.664 -> [ 0.175858] ASID allocator initialised with 65536 entries
22:08:01.664 -> [ 0.211288] tegra-id: chipid=22117.
22:08:01.664 -> [ 0.211326] tegra-id: opt_subrevision=0.
22:08:01.664 -> [ 0.211354] Tegra Speedo/IDDQ fuse revision 4
22:08:01.664 -> [ 0.211370] Tegra: CPU Speedo ID 9, SoC Speedo ID 0, GPU Speedo ID 2
22:08:01.664 -> [ 0.211387] Tegra: CPU Process ID 0, SoC Process ID 0, GPU Process ID 0
22:08:01.664 -> [ 0.211402] Tegra: CPU Speedo Value 2018, SoC Speedo Value 1914, GPU Speedo Value 2024
22:08:01.664 -> [ 0.211423] Tegra: CPU IDDQ Value 1620, SoC IDDQ Value 1888, GPU IDDQ Value 2220
22:08:01.664 -> [ 0.211458] Tegra Revision: A02 SKU: 0x8f CPU Process: 0 SoC Process: 0
22:08:01.664 -> [ 0.211484] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts
22:08:01.664 -> [ 0.211518] DTB Build time: Mar 15 2019 09:52:07
22:08:01.664 -> [ 0.261069] CPU1: Booted secondary processor [411fd071]
22:08:01.664 -> [ 0.292965] CPU2: Booted secondary processor [411fd071]
22:08:01.664 -> [ 0.324949] CPU3: Booted secondary processor [411fd071]
22:08:01.664 -> [ 0.325043] Brought up 4 CPUs
22:08:01.664 -> [ 0.325107] SMP: Total of 4 processors activated.
22:08:01.664 -> [ 0.325125] CPU features: detected feature: 32-bit EL0 Support
22:08:01.664 -> [ 0.325400] CPU: All CPU(s) started at EL2
22:08:01.664 -> [ 0.325430] alternatives: patching kernel code
22:08:01.664 -> [ 0.333423] devtmpfs: initialized
22:08:01.664 -> [ 0.367927] Initilizing CustomIPI irq domain
22:08:01.664 -> [ 0.368341] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
22:08:01.664 -> [ 0.368386] futex hash table entries: 1024 (order: 4, 65536 bytes)
22:08:01.664 -> [ 0.378848] pinctrl core: initialized pinctrl subsystem
22:08:01.664 -> [ 0.379488] OS set in device tree is not L4T.
22:08:01.664 -> [ 0.379900] regulator-dummy: no parameters
22:08:01.664 -> [ 0.380179] Initializing plugin-manager
22:08:01.664 -> [ 0.380338] Plugin module not found
22:08:01.664 -> [ 0.380558] node /plugin-manager/fragement@0 match with board >=3448-0000-100
22:08:02.013 -> [ 0.381125] node /plugin-manager/fragment@1 match with board >=3448-0000-101
22:08:02.013 -> [ 0.381882] node /plugin-manager/fragment@5 match with board 3449-0000-200
22:08:02.013 -> [ 0.385133] NET: Registered protocol family 16
22:08:02.013 -> [ 0.386432] pstore: using zlib compression
22:08:02.013 -> [ 0.387065] console [pstore-1] enabled
22:08:02.013 -> [ 0.387081] pstore: Registered ramoops as persistent store backend
22:08:02.013 -> [ 0.387099] ramoops: attached 0x200000@0xb0000000, ecc: 0/0
22:08:02.013 -> [ 0.401086] cpuidle: using governor menu
22:08:02.013 -> [ 0.404907] tegra_smmu 70019000.iommu: Loaded Tegra IOMMU driver
22:08:02.013 -> [ 0.406418] vdso: 2 pages (1 code @ ffffff8008f57000, 1 data @ ffffff8009e24000)
22:08:02.013 -> [ 0.406463] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
22:08:02.013 -> [ 0.409490] atomic_pool_init():622: DMA: preallocated 1024 KiB pool for atomic allocations
22:08:02.013 -> [ 0.411044] tegra_bpmp_of_clk_init: EMC proxy not found.
22:08:02.013 -> [ 0.412013] tegra_powergate_init: DONE
22:08:02.013 -> [ 0.412051] DTS File Name: /dvs/git/dirty/git-master_linux/kernel/kernel-4.9/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t210/porg/kernel-dts/tegra210-p3448-0000-p3449-0000-a02.dts
22:08:02.013 -> [ 0.412088] DTB Build time: Mar 15 2019 09:52:07
22:08:02.013 -> [ 0.413773] Tegra reboot handler registered.
22:08:02.013 -> [ 0.418093] iommu: Adding device tegra-carveouts to group 0
22:08:02.013 -> [ 0.418269] platform tegra-carveouts: domain=ffffffc0f9bf0318 allocates as[0]=ffffffc0f9b980a8
22:08:02.013 -> [ 0.418638] iommu: Adding device smmu_test to group 1
22:08:02.013 -> [ 0.418704] platform smmu_test: domain=ffffffc0f9bf0558 allocates as[0]=ffffffc0f9b98110
22:08:02.013 -> [ 0.419532] mc: mapped MMIO address: 0xffffff800802e000 -> 0x70019000
22:08:02.013 -> [ 0.419609] mc: mapped MMIO address: 0xffffff8008065000 -> 0x7001c000
22:08:02.013 -> [ 0.419683] mc: mapped MMIO address: 0xffffff8008079000 -> 0x7001d000
22:08:02.013 -> [ 0.419706] nv-tegra-mc 70019000.mc: No mssnvlink node
22:08:02.013 -> [ 0.419741] mc-err: mcerr ops are set to t21x
22:08:02.013 -> [ 0.429477] iommu: Adding device 70090000.xusb to group 2
22:08:02.013 -> [ 0.429787] iommu: Adding device 70006000.serial to group 3
22:08:02.013 -> [ 0.429883] platform 70006000.serial: domain=ffffffc0f947e6d8 allocates as[0]=ffffffc0f9b98178
22:08:02.013 -> [ 0.430301] iommu: Adding device 70006040.serial to group 4
22:08:02.013 -> [ 0.430592] iommu: Adding device 70006200.serial to group 5
22:08:02.013 -> [ 0.430824] iommu: Adding device sound to group 6
22:08:02.013 -> [ 0.430890] platform sound: domain=ffffffc0f947ec18 allocates as[0]=ffffffc0f9b981e0
22:08:02.013 -> [ 0.431455] iommu: Adding device 7000d400.spi to group 7
22:08:02.013 -> [ 0.431746] iommu: Adding device 7000d600.spi to group 8
22:08:02.013 -> [ 0.432035] iommu: Adding device 70410000.spi to group 9
22:08:02.013 -> [ 0.432356] iommu: Adding device 50000000.host1x to group 10
22:08:02.013 -> [ 0.432644] iommu: Adding device 54080000.vi to group 11
22:08:02.013 -> [ 0.433084] iommu: Adding device 54600000.isp to group 12
22:08:02.013 -> [ 0.433369] iommu: Adding device 54680000.isp to group 13
22:08:02.013 -> [ 0.433697] iommu: Adding device tegradc.0 to group 14
22:08:02.013 -> [ 0.433771] platform tegradc.0: domain=ffffffc0f948bb58 allocates as[0]=ffffffc0f9b98248
22:08:02.013 -> [ 0.434305] platform tegradc.0: IOVA linear map 0x00000000d7000000(19000000)
22:08:02.013 -> [ 0.434640] iommu: Adding device tegradc.1 to group 15
22:08:02.013 -> [ 0.434707] platform tegradc.1: domain=ffffffc0f948bd98 allocates as[0]=ffffffc0f9b982b0
22:08:02.013 -> [ 0.435238] platform tegradc.1: IOVA linear map 0x00000000d7000000(19000000)
22:08:02.013 -> [ 0.435503] iommu: Adding device 54340000.vic to group 16
22:08:02.013 -> [ 0.435725] iommu: Adding device 544c0000.nvenc to group 17
22:08:02.013 -> [ 0.435936] iommu: Adding device 54500000.tsec to group 18
22:08:02.013 -> [ 0.436159] iommu: Adding device 54100000.tsecb to group 19
22:08:02.013 -> [ 0.436370] iommu: Adding device 54480000.nvdec to group 20
22:08:02.013 -> [ 0.436595] iommu: Adding device 54380000.nvjpg to group 21
22:08:02.013 -> [ 0.437750] iommu: Adding device 546c0000.i2c to group 22
22:08:02.013 -> [ 0.438094] iommu: Adding device 57000000.gpu to group 23
22:08:02.013 -> [ 0.438159] platform 57000000.gpu: domain=ffffffc0f9495d98 allocates as[0]=ffffffc0f9b98318
22:08:02.013 -> [ 0.438217] platform 57000000.gpu: domain=ffffffc0f9495d98 allocates as[1]=ffffffc0f9b98380
22:08:02.362 -> [ 0.438279] platform 57000000.gpu: domain=ffffffc0f9495d98 allocates as[2]=ffffffc0f9b983e8
22:08:02.362 -> [ 0.438337] platform 57000000.gpu: domain=ffffffc0f9495d98 allocates as[3]=ffffffc0f9b98450
22:08:02.362 -> [ 0.439249] tegra-pmc 7000e400.pmc: i2c-thermtrip node not found, emergency thermal reset disabled.
22:08:02.362 -> [ 0.439288] tegra-pmc 7000e400.pmc: scratch reg offset dts data not present
22:08:02.362 -> [ 0.439315] tegra-pmc: ### PMC reset source: TEGRA_POWER_ON_RESET
22:08:02.362 -> [ 0.439335] tegra-pmc: ### PMC reset level: TEGRA_RESET_LEVEL_WARM
22:08:02.362 -> [ 0.439352] tegra-pmc: ### PMC reset status reg: 0x0
22:08:02.362 -> [ 0.489145] padctrl padctrl.0: Pad control driver tegra-pmc-padctrl registered
22:08:02.362 -> [ 0.489181] tegra-pmc: Clear bootloader IO dpd settings
22:08:02.362 -> [ 0.489216] tegra-pmc 7000e400.pmc: IO padctrl driver initialized
22:08:02.362 -> [ 0.489295] tegra-pmc 7000e400.pmc: PMC: Successfully configure bootrom reset commands
22:08:02.362 -> [ 0.489613] iommu: Adding device 70012000.se to group 24
22:08:02.362 -> [ 0.490481] iommu: Adding device 7000c000.i2c to group 25
22:08:02.362 -> [ 0.490809] iommu: Adding device 7000c400.i2c to group 26
22:08:02.362 -> [ 0.491141] iommu: Adding device 7000c500.i2c to group 27
22:08:02.362 -> [ 0.491458] iommu: Adding device 7000c700.i2c to group 28
22:08:02.362 -> [ 0.491815] iommu: Adding device 7000d000.i2c to group 29
22:08:02.362 -> [ 0.492138] iommu: Adding device 7000d100.i2c to group 30
22:08:02.362 -> [ 0.492494] iommu: Adding device sdhci-tegra.0 to group 31
22:08:02.362 -> [ 0.492568] platform sdhci-tegra.0: domain=ffffffc0f9524f18 allocates as[0]=ffffffc0f9b984b8
22:08:02.362 -> [ 0.493517] iommu: Adding device 700d0000.xudc to group 32
22:08:02.362 -> [ 0.499706] vdd-ac-bat: 5000 mV
22:08:02.362 -> [ 0.500181] vdd-5v0-sys: 5000 mV
22:08:02.362 -> [ 0.501381] vdd-5v0-hdmi: supplied by vdd-5v0-sys
22:08:02.362 -> [ 0.501475] vdd-5v0-hdmi: 5000 mV
22:08:02.362 -> [ 0.501950] vdd-1v8: 1800 mV
22:08:02.362 -> [ 0.502464] vdd-fan: supplied by vdd-5v0-sys
22:08:02.362 -> [ 0.502521] vdd-fan: 5000 mV
22:08:02.362 -> [ 0.503009] vdd-usb-vbus: supplied by vdd-5v0-sys
22:08:02.362 -> [ 0.503084] vdd-usb-vbus: 5000 mV
22:08:02.362 -> [ 0.503683] vdd-usb-vbus2: 5000 mV
22:08:02.362 -> [ 0.533905] HugeTLB registered 2 MB page size, pre-allocated 0 pages
22:08:02.362 -> [ 0.536381] GPIO line 151 (camera-control-output-low) hogged as output/low
22:08:02.362 -> [ 0.536757] gpiochip_setup_dev: registered GPIOs 0 to 255 on device: gpiochip0 (tegra-gpio)
22:08:02.362 -> [ 0.544796] eventlib_kernel: keventlib is initialized, test id: 0
22:08:02.362 -> [ 0.546659] SCSI subsystem initialized
22:08:02.362 -> [ 0.547282] usbcore: registered new interface driver usbfs
22:08:02.362 -> [ 0.547357] usbcore: registered new interface driver hub
22:08:02.362 -> [ 0.547451] usbcore: registered new device driver usb
22:08:02.362 -> [ 0.551538] max77620 4-003c: PMIC Version OTP:0x35 and ES:0x8
22:08:02.362 -> [ 0.553322] random: fast init done
22:08:02.362 -> [ 0.556481] vdd-core: 600 <--> 1162 mV at 1125 mV
22:08:02.362 -> [ 0.557780] vdd-ddr-1v1: Bringing 1125000uV into 1150000-1150000uV
22:08:02.362 -> [ 0.560335] vdd-ddr-1v1: 1150 mV
22:08:02.362 -> [ 0.565082] vdd-pre-reg-1v35: 1350 mV
22:08:02.362 -> [ 0.569083] vdd-1v8: 1800 mV
22:08:02.362 -> [ 0.569350] vdd-1v8: Failed to create debugfs directory
22:08:02.362 -> [ 0.573081] avdd-sys-1v2: 1200 mV
22:08:02.362 -> [ 0.577083] vdd-pex-1v0: 1050 mV
22:08:02.362 -> [ 0.577856] vddio-sdmmc-ap: 1800 <--> 3300 mV at 3300 mV
22:08:02.362 -> [ 0.578498] max77620-ldo3: at 3100 mV
22:08:02.362 -> [ 0.581085] vdd-rtc: 850 <--> 1100 mV at 1000 mV
22:08:02.362 -> [ 0.581732] max77620-ldo5: at 3100 mV
22:08:02.362 -> [ 0.582374] max77620-ldo6: at 2800 mV
22:08:02.362 -> [ 0.585084] avdd-1v05-pll: 1050 mV
22:08:02.362 -> [ 0.589082] avdd-io-hdmi-dp: 1050 mV
22:08:02.362 -> [ 0.590649] GPIO line 505 (spmic-default-output-high) hogged as output/high
22:08:02.362 -> [ 0.590938] gpiochip_setup_dev: registered GPIOs 504 to 511 on device: gpiochip1 (max77620-gpio)
22:08:02.362 -> [ 0.593012] max77620 4-003c: max77620 probe successful
22:08:02.362 -> [ 0.595253] i2c i2c-6: Unbalanced pm_runtime_enable!
22:08:02.362 -> [ 0.595813] media: Linux media interface: v0.10
22:08:02.362 -> [ 0.595880] Linux video capture interface: v2.00
22:08:02.362 -> [ 0.596785] pps_core: LinuxPPS API ver. 1 registered
22:08:02.362 -> [ 0.596812] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
22:08:02.362 -> [ 0.596854] PTP clock support registered
22:08:02.362 -> [ 0.600147] tegra_fiq_debugger_init: found FIQ source (IRQ 98)
22:08:02.677 -> [ 0.606398] tegra210-emc 7001b000.external-memory-controller: validated EMC DFS table
22:08:02.677 -> [ 0.607185] Advanced Linux Sound Architecture Driver Initialized.
22:08:02.677 -> [ 0.607824] Bluetooth: Core ver 2.22
22:08:02.677 -> [ 0.607892] NET: Registered protocol family 31
22:08:02.677 -> [ 0.607909] Bluetooth: HCI device and connection manager initialized
22:08:02.677 -> [ 0.607935] Bluetooth: HCI socket layer initialized
22:08:02.677 -> [ 0.607956] Bluetooth: L2CAP socket layer initialized
22:08:02.677 -> [ 0.607994] Bluetooth: SCO socket layer initialized
22:08:02.677 -> [ 0.609721] tegra210_dvfs: no clock found for sdmmc2_ddr
22:08:02.677 -> [ 0.609758] tegra210_dvfs: no clock found for sdmmc4_ddr
22:08:02.677 -> [ 0.609820] tegra210_dvfs: no clock found for sdmmc1_ddr
22:08:02.677 -> [ 0.609848] tegra210_dvfs: no clock found for sdmmc3_ddr
22:08:02.677 -> [ 0.612382] tegra_dvfs: Unable to get vdd-cpu rail for step info, defering probe
22:08:02.677 -> [ 0.613719] vdd-3v3-sys: supplied by vdd-5v0-sys
22:08:02.677 -> [ 0.613801] vdd-3v3-sys: 3300 mV
22:08:02.677 -> [ 0.614071] vdd-1v8: supplied by vdd-3v3-sys
22:08:02.677 -> [ 0.617159] vdd-usb-vbus2: supplied by vdd-3v3-sys
22:08:02.677 -> [ 0.617654] vdd-3v3-sd: supplied by vdd-3v3-sys
22:08:02.677 -> [ 0.617705] vdd-3v3-sd: 3300 mV
22:08:02.677 -> [ 0.618925] avdd-io-edp-1v05: supplied by avdd-1v05-pll
22:08:02.677 -> [ 0.618980] avdd-io-edp-1v05: 1050 mV
22:08:02.677 -> [ 0.619475] vdd-usb-hub-en: supplied by vdd-1v8
22:08:02.677 -> [ 0.619526] vdd-usb-hub-en: 5000 mV
22:08:02.677 -> [ 0.620859] camchar: rtcpu character device driver loaded
22:08:02.677 -> [ 0.621612] extcon-gpio-states extcon:extcon@1: Cable state:0, cable id:0
22:08:02.677 -> [ 0.622930] clocksource: Switched to clocksource arch_sys_counter
22:08:02.677 -> [ 0.662185] VFS: Disk quotas dquot_6.6.0
22:08:02.677 -> [ 0.662346] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
22:08:02.677 -> [ 0.662869] nvmap_heap_init: nvmap_heap_init: created heap block cache
22:08:02.677 -> [ 0.663354] dma_declare_coherent_resizable_cma_memory:324: resizable heap=vpr, base=0x00000000d7000000, size=0x19000000
22:08:02.677 -> [ 0.663406] dma-vpr: heap size is not multiple of cma_chunk_size heap_info->num_chunks (13) rem_chunk_size(0x1000000)
22:08:02.677 -> [ 0.663614] cma: enabled page replacement for spfn=d7000, epfn=f0000
22:08:02.677 -> [ 0.663642] dma_declare_coherent_resizable_cma_memory:373: resizable cma heap=vpr create successful
22:08:02.677 -> [ 0.663669] tegra-carveouts tegra-carveouts: assigned reserved memory node vpr-carveout
22:08:02.677 -> [ 0.663719] tegra-carveouts tegra-carveouts: iram :dma coherent mem declare 0x0000000040001000,258048
22:08:02.677 -> [ 0.663745] tegra-carveouts tegra-carveouts: assigned reserved memory node iram-carveout
22:08:02.677 -> [ 0.663777] nvmap: nvmap_select_cache_ops() nvmap cache ops set to set/ways
22:08:02.677 -> [ 0.663799] nvmap_page_pool_init: Total RAM pages: 1012800
22:08:02.677 -> [ 0.663817] nvmap_page_pool_init: nvmap page pool size: 126600 pages (494 MB)
22:08:02.677 -> [ 0.663926] nvmap_background_zero_thread: PP zeroing thread starting.
22:08:02.677 -> [ 0.664415] misc nvmap: created heap iram base 0x0000000040001000 size (252KiB)
22:08:02.677 -> [ 0.665353] misc nvmap: created heap vpr base 0x00000000d7000000 size (409600KiB)
22:08:02.677 -> [ 0.673623] thermal thermal_zone0: Registering thermal zone thermal_zone0 for type AO-therm
22:08:02.677 -> [ 0.674037] thermal thermal_zone1: Registering thermal zone thermal_zone1 for type CPU-therm
22:08:02.677 -> [ 0.674306] thermal thermal_zone2: Registering thermal zone thermal_zone2 for type GPU-therm
22:08:02.677 -> [ 0.674535] thermal thermal_zone3: Registering thermal zone thermal_zone3 for type PLL-therm
22:08:02.677 -> [ 0.674727] thermal thermal_zone4: Registering thermal zone thermal_zone4 for type PMIC-Die
22:08:02.677 -> [ 0.675056] pre_t19x_iso_plat_init(): iso emc max clk=1600000KHz
22:08:02.677 -> [ 0.675078] pre_t19x_iso_plat_init(): max_iso_bw=33280000KB
22:08:02.677 -> [ 0.675520] NET: Registered protocol family 2
22:08:02.677 -> [ 0.676489] TCP established hash table entries: 32768 (order: 6, 262144 bytes)
22:08:02.677 -> [ 0.676729] TCP bind hash table entries: 32768 (order: 7, 524288 bytes)
22:08:02.677 -> [ 0.677232] TCP: Hash tables configured (established 32768 bind 32768)
22:08:02.677 -> [ 0.677394] UDP hash table entries: 2048 (order: 4, 65536 bytes)
22:08:02.677 -> [ 0.677494] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
22:08:02.677 -> [ 0.677934] NET: Registered protocol family 1
22:08:03.026 -> [ 0.678741] RPC: Registered named UNIX socket transport module.
22:08:03.026 -> [ 0.678771] RPC: Registered udp transport module.
22:08:03.026 -> [ 0.678788] RPC: Registered tcp transport module.
22:08:03.026 -> [ 0.678805] RPC: Registered tcp NFSv4.1 backchannel transport module.
22:08:03.026 -> [ 0.679104] Trying to unpack rootfs image as initramfs...
22:08:03.026 -> [ 0.688440] host1x 50000000.host1x: initialized
22:08:03.026 -> [ 0.690226] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
22:08:03.026 -> [ 0.693419] audit: initializing netlink subsys (disabled)
22:08:03.026 -> [ 0.693532] audit: type=2000 audit(0.543:1): initialized
22:08:03.026 -> [ 0.694279] workingset: timestamp_bits=46 max_order=20 bucket_order=0
22:08:03.026 -> [ 0.704405] squashfs: version 4.0 (2009/01/31) Phillip Lougher
22:08:03.026 -> [ 0.705926] ntfs: driver 2.1.32 [Flags: R/W].
22:08:03.026 -> [ 0.706727] 9p: Installing v9fs 9p2000 file system support
22:08:03.026 -> [ 0.709938] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 240)
22:08:03.026 -> [ 0.710097] io scheduler noop registered
22:08:03.026 -> [ 0.710428] io scheduler cfq registered (default)
22:08:03.026 -> [ 0.713308] gic 702f9000.agic: GIC IRQ controller registered
22:08:03.026 -> [ 0.716134] iommu: Adding device 702ef000.adsp to group 33
22:08:03.026 -> [ 0.722866] iommu: Adding device aconnect@702c0000:adsp_audio to group 34
22:08:03.026 -> [ 0.723086] tegra-aconnect aconnect@702c0000: Tegra ACONNECT bus registered
22:08:03.026 -> [ 0.723761] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_SKU_CALIB_0 = 0x7269c10
22:08:03.026 -> [ 0.723796] tegra-xusb-padctl 7009f000.xusb_padctl: TEGRA_FUSE_USB_CALIB_EXT_0 = 0x4
22:08:03.026 -> [ 0.725407] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.0, lane = usb2-0, function = xusb
22:08:03.026 -> [ 0.725539] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.1, lane = usb2-1, function = xusb
22:08:03.026 -> [ 0.725660] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-usb2.2, lane = usb2-2, function = xusb
22:08:03.026 -> [ 0.725877] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.3, lane = pcie-0, function = pcie-x1
22:08:03.026 -> [ 0.725990] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.4, lane = pcie-1, function = pcie-x4
22:08:03.026 -> [ 0.726103] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.5, lane = pcie-2, function = pcie-x4
22:08:03.026 -> [ 0.726213] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.6, lane = pcie-3, function = pcie-x4
22:08:03.026 -> [ 0.726322] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.7, lane = pcie-4, function = pcie-x4
22:08:03.026 -> [ 0.726426] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.8, lane = pcie-5, function = xusb
22:08:03.026 -> [ 0.726538] tegra-xusb-padctl 7009f000.xusb_padctl: dev = phy-pcie.9, lane = pcie-6, function = xusb
22:08:03.026 -> [ 0.732951] tegra-pwm 7000a000.pwm: PWM clk cannot sleep in ops
22:08:03.026 -> [ 0.734297] tegra-dfll-pwm 70110000.pwm: DFLL pwm-rate: 12800000
22:08:03.026 -> [ 0.736204] tegra-pcie 1003000.pcie-controller: 4x1, 1x1 configuration
22:08:03.026 -> [ 0.737515] tegra-pcie 1003000.pcie-controller: PCIE: Enable power rails
22:08:03.026 -> [ 0.737868] tegra-pcie 1003000.pcie-controller: probing port 0, using 4 lanes
22:08:03.026 -> [ 0.739092] tegra-pcie 1003000.pcie-controller: probing port 1, using 1 lanes
22:08:03.026 -> [ 0.739358] tegra_camera_platform tegra-camera-platform: tegra_camera_probe:camera_platform_driver probe
22:08:03.026 -> [ 0.739616] misc tegra_camera_ctrl: tegra_camera_isomgr_register isp_iso_bw=1500000, vi_iso_bw=750000, max_bw=1500000
22:08:03.026 -> [ 0.739885] Adding domain tsec-pd to PM domain host1x-pd
22:08:03.026 -> [ 0.742808] tsec 54500000.tsec: initialized
22:08:03.026 -> [ 0.744298] tsec 54100000.tsecb: initialized
22:08:03.026 -> [ 0.745000] Adding domain nvdec-pd to PM domain host1x-pd
22:08:03.026 -> [ 0.748124] nvdec 54480000.nvdec: initialized
22:08:03.026 -> [ 0.749252] Adding domain vic03-pd to PM domain host1x-pd
22:08:03.026 -> [ 0.749454] Adding domain msenc-pd to PM domain host1x-pd
22:08:03.026 -> [ 0.749636] Adding domain nvjpg-pd to PM domain host1x-pd
22:08:03.026 -> [ 0.753366] falcon 54340000.vic: initialized
22:08:03.026 -> [ 0.754599] falcon 544c0000.nvenc: initialized
22:08:03.026 -> [ 0.756002] falcon 54380000.nvjpg: initialized
22:08:03.026 -> [ 0.760616] tegradc tegradc.0: disp0 connected to head0->/host1x/sor1
22:08:03.026 -> [ 0.760740] display board info: id 0x0, fab 0x0
22:08:03.371 -> [ 0.760812] generic_infoframe_type: 0x87
22:08:03.371 -> [ 0.760947] tegradc tegradc.0: DT parsed successfully
22:08:03.371 -> [ 0.761012] tegradc tegradc.0: Display dc.ffffff800ab40000 registered with id=0
22:08:03.371 -> [ 0.764287] tegradc tegradc.0: probed
22:08:03.371 -> [ 0.768828] tegra-apbdma 60020000.dma: Tegra20 APB DMA driver register 32 channels
22:08:03.371 -> [ 0.773469] tegra-adma 702e2000.adma: Tegra210 ADMA driver registered 10 channels
22:08:03.371 -> [ 0.774353] tegra-fuse-burn 7000f800.efuse:efuse-burn: Fuse burn driver initialized
22:08:03.371 -> [ 0.774702] kfuse 7000fc00.kfuse: initialized
22:08:03.371 -> [ 0.776229] tegra-pmc-iopower pmc-iopower: Regulator supply iopower-dbg-supply not available
22:08:03.371 -> [ 0.777280] tegra-pmc-iopower pmc-iopower: NO_IOPOWER setting 0x0
22:08:03.371 -> [ 0.778595] tegra-dfll-pwm 70110000.pwm: DFLL_PWM regulator is available now
22:08:03.371 -> [ 0.778638] vdd-cpu: 708 <--> 1322 mV at 708 mV
22:08:03.371 -> [ 0.779193] pwm-regulator pwm_regulators:pwm-regulator@0: PWM regulator registration passed
22:08:03.371 -> [ 0.780951] vdd-gpu: applied init 1000000uV constraint
22:08:03.371 -> [ 0.781003] vdd-gpu: 708 <--> 1323 mV at 997 mV
22:08:03.371 -> [ 0.781420] pwm-regulator pwm_regulators:pwm-regulator@1: PWM regulator registration passed
22:08:03.371 -> [ 0.786078] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
22:08:03.371 -> [ 0.786264] No Device Node present for smmu client: serial8250 !!
22:08:03.371 -> [ 0.786293] platform serial8250: No iommus property found in DT node, got swgids from fixup(101004000)
22:08:03.371 -> [ 0.786409] iommu: Adding device serial8250 to group 35
22:08:03.371 -> [ 0.789772] console [ttyS0] disabled
22:08:03.371 -> [ 0.789920] 70006000.serial: ttyS0 at MMIO 0x70006000 (irq = 63, base_baud = 25500000) is a Tegra
22:08:03.371 -> [ 1.263942] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
22:08:03.371 -> [ 1.668272] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
22:08:03.371 -> [ 2.072628] tegra-pcie 1003000.pcie-controller: link 0 down, retrying
22:08:03.371 -> [ 2.074645] tegra-pcie 1003000.pcie-controller: link 0 down, ignoring
22:08:03.371 -> [ 2.075085] tegra-pcie 1003000.pcie-controller: PCI host bridge to bus 0000:00
22:08:03.371 -> [ 2.075097] pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
22:08:03.371 -> [ 2.075101] pci_bus 0000:00: root bus resource [mem 0x13000000-0x1fffffff]
22:08:03.371 -> [ 2.075107] pci_bus 0000:00: root bus resource [mem 0x20000000-0x3fffffff pref]
22:08:03.371 -> [ 2.075112] pci_bus 0000:00: root bus resource [bus 00-ff]
22:08:03.371 -> [ 2.075520] pci 0000:00:02.0: bridge configuration invalid ([bus 00-00]), reconfiguring
22:08:03.371 -> [ 2.087121] pci 0000:00:02.0: BAR 14: assigned [mem 0x13000000-0x130fffff]
22:08:03.371 -> [ 2.087126] pci 0000:00:02.0: BAR 13: assigned [io 0x1000-0x1fff]
22:08:03.371 -> [ 2.087137] pci 0000:01:00.0: BAR 4: assigned [mem 0x13000000-0x13003fff 64bit]
22:08:03.371 -> [ 2.087164] pci 0000:01:00.0: BAR 2: assigned [mem 0x13004000-0x13004fff 64bit]
22:08:03.371 -> [ 2.087187] pci 0000:01:00.0: BAR 0: assigned [io 0x1000-0x10ff]
22:08:03.371 -> [ 2.087199] pci 0000:00:02.0: PCI bridge to [bus 01]
22:08:03.371 -> [ 2.087205] pci 0000:00:02.0: bridge window [io 0x1000-0x1fff]
22:08:03.371 -> [ 2.087212] pci 0000:00:02.0: bridge window [mem 0x13000000-0x130fffff]
22:08:03.371 -> [ 2.087958] pcieport 0000:00:02.0: Signaling PME through PCIe PME interrupt
22:08:03.371 -> [ 2.087963] pci 0000:01:00.0: Signaling PME through PCIe PME interrupt
22:08:03.371 -> [ 3.137639] console [ttyS0] enabled
22:08:03.371 -> [ 3.138036] Console: switching to colour frame buffer device 80x30
22:08:03.371 -> [ 3.139165] 70006040.serial: ttyTHS1 at MMIO 0x70006040 (irq = 64, base_baud = 0) is a TEGRA_UART
22:08:03.371 -> [ 3.139532] serial-tegra 70006200.serial: RX in PIO mode
22:08:03.371 -> [ 3.139640] 70006200.serial: ttyTHS2 at MMIO 0x70006200 (irq = 65, base_baud = 0) is a TEGRA_UART
22:08:03.371 -> [ 3.140719] [drm] Initialized
22:08:03.371 -> [ 3.168167] brd: module loaded
22:08:03.371 -> [ 3.177382] tegradc tegradc.0: fb registered
22:08:03.371 -> [ 3.182709] loop: module loaded
22:08:03.371 -> [ 3.183318] tegradc tegradc.1: disp1 connected to head1->/host1x/sor
22:08:04.221 -> [ 3.183390] tegradc tegradc.1: No lt-data, using default setting
22:08:04.221 -> [ 3.183414] tegradc tegradc.1: No hpd-gpio in DT
22:08:04.221 -> [ 3.183444] tegradc tegradc.1: DT parsed successfully
22:08:04.221 -> [ 3.183497] tegradc tegradc.1: Display dc.ffffff800f4c0000 registered with id=1
22:08:04.221 -> [ 3.184905] tegradc tegradc.1: dpd enable lookup fail:-19
22:08:04.221 -> [ 3.691783] tegradc tegradc.1: probed
22:08:04.221 -> [ 3.692121] Host read timeout at address 545c00c4
22:08:04.221 -> [ 3.729209] tegradc tegradc.1: fb registered
22:08:04.221 -> [ 3.729340] tegra_profiler: version: 1.132, samples/io: 46/26
22:08:04.221 -> [ 3.729495] tegra_profiler: auth: init
22:08:04.221 -> [ 3.730869] THERMAL EST: found 2 subdevs
22:08:04.221 -> [ 3.730876] THERMAL EST num_resources: 0
22:08:04.221 -> [ 3.730881] [THERMAL EST subdev 0]
22:08:04.221 -> [ 3.730887] [THERMAL EST subdev 1]
22:08:04.221 -> [ 3.731386] thermal thermal_zone5: Registering thermal zone thermal_zone5 for type thermal-fan-est
22:08:04.221 -> [ 3.731388] THERMAL EST: thz register success.
22:08:04.221 -> [ 3.731549] THERMAL EST: end of probe, return err: 0
22:08:04.221 -> [ 3.732731] hisi_sas: driver version v1.6
22:08:04.221 -> [ 3.736815] tegra-qspi 70410000.spi: Prod settings list not found
22:08:04.221 -> [ 3.738036] qspi_mtd spi32766.0: MX25U3235F (4096 Kbytes)
22:08:04.221 -> [ 3.738044] qspi_mtd spi32766.0: mtd .name = spi32766.0, .size = 0x400000 (4MiB) .erasesize = 0x00001000 (4KiB) .numeraseregions = 0
22:08:04.221 -> [ 3.741106] libphy: Fixed MDIO Bus: probed
22:08:04.221 -> [ 3.741711] tun: Universal TUN/TAP device driver, 1.6
22:08:04.221 -> [ 3.741713] tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
22:08:04.221 -> [ 3.743133] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
22:08:04.221 -> [ 3.743136] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
22:08:04.221 -> [ 3.743193] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.4.0-k
22:08:04.221 -> [ 3.743196] igb: Copyright (c) 2007-2014 Intel Corporation.
22:08:04.221 -> [ 3.743252] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
22:08:04.221 -> [ 3.743254] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
22:08:04.221 -> [ 3.743305] Intel(R) 10GbE PCI Express Linux Network Driver - version 4.6.4
22:08:04.221 -> [ 3.743307] Copyright(c) 1999 - 2017 Intel Corporation.
22:08:04.221 -> [ 3.744213] r8168 0000:01:00.0: enabling device (0000 -> 0003)
22:08:04.221 -> [ 3.744244] r8168 Gigabit Ethernet driver 8.045.08-NAPI loaded
22:08:04.221 -> [ 3.758407] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Invalid ethernet address 00:00:00:00:00:00, trying device tree node
22:08:04.221 -> [ 3.758554] r8168 0000:01:00.0 (unnamed net_device) (uninitialized): Found valid ethernet address 00:04:4b:e4:40:66 from device tree
22:08:04.221 -> [ 3.759197] r8168: This product is covered by one or more of the following patents: US6,570,884, US6,115,776, and US6,327,625.
22:08:04.221 -> [ 3.759234] r8168 Copyright (C) 2017 Realtek NIC software team <nicfae@realtek.com>
22:08:04.221 -> [ 3.759234] This program comes with ABSOLUTELY NO WARRANTY; for details, please see <http://www.gnu.org/licenses/>.
22:08:04.221 -> [ 3.759234] This is free software, and you are welcome to redistribute it under certain conditions; see <http://www.gnu.org/licenses/>.
22:08:04.221 -> [ 3.759865] PPP generic driver version 2.4.2
22:08:04.221 -> [ 3.760081] PPP BSD Compression module registered
22:08:04.221 -> [ 3.760086] PPP Deflate Compression module registered
22:08:04.221 -> [ 3.760128] PPP MPPE Compression module registered
22:08:04.221 -> [ 3.760134] NET: Registered protocol family 24
22:08:04.221 -> [ 3.760204] usbcore: registered new interface driver r8152
22:08:04.221 -> [ 3.760244] usbcore: registered new interface driver asix
22:08:04.221 -> [ 3.760305] usbcore: registered new interface driver ax88179_178a
22:08:04.221 -> [ 3.760346] usbcore: registered new interface driver cdc_ether
22:08:04.221 -> [ 3.760386] usbcore: registered new interface driver net1080
22:08:04.221 -> [ 3.760434] usbcore: registered new interface driver cdc_subset
22:08:04.221 -> [ 3.760471] usbcore: registered new interface driver zaurus
22:08:04.221 -> [ 3.760526] usbcore: registered new interface driver cdc_ncm
22:08:04.221 -> [ 3.760696] VFIO - User Level meta-driver version: 0.3
22:08:04.221 -> [ 3.762024] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
22:08:04.221 -> [ 3.762049] ehci-pci: EHCI PCI platform driver
22:08:04.221 -> [ 3.762094] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
22:08:04.570 -> [ 3.762106] ohci-pci: OHCI PCI platform driver
22:08:04.570 -> [ 3.762148] ohci-platform: OHCI generic platform driver
22:08:04.570 -> [ 3.764920] tegra-xusb 70090000.xusb: USB2 port 0 has OTG_CAP
22:08:04.570 -> [ 3.765540] tegra-xusb-padctl 7009f000.xusb_padctl: enabled OTG on UTMI pad 0
22:08:04.570 -> [ 3.766706] tegra-xusb 70090000.xusb: extcon 0: ffffffc0f9067400 id
22:08:04.570 -> [ 3.766817] tegra-xusb 70090000.xusb: Direct firmware load for tegra21x_xusb_firmware failed with error -2
22:08:04.570 -> [ 3.766821] tegra-xusb 70090000.xusb: Falling back to user helper
22:08:04.570 -> [ 3.768139] usbcore: registered new interface driver uas
22:08:04.570 -> [ 3.768197] usbcore: registered new interface driver usb-storage
22:08:04.570 -> [ 3.768308] usbcore: registered new interface driver usbserial
22:08:04.570 -> [ 3.771467] tegra-xudc-new 700d0000.xudc: device count: 1
22:08:04.570 -> [ 3.772771] tegra-xudc-new 700d0000.xudc: USB charger detection disabled
22:08:04.570 -> [ 3.772783] tegra-xudc-new 700d0000.xudc: vbus state: 0
22:08:04.570 -> [ 3.772817] tegra-xudc-new 700d0000.xudc: entering ELPG
22:08:04.570 -> [ 3.773070] tegra-xudc-new 700d0000.xudc: entering ELPG done
22:08:04.570 -> [ 3.773756] mousedev: PS/2 mouse device common for all mice
22:08:04.570 -> [ 3.773840] usbcore: registered new interface driver xpad
22:08:04.570 -> [ 3.905147] max77686-rtc max77620-rtc: rtc core: registered max77620-rtc as rtc0
22:08:04.570 -> [ 3.907734] rtc rtc1: alarm rtc device
22:08:04.570 -> [ 3.907753] tegra_rtc 7000e000.rtc: rtc core: registered 7000e000.rtc as rtc1
22:08:04.570 -> [ 3.907777] tegra_rtc 7000e000.rtc: Tegra internal Real Time Clock
22:08:04.570 -> [ 3.908350] i2c /dev entries driver
22:08:04.570 -> [ 3.910130] imx219 6-0010: tegracam sensor driver:imx219_v2.0.6
22:08:04.570 -> [ 3.933453] tegra-vii2c 546c0000.i2c: no acknowledge from address 0x10
22:08:04.570 -> [ 3.933521] imx219 6-0010: imx219_board_setup: error during i2c read probe (-121)
22:08:04.570 -> [ 3.933549] imx219 6-0010: board setup failed
22:08:04.570 -> [ 3.933649] imx219: probe of 6-0010 failed with error -121
22:08:04.570 -> [ 3.934649] max77620-power max77620-power: Event recorder REG_NVERC : 0x0
22:08:04.570 -> [ 3.937599] tegra_soctherm 700e2000.soctherm: pllx_offset tz:0 max:14, min:2
22:08:04.570 -> [ 3.937604] tegra_soctherm 700e2000.soctherm: pllx_offset tz:2 max:8, min:4
22:08:04.570 -> [ 3.938039] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
22:08:04.570 -> [ 3.938055] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when cpu reaches 102500 mC
22:08:04.570 -> [ 3.938063] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when cpu reaches 100500 mC
22:08:04.570 -> [ 3.938192] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
22:08:04.570 -> [ 3.938201] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when gpu reaches 103000 mC
22:08:04.570 -> [ 3.938206] tegra_soctherm 700e2000.soctherm: throttrip: will throttle when gpu reaches 101000 mC
22:08:04.570 -> [ 3.938347] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
22:08:04.570 -> [ 3.938356] tegra_soctherm 700e2000.soctherm: thermtrip: will shut down when pll reaches 127000 mC
22:08:04.570 -> [ 3.938360] tegra_soctherm 700e2000.soctherm: throttrip: pll: missing hot temperature
22:08:04.570 -> [ 3.938566] tegra_soctherm 700e2000.soctherm: failed to register sensor: -19
22:08:04.570 -> [ 3.939485] tegra_aotag tegra-aotag: Registering sensor 0
22:08:04.570 -> [ 3.939544] tegra_aotag tegra-aotag: Invalid temp readout
22:08:04.570 -> [ 3.939572] tegra_aotag tegra-aotag: Invalid temp readout
22:08:04.570 -> [ 3.939589] tegra_aotag tegra-aotag: Bound to TZ : ID 0
22:08:04.570 -> [ 3.939598] tegra_aotag tegra-aotag: Probe done [SUCCESS]:0
22:08:04.570 -> [ 3.940504] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
22:08:04.570 -> [ 3.940523] tegra_dfll_action dfll-cdev-cap: Tegra DFLL 'cap cooling device' registered
22:08:04.570 -> [ 3.940711] tegra_aotag tegra-aotag: Invalid temp readout
22:08:04.570 -> [ 3.940741] tegra_dfll_action dfll-cdev-floor: Tegra DFLL 'floor cooling device' registered
22:08:04.570 -> [ 3.941185] parse_throttle_dt_data: Num cap clks = 6
22:08:04.570 -> [ 3.941191] parse_throttle_dt_data: clk=cclk_g type=2
22:08:04.570 -> [ 3.941206] parse_throttle_dt_data: clk=gpu type=4
22:08:04.570 -> [ 3.941234] parse_throttle_dt_data: clk=cap.throttle.c2bus type=0
22:08:04.889 -> [ 3.941253] parse_throttle_dt_data: clk=cap.throttle.c3bus type=0
22:08:04.889 -> [ 3.941273] parse_throttle_dt_data: clk=cap.throttle.sclk type=0
22:08:04.889 -> [ 3.941276] parse_throttle_dt_data: clk=emc type=3
22:08:04.889 -> [ 3.941726] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
22:08:04.889 -> [ 3.941831] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
22:08:04.889 -> [ 3.942002] tegra_throttle_probe: probe successful. #cdevs=4
22:08:04.889 -> [ 3.942803] FAN dev name: pwm-fan
22:08:04.889 -> [ 3.942856] FAN:gpio request success.
22:08:04.889 -> [ 3.942960] pwm_fan_driver pwm-fan: cap state:7, cap pwm:255
22:08:04.889 -> [ 3.943285] pwm_fan_driver pwm-fan: got pwm for fan. polarity is normal
22:08:04.889 -> [ 3.943479] pwm_fan_driver pwm-fan: fan tach request irq success
22:08:04.889 -> [ 3.943488] pwm_fan_driver pwm-fan: tach period: 1000
22:08:04.889 -> [ 3.943575] pwm_fan_driver pwm-fan: index 0: pwm=0, rpm=0, rru=40, rrd=40, state:2
22:08:04.889 -> [ 3.943579] pwm_fan_driver pwm-fan: index 1: pwm=80, rpm=1000, rru=2, rrd=2, state:2
22:08:04.889 -> [ 3.943583] pwm_fan_driver pwm-fan: index 2: pwm=120, rpm=2000, rru=1, rrd=1, state:2
22:08:04.889 -> [ 3.943586] pwm_fan_driver pwm-fan: index 3: pwm=160, rpm=3000, rru=1, rrd=1, state:2
22:08:04.889 -> [ 3.943590] pwm_fan_driver pwm-fan: index 4: pwm=255, rpm=4000, rru=1, rrd=1, state:3
22:08:04.889 -> [ 3.943593] pwm_fan_driver pwm-fan: index 5: pwm=255, rpm=5000, rru=1, rrd=1, state:3
22:08:04.889 -> [ 3.943597] pwm_fan_driver pwm-fan: index 6: pwm=255, rpm=6000, rru=1, rrd=1, state:3
22:08:04.889 -> [ 3.943600] pwm_fan_driver pwm-fan: index 7: pwm=255, rpm=7000, rru=1, rrd=1, state:4
22:08:04.889 -> [ 3.943604] pwm_fan_driver pwm-fan: index 8: pwm=255, rpm=10000, rru=1, rrd=1, state:4
22:08:04.889 -> [ 3.943607] pwm_fan_driver pwm-fan: index 9: pwm=255, rpm=11000, rru=1, rrd=1, state:4
22:08:04.889 -> [ 3.944245] tegra-wdt 60005100.watchdog: Tegra WDT enabled on probe. Timeout = 120 seconds.
22:08:04.889 -> [ 3.944603] tegra-wdt 60005100.watchdog: initialized (timeout = 120 sec, nowayout = 1)
22:08:04.889 -> [ 3.945498] device-mapper: uevent: version 1.0.3
22:08:04.889 -> [ 3.945987] device-mapper: ioctl: 4.35.0-ioctl (2016-06-23) initialised: dm-devel@redhat.com
22:08:04.889 -> [ 3.951294] tegra210-cpufreq cpufreq: probe()...completed
22:08:04.889 -> [ 3.952035] sdhci: Secure Digital Host Controller Interface driver
22:08:04.889 -> [ 3.952036] sdhci: Copyright(c) Pierre Ossman
22:08:04.889 -> [ 3.952037] sdhci-pltfm: SDHCI platform and OF driver helper
22:08:04.889 -> [ 3.952537] sdhci-tegra sdhci-tegra.0: Got CD GPIO
22:08:04.889 -> [ 3.952893] sdhci-tegra sdhci-tegra.0: Client registration for eMC Successful
22:08:04.889 -> [ 3.953016] sdhci-tegra sdhci-tegra.0: wakeup init done, cdirq 300
22:08:04.889 -> [ 3.956777] tegra-se 70012000.se: tegra_se_probe: complete
22:08:04.889 -> [ 3.957318] hidraw: raw HID events driver (C) Jiri Kosina
22:08:04.889 -> [ 3.959384] usbcore: registered new interface driver usbhid
22:08:04.889 -> [ 3.959385] usbhid: USB HID core driver
22:08:04.889 -> [ 3.977290] tegra21x_actmon 6000c800.actmon: in actmon_register()...
22:08:04.889 -> [ 3.977459] tegra21x_actmon 6000c800.actmon: initialization Completed for the device mc_all
22:08:04.889 -> [ 3.979337] nvpmodel: initialized successfully
22:08:04.889 -> [ 3.980420] usbcore: registered new interface driver snd-usb-audio
22:08:04.889 -> [ 3.980478] No Device Node present for smmu client: snd-soc-dummy !!
22:08:04.889 -> [ 3.980482] platform snd-soc-dummy: No iommus property found in DT node, got swgids from fixup(101004000)
22:08:04.889 -> [ 3.980498] iommu: Adding device snd-soc-dummy to group 36
22:08:04.889 -> [ 3.999008] mmc0: SDHCI controller on sdhci-tegra.0 [sdhci-tegra.0] using ADMA 64-bit with 64 bit addr
22:08:04.889 -> [ 4.011534] OPE platform probe
22:08:04.889 -> [ 4.011621] OPE platform probe successful
22:08:04.889 -> [ 4.012001] OPE platform probe
22:08:04.889 -> [ 4.012086] OPE platform probe successful
22:08:04.889 -> [ 4.037097] tegra-asoc: sound: ADMAIF1 <-> ADMAIF1 mapping ok
22:08:04.889 -> [ 4.037227] tegra-asoc: sound: ADMAIF2 <-> ADMAIF2 mapping ok
22:08:04.889 -> [ 4.037351] tegra-asoc: sound: ADMAIF3 <-> ADMAIF3 mapping ok
22:08:04.889 -> [ 4.037472] tegra-asoc: sound: ADMAIF4 <-> ADMAIF4 mapping ok
22:08:04.889 -> [ 4.037599] tegra-asoc: sound: ADMAIF5 <-> ADMAIF5 mapping ok
22:08:04.889 -> [ 4.037719] tegra-asoc: sound: ADMAIF6 <-> ADMAIF6 mapping ok
22:08:05.241 -> [ 4.037842] tegra-asoc: sound: ADMAIF7 <-> ADMAIF7 mapping ok
22:08:05.241 -> [ 4.037964] tegra-asoc: sound: ADMAIF8 <-> ADMAIF8 mapping ok
22:08:05.241 -> [ 4.038087] tegra-asoc: sound: ADMAIF9 <-> ADMAIF9 mapping ok
22:08:05.241 -> [ 4.038209] tegra-asoc: sound: ADMAIF10 <-> ADMAIF10 mapping ok
22:08:05.241 -> [ 4.050995] u32 classifier
22:08:05.241 -> [ 4.050996] Actions configured
22:08:05.241 -> [ 4.051067] Initializing XFRM netlink socket
22:08:05.241 -> [ 4.051904] NET: Registered protocol family 10
22:08:05.241 -> [ 4.052649] NET: Registered protocol family 17
22:08:05.241 -> [ 4.052659] NET: Registered protocol family 15
22:08:05.241 -> [ 4.052734] bridge: filtering via arp/ip/ip6tables is no longer available by default. Update your scripts to load br_netfilter if you need this.
22:08:05.241 -> [ 4.052791] Bluetooth: RFCOMM socket layer initialized
22:08:05.241 -> [ 4.052799] Bluetooth: RFCOMM ver 1.11
22:08:05.241 -> [ 4.052803] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
22:08:05.241 -> [ 4.052810] Bluetooth: HIDP socket layer initialized
22:08:05.241 -> [ 4.052828] 9pnet: Installing 9P2000 support
22:08:05.241 -> [ 4.052867] Key type dns_resolver registered
22:08:05.241 -> [ 4.054255] Registered cp15_barrier emulation handler
22:08:05.241 -> [ 4.054265] Registered setend emulation handler
22:08:05.241 -> [ 4.055348] registered taskstats version 1
22:08:05.241 -> [ 4.055935] Adding domain ve2-pd to PM domain host1x-pd
22:08:05.241 -> [ 4.056174] Adding domain ve-pd to PM domain host1x-pd
22:08:05.241 -> [ 4.130419] input: tegra-hda HDMI/DP,pcm=3 as /devices/70030000.hda/sound/card0/input0
22:08:05.241 -> [ 4.852357] hpd: state 7 (Takeover from bootloader), hpd 0, pending_hpd_evt 1
22:08:05.241 -> [ 4.854618] isp 54600000.isp: initialized
22:08:05.241 -> [ 4.855582] isp 54680000.isp: initialized
22:08:05.241 -> [ 4.867578] hpd: switching from state 7 (Takeover from bootloader) to state 0 (Reset)
22:08:05.241 -> [ 4.868441] clk_cbus_recalc_rate: no gbus parent
22:08:05.241 -> [ 4.868445] clk_cbus_round_rate: no gbus parent
22:08:05.241 -> [ 4.868447] clk_cbus_round_rate: no gbus parent
22:08:05.241 -> [ 4.868453] clk_cbus_recalc_rate: no gbus parent
22:08:05.241 -> [ 4.868555] clk_cbus_recalc_rate: no gbus parent
22:08:05.241 -> [ 4.868557] clk_cbus_round_rate: no gbus parent
22:08:05.241 -> [ 4.868559] clk_cbus_round_rate: no gbus parent
22:08:05.241 -> [ 4.868561] clk_cbus_recalc_rate: no gbus parent
22:08:05.284 -> [ 4.869233] tegra_dvfs: GPU-cap: registered
22:08:05.284 -> [ 4.869286] tegra dvfs: vdd-cpu: nominal 1168mV, offset 708000uV, step 19200uV, scaling enabled
22:08:05.284 -> [ 4.869288] tegra dvfs: vdd-core: nominal 1125mV, offset 600000uV, step 12500uV, scaling enabled
22:08:05.284 -> [ 4.869290] tegra dvfs: vdd-gpu: nominal 1078mV, offset 708000uV, step 10000uV, scaling enabled
22:08:05.284 -> [ 4.925232] tegra_dvfs: vdd-gpu-vts: registered
22:08:05.284 -> [ 4.947091] hpd: state 0 (Reset), hpd 0, pending_hpd_evt 0
22:08:05.284 -> [ 4.952602] tegradc tegradc.1: blank - powerdown
22:08:05.284 -> [ 4.957248] extcon-disp-state extcon:disp-state: cable 44 state 0 already set.
22:08:05.284 -> [ 4.957302] tegra_core_action core_dvfs_cdev_floor: Tegra CORE DVFS 'floor cooling device' registered
22:08:05.284 -> [ 4.957939] tegra_core_action core_dvfs_cdev_cap: Tegra CORE DVFS 'cap cooling device' registered
22:08:05.284 -> [ 4.958425] input: gpio-keys as /devices/gpio-keys/input/input1
22:08:05.284 -> [ 4.988517] Extcon DP: HPD disabled
22:08:05.284 -> [ 4.992017] hpd: hpd_switch 0
22:08:05.284 -> [ 4.994996] hpd: switching from state 0 (Reset) to state 1 (Check Plug)
22:08:05.284 -> [ 5.001635] hpd: state 1 (Check Plug), hpd 0, pending_hpd_evt 0
22:08:05.284 -> [ 5.007574] hpd: switching from state 1 (Check Plug) to state 3 (Disabled)
22:08:05.284 -> [ 5.014445] tegra_rtc 7000e000.rtc: setting system clock to 2000-01-01 01:00:26 UTC (946688426)
22:08:05.284 -> [ 5.015365] vi 54080000.vi: vi_probe: ++
22:08:05.284 -> [ 5.031582] vi 54080000.vi: initialized
22:08:05.284 -> [ 5.038011] vi 54080000.vi: subdev nvcsi--1 bound
22:08:05.284 -> [ 5.044165] Disable partitions left on by BL
22:08:05.284 -> [ 5.048462] disb
22:08:05.284 -> [ 5.050522] bwmgr: missing cdev-type property
22:08:05.284 -> [ 5.054993] tegra_soctherm 700e2000.soctherm: soctherm: trip temperature -2147483647 forced to -127000
22:08:05.284 -> [ 5.064307] DRAM derating cdev registered.
22:08:05.284 -> [ 5.069416] vdd-1v8: disabling
22:08:05.284 -> [ 5.072494] vdd-fan: disabling
22:08:05.284 -> [ 5.075558] vdd-usb-vbus: disabling
22:08:05.284 -> [ 5.079065] vdd-usb-vbus2: disabling
22:08:05.284 -> [ 5.082650] avdd-io-edp-1v05: disabling
22:08:05.284 -> [ 5.086495] vdd-usb-hub-en: disabling
22:08:05.327 -> [ 5.090412] ALSA device list:
22:08:05.327 -> [ 5.093396] #0: tegra-hda at 0x70038000 irq 83
22:08:05.327 -> [ 5.094437] mmc0: hw tuning done ...
22:08:05.327 -> [ 5.094469] mmc0: new ultra high speed SDR104 SDXC card at address aaaa
22:08:05.327 -> [ 5.098980] mmcblk0: mmc0:aaaa SC128 119 GiB
22:08:05.327 -> [ 5.105030] GPT:Primary header thinks Alt. header is not at the end of the disk.
22:08:05.327 -> [ 5.105033] GPT:25165823 != 249737215
22:08:05.327 -> [ 5.105034] GPT:Alternate GPT header not at the end of the disk.
22:08:05.327 -> [ 5.105035] GPT:25165823 != 249737215
22:08:05.327 -> [ 5.105036] GPT: Use GNU Parted to correct GPT errors.
22:08:05.327 -> [ 5.105056] mmcblk0: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12
22:08:05.327 -> [ 5.144081] #1: tegra-snd-t210ref-mobile-rt565x
22:08:06.132 -> [ 5.949188] EXT4-fs (mmcblk0p1): 3 orphan inodes deleted
22:08:06.132 -> [ 5.954517] EXT4-fs (mmcblk0p1): recovery complete
22:08:06.203 -> [ 5.973349] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Opts: (null)
22:08:06.203 -> [ 5.981465] VFS: Mounted root (ext4 filesystem) on device 179:1.
22:08:06.203 -> [ 5.993871] devtmpfs: mounted
22:08:06.203 -> [ 5.999911] Freeing unused kernel memory: 8512K
22:08:06.348 -> [ 6.163498] systemd[1]: System time before build time, advancing clock.
22:08:06.385 -> [ 6.197244] ip_tables: (C) 2000-2006 Netfilter Core Team
22:08:06.385 -> [ 6.213517] cgroup: cgroup2: unknown option "nsdelegate"
22:08:06.385 -> [ 6.231356] systemd[1]: systemd 237 running in system mode. (+PAM +AUDIT +SELINUX +IMA +APPARMOR +SMACK +SYSVINIT +UTMP +LIBCRYPTSETUP +GCRYPT +GNUTLS +ACL +XZ +LZ4 +SECCOMP +BLKID +ELFUTILS +KMOD -IDN2 +IDN -PCRE2 default-hierarchy=hybrid)
22:08:06.452 -> [ 6.253458] systemd[1]: Detected architecture arm64.
22:08:06.452 -> [ 6.284683] systemd[1]: Set hostname to <tegra-ubuntu>.
22:08:06.594 -> [ 6.372840] systemd[1]: File /lib/systemd/system/systemd-journald.service:36 configures an IP firewall (IPAddressDeny=any), but the local system does not support BPF/cgroup based firewalling.
22:08:06.594 -> [ 6.389901] systemd[1]: Proceeding WITHOUT firewalling in effect! (This warning is only shown for the first loaded unit using IP firewalling.)
22:08:06.694 -> [ 6.522292] random: systemd: uninitialized urandom read (16 bytes read)
22:08:06.761 -> [ 6.530807] systemd[1]: Set up automount Arbitrary Executable File Formats File System Automount Point.
22:08:06.761 -> [ 6.540456] random: systemd: uninitialized urandom read (16 bytes read)
22:08:06.761 -> [ 6.549037] systemd[1]: Created slice System Slice.
22:08:06.761 -> [ 6.554095] random: systemd: uninitialized urandom read (16 bytes read)
22:08:06.761 -> [ 6.560957] systemd[1]: Listening on Journal Socket.
22:08:06.761 -> [ 6.568351] systemd[1]: Mounting POSIX Message Queue File System...
22:08:06.761 -> [ 6.577322] systemd[1]: Mounting Huge Pages File System...
22:08:06.861 -> [ 6.663422] EXT4-fs (mmcblk0p1): re-mounted. Opts: (null)
22:08:06.933 -> [ 6.739205] nvgpu: 57000000.gpu gm20b_init_clk_setup_sw:1268 [INFO] GPCPLL initial settings: NA mode, M=1, N=34, P=3 (id = 1)
22:08:07.889 -> [ 7.706987] random: crng init done
22:08:07.889 -> [ 7.710393] random: 7 urandom warning(s) missed due to ratelimiting
22:08:48.189 -> [ 48.000890] edid invalid
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment