Skip to content

Instantly share code, notes, and snippets.

Show Gist options
  • Star 19 You must be signed in to star a gist
  • Fork 1 You must be signed in to fork a gist
  • Save jtrv/47542c8be6345951802eebcf9dc7da31 to your computer and use it in GitHub Desktop.
Save jtrv/47542c8be6345951802eebcf9dc7da31 to your computer and use it in GitHub Desktop.

EasyEffects Microphone Preset: Noise Reduction + NPR Masculin Voice

This is a custom input chain for easyeffects for noise reduction and a semi NPR-ish sound optimized for masculine voices with my mic, placement, acoustics, etc. I started with @MateusRodCosta input chain (now deprecated) based on this article from fedora magazine. Soon after I prompted an LLM to produce settings for NPR-like sound. I was skeptic this might create bogus settings, but to my surprise it worked quite well in my subjective testing, so I applied them here. I also added the speech processor effect, and changed the order of the chain based on my subjective testing.

If this config breaks, check my current config file and comment if I need to update the gist.

If you know of ways to improve this configuration, please feel free to comment and make a suggestion.

{
"input": {
"blocklist": [],
"compressor#0": {
"attack": 5.0,
"boost-amount": 6.0,
"boost-threshold": -72.0,
"bypass": false,
"dry": -100.0,
"hpf-frequency": 10.0,
"hpf-mode": "off",
"input-gain": 0.0,
"knee": -6.0,
"lpf-frequency": 20000.0,
"lpf-mode": "off",
"makeup": 0.0,
"mode": "Downward",
"output-gain": 0.0,
"ratio": 4.0,
"release": 75.0,
"release-threshold": -40.0,
"sidechain": {
"lookahead": 0.0,
"mode": "RMS",
"preamp": 0.0,
"reactivity": 10.0,
"source": "Middle",
"stereo-split-source": "Left/Right",
"type": "Feed-forward"
},
"stereo-split": false,
"threshold": -20.0,
"wet": 0.0
},
"deesser#0": {
"bypass": false,
"detection": "RMS",
"f1-freq": 3000.0,
"f1-level": -6.0,
"f2-freq": 5000.0,
"f2-level": -6.0,
"f2-q": 1.5000000000000004,
"input-gain": 0.0,
"laxity": 15,
"makeup": 0.0,
"mode": "Wide",
"output-gain": 0.0,
"ratio": 5.0,
"sc-listen": false,
"threshold": -20.0
},
"equalizer#0": {
"balance": 0.0,
"bypass": false,
"input-gain": 0.0,
"left": {
"band0": {
"frequency": 50.0,
"gain": 3.0,
"mode": "RLC (BT)",
"mute": false,
"q": 0.7,
"slope": "x1",
"solo": false,
"type": "Hi-pass",
"width": 4.0
},
"band1": {
"frequency": 90.0,
"gain": 3.0,
"mode": "RLC (MT)",
"mute": false,
"q": 0.7,
"slope": "x1",
"solo": false,
"type": "Lo-shelf",
"width": 4.0
},
"band2": {
"frequency": 425.0,
"gain": -2.0,
"mode": "BWC (MT)",
"mute": false,
"q": 0.9999999999999998,
"slope": "x2",
"solo": false,
"type": "Bell",
"width": 4.0
},
"band3": {
"frequency": 3500.0,
"gain": 3.0,
"mode": "BWC (BT)",
"mute": false,
"q": 0.7,
"slope": "x2",
"solo": false,
"type": "Bell",
"width": 4.0
},
"band4": {
"frequency": 9000.0,
"gain": 2.0,
"mode": "LRX (MT)",
"mute": false,
"q": 0.7,
"slope": "x1",
"solo": false,
"type": "Hi-shelf",
"width": 4.0
}
},
"mode": "IIR",
"num-bands": 5,
"output-gain": 0.0,
"pitch-left": 0.0,
"pitch-right": 0.0,
"right": {
"band0": {
"frequency": 50.0,
"gain": 3.0,
"mode": "RLC (BT)",
"mute": false,
"q": 0.7,
"slope": "x1",
"solo": false,
"type": "Hi-pass",
"width": 4.0
},
"band1": {
"frequency": 90.0,
"gain": 3.0,
"mode": "RLC (MT)",
"mute": false,
"q": 0.7,
"slope": "x1",
"solo": false,
"type": "Lo-shelf",
"width": 4.0
},
"band2": {
"frequency": 425.0,
"gain": -2.0,
"mode": "BWC (MT)",
"mute": false,
"q": 0.9999999999999998,
"slope": "x2",
"solo": false,
"type": "Bell",
"width": 4.0
},
"band3": {
"frequency": 3500.0,
"gain": 3.0,
"mode": "BWC (BT)",
"mute": false,
"q": 0.7,
"slope": "x2",
"solo": false,
"type": "Bell",
"width": 4.0
},
"band4": {
"frequency": 9000.0,
"gain": 2.0,
"mode": "LRX (MT)",
"mute": false,
"q": 0.7,
"slope": "x1",
"solo": false,
"type": "Hi-shelf",
"width": 4.0
}
},
"split-channels": false
},
"gate#0": {
"attack": 1.0,
"bypass": false,
"curve-threshold": -50.0,
"curve-zone": -2.0,
"dry": -100.0,
"hpf-frequency": 10.0,
"hpf-mode": "off",
"hysteresis": true,
"hysteresis-threshold": -3.0,
"hysteresis-zone": -1.0,
"input-gain": 0.0,
"lpf-frequency": 20000.0,
"lpf-mode": "off",
"makeup": 1.0,
"output-gain": 0.0,
"reduction": -15.0,
"release": 200.0,
"sidechain": {
"input": "Internal",
"lookahead": 0.0,
"mode": "RMS",
"preamp": 0.0,
"reactivity": 10.0,
"source": "Middle",
"stereo-split-source": "Left/Right"
},
"stereo-split": false,
"wet": -1.0
},
"limiter#0": {
"alr": false,
"alr-attack": 5.0,
"alr-knee": 0.0,
"alr-release": 50.0,
"attack": 1.0,
"bypass": false,
"dithering": "16bit",
"external-sidechain": false,
"gain-boost": true,
"input-gain": 0.0,
"lookahead": 5.0,
"mode": "Herm Wide",
"output-gain": 0.0,
"oversampling": "Half x2(2L)",
"release": 5.0,
"sidechain-preamp": 0.0,
"stereo-link": 100.0,
"threshold": -1.0
},
"plugins_order": [
"rnnoise#0",
"gate#0",
"deesser#0",
"compressor#0",
"equalizer#0",
"speex#0",
"limiter#0"
],
"rnnoise#0": {
"bypass": false,
"enable-vad": false,
"input-gain": 0.0,
"model-path": "",
"output-gain": 0.0,
"release": 20.0,
"vad-thres": 50.0,
"wet": 0.0
},
"speex#0": {
"bypass": false,
"enable-agc": false,
"enable-denoise": false,
"enable-dereverb": false,
"input-gain": 0.0,
"noise-suppression": -70,
"output-gain": 0.0,
"vad": {
"enable": true,
"probability-continue": 90,
"probability-start": 95
}
}
}
}
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment