logs laboratorio 1

router1

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.08.23 08:37:44 =~=~=~=~=~=~=~=~=~=~=~=

Router1>enma  able
Router1#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router1(config)#interface G0/0
Router1(config-if)#no shutdown
Router1(config-if)#exit
Router1(config)#interface G0/1.5
Router1(config-subif)#encapsulation dot1q 5
Router1(config-subif)#ip address 192.10.20.1 255.255.255.0
Router1(config-subif)#exit
Router1(config)#interface G0/1.10
Router1(config-subif)#encapsulation dot1q 10
Router1(config-subif)#ip address 192.10.30.1 255.255.255.0
Router1(config-subif)#exit
Router1(config)#tftp-server flash0:apps41.9-3-1ES26.sbn
Router1(config)#tftp-server flash0:cnu41.9-3-1ES26.sbn
Router1(config)#tftp-server flash0:cvm41sccp.9-3-1ES26.sbn
Router1(config)#tftp-server flash0:dsp41.9-3-1ES26.sbn
Router1(config)#tftp-server flash0:jar41sccp.9-3-1ES26.sbn
Router1(config)#tftp-server flash0:SCCP41.9-3-1SR4-1S.loads
Router1(config)#tftp-server flash0:term41.default.loads
Router1(config)#tftp-server flash0:term61.default.loads
Router1(config)#no    ntp master
Router1(config)#telephony-service
Router1(config-telephony)#create cnf-files version-stamp Aug 09 2016 00:00:00
Creating CNF files
Router1(config-telephony)#no create cnf-files
CNF files deleted

Router1(config-telephony)#load 7941 SCCP41.9-3-1SR4-1S
Router1(config-telephony)#create cnf-files }
                                           ^
% Invalid input detected at '^' marker.

Router1(config-telephony)#create cnf-files
Creating CNF files

Router1(config-telephony)#max-ephones 3
Router1(config-telephony)#max-dn 3
Router1(config-telephony)#ip source-address 192.10.20.1 port 2000
Updating CNF files
CNF files updating complete

Router1(config-telephony)#auto assign 1 to 3
Router1(config-telephony)#system message VoIP_LabIntercom
Router1(config-telephony)#ephone-dn 1
Router1(config-ephone-dn)#number 101
Router1(config-ephone-dn)#name IP_Phone1
Router1(config-ephone-dn)#label IP_Phone1
Router1(config-ephone-dn)#exit
Router1(config)#s telep     ephone-dn 2
Router1(config-ephone-dn)#number 102
Router1(config-ephone-dn)#name IP_Phone2
Router1(config-ephone-dn)#label IP_Phone2
Router1(config-ephone-dn)#exit
Router1(config)#
Aug 23 13:42:52.375: %LINK-3-UPDOWN: Interface ephone_dsp DN 2.1, changed state to up
Router1(config)#ephone 1
Router1(config-ephone)#no multicast-moh
Router1(config-ephone)#mac-address 001C.58A3.2054
Router1(config-ephone)#type 7941
Router1(config-ephone)#button 1:1
Router1(config-ephone)#exit
Router1(config)#ip dhcp excluded-address 192.10.20.1
Router1(config)#ip dhcp excluded-address 192.10.30.1
Router1(config)#ip dhcp pool poolVoz
Router1(dhcp-config)#network 192.10.20.0 255.255.255.0
Router1(dhcp-config)#domain-name VoIP_LabIntercom
Router1(dhcp-config)#option 150 ip 192.10.20.1
Router1(dhcp-config)#default-router 192.10.20.1
Router1(dhcp-config)#exit
Router1(config)#
Router1(config)#ip dhcp pool poolDatos
Router1(dhcp-config)#network 192.10.30.0 255.255.255.0
Router1(dhcp-config)#default-router 192.10.30.1
Router1(dhcp-config)#domain-name datosLabIntercom
Router1(dhcp-config)#dial-peer voice 10 pots
Router1(config-dial-peer)#destination-pattern 100
Router1(config-dial-peer)#port 0/0/1
Router1(config-dial-peer)#exit
Router1(config)#dial-peer voice 20 voip
Router1(config-dial-peer)#destination-pattern 20.
Router1(config-dial-peer)#session target ipv4:192.30.30.2
Router1(config-dial-peer)#exti
                            ^
% Invalid input detected at '^' marker.

Router1(config-dial-peer)#exit
Router1(config)#interface G0/0
Router1(config-if)#ip address 192.30.30.1 255.255.255.0
Router1(config-if)#no shutdown
Router1(config-if)#router rip
Router1(config-router)#version v2
                               ^
% Invalid input detected at '^' marker.

Router1(config-router)#no auto-summary
Router1(config-router)#network 192.30.30.0
Router1(config-router)#network 192.10.20.0
Router1(config-router)#network 192.10.30.0
Router1(config-router)#exit
Router1(config)#router rip
Router1(config-router)#version 2
Router1(config-router)#no auto-summary
Router1(config-router)#network 192.30.30.0
Router1(config-router)#network 192.10.20.0
Router1(config-router)#network 192.10.30.0
Router1(config-router)#exit
Router1(config)#exit
Router1#
Aug 23 13:45:38.615: %SYS-5-CONFIG_I: Configured from console by console

router1 arreglo

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.08.23 09:19:16 =~=~=~=~=~=~=~=~=~=~=~=

Router1>enable
Router1#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router1(config)#dial    no dial-peer voice 10 voip
Router1(config)#dial-peer voice 11 voip
Router1(config-dial-peer)#destination-pattern 10
Router1(config-dial-peer)#session t  -target ipv4:192.10.20.1
                                 ^
% Invalid input detected at '^' marker.

Router1(config-dial-peer)#session-target ipv4:192.10.20.1target ipv4:192.10.20.1  target ipv4:192.10.20.1
Router1(config-dial-peer)#exit
Router1(config)#dial-peer voice 22 voip
Router1(config-dial-peer)#destination C!  pattern        -pattern 20.
Router1(config-dial-peer)#session target ipv4:192.30.30.1
Router1(config-dial-peer)#exit
Router1(config)#dial-peer voice 11 voip
Router1(config-dial-peer)#desial-peer voice 11 voip                      est
Router1(config-dial-peer)#destination-p
Router1(config-dial-peer)#destination-pattern 10.
Router1(config-dial-peer)#exit
Router1(config)#

Router1 running config no softphone.log

Router1(config)#show running-config
                  ^
% Invalid input detected at '^' marker.

Router1(config)#do show running-config
Building configuration...


Current configuration : 3971 bytes
!
! Last configuration change at 13:45:38 UTC Tue Aug 23 2016
! NVRAM config last updated at 14:05:17 UTC Tue Aug 23 2016
! NVRAM config last updated at 14:05:17 UTC Tue Aug 23 2016
version 15.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router1
!
boot-start-marker
boot-end-marker
!
aqm-register-fnf
!
!
no aaa new-model
memory-size iomem 20
!
!
!
!
ip dhcp excluded-address 192.14.20.1
ip dhcp excluded-address 192.14.30.1
ip dhcp excluded-address 192.10.20.1
ip dhcp excluded-address 192.10.30.1
!
ip dhcp pool VLAN_Voz
 network 192.14.20.0 255.255.255.0
 domain-name VoIP_LabIntercon
 option 150 ip 192.14.20.1
 default-router 192.14.20.1
!
ip dhcp pool VLAN_Datos
 network 192.14.30.0 255.255.255.0
 default-router 192.14.30.1
 domain-name datosLabIntercon
!
ip dhcp pool poolVoz
 network 192.10.20.0 255.255.255.0
 domain-name VoIP_LabIntercom
 option 150 ip 192.10.20.1
 default-router 192.10.20.1
!
ip dhcp pool poolDatos
 network 192.10.30.0 255.255.255.0
 default-router 192.10.30.1
 domain-name datosLabIntercom
!
!
!
ip cef
no ipv6 cef
multilink bundle-name authenticated
!
!
!
!
!
!
!
voice-card 0
!
!
!
!
!
!
!
!
license udi pid CISCO2911/K9 sn FTX1846AHDQ
hw-module pvdm 0/0
!
!
!
!
redundancy
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
 no ip address
 shutdown
!
interface GigabitEthernet0/0
 ip address 192.30.30.1 255.255.255.0
 duplex auto
 speed auto
!
interface GigabitEthernet0/1
 no ip address
 duplex auto
 speed auto
!
interface GigabitEthernet0/1.5
 encapsulation dot1Q 5
 ip address 192.10.20.1 255.255.255.0
!
interface GigabitEthernet0/1.10
 encapsulation dot1Q 10
 ip address 192.10.30.1 255.255.255.0
!
interface GigabitEthernet0/1.45
 encapsulation dot1Q 45
 ip address 192.14.20.1 255.255.255.0
!
interface GigabitEthernet0/1.50
 encapsulation dot1Q 50
 ip address 192.14.30.1 255.255.255.0
!
interface GigabitEthernet0/2
 no ip address
 shutdown
 duplex auto
 speed auto
!
router rip
 version 2
 network 192.10.20.0
 network 192.10.30.0
 network 192.14.20.0
 network 192.14.30.0
 network 192.14.60.0
 network 192.30.30.0
 no auto-summary
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
tftp-server flash0:apps41.9-3-1ES26.sbn
tftp-server flash0:cnu41.9-3-1ES26.sbn
tftp-server flash0:cvm41sccp.9-3-1ES26.sbn
tftp-server flash0:dsp41.9-3-1ES26.sbn
tftp-server flash0:jar41sccp.9-3-1ES26.sbn
tftp-server flash0:SCCP41.9-3-1SR4-1S.loads
tftp-server flash0:term41.default.loads
tftp-server flash0:term61.default.loads
!
control-plane
!
!
voice-port 0/0/0
!
voice-port 0/0/1
 !
 !
 !
 !
!
!
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
!
mgcp profile default
!
!
dial-peer voice 11 voip
 destination-pattern 10.
 session target ipv4:192.10.20.1
!
dial-peer voice 22 voip
 destination-pattern 20.
 session target ipv4:192.30.30.1
!
dial-peer voice 20 voip
 destination-pattern 20.
 session target ipv4:192.30.30.2
!
dial-peer voice 10 pots
 destination-pattern 100
 port 0/0/1
!
!
!
!
gatekeeper
 shutdown
!
!
telephony-service
 max-ephones 3
 max-dn 3
 ip source-address 192.10.20.1 port 2000
 auto assign 1 to 3
 system message VoIP_LabIntercom
 load 7941 SCCP41.9-3-1SR4-1S
 max-conferences 8 gain -6
 transfer-system full-consult
 create cnf-files version-stamp 7960 Aug 23 2016 13:42:07
!
!
ephone-dn  1
 number 101
 label IP_Phone1
 name IP_Phone1
!
!
ephone-dn  2
 number 102
 label IP_Phone2
 name IP_Phone2
!
!
ephone  1
 no multicast-moh
 mac-address 001C.58A3.2054
 type 7941
 button  1:1
!
!
!
ephone  2
 mac-address 001C.58A3.1FFF
 type 7941
!
!
!
!
line con 0
line aux 0
line 2
 no activation-character
 no exec
 transport preferred none
 transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
 stopbits 1
line vty 0 4
 login
 transport input all
!
scheduler allocate 20000 1000
ntp master
!
end

Router1(config)#$

router2

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.08.23 08:56:34 =~=~=~=~=~=~=~=~=~=~=~=

Router2>enable
Router2#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router2(config)#interface G0/0
Router2(config-if)#no shutdown
Router2(config-if)#interface G0/1.5
Router2(config-subif)#encapsulation dot1q 5
Router2(config-subif)#ip address 192.10.40.1 255.255.255.0
Router2(config-subif)#exit
Router2(config)#interface G0/1.10
Router2(config-subif)#encapsulation dot1q 10
Router2(config-subif)#ip address 192.10.50.1 255.255.255.0
Router2(config-subif)#exit
Router2(config)#tftp-server flash0:apps41.9-3-1ES26.sbn
Router2(config)#tftp-server flash0:cnu41.9-3-1ES26.sbn
Router2(config)#tftp-server flash0:cvm41sccp.9-3-1ES26.sbn
Router2(config)#tftp-server flash0:dsp41.9-3-1ES26.sbn
Router2(config)#tftp-server flash0:jar41sccp.9-3-1ES26.sbn
Router2(config)#tftp-server flash0:SCCP41.9-3-1SR4-1S.loads
Router2(config)#tftp-server flash0:term41.default.loads
Router2(config)#tftp-server flash0:term61.default.loads
Router2(config)#ntp master
Router2(config)#telephony-service
Router2(config-telephony)#create cnf-files version-stamp Aug 09 2016 00:00:00
Creating CNF files
Router2(config-telephony)#no create cnf-files
CNF files deleted

Router2(config-telephony)#load 7941 SCCP41.9-3-1SR4-1S
Router2(config-telephony)#create cnf-files 
Creating CNF files

Router2(config-telephony)#exit
Router2(config)#max-ephones 3
                  ^
% Invalid input detected at '^' marker.

Router2(config)#max-dn 3
                  ^
% Invalid input detected at '^' marker.

Router2(config)#ip source-address 192.10.40.1 port 2000
                          ^
% Invalid input detected at '^' marker.

Router2(config)#auto assign 1 to 3
                    ^
% Invalid input detected at '^' marker.

Router2(config)#system message VoIP_LabIntercom                               telephony-service
Router2(config-telephony)#max-ephones 3
Router2(config-telephony)#max-dn 3
Router2(config-telephony)#ip source-address 192.10.40.1 port 2000
Updating CNF files
CNF files updating complete

Router2(config-telephony)#auto assign 1 to 3
Router2(config-telephony)#system message VoIP_LabIntercom
Router2(config-telephony)#ephone-dn 1
Router2(config-ephone-dn)#number 201
Router2(config-ephone-dn)#name IP_Phone1.1
Router2(config-ephone-dn)#label IP_Phone1
Router2(config-ephone-dn)#exit
Router2(config)#
Router2(config)#ephone-dn 2
Router2(config-ephone-dn)#number 202
Router2(config-ephone-dn)#name IP_Phone2.1
Router2(config-ephone-dn)#label IP_Phone2.1
Router2(config-ephone-dn)#exit
Router2(config)#
Aug 23 13:57:28.387: %LINK-3-UPDOWN: Interface ephone_dsp DN 2.1, changed state to up
Router2(config)#
Router2(config)#ephone 1
Router2(config-ephone)#no multicast-moh
Router2(config-ephone)#mac-address 001C.58A3.1FFF
Router2(config-ephone)#type 7941
Router2(config-ephone)#button 1:1
Router2(config-ephone)#exit.3  
Router2(config)#ip dhcp excluded-address 192.10.40.1
Router2(config)#ip dhcp excluded-address 192.10.50.1
Router2(config)#
Router2(config)#ip dhcp pool poolVoz
Router2(dhcp-config)#network 192.10.40.0 255.255.255.0
Router2(dhcp-config)#domain-name VoIP_LabIntercom
Router2(dhcp-config)#option 150 ip 192.10.40.1
Router2(dhcp-config)#default-router 192.10.40.1
Router2(dhcp-config)#exit
Router2(config)#ip dhcp pool poolDatos
Router2(dhcp-config)#network 192.10.50.0 255.255.255.0
Router2(dhcp-config)#default-router 192.10.50.1
Router2(dhcp-config)#domain-name datosLabIntercom
Router2(dhcp-config)#exit
Router2(config)#dial-peer voice 10 voip
                                   ^
% Invalid input detected at '^' marker.

Router2(config)#destination-pattern 10.
                  ^
% Invalid input detected at '^' marker.

Router2(config)#session target ipv4:192.30.30.1                               dial-peer voice 10 voip
                                   ^
% Invalid input detected at '^' marker.

Router2(config)#
Aug 23 13:58:54.615: %IPPHONE-6-REGISTER: ephone-1:SEP001C58A31FFF IP:192.10.40.2 Socket:1 DeviceType:Phone has registered.
Router2(config)#
Router2(config)#dial-peer voice 10 voip
                                   ^
% Invalid input detected at '^' marker.

Router2(config)#interface G0/0
Router2(config-if)#ip address 192.30.30.2 255.255.255.0
Router2(config-if)#no shutdown
Router2(config-if)#
Router2(config-if)#exit
Router2(config)#router rip
Router2(config-router)#version 2
Router2(config-router)#no auto-summary
Router2(config-router)#network 192.30.30.0
Router2(config-router)#network 192.10.40.0
Router2(config-router)#network 192.10.50.0
Router2(config-router)#
Aug 23 14:02:25.891: %IPPHONE-6-UNREGISTER_ABNORMAL: ephone-1:SEP001C58A31FFF IP:192.10.40.2 Socket:1 DeviceType:Phone has unregistered abnormally.
Router2(config-router)#exit
Router2(config)#exitnetwork 192.10.50.040.030.30.0o auto-summary    version 2      router ripexit      no shutdownip address 192.30.30.2 255.255.255.0nterface G0/0                      dial-peer voice 10 voip
                                   ^
% Invalid input detected at '^' marker.

Router2(config)#dial-peer voice 10 voip0 voip 20 voip0 voip
Router2(config-dial-peer)#exit
Router2(config)#exitdial-peer voice 20 voipndial-peer voice 20 voipodial-peer voice 20 voip dial-peer voice 20 voip
Router2(config)#no dial-peer voice 20 voip                          
Aug 23 14:07:10.155: %IPPHONE-6-REGISTER: ephone-1:SEP001C58A31FFF IP:192.10.40.2 Socket:1 DeviceType:Phone has registered.
Router2(config)#dial-peer voice 20 pots
Router2(config-dial-peer)#exit
Router2(config)#dial-peer voice 10 voip
                                   ^
% Invalid input detected at '^' marker.

Router2(config)#destination-pattern 10.
                  ^
% Invalid input detected at '^' marker.

Router2(config)#session target ipv4:192.30.30.1                               dial-peer voice 11 voip
Router2(config-dial-peer)#destination  -pattern 10
Router2(config-dial-peer)#session target ipv4:192.10.20.1
Router2(config-dial-peer)#exit
Router2(config)#deial-     ial-peer voice 12    22 voip  
Router2(config-dial-peer)#destination pattern        -pattern 20
Router2(config-dial-peer)#ser  ession target  :  ipv4:192.30.30.1
Router2(config-dial-peer)#exit
Router2(config)#exit
Router2#
Aug 23 14:18:34.167: %SYS-5-CONFIG_I: Configured from console by console

router2 running config no softphone

Router2>enable
Router2#show running-config
Building configuration...


Current configuration : 3780 bytes
!
! Last configuration change at 14:25:59 UTC Tue Aug 23 2016
! NVRAM config last updated at 13:41:18 UTC Tue Aug 23 2016
! NVRAM config last updated at 13:41:18 UTC Tue Aug 23 2016
version 15.3
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname Router2
!
boot-start-marker
boot-end-marker
!
aqm-register-fnf
!
!
no aaa new-model
memory-size iomem 20
!
!
!
!
ip dhcp excluded-address 192.14.40.1
ip dhcp excluded-address 192.14.50.1
ip dhcp excluded-address 192.10.40.1
ip dhcp excluded-address 192.10.50.1
!
ip dhcp pool VLAN_Voz
 network 192.14.40.0 255.255.255.0
 domain-name VoIP_LabIntercon
 option 150 ip 192.14.40.1
 default-router 192.14.40.1
!
ip dhcp pool VLAN_Datos
 network 192.14.50.0 255.255.255.0
 domain-name datosLabIntercon
 default-router 192.14.50.1
!
ip dhcp pool poolVoz
 network 192.10.40.0 255.255.255.0
 domain-name VoIP_LabIntercom
 option 150 ip 192.10.40.1
 default-router 192.10.40.1
!
ip dhcp pool poolDatos
 network 192.10.50.0 255.255.255.0
 default-router 192.10.50.1
 domain-name datosLabIntercom
!
!
!
ip cef
no ipv6 cef
multilink bundle-name authenticated
!
!
!
!
!
!
!
voice-card 0
!
!
!
!
!
!
!
!
license udi pid CISCO2911/K9 sn FTX1846AHDN
hw-module pvdm 0/0
!
!
!
!
redundancy
!
!
!
!
!
!
interface Embedded-Service-Engine0/0
 no ip address
 shutdown
!
interface GigabitEthernet0/0
 ip address 192.30.30.2 255.255.255.0
 duplex auto
 speed auto
!
interface GigabitEthernet0/1
 no ip address
 duplex auto
 speed auto
!
interface GigabitEthernet0/1.5
 encapsulation dot1Q 5
 ip address 192.10.40.1 255.255.255.0
!
interface GigabitEthernet0/1.10
 encapsulation dot1Q 10
 ip address 192.10.50.1 255.255.255.0
!
interface GigabitEthernet0/1.45
 encapsulation dot1Q 45
 ip address 192.14.40.1 255.255.255.0
!
interface GigabitEthernet0/1.50
 encapsulation dot1Q 50
 ip address 192.14.50.1 255.255.255.0
!
interface GigabitEthernet0/2
 no ip address
 shutdown
 duplex auto
 speed auto
!
router rip
 version 2
 network 192.10.40.0
 network 192.10.50.0
 network 192.14.40.0
 network 192.14.50.0
 network 192.14.60.0
 network 192.30.30.0
 no auto-summary
!
ip forward-protocol nd
!
no ip http server
no ip http secure-server
!
!
!
!
tftp-server flash0:apps41.9-3-1ES26.sbn
tftp-server flash0:cnu41.9-3-1ES26.sbn
tftp-server flash0:cvm41sccp.9-3-1ES26.sbn
tftp-server flash0:dsp41.9-3-1ES26.sbn
tftp-server flash0:jar41sccp.9-3-1ES26.sbn
tftp-server flash0:SCCP41.9-3-1SR4-1S.loads
tftp-server flash0:term41.default.loads
tftp-server flash0:term61.default.loads
!
control-plane
!
!
voice-port 0/0/0
!
voice-port 0/0/1
 !
 !
 !
 !
!
!
mgcp behavior rsip-range tgcp-only
mgcp behavior comedia-role none
mgcp behavior comedia-check-media-src disable
mgcp behavior comedia-sdp-force disable
!
mgcp profile default
!
!
dial-peer voice 10 pots
 destination-pattern 200
 port 0/0/1
!
dial-peer voice 20 pots
!
dial-peer voice 11 voip
 destination-pattern 10.
 session target ipv4:192.30.30.1
!
!
!
!
gatekeeper
 shutdown
!
!
telephony-service
 max-ephones 3
 max-dn 3
 ip source-address 192.10.40.1 port 2000
 auto assign 1 to 3
 system message VoIP_LabIntercom
 load 7941 SCCP41.9-3-1SR4-1S
 max-conferences 8 gain -6
 transfer-system full-consult
 create cnf-files version-stamp 7960 Aug 23 2016 13:57:14
!
!
ephone-dn  1
 number 201
 label IP_Phone1
 name IP_Phone1.1
!
!
ephone-dn  2
 number 202
 label IP_Phone2.1
 name IP_Phone2.1
!
!
ephone  1
 no multicast-moh
 mac-address 001C.58A3.1FFF
 type 7941
 button  1:1
!
!
!
!
line con 0
line aux 0
line 2
 no activation-character
 no exec
 transport preferred none
 transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
 stopbits 1
line vty 0 4
 login
 transport input all
!
scheduler allocate 20000 1000
ntp master
!
end

Router2#$

router2arreglo

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.08.23 09:23:35 =~=~=~=~=~=~=~=~=~=~=~=

Router2#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Router2(config)#no dial-peer voice 22    22
Router2(config)#no dial-peer voice 22 voip
No voice peer with tag = 22

Router2(config)#no dial-peer voice 22 voip       11 voip
Router2(config)#dial-peer voice 11 voip
Router2(config-dial-peer)#destination pa   .t  -pattern 10.
Router2(config-dial-peer)#session target ipv4:192.10.3    30.30.1
Router2(config-dial-peer)#exit
Router2(config)#esx  xit
Router2#
Aug 23 14:25:59.403: %SYS-5-CONFIG_I: Configured from console by console

switch1

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.08.23 08:32:05 =~=~=~=~=~=~=~=~=~=~=~=

Switch1#ena   cong
Translating "cong"...domain server (255.255.255.255)
% Unknown command or computer name, or unable to find computer address
Switch1#conf
Configuring from terminal, memory, or network [terminal]? t
Enter configuration commands, one per line.  End with CNTL/Z.
Switch1(config)#show      do show vlan bried
show vlan bried
              ^
% Invalid input detected at '^' marker.

Switch1(config)#do show vlan bried f

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0/3, Fa0/4, Fa0/5, Fa0/6
                                                Fa0/7, Fa0/8, Fa0/9, Fa0/10
                                                Fa0/11, Fa0/12, Fa0/13, Fa0/14
                                                Fa0/15, Fa0/16, Fa0/17, Fa0/18
                                                Fa0/19, Fa0/20, Fa0/21, Fa0/22
                                                Fa0/23, Fa0/24, Gi0/1, Gi0/2
45   VLAN0045                         active    Fa0/2
50   VLAN0050                         active    Fa0/2
1002 fddi-default                     act/unsup 
1003 token-ring-default               act/unsup 
1004 fddinet-default                  act/unsup 
1005 trnet-default                    act/unsup 
Switch1(config)#no vlan 45
Switch1(config)#no vlan 50
Switch1(config)#vlan 5
Switch1(config-vlan)#name Vlan v      VOI  OICE_VLAN
Switch1(config-vlan)#vlan 10
Switch1(config-vlan)#namve DATA_VLAN
                        ^
% Invalid input detected at '^' marker.

Switch1(config-vlan)#namve DATA_VLANe DATA_VLAN 
Switch1(config-vlan)#exit
Switch1(config)#s interface FastEthernet0/1
Switch1(config-if)#switchport trunk encapsulation dot1q
Switch1(config-if)#switchport mode trunk
Switch1(config-if)#switchport trunk native vlan 99
Switch1(config-if)#switchport trunk allowed vlan 99,5,10
Switch1(config-if)#spanning-tree portfast
Switch1(config-if)#
Switch1(config-if)#interface FastEthernet0/2
Switch1(config-if)#switchport access vlan 10
Switch1(config-if)#switchport voice vlan 5
Switch1(config-if)#spanning-tree portfast
Switch1(config-if)#exit
Switch1(config)#exit
Switch1#exit
*Mar  1 00:59:50.508: %SYS-5-CONFIG_I: Configured from console by console

































Switch1 con0 is now available





Press RETURN to get started.

switch2

=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2016.08.23 08:53:31 =~=~=~=~=~=~=~=~=~=~=~=

Switch2>
Switch2>enable  
Switch2#conf t
Enter configuration commands, one per line.  End with CNTL/Z.
Switch2(config)#s do show vlan brief

VLAN Name                             Status    Ports
---- -------------------------------- --------- -------------------------------
1    default                          active    Fa0/3, Fa0/4, Fa0/5, Fa0/6
                                                Fa0/7, Fa0/8, Fa0/9, Fa0/10
                                                Fa0/11, Fa0/12, Fa0/13, Fa0/14
                                                Fa0/15, Fa0/16, Fa0/17, Fa0/18
                                                Fa0/19, Fa0/20, Fa0/21, Fa0/22
                                                Fa0/23, Fa0/24, Gi0/1, Gi0/2
45   VLAN0045                         active    Fa0/3
50   VLAN0050                         active    Fa0/2
1002 fddi-default                     act/unsup 
1003 token-ring-default               act/unsup 
1004 fddinet-default                  act/unsup 
1005 trnet-default                    act/unsup 
Switch2(config)#no vlan 45
Switch2(config)#no vlan 50
Switch2(config)#vlan 5
Switch2(config-vlan)#exit
Switch2(config)#vlan 10
Switch2(config-vlan)#exit
Switch2(config)#show interface brief
                  ^
% Invalid input detected at '^' marker.

Switch2(config)#interface FastEthernet0/1
Switch2(config-if)#switchport trunk encapsulation dot1q
Switch2(config-if)#switchport mode trunk
Switch2(config-if)#switchport trunk native vlan 99
Switch2(config-if)#switchport trunk allowed vlan 99,5,10
Switch2(config-if)#spanning-tree portfast
Switch2(config-if)#
Switch2(config-if)#
Switch2(config-if)#interface FastEthernet0/2
Switch2(config-if)#switchport mode access
Switch2(config-if)#switchport access vlan 10
Switch2(config-if)#spanning-tree portfast
Switch2(config-if)#no shutdown
Switch2(config-if)#exit
Switch2(config)#interface FastEthernet0/3
Switch2(config-if)#switchport mode access
Switch2(config-if)#switchport  voice vlan 5
Switch2(config-if)#spanning-tree portfast
Switch2(config-if)#no shutdown
Switch2(config-if)#exit
Switch2(config)#ext it
Switch2#
*Mar  1 01:17:48.788: %SYS-5-CONFIG_I: Configured from console by console