EEM apps for Cisco 4500

gistfile1.tcsh

event manager environment MailRecipient user
event manager environment MailDomain domain.com
event manager environment MailServer 1.2.3.4
event manager applet mail_on_module3_down 
 event syslog occurs 1 pattern "LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet3.*to down" period 1
 action 1.0 info type routername
 action 1.1 cli command "show interface desc"
 action 2.0 mail server "$MailServer" to "$MailRecipient" from "$_info_routername@$MailDomain" subject "Interface down module3" body "$_info_routername $_syslog_msg $_cli_result"
 action 3.0 syslog msg "sent"
event manager applet mail_on_module3_up 
 event syslog occurs 1 pattern "LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet3.*to up" period 1
 action 1.0 info type routername
 action 1.1 cli command "show interface desc"
 action 2.0 mail server "$MailServer" to "$MailRecipient" from "$_info_routername@$MailDomain" subject "Interface up module3" body "$_info_routername $_syslog_msg $_cli_result"
 action 3.0 syslog msg "sent"
event manager applet mail_on_module4_down 
 event syslog occurs 1 pattern "LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet4.*to down" period 1
 action 1.0 info type routername
 action 1.1 cli command "show interface desc"
 action 2.0 mail server "$MailServer" to "$MailRecipient" from "$_info_routername@$MailDomain" subject "Interface down module4" body "$_info_routername $_syslog_msg $_cli_result"
 action 3.0 syslog msg "sent"
event manager applet mail_on_module4_up 
 event syslog occurs 1 pattern "LINEPROTO-5-UPDOWN: Line protocol on Interface GigabitEthernet4.*to up" period 1
 action 1.0 info type routername
 action 1.1 cli command "show interface desc"
 action 2.0 mail server "$MailServer" to "$MailRecipient" from "$_info_routername@$MailDomain" subject "Interface up module4" body "$_info_routername $_syslog_msg $_cli_result"
 action 3.0 syslog msg "sent"
event manager applet mail_on_powersupply 
 event syslog occurs 1 pattern "POWERSUPPLY" period 1
 action 1.0 info type routername
 action 1.1 cli command "show power"
 action 2.0 mail server "$MailServer" to "$MailRecipient" from "$_info_routername@$MailDomain" subject "Power Supply State Change" body "$_info_routername $_syslog_msg $_cli_result"
 action 3.0 syslog msg "sent"