Skip to content

Instantly share code, notes, and snippets.

@jveitchmichaelis

jveitchmichaelis/rock960_boot

Created April 3, 2019 15:40
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save jveitchmichaelis/5e61fbdbb76ad2edc5eb2217835ad4e4 to your computer and use it in GitHub Desktop.
Save jveitchmichaelis/5e61fbdbb76ad2edc5eb2217835ad4e4 to your computer and use it in GitHub Desktop.
Download ZIP
Rock960 boot output
Raw
rock960_boot
switch to partitions #0, OK
mmc0(part 0) is current device
DDR Version 1.12 20180518
In
Channel 0: LPDDR3, 800MHz
CS = 0
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x3
MR5=0x1
MR6=0x5
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=32 Size=1024MB
Channel 1: LPDDR3, 800MHz
CS = 0
MR0=0x58
MR1=0x58
MR2=0x58
MR3=0x58
MR4=0x3
MR5=0x1
MR6=0x5
MR7=0x0
MR8=0x1F
MR9=0x1F
MR10=0x1F
MR11=0x1F
MR12=0x1F
MR13=0x1F
MR14=0x1F
MR15=0x1F
MR16=0x1F
Bus Width=32 Col=10 Bank=8 Row=15 CS=1 Die Bus-Width=32 Size=1024MB
256B stride
ch 0 ddrconfig = 0x101, ddrsize = 0x20
ch 1 ddrconfig = 0x101, ddrsize = 0x20
pmugrf_os_reg[2] = 0x3280D280, stride = 0x9
OUT
Boot1: 2018-04-08, version: 1.12
CPUId = 0x0
ChipType = 0x10, 217
SdmmcInit=2 0
BootCapSize=100000
UserCapSize=14910MB
FwPartOffset=2000 , 100000
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
mmc0:cmd8,32
mmc0:cmd5,32
mmc0:cmd55,32
mmc0:cmd1,32
SdmmcInit=0 1
StorageInit ok = 67909
LoadTrustBL
No find bl30.bin
No find bl32.bin
Load uboot, ReadLba = 2000
Load OK, addr=0x200000, size=0xa13b0
RunBL31 0x10000
[01]NOTICE: BL31: v1.3(debug):65aa5ce
NOTICE: BL31: Built : 10:47:37, Jun 19 2018
NOTICE: BL31: Rockchip release version: v1.1
INFO: GICv3 with legacy support detected. ARM GICV3 driver initialized in EL3
INFO: Using opteed sec cpu_context!
INFO: boot cpu mask: 0
INFO: plat_rockchip_pmu_init(1151): pd status 3e
INFO: BL31: Initializing runtime services
WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK
ERROR: Error initializing runtime service opteed_fast
INFO: BL31: Preparing for EL3 exit to normal world
INFO: Entry point address = 0x200000
INFO: SPSR = 0x3c9
U-Boot 2017.09-g01c5534-dirty (Apr 01 2019 - 19:13:27 +0000)
Model: Rockchip RK3399 Evaluation Board
DRAM: 2 GiB
MMC: dwmmc@fe320000: 1, sdhci@fe330000: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
Model: Rockchip RK3399 Evaluation Board
Pcie: Enable Power
Net: No ethernet found.
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0(part 0) is current device
Scanning mmc 0:4...
Found /extlinux/extlinux.conf
Retrieving file: /extlinux/extlinux.conf
reading /extlinux/extlinux.conf
191 bytes read in 11 ms (16.6 KiB/s)
1: kernel-4.4
Retrieving file: /Image
reading /Image
18792456 bytes read in 843 ms (21.3 MiB/s)
append: earlyprintk console=ttyFIQ0,1500000n8 rw root=PARTUUID=b921b045-1d rootfstype=ext4 init=/sbin/init rootwait
Retrieving file: /rock960-model-ab-linux.dtb
reading /rock960-model-ab-linux.dtb
74316 bytes read in 21 ms (3.4 MiB/s)
## Flattened Device Tree blob at 01f00000
Booting using the fdt blob at 0x1f00000
Loading Device Tree to 000000007deef000, end 000000007df0424b ... OK
Starting kernel ...
<hit enter to activate fiq debugger>
[ 0.000000] Booting Linux on physical CPU 0x0
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Initializing cgroup subsys cpuacct
[ 0.000000] Linux version 4.4.103 (root@5e902413b4d3) (gcc version 5.4.0 20160609 (Ubuntu/Linaro 5.4.0-6ubuntu1~16.04.9) ) #1 SMP Mon Apr 1 19:12:43 UTC 2019
[ 0.000000] Boot CPU: AArch64 Processor [410fd034]
[ 0.000000] Reserved memory: failed to reserve memory for node 'drm-logo@00000000': base 0x0000000000000000, size 0 MiB
[ 0.000000] psci: probing for conduit method from DT.
[ 0.000000] psci: PSCIv1.0 detected in firmware.
[ 0.000000] psci: Using standard PSCI v0.2 function IDs
[ 0.000000] psci: MIGRATE_INFO_TYPE not supported.
[ 0.000000] PERCPU: Embedded 21 pages/cpu @ffffffc07fef8000 s45800 r8192 d32024 u86016
[ 0.000000] Detected VIPT I-cache on CPU0
[ 0.000000] CPU features: enabling workaround for ARM erratum 845719
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 515592
[ 0.000000] Kernel command line: earlyprintk console=ttyFIQ0,1500000n8 rw root=PARTUUID=b921b045-1d rootfstype=ext4 init=/sbin/init rootwait
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] Dentry cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.000000] Inode-cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.000000] software IO TLB [mem 0x79800000-0x7d800000] (64MB) mapped at [ffffffc079800000-ffffffc07d7fffff]
[ 0.000000] Memory: 1973032K/2095104K available (11326K kernel code, 1584K rwdata, 4260K rodata, 1152K init, 740K bss, 122072K reserved, 0K cma-reserved)
[ 0.000000] Virtual kernel memory layout:
[ 0.000000] modules : 0xffffff8000000000 - 0xffffff8008000000 ( 128 MB)
[ 0.000000] vmalloc : 0xffffff8008000000 - 0xffffffbdbfff0000 ( 246 GB)
[ 0.000000] .init : 0xffffff8008fc0000 - 0xffffff80090e0000 ( 1152 KB)
[ 0.000000] .text : 0xffffff8008080000 - 0xffffff8008b90000 ( 11328 KB)
[ 0.000000] .rodata : 0xffffff8008b90000 - 0xffffff8008fc0000 ( 4288 KB)
[ 0.000000] .data : 0xffffff80090e0000 - 0xffffff800926c008 ( 1585 KB)
[ 0.000000] vmemmap : 0xffffffbdc0000000 - 0xffffffbfc0000000 ( 8 GB maximum)
[ 0.000000] 0xffffffbdc0008000 - 0xffffffbdc2000000 ( 31 MB actual)
[ 0.000000] fixed : 0xffffffbffe7fd000 - 0xffffffbffec00000 ( 4108 KB)
[ 0.000000] PCI I/O : 0xffffffbffee00000 - 0xffffffbfffe00000 ( 16 MB)
[ 0.000000] memory : 0xffffffc000200000 - 0xffffffc080000000 ( 2046 MB)
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=6, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] Build-time adjustment of leaf fanout to 64.
[ 0.000000] RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=6.
[ 0.000000] RCU: Adjusting geometry for rcu_fanout_leaf=64, nr_cpu_ids=6
[ 0.000000] NR_IRQS:64 nr_irqs:64 0
[ 0.000000] GIC: Using split EOI/Deactivate mode
[ 0.000000] ITS: /interrupt-controller@fee00000/interrupt-controller@fee20000
[ 0.000000] ITS: allocated 65536 Devices @300000 (psz 64K, shr 0)
[ 0.000000] ITS: using cache flushing for cmd queue
[ 0.000000] GIC: using LPI property table @0x0000000000290000
[ 0.000000] ITS: Allocated 1792 chunks for LPIs
[ 0.000000] CPU0: found redistributor 0 region 0:0x00000000fef00000
[ 0.000000] CPU0: using LPI pending table @0x00000000002a0000
[ 0.000000] GIC: using cache flushing for LPI property table
[ 0.000000] GIC: PPI partition interrupt-partition-0[0] { /cpus/cpu@0[0] /cpus/cpu@1[1] /cpus/cpu@2[2] /cpus/cpu@3[3] }
[ 0.000000] GIC: PPI partition interrupt-partition-1[1] { /cpus/cpu@100[4] /cpus/cpu@101[5] }
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop0_frac as parent of dclk_vop0, rate changes may not work
[ 0.000000] rockchip_clk_register_frac_branch: could not find dclk_vop1_frac as parent of dclk_vop1, rate changes may not work
[ 0.000000] Architected cp15 timer(s) running at 24.00MHz (phys).
[ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[ 0.000005] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[ 0.001262] Console: colour dummy device 80x25
[ 0.001288] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=24000)
[ 0.001302] pid_max: default: 32768 minimum: 301
[ 0.001454] Mount-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.001467] Mountpoint-cache hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.002155] Initializing cgroup subsys devices
[ 0.002174] Initializing cgroup subsys freezer
[ 0.002228] ftrace: allocating 41477 entries in 163 pages
[ 0.105674] sched-energy: Sched-energy-costs installed from DT
[ 0.105694] CPU0: update cpu_capacity 401
[ 0.105748] ASID allocator initialised with 65536 entries
[ 0.108780] PCI/MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.109248] Platform MSI: /interrupt-controller@fee00000/interrupt-controller@fee20000 domain created
[ 0.110458] Detected VIPT I-cache on CPU1
[ 0.110492] CPU1: found redistributor 1 region 0:0x00000000fef20000
[ 0.110522] CPU1: using LPI pending table @0x0000000079110000
[ 0.110565] CPU1: update cpu_capacity 401
[ 0.110569] CPU1: Booted secondary processor [410fd034]
[ 0.111109] Detected VIPT I-cache on CPU2
[ 0.111131] CPU2: found redistributor 2 region 0:0x00000000fef40000
[ 0.111160] CPU2: using LPI pending table @0x0000000079140000
[ 0.111188] CPU2: update cpu_capacity 401
[ 0.111192] CPU2: Booted secondary processor [410fd034]
[ 0.111682] Detected VIPT I-cache on CPU3
[ 0.111703] CPU3: found redistributor 3 region 0:0x00000000fef60000
[ 0.111730] CPU3: using LPI pending table @0x0000000079190000
[ 0.111757] CPU3: update cpu_capacity 401
[ 0.111760] CPU3: Booted secondary processor [410fd034]
[ 0.112250] Detected PIPT I-cache on CPU4
[ 0.112276] CPU4: found redistributor 100 region 0:0x00000000fef80000
[ 0.112316] CPU4: using LPI pending table @0x00000000791c0000
[ 0.112355] CPU4: update cpu_capacity 1024
[ 0.112359] CPU4: Booted secondary processor [410fd082]
[ 0.112894] Detected PIPT I-cache on CPU5
[ 0.112913] CPU5: found redistributor 101 region 0:0x00000000fefa0000
[ 0.112950] CPU5: using LPI pending table @0x0000000079200000
[ 0.112978] CPU5: update cpu_capacity 1024
[ 0.112982] CPU5: Booted secondary processor [410fd082]
[ 0.113066] Brought up 6 CPUs
[ 0.113149] SMP: Total of 6 processors activated.
[ 0.113159] CPU features: detected feature: GIC system register CPU interface
[ 0.113171] CPU: All CPU(s) started at EL2
[ 0.113218] alternatives: patching kernel code
[ 0.114609] devtmpfs: initialized
[ 0.128733] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 1911260446275000 ns
[ 0.128757] futex hash table entries: 2048 (order: 5, 131072 bytes)
[ 0.129216] pinctrl core: initialized pinctrl subsystem
[ 0.129927] NET: Registered protocol family 16
[ 0.133115] cpuidle: using governor ladder
[ 0.137129] cpuidle: using governor menu
[ 0.137150] Registered FIQ tty driver
[ 0.137334] vdso: 2 pages (1 code @ ffffff8008b96000, 1 data @ ffffff80090e4000)
[ 0.137361] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[ 0.137521] DMA: preallocated 256 KiB pool for atomic allocations
[ 0.220289] console [ttyFIQ0] enabled
[ 0.220823] Registered fiq debugger ttyFIQ0
[ 0.247922] vcc3v3_sys: supplied by vcc_sys
[ 0.248671] vcc3v3_pcie: supplied by vcc3v3_sys
[ 0.250062] iommu: Adding device ff650000.vpu_service to group 0
[ 0.250677] iommu: Adding device ff660000.rkvdec to group 1
[ 0.251263] iommu: A
[ 0.311949] thermal thermal_zone1: power_allocator: sustainable_power will be estimated
[ 0.312885] NET: Registered protocol family 2
[ 0.313698] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
[ 0.314440] TCP bind hash table entries: 16384 (order: 7, 524288 bytes)
[ 0.315463] TCP: Hash tables configured (established 16384 bind 16384)
[ 0.316137] UDP hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.316729] UDP-Lite hash table entries: 1024 (order: 4, 98304 bytes)
[ 0.317572] NET: Registered protocol family 1
[ 0.318282] RPC: Registered named UNIX socket transport module.
[ 0.318824] RPC: Registered udp transport module.
[ 0.319241] RPC: Registered tcp transport module.
[ 0.319657] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 0.320840] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
[ 0.321633] hw perfevents: enabled with armv8_cortex_a72 PMU driver, 7 counters available
[ 0.325394] Initialise system trusted keyring
[ 0.334004] NFS: Registering the id_resolver key type
[ 0.334475] Key type id_resolver registered
[ 0.334857] Key type id_legacy registered
[ 0.335270] fuse init (API version 7.23)
[ 0.335997] SGI XFS with security attributes, no debug enabled
[ 0.341119] NET: Registered protocol family 38
[ 0.341533] Key type asymmetric registered
[ 0.341928] Asymmetric key parser 'x509' registered
[ 0.342518] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
[ 0.343191] io scheduler noop registered
[ 0.343543] io scheduler deadline registered
[ 0.344052] io scheduler cfq registered (default)
[ 0.345875] rockchip-usb2phy ff770000.syscon:usb2-phy@e460: vbus_drv is not assigned
[ 0.351046] rockchip-pcie f8000000.pcie: no vpcie3v3 regulator found
[ 0.351625] rockchip-pcie f8000000.pcie: no vpcie1v8 regulator found
[ 0.352215] rockchip-pcie f8000000.pcie: no vpcie0v9 regulator found
[ 0.894814] rockchip-pcie f8000000.pcie: PCIe link training gen1 timeout!
[ 0.895540] rockchip-pcie: probe of f8000000.pcie failed with error -110
[ 0.897523] rk-vcodec ff650000.vpu_service: probe device
[ 0.898066] rk-vcodec ff650000.vpu_service: vpu mmu dec ffffffc078c27010
[ 0.898909] rk-vcodec ff650000.vpu_service: allocator is drm
[ 0.899474] rk-vcodec ff650000.vpu_service: checking hw id 0
[ 0.900607] rk-vcodec ff650000.vpu_service: init success
[ 0.901921] rk-vcodec ff660000.rkvdec: probe device
[ 0.902392] rk-vcodec ff660000.rkvdec: vpu mmu dec ffffffc078c27810
[ 0.903126] rk-vcodec ff660000.rkvdec: allocator is drm
[ 0.903639] rk-vcodec ff660000.rkvdec: checking hw id 6876
[ 0.904454] rk-vcodec ff660000.rkvdec: init success
[ 0.906288] dma-pl330 ff6d0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.906970] dma-pl330 ff6d0000.dma-controller: DBUFF-32x8bytes Num_Chans-6 Num_Peri-12 Num_Events-12
[ 0.909245] dma-pl330 ff6e0000.dma-controller: Loaded driver for PL330 DMAC-241330
[ 0.909926] dma-pl330 ff6e0000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-20 Num_Events-16
[ 0.911706] Serial: 8250/16550 driver, 5 ports, IRQ sharing disabled
[ 0.913921] ff180000.serial: ttyS0 at MMIO 0xff180000 (irq = 36, base_baud = 1500000) is a 16550A
[ 0.915395] ff1b0000.serial: ttyS3 at MMIO 0xff1b0000 (irq = 37, base_baud = 1500000) is a 16550A
[ 0.916806] ff370000.serial: ttyS4 at MMIO 0xff370000 (irq = 40, base_baud = 1500000) is a 16550A
[ 0.918559] [drm:drm_core_init] Initialized drm 1.1.0 20060810
[ 0.922377] rockchip-drm display-subsystem: bound ff900000.vop (ops 0xffffff8008c2cb30)
[ 0.923307] rockchip-drm display-subsystem: bound ff8f0000.vop (ops 0xffffff8008c2cb30)
[ 0.924268] i2c i2c-9: of_i2c: modalias failure on /hdmi@ff940000/ports
[ 0.924871] dwhdmi-rockchip ff940000.hdmi: registered DesignWare HDMI I2C bus driver
[ 0.925608] dwhdmi-rockchip ff940000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY)
[ 0.927123] rockchip-drm display-subsystem: bound ff940000.hdmi (ops 0xffffff8008c25be8)
[ 0.927853] [drm:drm_vblank_init] Supports vblank timestamp caching Rev 2 (21.10.2013).
[ 0.928555] [drm:drm_vblank_init] No driver support for vblank timestamp query.
[ 0.929358] rockchip-drm display-subsystem: failed to parse loader memory
[ 0.929985] rockchip-drm display-subsystem: No connectors reported connected with modes
[ 0.930716] [drm:drm_fb_helper_single_fb_probe] Cannot find any crtc or sizes - going 1024x768
[ 0.943649] Console: switching to colour frame buffer device 128x48
[ 0.951203] rockchip-drm display-subsystem: fb0: frame buffer device
[ 0.959495] mali ff9a0000.gpu: Failed to get regulator
[ 0.959969] mali ff9a0000.gpu: Power control initialization failed
[ 0.960866] Unable to detect cache hierarchy from DT for CPU 0
[ 0.962153] brd: module loaded
[ 0.967513] loop: module loaded
[ 0.968343] zram: Added device: zram0
[ 0.968963] lkdtm: No crash points registered, enable through debugfs
[ 0.971006] spidev spi32766.0: buggy DT: spidev listed directly in DT
[ 0.971602] ------------[ cut here ]------------
[ 0.972007] WARNING: at drivers/spi/spidev.c:720
[ 0.972412] Modules linked in:
[ 0.972701]
[ 0.972841] CPU: 5 PID: 1 Comm: swapper/0 Not tainted 4.4.103 #1
[ 0.973374] Hardware name: ROCK960 - 96boards based on Rockchip RK3399 (DT)
[ 0.973991] task: ffffffc0003d8000 task.stack: ffffffc079080000
[ 0.974527] PC is at spidev_probe+0x1c4/0x1ec
[ 0.974921] LR is at spidev_probe+0x68/0x1ec
[ 0.975303] pc : [<ffffff8008583ea8>] lr : [<ffffff8008583d4c>] pstate: 60000045
[ 0.975953] sp : ffffffc0790838c0
[ 0.976252] x29: ffffffc0790838c0 x28: 0000000000000000
[ 0.976744] x27: ffffff80090a85f0 x26: 0000000000000000
[ 0.977234] x25: 0000000000000000 x24: ffffff80092f1000
[ 0.977724] x23: ffffff8009170000 x22: ffffff800917a6d8
[ 0.978214] x21: 0000000000000000 x20: ffffffc07808c000
[ 0.978703] x19: ffffff8008c46fa8 x18: 00000000000ed0fe
[ 0.979193] x17: 0000000000000060 x16: 000000000000000e
[ 0.979683] x15: 000000000000000a x14: ffffff8089273817
[ 0.980172] x13: 0000000000000005 x12: 0000000000000000
[ 0.980662] x11: 0101010101010101 x10: 7f7f7f7f7f7f7f7f
[ 0.981151] x9 : 6900feff02fefeff x8 : 7f7f7f7f7f7f7f7f
[ 0.981641] x7 : 01fefefefefefeff x6 : 8080808080808000
[ 0.982131] x5 : 0080808080808080 x4 : 76656469ffffffff
[ 0.982620] x3 : 6a02000004000000 x2 : 0000004076eb7000
[ 0.983110] x1 : 0000000000000005 x0 : 0000000000000000
[ 0.983600]
[ 0.983600] PC: 0xffffff8008583e28:
[ 0.984040] 3e28 9111a000 79404401 36100401 90004842 aa1403e1 9127d442 97f8f898 1400001b
[ 0.984810] 3e48 910922c1 2a1903e0 91002021 52800015 97f8707e 91198301 aa0103e0 f8440c02
[ 0.985578] 3e68 f9002037 f9000457 f9001662 f90006e0 91198300 9417f4c8 b9433a80 b9009260
[ 0.986345] 3e88 35000095 52800000 f9005e93 14000009 aa1303e0 97f06fe8 2a1503e0 14000005
[ 0.987113] 3ea8 d4210000 17ffffa9 12800255 17fffff1 a94153f3 a9425bf5 a94363f7 f94023f9
[ 0.987880] 3ec8 a8c57bfd d65f03c0 a9bc7bfd 910003fd a90153f3 a9025bf5 f9001bf7 aa0003f6
[ 0.988648] 3ee8 aa1e03e0 f0005fb5 aa0103f7 911982b4 d503201f aa1403e0 9417f47d f9402293
[ 0.989416] 3f08 91010280 d100a273 9100a261 eb00003f 54000100 b9400262 b94046c1 6b01005f
[ 0.990185]
[ 0.990185] LR: 0xffffff8008583ccc:
[ 0.990624] 3ccc 9417f534 52800000 a94153f3 a9425bf5 a8c37bfd d65f03c0 a9bb7bfd 910003fd
[ 0.991392] 3cec a90153f3 a9025bf5 a90363f7 f90023f9 aa0003f4 aa1e03e0 d503201f f9415680
[ 0.992160] 3d0c b4000220 f0003613 aa1403e1 913ea273 aa1303e0 940dd83f b5000160 90004841
[ 0.992927] 3d2c aa1403e0 91264c21 97fe75be f9415680 b40000a0 aa1403e1 aa1303e0 940dd835
[ 0.993695] 3d4c b4000ae0 d0006ac0 52901801 d2801302 72a04801 f9414c00 97f06b90 aa0003f3
[ 0.994463] 3d6c 12800160 b4000a53 f0006b76 90004841 910922d5 9126ec21 910042b7 91002260
[ 0.995230] 3d8c aa1703e2 f9001274 f0005fb8 97ed8a38 90004841 aa1703e2 91275c21 9100e260
[ 0.995998] 3dac 9100a277 97ed8212 f9001677 91198300 f90006f7 9417f4cd 910022a0 d2800002
[ 0.996767]
[ 0.996767] SP: 0xffffffc079083840:
[ 0.997206] 3840 0917a6d8 ffffff80 09170000 ffffff80 092f1000 ffffff80 00000000 00000000
[ 0.997974] 3860 00000000 00000000 090a85f0 ffffff80 00000000 00000000 790838c0 ffffffc0
[ 0.998742] 3880 08583d4c ffffff80 790838c0 ffffffc0 08583ea8 ffffff80 60000045 00000000
[ 0.999509] 38a0 790838c0 ffffffc0 08583d4c ffffff80 ffffffff ffffffff 7808c000 ffffffc0
[ 1.000277] 38c0 79083910 ffffffc0 08580f50 ffffff80
[ 1.099484] ehci-platform fe3c0000.usb: EHCI Host Controller
[ 1.100149] ehci-platform fe3c0000.usb: new USB bus registered, assigned bus number 1
[ 1.100958] ehci-platform fe3c0000.usb: irq 29, io mem 0xfe3c0000
[ 1.106771] ehci-platform fe3c0000.usb: USB 2.0 started, EHCI 1.00
[ 1.107470] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.108081] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.108724] usb usb1: Product: EHCI Host Controller
[ 1.109166] usb usb1: Manufacturer: Linux 4.4.103 ehci_hcd
[ 1.109654] usb usb1: SerialNumber: fe3c0000.usb
[ 1.110515] hub 1-0:1.0: USB hub found
[ 1.110888] hub 1-0:1.0: 1 port detected
[ 1.111778] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.112339] ohci-platform: OHCI generic platform driver
[ 1.113277] ohci-platform fe3e0000.usb: Generic Platform OHCI controller
[ 1.114051] ohci-platform fe3e0000.usb: new USB bus registered, assigned bus number 2
[ 1.114838] ohci-platform fe3e0000.usb: irq 30, io mem 0xfe3e0000
[ 1.169909] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.170507] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.171160] usb usb2: Product: Generic Platform OHCI controller
[ 1.171684] usb usb2: Manufacturer: Linux 4.4.103 ohci_hcd
[ 1.172180] usb usb2: SerialNumber: fe3e0000.usb
[ 1.173031] hub 2-0:1.0: USB hub found
[ 1.173391] hub 2-0:1.0: 1 port detected
[ 1.174608] usbcore: registered new interface driver cdc_acm
[ 1.175123] cdc_acm: USB Abstract Control Model driver for USB modems and ISDN adapters
[ 1.175872] usbcore: registered new interface driver cdc_wdm
[ 1.176410] usbcore: registered new interface driver uas
[ 1.176965] usbcore: registered new interface driver usb-storage
[ 1.177573] usbcore: registered new interface driver usbserial
[ 1.178125] usbcore: registered new interface driver usbserial_generic
[ 1.178728] usbserial: USB Serial support registered for generic
[ 1.179309] usbcore: registered new interface driver cp210x
[ 1.179839] usbserial: USB Serial support registered for cp210x
[ 1.180405] usbcore: registered new interface driver ftdi_sio
[ 1.180951] usbserial: USB Serial support registered for FTDI USB Serial Device
[ 1.181666] usbcore: registered new interface driver keyspan
[ 1.182197] usbserial: USB Serial support registered for Keyspan - (without firmware)
[ 1.182917] usbserial: USB Serial support registered for Keyspan 1 port adapter
[ 1.183577] usbserial: USB Serial support registered for Keyspan 2 port adapter
[ 1.184248] usbserial: USB Serial support registered for Keyspan 4 port adapter
[ 1.184936] usbcore: registered new interface driver option
[ 1.185448] usbserial: USB Serial support registered for GSM modem (1-port)
[ 1.186170] usbcore: registered new interface driver oti6858
[ 1.186689] usbserial: USB Serial support registered for oti6858
[ 1.187268] usbcore: registered new interface driver pl2303
[ 1.187788] usbserial: USB Serial support registered for pl2303
[ 1.188350] usbcore: registered new interface driver qcserial
[ 1.188892] usbserial: USB Serial support registered for Qualcomm USB modem
[ 1.189548] usbcore: registered new interface driver sierra
[ 1.190084] usbserial: USB Serial support registered for Sierra USB modem
[ 1.191696] usbcore: registered new interface driver usbtouchscreen
[ 1.192616] i2c /dev entries driver
[ 1.194340] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected!
[ 1.195017] fan53555-reg: supplied by vcc_sys
[ 1.197499] fan53555-regulator 0-0041: FAN53555 Option[8] Rev[1] Detected!
[ 1.198162] fan53555-reg: supplied by vcc_sys
[ 1.200685] rk808 0-001b: Pmic Chip id: 0x0
[ 1.203802] rk808-regulator rk808-regulator: there is no dvs0 gpio
[ 1.204392] rk808-regulator rk808-regulator: there is no dvs1 gpio
[ 1.205033] DCDC_REG1: supplied by vcc_sys
[ 1.206101] DCDC_REG2: supplied by vcc_sys
[ 1.206999] DCDC_REG3: supplied by vcc_sys
[ 1.207612] DCDC_REG4: supplied by vcc_sys
[ 1.208411] LDO_REG1: supplied by vcc_sys
[ 1.209878] LDO_REG2: supplied by vcc_sys
[ 1.211167] LDO_REG3: supplied by vcc_sys
[ 1.212462] LDO_REG4: supplied by vcc_sys
[ 1.213798] LDO_REG5: supplied by vcc_sys
[ 1.215087] LDO_REG6: supplied by vcc_sys
[ 1.216381] LDO_REG7: supplied by vcc_sys
[ 1.217702] LDO_REG8: supplied by vcc_sys
[ 1.219017] SWITCH_REG1: supplied by vcc3v3_sys
[ 1.219668] SWITCH_REG2: supplied by vcc3v3_sys
[ 1.223517] rk808-rtc rk808-rtc: rtc core: registered rk808-rtc as rtc0
[ 1.224559] rk3x-i2c ff3c0000.i2c: Initialized RK3xxx I2C bus at ffffff80094c8000
[ 1.225734] rk3x-i2c ff110000.i2c: Initialized RK3xxx I2C bus at ffffff80094ca000
[ 1.226838] rk3x-i2c ff120000.i2c: Initialized RK3xxx I2C bus at ffffff80094cc000
[ 1.227931] rk3x-i2c ff150000.i2c: Initialized RK3xxx I2C bus at ffffff80094ce000
[ 1.239164] fusb302 4-0022: port 0 probe success
[ 1.239593] rk3x-i2c ff3d0000.i2c: Initialized RK3xxx I2C bus at ffffff80094d0000
[ 1.241189] IR NEC protocol handler initialized
[ 1.241962] usbcore: registered new interface driver uvcvideo
[ 1.242472] USB Video Class driver (1.1.1)
[ 1.245301] rk_tsadcv2_temp_to_code: Invalid conversion table: code=1023, temperature=2147483647
[ 1.246903] Bluetooth: Virtual HCI driver ver 1.5
[ 1.247441] Bluetooth: HCI UART driver ver 2.3
[ 1.247853] Bluetooth: HCI UART protocol H4 registered
[ 1.248306] Bluetooth: HCI UART protocol LL registered
[ 1.248768] Bluetooth: HCI UART protocol ATH3K registered
[ 1.249306] usbcore: registered new interface driver bfusb
[ 1.249854] usbcore: registered new interface driver btusb
[ 1.250721] cpu cpu0: leakage=24
[ 1.251757] cpu cpu0: pvtm-sel=0
[ 1.252312] cpu cpu4: leakage=43
[ 1.254646] cpu cpu4: pvtm-sel=0
[ 1.258873] sdhci: Secure Digital Host Controller Interface driver
[ 1.259421] sdhci: Copyright(c) Pierre Ossman
[ 1.259833] Synopsys Designware Multimedia Card Interface Driver
[ 1.261225] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.261907] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 1.262510] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 1.263070] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo
[ 1.263953] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 1.264733] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[ 1.265288] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[ 1.266632] dwmmc_rockchip fe320000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.267334] dwmmc_rockchip fe320000.dwmmc: Using internal DMA controller.
[ 1.267960] dwmmc_rockchip fe320000.dwmmc: Version ID is 270a
[ 1.268505] dwmmc_rockchip fe320000.dwmmc: DW MMC controller at irq 25,32 bit host data width,256 deep fifo
[ 1.269381] dwmmc_rockchip fe320000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 1.270206] dwmmc_rockchip fe320000.dwmmc: No vmmc regulator found
[ 1.270999] vcc_sd: unsupportable voltage range: 3300000-3000000uV
[ 1.271557] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[ 1.272228] rockchip-iodomain ff770000.syscon:io-domains: Setting to 3000000 done
[ 1.283802] mmc_host mmc0: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.295030] dwmmc_rockchip fe320000.dwmmc: 1 slots initialized
[ 1.295952] sdhci-pltfm: SDHCI platform and OF driver helper
[ 1.298236] sdhci-arasan fe330000.sdhci: No vmmc regulator found
[ 1.298784] sdhci-arasan fe330000.sdhci: No vqmmc regulator found
[ 1.325940] mmc1: SDHCI controller on fe330000.sdhci [fe330000.sdhci] using ADMA
[ 1.327321] hidraw: raw HID events driver (C) Jiri Kosina
[ 1.328155] usbcore: registered new interface driver usbhid
[ 1.328654] usbhid: USB HID core driver
[ 1.329708] ff100000.saradc supply vref not found, using dummy regulator
[ 1.331355] usbcore: registered new interface driver snd-usb-audio
[ 1.336124] Initializing XFRM netlink socket
[ 1.337199] NET: Registered protocol family 10
[ 1.338953] NET: Registered protocol family 17
[ 1.339382] NET: Registered protocol family 15
[ 1.339842] bridge: automatic filtering via arp/ip/ip6tables has been deprecated. Update your scripts to load br_netfilter if you need this.
[ 1.341387] Bluetooth: RFCOMM socket layer initialized
[ 1.341981] Bluetooth: RFCOMM ver 1.11
[ 1.342346] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
[ 1.342901] Bluetooth: HIDP socket layer initialized
[ 1.343404] [WLAN_RFKILL]: Enter rfkill_wlan_init
[ 1.344129] [WLAN_RFKILL]: Enter rfkill_wlan_probe
[ 1.344598] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi_chip_type = ap6354
[ 1.345214] [WLAN_RFKILL]: wlan_platdata_parse_dt: enable wifi power control.
[ 1.345851] [WLAN_RFKILL]: wlan_platdata_parse_dt: wifi power controled by gpio.
[ 1.346566] [WLAN_RFKILL]: wlan_platdata_parse_dt: get property: WIFI,host_wake_irq = 1003, flags = 0.
[ 1.347394] [WLAN_RFKILL]: rfkill_wlan_probe: init gpio
[ 1.347869] [WLAN_RFKILL]: Exit rfkill_wlan_probe
[ 1.348338] [BT_RFKILL]: Enter rfkill_rk_init
[ 1.349081] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: uart_rts_gpios = 1083.
[ 1.349851] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,reset_gpio = 1009.
[ 1.350595] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_gpio = 1091.
[ 1.351339] [BT_RFKILL]: bluetooth_platdata_parse_dt: get property: BT,wake_host_irq = 1004.
[ 1.352674] [BT_RFKILL]: Request irq for bt wakeup host
[ 1.353229] [BT_RFKILL]: ** disable irq
[ 1.353728] [BT_RFKILL]: bt_default device registered.
[ 1.354275] Key type dns_resolver registered
[ 1.355683] cif_isp10_v4l2_drv_probe: probing...
[ 1.356212] cif_isp10_pltfrm_dev_init(1224) ERR: could not get default pinstate
[ 1.356876] cif_isp10_pltfrm_dev_init WARN: could not get pins_sleep pinstate
[ 1.357506] cif_isp10_pltfrm_dev_init WARN: could not get pins_inactive pinstate
[ 1.358892] cif_isp10_pltfrm_get_img_src_device(1644) ERR: could not get camera i2c client, maybe not yet created, deferring device probing...
[ 1.360029] cif_isp10_img_srcs_init(1099) ERR: failed with error -14
[ 1.360587] cif_isp10_create(5772) ERR: cif_isp10_img_srcs_init failed
[ 1.361176] cif_isp10_create(5808) ERR: failed with error -14
[ 1.362162] Registered cp15_barrier emulation handler
[ 1.362802] Registered setend emulation handler
[ 1.363788] Loading compiled-in X.509 certificates
[ 1.366202] rockchip-usb2phy ff770000.syscon:usb2-phy@e450: vbus_drv is not assigned
[ 1.370548] mali ff9a0000.gpu: leakage=32
[ 1.374996] mali ff9a0000.gpu: pvtm-sel=0
[ 1.375663] mmc1: MAN_BKOPS_EN bit is not set
[ 1.377388] mali ff9a0000.gpu: GPU identified as 0x0860 r2p0 status 0
[ 1.378424] mali ff9a0000.gpu: Protected mode not available
[ 1.379442] mali ff9a0000.gpu: Error -22, no DT entry: mali-simple-power-model.static-coefficient = 1*[0]
[ 1.380395] mali ff9a0000.gpu: Error -22, no DT entry: mali-simple-power-model.dynamic-coefficient = 1*[0]
[ 1.381335] mali ff9a0000.gpu: Using configured power model mali-simple-power-model, and fallback mali-simple-power-model
[ 1.382549] I : [File] : drivers/gpu/arm/midgard/backend/gpu/mali_kbase_devfreq.c; [Line] : 381; [Func] : kbase_devfreq_init(); success initing power_model_simple.
[ 1.384490] mali ff9a0000.gpu: Probed as mali0
[ 1.391239] mmc1: new HS400 Enhanced strobe MMC card at address 0001
[ 1.391335] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[ 1.392850] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 3
[ 1.393249] mmcblk1: mmc1:0001 AJTD4R 14.6 GiB
[ 1.394014] mmcblk1boot0: mmc1:0001 AJTD4R partition 1 4.00 MiB
[ 1.394150] xhci-hcd xhci-hcd.7.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[ 1.394217] xhci-hcd xhci-hcd.7.auto: irq 231, io mem 0xfe800000
[ 1.394431] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.394439] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.394445] usb usb3: Product: xHCI Host Controller
[ 1.394451] usb usb3: Manufacturer: Linux 4.4.103 xhci-hcd
[ 1.394457] usb usb3: SerialNumber: xhci-hcd.7.auto
[ 1.395184] hub 3-0:1.0: USB hub found
[ 1.395221] hub 3-0:1.0: 1 port detected
[ 1.395593] xhci-hcd xhci-hcd.7.auto: xHCI Host Controller
[ 1.395876] xhci-hcd xhci-hcd.7.auto: new USB bus registered, assigned bus number 4
[ 1.395971] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.396095] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.396103] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.396110] usb usb4: Product: xHCI Host Controller
[ 1.396116] usb usb4: Manufacturer: Linux 4.4.103 xhci-hcd
[ 1.396121] usb usb4: SerialNumber: xhci-hcd.7.auto
[ 1.396799] hub 4-0:1.0: USB hub found
[ 1.396833] hub 4-0:1.0: 1 port detected
[ 1.398406] xhci-hcd xhci-hcd.7.auto: remove, state 1
[ 1.398426] usb usb4: USB disconnect, device number 1
[ 1.406097] mmcblk1boot1: mmc1:0001 AJTD4R partition 2 4.00 MiB
[ 1.407159] mmcblk1rpmb: mmc1:0001 AJTD4R partition 3 4.00 MiB
[ 1.422447] xhci-hcd xhci-hcd.7.auto: Host not halted after 16000 microseconds.
[ 1.423098] xhci-hcd xhci-hcd.7.auto: Host controller not halted, aborting reset.
[ 1.423804] xhci-hcd xhci-hcd.7.auto: USB bus 4 deregistered
[ 1.424568] xhci-hcd xhci-hcd.7.auto: remove, state 1
[ 1.425093] usb usb3: USB disconnect, device number 1
[ 1.426237] xhci-hcd xhci-hcd.7.auto: USB bus 3 deregistered
[ 1.427800] mmcblk1: p1 p2 p3 p4 p5
[ 1.432894] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[ 1.433535] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3
[ 1.434379] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x02030010
[ 1.435192] xhci-hcd xhci-hcd.8.auto: irq 232, io mem 0xfe900000
[ 1.435866] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.436464] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.437125] usb usb3: Product: xHCI Host Controller
[ 1.437556] usb usb3: Manufacturer: Linux 4.4.103 xhci-hcd
[ 1.438056] usb usb3: SerialNumber: xhci-hcd.8.auto
[ 1.439210] hub 3-0:1.0: USB hub found
[ 1.439584] hub 3-0:1.0: 1 port detected
[ 1.440346] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[ 1.441229] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
[ 1.442004] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[ 1.442859] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.443466] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.444122] usb usb4: Product: xHCI Host Controller
[ 1.444564] usb usb4: Manufacturer: Linux 4.4.103 xhci-hcd
[ 1.445071] usb usb4: SerialNumber: xhci-hcd.8.auto
[ 1.446188] hub 4-0:1.0: USB hub found
[ 1.446552] hub 4-0:1.0: 1 port detected
[ 1.451606] ehci-platform fe380000.usb: EHCI Host Controller
[ 1.452327] ehci-platform fe380000.usb: new USB bus registered, assigned bus number 5
[ 1.453194] ehci-platform fe380000.usb: irq 27, io mem 0xfe380000
[ 1.459859] ehci-platform fe380000.usb: USB 2.0 started, EHCI 1.00
[ 1.460617] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.461243] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.461897] usb usb5: Product: EHCI Host Control
[ 1.523300] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001
[ 1.523931] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.524572] usb usb6: Product: Generic Platform OHCI controller
[ 1.525112] usb usb6: Manufacturer: Linux 4.4.103 ohci_hcd
[ 1.525600] usb usb6: SerialNumber: fe3a0000.usb
[ 1.526810] hub 6-0:1.0: USB hub found
[ 1.527177] hub 6-0:1.0: 1 port detected
[ 1.529254] dwmmc_rockchip fe310000.dwmmc: IDMAC supports 32-bit address mode.
[ 1.529989] dwmmc_rockchip fe310000.dwmmc: Using internal DMA controller.
[ 1.530602] dwmmc_rockchip fe310000.dwmmc: Version ID is 270a
[ 1.531162] dwmmc_rockchip fe310000.dwmmc: DW MMC controller at irq 24,32 bit host data width,256 deep fifo
[ 1.532059] dwmmc_rockchip fe310000.dwmmc: 'clock-freq-min-max' property was deprecated.
[ 1.532900] dwmmc_rockchip fe310000.dwmmc: No vmmc regulator found
[ 1.533447] dwmmc_rockchip fe310000.dwmmc: No vqmmc regulator found
[ 1.534453] dwmmc_rockchip fe310000.dwmmc: allocated mmc-pwrseq
[ 1.546068] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 1.558173] dwmmc_rockchip fe310000.dwmmc: 1 slots initialized
[ 1.560205] asoc-simple-card hdmi-codec: i2s-hifi <-> ff8a0000.i2s mapping ok
[ 1.563960] asoc-simple-card spdif-sound: dit-hifi <-> ff870000.spdif mapping ok
[ 1.567711]
[ 1.567798] dhd_module_init: in Dongle Host Driver, version 1.579.77.41.2 (r)
[ 1.567808] ======== dhd_wlan_init_plat_data ========
[ 1.567815] dhd_wlan_init_gpio: GPIO(WL_REG_ON) = -1
[ 1.567820] dhd_wlan_init_gpio: GPIO(WL_HOST_WAKE) = -1
[ 1.567827] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[ 1.567836] dhd_wlan_init_gpio: host_oob_irq: 71
[ 1.567840] dhd_wlan_init_gpio: host_oob_irq_flags=0x414
[ 1.567844] dhd_wifi_platform_load: Enter
[ 1.567874] Power-up adapter 'DHD generic adapter'
[ 1.567959] wifi_platform_set_power = 1
[ 1.567965] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 1.567970] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 1.567975] [WLAN_RFKILL]: wifi turn on power. -1
[ 1.573778] =======================================================
[ 1.574337] ==== Launching Wi-Fi driver! (Powered by Rockchip) ====
[ 1.574912] =======================================================
[ 1.575473] Realtek 8188EU USB WiFi driver (Powered by Rockchip,Ver v5.2.2.3_24783.20171030) init.
[ 1.576281] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 1.576708] [WLAN_RFKILL]: wifi turn on power. -1
[ 1.577149] RTW: module init start
[ 1.577467] RTW: rtl8188eu v5.2.2.3_24783.20171030
[ 1.577910] [WLAN_RFKILL]: rockchip_wifi_get_oob_irq: Enter
[ 1.578622] usbcore: registered new interface driver rtl8188eu
[ 1.579166] RTW: module init ret=0
[ 1.581374] rk808-rtc rk808-rtc: setting system clock to 2013-01-18 09:18:20 UTC (1358500700)
[ 1.605840] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 1.607902] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.609301] I : [File] : drivers/gpu/arm/mali400/mali/linux/mali_kernel_linux.c; [Line] : 414; [Func] : mali_module_init(); svn_rev_string_from_arm of this mali_ko is '-94108fb', rk_ko_ver is '5', built at '19:11:32', on 'Apr 1 2019'.
[ 1.609959] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 1.612268] Mali: Mali device driver loaded
[ 1.612784] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 1.613782] ALSA device list:
[ 1.614054] #0: HDMI-CODEC
[ 1.614322] #1: ROCKCHIP,SPDIF
[ 1.669679] mmc_host mmc2: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[ 1.703185] EXT4-fs (mmcblk1p5): recovery complete
[ 1.704392] EXT4-fs (mmcblk1p5): mounted filesystem with ordered data mode. Opts: (null)
[ 1.705168] VFS: Mounted root (ext4 filesystem) on device 179:5.
[ 1.706341] devtmpfs: mounted
[ 1.707250] Freeing unused kernel memory: 1152K
[ 1.741805] usb 3-1: new low-speed USB device number 2 using xhci-hcd
[ 1.781078] systemd[1]: System time before build time, advancing clock.
[ 1.787381] systemd[1]: Failed to insert module 'autofs4': No such file or directory
[ 1.799308] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
[ 1.803066] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
Welcome to [1B][1mDebian GNU/Linux 9 (stretch)[1B][0m!
[ 1.840454] random: systemd: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
[ 1.843190] random: systemd-cryptse: uninitialized urandom read (16 bytes read, 34 bits of entropy available)
[ 1.844501] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 35 bits of entropy available)
[ 1.857386] random: systemd-sysv-ge: uninitialized urandom read (16 bytes read, 36 bits of entropy available)
[ 1.857992] vendor storage:20160801 ret = 0
[ 1.862641] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 36 bits of entropy available)
[ 1.863835] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 36 bits of entropy available)
[ 1.864842] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 36 bits of entropy available)
[ 1.866188] random: systemd-gpt-aut: uninitialized urandom read (16 bytes read, 36 bits of entropy available)
[ 1.868317] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 123
[ 1.868802] wifi_platform_bus_enumerate device present 1
[ 1.868806] ======== Card detection to detect SDIO card! ========
[ 1.868810] mmc2:mmc host rescan start!
[ 1.871455] usb 3-1: New USB device found, idVendor=04f2, idProduct=0116
[ 1.872086] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 1.872720] usb 3-1: Product: USB Keyboard
[ 1.873107] usb 3-1: Manufacturer: CHICONY
[ 1.874335] usb 3-1: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 1.875442] mmc2: queuing unknown CIS tuple 0x91 (3 bytes)
[ 1.876051] mmc2: new ultra high speed SDR104 SDIO card at address 0001
[ 1.892938] bcmsdh_register: register client driver
[ 1.893633] bcmsdh_sdmmc_probe: Enter num=1
[ 1.893947] input: CHICONY USB Keyboard as /devices/platform/usb@fe900000/fe900000.dwc3/xhci-hcd.8.auto/usb3/3-1/3-1:1.0/0003:04F2:0116.0001/input/input0
[ 1.895442] bcmsdh_sdmmc_probe: Enter num=2
[ 1.895841] bus num (host idx)=2, slot num (rca)=1
[ 1.896270] found adapter info 'DHD generic adapter'
[ 1.896923] sdioh_attach: set sd_f2_blocksize 256
[ 1.897483] sdioh_attach: sd clock rate = 0
[ 1.899023] F1 signature read @0x18000000=0x17224356
[ 1.906540] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x2 pkg:0x2
[ 1.907813] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[ 1.908534] dhd_conf_set_chiprev: chip=0x4354, chiprev=2
[ 1.909302] CFG80211-ERROR) wl_setup_wiphy : Registering Vendor80211
[ 1.911194] wl_escan_attach: Enter
[ 1.911541] wl_escan_init: Enter
[ 1.912642] wl_create_event_handler(): thread:wl_escan_handler:aa started
[ 1.912654] tsk Enter, tsk = 0xffffffc0769501b0
[ 1.914427] dhd_attach(): thread:dhd_watchdog_thread:ab started
[ 1.916437] dhd_attach(): thread:dhd_dpc:ac started
[ 1.917067] dhd_attach(): thread:dhd_rxf:ad started
[ 1.917510] dhd_deferred_work_init: work queue initialized
[ 1.918069] dhd_bus_set_default_min_res_mask: Unhandled chip id
[ 1.918903] sdioh_cis_read: func_cis_ptr[0]=0x10ac
[ 1.937345] Dongle Host Driver, version 1.579.77.41.2 (r)
[ 1.938811] Register interface [wlan0] MAC: cc:4b:73:27:0a:80
[ 1.938811]
[ 1.940834] dhd_wl_ioctl: returning as busstate=0
[ 1.941286] dhd_dbg_detach_pkt_monitor, 2204
[ 1.941686] dhd_bus_devreset: == Power OFF ==
[ 1.943808] bcmsdh_oob_intr_unregister: Enter
[ 1.944219] bcmsdh_oob_intr_unregister: irq is not registered
[ 1.944783] dhd_txglom_enable: enable 0
[ 1.945149] dhd_conf_set_txglom_params: txglomsize=0, deferred_tx_len=0, bus_txglom=-1
[ 1.945574] hid-generic 0003:04F2:0116.0001: input,hidraw0: USB HID v1.11 Keyboard [CHICONY USB Keyboard] on usb-xhci-hcd.8.auto-1/input0
[ 1.946998] dhd_conf_set_txglom_params: tx_in_rx=1, txinrx_thres=128, dhd_txminmax=-1
[ 1.947709] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=5
[ 1.948315] sdioh_set_mode: set txglom_mode to copy
[ 1.948761] dhd_bus_devreset: WLAN OFF DONE
[ 1.949715] wifi_platform_set_power = 0
[ 1.950141] ======== PULL WL_REG_ON(-1) LOW! ========
[ 1.950600] [WLAN_RFKILL]: rockchip_wifi_power: 0
[ 1.951383] [WLAN_RFKILL]: wifi shut off power.
[ 1.952259] dhd_module_init: Exit err=0
[ 1.977804] usb 6-1: new low-speed USB device number 2 using ohci-platform
[[1B][0;32m OK [1B][0m] Listening on Network Service Netlink Socket.
[[1B][0;1;33mUNSUPP[1B][0m] Starting of EFI System Partition Automount not supported.
[[1B][0;32m OK [1B][0m] Listening on /dev/initctl Compatibility Named Pipe.
[[1B][0;32m OK [1B][0m] Reached target Remote File Systems.
[[1B][0;32m OK [1B][0m] Reached target Swap.
[[1B][0;32m OK [1B][0m] Listening on Journal Socket (/dev/log).
[[1B][0;32m OK [1B][0m] Listening on Journal Socket.
[[1B][0;32m OK [1B][0m] Started Dispatch Password Requests to Console Directory Watch.
[[1B][0;32m OK [1B][0m] Created slice System Slice.
Starting Create Static Device Nodes in /dev...
Starting Set the console keyboard layout...
[[1B][0;32m OK [1B][0m] Created slice system-serial\x2dgetty.slice.
[[1B][0;32m OK [1B][0m] Created slice User and Session Slice.
[[1B][0;32m OK [1B][0m] Started Forward Password Requests to Wall Directory Watch.
[[1B][0;32m OK [1B][0m] Reached target Encrypted Volumes.
[[1B][0;32m OK [1B][0m] Listening on udev Kernel Socket.
Starting Nameserver information manager...
Starting Load Kernel Modules...
Starting Remount Root and Kernel File Systems...
[[1B][0;32m OK [1B][0m] Reached target Slices.
[[1B][0;32m OK [1B][0m] Created slice system-getty.slice.
[[1B][0;32m OK [1B][0m] Listening on udev Control Socket.
[[1B][0;32m OK [1B][0m] Listening on Syslog Socket.
Starting Journal Service...
Mounting Debug File System...
[[1B][0;32m OK [1B][0m] Started Remount Root and Kernel File Systems.
[[1B][0;32m OK [1B][0m] Started Load Kernel Modules.
Mounting FUSE Control File System...
Mounting Configuration File System...
Starting Apply Kernel Variables...
Starting Load/Save Random Seed...
Starting udev Coldplug all Devices...
[[1B][0;32m OK [1B][0m] Mounted Configuration File System.
[[1B][0;32m OK [1B][0m] Mounted FUSE Control File System.
[[1B][0;32m OK [1B][0m] Started Create Static Device Nodes in /dev.
[[1B][0;32m OK [1B][0m] Mounted Debug File System.
[[1B][0;32m OK [1B][0m] Started Nameserver information manager.
[ 2.161896] usb 6-1: New USB device found, idVendor=093a, idProduct=2510
[ 2.162535] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[ 2.163236] usb 6-1: Product: USB Optical Mouse
[ 2.163644] usb 6-1: Manufacturer: PixArt
Starting udev Kernel Device Manager...
[[1B][0;32m OK [1B][0m] Started Apply Kernel Variables.
[[1B][0;32m OK [1B][0m] Started Load/Save Random Seed.
[ 2.174099] input: PixArt USB Optical Mouse as /devices/platform/fe3a0000.usb/usb6/6-1/6-1:1.0/0003:093A:2510.0002/input/input1
[ 2.175660] hid-generic 0003:093A:2510.0002: input,hidraw1: USB HID v1.11 Mouse [PixArt USB Optical Mouse] on usb-fe3a0000.usb-1/input0
[[1B][0;32m OK [1B][0m] Started udev Kernel Device Manager.
Starting Network Service...
[[1B][0;32m OK [1B][0m] Started Network Service.
[[1B][0;32m OK [1B][0m] Started Set the console keyboard layout.
[[1B][0;32m OK [1B][0m] Reached target Local File Systems (Pre).
[[1B][0;32m OK [1B][0m] Reached target Local File Systems.
Starting Raise network interfaces...
Starting Set console font and keymap...
[[1B][0;32m OK [1B][0m] Started Set console font and keymap.
[[1B][0;32m OK [1B][0m] Started Journal Service.
Starting Flush Journal to Persistent Storage...
[[1B][0;32m OK [1B][0m] Started udev Coldplug all Devices.
[ 2.397217] systemd-journald[193]: Received request to flush runtime journal from PID 1
[[1B][0;32m OK [1B][0m] Started Flush Journal to Persistent Storage.
Starting Create Volatile Files and Directories...
[[1B][0;32m OK [1B][0m] Started Create Volatile Files and Directories.
Starting Update UTMP about System Boot/Shutdown...
Starting Network Time Synchronization...
[[1B][0;32m OK [1B][0m] Started Update UTMP about System Boot/Shutdown.
[[1B][0;32m OK [1B][0m] Started Network Time Synchronization.
[[1B][0;32m OK [1B][0m] Reached target System Initialization.
[[1B][0;32m OK [1B][0m] Listening on OpenBSD Secure Shell server socket.
[[1B][0;32m OK [1B][0m] Listening on ACPID Listen Socket.
[[1B][0;32m OK [1B][0m] Started Daily Cleanup of Temporary Directories.
[[1B][0;32m OK [1B][0m] Listening on D-Bus System Message Bus Socket.
[[1B][0;32m OK [1B][0m] Started ACPI Events Check.
[[1B][0;32m OK [1B][0m] Reached target Paths.
Starting Docker Socket for the API.
[[1B][0;32m OK [1B][0m] Reached target System Time Synchronized.
[[1B][0;32m OK [1B][0m] Started Trigger anacron every hour.
[[1B][0;32m OK [1B][0m] Started Daily apt download activities.
[[1B][0;32m OK [1B][0m] Started Daily apt upgrade and clean activities.
[[1B][0;32m OK [1B][0m] Reached target Timers.
[[1B][0;32m OK [1B][0m] Listening on Docker Socket for the API.
[[1B][0;32m OK [1B][0m] Reached target Sockets.
[[1B][0;32m OK [1B][0m] Reached target Basic System.
Starting Disk Manager...
[[1B][0;32m OK [1B][0m] Started ACPI event daemon.
[[1B][0;32m OK [1B][0m] Started Run anacron jobs.
Starting System Logging Service...
Starting Login Service...
Starting Provide limited super user privileges to specific users...
Starting Save/Restore Sound Card State...
[[1B][0;32m OK [1B][0m] Started Setup rockchip platform environment.
Starting Daemon for power management...
Starting LSB: Load kernel modules needed to enable cpufreq scaling...
[[1B][0;32m OK [1B][0m] Started D-Bus System Message Bus.
Starting WPA supplicant...
Starting Network Manager...
[[1B][0;32m OK [1B][0m] Started System Logging Service.
[[1B][0;32m OK [1B][0m] Started Provide limited super user privileges to specific users.
[[1B][0;32m OK [1B][0m] Started Save/Restore Sound Card State.
[[1B][0;32m OK [1B][0m] Found device /dev/ttyFIQ0.
[[1B][0;32m OK [1B][0m] Started WPA supplicant.
[[1B][0;32m OK [1B][0m] Started Login Service.
Starting Authorization Manager...
[[1B][0;32m OK [1B][0m] Reached target Sound Card.
[[1B][0;32m OK [1B][0m] Started LSB: Load kernel modules needed to enable cpufreq scaling.
Starting LSB: set CPUFreq kernel parameters...
[[1B][0;32m OK [1B][0m] Started Raise network interfaces.
[[1B][0;32m OK [1B][0m] Listening on Load/Save RF Kill Switch Status /dev/rfkill Watch.
Starting Load/Save RF Kill Switch Status...
[[1B][0;32m OK [1B][0m] Started Authorization Manager.
[ 2.859939] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin output high!
[ 2.901913] [BT_RFKILL]: ENABLE UART_RTS
[[1B][0;32m OK [1B][0m] Started LSB: set CPUFreq kernel parameters.
[[1B][0;32m OK [1B][0m] Started Disk Manager.
[[1B][0;32m OK [1B][0m] Started Daemon for power management.
[ 3.002822] [BT_RFKILL]: DISABLE UART_RTS
[ 3.003245] [BT_RFKILL]: bt turn on power
[[1B][0;32m OK [1B][0m] Started Load/Save RF Kill Switch Status.
[[1B][0;32m OK [1B][0m] Started Network Manager.
[[1B][0;32m OK [1B][0m] Reached target Network.
Starting Network Name Resolution...
Starting Permit User Sessions...
[[1B][0;32m OK [1B][0m] Reached target Network is Online.
Starting LSB: Advanced IEEE 802.11 management daemon...
Starting containerd container runtime...
Starting /etc/rc.local Compatibility...
[[1B][0;32m OK [1B][0m] Started containerd container runtime.
[ 2.961520] rc.local[595]: /etc/rc.local: 13: /etc/rc.local: rk_wifi_init: not found
[[1B][0;32m OK [1B][0m] Started LSB: Advanced IEEE 802.11 management daemon.
[[1B][0;32m OK [1B][0m] Started Permit User Sessions.
[[1B][0;1;31mFAILED[1B][0m] Failed to start /etc/rc.local Compatibility.
See 'systemctl status rc-local.service' for details.
Starting Light Display Manager...
[[1B][0;32m OK [1B][0m] Started Getty on tty1.
[[1B][0;32m OK [1B][0m] Started Serial Getty on ttyFIQ0.
[[1B][0;32m OK [1B][0m] Reached target Login Prompts.
Starting Docker Application Container Engine...
Starting Network Manager Script Dispatcher Service...
[[1B][0;32m OK [1B][0m] Started Network Manager Script Dispatcher Service.
[[1B][0;32m OK [1B][0m] Started Light Display Manager.
Starting Hostname Service...
[[1B][0;32m OK [1B][0m] Started Network Name Resolution.
[[1B][0;32m OK [1B][0m] Started Hostname Service.
[ 3.382186] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 3.382906] dhd_open: Enter ffffffc0002ff000
[ 3.383288]
[ 3.383288] Dongle Host Driver, version 1.579.77.41.2 (r)
[ 3.383907] wl_android_wifi_on in 1
[ 3.384216] wl_android_wifi_on in 2: g_wifi_on=0
[ 3.384628] wifi_platform_set_power = 1
[ 3.384986] ======== PULL WL_REG_ON(-1) HIGH! ========
[ 3.385444] [WLAN_RFKILL]: rockchip_wifi_power: 1
[ 3.385871] [WLAN_RFKILL]: wifi turn on power. -1
[ 3.673404] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property
[ 3.674251] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property
[ 3.675441] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property
[ 3.676411] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property
[ 3.677338] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property
[ 3.678267] [drm:dw_hdmi_rockchip_set_property] *ERROR* failed to set rockchip hdmi connector property
[ 3.686845] sdio_reset_comm():
[ 3.701831] mmc_host mmc2: Bus speed (slot 0) = 400000Hz (slot req 400000Hz, actual 400000HZ div = 0)
[ 3.718988] mmc_host mmc2: Bus speed (slot 0) = 200000Hz (slot req 200000Hz, actual 200000HZ div = 0)
[ 3.743832] random: nonblocking pool is initialized
[ 3.767983] mmc2: queuing unknown CIS tuple 0x80 (2 bytes)
[ 3.771744] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.775564] mmc2: queuing unknown CIS tuple 0x80 (3 bytes)
[ 3.781844] mmc2: queuing unknown CIS tuple 0x80 (7 bytes)
[ 3.895684] mmc_host mmc2: Bus speed (slot 0) = 100000000Hz (slot req 100000000Hz, actual 100000000HZ div = 0)
[ 4.090699] dwmmc_rockchip fe310000.dwmmc: Successfully tuned phase to 123
[ 4.091475] sdioh_start: set sd_f2_blocksize 256
[ 4.092723]
[ 4.092723]
[ 4.092723] dhd_bus_devreset: == WLAN ON ==
[ 4.093958] F1 signature read @0x18000000=0x17224356
[ 4.099923] F1 signature OK, socitype:0x1 chip:0x4354 rev:0x2 pkg:0x2
[ 4.101698] DHD: dongle ram size is set to 786432(orig 786432) at 0x180000
[ 4.102447] dhd_bus_set_default_min_res_mask: Unhandled chip id
[ 4.105928] dhd_conf_read_config: Ignore config file /system/etc/firmware/config.txt
[ 4.106625] Final fw_path=/system/etc/firmware/fw_bcm4356a2_ag.bin
[ 4.107260] Final nv_path=/system/etc/firmware/nvram_ap6356.txt
[ 4.107806] Final clm_path=/system/etc/firmware/clm_bcmdhd.blob
[ 4.108324] Final conf_path=/system/etc/firmware/config.txt
[ 4.108855] dhd_set_bus_params: set use_rxchain 0
[ 4.109268] dhd_set_bus_params: set txinrx_thres 128
[ 4.109702] dhd_set_bus_params: set txglomsize 36
[ 4.111906] dhd_os_open_image: /system/etc/firmware/fw_bcm4356a2_ag.bin (558327 bytes) open success
[ 4.170163] dhd_os_open_image: /system/etc/firmware/nvram_ap6356.txt (2840 bytes) open success
[ 4.171300] NVRAM version: AP6356S_NVRAM_V1.2_20170331
[ 4.173193] dhdsdio_write_vars: Download, Upload and compare of NVRAM succeeded.
[ 4.230032] dhd_bus_init: enable 0x06, ready 0x06 (waited 0us)
[ 4.231880] bcmsdh_oob_intr_register HW_OOB irq=71 flags=0x4
[ 4.232644] dhd_get_memdump_info: File [/data/misc/wifi/.memdump.info] doesn't exist
[ 4.233405] dhd_get_memdump_info: MEMDUMP ENABLED = 2
[ 4.235447] Disable tdls_auto_op failed. -1
[ 4.235857] dhd_preinit_ioctls: Set tcpack_sup_mode 1
[ 4.236906] dhd_apply_default_clm: Ignore clm file /system/etc/firmware/clm_bcmdhd.blob
[[1B][0;1;31mFAILED[1B][0m] Failed to start Docker Application Container Engine.
See 'systemctl status docker.service' for details.
[ 4.239374] Firmware up: op_mode=0x0005, MAC=cc:4b:73:27:0a:80
[ 4.239997] dhd_conf_set_country: set country CN, revision 38
[[1B][0;32m OK [1B][0m] Reached target Multi-User System.
[[1B][0;32m OK [1B][0m] Reached target Graphical Interface.
Starting Update UTMP about System Runlevel Changes...
[[1B][0;32m OK [1B][0m] Created slice User Slice of linaro.
Starting User Manager for UID 1000...
[[1B][0;32m OK [1B][0m] Started Session c1 of user linaro.
[[1B][0;32m OK [1B][0m] Started Update UTMP about System Runlevel Changes.
[ 4.277560] dhd_wlfc_enable: ret=0
[ 4.277909] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created
[ 4.278544] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created
[ 4.280040] Country code: CN (CN/38)
[ 4.280812] dhd_conf_set_intiovar: set roam_off 1
[ 4.284154] dhd_conf_set_intiovar: set txbf 1
[ 4.285552] dhd_preinit_ioctls Set scancache failed -23
[ 4.286290] dhd_conf_set_intiovar: set WLC_SET_FAKEFRAG 219 1
[ 4.294655] Driver: 1.579.77.41.2 (r)
[ 4.294655] Firmware: wl0: Apr 18 2017 13:54:43 version 7.35.184.1.r5 (A2 Station/P2P) FWID 01-efd4ca0d
[ 4.294655] CLM: 7.10.16
[ 4.296390] dhd_txglom_enable: enable 1
[ 4.296738] dhd_conf_set_txglom_params: txglomsize=36, deferred_tx_len=36, bus_txglom=-1
[ 4.297476] dhd_conf_set_txglom_params: tx_in_rx=1, txinrx_thres=128, dhd_txminmax=-1
[ 4.298169] dhd_conf_set_txglom_params: tx_max_offset=0, txctl_tmo_fix=5
[ 4.298772] sdioh_set_mode: set txglom_mode to copy
[ 4.299213] dhd_conf_get_disable_proptx: fw_proptx=1, disable_proptx=-1
[ 4.303243] dhd_wlfc_hostreorder_init(): successful bdcv2 tlv signaling, 64
[ 4.304137] dhd_conf_set_intiovar: set ampdu_hostreorder 1
[ 4.305947] dhd_pno_init: Support Android Location Service
[[1B][0;32m OK [1B][0m] Started User Manager for UID 1000.
[ 4.314257] tty_port_close_start: tty->count = 1 port count = 2.
Debian GNU/Linux 9 linaro-alip ttyFIQ0
linaro-alip login: root (automatic login)
[ 4.341327] CFG80211-ERROR) wl_cfg80211_event : Event handler is not created
[ 4.342220] rtt_do_get_ioctl: failed to send getbuf proxd iovar (CMD ID : 1), status=-23
[ 4.342968] dhd_rtt_init : FTM is not supported
[ 4.343380] dhd_preinit_ioctls: SensorHub diabled 0
[ 4.344432] dhd_preinit_ioctls failed to set ShubHub disable
[ 4.345452] dhd_ndo_get_version: failed, retcode = -23
[ 4.346489] dhd_wl_ioctl_get_intiovar: get int iovar wnm_bsstrans_resp failed, ERR -23
[ 4.347212] failed to get wnm_bsstrans_resp
Last login: Mon Apr 1 22:25:41 UTC 2019 on ttyFIQ0
[ 4.348318] failed to set WNM capabilities
[ 4.348693] wl_android_wifi_on: Success
Linux linaro-alip 4.4.103 #1 SMP Mon Apr 1 19:12:43 UTC 2019 aarch64
The programs included with the Debian GNU/Linux system are free software;
the exact distribution terms for each program are described in the
individual files in /usr/share/doc/*/copyright.
Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent
permitted by applicable law.
[ 4.378070] dhd_open: Exit ret=0
[ 4.436201] cfg80211: World regulatory domain updated:
[ 4.436671] cfg80211: DFS Master region: unset
[ 4.437098] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp), (dfs_cac_time)
[ 4.437983] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.438692] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz, 92000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.439539] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.440269] cfg80211: (5170000 KHz - 5250000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (N/A)
[ 4.441132] cfg80211: (5250000 KHz - 5330000 KHz @ 80000 KHz, 160000 KHz AUTO), (N/A, 2000 mBm), (0 s)
[ 4.441997] cfg80211: (5490000 KHz - 5730000 KHz @ 160000 KHz), (N/A, 2000 mBm), (0 s)
[ 4.442706] cfg80211: (5735000 KHz - 5835000 KHz @ 80000 KHz), (N/A, 2000 mBm), (N/A)
[ 4.443446] cfg80211: (57240000 KHz - 63720000 KHz @ 2160000 KHz), (N/A, 0 mBm), (N/A)
[ 4.481826] P2P interface registered
[ 4.482158] wl_cfgp2p_add_p2p_disc_if: wdev: ffffffc076a09400, wdev->net: (null)
[ 4.493877] WLC_E_IF: NO_IF set, event Ignored
[ 4.495428] P2P interface started
root@linaro-alip:~# [ 5.368136] dwhdmi-rockchip ff940000.hdmi: Rate 0 missing; compute N dynamically
[ 5.393442] dwhdmi-rockchip ff940000.hdmi: Rate 0 missing; compute N dynamically
[ 8.511323] [BT_RFKILL]: rfkill_rk_set_power: set bt wake_host pin output high!
[ 8.553929] [BT_RFKILL]: ENABLE UART_RTS
[ 8.655068] [BT_RFKILL]: DISABLE UART_RTS
[ 8.655530] [BT_RFKILL]: bt turn on power
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment