jzerbe/usbmount.conf

## usbmount.conf
# Configuration file for the usbmount package, which mounts removable
# storage devices when they are plugged in and unmounts them when they
# are removed.

# Change to zero to disable usbmount
ENABLED=1

# Mountpoints: These directories are eligible as mointpoints for
# removable storage devices.  A newly plugged in device is mounted on
# the first directory in this list that exists and on which nothing is
# mounted yet.
MOUNTPOINTS="/media/usb0 /media/usb1 /media/usb2 /media/usb3
             /media/usb4 /media/usb5 /media/usb6 /media/usb7"

# Filesystem types: removable storage devices are only mounted if they
# contain a filesystem type which is in this list.
FILESYSTEMS="vfat ext2 ext3 ext4 hfsplus ntfs fuseblk"

#############################################################################
# WARNING!                                                                  #
#                                                                           #
# The "sync" option may not be a good choice to use with flash drives, as   #
# it forces a greater amount of writing operating on the drive. This makes  #
# the writing speed considerably lower and also leads to a faster wear out  #
# of the disk.                                                              #
#                                                                           #
# If you omit it, don't forget to use the command "sync" to synchronize the #
# data on your disk before removing the drive or you may experience data    #
# loss.                                                                     #
#                                                                           #
# It is highly recommended that you use the pumount command (as a regular   #
# user) before unplugging the device. It makes calling the "sync" command   #
# and mounting with the sync option unnecessary---this is similar to other  #
# operating system's "safely disconnect the device" option.                 #
#############################################################################
# Mount options: Options passed to the mount command with the -o flag.
# See the warning above regarding removing "sync" from the options.
MOUNTOPTIONS="sync,noexec,nodev,noatime,nodiratime,gid=plugdev,umask=0000"

# Filesystem type specific mount options: This variable contains a space
# separated list of strings, each which the form "-fstype=TYPE,OPTIONS".
#
# If a filesystem with a type listed here is mounted, the corresponding
# options are appended to those specificed in the MOUNTOPTIONS variable.
#
# For example, "-fstype=vfat,gid=floppy,dmask=0007,fmask=0117" would add
# the options "gid=floppy,dmask=0007,fmask=0117" when a vfat filesystem
# is mounted.
FS_MOUNTOPTIONS=""

# If set to "yes", more information will be logged via the syslog
# facility.
VERBOSE=no
	# Configuration file for the usbmount package, which mounts removable
	# storage devices when they are plugged in and unmounts them when they
	# are removed.

	# Change to zero to disable usbmount
	ENABLED=1

	# Mountpoints: These directories are eligible as mointpoints for
	# removable storage devices. A newly plugged in device is mounted on
	# the first directory in this list that exists and on which nothing is
	# mounted yet.
	MOUNTPOINTS="/media/usb0 /media/usb1 /media/usb2 /media/usb3
	/media/usb4 /media/usb5 /media/usb6 /media/usb7"

	# Filesystem types: removable storage devices are only mounted if they
	# contain a filesystem type which is in this list.
	FILESYSTEMS="vfat ext2 ext3 ext4 hfsplus ntfs fuseblk"

	#############################################################################
	# WARNING! #
	# #
	# The "sync" option may not be a good choice to use with flash drives, as #
	# it forces a greater amount of writing operating on the drive. This makes #
	# the writing speed considerably lower and also leads to a faster wear out #
	# of the disk. #
	# #
	# If you omit it, don't forget to use the command "sync" to synchronize the #
	# data on your disk before removing the drive or you may experience data #
	# loss. #
	# #
	# It is highly recommended that you use the pumount command (as a regular #
	# user) before unplugging the device. It makes calling the "sync" command #
	# and mounting with the sync option unnecessary---this is similar to other #
	# operating system's "safely disconnect the device" option. #
	#############################################################################
	# Mount options: Options passed to the mount command with the -o flag.
	# See the warning above regarding removing "sync" from the options.
	MOUNTOPTIONS="sync,noexec,nodev,noatime,nodiratime,gid=plugdev,umask=0000"

	# Filesystem type specific mount options: This variable contains a space
	# separated list of strings, each which the form "-fstype=TYPE,OPTIONS".
	#
	# If a filesystem with a type listed here is mounted, the corresponding
	# options are appended to those specificed in the MOUNTOPTIONS variable.
	#
	# For example, "-fstype=vfat,gid=floppy,dmask=0007,fmask=0117" would add
	# the options "gid=floppy,dmask=0007,fmask=0117" when a vfat filesystem
	# is mounted.
	FS_MOUNTOPTIONS=""

	# If set to "yes", more information will be logged via the syslog
	# facility.
	VERBOSE=no