Created
March 28, 2014 04:29
-
-
Save kamilion/9825450 to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "09abaf1f-8fc1-4f46-943d-425e8fbd092d" , | |
"device_name": "sdy" , | |
"device_node": "/dev/sdy" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E18G4263CNRA7D" | |
} , | |
"host_information": { | |
"boot_id": "09abaf1f-8fc1-4f46-943d-425e8fbd092d" , | |
"device_name": "sdy" , | |
"device_node": "/dev/sdy" , | |
"host_ip": "10.0.5.50" , | |
"last_boot_id": "09abaf1f-8fc1-4f46-943d-425e8fbd092d" , | |
"last_host_ip": "10.0.5.50" , | |
"last_known_as": "/dev/sdy" , | |
"last_machine_id": "300a76492cf73e527d61b3e849efde1b" , | |
"machine_id": "300a76492cf73e527d61b3e849efde1b" | |
} , | |
"host_ip": "10.0.5.50" , | |
"id": "04d7c2ff-c2d3-410a-878f-d2577f63c55f" , | |
"lifetime": 68400 , | |
"machine_id": "300a76492cf73e527d61b3e849efde1b" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E18G4263CNRA7D" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E18G4263CNRA7D | |
LU WWN Device Id: 5 000cca 6d4c96b3f | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 16:46:51 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 22 Celsius | |
Power Cycle Min/Max Temperature: 19/22 Celsius | |
Lifetime Min/Max Temperature: 19/45 Celsius | |
Lifetime Average Temperature: 38 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (27) | |
Error SMART WRITE LOG does not return COUNT and LBA_LOW register | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
28 2014-03-26 14:39 43 ************************ | |
29 2014-03-26 14:40 43 ************************ | |
30 2014-03-26 14:41 43 ************************ | |
31 2014-03-26 14:42 39 ******************** | |
32 2014-03-26 14:43 35 **************** | |
33 2014-03-26 14:44 33 ************** | |
34 2014-03-26 14:45 32 ************* | |
35 2014-03-26 14:46 31 ************ | |
36 2014-03-26 14:47 30 *********** | |
37 2014-03-26 14:48 30 *********** | |
38 2014-03-26 14:49 31 ************ | |
... ..( 3 skipped). .. ************ | |
42 2014-03-26 14:53 31 ************ | |
43 2014-03-26 14:54 32 ************* | |
... ..( 3 skipped). .. ************* | |
47 2014-03-26 14:58 32 ************* | |
48 2014-03-26 14:59 ? - | |
49 2014-03-26 15:00 26 ******* | |
50 2014-03-26 15:01 26 ******* | |
51 2014-03-26 15:02 27 ******** | |
52 2014-03-26 15:03 27 ******** | |
53 2014-03-26 15:04 ? - | |
54 2014-03-26 15:05 28 ********* | |
55 2014-03-26 15:06 28 ********* | |
56 2014-03-26 15:07 29 ********** | |
57 2014-03-26 15:08 29 ********** | |
58 2014-03-26 15:09 30 *********** | |
59 2014-03-26 15:10 30 *********** | |
60 2014-03-26 15:11 30 *********** | |
61 2014-03-26 15:12 31 ************ | |
... ..( 7 skipped). .. ************ | |
69 2014-03-26 15:20 31 ************ | |
70 2014-03-26 15:21 32 ************* | |
71 2014-03-26 15:22 32 ************* | |
72 2014-03-26 15:23 31 ************ | |
73 2014-03-26 15:24 31 ************ | |
74 2014-03-26 15:25 ? - | |
75 2014-03-26 15:26 31 ************ | |
76 2014-03-26 15:27 31 ************ | |
77 2014-03-26 15:28 31 ************ | |
78 2014-03-26 15:29 ? - | |
79 2014-03-26 15:30 30 *********** | |
80 2014-03-26 15:31 30 *********** | |
81 2014-03-26 15:32 30 *********** | |
82 2014-03-26 15:33 31 ************ | |
83 2014-03-26 15:34 ? - | |
84 2014-03-26 15:35 24 ***** | |
85 2014-03-26 15:36 25 ****** | |
86 2014-03-26 15:37 26 ******* | |
87 2014-03-26 15:38 ? - | |
88 2014-03-26 15:39 26 ******* | |
89 2014-03-26 15:40 27 ******** | |
90 2014-03-26 15:41 27 ******** | |
91 2014-03-26 15:42 27 ******** | |
92 2014-03-26 15:43 ? - | |
93 2014-03-26 15:44 27 ******** | |
94 2014-03-26 15:45 28 ********* | |
95 2014-03-26 15:46 28 ********* | |
96 2014-03-26 15:47 29 ********** | |
... ..( 3 skipped). .. ********** | |
100 2014-03-26 15:51 29 ********** | |
101 2014-03-26 15:52 30 *********** | |
... ..( 3 skipped). .. *********** | |
105 2014-03-26 15:56 30 *********** | |
106 2014-03-26 15:57 ? - | |
107 2014-03-26 15:58 29 ********** | |
108 2014-03-26 15:59 29 ********** | |
109 2014-03-26 16:00 30 *********** | |
110 2014-03-26 16:01 ? - | |
111 2014-03-26 16:02 29 ********** | |
112 2014-03-26 16:03 29 ********** | |
113 2014-03-26 16:04 29 ********** | |
114 2014-03-26 16:05 ? - | |
115 2014-03-26 16:06 24 ***** | |
116 2014-03-26 16:07 25 ****** | |
117 2014-03-26 16:08 26 ******* | |
118 2014-03-26 16:09 ? - | |
119 2014-03-26 16:10 27 ******** | |
120 2014-03-26 16:11 28 ********* | |
121 2014-03-26 16:12 28 ********* | |
122 2014-03-26 16:13 28 ********* | |
123 2014-03-26 16:14 ? - | |
124 2014-03-26 16:15 28 ********* | |
125 2014-03-26 16:16 29 ********** | |
126 2014-03-26 16:17 30 *********** | |
... ..( 2 skipped). .. *********** | |
1 2014-03-26 16:20 30 *********** | |
2 2014-03-26 16:21 31 ************ | |
... ..( 3 skipped). .. ************ | |
6 2014-03-26 16:25 31 ************ | |
7 2014-03-26 16:26 32 ************* | |
... ..( 6 skipped). .. ************* | |
14 2014-03-26 16:33 32 ************* | |
15 2014-03-26 16:34 ? - | |
16 2014-03-26 16:35 31 ************ | |
17 2014-03-26 16:36 31 ************ | |
18 2014-03-26 16:37 31 ************ | |
19 2014-03-26 16:38 ? - | |
20 2014-03-26 16:39 31 ************ | |
21 2014-03-26 16:40 31 ************ | |
22 2014-03-26 16:41 31 ************ | |
23 2014-03-26 16:42 ? - | |
24 2014-03-26 16:43 20 * | |
25 2014-03-26 16:44 21 ** | |
26 2014-03-26 16:45 21 ** | |
27 2014-03-26 16:46 22 *** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 233 233 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 27 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 19 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 25 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 23 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 1298 | |
194 Temperature_Celsius -O---- 253 253 000 - 22 (Min/Max 19/45) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 62) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "1298" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "25" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "23" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "19" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "233" , | |
"worst": "233" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "27" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "22" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"device_name": "sdc" , | |
"device_node": "/dev/sdc" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "160,041,885,696 bytes [160 GB]" , | |
"model": "INTEL SSDSA2CW160G3" , | |
"model_family": "Intel 320 Series SSDs" , | |
"phy_protocol": "SATA" , | |
"serial_no": "BTPR228101BL160DGN" | |
} , | |
"host_information": { | |
"boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"device_name": "sdc" , | |
"device_node": "/dev/sdc" , | |
"host_ip": "10.0.5.45" , | |
"last_boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"last_host_ip": "10.0.5.45" , | |
"last_known_as": "/dev/sdc" , | |
"last_machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" | |
} , | |
"host_ip": "10.0.5.45" , | |
"id": "0da0df4d-7067-4e1d-a727-04b0112a8d51" , | |
"lifetime": 31428000 , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"model": "INTEL SSDSA2CW160G3" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "BTPR228101BL160DGN" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Model Family: Intel 320 Series SSDs | |
Device Model: INTEL SSDSA2CW160G3 | |
Serial Number: BTPR228101BL160DGN | |
LU WWN Device Id: 5 001517 972e8615b | |
Firmware Version: 4PC10362 | |
User Capacity: 160,041,885,696 bytes [160 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 4 | |
Local Time is: Thu Mar 27 21:30:25 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
GP/S Log at address 0x01 has 1 sectors [Summary SMART error log] | |
GP/S Log at address 0x02 has 8 sectors [Comprehensive SMART error log] | |
GP/S Log at address 0x03 has 8 sectors [Ext. Comprehensive SMART error log] | |
GP/S Log at address 0x04 has 8 sectors [Device Statistics log] | |
GP/S Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP/S Log at address 0x07 has 1 sectors [Extended self-test log] | |
GP/S Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP/S Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP/S Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 4 0 Command failed due to ICRC error | |
0x0004 4 0 R_ERR response for host-to-device data FIS | |
0x0007 4 0 R_ERR response for host-to-device non-data FIS | |
0x0008 4 0 Device-to-host non-data FIS retries | |
0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 4 0 CRC errors within host-to-device FIS | |
0x000d 4 0 Non-CRC errors within host-to-device FIS | |
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC | |
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC | |
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (8 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
Invalid Self-test Log index = 0x0043 (reserved = 0x00) | |
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 0 | |
Note: revision number not 1 implies that no selective self-test has ever been run | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "Error Read SCT Data Table failed: scsi error aborted command | |
Error Write SCT (Get) Error Recovery Control Command failed: scsi error unsupported scsi opcode | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
3 Spin_Up_Time -----K 100 100 000 - 0 | |
4 Start_Stop_Count ----CK 100 100 000 - 0 | |
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 | |
9 Power_On_Hours -O--CK 100 100 000 - 8730 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 36 | |
170 Reserve_Block_Count PO--CK 100 100 010 - 0 | |
171 Program_Fail_Count -O--CK 100 100 000 - 0 | |
172 Erase_Fail_Count -O--CK 100 100 000 - 0 | |
183 Runtime_Bad_Block ----CK 100 100 000 - 12 | |
184 End-to-End_Error -O--CK 100 100 090 - 0 | |
187 Reported_Uncorrect -O--CK 100 100 000 - 0 | |
192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 35 | |
199 UDMA_CRC_Error_Count ----CK 100 100 000 - 3 | |
225 Host_Writes_32MiB -O--CK 100 100 000 - 428349 | |
226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 1775 | |
227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 35 | |
228 Workload_Minutes -O--CK 100 100 000 - 2625082 | |
232 Available_Reservd_Space PO--CK 100 100 010 - 0 | |
233 Media_Wearout_Indicator -O--CK 099 099 000 - 0 | |
241 Host_Writes_32MiB -O--CK 100 100 000 - 428349 | |
242 Host_Reads_32MiB -O--CK 100 100 000 - 419508 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 1) seconds. | |
Offline data collection | |
capabilities: (0x75) SMART execute Offline immediate. | |
No Auto Offline data collection support. | |
Abort Offline collection upon new | |
command. | |
No Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 1) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 1) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 5 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Available_Reservd_Space": { | |
"attr_name": "Available_Reservd_Space" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "232" , | |
"threshold": "010" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"End_to_End_Error": { | |
"attr_name": "End-to-End_Error" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "184" , | |
"threshold": "090" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Erase_Fail_Count": { | |
"attr_name": "Erase_Fail_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "172" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Host_Reads_32MiB": { | |
"attr_name": "Host_Reads_32MiB" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "419508" , | |
"smart_id": "242" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Host_Writes_32MiB": { | |
"attr_name": "Host_Writes_32MiB" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "428349" , | |
"smart_id": "241" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Media_Wearout_Indicator": { | |
"attr_name": "Media_Wearout_Indicator" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "233" , | |
"threshold": "000" , | |
"value": "099" , | |
"worst": "099" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "36" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "8730" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Program_Fail_Count": { | |
"attr_name": "Program_Fail_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "171" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reported_Uncorrect": { | |
"attr_name": "Reported_Uncorrect" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "187" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reserve_Block_Count": { | |
"attr_name": "Reserve_Block_Count" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "170" , | |
"threshold": "010" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Runtime_Bad_Block": { | |
"attr_name": "Runtime_Bad_Block" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "12" , | |
"smart_id": "183" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "-----K" , | |
"raw_value": "0" , | |
"smart_id": "3" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "0" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "3" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Unsafe_Shutdown_Count": { | |
"attr_name": "Unsafe_Shutdown_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "35" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Workld_Host_Reads_Perc": { | |
"attr_name": "Workld_Host_Reads_Perc" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "35" , | |
"smart_id": "227" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Workld_Media_Wear_Indic": { | |
"attr_name": "Workld_Media_Wear_Indic" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "1775" , | |
"smart_id": "226" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Workload_Minutes": { | |
"attr_name": "Workload_Minutes" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "2625082" , | |
"smart_id": "228" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "6998a826-f64b-4595-bafa-537267d98003" , | |
"device_name": "sdn" , | |
"device_node": "/dev/sdn" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "251,059,544,064 bytes [251 GB]" , | |
"model": "WDC WD2502ABYS-01B7A0" , | |
"model_family": "Western Digital RE3 Serial ATA" , | |
"phy_protocol": "SATA" , | |
"serial_no": "WD-WCAT14257350" | |
} , | |
"host_information": { | |
"boot_id": "6998a826-f64b-4595-bafa-537267d98003" , | |
"device_name": "sdn" , | |
"device_node": "/dev/sdn" , | |
"host_ip": "10.0.5.42" , | |
"last_boot_id": "6998a826-f64b-4595-bafa-537267d98003" , | |
"last_host_ip": "10.0.5.42" , | |
"last_known_as": "/dev/sdn" , | |
"last_machine_id": "2b4201c14cb4987011fd320c48f3e189" , | |
"machine_id": "2b4201c14cb4987011fd320c48f3e189" | |
} , | |
"host_ip": "10.0.5.42" , | |
"id": "12eff898-64a4-41f4-a451-e2fa52a541b3" , | |
"lifetime": 31827600 , | |
"machine_id": "2b4201c14cb4987011fd320c48f3e189" , | |
"model": "WDC WD2502ABYS-01B7A0" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "WD-WCAT14257350" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Model Family: Western Digital RE3 Serial ATA | |
Device Model: WDC WD2502ABYS-01B7A0 | |
Serial Number: WD-WCAT14257350 | |
LU WWN Device Id: 5 0014ee 1abf4ff0f | |
Firmware Version: 02.03B02 | |
User Capacity: 251,059,544,064 bytes [251 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: 8 | |
ATA Standard is: Exact ATA specification draft version not indicated | |
Local Time is: Wed Mar 26 20:34:24 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM level is: 254 (maximum performance), recommended: 128 | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log] | |
GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log] | |
GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log] | |
GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log] | |
GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log] | |
GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log] | |
GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log] | |
GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log] | |
GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xaa has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xab has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xac has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xad has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xae has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xaf has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log] | |
GP Log at address 0xc1 has 24 sectors [Device vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET | |
0x8000 4 1206342 Vendor specific | |
" , | |
"sata_sct": "SCT Status Version: 2 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: SMART Off-line Data Collection executing in background (4) | |
Current Temperature: 28 Celsius | |
Power Cycle Min/Max Temperature: 26/30 Celsius | |
Lifetime Min/Max Temperature: 19/55 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (474) | |
Error SMART WRITE LOG does not return COUNT and LBA_LOW register | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
475 2014-03-26 12:37 27 ******** | |
... ..(376 skipped). .. ******** | |
374 2014-03-26 18:54 27 ******** | |
375 2014-03-26 18:55 28 ********* | |
... ..( 21 skipped). .. ********* | |
397 2014-03-26 19:17 28 ********* | |
398 2014-03-26 19:18 27 ******** | |
... ..( 75 skipped). .. ******** | |
474 2014-03-26 20:34 27 ******** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Extended offline Completed without error 00% 7812 - | |
# 2 Short offline Completed without error 00% 7605 - | |
# 3 Short offline Completed without error 00% 7599 - | |
# 4 Short offline Completed without error 00% 7593 - | |
# 5 Short offline Completed without error 00% 7587 - | |
# 6 Short offline Completed without error 00% 7581 - | |
# 7 Short offline Completed without error 00% 7575 - | |
# 8 Short offline Completed without error 00% 7569 - | |
# 9 Short offline Completed without error 00% 7563 - | |
#10 Short offline Completed without error 00% 7557 - | |
#11 Short offline Completed without error 00% 7551 - | |
#12 Short offline Completed without error 00% 7545 - | |
#13 Short offline Completed without error 00% 7539 - | |
#14 Short offline Completed without error 00% 7533 - | |
#15 Short offline Completed without error 00% 7527 - | |
#16 Short offline Completed without error 00% 7521 - | |
#17 Short offline Completed without error 00% 7515 - | |
#18 Short offline Completed without error 00% 7509 - | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 0 | |
3 Spin_Up_Time POS--K 158 157 021 - 3075 | |
4 Start_Stop_Count -O--CK 100 100 000 - 53 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 088 088 000 - 8841 | |
10 Spin_Retry_Count -O--CK 100 253 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 253 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 48 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 44 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 53 | |
194 Temperature_Celsius -O---K 115 088 000 - 28 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 200 200 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x84) Offline data collection activity | |
was suspended by an interrupting command from host. | |
Auto Offline Data Collection: Enabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 4800) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 59) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x303f) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Calibration_Retry_Count": { | |
"attr_name": "Calibration_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "11" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "253" | |
} , | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "53" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Multi_Zone_Error_Rate": { | |
"attr_name": "Multi_Zone_Error_Rate" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "200" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "48" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "44" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "8841" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "088" , | |
"worst": "088" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "POSR-K" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "051" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "140" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "-OSR-K" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "253" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS--K" , | |
"raw_value": "3075" , | |
"smart_id": "3" , | |
"threshold": "021" , | |
"value": "158" , | |
"worst": "157" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "53" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "28" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "115" , | |
"worst": "088" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"device_name": "sdu" , | |
"device_node": "/dev/sdu" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "80,026,361,856 bytes [80.0 GB]" , | |
"model": "INTEL SSDSA2CW080G3" , | |
"model_family": "Intel 320 Series SSDs" , | |
"phy_protocol": "SATA" , | |
"serial_no": "CVPR13610CA8080BGN" | |
} , | |
"host_information": { | |
"boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"device_name": "sdu" , | |
"device_node": "/dev/sdu" , | |
"host_ip": "10.0.5.45" , | |
"last_boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"last_host_ip": "10.0.5.45" , | |
"last_known_as": "/dev/sdu" , | |
"last_machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" | |
} , | |
"host_ip": "10.0.5.45" , | |
"id": "1586bb40-fbd4-41e0-96c3-9e78510b8f1d" , | |
"lifetime": 0 , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"model": "INTEL SSDSA2CW080G3" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "CVPR13610CA8080BGN" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Model Family: Intel 320 Series SSDs | |
Device Model: INTEL SSDSA2CW080G3 | |
Serial Number: CVPR13610CA8080BGN | |
LU WWN Device Id: 5 001517 95968d889 | |
Firmware Version: 4PC10362 | |
User Capacity: 80,026,361,856 bytes [80.0 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 4 | |
Local Time is: Thu Mar 27 21:30:14 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
GP/S Log at address 0x01 has 1 sectors [Summary SMART error log] | |
GP/S Log at address 0x02 has 8 sectors [Comprehensive SMART error log] | |
GP/S Log at address 0x03 has 8 sectors [Ext. Comprehensive SMART error log] | |
GP/S Log at address 0x04 has 8 sectors [Device Statistics log] | |
GP/S Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP/S Log at address 0x07 has 1 sectors [Extended self-test log] | |
GP/S Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP/S Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP/S Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 4 0 Command failed due to ICRC error | |
0x0004 4 0 R_ERR response for host-to-device data FIS | |
0x0007 4 0 R_ERR response for host-to-device non-data FIS | |
0x0008 4 0 Device-to-host non-data FIS retries | |
0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 4 0 CRC errors within host-to-device FIS | |
0x000d 4 0 Non-CRC errors within host-to-device FIS | |
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC | |
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC | |
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (8 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 0 | |
Note: revision number not 1 implies that no selective self-test has ever been run | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "Error Read SCT Data Table failed: scsi error aborted command | |
SCT Error Recovery Control: | |
Read: Disabled | |
Write: Disabled | |
" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
3 Spin_Up_Time -----K 100 100 000 - 0 | |
4 Start_Stop_Count ----CK 100 100 000 - 0 | |
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 | |
9 Power_On_Hours -O--CK 100 100 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 16 | |
170 Reserve_Block_Count PO--CK 100 100 010 - 0 | |
171 Program_Fail_Count -O--CK 100 100 000 - 0 | |
172 Erase_Fail_Count -O--CK 100 100 000 - 0 | |
183 Runtime_Bad_Block ----CK 100 100 000 - 2 | |
184 End-to-End_Error -O--CK 100 100 090 - 0 | |
187 Reported_Uncorrect -O--CK 100 100 000 - 0 | |
192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 15 | |
199 UDMA_CRC_Error_Count ----CK 100 100 000 - 0 | |
225 Host_Writes_32MiB -O--CK 100 100 000 - 0 | |
226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 | |
227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 65535 | |
228 Workload_Minutes -O--CK 100 100 000 - 65535 | |
232 Available_Reservd_Space PO--CK 100 100 010 - 0 | |
233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 | |
241 Host_Writes_32MiB -O--CK 100 100 000 - 0 | |
242 Host_Reads_32MiB -O--CK 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 1) seconds. | |
Offline data collection | |
capabilities: (0x75) SMART execute Offline immediate. | |
No Auto Offline data collection support. | |
Abort Offline collection upon new | |
command. | |
No Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 1) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 1) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 5 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Available_Reservd_Space": { | |
"attr_name": "Available_Reservd_Space" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "232" , | |
"threshold": "010" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"End_to_End_Error": { | |
"attr_name": "End-to-End_Error" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "184" , | |
"threshold": "090" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Erase_Fail_Count": { | |
"attr_name": "Erase_Fail_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "172" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Host_Reads_32MiB": { | |
"attr_name": "Host_Reads_32MiB" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "242" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Host_Writes_32MiB": { | |
"attr_name": "Host_Writes_32MiB" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "241" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Media_Wearout_Indicator": { | |
"attr_name": "Media_Wearout_Indicator" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "233" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "16" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Program_Fail_Count": { | |
"attr_name": "Program_Fail_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "171" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reported_Uncorrect": { | |
"attr_name": "Reported_Uncorrect" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "187" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reserve_Block_Count": { | |
"attr_name": "Reserve_Block_Count" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "170" , | |
"threshold": "010" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Runtime_Bad_Block": { | |
"attr_name": "Runtime_Bad_Block" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "2" , | |
"smart_id": "183" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "-----K" , | |
"raw_value": "0" , | |
"smart_id": "3" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "0" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Unsafe_Shutdown_Count": { | |
"attr_name": "Unsafe_Shutdown_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "15" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Workld_Host_Reads_Perc": { | |
"attr_name": "Workld_Host_Reads_Perc" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "65535" , | |
"smart_id": "227" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Workld_Media_Wear_Indic": { | |
"attr_name": "Workld_Media_Wear_Indic" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "65535" , | |
"smart_id": "226" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Workload_Minutes": { | |
"attr_name": "Workload_Minutes" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "65535" , | |
"smart_id": "228" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"device_name": "sdh" , | |
"device_node": "/dev/sdh" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824262C5RJVD" | |
} , | |
"host_information": { | |
"boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"device_name": "sdh" , | |
"device_node": "/dev/sdh" , | |
"host_ip": "10.0.5.45" , | |
"last_boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"last_host_ip": "10.0.5.45" , | |
"last_known_as": "/dev/sdh" , | |
"last_machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" | |
} , | |
"host_ip": "10.0.5.45" , | |
"id": "1a7b384f-60ac-4ea4-9565-0c1963820301" , | |
"lifetime": 68400 , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824262C5RJVD" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824262C5RJVD | |
LU WWN Device Id: 5 000cca 6d3c29a7b | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 21:06:28 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 20/24 Celsius | |
Lifetime Min/Max Temperature: 20/57 Celsius | |
Lifetime Average Temperature: 45 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (28) | |
Error Write SCT (Get) Error Recovery Control Command failed: scsi error unsupported scsi opcode | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
29 2014-03-26 18:59 36 ***************** | |
30 2014-03-26 19:00 35 **************** | |
31 2014-03-26 19:01 34 *************** | |
32 2014-03-26 19:02 34 *************** | |
33 2014-03-26 19:03 33 ************** | |
... ..( 6 skipped). .. ************** | |
40 2014-03-26 19:10 33 ************** | |
41 2014-03-26 19:11 32 ************* | |
42 2014-03-26 19:12 ? - | |
43 2014-03-26 19:13 23 **** | |
44 2014-03-26 19:14 24 ***** | |
45 2014-03-26 19:15 25 ****** | |
46 2014-03-26 19:16 25 ****** | |
47 2014-03-26 19:17 26 ******* | |
48 2014-03-26 19:18 26 ******* | |
49 2014-03-26 19:19 27 ******** | |
... ..( 2 skipped). .. ******** | |
52 2014-03-26 19:22 27 ******** | |
53 2014-03-26 19:23 ? - | |
54 2014-03-26 19:24 26 ******* | |
55 2014-03-26 19:25 27 ******** | |
56 2014-03-26 19:26 27 ******** | |
57 2014-03-26 19:27 27 ******** | |
58 2014-03-26 19:28 28 ********* | |
59 2014-03-26 19:29 28 ********* | |
60 2014-03-26 19:30 28 ********* | |
61 2014-03-26 19:31 27 ******** | |
62 2014-03-26 19:32 28 ********* | |
63 2014-03-26 19:33 28 ********* | |
64 2014-03-26 19:34 ? - | |
65 2014-03-26 19:35 27 ******** | |
66 2014-03-26 19:36 28 ********* | |
67 2014-03-26 19:37 28 ********* | |
68 2014-03-26 19:38 29 ********** | |
69 2014-03-26 19:39 29 ********** | |
70 2014-03-26 19:40 30 *********** | |
... ..( 4 skipped). .. *********** | |
75 2014-03-26 19:45 30 *********** | |
76 2014-03-26 19:46 31 ************ | |
... ..( 3 skipped). .. ************ | |
80 2014-03-26 19:50 31 ************ | |
81 2014-03-26 19:51 ? - | |
82 2014-03-26 19:52 30 *********** | |
... ..( 3 skipped). .. *********** | |
86 2014-03-26 19:56 30 *********** | |
87 2014-03-26 19:57 31 ************ | |
... ..( 3 skipped). .. ************ | |
91 2014-03-26 20:01 31 ************ | |
92 2014-03-26 20:02 ? - | |
93 2014-03-26 20:03 30 *********** | |
... ..( 4 skipped). .. *********** | |
98 2014-03-26 20:08 30 *********** | |
99 2014-03-26 20:09 ? - | |
100 2014-03-26 20:10 23 **** | |
101 2014-03-26 20:11 24 ***** | |
102 2014-03-26 20:12 25 ****** | |
103 2014-03-26 20:13 26 ******* | |
104 2014-03-26 20:14 26 ******* | |
105 2014-03-26 20:15 ? - | |
106 2014-03-26 20:16 27 ******** | |
... ..( 7 skipped). .. ******** | |
114 2014-03-26 20:24 27 ******** | |
115 2014-03-26 20:25 ? - | |
116 2014-03-26 20:26 27 ******** | |
117 2014-03-26 20:27 27 ******** | |
118 2014-03-26 20:28 28 ********* | |
119 2014-03-26 20:29 28 ********* | |
120 2014-03-26 20:30 29 ********** | |
... ..( 2 skipped). .. ********** | |
123 2014-03-26 20:33 29 ********** | |
124 2014-03-26 20:34 30 *********** | |
125 2014-03-26 20:35 30 *********** | |
126 2014-03-26 20:36 29 ********** | |
127 2014-03-26 20:37 30 *********** | |
... ..( 4 skipped). .. *********** | |
4 2014-03-26 20:42 30 *********** | |
5 2014-03-26 20:43 ? - | |
6 2014-03-26 20:44 30 *********** | |
... ..( 2 skipped). .. *********** | |
9 2014-03-26 20:47 30 *********** | |
10 2014-03-26 20:48 ? - | |
11 2014-03-26 20:49 30 *********** | |
12 2014-03-26 20:50 29 ********** | |
... ..( 2 skipped). .. ********** | |
15 2014-03-26 20:53 29 ********** | |
16 2014-03-26 20:54 30 *********** | |
17 2014-03-26 20:55 30 *********** | |
18 2014-03-26 20:56 ? - | |
19 2014-03-26 20:57 21 ** | |
20 2014-03-26 20:58 22 *** | |
21 2014-03-26 20:59 22 *** | |
22 2014-03-26 21:00 23 **** | |
23 2014-03-26 21:01 23 **** | |
24 2014-03-26 21:02 24 ***** | |
... ..( 3 skipped). .. ***** | |
28 2014-03-26 21:06 24 ***** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 235 235 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 20 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 19 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 18 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 15 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 20 | |
194 Temperature_Celsius -O---- 250 250 000 - 24 (Min/Max 20/57) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 63) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "20" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "18" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "15" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "19" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "235" , | |
"worst": "235" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "20" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "24" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "250" , | |
"worst": "250" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "f371b291-08cb-471d-98a8-b82a5d8edae3" , | |
"device_name": "sdr" , | |
"device_node": "/dev/sdr" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824262037G5J" | |
} , | |
"host_information": { | |
"boot_id": "f371b291-08cb-471d-98a8-b82a5d8edae3" , | |
"device_name": "sdr" , | |
"device_node": "/dev/sdr" , | |
"host_ip": "10.0.5.52" , | |
"last_boot_id": "f371b291-08cb-471d-98a8-b82a5d8edae3" , | |
"last_host_ip": "10.0.5.52" , | |
"last_known_as": "/dev/sdr" , | |
"last_machine_id": "e6ef0a82acee8841da89d6b14a231869" , | |
"machine_id": "e6ef0a82acee8841da89d6b14a231869" | |
} , | |
"host_ip": "10.0.5.52" , | |
"id": "1e2640cb-0b23-4a5f-813b-f7c27b6f24eb" , | |
"lifetime": 64800 , | |
"machine_id": "e6ef0a82acee8841da89d6b14a231869" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824262037G5J" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824262037G5J | |
LU WWN Device Id: 5 000cca 6dbc1791b | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 20:29:32 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 20/24 Celsius | |
Lifetime Min/Max Temperature: 20/59 Celsius | |
Lifetime Average Temperature: 47 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (114) | |
Error SMART WRITE LOG does not return COUNT and LBA_LOW register | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
115 2014-03-26 18:22 52 ********************************* | |
116 2014-03-26 18:23 52 ********************************* | |
117 2014-03-26 18:24 53 ********************************** | |
... ..( 9 skipped). .. ********************************** | |
127 2014-03-26 18:34 53 ********************************** | |
0 2014-03-26 18:35 52 ********************************* | |
1 2014-03-26 18:36 53 ********************************** | |
2 2014-03-26 18:37 53 ********************************** | |
3 2014-03-26 18:38 52 ********************************* | |
4 2014-03-26 18:39 53 ********************************** | |
5 2014-03-26 18:40 52 ********************************* | |
6 2014-03-26 18:41 53 ********************************** | |
7 2014-03-26 18:42 53 ********************************** | |
8 2014-03-26 18:43 53 ********************************** | |
9 2014-03-26 18:44 52 ********************************* | |
... ..( 7 skipped). .. ********************************* | |
17 2014-03-26 18:52 52 ********************************* | |
18 2014-03-26 18:53 51 ******************************** | |
19 2014-03-26 18:54 52 ********************************* | |
20 2014-03-26 18:55 51 ******************************** | |
21 2014-03-26 18:56 51 ******************************** | |
22 2014-03-26 18:57 51 ******************************** | |
23 2014-03-26 18:58 47 **************************** | |
24 2014-03-26 18:59 41 ********************** | |
25 2014-03-26 19:00 38 ******************* | |
26 2014-03-26 19:01 36 ***************** | |
27 2014-03-26 19:02 35 **************** | |
28 2014-03-26 19:03 35 **************** | |
29 2014-03-26 19:04 34 *************** | |
30 2014-03-26 19:05 34 *************** | |
31 2014-03-26 19:06 33 ************** | |
... ..( 4 skipped). .. ************** | |
36 2014-03-26 19:11 33 ************** | |
37 2014-03-26 19:12 ? - | |
38 2014-03-26 19:13 29 ********** | |
... ..( 4 skipped). .. ********** | |
43 2014-03-26 19:18 29 ********** | |
44 2014-03-26 19:19 28 ********* | |
... ..( 2 skipped). .. ********* | |
47 2014-03-26 19:22 28 ********* | |
48 2014-03-26 19:23 ? - | |
49 2014-03-26 19:24 28 ********* | |
50 2014-03-26 19:25 28 ********* | |
51 2014-03-26 19:26 29 ********** | |
52 2014-03-26 19:27 29 ********** | |
53 2014-03-26 19:28 29 ********** | |
54 2014-03-26 19:29 30 *********** | |
... ..( 3 skipped). .. *********** | |
58 2014-03-26 19:33 30 *********** | |
59 2014-03-26 19:34 31 ************ | |
... ..( 18 skipped). .. ************ | |
78 2014-03-26 19:53 31 ************ | |
79 2014-03-26 19:54 ? - | |
80 2014-03-26 19:55 30 *********** | |
... ..( 3 skipped). .. *********** | |
84 2014-03-26 19:59 30 *********** | |
85 2014-03-26 20:00 31 ************ | |
... ..( 3 skipped). .. ************ | |
89 2014-03-26 20:04 31 ************ | |
90 2014-03-26 20:05 ? - | |
91 2014-03-26 20:06 30 *********** | |
... ..( 4 skipped). .. *********** | |
96 2014-03-26 20:11 30 *********** | |
97 2014-03-26 20:12 ? - | |
98 2014-03-26 20:13 21 ** | |
99 2014-03-26 20:14 21 ** | |
100 2014-03-26 20:15 22 *** | |
101 2014-03-26 20:16 23 **** | |
... ..( 2 skipped). .. **** | |
104 2014-03-26 20:19 23 **** | |
105 2014-03-26 20:20 24 ***** | |
... ..( 8 skipped). .. ***** | |
114 2014-03-26 20:29 24 ***** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 15 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 18 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 13 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 11 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 15 | |
194 Temperature_Celsius -O---- 250 250 000 - 24 (Min/Max 20/59) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 63) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "15" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "13" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "11" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "18" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "15" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "24" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "250" , | |
"worst": "250" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": -1 , | |
"attr_failing": -1 , | |
"bad_sectors": 1 , | |
"boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"device_name": "sdy" , | |
"device_node": "/dev/sdy" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "160,041,885,696 bytes [160 GB]" , | |
"model": "INTEL SSDSA2BW160G3" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "CVPR1456029S160DGN" | |
} , | |
"host_information": { | |
"boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"device_name": "sdy" , | |
"device_node": "/dev/sdy" , | |
"host_ip": "10.0.5.45" , | |
"last_boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"last_host_ip": "10.0.5.45" , | |
"last_known_as": "/dev/sdy" , | |
"last_machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" | |
} , | |
"host_ip": "10.0.5.45" , | |
"id": "25b6ac13-73fc-4e18-b5f2-2f1774a6070b" , | |
"lifetime": 0 , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"model": "INTEL SSDSA2BW160G3" , | |
"self_test_percent_left": -1 , | |
"self_test_status": "" , | |
"serial_no": "CVPR1456029S160DGN" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
Error SMART Read Selective Self-Test Log failed: Input/output error | |
Smartctl: SMART Selective Self Test Log Read Failed | |
Error Read SCT Data Table failed: scsi error aborted command | |
Error Write SCT (Get) Error Recovery Control Command failed: Input/output error | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: INTEL SSDSA2BW160G3 | |
Serial Number: CVPR1456029S160DGN | |
LU WWN Device Id: 5 001517 bb2730913 | |
Firmware Version: 4PC10362 | |
User Capacity: 160,041,885,696 bytes [160 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 4 | |
Local Time is: Thu Mar 27 22:33:07 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
GP/S Log at address 0x01 has 1 sectors [Summary SMART error log] | |
GP/S Log at address 0x02 has 8 sectors [Comprehensive SMART error log] | |
GP/S Log at address 0x03 has 8 sectors [Ext. Comprehensive SMART error log] | |
GP/S Log at address 0x04 has 8 sectors [Device Statistics log] | |
GP/S Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP/S Log at address 0x07 has 1 sectors [Extended self-test log] | |
GP/S Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP/S Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP/S Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 4 0 Command failed due to ICRC error | |
0x0004 4 0 R_ERR response for host-to-device data FIS | |
0x0007 4 0 R_ERR response for host-to-device non-data FIS | |
0x0008 4 0 Device-to-host non-data FIS retries | |
0x0009 4 7 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 4 8 Device-to-host register FISes sent due to a COMRESET | |
0x000b 4 0 CRC errors within host-to-device FIS | |
0x000d 4 0 Non-CRC errors within host-to-device FIS | |
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC | |
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC | |
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (8 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 0 | |
Note: revision number not 1 implies that no selective self-test has ever been run | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "Error Read SCT Data Table failed: scsi error aborted command | |
Error Write SCT (Get) Error Recovery Control Command failed: scsi error unsupported field in scsi command | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
3 Spin_Up_Time -----K 100 100 000 - 0 | |
4 Start_Stop_Count ----CK 100 100 000 - 0 | |
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 1 | |
9 Power_On_Hours -O--CK 100 100 000 - 1 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 45 | |
170 Unknown_Attribute PO--CK 100 100 010 - 0 | |
171 Unknown_Attribute -O--CK 100 100 000 - 0 | |
172 Unknown_Attribute -O--CK 100 100 000 - 0 | |
183 Runtime_Bad_Block ----CK 100 100 000 - 2 | |
184 End-to-End_Error -O--CK 100 100 090 - 0 | |
187 Reported_Uncorrect -O--CK 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 44 | |
199 UDMA_CRC_Error_Count ----CK 100 100 000 - 0 | |
225 Load_Cycle_Count -O--CK 100 100 000 - 2500 | |
226 Load-in_Time -O--CK 100 100 000 - 20 | |
227 Torq-amp_Count -O--CK 100 100 000 - 96 | |
228 Power-off_Retract_Count -O--CK 100 100 000 - 134217793 | |
232 Available_Reservd_Space PO--CK 100 100 010 - 0 | |
233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 | |
241 Total_LBAs_Written -O--CK 100 100 000 - 2500 | |
242 Total_LBAs_Read -O--CK 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
Warning: This result is based on an Attribute check. | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 1) seconds. | |
Offline data collection | |
capabilities: (0x75) SMART execute Offline immediate. | |
No Auto Offline data collection support. | |
Abort Offline collection upon new | |
command. | |
No Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 1) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 1) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 5 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Available_Reservd_Space": { | |
"attr_name": "Available_Reservd_Space" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "232" , | |
"threshold": "010" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"End_to_End_Error": { | |
"attr_name": "End-to-End_Error" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "184" , | |
"threshold": "090" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "2500" , | |
"smart_id": "225" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_in_Time": { | |
"attr_name": "Load-in_Time" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "20" , | |
"smart_id": "226" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Media_Wearout_Indicator": { | |
"attr_name": "Media_Wearout_Indicator" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "233" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "45" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "44" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "1" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_off_Retract_Count": { | |
"attr_name": "Power-off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "134217793" , | |
"smart_id": "228" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "1" , | |
"smart_id": "5" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reported_Uncorrect": { | |
"attr_name": "Reported_Uncorrect" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "187" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Runtime_Bad_Block": { | |
"attr_name": "Runtime_Bad_Block" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "2" , | |
"smart_id": "183" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "-----K" , | |
"raw_value": "0" , | |
"smart_id": "3" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "0" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Torq_amp_Count": { | |
"attr_name": "Torq-amp_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "96" , | |
"smart_id": "227" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Total_LBAs_Read": { | |
"attr_name": "Total_LBAs_Read" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "242" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Total_LBAs_Written": { | |
"attr_name": "Total_LBAs_Written" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "2500" , | |
"smart_id": "241" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Unknown_Attribute": { | |
"attr_name": "Unknown_Attribute" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "172" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"device_name": "sdk" , | |
"device_node": "/dev/sdk" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824262C5T6ED" | |
} , | |
"host_information": { | |
"boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"device_name": "sdk" , | |
"device_node": "/dev/sdk" , | |
"host_ip": "10.0.5.50" , | |
"last_boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"last_host_ip": "10.0.5.50" , | |
"last_known_as": "/dev/sdk" , | |
"last_machine_id": "300a76492cf73e527d61b3e849efde1b" , | |
"machine_id": "300a76492cf73e527d61b3e849efde1b" | |
} , | |
"host_ip": "10.0.5.50" , | |
"id": "261e3698-ed43-48ac-9293-3d0f8e9f4eb4" , | |
"lifetime": 68400 , | |
"machine_id": "300a76492cf73e527d61b3e849efde1b" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824262C5T6ED" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824262C5T6ED | |
LU WWN Device Id: 5 000cca 6d3c2a0ba | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 22:46:16 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 25 Celsius | |
Power Cycle Min/Max Temperature: 23/25 Celsius | |
Lifetime Min/Max Temperature: 23/61 Celsius | |
Lifetime Average Temperature: 47 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (120) | |
SCT Error Recovery Control: | |
Read: Disabled | |
Write: 255 (25.5 seconds) | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
121 2014-03-26 20:39 51 ******************************** | |
122 2014-03-26 20:40 51 ******************************** | |
123 2014-03-26 20:41 51 ******************************** | |
124 2014-03-26 20:42 50 ******************************* | |
... ..( 2 skipped). .. ******************************* | |
127 2014-03-26 20:45 50 ******************************* | |
0 2014-03-26 20:46 49 ****************************** | |
... ..( 5 skipped). .. ****************************** | |
6 2014-03-26 20:52 49 ****************************** | |
7 2014-03-26 20:53 50 ******************************* | |
8 2014-03-26 20:54 50 ******************************* | |
9 2014-03-26 20:55 50 ******************************* | |
10 2014-03-26 20:56 51 ******************************** | |
... ..( 3 skipped). .. ******************************** | |
14 2014-03-26 21:00 51 ******************************** | |
15 2014-03-26 21:01 52 ********************************* | |
16 2014-03-26 21:02 52 ********************************* | |
17 2014-03-26 21:03 51 ******************************** | |
18 2014-03-26 21:04 51 ******************************** | |
19 2014-03-26 21:05 51 ******************************** | |
20 2014-03-26 21:06 52 ********************************* | |
21 2014-03-26 21:07 51 ******************************** | |
... ..( 6 skipped). .. ******************************** | |
28 2014-03-26 21:14 51 ******************************** | |
29 2014-03-26 21:15 47 **************************** | |
30 2014-03-26 21:16 41 ********************** | |
31 2014-03-26 21:17 38 ******************* | |
32 2014-03-26 21:18 36 ***************** | |
33 2014-03-26 21:19 35 **************** | |
34 2014-03-26 21:20 34 *************** | |
... ..( 2 skipped). .. *************** | |
37 2014-03-26 21:23 34 *************** | |
38 2014-03-26 21:24 33 ************** | |
... ..( 4 skipped). .. ************** | |
43 2014-03-26 21:29 33 ************** | |
44 2014-03-26 21:30 ? - | |
45 2014-03-26 21:31 23 **** | |
46 2014-03-26 21:32 24 ***** | |
47 2014-03-26 21:33 25 ****** | |
48 2014-03-26 21:34 26 ******* | |
49 2014-03-26 21:35 26 ******* | |
50 2014-03-26 21:36 27 ******** | |
... ..( 2 skipped). .. ******** | |
53 2014-03-26 21:39 27 ******** | |
54 2014-03-26 21:40 ? - | |
55 2014-03-26 21:41 28 ********* | |
56 2014-03-26 21:42 28 ********* | |
57 2014-03-26 21:43 29 ********** | |
58 2014-03-26 21:44 30 *********** | |
59 2014-03-26 21:45 30 *********** | |
60 2014-03-26 21:46 30 *********** | |
61 2014-03-26 21:47 31 ************ | |
... ..( 2 skipped). .. ************ | |
64 2014-03-26 21:50 31 ************ | |
65 2014-03-26 21:51 32 ************* | |
... ..( 7 skipped). .. ************* | |
73 2014-03-26 21:59 32 ************* | |
74 2014-03-26 22:00 33 ************** | |
75 2014-03-26 22:01 32 ************* | |
76 2014-03-26 22:02 33 ************** | |
77 2014-03-26 22:03 32 ************* | |
78 2014-03-26 22:04 33 ************** | |
79 2014-03-26 22:05 32 ************* | |
80 2014-03-26 22:06 33 ************** | |
81 2014-03-26 22:07 32 ************* | |
82 2014-03-26 22:08 33 ************** | |
83 2014-03-26 22:09 32 ************* | |
84 2014-03-26 22:10 33 ************** | |
85 2014-03-26 22:11 32 ************* | |
86 2014-03-26 22:12 32 ************* | |
87 2014-03-26 22:13 33 ************** | |
88 2014-03-26 22:14 32 ************* | |
89 2014-03-26 22:15 33 ************** | |
90 2014-03-26 22:16 33 ************** | |
91 2014-03-26 22:17 33 ************** | |
92 2014-03-26 22:18 32 ************* | |
93 2014-03-26 22:19 32 ************* | |
94 2014-03-26 22:20 32 ************* | |
95 2014-03-26 22:21 33 ************** | |
96 2014-03-26 22:22 32 ************* | |
97 2014-03-26 22:23 ? - | |
98 2014-03-26 22:24 32 ************* | |
99 2014-03-26 22:25 31 ************ | |
100 2014-03-26 22:26 32 ************* | |
... ..( 6 skipped). .. ************* | |
107 2014-03-26 22:33 32 ************* | |
108 2014-03-26 22:34 ? - | |
109 2014-03-26 22:35 31 ************ | |
... ..( 3 skipped). .. ************ | |
113 2014-03-26 22:39 31 ************ | |
114 2014-03-26 22:40 ? - | |
115 2014-03-26 22:41 23 **** | |
116 2014-03-26 22:42 24 ***** | |
117 2014-03-26 22:43 24 ***** | |
118 2014-03-26 22:44 25 ****** | |
119 2014-03-26 22:45 25 ****** | |
120 2014-03-26 22:46 25 ****** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 15 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 19 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 13 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 11 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 15 | |
194 Temperature_Celsius -O---- 240 240 000 - 25 (Min/Max 23/61) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 64) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "15" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "13" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "11" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "19" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "15" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "25" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "240" , | |
"worst": "240" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"device_name": "sdf" , | |
"device_node": "/dev/sdf" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824262C60UTD" | |
} , | |
"host_information": { | |
"boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"device_name": "sdf" , | |
"device_node": "/dev/sdf" , | |
"host_ip": "10.0.5.50" , | |
"last_boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"last_host_ip": "10.0.5.50" , | |
"last_known_as": "/dev/sdf" , | |
"last_machine_id": "300a76492cf73e527d61b3e849efde1b" , | |
"machine_id": "300a76492cf73e527d61b3e849efde1b" | |
} , | |
"host_ip": "10.0.5.50" , | |
"id": "01af517f-b6a7-4953-be47-90aac6572faa" , | |
"lifetime": 64800 , | |
"machine_id": "300a76492cf73e527d61b3e849efde1b" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824262C60UTD" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824262C60UTD | |
LU WWN Device Id: 5 000cca 6d3c2bd59 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 22:46:46 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 25 Celsius | |
Power Cycle Min/Max Temperature: 22/25 Celsius | |
Lifetime Min/Max Temperature: 22/59 Celsius | |
Lifetime Average Temperature: 46 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (100) | |
Error Write SCT (Get) Error Recovery Control Command failed: scsi error unsupported scsi opcode | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
101 2014-03-26 20:39 50 ******************************* | |
102 2014-03-26 20:40 50 ******************************* | |
103 2014-03-26 20:41 51 ******************************** | |
104 2014-03-26 20:42 53 ********************************** | |
105 2014-03-26 20:43 54 *********************************** | |
106 2014-03-26 20:44 54 *********************************** | |
107 2014-03-26 20:45 53 ********************************** | |
108 2014-03-26 20:46 52 ********************************* | |
109 2014-03-26 20:47 51 ******************************** | |
110 2014-03-26 20:48 51 ******************************** | |
111 2014-03-26 20:49 50 ******************************* | |
112 2014-03-26 20:50 50 ******************************* | |
113 2014-03-26 20:51 50 ******************************* | |
114 2014-03-26 20:52 49 ****************************** | |
115 2014-03-26 20:53 49 ****************************** | |
116 2014-03-26 20:54 49 ****************************** | |
117 2014-03-26 20:55 50 ******************************* | |
... ..( 31 skipped). .. ******************************* | |
21 2014-03-26 21:27 50 ******************************* | |
22 2014-03-26 21:28 49 ****************************** | |
23 2014-03-26 21:29 50 ******************************* | |
... ..( 2 skipped). .. ******************************* | |
26 2014-03-26 21:32 50 ******************************* | |
27 2014-03-26 21:33 49 ****************************** | |
28 2014-03-26 21:34 43 ************************ | |
29 2014-03-26 21:35 39 ******************** | |
30 2014-03-26 21:36 37 ****************** | |
31 2014-03-26 21:37 36 ***************** | |
32 2014-03-26 21:38 35 **************** | |
33 2014-03-26 21:39 35 **************** | |
34 2014-03-26 21:40 34 *************** | |
... ..( 2 skipped). .. *************** | |
37 2014-03-26 21:43 34 *************** | |
38 2014-03-26 21:44 33 ************** | |
... ..( 2 skipped). .. ************** | |
41 2014-03-26 21:47 33 ************** | |
42 2014-03-26 21:48 ? - | |
43 2014-03-26 21:49 24 ***** | |
44 2014-03-26 21:50 25 ****** | |
45 2014-03-26 21:51 26 ******* | |
46 2014-03-26 21:52 26 ******* | |
47 2014-03-26 21:53 27 ******** | |
48 2014-03-26 21:54 27 ******** | |
49 2014-03-26 21:55 27 ******** | |
50 2014-03-26 21:56 28 ********* | |
51 2014-03-26 21:57 28 ********* | |
52 2014-03-26 21:58 ? - | |
53 2014-03-26 21:59 28 ********* | |
54 2014-03-26 22:00 28 ********* | |
55 2014-03-26 22:01 29 ********** | |
56 2014-03-26 22:02 29 ********** | |
57 2014-03-26 22:03 29 ********** | |
58 2014-03-26 22:04 30 *********** | |
... ..( 2 skipped). .. *********** | |
61 2014-03-26 22:07 30 *********** | |
62 2014-03-26 22:08 31 ************ | |
... ..( 12 skipped). .. ************ | |
75 2014-03-26 22:21 31 ************ | |
76 2014-03-26 22:22 ? - | |
77 2014-03-26 22:23 31 ************ | |
78 2014-03-26 22:24 30 *********** | |
79 2014-03-26 22:25 31 ************ | |
... ..( 6 skipped). .. ************ | |
86 2014-03-26 22:32 31 ************ | |
87 2014-03-26 22:33 ? - | |
88 2014-03-26 22:34 30 *********** | |
89 2014-03-26 22:35 30 *********** | |
90 2014-03-26 22:36 30 *********** | |
91 2014-03-26 22:37 31 ************ | |
92 2014-03-26 22:38 31 ************ | |
93 2014-03-26 22:39 31 ************ | |
94 2014-03-26 22:40 ? - | |
95 2014-03-26 22:41 23 **** | |
96 2014-03-26 22:42 24 ***** | |
97 2014-03-26 22:43 24 ***** | |
98 2014-03-26 22:44 24 ***** | |
99 2014-03-26 22:45 25 ****** | |
100 2014-03-26 22:46 25 ****** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 14 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 18 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 12 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 10 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 14 | |
194 Temperature_Celsius -O---- 240 240 000 - 25 (Min/Max 22/59) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 62) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "14" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "12" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "10" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "18" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "14" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "25" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "240" , | |
"worst": "240" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "2555c20b-6f7f-4c7d-8a4c-8e53df6e567f" , | |
"device_name": "sdu" , | |
"device_node": "/dev/sdu" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E18G4263CMVAGD" | |
} , | |
"host_information": { | |
"boot_id": "2555c20b-6f7f-4c7d-8a4c-8e53df6e567f" , | |
"device_name": "sdu" , | |
"device_node": "/dev/sdu" , | |
"host_ip": "10.0.5.51" , | |
"last_boot_id": "2555c20b-6f7f-4c7d-8a4c-8e53df6e567f" , | |
"last_host_ip": "10.0.5.51" , | |
"last_known_as": "/dev/sdu" , | |
"last_machine_id": "3844bf17de8c06f75ff5fcc94bd62999" , | |
"machine_id": "3844bf17de8c06f75ff5fcc94bd62999" | |
} , | |
"host_ip": "10.0.5.51" , | |
"id": "01d368ed-b705-4211-a9c2-54fdb4ef14b3" , | |
"lifetime": 68400 , | |
"machine_id": "3844bf17de8c06f75ff5fcc94bd62999" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E18G4263CMVAGD" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E18G4263CMVAGD | |
LU WWN Device Id: 5 000cca 6d4c905eb | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 18:34:49 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 23 Celsius | |
Power Cycle Min/Max Temperature: 20/23 Celsius | |
Lifetime Min/Max Temperature: 20/52 Celsius | |
Lifetime Average Temperature: 41 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (55) | |
Error SMART WRITE LOG does not return COUNT and LBA_LOW register | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
56 2014-03-26 16:27 48 ***************************** | |
57 2014-03-26 16:28 48 ***************************** | |
58 2014-03-26 16:29 47 **************************** | |
59 2014-03-26 16:30 48 ***************************** | |
60 2014-03-26 16:31 48 ***************************** | |
61 2014-03-26 16:32 48 ***************************** | |
62 2014-03-26 16:33 47 **************************** | |
63 2014-03-26 16:34 48 ***************************** | |
64 2014-03-26 16:35 47 **************************** | |
65 2014-03-26 16:36 48 ***************************** | |
66 2014-03-26 16:37 48 ***************************** | |
67 2014-03-26 16:38 47 **************************** | |
68 2014-03-26 16:39 48 ***************************** | |
69 2014-03-26 16:40 48 ***************************** | |
70 2014-03-26 16:41 48 ***************************** | |
71 2014-03-26 16:42 47 **************************** | |
72 2014-03-26 16:43 47 **************************** | |
73 2014-03-26 16:44 46 *************************** | |
74 2014-03-26 16:45 47 **************************** | |
75 2014-03-26 16:46 46 *************************** | |
76 2014-03-26 16:47 47 **************************** | |
77 2014-03-26 16:48 47 **************************** | |
78 2014-03-26 16:49 47 **************************** | |
79 2014-03-26 16:50 46 *************************** | |
80 2014-03-26 16:51 47 **************************** | |
81 2014-03-26 16:52 47 **************************** | |
82 2014-03-26 16:53 47 **************************** | |
83 2014-03-26 16:54 46 *************************** | |
84 2014-03-26 16:55 47 **************************** | |
85 2014-03-26 16:56 47 **************************** | |
86 2014-03-26 16:57 47 **************************** | |
87 2014-03-26 16:58 46 *************************** | |
88 2014-03-26 16:59 47 **************************** | |
89 2014-03-26 17:00 47 **************************** | |
90 2014-03-26 17:01 47 **************************** | |
91 2014-03-26 17:02 46 *************************** | |
92 2014-03-26 17:03 43 ************************ | |
93 2014-03-26 17:04 39 ******************** | |
94 2014-03-26 17:05 38 ******************* | |
95 2014-03-26 17:06 36 ***************** | |
96 2014-03-26 17:07 35 **************** | |
... ..( 11 skipped). .. **************** | |
108 2014-03-26 17:19 35 **************** | |
109 2014-03-26 17:20 ? - | |
110 2014-03-26 17:21 25 ****** | |
111 2014-03-26 17:22 26 ******* | |
112 2014-03-26 17:23 27 ******** | |
113 2014-03-26 17:24 27 ******** | |
114 2014-03-26 17:25 ? - | |
115 2014-03-26 17:26 28 ********* | |
116 2014-03-26 17:27 29 ********** | |
117 2014-03-26 17:28 29 ********** | |
118 2014-03-26 17:29 30 *********** | |
119 2014-03-26 17:30 30 *********** | |
120 2014-03-26 17:31 31 ************ | |
121 2014-03-26 17:32 31 ************ | |
122 2014-03-26 17:33 31 ************ | |
123 2014-03-26 17:34 32 ************* | |
... ..( 2 skipped). .. ************* | |
126 2014-03-26 17:37 32 ************* | |
127 2014-03-26 17:38 33 ************** | |
... ..( 28 skipped). .. ************** | |
28 2014-03-26 18:07 33 ************** | |
29 2014-03-26 18:08 32 ************* | |
30 2014-03-26 18:09 32 ************* | |
31 2014-03-26 18:10 33 ************** | |
32 2014-03-26 18:11 32 ************* | |
33 2014-03-26 18:12 32 ************* | |
34 2014-03-26 18:13 33 ************** | |
35 2014-03-26 18:14 33 ************** | |
36 2014-03-26 18:15 33 ************** | |
37 2014-03-26 18:16 32 ************* | |
38 2014-03-26 18:17 32 ************* | |
39 2014-03-26 18:18 ? - | |
40 2014-03-26 18:19 31 ************ | |
41 2014-03-26 18:20 32 ************* | |
42 2014-03-26 18:21 32 ************* | |
43 2014-03-26 18:22 ? - | |
44 2014-03-26 18:23 32 ************* | |
45 2014-03-26 18:24 32 ************* | |
46 2014-03-26 18:25 32 ************* | |
47 2014-03-26 18:26 ? - | |
48 2014-03-26 18:27 20 * | |
49 2014-03-26 18:28 21 ** | |
50 2014-03-26 18:29 22 *** | |
51 2014-03-26 18:30 22 *** | |
52 2014-03-26 18:31 22 *** | |
53 2014-03-26 18:32 23 **** | |
54 2014-03-26 18:33 23 **** | |
55 2014-03-26 18:34 23 **** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 27 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 19 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 25 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 18 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 27 | |
194 Temperature_Celsius -O---- 253 253 000 - 23 (Min/Max 20/52) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 60) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "27" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "25" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "18" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "19" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "27" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "23" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"device_name": "sds" , | |
"device_node": "/dev/sds" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "80,026,361,856 bytes [80.0 GB]" , | |
"model": "INTEL SSDSA2CW080G3" , | |
"model_family": "Intel 320 Series SSDs" , | |
"phy_protocol": "SATA" , | |
"serial_no": "BTPR31400182080BGN" | |
} , | |
"host_information": { | |
"boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"device_name": "sds" , | |
"device_node": "/dev/sds" , | |
"host_ip": "10.0.5.45" , | |
"last_boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"last_host_ip": "10.0.5.45" , | |
"last_known_as": "/dev/sds" , | |
"last_machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" | |
} , | |
"host_ip": "10.0.5.45" , | |
"id": "05f4282f-3c70-465b-91d3-f808f3a61ed8" , | |
"lifetime": 0 , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"model": "INTEL SSDSA2CW080G3" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "BTPR31400182080BGN" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Model Family: Intel 320 Series SSDs | |
Device Model: INTEL SSDSA2CW080G3 | |
Serial Number: BTPR31400182080BGN | |
LU WWN Device Id: 5 001517 8f35fa85e | |
Firmware Version: 4PC10362 | |
User Capacity: 80,026,361,856 bytes [80.0 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 4 | |
Local Time is: Thu Mar 27 21:30:07 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
GP/S Log at address 0x01 has 1 sectors [Summary SMART error log] | |
GP/S Log at address 0x02 has 8 sectors [Comprehensive SMART error log] | |
GP/S Log at address 0x03 has 8 sectors [Ext. Comprehensive SMART error log] | |
GP/S Log at address 0x04 has 8 sectors [Device Statistics log] | |
GP/S Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP/S Log at address 0x07 has 1 sectors [Extended self-test log] | |
GP/S Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP/S Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP/S Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 4 0 Command failed due to ICRC error | |
0x0004 4 0 R_ERR response for host-to-device data FIS | |
0x0007 4 0 R_ERR response for host-to-device non-data FIS | |
0x0008 4 0 Device-to-host non-data FIS retries | |
0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 4 0 CRC errors within host-to-device FIS | |
0x000d 4 0 Non-CRC errors within host-to-device FIS | |
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC | |
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC | |
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (8 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 0 | |
Note: revision number not 1 implies that no selective self-test has ever been run | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "Error Read SCT Data Table failed: scsi error aborted command | |
Error SMART WRITE LOG does not return COUNT and LBA_LOW register | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
3 Spin_Up_Time -----K 100 100 000 - 0 | |
4 Start_Stop_Count ----CK 100 100 000 - 0 | |
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 | |
9 Power_On_Hours -O--CK 100 100 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 34 | |
170 Reserve_Block_Count PO--CK 100 100 010 - 0 | |
171 Program_Fail_Count -O--CK 100 100 000 - 0 | |
172 Erase_Fail_Count -O--CK 100 100 000 - 0 | |
183 Runtime_Bad_Block ----CK 100 100 000 - 2 | |
184 End-to-End_Error -O--CK 100 100 090 - 0 | |
187 Reported_Uncorrect -O--CK 100 100 000 - 0 | |
192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 33 | |
199 UDMA_CRC_Error_Count ----CK 100 100 000 - 0 | |
225 Host_Writes_32MiB -O--CK 100 100 000 - 0 | |
226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 65535 | |
227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 65535 | |
228 Workload_Minutes -O--CK 100 100 000 - 65535 | |
232 Available_Reservd_Space PO--CK 100 100 010 - 0 | |
233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 | |
241 Host_Writes_32MiB -O--CK 100 100 000 - 0 | |
242 Host_Reads_32MiB -O--CK 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 1) seconds. | |
Offline data collection | |
capabilities: (0x75) SMART execute Offline immediate. | |
No Auto Offline data collection support. | |
Abort Offline collection upon new | |
command. | |
No Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 1) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 1) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 5 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Available_Reservd_Space": { | |
"attr_name": "Available_Reservd_Space" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "232" , | |
"threshold": "010" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"End_to_End_Error": { | |
"attr_name": "End-to-End_Error" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "184" , | |
"threshold": "090" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Erase_Fail_Count": { | |
"attr_name": "Erase_Fail_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "172" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Host_Reads_32MiB": { | |
"attr_name": "Host_Reads_32MiB" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "242" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Host_Writes_32MiB": { | |
"attr_name": "Host_Writes_32MiB" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "241" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Media_Wearout_Indicator": { | |
"attr_name": "Media_Wearout_Indicator" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "233" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "34" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Program_Fail_Count": { | |
"attr_name": "Program_Fail_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "171" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reported_Uncorrect": { | |
"attr_name": "Reported_Uncorrect" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "187" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reserve_Block_Count": { | |
"attr_name": "Reserve_Block_Count" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "170" , | |
"threshold": "010" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Runtime_Bad_Block": { | |
"attr_name": "Runtime_Bad_Block" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "2" , | |
"smart_id": "183" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "-----K" , | |
"raw_value": "0" , | |
"smart_id": "3" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "0" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Unsafe_Shutdown_Count": { | |
"attr_name": "Unsafe_Shutdown_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "33" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Workld_Host_Reads_Perc": { | |
"attr_name": "Workld_Host_Reads_Perc" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "65535" , | |
"smart_id": "227" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Workld_Media_Wear_Indic": { | |
"attr_name": "Workld_Media_Wear_Indic" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "65535" , | |
"smart_id": "226" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Workload_Minutes": { | |
"attr_name": "Workload_Minutes" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "65535" , | |
"smart_id": "228" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "6998a826-f64b-4595-bafa-537267d98003" , | |
"device_name": "sdm" , | |
"device_node": "/dev/sdm" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "251,059,544,064 bytes [251 GB]" , | |
"model": "WDC WD2502ABYS-01B7A0" , | |
"model_family": "Western Digital RE3 Serial ATA" , | |
"phy_protocol": "SATA" , | |
"serial_no": "WD-WCAT11171165" | |
} , | |
"host_information": { | |
"boot_id": "6998a826-f64b-4595-bafa-537267d98003" , | |
"device_name": "sdm" , | |
"device_node": "/dev/sdm" , | |
"host_ip": "10.0.5.42" , | |
"last_boot_id": "6998a826-f64b-4595-bafa-537267d98003" , | |
"last_host_ip": "10.0.5.42" , | |
"last_known_as": "/dev/sdm" , | |
"last_machine_id": "2b4201c14cb4987011fd320c48f3e189" , | |
"machine_id": "2b4201c14cb4987011fd320c48f3e189" | |
} , | |
"host_ip": "10.0.5.42" , | |
"id": "082142fa-b3b8-42fc-a9bf-44f60a90e514" , | |
"lifetime": 38304000 , | |
"machine_id": "2b4201c14cb4987011fd320c48f3e189" , | |
"model": "WDC WD2502ABYS-01B7A0" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "WD-WCAT11171165" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Model Family: Western Digital RE3 Serial ATA | |
Device Model: WDC WD2502ABYS-01B7A0 | |
Serial Number: WD-WCAT11171165 | |
LU WWN Device Id: 5 0014ee 1abb176db | |
Firmware Version: 02.03B02 | |
User Capacity: 251,059,544,064 bytes [251 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: 8 | |
ATA Standard is: Exact ATA specification draft version not indicated | |
Local Time is: Wed Mar 26 20:34:25 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM level is: 254 (maximum performance), recommended: 128 | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 5 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 6 sectors [Ext. Comprehensive SMART error log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xa0 has 16 sectors [Device vendor specific log] | |
GP/S Log at address 0xa1 has 16 sectors [Device vendor specific log] | |
GP/S Log at address 0xa2 has 16 sectors [Device vendor specific log] | |
GP/S Log at address 0xa3 has 16 sectors [Device vendor specific log] | |
GP/S Log at address 0xa4 has 16 sectors [Device vendor specific log] | |
GP/S Log at address 0xa5 has 16 sectors [Device vendor specific log] | |
GP/S Log at address 0xa6 has 16 sectors [Device vendor specific log] | |
GP/S Log at address 0xa7 has 16 sectors [Device vendor specific log] | |
GP/S Log at address 0xa8 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xa9 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xaa has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xab has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xac has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xad has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xae has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xaf has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xb0 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xb1 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xb2 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xb3 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xb4 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xb5 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xb6 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xb7 has 1 sectors [Device vendor specific log] | |
GP/S Log at address 0xc0 has 1 sectors [Device vendor specific log] | |
GP Log at address 0xc1 has 24 sectors [Device vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x000a 2 6 Device-to-host register FISes sent due to a COMRESET | |
0x8000 4 1206332 Vendor specific | |
" , | |
"sata_sct": "SCT Status Version: 2 | |
SCT Version (vendor specific): 258 (0x0102) | |
SCT Support Level: 1 | |
Device State: SMART Off-line Data Collection executing in background (4) | |
Current Temperature: 30 Celsius | |
Power Cycle Min/Max Temperature: 27/31 Celsius | |
Lifetime Min/Max Temperature: 20/42 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -41/85 Celsius | |
Temperature History Size (Index): 478 (141) | |
Error SMART WRITE LOG does not return COUNT and LBA_LOW register | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
142 2014-03-26 12:37 29 ********** | |
... ..(216 skipped). .. ********** | |
359 2014-03-26 16:14 29 ********** | |
360 2014-03-26 16:15 28 ********* | |
... ..( 82 skipped). .. ********* | |
443 2014-03-26 17:38 28 ********* | |
444 2014-03-26 17:39 29 ********** | |
... ..(143 skipped). .. ********** | |
110 2014-03-26 20:03 29 ********** | |
111 2014-03-26 20:04 30 *********** | |
... ..( 2 skipped). .. *********** | |
114 2014-03-26 20:07 30 *********** | |
115 2014-03-26 20:08 29 ********** | |
... ..( 25 skipped). .. ********** | |
141 2014-03-26 20:34 29 ********** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (6 sectors) | |
Device Error Count: 1 | |
CR = Command Register | |
FEATR = Features Register | |
COUNT = Count (was: Sector Count) Register | |
LBA_48 = Upper bytes of LBA High/Mid/Low Registers ] ATA-8 | |
LH = LBA High (was: Cylinder High) Register ] LBA | |
LM = LBA Mid (was: Cylinder Low) Register ] Register | |
LL = LBA Low (was: Sector Number) Register ] | |
DV = Device (was: Device/Head) Register | |
DC = Device Control Register | |
ER = Error register | |
ST = Status register | |
Powered_Up_Time is measured from power on, and printed as | |
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, | |
SS=sec, and sss=millisec. It "wraps" after 49.710 days. | |
Error 1 [0] occurred at disk power-on lifetime: 9290 hours (387 days + 2 hours) | |
When the command that caused the error occurred, the device was doing SMART Offline or Self-test. | |
After command completion occurred, registers were: | |
ER -- ST COUNT LBA_48 LH LM LL DV DC | |
-- -- -- == -- == == == -- -- -- -- -- | |
10 -- 51 00 00 00 01 9d 00 88 6b 40 00 Error: IDNF at LBA = 0x19d00886b = 6929025131 | |
Commands leading to the command that caused the error were: | |
CR FEATR COUNT LBA_48 LH LM LL DV DC Powered_Up_Time Command/Feature_Name | |
-- == -- == -- == == == -- -- -- -- -- --------------- -------------------- | |
61 00 04 00 00 00 00 01 88 9d 6b 40 00 15d+03:44:15.299 WRITE FPDMA QUEUED | |
61 00 01 00 00 00 00 0a cc 36 bc 40 00 15d+03:44:15.180 WRITE FPDMA QUEUED | |
61 00 03 00 00 00 00 0a cc 36 b8 40 00 15d+03:44:15.180 WRITE FPDMA QUEUED | |
61 00 01 00 00 00 00 0a cc 36 b5 40 00 15d+03:44:15.179 WRITE FPDMA QUEUED | |
61 00 01 00 00 00 00 0a cc 36 ae 40 00 15d+03:44:15.173 WRITE FPDMA QUEUED | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error | |
# 1 Extended offline Completed without error 00% 9611 - | |
# 2 Short offline Completed without error 00% 9404 - | |
# 3 Short offline Completed without error 00% 9398 - | |
# 4 Short offline Completed without error 00% 9392 - | |
# 5 Short offline Completed without error 00% 9386 - | |
# 6 Short offline Completed without error 00% 9380 - | |
# 7 Short offline Completed without error 00% 9374 - | |
# 8 Short offline Completed without error 00% 9368 - | |
# 9 Short offline Completed without error 00% 9362 - | |
#10 Short offline Completed without error 00% 9356 - | |
#11 Short offline Completed without error 00% 9350 - | |
#12 Short offline Completed without error 00% 9344 - | |
#13 Short offline Completed without error 00% 9338 - | |
#14 Short offline Completed without error 00% 9332 - | |
#15 Short offline Completed without error 00% 9326 - | |
#16 Short offline Completed without error 00% 9320 - | |
#17 Short offline Completed without error 00% 9314 - | |
#18 Short offline Completed without error 00% 9308 - | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate POSR-K 200 200 051 - 1676 | |
3 Spin_Up_Time POS--K 160 158 021 - 2991 | |
4 Start_Stop_Count -O--CK 100 100 000 - 49 | |
5 Reallocated_Sector_Ct PO--CK 200 200 140 - 0 | |
7 Seek_Error_Rate -OSR-K 200 200 000 - 0 | |
9 Power_On_Hours -O--CK 086 086 000 - 10640 | |
10 Spin_Retry_Count -O--CK 100 253 000 - 0 | |
11 Calibration_Retry_Count -O--CK 100 253 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 49 | |
192 Power-Off_Retract_Count -O--CK 200 200 000 - 47 | |
193 Load_Cycle_Count -O--CK 200 200 000 - 49 | |
194 Temperature_Celsius -O---K 113 101 000 - 30 | |
196 Reallocated_Event_Count -O--CK 200 200 000 - 0 | |
197 Current_Pending_Sector -O--CK 200 200 000 - 0 | |
198 Offline_Uncorrectable ----CK 200 200 000 - 0 | |
199 UDMA_CRC_Error_Count -O--CK 200 200 000 - 0 | |
200 Multi_Zone_Error_Rate ---R-- 200 200 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x84) Offline data collection activity | |
was suspended by an interrupting command from host. | |
Auto Offline Data Collection: Enabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 4800) seconds. | |
Offline data collection | |
capabilities: (0x7b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 59) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 5) minutes. | |
SCT capabilities: (0x303f) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Calibration_Retry_Count": { | |
"attr_name": "Calibration_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "11" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "253" | |
} , | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "49" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Multi_Zone_Error_Rate": { | |
"attr_name": "Multi_Zone_Error_Rate" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "200" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "49" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "47" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "10640" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "086" , | |
"worst": "086" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "POSR-K" , | |
"raw_value": "1676" , | |
"smart_id": "1" , | |
"threshold": "051" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "140" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "-OSR-K" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "253" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS--K" , | |
"raw_value": "2991" , | |
"smart_id": "3" , | |
"threshold": "021" , | |
"value": "160" , | |
"worst": "158" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "49" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "30" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "113" , | |
"worst": "101" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"device_name": "sds" , | |
"device_node": "/dev/sds" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824262C5T37D" | |
} , | |
"host_information": { | |
"boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"device_name": "sds" , | |
"device_node": "/dev/sds" , | |
"host_ip": "10.0.5.45" , | |
"last_boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"last_host_ip": "10.0.5.45" , | |
"last_known_as": "/dev/sds" , | |
"last_machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" | |
} , | |
"host_ip": "10.0.5.45" , | |
"id": "099eb408-0f71-4fbe-bdc0-6c7576a380bf" , | |
"lifetime": 64800 , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824262C5T37D" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824262C5T37D | |
LU WWN Device Id: 5 000cca 6d3c2a057 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 21:05:36 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 20/24 Celsius | |
Lifetime Min/Max Temperature: 20/54 Celsius | |
Lifetime Average Temperature: 45 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (94) | |
SCT Error Recovery Control: | |
Read: Disabled | |
Write: Disabled | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
95 2014-03-26 18:58 49 ****************************** | |
96 2014-03-26 18:59 48 ***************************** | |
... ..( 2 skipped). .. ***************************** | |
99 2014-03-26 19:02 48 ***************************** | |
100 2014-03-26 19:03 49 ****************************** | |
101 2014-03-26 19:04 49 ****************************** | |
102 2014-03-26 19:05 50 ******************************* | |
103 2014-03-26 19:06 51 ******************************** | |
104 2014-03-26 19:07 52 ********************************* | |
105 2014-03-26 19:08 52 ********************************* | |
106 2014-03-26 19:09 52 ********************************* | |
107 2014-03-26 19:10 51 ******************************** | |
108 2014-03-26 19:11 50 ******************************* | |
... ..( 3 skipped). .. ******************************* | |
112 2014-03-26 19:15 50 ******************************* | |
113 2014-03-26 19:16 49 ****************************** | |
... ..( 4 skipped). .. ****************************** | |
118 2014-03-26 19:21 49 ****************************** | |
119 2014-03-26 19:22 48 ***************************** | |
... ..( 14 skipped). .. ***************************** | |
6 2014-03-26 19:37 48 ***************************** | |
7 2014-03-26 19:38 47 **************************** | |
8 2014-03-26 19:39 48 ***************************** | |
9 2014-03-26 19:40 47 **************************** | |
... ..( 3 skipped). .. **************************** | |
13 2014-03-26 19:44 47 **************************** | |
14 2014-03-26 19:45 48 ***************************** | |
15 2014-03-26 19:46 48 ***************************** | |
16 2014-03-26 19:47 49 ****************************** | |
... ..( 4 skipped). .. ****************************** | |
21 2014-03-26 19:52 49 ****************************** | |
22 2014-03-26 19:53 50 ******************************* | |
... ..( 3 skipped). .. ******************************* | |
26 2014-03-26 19:57 50 ******************************* | |
27 2014-03-26 19:58 44 ************************* | |
28 2014-03-26 19:59 38 ******************* | |
29 2014-03-26 20:00 36 ***************** | |
30 2014-03-26 20:01 35 **************** | |
31 2014-03-26 20:02 34 *************** | |
32 2014-03-26 20:03 33 ************** | |
33 2014-03-26 20:04 33 ************** | |
34 2014-03-26 20:05 32 ************* | |
... ..( 4 skipped). .. ************* | |
39 2014-03-26 20:10 32 ************* | |
40 2014-03-26 20:11 31 ************ | |
41 2014-03-26 20:12 32 ************* | |
42 2014-03-26 20:13 32 ************* | |
43 2014-03-26 20:14 ? - | |
44 2014-03-26 20:15 23 **** | |
45 2014-03-26 20:16 24 ***** | |
46 2014-03-26 20:17 24 ***** | |
47 2014-03-26 20:18 25 ****** | |
48 2014-03-26 20:19 26 ******* | |
... ..( 3 skipped). .. ******* | |
52 2014-03-26 20:23 26 ******* | |
53 2014-03-26 20:24 ? - | |
54 2014-03-26 20:25 27 ******** | |
55 2014-03-26 20:26 27 ******** | |
56 2014-03-26 20:27 27 ******** | |
57 2014-03-26 20:28 28 ********* | |
58 2014-03-26 20:29 28 ********* | |
59 2014-03-26 20:30 29 ********** | |
... ..( 2 skipped). .. ********** | |
62 2014-03-26 20:33 29 ********** | |
63 2014-03-26 20:34 30 *********** | |
... ..( 9 skipped). .. *********** | |
73 2014-03-26 20:44 30 *********** | |
74 2014-03-26 20:45 ? - | |
75 2014-03-26 20:46 30 *********** | |
... ..( 2 skipped). .. *********** | |
78 2014-03-26 20:49 30 *********** | |
79 2014-03-26 20:50 ? - | |
80 2014-03-26 20:51 30 *********** | |
81 2014-03-26 20:52 29 ********** | |
82 2014-03-26 20:53 30 *********** | |
83 2014-03-26 20:54 30 *********** | |
84 2014-03-26 20:55 30 *********** | |
85 2014-03-26 20:56 ? - | |
86 2014-03-26 20:57 21 ** | |
87 2014-03-26 20:58 22 *** | |
88 2014-03-26 20:59 22 *** | |
89 2014-03-26 21:00 23 **** | |
... ..( 3 skipped). .. **** | |
93 2014-03-26 21:04 23 **** | |
94 2014-03-26 21:05 24 ***** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 14 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 18 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 12 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 10 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 14 | |
194 Temperature_Celsius -O---- 250 250 000 - 24 (Min/Max 20/54) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 68) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "14" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "12" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "10" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "18" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "14" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "24" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "250" , | |
"worst": "250" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"device_name": "sdae" , | |
"device_node": "/dev/sdae" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E382456202XVTN" | |
} , | |
"host_information": { | |
"boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"device_name": "sdae" , | |
"device_node": "/dev/sdae" , | |
"host_ip": "10.0.5.50" , | |
"last_boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"last_host_ip": "10.0.5.50" , | |
"last_known_as": "/dev/sdae" , | |
"last_machine_id": "300a76492cf73e527d61b3e849efde1b" , | |
"machine_id": "300a76492cf73e527d61b3e849efde1b" | |
} , | |
"host_ip": "10.0.5.50" , | |
"id": "0d78a945-21c0-427f-a2c4-f8c5324337b3" , | |
"lifetime": 64800 , | |
"machine_id": "300a76492cf73e527d61b3e849efde1b" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E382456202XVTN" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E382456202XVTN | |
LU WWN Device Id: 5 000cca 6dbc15518 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 22:45:43 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 128 (minimum power consumption without standby) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 25 Celsius | |
Power Cycle Min/Max Temperature: 22/25 Celsius | |
Lifetime Min/Max Temperature: 22/56 Celsius | |
Lifetime Average Temperature: 46 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (104) | |
SCT Error Recovery Control: | |
Read: 255 (25.5 seconds) | |
Write: Disabled | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
105 2014-03-26 20:38 51 ******************************** | |
106 2014-03-26 20:39 53 ********************************** | |
107 2014-03-26 20:40 54 *********************************** | |
108 2014-03-26 20:41 55 ************************************ | |
109 2014-03-26 20:42 55 ************************************ | |
110 2014-03-26 20:43 54 *********************************** | |
111 2014-03-26 20:44 53 ********************************** | |
112 2014-03-26 20:45 53 ********************************** | |
113 2014-03-26 20:46 52 ********************************* | |
114 2014-03-26 20:47 52 ********************************* | |
115 2014-03-26 20:48 51 ******************************** | |
116 2014-03-26 20:49 52 ********************************* | |
117 2014-03-26 20:50 51 ******************************** | |
... ..( 2 skipped). .. ******************************** | |
120 2014-03-26 20:53 51 ******************************** | |
121 2014-03-26 20:54 50 ******************************* | |
122 2014-03-26 20:55 51 ******************************** | |
123 2014-03-26 20:56 51 ******************************** | |
124 2014-03-26 20:57 52 ********************************* | |
125 2014-03-26 20:58 51 ******************************** | |
126 2014-03-26 20:59 52 ********************************* | |
127 2014-03-26 21:00 51 ******************************** | |
0 2014-03-26 21:01 52 ********************************* | |
1 2014-03-26 21:02 52 ********************************* | |
2 2014-03-26 21:03 52 ********************************* | |
3 2014-03-26 21:04 51 ******************************** | |
... ..( 20 skipped). .. ******************************** | |
24 2014-03-26 21:25 51 ******************************** | |
25 2014-03-26 21:26 50 ******************************* | |
... ..( 3 skipped). .. ******************************* | |
29 2014-03-26 21:30 50 ******************************* | |
30 2014-03-26 21:31 45 ************************** | |
31 2014-03-26 21:32 39 ******************** | |
32 2014-03-26 21:33 37 ****************** | |
33 2014-03-26 21:34 35 **************** | |
34 2014-03-26 21:35 35 **************** | |
35 2014-03-26 21:36 34 *************** | |
36 2014-03-26 21:37 34 *************** | |
37 2014-03-26 21:38 33 ************** | |
38 2014-03-26 21:39 33 ************** | |
39 2014-03-26 21:40 33 ************** | |
40 2014-03-26 21:41 32 ************* | |
... ..( 2 skipped). .. ************* | |
43 2014-03-26 21:44 32 ************* | |
44 2014-03-26 21:45 ? - | |
45 2014-03-26 21:46 24 ***** | |
46 2014-03-26 21:47 25 ****** | |
47 2014-03-26 21:48 25 ****** | |
48 2014-03-26 21:49 26 ******* | |
49 2014-03-26 21:50 27 ******** | |
... ..( 4 skipped). .. ******** | |
54 2014-03-26 21:55 27 ******** | |
55 2014-03-26 21:56 ? - | |
56 2014-03-26 21:57 27 ******** | |
57 2014-03-26 21:58 28 ********* | |
58 2014-03-26 21:59 28 ********* | |
59 2014-03-26 22:00 29 ********** | |
... ..( 2 skipped). .. ********** | |
62 2014-03-26 22:03 29 ********** | |
63 2014-03-26 22:04 30 *********** | |
... ..( 2 skipped). .. *********** | |
66 2014-03-26 22:07 30 *********** | |
67 2014-03-26 22:08 31 ************ | |
68 2014-03-26 22:09 30 *********** | |
69 2014-03-26 22:10 30 *********** | |
70 2014-03-26 22:11 31 ************ | |
... ..( 15 skipped). .. ************ | |
86 2014-03-26 22:27 31 ************ | |
87 2014-03-26 22:28 ? - | |
88 2014-03-26 22:29 30 *********** | |
... ..( 2 skipped). .. *********** | |
91 2014-03-26 22:32 30 *********** | |
92 2014-03-26 22:33 ? - | |
93 2014-03-26 22:34 30 *********** | |
... ..( 4 skipped). .. *********** | |
98 2014-03-26 22:39 30 *********** | |
99 2014-03-26 22:40 ? - | |
100 2014-03-26 22:41 23 **** | |
101 2014-03-26 22:42 23 **** | |
102 2014-03-26 22:43 24 ***** | |
103 2014-03-26 22:44 24 ***** | |
104 2014-03-26 22:45 25 ****** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 14 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 18 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 12 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 10 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 14 | |
194 Temperature_Celsius -O---- 240 240 000 - 25 (Min/Max 22/56) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 62) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "14" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "12" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "10" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "18" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "14" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "25" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "240" , | |
"worst": "240" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "2555c20b-6f7f-4c7d-8a4c-8e53df6e567f" , | |
"device_name": "sdv" , | |
"device_node": "/dev/sdv" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E18G4263CMNT0D" | |
} , | |
"host_information": { | |
"boot_id": "2555c20b-6f7f-4c7d-8a4c-8e53df6e567f" , | |
"device_name": "sdv" , | |
"device_node": "/dev/sdv" , | |
"host_ip": "10.0.5.51" , | |
"last_boot_id": "2555c20b-6f7f-4c7d-8a4c-8e53df6e567f" , | |
"last_host_ip": "10.0.5.51" , | |
"last_known_as": "/dev/sdv" , | |
"last_machine_id": "3844bf17de8c06f75ff5fcc94bd62999" , | |
"machine_id": "3844bf17de8c06f75ff5fcc94bd62999" | |
} , | |
"host_ip": "10.0.5.51" , | |
"id": "1179e2b4-b03c-4e44-996b-c7494db2e386" , | |
"lifetime": 68400 , | |
"machine_id": "3844bf17de8c06f75ff5fcc94bd62999" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E18G4263CMNT0D" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E18G4263CMNT0D | |
LU WWN Device Id: 5 000cca 6d4c8f109 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 18:34:43 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 23 Celsius | |
Power Cycle Min/Max Temperature: 20/23 Celsius | |
Lifetime Min/Max Temperature: 20/46 Celsius | |
Lifetime Average Temperature: 39 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (48) | |
Error SMART WRITE LOG does not return COUNT and LBA_LOW register | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
49 2014-03-26 16:27 32 ************* | |
... ..( 5 skipped). .. ************* | |
55 2014-03-26 16:33 32 ************* | |
56 2014-03-26 16:34 ? - | |
57 2014-03-26 16:35 25 ****** | |
58 2014-03-26 16:36 25 ****** | |
59 2014-03-26 16:37 26 ******* | |
60 2014-03-26 16:38 27 ******** | |
61 2014-03-26 16:39 ? - | |
62 2014-03-26 16:40 27 ******** | |
63 2014-03-26 16:41 28 ********* | |
64 2014-03-26 16:42 29 ********** | |
65 2014-03-26 16:43 29 ********** | |
66 2014-03-26 16:44 30 *********** | |
... ..( 3 skipped). .. *********** | |
70 2014-03-26 16:48 30 *********** | |
71 2014-03-26 16:49 31 ************ | |
... ..( 9 skipped). .. ************ | |
81 2014-03-26 16:59 31 ************ | |
82 2014-03-26 17:00 ? - | |
83 2014-03-26 17:01 31 ************ | |
... ..( 2 skipped). .. ************ | |
86 2014-03-26 17:04 31 ************ | |
87 2014-03-26 17:05 ? - | |
88 2014-03-26 17:06 30 *********** | |
89 2014-03-26 17:07 31 ************ | |
90 2014-03-26 17:08 31 ************ | |
91 2014-03-26 17:09 ? - | |
92 2014-03-26 17:10 24 ***** | |
93 2014-03-26 17:11 25 ****** | |
94 2014-03-26 17:12 26 ******* | |
95 2014-03-26 17:13 ? - | |
96 2014-03-26 17:14 27 ******** | |
97 2014-03-26 17:15 27 ******** | |
98 2014-03-26 17:16 27 ******** | |
99 2014-03-26 17:17 28 ********* | |
100 2014-03-26 17:18 ? - | |
101 2014-03-26 17:19 28 ********* | |
102 2014-03-26 17:20 28 ********* | |
103 2014-03-26 17:21 28 ********* | |
104 2014-03-26 17:22 29 ********** | |
105 2014-03-26 17:23 29 ********** | |
106 2014-03-26 17:24 29 ********** | |
107 2014-03-26 17:25 30 *********** | |
... ..( 4 skipped). .. *********** | |
112 2014-03-26 17:30 30 *********** | |
113 2014-03-26 17:31 31 ************ | |
... ..( 10 skipped). .. ************ | |
124 2014-03-26 17:42 31 ************ | |
125 2014-03-26 17:43 30 *********** | |
126 2014-03-26 17:44 29 ********** | |
... ..( 3 skipped). .. ********** | |
2 2014-03-26 17:48 29 ********** | |
3 2014-03-26 17:49 ? - | |
4 2014-03-26 17:50 29 ********** | |
5 2014-03-26 17:51 29 ********** | |
6 2014-03-26 17:52 29 ********** | |
7 2014-03-26 17:53 ? - | |
8 2014-03-26 17:54 29 ********** | |
9 2014-03-26 17:55 29 ********** | |
10 2014-03-26 17:56 30 *********** | |
11 2014-03-26 17:57 29 ********** | |
12 2014-03-26 17:58 ? - | |
13 2014-03-26 17:59 24 ***** | |
14 2014-03-26 18:00 26 ******* | |
15 2014-03-26 18:01 27 ******** | |
16 2014-03-26 18:02 ? - | |
17 2014-03-26 18:03 28 ********* | |
18 2014-03-26 18:04 27 ******** | |
19 2014-03-26 18:05 28 ********* | |
20 2014-03-26 18:06 28 ********* | |
21 2014-03-26 18:07 ? - | |
22 2014-03-26 18:08 29 ********** | |
23 2014-03-26 18:09 29 ********** | |
24 2014-03-26 18:10 30 *********** | |
25 2014-03-26 18:11 30 *********** | |
26 2014-03-26 18:12 31 ************ | |
27 2014-03-26 18:13 30 *********** | |
28 2014-03-26 18:14 31 ************ | |
... ..( 3 skipped). .. ************ | |
32 2014-03-26 18:18 31 ************ | |
33 2014-03-26 18:19 ? - | |
34 2014-03-26 18:20 31 ************ | |
35 2014-03-26 18:21 31 ************ | |
36 2014-03-26 18:22 31 ************ | |
37 2014-03-26 18:23 ? - | |
38 2014-03-26 18:24 31 ************ | |
39 2014-03-26 18:25 31 ************ | |
40 2014-03-26 18:26 31 ************ | |
41 2014-03-26 18:27 ? - | |
42 2014-03-26 18:28 21 ** | |
43 2014-03-26 18:29 22 *** | |
... ..( 2 skipped). .. *** | |
46 2014-03-26 18:32 22 *** | |
47 2014-03-26 18:33 23 **** | |
48 2014-03-26 18:34 23 **** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 222 222 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 27 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 19 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 25 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 22 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 1283 | |
194 Temperature_Celsius -O---- 253 253 000 - 23 (Min/Max 20/46) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 60) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "1283" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "25" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "22" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "19" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "222" , | |
"worst": "222" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "27" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "23" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"device_name": "sdab" , | |
"device_node": "/dev/sdab" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E382456202XX6N" | |
} , | |
"host_information": { | |
"boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"device_name": "sdab" , | |
"device_node": "/dev/sdab" , | |
"host_ip": "10.0.5.46" , | |
"last_boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"last_host_ip": "10.0.5.46" , | |
"last_known_as": "/dev/sdab" , | |
"last_machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" , | |
"machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" | |
} , | |
"host_ip": "10.0.5.46" , | |
"id": "161e2980-ee6c-4557-b112-ae24f3e47cca" , | |
"lifetime": 68400 , | |
"machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E382456202XX6N" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E382456202XX6N | |
LU WWN Device Id: 5 000cca 6dbc15544 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 22:08:02 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 128 (minimum power consumption without standby) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 23 Celsius | |
Power Cycle Min/Max Temperature: 20/23 Celsius | |
Lifetime Min/Max Temperature: 20/63 Celsius | |
Lifetime Average Temperature: 45 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (9) | |
Error SMART WRITE LOG does not return COUNT and LBA_LOW register | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
10 2014-03-26 20:01 49 ****************************** | |
... ..( 11 skipped). .. ****************************** | |
22 2014-03-26 20:13 49 ****************************** | |
23 2014-03-26 20:14 48 ***************************** | |
... ..( 4 skipped). .. ***************************** | |
28 2014-03-26 20:19 48 ***************************** | |
29 2014-03-26 20:20 44 ************************* | |
30 2014-03-26 20:21 38 ******************* | |
31 2014-03-26 20:22 36 ***************** | |
32 2014-03-26 20:23 34 *************** | |
33 2014-03-26 20:24 33 ************** | |
34 2014-03-26 20:25 33 ************** | |
35 2014-03-26 20:26 33 ************** | |
36 2014-03-26 20:27 32 ************* | |
... ..( 6 skipped). .. ************* | |
43 2014-03-26 20:34 32 ************* | |
44 2014-03-26 20:35 ? - | |
45 2014-03-26 20:36 25 ****** | |
46 2014-03-26 20:37 25 ****** | |
47 2014-03-26 20:38 26 ******* | |
48 2014-03-26 20:39 26 ******* | |
49 2014-03-26 20:40 26 ******* | |
50 2014-03-26 20:41 27 ******** | |
... ..( 2 skipped). .. ******** | |
53 2014-03-26 20:44 27 ******** | |
54 2014-03-26 20:45 28 ********* | |
55 2014-03-26 20:46 ? - | |
56 2014-03-26 20:47 27 ******** | |
... ..( 2 skipped). .. ******** | |
59 2014-03-26 20:50 27 ******** | |
60 2014-03-26 20:51 28 ********* | |
... ..( 2 skipped). .. ********* | |
63 2014-03-26 20:54 28 ********* | |
64 2014-03-26 20:55 27 ******** | |
65 2014-03-26 20:56 27 ******** | |
66 2014-03-26 20:57 ? - | |
67 2014-03-26 20:58 28 ********* | |
68 2014-03-26 20:59 28 ********* | |
69 2014-03-26 21:00 28 ********* | |
70 2014-03-26 21:01 29 ********** | |
... ..( 2 skipped). .. ********** | |
73 2014-03-26 21:04 29 ********** | |
74 2014-03-26 21:05 30 *********** | |
... ..( 4 skipped). .. *********** | |
79 2014-03-26 21:10 30 *********** | |
80 2014-03-26 21:11 31 ************ | |
... ..( 22 skipped). .. ************ | |
103 2014-03-26 21:34 31 ************ | |
104 2014-03-26 21:35 30 *********** | |
105 2014-03-26 21:36 31 ************ | |
106 2014-03-26 21:37 30 *********** | |
... ..( 2 skipped). .. *********** | |
109 2014-03-26 21:40 30 *********** | |
110 2014-03-26 21:41 31 ************ | |
111 2014-03-26 21:42 30 *********** | |
... ..( 2 skipped). .. *********** | |
114 2014-03-26 21:45 30 *********** | |
115 2014-03-26 21:46 ? - | |
116 2014-03-26 21:47 30 *********** | |
... ..( 2 skipped). .. *********** | |
119 2014-03-26 21:50 30 *********** | |
120 2014-03-26 21:51 31 ************ | |
121 2014-03-26 21:52 30 *********** | |
122 2014-03-26 21:53 31 ************ | |
123 2014-03-26 21:54 30 *********** | |
124 2014-03-26 21:55 31 ************ | |
125 2014-03-26 21:56 30 *********** | |
126 2014-03-26 21:57 ? - | |
127 2014-03-26 21:58 30 *********** | |
0 2014-03-26 21:59 29 ********** | |
1 2014-03-26 22:00 30 *********** | |
2 2014-03-26 22:01 30 *********** | |
3 2014-03-26 22:02 30 *********** | |
4 2014-03-26 22:03 ? - | |
5 2014-03-26 22:04 21 ** | |
6 2014-03-26 22:05 22 *** | |
7 2014-03-26 22:06 22 *** | |
8 2014-03-26 22:07 23 **** | |
9 2014-03-26 22:08 23 **** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 15 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 19 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 13 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 9 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 590 | |
194 Temperature_Celsius -O---- 253 253 000 - 23 (Min/Max 20/63) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 62) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "590" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "13" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "9" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "19" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "15" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "23" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"device_name": "sdy" , | |
"device_node": "/dev/sdy" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E18G4263CMXV3D" | |
} , | |
"host_information": { | |
"boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"device_name": "sdy" , | |
"device_node": "/dev/sdy" , | |
"host_ip": "10.0.5.45" , | |
"last_boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"last_host_ip": "10.0.5.45" , | |
"last_known_as": "/dev/sdy" , | |
"last_machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" | |
} , | |
"host_ip": "10.0.5.45" , | |
"id": "236ea5e4-a4d2-41fd-9083-bbe7945829cd" , | |
"lifetime": 64800 , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E18G4263CMXV3D" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E18G4263CMXV3D | |
LU WWN Device Id: 5 000cca 6d4c90f52 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 21:06:13 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 20/24 Celsius | |
Lifetime Min/Max Temperature: 20/46 Celsius | |
Lifetime Average Temperature: 39 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (101) | |
Error Write SCT (Get) Error Recovery Control Command failed: scsi error unsupported scsi opcode | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
102 2014-03-26 18:59 41 ********************** | |
103 2014-03-26 19:00 41 ********************** | |
104 2014-03-26 19:01 42 *********************** | |
105 2014-03-26 19:02 41 ********************** | |
106 2014-03-26 19:03 41 ********************** | |
107 2014-03-26 19:04 40 ********************* | |
108 2014-03-26 19:05 40 ********************* | |
109 2014-03-26 19:06 40 ********************* | |
110 2014-03-26 19:07 39 ******************** | |
111 2014-03-26 19:08 40 ********************* | |
112 2014-03-26 19:09 40 ********************* | |
113 2014-03-26 19:10 41 ********************** | |
114 2014-03-26 19:11 42 *********************** | |
115 2014-03-26 19:12 42 *********************** | |
116 2014-03-26 19:13 42 *********************** | |
117 2014-03-26 19:14 41 ********************** | |
118 2014-03-26 19:15 42 *********************** | |
119 2014-03-26 19:16 41 ********************** | |
120 2014-03-26 19:17 43 ************************ | |
121 2014-03-26 19:18 42 *********************** | |
122 2014-03-26 19:19 43 ************************ | |
123 2014-03-26 19:20 43 ************************ | |
124 2014-03-26 19:21 42 *********************** | |
125 2014-03-26 19:22 43 ************************ | |
... ..( 2 skipped). .. ************************ | |
0 2014-03-26 19:25 43 ************************ | |
1 2014-03-26 19:26 42 *********************** | |
2 2014-03-26 19:27 43 ************************ | |
3 2014-03-26 19:28 43 ************************ | |
4 2014-03-26 19:29 42 *********************** | |
5 2014-03-26 19:30 42 *********************** | |
6 2014-03-26 19:31 43 ************************ | |
7 2014-03-26 19:32 43 ************************ | |
8 2014-03-26 19:33 43 ************************ | |
9 2014-03-26 19:34 44 ************************* | |
... ..( 2 skipped). .. ************************* | |
12 2014-03-26 19:37 44 ************************* | |
13 2014-03-26 19:38 43 ************************ | |
14 2014-03-26 19:39 43 ************************ | |
15 2014-03-26 19:40 42 *********************** | |
16 2014-03-26 19:41 43 ************************ | |
17 2014-03-26 19:42 42 *********************** | |
... ..( 7 skipped). .. *********************** | |
25 2014-03-26 19:50 42 *********************** | |
26 2014-03-26 19:51 43 ************************ | |
27 2014-03-26 19:52 42 *********************** | |
28 2014-03-26 19:53 43 ************************ | |
... ..( 2 skipped). .. ************************ | |
31 2014-03-26 19:56 43 ************************ | |
32 2014-03-26 19:57 42 *********************** | |
... ..( 3 skipped). .. *********************** | |
36 2014-03-26 20:01 42 *********************** | |
37 2014-03-26 20:02 41 ********************** | |
... ..( 3 skipped). .. ********************** | |
41 2014-03-26 20:06 41 ********************** | |
42 2014-03-26 20:07 39 ******************** | |
43 2014-03-26 20:08 35 **************** | |
44 2014-03-26 20:09 33 ************** | |
45 2014-03-26 20:10 31 ************ | |
... ..( 3 skipped). .. ************ | |
49 2014-03-26 20:14 31 ************ | |
50 2014-03-26 20:15 32 ************* | |
... ..( 6 skipped). .. ************* | |
57 2014-03-26 20:22 32 ************* | |
58 2014-03-26 20:23 ? - | |
59 2014-03-26 20:24 24 ***** | |
60 2014-03-26 20:25 25 ****** | |
61 2014-03-26 20:26 26 ******* | |
62 2014-03-26 20:27 27 ******** | |
63 2014-03-26 20:28 ? - | |
64 2014-03-26 20:29 28 ********* | |
65 2014-03-26 20:30 28 ********* | |
66 2014-03-26 20:31 29 ********** | |
67 2014-03-26 20:32 29 ********** | |
68 2014-03-26 20:33 30 *********** | |
69 2014-03-26 20:34 30 *********** | |
70 2014-03-26 20:35 30 *********** | |
71 2014-03-26 20:36 31 ************ | |
... ..( 4 skipped). .. ************ | |
76 2014-03-26 20:41 31 ************ | |
77 2014-03-26 20:42 ? - | |
78 2014-03-26 20:43 31 ************ | |
79 2014-03-26 20:44 30 *********** | |
80 2014-03-26 20:45 31 ************ | |
81 2014-03-26 20:46 31 ************ | |
82 2014-03-26 20:47 31 ************ | |
83 2014-03-26 20:48 30 *********** | |
... ..( 2 skipped). .. *********** | |
86 2014-03-26 20:51 30 *********** | |
87 2014-03-26 20:52 ? - | |
88 2014-03-26 20:53 29 ********** | |
89 2014-03-26 20:54 30 *********** | |
90 2014-03-26 20:55 30 *********** | |
91 2014-03-26 20:56 ? - | |
92 2014-03-26 20:57 21 ** | |
93 2014-03-26 20:58 21 ** | |
94 2014-03-26 20:59 22 *** | |
95 2014-03-26 21:00 23 **** | |
... ..( 2 skipped). .. **** | |
98 2014-03-26 21:03 23 **** | |
99 2014-03-26 21:04 24 ***** | |
100 2014-03-26 21:05 24 ***** | |
101 2014-03-26 21:06 24 ***** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 18 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 18 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 16 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 13 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 18 | |
194 Temperature_Celsius -O---- 250 250 000 - 24 (Min/Max 20/46) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 68) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "18" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "16" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "13" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "18" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "18" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "24" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "250" , | |
"worst": "250" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"device_name": "sdo" , | |
"device_node": "/dev/sdo" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E18G4263CNPR5D" | |
} , | |
"host_information": { | |
"boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"device_name": "sdo" , | |
"device_node": "/dev/sdo" , | |
"host_ip": "10.0.5.46" , | |
"last_boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"last_host_ip": "10.0.5.46" , | |
"last_known_as": "/dev/sdo" , | |
"last_machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" , | |
"machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" | |
} , | |
"host_ip": "10.0.5.46" , | |
"id": "276fe4ba-a046-432a-a45d-b3e7c97ad2f9" , | |
"lifetime": 68400 , | |
"machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E18G4263CNPR5D" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E18G4263CNPR5D | |
LU WWN Device Id: 5 000cca 6d4c968f0 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 22:08:57 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 21/24 Celsius | |
Lifetime Min/Max Temperature: 21/46 Celsius | |
Lifetime Average Temperature: 39 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (32) | |
SCT Error Recovery Control: | |
Read: Disabled | |
Write: Disabled | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
33 2014-03-26 20:01 42 *********************** | |
... ..( 4 skipped). .. *********************** | |
38 2014-03-26 20:06 42 *********************** | |
39 2014-03-26 20:07 41 ********************** | |
40 2014-03-26 20:08 36 ***************** | |
41 2014-03-26 20:09 34 *************** | |
42 2014-03-26 20:10 33 ************** | |
43 2014-03-26 20:11 32 ************* | |
44 2014-03-26 20:12 31 ************ | |
... ..( 5 skipped). .. ************ | |
50 2014-03-26 20:18 31 ************ | |
51 2014-03-26 20:19 32 ************* | |
52 2014-03-26 20:20 32 ************* | |
53 2014-03-26 20:21 32 ************* | |
54 2014-03-26 20:22 ? - | |
55 2014-03-26 20:23 26 ******* | |
56 2014-03-26 20:24 26 ******* | |
57 2014-03-26 20:25 27 ******** | |
58 2014-03-26 20:26 27 ******** | |
59 2014-03-26 20:27 ? - | |
60 2014-03-26 20:28 28 ********* | |
61 2014-03-26 20:29 28 ********* | |
62 2014-03-26 20:30 29 ********** | |
63 2014-03-26 20:31 29 ********** | |
64 2014-03-26 20:32 30 *********** | |
... ..( 2 skipped). .. *********** | |
67 2014-03-26 20:35 30 *********** | |
68 2014-03-26 20:36 31 ************ | |
... ..( 3 skipped). .. ************ | |
72 2014-03-26 20:40 31 ************ | |
73 2014-03-26 20:41 ? - | |
74 2014-03-26 20:42 31 ************ | |
75 2014-03-26 20:43 30 *********** | |
76 2014-03-26 20:44 31 ************ | |
77 2014-03-26 20:45 ? - | |
78 2014-03-26 20:46 30 *********** | |
79 2014-03-26 20:47 31 ************ | |
80 2014-03-26 20:48 31 ************ | |
81 2014-03-26 20:49 ? - | |
82 2014-03-26 20:50 24 ***** | |
83 2014-03-26 20:51 25 ****** | |
84 2014-03-26 20:52 26 ******* | |
85 2014-03-26 20:53 ? - | |
86 2014-03-26 20:54 27 ******** | |
... ..( 2 skipped). .. ******** | |
89 2014-03-26 20:57 27 ******** | |
90 2014-03-26 20:58 ? - | |
91 2014-03-26 20:59 27 ******** | |
92 2014-03-26 21:00 28 ********* | |
93 2014-03-26 21:01 29 ********** | |
... ..( 3 skipped). .. ********** | |
97 2014-03-26 21:05 29 ********** | |
98 2014-03-26 21:06 30 *********** | |
... ..( 3 skipped). .. *********** | |
102 2014-03-26 21:10 30 *********** | |
103 2014-03-26 21:11 31 ************ | |
104 2014-03-26 21:12 30 *********** | |
105 2014-03-26 21:13 30 *********** | |
106 2014-03-26 21:14 30 *********** | |
107 2014-03-26 21:15 31 ************ | |
108 2014-03-26 21:16 ? - | |
109 2014-03-26 21:17 30 *********** | |
110 2014-03-26 21:18 30 *********** | |
111 2014-03-26 21:19 30 *********** | |
112 2014-03-26 21:20 ? - | |
113 2014-03-26 21:21 30 *********** | |
114 2014-03-26 21:22 30 *********** | |
115 2014-03-26 21:23 30 *********** | |
116 2014-03-26 21:24 ? - | |
117 2014-03-26 21:25 25 ****** | |
118 2014-03-26 21:26 26 ******* | |
119 2014-03-26 21:27 27 ******** | |
120 2014-03-26 21:28 ? - | |
121 2014-03-26 21:29 28 ********* | |
122 2014-03-26 21:30 28 ********* | |
123 2014-03-26 21:31 28 ********* | |
124 2014-03-26 21:32 29 ********** | |
125 2014-03-26 21:33 ? - | |
126 2014-03-26 21:34 29 ********** | |
127 2014-03-26 21:35 29 ********** | |
0 2014-03-26 21:36 30 *********** | |
1 2014-03-26 21:37 30 *********** | |
2 2014-03-26 21:38 31 ************ | |
... ..( 3 skipped). .. ************ | |
6 2014-03-26 21:42 31 ************ | |
7 2014-03-26 21:43 32 ************* | |
... ..( 9 skipped). .. ************* | |
17 2014-03-26 21:53 32 ************* | |
18 2014-03-26 21:54 ? - | |
19 2014-03-26 21:55 32 ************* | |
20 2014-03-26 21:56 32 ************* | |
21 2014-03-26 21:57 32 ************* | |
22 2014-03-26 21:58 ? - | |
23 2014-03-26 21:59 31 ************ | |
24 2014-03-26 22:00 31 ************ | |
25 2014-03-26 22:01 31 ************ | |
26 2014-03-26 22:02 32 ************* | |
27 2014-03-26 22:03 ? - | |
28 2014-03-26 22:04 21 ** | |
29 2014-03-26 22:05 22 *** | |
30 2014-03-26 22:06 23 **** | |
31 2014-03-26 22:07 23 **** | |
32 2014-03-26 22:08 24 ***** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 235 235 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 31 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 19 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 29 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 27 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 31 | |
194 Temperature_Celsius -O---- 250 250 000 - 24 (Min/Max 21/46) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 67) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "31" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "29" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "27" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "19" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "235" , | |
"worst": "235" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "31" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "24" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "250" , | |
"worst": "250" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "f371b291-08cb-471d-98a8-b82a5d8edae3" , | |
"device_name": "sdy" , | |
"device_node": "/dev/sdy" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824262C9BN3D" | |
} , | |
"host_information": { | |
"boot_id": "f371b291-08cb-471d-98a8-b82a5d8edae3" , | |
"device_name": "sdy" , | |
"device_node": "/dev/sdy" , | |
"host_ip": "10.0.5.52" , | |
"last_boot_id": "f371b291-08cb-471d-98a8-b82a5d8edae3" , | |
"last_host_ip": "10.0.5.52" , | |
"last_known_as": "/dev/sdy" , | |
"last_machine_id": "e6ef0a82acee8841da89d6b14a231869" , | |
"machine_id": "e6ef0a82acee8841da89d6b14a231869" | |
} , | |
"host_ip": "10.0.5.52" , | |
"id": "29f1ed62-cd23-4df8-bd68-9231d59d19d4" , | |
"lifetime": 68400 , | |
"machine_id": "e6ef0a82acee8841da89d6b14a231869" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824262C9BN3D" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824262C9BN3D | |
LU WWN Device Id: 5 000cca 6d3c44311 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 20:30:04 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 20/25 Celsius | |
Lifetime Min/Max Temperature: 20/59 Celsius | |
Lifetime Average Temperature: 44 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (3) | |
Error Write SCT (Get) Error Recovery Control Command failed: scsi error unsupported field in scsi command | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
4 2014-03-26 18:23 49 ****************************** | |
... ..( 18 skipped). .. ****************************** | |
23 2014-03-26 18:42 49 ****************************** | |
24 2014-03-26 18:43 48 ***************************** | |
... ..( 2 skipped). .. ***************************** | |
27 2014-03-26 18:46 48 ***************************** | |
28 2014-03-26 18:47 44 ************************* | |
29 2014-03-26 18:48 39 ******************** | |
30 2014-03-26 18:49 37 ****************** | |
31 2014-03-26 18:50 35 **************** | |
32 2014-03-26 18:51 35 **************** | |
33 2014-03-26 18:52 34 *************** | |
34 2014-03-26 18:53 34 *************** | |
35 2014-03-26 18:54 33 ************** | |
... ..( 6 skipped). .. ************** | |
42 2014-03-26 19:01 33 ************** | |
43 2014-03-26 19:02 ? - | |
44 2014-03-26 19:03 23 **** | |
45 2014-03-26 19:04 24 ***** | |
46 2014-03-26 19:05 24 ***** | |
47 2014-03-26 19:06 25 ****** | |
48 2014-03-26 19:07 26 ******* | |
... ..( 2 skipped). .. ******* | |
51 2014-03-26 19:10 26 ******* | |
52 2014-03-26 19:11 27 ******** | |
53 2014-03-26 19:12 27 ******** | |
54 2014-03-26 19:13 ? - | |
55 2014-03-26 19:14 27 ******** | |
56 2014-03-26 19:15 28 ********* | |
57 2014-03-26 19:16 29 ********** | |
58 2014-03-26 19:17 29 ********** | |
59 2014-03-26 19:18 29 ********** | |
60 2014-03-26 19:19 30 *********** | |
61 2014-03-26 19:20 30 *********** | |
62 2014-03-26 19:21 30 *********** | |
63 2014-03-26 19:22 31 ************ | |
... ..( 3 skipped). .. ************ | |
67 2014-03-26 19:26 31 ************ | |
68 2014-03-26 19:27 32 ************* | |
... ..( 8 skipped). .. ************* | |
77 2014-03-26 19:36 32 ************* | |
78 2014-03-26 19:37 33 ************** | |
... ..( 7 skipped). .. ************** | |
86 2014-03-26 19:45 33 ************** | |
87 2014-03-26 19:46 32 ************* | |
... ..( 12 skipped). .. ************* | |
100 2014-03-26 19:59 32 ************* | |
101 2014-03-26 20:00 ? - | |
102 2014-03-26 20:01 31 ************ | |
103 2014-03-26 20:02 31 ************ | |
104 2014-03-26 20:03 32 ************* | |
105 2014-03-26 20:04 32 ************* | |
106 2014-03-26 20:05 ? - | |
107 2014-03-26 20:06 32 ************* | |
108 2014-03-26 20:07 31 ************ | |
109 2014-03-26 20:08 32 ************* | |
... ..( 3 skipped). .. ************* | |
113 2014-03-26 20:12 32 ************* | |
114 2014-03-26 20:13 ? - | |
115 2014-03-26 20:14 20 * | |
116 2014-03-26 20:15 21 ** | |
117 2014-03-26 20:16 22 *** | |
118 2014-03-26 20:17 22 *** | |
119 2014-03-26 20:18 23 **** | |
... ..( 2 skipped). .. **** | |
122 2014-03-26 20:21 23 **** | |
123 2014-03-26 20:22 24 ***** | |
... ..( 6 skipped). .. ***** | |
2 2014-03-26 20:29 24 ***** | |
3 2014-03-26 20:30 25 ****** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 14 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 19 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 12 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 9 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 14 | |
194 Temperature_Celsius -O---- 240 240 000 - 25 (Min/Max 20/59) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 62) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "14" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "12" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "9" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "19" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "14" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "25" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "240" , | |
"worst": "240" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"device_name": "sdw" , | |
"device_node": "/dev/sdw" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E382426203805J" | |
} , | |
"host_information": { | |
"boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"device_name": "sdw" , | |
"device_node": "/dev/sdw" , | |
"host_ip": "10.0.5.46" , | |
"last_boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"last_host_ip": "10.0.5.46" , | |
"last_known_as": "/dev/sdw" , | |
"last_machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" , | |
"machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" | |
} , | |
"host_ip": "10.0.5.46" , | |
"id": "03277c88-3d77-4cd8-a89b-97c0b6f6d0a1" , | |
"lifetime": 64800 , | |
"machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E382426203805J" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E382426203805J | |
LU WWN Device Id: 5 000cca 6dbc17b2a | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 22:08:38 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 21/24 Celsius | |
Lifetime Min/Max Temperature: 21/54 Celsius | |
Lifetime Average Temperature: 45 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (88) | |
SCT Error Recovery Control: | |
Read: Disabled | |
Write: 255 (25.5 seconds) | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
89 2014-03-26 20:01 47 **************************** | |
90 2014-03-26 20:02 48 ***************************** | |
91 2014-03-26 20:03 48 ***************************** | |
92 2014-03-26 20:04 49 ****************************** | |
93 2014-03-26 20:05 50 ******************************* | |
94 2014-03-26 20:06 49 ****************************** | |
95 2014-03-26 20:07 48 ***************************** | |
96 2014-03-26 20:08 48 ***************************** | |
97 2014-03-26 20:09 47 **************************** | |
98 2014-03-26 20:10 47 **************************** | |
99 2014-03-26 20:11 47 **************************** | |
100 2014-03-26 20:12 48 ***************************** | |
101 2014-03-26 20:13 48 ***************************** | |
102 2014-03-26 20:14 49 ****************************** | |
103 2014-03-26 20:15 51 ******************************** | |
104 2014-03-26 20:16 51 ******************************** | |
105 2014-03-26 20:17 51 ******************************** | |
106 2014-03-26 20:18 50 ******************************* | |
... ..( 2 skipped). .. ******************************* | |
109 2014-03-26 20:21 50 ******************************* | |
110 2014-03-26 20:22 49 ****************************** | |
111 2014-03-26 20:23 48 ***************************** | |
112 2014-03-26 20:24 48 ***************************** | |
113 2014-03-26 20:25 48 ***************************** | |
114 2014-03-26 20:26 47 **************************** | |
115 2014-03-26 20:27 47 **************************** | |
116 2014-03-26 20:28 48 ***************************** | |
... ..( 3 skipped). .. ***************************** | |
120 2014-03-26 20:32 48 ***************************** | |
121 2014-03-26 20:33 49 ****************************** | |
... ..( 17 skipped). .. ****************************** | |
11 2014-03-26 20:51 49 ****************************** | |
12 2014-03-26 20:52 50 ******************************* | |
13 2014-03-26 20:53 51 ******************************** | |
14 2014-03-26 20:54 51 ******************************** | |
15 2014-03-26 20:55 50 ******************************* | |
... ..( 2 skipped). .. ******************************* | |
18 2014-03-26 20:58 50 ******************************* | |
19 2014-03-26 20:59 51 ******************************** | |
20 2014-03-26 21:00 51 ******************************** | |
21 2014-03-26 21:01 51 ******************************** | |
22 2014-03-26 21:02 50 ******************************* | |
... ..( 3 skipped). .. ******************************* | |
26 2014-03-26 21:06 50 ******************************* | |
27 2014-03-26 21:07 43 ************************ | |
28 2014-03-26 21:08 38 ******************* | |
29 2014-03-26 21:09 36 ***************** | |
30 2014-03-26 21:10 34 *************** | |
31 2014-03-26 21:11 33 ************** | |
32 2014-03-26 21:12 33 ************** | |
33 2014-03-26 21:13 33 ************** | |
34 2014-03-26 21:14 32 ************* | |
... ..( 4 skipped). .. ************* | |
39 2014-03-26 21:19 32 ************* | |
40 2014-03-26 21:20 31 ************ | |
41 2014-03-26 21:21 31 ************ | |
42 2014-03-26 21:22 ? - | |
43 2014-03-26 21:23 23 **** | |
44 2014-03-26 21:24 24 ***** | |
45 2014-03-26 21:25 25 ****** | |
46 2014-03-26 21:26 25 ****** | |
47 2014-03-26 21:27 26 ******* | |
... ..( 2 skipped). .. ******* | |
50 2014-03-26 21:30 26 ******* | |
51 2014-03-26 21:31 27 ******** | |
52 2014-03-26 21:32 27 ******** | |
53 2014-03-26 21:33 ? - | |
54 2014-03-26 21:34 27 ******** | |
55 2014-03-26 21:35 27 ******** | |
56 2014-03-26 21:36 28 ********* | |
57 2014-03-26 21:37 29 ********** | |
... ..( 2 skipped). .. ********** | |
60 2014-03-26 21:40 29 ********** | |
61 2014-03-26 21:41 30 *********** | |
... ..( 2 skipped). .. *********** | |
64 2014-03-26 21:44 30 *********** | |
65 2014-03-26 21:45 31 ************ | |
... ..( 4 skipped). .. ************ | |
70 2014-03-26 21:50 31 ************ | |
71 2014-03-26 21:51 ? - | |
72 2014-03-26 21:52 30 *********** | |
73 2014-03-26 21:53 30 *********** | |
74 2014-03-26 21:54 31 ************ | |
75 2014-03-26 21:55 31 ************ | |
76 2014-03-26 21:56 ? - | |
77 2014-03-26 21:57 30 *********** | |
78 2014-03-26 21:58 30 *********** | |
79 2014-03-26 21:59 30 *********** | |
80 2014-03-26 22:00 31 ************ | |
81 2014-03-26 22:01 31 ************ | |
82 2014-03-26 22:02 31 ************ | |
83 2014-03-26 22:03 ? - | |
84 2014-03-26 22:04 22 *** | |
85 2014-03-26 22:05 23 **** | |
86 2014-03-26 22:06 23 **** | |
87 2014-03-26 22:07 24 ***** | |
88 2014-03-26 22:08 24 ***** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 14 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 18 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 12 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 10 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 14 | |
194 Temperature_Celsius -O---- 250 250 000 - 24 (Min/Max 21/54) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 60) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "14" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "12" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "10" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "18" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "14" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "24" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "250" , | |
"worst": "250" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "09abaf1f-8fc1-4f46-943d-425e8fbd092d" , | |
"device_name": "sdae" , | |
"device_node": "/dev/sdae" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824562C4JMVK" | |
} , | |
"host_information": { | |
"boot_id": "09abaf1f-8fc1-4f46-943d-425e8fbd092d" , | |
"device_name": "sdae" , | |
"device_node": "/dev/sdae" , | |
"host_ip": "10.0.5.50" , | |
"last_boot_id": "09abaf1f-8fc1-4f46-943d-425e8fbd092d" , | |
"last_host_ip": "10.0.5.50" , | |
"last_known_as": "/dev/sdae" , | |
"last_machine_id": "300a76492cf73e527d61b3e849efde1b" , | |
"machine_id": "300a76492cf73e527d61b3e849efde1b" | |
} , | |
"host_ip": "10.0.5.50" , | |
"id": "0431ee6e-45fc-479e-be83-50853f8784e2" , | |
"lifetime": 68400 , | |
"machine_id": "300a76492cf73e527d61b3e849efde1b" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824562C4JMVK" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824562C4JMVK | |
LU WWN Device Id: 5 000cca 6d3c20ff3 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 16:46:33 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 128 (minimum power consumption without standby) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 23 Celsius | |
Power Cycle Min/Max Temperature: 19/23 Celsius | |
Lifetime Min/Max Temperature: 19/46 Celsius | |
Lifetime Average Temperature: 38 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (3) | |
SCT Error Recovery Control: | |
Read: 255 (25.5 seconds) | |
Write: 255 (25.5 seconds) | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
4 2014-03-26 14:39 42 *********************** | |
5 2014-03-26 14:40 43 ************************ | |
6 2014-03-26 14:41 43 ************************ | |
7 2014-03-26 14:42 42 *********************** | |
8 2014-03-26 14:43 42 *********************** | |
9 2014-03-26 14:44 41 ********************** | |
10 2014-03-26 14:45 40 ********************* | |
11 2014-03-26 14:46 39 ******************** | |
12 2014-03-26 14:47 40 ********************* | |
13 2014-03-26 14:48 40 ********************* | |
14 2014-03-26 14:49 41 ********************** | |
15 2014-03-26 14:50 42 *********************** | |
16 2014-03-26 14:51 42 *********************** | |
17 2014-03-26 14:52 42 *********************** | |
18 2014-03-26 14:53 41 ********************** | |
19 2014-03-26 14:54 41 ********************** | |
20 2014-03-26 14:55 40 ********************* | |
21 2014-03-26 14:56 40 ********************* | |
22 2014-03-26 14:57 40 ********************* | |
23 2014-03-26 14:58 41 ********************** | |
24 2014-03-26 14:59 42 *********************** | |
25 2014-03-26 15:00 43 ************************ | |
26 2014-03-26 15:01 43 ************************ | |
27 2014-03-26 15:02 43 ************************ | |
28 2014-03-26 15:03 42 *********************** | |
29 2014-03-26 15:04 43 ************************ | |
... ..( 2 skipped). .. ************************ | |
32 2014-03-26 15:07 43 ************************ | |
33 2014-03-26 15:08 42 *********************** | |
... ..( 3 skipped). .. *********************** | |
37 2014-03-26 15:12 42 *********************** | |
38 2014-03-26 15:13 41 ********************** | |
... ..( 3 skipped). .. ********************** | |
42 2014-03-26 15:17 41 ********************** | |
43 2014-03-26 15:18 42 *********************** | |
44 2014-03-26 15:19 42 *********************** | |
45 2014-03-26 15:20 42 *********************** | |
46 2014-03-26 15:21 41 ********************** | |
... ..( 11 skipped). .. ********************** | |
58 2014-03-26 15:33 41 ********************** | |
59 2014-03-26 15:34 40 ********************* | |
60 2014-03-26 15:35 40 ********************* | |
61 2014-03-26 15:36 41 ********************** | |
62 2014-03-26 15:37 41 ********************** | |
63 2014-03-26 15:38 41 ********************** | |
64 2014-03-26 15:39 42 *********************** | |
65 2014-03-26 15:40 41 ********************** | |
66 2014-03-26 15:41 41 ********************** | |
67 2014-03-26 15:42 42 *********************** | |
68 2014-03-26 15:43 42 *********************** | |
69 2014-03-26 15:44 42 *********************** | |
70 2014-03-26 15:45 41 ********************** | |
71 2014-03-26 15:46 41 ********************** | |
72 2014-03-26 15:47 42 *********************** | |
73 2014-03-26 15:48 41 ********************** | |
74 2014-03-26 15:49 42 *********************** | |
75 2014-03-26 15:50 41 ********************** | |
76 2014-03-26 15:51 42 *********************** | |
77 2014-03-26 15:52 42 *********************** | |
78 2014-03-26 15:53 41 ********************** | |
79 2014-03-26 15:54 42 *********************** | |
80 2014-03-26 15:55 42 *********************** | |
81 2014-03-26 15:56 41 ********************** | |
82 2014-03-26 15:57 42 *********************** | |
83 2014-03-26 15:58 39 ******************** | |
84 2014-03-26 15:59 35 **************** | |
85 2014-03-26 16:00 33 ************** | |
86 2014-03-26 16:01 31 ************ | |
87 2014-03-26 16:02 30 *********** | |
... ..( 5 skipped). .. *********** | |
93 2014-03-26 16:08 30 *********** | |
94 2014-03-26 16:09 31 ************ | |
95 2014-03-26 16:10 31 ************ | |
96 2014-03-26 16:11 30 *********** | |
97 2014-03-26 16:12 30 *********** | |
98 2014-03-26 16:13 ? - | |
99 2014-03-26 16:14 24 ***** | |
100 2014-03-26 16:15 25 ****** | |
101 2014-03-26 16:16 26 ******* | |
102 2014-03-26 16:17 26 ******* | |
103 2014-03-26 16:18 ? - | |
104 2014-03-26 16:19 28 ********* | |
105 2014-03-26 16:20 28 ********* | |
106 2014-03-26 16:21 28 ********* | |
107 2014-03-26 16:22 29 ********** | |
108 2014-03-26 16:23 29 ********** | |
109 2014-03-26 16:24 30 *********** | |
110 2014-03-26 16:25 30 *********** | |
111 2014-03-26 16:26 30 *********** | |
112 2014-03-26 16:27 31 ************ | |
113 2014-03-26 16:28 30 *********** | |
114 2014-03-26 16:29 31 ************ | |
... ..( 3 skipped). .. ************ | |
118 2014-03-26 16:33 31 ************ | |
119 2014-03-26 16:34 ? - | |
120 2014-03-26 16:35 30 *********** | |
121 2014-03-26 16:36 30 *********** | |
122 2014-03-26 16:37 31 ************ | |
123 2014-03-26 16:38 ? - | |
124 2014-03-26 16:39 30 *********** | |
125 2014-03-26 16:40 30 *********** | |
126 2014-03-26 16:41 31 ************ | |
127 2014-03-26 16:42 ? - | |
0 2014-03-26 16:43 20 * | |
1 2014-03-26 16:44 21 ** | |
2 2014-03-26 16:45 22 *** | |
3 2014-03-26 16:46 23 **** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 21 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 19 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 19 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 13 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 21 | |
194 Temperature_Celsius -O---- 253 253 000 - 23 (Min/Max 19/46) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 64) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "21" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "19" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "13" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "19" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "21" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "23" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "5c5c7dd6-1b3d-4e98-a597-447d22e4ff23" , | |
"device_name": "sdi" , | |
"device_node": "/dev/sdi" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824262C9BSSD" | |
} , | |
"host_information": { | |
"boot_id": "5c5c7dd6-1b3d-4e98-a597-447d22e4ff23" , | |
"device_name": "sdi" , | |
"device_node": "/dev/sdi" , | |
"host_ip": "10.0.5.51" , | |
"last_boot_id": "5c5c7dd6-1b3d-4e98-a597-447d22e4ff23" , | |
"last_host_ip": "10.0.5.51" , | |
"last_known_as": "/dev/sdi" , | |
"last_machine_id": "3844bf17de8c06f75ff5fcc94bd62999" , | |
"machine_id": "3844bf17de8c06f75ff5fcc94bd62999" | |
} , | |
"host_ip": "10.0.5.51" , | |
"id": "08059956-8fb1-45fd-be59-a7a4fdad0bdc" , | |
"lifetime": 64800 , | |
"machine_id": "3844bf17de8c06f75ff5fcc94bd62999" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824262C9BSSD" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824262C9BSSD | |
LU WWN Device Id: 5 000cca 6d3c44382 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 23:09:10 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 22/24 Celsius | |
Lifetime Min/Max Temperature: 22/58 Celsius | |
Lifetime Average Temperature: 48 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (100) | |
Error SMART WRITE LOG does not return COUNT and LBA_LOW register | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
101 2014-03-26 21:02 50 ******************************* | |
102 2014-03-26 21:03 50 ******************************* | |
103 2014-03-26 21:04 51 ******************************** | |
104 2014-03-26 21:05 52 ********************************* | |
105 2014-03-26 21:06 52 ********************************* | |
106 2014-03-26 21:07 53 ********************************** | |
107 2014-03-26 21:08 54 *********************************** | |
108 2014-03-26 21:09 56 ************************************* | |
109 2014-03-26 21:10 56 ************************************* | |
110 2014-03-26 21:11 55 ************************************ | |
111 2014-03-26 21:12 54 *********************************** | |
112 2014-03-26 21:13 54 *********************************** | |
113 2014-03-26 21:14 54 *********************************** | |
114 2014-03-26 21:15 53 ********************************** | |
115 2014-03-26 21:16 54 *********************************** | |
116 2014-03-26 21:17 53 ********************************** | |
... ..( 5 skipped). .. ********************************** | |
122 2014-03-26 21:23 53 ********************************** | |
123 2014-03-26 21:24 52 ********************************* | |
... ..( 30 skipped). .. ********************************* | |
26 2014-03-26 21:55 52 ********************************* | |
27 2014-03-26 21:56 51 ******************************** | |
28 2014-03-26 21:57 51 ******************************** | |
29 2014-03-26 21:58 45 ************************** | |
30 2014-03-26 21:59 40 ********************* | |
31 2014-03-26 22:00 37 ****************** | |
32 2014-03-26 22:01 35 **************** | |
33 2014-03-26 22:02 34 *************** | |
... ..( 2 skipped). .. *************** | |
36 2014-03-26 22:05 34 *************** | |
37 2014-03-26 22:06 33 ************** | |
... ..( 5 skipped). .. ************** | |
43 2014-03-26 22:12 33 ************** | |
44 2014-03-26 22:13 ? - | |
45 2014-03-26 22:14 23 **** | |
46 2014-03-26 22:15 24 ***** | |
47 2014-03-26 22:16 25 ****** | |
48 2014-03-26 22:17 25 ****** | |
49 2014-03-26 22:18 26 ******* | |
50 2014-03-26 22:19 26 ******* | |
51 2014-03-26 22:20 26 ******* | |
52 2014-03-26 22:21 27 ******** | |
53 2014-03-26 22:22 27 ******** | |
54 2014-03-26 22:23 27 ******** | |
55 2014-03-26 22:24 ? - | |
56 2014-03-26 22:25 27 ******** | |
57 2014-03-26 22:26 27 ******** | |
58 2014-03-26 22:27 28 ********* | |
59 2014-03-26 22:28 29 ********** | |
... ..( 2 skipped). .. ********** | |
62 2014-03-26 22:31 29 ********** | |
63 2014-03-26 22:32 30 *********** | |
... ..( 3 skipped). .. *********** | |
67 2014-03-26 22:36 30 *********** | |
68 2014-03-26 22:37 31 ************ | |
... ..( 10 skipped). .. ************ | |
79 2014-03-26 22:48 31 ************ | |
80 2014-03-26 22:49 ? - | |
81 2014-03-26 22:50 31 ************ | |
... ..( 2 skipped). .. ************ | |
84 2014-03-26 22:53 31 ************ | |
85 2014-03-26 22:54 ? - | |
86 2014-03-26 22:55 30 *********** | |
... ..( 3 skipped). .. *********** | |
90 2014-03-26 22:59 30 *********** | |
91 2014-03-26 23:00 31 ************ | |
92 2014-03-26 23:01 ? - | |
93 2014-03-26 23:02 22 *** | |
94 2014-03-26 23:03 23 **** | |
95 2014-03-26 23:04 23 **** | |
96 2014-03-26 23:05 24 ***** | |
... ..( 3 skipped). .. ***** | |
100 2014-03-26 23:09 24 ***** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 15 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 18 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 13 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 11 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 995 | |
194 Temperature_Celsius -O---- 250 250 000 - 24 (Min/Max 22/58) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 57) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "995" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "13" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "11" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "18" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "15" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "24" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "250" , | |
"worst": "250" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"device_name": "sdh" , | |
"device_node": "/dev/sdh" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824262037YTJ" | |
} , | |
"host_information": { | |
"boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"device_name": "sdh" , | |
"device_node": "/dev/sdh" , | |
"host_ip": "10.0.5.50" , | |
"last_boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"last_host_ip": "10.0.5.50" , | |
"last_known_as": "/dev/sdh" , | |
"last_machine_id": "300a76492cf73e527d61b3e849efde1b" , | |
"machine_id": "300a76492cf73e527d61b3e849efde1b" | |
} , | |
"host_ip": "10.0.5.50" , | |
"id": "0831f7ff-a77b-43dc-bb08-3e9cd17696a8" , | |
"lifetime": 64800 , | |
"machine_id": "300a76492cf73e527d61b3e849efde1b" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824262037YTJ" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824262037YTJ | |
LU WWN Device Id: 5 000cca 6dbc17aff | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 22:46:19 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 25 Celsius | |
Power Cycle Min/Max Temperature: 22/25 Celsius | |
Lifetime Min/Max Temperature: 22/53 Celsius | |
Lifetime Average Temperature: 44 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (109) | |
SCT Error Recovery Control: | |
Read: Disabled | |
Write: Disabled | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
110 2014-03-26 20:39 49 ****************************** | |
111 2014-03-26 20:40 48 ***************************** | |
... ..( 5 skipped). .. ***************************** | |
117 2014-03-26 20:46 48 ***************************** | |
118 2014-03-26 20:47 47 **************************** | |
119 2014-03-26 20:48 47 **************************** | |
120 2014-03-26 20:49 48 ***************************** | |
121 2014-03-26 20:50 48 ***************************** | |
122 2014-03-26 20:51 47 **************************** | |
... ..( 8 skipped). .. **************************** | |
3 2014-03-26 21:00 47 **************************** | |
4 2014-03-26 21:01 46 *************************** | |
... ..( 3 skipped). .. *************************** | |
8 2014-03-26 21:05 46 *************************** | |
9 2014-03-26 21:06 47 **************************** | |
10 2014-03-26 21:07 47 **************************** | |
11 2014-03-26 21:08 46 *************************** | |
... ..( 3 skipped). .. *************************** | |
15 2014-03-26 21:12 46 *************************** | |
16 2014-03-26 21:13 45 ************************** | |
17 2014-03-26 21:14 46 *************************** | |
... ..( 3 skipped). .. *************************** | |
21 2014-03-26 21:18 46 *************************** | |
22 2014-03-26 21:19 47 **************************** | |
... ..( 2 skipped). .. **************************** | |
25 2014-03-26 21:22 47 **************************** | |
26 2014-03-26 21:23 48 ***************************** | |
27 2014-03-26 21:24 48 ***************************** | |
28 2014-03-26 21:25 47 **************************** | |
29 2014-03-26 21:26 41 ********************** | |
30 2014-03-26 21:27 37 ****************** | |
31 2014-03-26 21:28 35 **************** | |
32 2014-03-26 21:29 34 *************** | |
33 2014-03-26 21:30 33 ************** | |
... ..( 9 skipped). .. ************** | |
43 2014-03-26 21:40 33 ************** | |
44 2014-03-26 21:41 ? - | |
45 2014-03-26 21:42 23 **** | |
46 2014-03-26 21:43 24 ***** | |
47 2014-03-26 21:44 25 ****** | |
48 2014-03-26 21:45 25 ****** | |
49 2014-03-26 21:46 26 ******* | |
50 2014-03-26 21:47 26 ******* | |
51 2014-03-26 21:48 27 ******** | |
52 2014-03-26 21:49 26 ******* | |
53 2014-03-26 21:50 27 ******** | |
54 2014-03-26 21:51 27 ******** | |
55 2014-03-26 21:52 27 ******** | |
56 2014-03-26 21:53 ? - | |
57 2014-03-26 21:54 27 ******** | |
58 2014-03-26 21:55 27 ******** | |
59 2014-03-26 21:56 28 ********* | |
60 2014-03-26 21:57 29 ********** | |
... ..( 3 skipped). .. ********** | |
64 2014-03-26 22:01 29 ********** | |
65 2014-03-26 22:02 30 *********** | |
... ..( 3 skipped). .. *********** | |
69 2014-03-26 22:06 30 *********** | |
70 2014-03-26 22:07 31 ************ | |
... ..( 19 skipped). .. ************ | |
90 2014-03-26 22:27 31 ************ | |
91 2014-03-26 22:28 ? - | |
92 2014-03-26 22:29 30 *********** | |
... ..( 2 skipped). .. *********** | |
95 2014-03-26 22:32 30 *********** | |
96 2014-03-26 22:33 ? - | |
97 2014-03-26 22:34 30 *********** | |
... ..( 4 skipped). .. *********** | |
102 2014-03-26 22:39 30 *********** | |
103 2014-03-26 22:40 ? - | |
104 2014-03-26 22:41 22 *** | |
105 2014-03-26 22:42 23 **** | |
106 2014-03-26 22:43 24 ***** | |
107 2014-03-26 22:44 24 ***** | |
108 2014-03-26 22:45 24 ***** | |
109 2014-03-26 22:46 25 ****** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 15 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 18 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 13 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 10 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 15 | |
194 Temperature_Celsius -O---- 240 240 000 - 25 (Min/Max 22/53) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 66) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "15" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "13" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "10" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "18" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "15" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "25" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "240" , | |
"worst": "240" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "5c5c7dd6-1b3d-4e98-a597-447d22e4ff23" , | |
"device_name": "sdw" , | |
"device_node": "/dev/sdw" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824262C5Y61D" | |
} , | |
"host_information": { | |
"boot_id": "5c5c7dd6-1b3d-4e98-a597-447d22e4ff23" , | |
"device_name": "sdw" , | |
"device_node": "/dev/sdw" , | |
"host_ip": "10.0.5.51" , | |
"last_boot_id": "5c5c7dd6-1b3d-4e98-a597-447d22e4ff23" , | |
"last_host_ip": "10.0.5.51" , | |
"last_known_as": "/dev/sdw" , | |
"last_machine_id": "3844bf17de8c06f75ff5fcc94bd62999" , | |
"machine_id": "3844bf17de8c06f75ff5fcc94bd62999" | |
} , | |
"host_ip": "10.0.5.51" , | |
"id": "0d150703-4727-4b50-9630-14d4c67a046b" , | |
"lifetime": 392400 , | |
"machine_id": "3844bf17de8c06f75ff5fcc94bd62999" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824262C5Y61D" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824262C5Y61D | |
LU WWN Device Id: 5 000cca 6d3c2b373 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 23:08:56 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 22/24 Celsius | |
Lifetime Min/Max Temperature: 18/58 Celsius | |
Lifetime Average Temperature: 44 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (48) | |
Error SMART WRITE LOG does not return COUNT and LBA_LOW register | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
49 2014-03-26 21:01 49 ****************************** | |
50 2014-03-26 21:02 50 ******************************* | |
51 2014-03-26 21:03 51 ******************************** | |
52 2014-03-26 21:04 51 ******************************** | |
53 2014-03-26 21:05 50 ******************************* | |
54 2014-03-26 21:06 49 ****************************** | |
55 2014-03-26 21:07 49 ****************************** | |
56 2014-03-26 21:08 48 ***************************** | |
57 2014-03-26 21:09 48 ***************************** | |
58 2014-03-26 21:10 48 ***************************** | |
59 2014-03-26 21:11 49 ****************************** | |
60 2014-03-26 21:12 50 ******************************* | |
61 2014-03-26 21:13 51 ******************************** | |
62 2014-03-26 21:14 50 ******************************* | |
63 2014-03-26 21:15 50 ******************************* | |
64 2014-03-26 21:16 49 ****************************** | |
65 2014-03-26 21:17 48 ***************************** | |
66 2014-03-26 21:18 49 ****************************** | |
67 2014-03-26 21:19 49 ****************************** | |
68 2014-03-26 21:20 49 ****************************** | |
69 2014-03-26 21:21 50 ******************************* | |
70 2014-03-26 21:22 50 ******************************* | |
71 2014-03-26 21:23 51 ******************************** | |
72 2014-03-26 21:24 51 ******************************** | |
73 2014-03-26 21:25 50 ******************************* | |
74 2014-03-26 21:26 49 ****************************** | |
75 2014-03-26 21:27 48 ***************************** | |
76 2014-03-26 21:28 48 ***************************** | |
77 2014-03-26 21:29 48 ***************************** | |
78 2014-03-26 21:30 49 ****************************** | |
79 2014-03-26 21:31 49 ****************************** | |
80 2014-03-26 21:32 50 ******************************* | |
81 2014-03-26 21:33 50 ******************************* | |
82 2014-03-26 21:34 51 ******************************** | |
83 2014-03-26 21:35 50 ******************************* | |
84 2014-03-26 21:36 49 ****************************** | |
85 2014-03-26 21:37 49 ****************************** | |
86 2014-03-26 21:38 48 ***************************** | |
87 2014-03-26 21:39 48 ***************************** | |
88 2014-03-26 21:40 49 ****************************** | |
89 2014-03-26 21:41 49 ****************************** | |
90 2014-03-26 21:42 50 ******************************* | |
91 2014-03-26 21:43 51 ******************************** | |
92 2014-03-26 21:44 51 ******************************** | |
93 2014-03-26 21:45 51 ******************************** | |
94 2014-03-26 21:46 50 ******************************* | |
95 2014-03-26 21:47 49 ****************************** | |
... ..( 3 skipped). .. ****************************** | |
99 2014-03-26 21:51 49 ****************************** | |
100 2014-03-26 21:52 50 ******************************* | |
101 2014-03-26 21:53 50 ******************************* | |
102 2014-03-26 21:54 51 ******************************** | |
103 2014-03-26 21:55 51 ******************************** | |
104 2014-03-26 21:56 50 ******************************* | |
105 2014-03-26 21:57 49 ****************************** | |
106 2014-03-26 21:58 48 ***************************** | |
107 2014-03-26 21:59 48 ***************************** | |
108 2014-03-26 22:00 49 ****************************** | |
109 2014-03-26 22:01 49 ****************************** | |
110 2014-03-26 22:02 50 ******************************* | |
111 2014-03-26 22:03 50 ******************************* | |
112 2014-03-26 22:04 49 ****************************** | |
113 2014-03-26 22:05 45 ************************** | |
114 2014-03-26 22:06 40 ********************* | |
115 2014-03-26 22:07 37 ****************** | |
116 2014-03-26 22:08 36 ***************** | |
117 2014-03-26 22:09 36 ***************** | |
118 2014-03-26 22:10 36 ***************** | |
119 2014-03-26 22:11 35 **************** | |
120 2014-03-26 22:12 35 **************** | |
121 2014-03-26 22:13 34 *************** | |
122 2014-03-26 22:14 34 *************** | |
123 2014-03-26 22:15 34 *************** | |
124 2014-03-26 22:16 33 ************** | |
... ..( 3 skipped). .. ************** | |
0 2014-03-26 22:20 33 ************** | |
1 2014-03-26 22:21 ? - | |
2 2014-03-26 22:22 30 *********** | |
3 2014-03-26 22:23 30 *********** | |
4 2014-03-26 22:24 30 *********** | |
5 2014-03-26 22:25 29 ********** | |
... ..( 5 skipped). .. ********** | |
11 2014-03-26 22:31 29 ********** | |
12 2014-03-26 22:32 ? - | |
13 2014-03-26 22:33 24 ***** | |
14 2014-03-26 22:34 25 ****** | |
15 2014-03-26 22:35 26 ******* | |
16 2014-03-26 22:36 27 ******** | |
17 2014-03-26 22:37 ? - | |
18 2014-03-26 22:38 29 ********** | |
19 2014-03-26 22:39 29 ********** | |
20 2014-03-26 22:40 29 ********** | |
21 2014-03-26 22:41 30 *********** | |
22 2014-03-26 22:42 30 *********** | |
23 2014-03-26 22:43 31 ************ | |
... ..( 2 skipped). .. ************ | |
26 2014-03-26 22:46 31 ************ | |
27 2014-03-26 22:47 32 ************* | |
28 2014-03-26 22:48 32 ************* | |
29 2014-03-26 22:49 32 ************* | |
30 2014-03-26 22:50 ? - | |
31 2014-03-26 22:51 32 ************* | |
32 2014-03-26 22:52 32 ************* | |
33 2014-03-26 22:53 32 ************* | |
34 2014-03-26 22:54 ? - | |
35 2014-03-26 22:55 32 ************* | |
... ..( 3 skipped). .. ************* | |
39 2014-03-26 22:59 32 ************* | |
40 2014-03-26 23:00 ? - | |
41 2014-03-26 23:01 22 *** | |
42 2014-03-26 23:02 23 **** | |
43 2014-03-26 23:03 23 **** | |
44 2014-03-26 23:04 23 **** | |
45 2014-03-26 23:05 24 ***** | |
... ..( 2 skipped). .. ***** | |
48 2014-03-26 23:08 24 ***** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 77 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 109 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 51 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 42 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 78 | |
194 Temperature_Celsius -O---- 250 250 000 - 24 (Min/Max 18/58) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 74) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "78" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "51" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "42" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "109" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "77" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "24" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "250" , | |
"worst": "250" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"device_name": "sdb" , | |
"device_node": "/dev/sdb" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824262C9D1VD" | |
} , | |
"host_information": { | |
"boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"device_name": "sdb" , | |
"device_node": "/dev/sdb" , | |
"host_ip": "10.0.5.50" , | |
"last_boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"last_host_ip": "10.0.5.50" , | |
"last_known_as": "/dev/sdb" , | |
"last_machine_id": "300a76492cf73e527d61b3e849efde1b" , | |
"machine_id": "300a76492cf73e527d61b3e849efde1b" | |
} , | |
"host_ip": "10.0.5.50" , | |
"id": "0ee4f5cf-c3ea-4024-bf4d-378067e06352" , | |
"lifetime": 64800 , | |
"machine_id": "300a76492cf73e527d61b3e849efde1b" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824262C9D1VD" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824262C9D1VD | |
LU WWN Device Id: 5 000cca 6d3c4449c | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 22:46:38 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 26 Celsius | |
Power Cycle Min/Max Temperature: 23/26 Celsius | |
Lifetime Min/Max Temperature: 23/63 Celsius | |
Lifetime Average Temperature: 50 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (113) | |
SCT Error Recovery Control: | |
Read: Disabled | |
Write: Disabled | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
114 2014-03-26 20:39 53 ********************************** | |
115 2014-03-26 20:40 53 ********************************** | |
116 2014-03-26 20:41 53 ********************************** | |
117 2014-03-26 20:42 54 *********************************** | |
118 2014-03-26 20:43 55 ************************************ | |
119 2014-03-26 20:44 56 ************************************* | |
120 2014-03-26 20:45 57 ************************************** | |
121 2014-03-26 20:46 58 *************************************** | |
122 2014-03-26 20:47 57 ************************************** | |
123 2014-03-26 20:48 56 ************************************* | |
124 2014-03-26 20:49 56 ************************************* | |
125 2014-03-26 20:50 56 ************************************* | |
126 2014-03-26 20:51 55 ************************************ | |
127 2014-03-26 20:52 54 *********************************** | |
... ..( 4 skipped). .. *********************************** | |
4 2014-03-26 20:57 54 *********************************** | |
5 2014-03-26 20:58 53 ********************************** | |
... ..( 3 skipped). .. ********************************** | |
9 2014-03-26 21:02 53 ********************************** | |
10 2014-03-26 21:03 52 ********************************* | |
... ..( 2 skipped). .. ********************************* | |
13 2014-03-26 21:06 52 ********************************* | |
14 2014-03-26 21:07 53 ********************************** | |
15 2014-03-26 21:08 53 ********************************** | |
16 2014-03-26 21:09 54 *********************************** | |
... ..( 3 skipped). .. *********************************** | |
20 2014-03-26 21:13 54 *********************************** | |
21 2014-03-26 21:14 55 ************************************ | |
22 2014-03-26 21:15 54 *********************************** | |
23 2014-03-26 21:16 55 ************************************ | |
... ..( 10 skipped). .. ************************************ | |
34 2014-03-26 21:27 55 ************************************ | |
35 2014-03-26 21:28 54 *********************************** | |
... ..( 4 skipped). .. *********************************** | |
40 2014-03-26 21:33 54 *********************************** | |
41 2014-03-26 21:34 48 ***************************** | |
42 2014-03-26 21:35 42 *********************** | |
43 2014-03-26 21:36 39 ******************** | |
44 2014-03-26 21:37 37 ****************** | |
45 2014-03-26 21:38 35 **************** | |
46 2014-03-26 21:39 34 *************** | |
47 2014-03-26 21:40 34 *************** | |
48 2014-03-26 21:41 33 ************** | |
... ..( 2 skipped). .. ************** | |
51 2014-03-26 21:44 33 ************** | |
52 2014-03-26 21:45 32 ************* | |
... ..( 2 skipped). .. ************* | |
55 2014-03-26 21:48 32 ************* | |
56 2014-03-26 21:49 ? - | |
57 2014-03-26 21:50 27 ******** | |
... ..( 2 skipped). .. ******** | |
60 2014-03-26 21:53 27 ******** | |
61 2014-03-26 21:54 28 ********* | |
62 2014-03-26 21:55 27 ******** | |
... ..( 2 skipped). .. ******** | |
65 2014-03-26 21:58 27 ******** | |
66 2014-03-26 21:59 ? - | |
67 2014-03-26 22:00 27 ******** | |
68 2014-03-26 22:01 27 ******** | |
69 2014-03-26 22:02 28 ********* | |
70 2014-03-26 22:03 29 ********** | |
... ..( 3 skipped). .. ********** | |
74 2014-03-26 22:07 29 ********** | |
75 2014-03-26 22:08 30 *********** | |
... ..( 3 skipped). .. *********** | |
79 2014-03-26 22:12 30 *********** | |
80 2014-03-26 22:13 31 ************ | |
81 2014-03-26 22:14 30 *********** | |
82 2014-03-26 22:15 30 *********** | |
83 2014-03-26 22:16 31 ************ | |
84 2014-03-26 22:17 30 *********** | |
85 2014-03-26 22:18 31 ************ | |
86 2014-03-26 22:19 31 ************ | |
87 2014-03-26 22:20 31 ************ | |
88 2014-03-26 22:21 ? - | |
89 2014-03-26 22:22 30 *********** | |
... ..( 5 skipped). .. *********** | |
95 2014-03-26 22:28 30 *********** | |
96 2014-03-26 22:29 31 ************ | |
... ..( 2 skipped). .. ************ | |
99 2014-03-26 22:32 31 ************ | |
100 2014-03-26 22:33 ? - | |
101 2014-03-26 22:34 30 *********** | |
... ..( 3 skipped). .. *********** | |
105 2014-03-26 22:38 30 *********** | |
106 2014-03-26 22:39 31 ************ | |
107 2014-03-26 22:40 ? - | |
108 2014-03-26 22:41 23 **** | |
109 2014-03-26 22:42 24 ***** | |
110 2014-03-26 22:43 24 ***** | |
111 2014-03-26 22:44 25 ****** | |
112 2014-03-26 22:45 25 ****** | |
113 2014-03-26 22:46 26 ******* | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 20 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 18 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 18 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 15 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 20 | |
194 Temperature_Celsius -O---- 230 230 000 - 26 (Min/Max 23/63) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 66) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "20" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "18" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "15" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "18" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "20" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "26" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "230" , | |
"worst": "230" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"device_name": "sdn" , | |
"device_node": "/dev/sdn" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E18G4263CM6MSD" | |
} , | |
"host_information": { | |
"boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"device_name": "sdn" , | |
"device_node": "/dev/sdn" , | |
"host_ip": "10.0.5.45" , | |
"last_boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"last_host_ip": "10.0.5.45" , | |
"last_known_as": "/dev/sdn" , | |
"last_machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" | |
} , | |
"host_ip": "10.0.5.45" , | |
"id": "1052a5c1-3de1-46ae-8c90-3ffc07d7d3e3" , | |
"lifetime": 151200 , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E18G4263CM6MSD" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E18G4263CM6MSD | |
LU WWN Device Id: 5 000cca 6d4c8bbf7 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 21:06:34 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 27 Celsius | |
Power Cycle Min/Max Temperature: 20/27 Celsius | |
Lifetime Min/Max Temperature: 19/47 Celsius | |
Lifetime Average Temperature: 33 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (109) | |
Error Write SCT (Get) Error Recovery Control Command failed: scsi error unsupported scsi opcode | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
110 2014-03-26 18:59 41 ********************** | |
111 2014-03-26 19:00 40 ********************* | |
112 2014-03-26 19:01 40 ********************* | |
113 2014-03-26 19:02 39 ******************** | |
114 2014-03-26 19:03 38 ******************* | |
115 2014-03-26 19:04 38 ******************* | |
116 2014-03-26 19:05 37 ****************** | |
117 2014-03-26 19:06 37 ****************** | |
118 2014-03-26 19:07 38 ******************* | |
119 2014-03-26 19:08 39 ******************** | |
120 2014-03-26 19:09 39 ******************** | |
121 2014-03-26 19:10 41 ********************** | |
122 2014-03-26 19:11 40 ********************* | |
123 2014-03-26 19:12 40 ********************* | |
124 2014-03-26 19:13 39 ******************** | |
125 2014-03-26 19:14 39 ******************** | |
126 2014-03-26 19:15 38 ******************* | |
127 2014-03-26 19:16 37 ****************** | |
0 2014-03-26 19:17 37 ****************** | |
1 2014-03-26 19:18 38 ******************* | |
2 2014-03-26 19:19 38 ******************* | |
3 2014-03-26 19:20 39 ******************** | |
... ..( 4 skipped). .. ******************** | |
8 2014-03-26 19:25 39 ******************** | |
9 2014-03-26 19:26 40 ********************* | |
10 2014-03-26 19:27 40 ********************* | |
11 2014-03-26 19:28 40 ********************* | |
12 2014-03-26 19:29 39 ******************** | |
13 2014-03-26 19:30 40 ********************* | |
14 2014-03-26 19:31 39 ******************** | |
15 2014-03-26 19:32 40 ********************* | |
16 2014-03-26 19:33 40 ********************* | |
17 2014-03-26 19:34 40 ********************* | |
18 2014-03-26 19:35 41 ********************** | |
19 2014-03-26 19:36 40 ********************* | |
20 2014-03-26 19:37 41 ********************** | |
21 2014-03-26 19:38 40 ********************* | |
22 2014-03-26 19:39 40 ********************* | |
23 2014-03-26 19:40 39 ******************** | |
24 2014-03-26 19:41 40 ********************* | |
25 2014-03-26 19:42 40 ********************* | |
26 2014-03-26 19:43 39 ******************** | |
27 2014-03-26 19:44 40 ********************* | |
28 2014-03-26 19:45 39 ******************** | |
29 2014-03-26 19:46 40 ********************* | |
... ..( 5 skipped). .. ********************* | |
35 2014-03-26 19:52 40 ********************* | |
36 2014-03-26 19:53 39 ******************** | |
37 2014-03-26 19:54 38 ******************* | |
38 2014-03-26 19:55 39 ******************** | |
39 2014-03-26 19:56 38 ******************* | |
40 2014-03-26 19:57 39 ******************** | |
... ..( 5 skipped). .. ******************** | |
46 2014-03-26 20:03 39 ******************** | |
47 2014-03-26 20:04 38 ******************* | |
48 2014-03-26 20:05 39 ******************** | |
49 2014-03-26 20:06 38 ******************* | |
50 2014-03-26 20:07 39 ******************** | |
51 2014-03-26 20:08 38 ******************* | |
52 2014-03-26 20:09 38 ******************* | |
53 2014-03-26 20:10 39 ******************** | |
54 2014-03-26 20:11 39 ******************** | |
55 2014-03-26 20:12 38 ******************* | |
... ..( 3 skipped). .. ******************* | |
59 2014-03-26 20:16 38 ******************* | |
60 2014-03-26 20:17 37 ****************** | |
61 2014-03-26 20:18 33 ************** | |
62 2014-03-26 20:19 31 ************ | |
63 2014-03-26 20:20 29 ********** | |
64 2014-03-26 20:21 29 ********** | |
65 2014-03-26 20:22 29 ********** | |
66 2014-03-26 20:23 ? - | |
67 2014-03-26 20:24 21 ** | |
68 2014-03-26 20:25 23 **** | |
69 2014-03-26 20:26 24 ***** | |
70 2014-03-26 20:27 25 ****** | |
71 2014-03-26 20:28 ? - | |
72 2014-03-26 20:29 27 ******** | |
73 2014-03-26 20:30 26 ******* | |
74 2014-03-26 20:31 27 ******** | |
75 2014-03-26 20:32 28 ********* | |
76 2014-03-26 20:33 28 ********* | |
77 2014-03-26 20:34 29 ********** | |
78 2014-03-26 20:35 29 ********** | |
79 2014-03-26 20:36 29 ********** | |
80 2014-03-26 20:37 30 *********** | |
81 2014-03-26 20:38 30 *********** | |
82 2014-03-26 20:39 29 ********** | |
83 2014-03-26 20:40 ? - | |
84 2014-03-26 20:41 30 *********** | |
85 2014-03-26 20:42 30 *********** | |
86 2014-03-26 20:43 30 *********** | |
87 2014-03-26 20:44 ? - | |
88 2014-03-26 20:45 29 ********** | |
89 2014-03-26 20:46 29 ********** | |
90 2014-03-26 20:47 30 *********** | |
91 2014-03-26 20:48 30 *********** | |
92 2014-03-26 20:49 29 ********** | |
93 2014-03-26 20:50 29 ********** | |
94 2014-03-26 20:51 29 ********** | |
95 2014-03-26 20:52 28 ********* | |
96 2014-03-26 20:53 28 ********* | |
97 2014-03-26 20:54 ? - | |
98 2014-03-26 20:55 20 * | |
99 2014-03-26 20:56 ? - | |
100 2014-03-26 20:57 22 *** | |
101 2014-03-26 20:58 23 **** | |
102 2014-03-26 20:59 24 ***** | |
103 2014-03-26 21:00 25 ****** | |
104 2014-03-26 21:01 26 ******* | |
105 2014-03-26 21:02 26 ******* | |
106 2014-03-26 21:03 26 ******* | |
107 2014-03-26 21:04 27 ******** | |
108 2014-03-26 21:05 27 ******** | |
109 2014-03-26 21:06 27 ******** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 63 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 42 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 35 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 30 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 63 | |
194 Temperature_Celsius -O---- 222 222 000 - 27 (Min/Max 19/47) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 62) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "63" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "35" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "30" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "42" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "63" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "27" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "222" , | |
"worst": "222" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"device_name": "sdt" , | |
"device_node": "/dev/sdt" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824262C5YS5D" | |
} , | |
"host_information": { | |
"boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"device_name": "sdt" , | |
"device_node": "/dev/sdt" , | |
"host_ip": "10.0.5.46" , | |
"last_boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"last_host_ip": "10.0.5.46" , | |
"last_known_as": "/dev/sdt" , | |
"last_machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" , | |
"machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" | |
} , | |
"host_ip": "10.0.5.46" , | |
"id": "1efc23a2-3a01-4009-8772-44cd3fb64e44" , | |
"lifetime": 100800 , | |
"machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824262C5YS5D" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824262C5YS5D | |
LU WWN Device Id: 5 000cca 6d3c2b586 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 22:08:20 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 23 Celsius | |
Power Cycle Min/Max Temperature: 22/23 Celsius | |
Lifetime Min/Max Temperature: 21/58 Celsius | |
Lifetime Average Temperature: 44 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (83) | |
SCT Error Recovery Control: | |
Read: Disabled | |
Write: 255 (25.5 seconds) | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
84 2014-03-26 20:01 52 ********************************* | |
85 2014-03-26 20:02 52 ********************************* | |
86 2014-03-26 20:03 51 ******************************** | |
87 2014-03-26 20:04 50 ******************************* | |
88 2014-03-26 20:05 50 ******************************* | |
89 2014-03-26 20:06 49 ****************************** | |
... ..( 2 skipped). .. ****************************** | |
92 2014-03-26 20:09 49 ****************************** | |
93 2014-03-26 20:10 48 ***************************** | |
94 2014-03-26 20:11 49 ****************************** | |
95 2014-03-26 20:12 50 ******************************* | |
96 2014-03-26 20:13 51 ******************************** | |
97 2014-03-26 20:14 51 ******************************** | |
98 2014-03-26 20:15 50 ******************************* | |
99 2014-03-26 20:16 50 ******************************* | |
100 2014-03-26 20:17 49 ****************************** | |
101 2014-03-26 20:18 49 ****************************** | |
102 2014-03-26 20:19 49 ****************************** | |
103 2014-03-26 20:20 50 ******************************* | |
104 2014-03-26 20:21 50 ******************************* | |
105 2014-03-26 20:22 51 ******************************** | |
106 2014-03-26 20:23 52 ********************************* | |
107 2014-03-26 20:24 51 ******************************** | |
108 2014-03-26 20:25 51 ******************************** | |
109 2014-03-26 20:26 50 ******************************* | |
110 2014-03-26 20:27 49 ****************************** | |
111 2014-03-26 20:28 49 ****************************** | |
112 2014-03-26 20:29 50 ******************************* | |
113 2014-03-26 20:30 51 ******************************** | |
114 2014-03-26 20:31 51 ******************************** | |
115 2014-03-26 20:32 52 ********************************* | |
116 2014-03-26 20:33 52 ********************************* | |
117 2014-03-26 20:34 52 ********************************* | |
118 2014-03-26 20:35 51 ******************************** | |
119 2014-03-26 20:36 50 ******************************* | |
... ..( 2 skipped). .. ******************************* | |
122 2014-03-26 20:39 50 ******************************* | |
123 2014-03-26 20:40 51 ******************************** | |
124 2014-03-26 20:41 51 ******************************** | |
125 2014-03-26 20:42 53 ********************************** | |
126 2014-03-26 20:43 53 ********************************** | |
127 2014-03-26 20:44 53 ********************************** | |
0 2014-03-26 20:45 52 ********************************* | |
1 2014-03-26 20:46 51 ******************************** | |
2 2014-03-26 20:47 50 ******************************* | |
3 2014-03-26 20:48 50 ******************************* | |
4 2014-03-26 20:49 50 ******************************* | |
5 2014-03-26 20:50 51 ******************************** | |
6 2014-03-26 20:51 52 ********************************* | |
7 2014-03-26 20:52 53 ********************************** | |
8 2014-03-26 20:53 53 ********************************** | |
9 2014-03-26 20:54 53 ********************************** | |
10 2014-03-26 20:55 52 ********************************* | |
11 2014-03-26 20:56 51 ******************************** | |
12 2014-03-26 20:57 50 ******************************* | |
13 2014-03-26 20:58 50 ******************************* | |
14 2014-03-26 20:59 50 ******************************* | |
15 2014-03-26 21:00 51 ******************************** | |
16 2014-03-26 21:01 51 ******************************** | |
17 2014-03-26 21:02 52 ********************************* | |
18 2014-03-26 21:03 53 ********************************** | |
19 2014-03-26 21:04 52 ********************************* | |
20 2014-03-26 21:05 51 ******************************** | |
21 2014-03-26 21:06 48 ***************************** | |
22 2014-03-26 21:07 42 *********************** | |
23 2014-03-26 21:08 40 ********************* | |
24 2014-03-26 21:09 39 ******************** | |
25 2014-03-26 21:10 38 ******************* | |
26 2014-03-26 21:11 37 ****************** | |
27 2014-03-26 21:12 36 ***************** | |
28 2014-03-26 21:13 36 ***************** | |
29 2014-03-26 21:14 35 **************** | |
30 2014-03-26 21:15 34 *************** | |
31 2014-03-26 21:16 34 *************** | |
32 2014-03-26 21:17 34 *************** | |
33 2014-03-26 21:18 33 ************** | |
... ..( 2 skipped). .. ************** | |
36 2014-03-26 21:21 33 ************** | |
37 2014-03-26 21:22 ? - | |
38 2014-03-26 21:23 30 *********** | |
... ..( 4 skipped). .. *********** | |
43 2014-03-26 21:28 30 *********** | |
44 2014-03-26 21:29 29 ********** | |
... ..( 2 skipped). .. ********** | |
47 2014-03-26 21:32 29 ********** | |
48 2014-03-26 21:33 ? - | |
49 2014-03-26 21:34 24 ***** | |
50 2014-03-26 21:35 25 ****** | |
51 2014-03-26 21:36 26 ******* | |
52 2014-03-26 21:37 27 ******** | |
53 2014-03-26 21:38 ? - | |
54 2014-03-26 21:39 28 ********* | |
55 2014-03-26 21:40 29 ********** | |
56 2014-03-26 21:41 30 *********** | |
57 2014-03-26 21:42 30 *********** | |
58 2014-03-26 21:43 30 *********** | |
59 2014-03-26 21:44 31 ************ | |
... ..( 3 skipped). .. ************ | |
63 2014-03-26 21:48 31 ************ | |
64 2014-03-26 21:49 32 ************* | |
... ..( 2 skipped). .. ************* | |
67 2014-03-26 21:52 32 ************* | |
68 2014-03-26 21:53 ? - | |
69 2014-03-26 21:54 32 ************* | |
70 2014-03-26 21:55 32 ************* | |
71 2014-03-26 21:56 32 ************* | |
72 2014-03-26 21:57 ? - | |
73 2014-03-26 21:58 31 ************ | |
... ..( 2 skipped). .. ************ | |
76 2014-03-26 22:01 31 ************ | |
77 2014-03-26 22:02 32 ************* | |
78 2014-03-26 22:03 ? - | |
79 2014-03-26 22:04 22 *** | |
80 2014-03-26 22:05 22 *** | |
81 2014-03-26 22:06 23 **** | |
82 2014-03-26 22:07 23 **** | |
83 2014-03-26 22:08 23 **** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 45 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 28 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 27 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 22 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 45 | |
194 Temperature_Celsius -O---- 253 253 000 - 23 (Min/Max 21/58) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 72) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "45" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "27" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "22" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "28" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "45" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "23" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"device_name": "sdw" , | |
"device_node": "/dev/sdw" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "40,020,664,320 bytes [40.0 GB]" , | |
"model": "INTEL SSDSA2BT040G3" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "BTPR317502ED040AGN" | |
} , | |
"host_information": { | |
"boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"device_name": "sdw" , | |
"device_node": "/dev/sdw" , | |
"host_ip": "10.0.5.45" , | |
"last_boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"last_host_ip": "10.0.5.45" , | |
"last_known_as": "/dev/sdw" , | |
"last_machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" | |
} , | |
"host_ip": "10.0.5.45" , | |
"id": "224457eb-385d-465c-8697-054f37cd9e3d" , | |
"lifetime": 0 , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"model": "INTEL SSDSA2BT040G3" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "BTPR317502ED040AGN" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: INTEL SSDSA2BT040G3 | |
Serial Number: BTPR317502ED040AGN | |
LU WWN Device Id: 5 001517 8f361365c | |
Firmware Version: 4PC10362 | |
User Capacity: 40,020,664,320 bytes [40.0 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 4 | |
Local Time is: Thu Mar 27 21:30:12 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
GP/S Log at address 0x01 has 1 sectors [Summary SMART error log] | |
GP/S Log at address 0x02 has 8 sectors [Comprehensive SMART error log] | |
GP/S Log at address 0x03 has 8 sectors [Ext. Comprehensive SMART error log] | |
GP/S Log at address 0x04 has 8 sectors [Device Statistics log] | |
GP/S Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP/S Log at address 0x07 has 1 sectors [Extended self-test log] | |
GP/S Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP/S Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP/S Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 4 0 Command failed due to ICRC error | |
0x0004 4 0 R_ERR response for host-to-device data FIS | |
0x0007 4 0 R_ERR response for host-to-device non-data FIS | |
0x0008 4 0 Device-to-host non-data FIS retries | |
0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 4 0 CRC errors within host-to-device FIS | |
0x000d 4 0 Non-CRC errors within host-to-device FIS | |
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC | |
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC | |
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (8 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 0 | |
Note: revision number not 1 implies that no selective self-test has ever been run | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "Error Read SCT Data Table failed: scsi error aborted command | |
Error Write SCT (Get) Error Recovery Control Command failed: scsi error unsupported field in scsi command | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
3 Spin_Up_Time -----K 100 100 000 - 0 | |
4 Start_Stop_Count ----CK 100 100 000 - 0 | |
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 0 | |
9 Power_On_Hours -O--CK 100 100 000 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 46 | |
170 Unknown_Attribute PO--CK 100 100 010 - 0 | |
171 Unknown_Attribute -O--CK 100 100 000 - 0 | |
172 Unknown_Attribute -O--CK 100 100 000 - 0 | |
183 Runtime_Bad_Block ----CK 100 100 000 - 2 | |
184 End-to-End_Error -O--CK 100 100 090 - 0 | |
187 Reported_Uncorrect -O--CK 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 31 | |
199 UDMA_CRC_Error_Count ----CK 100 100 000 - 0 | |
225 Load_Cycle_Count -O--CK 100 100 000 - 0 | |
226 Load-in_Time -O--CK 100 100 000 - 65535 | |
227 Torq-amp_Count -O--CK 100 100 000 - 65535 | |
228 Power-off_Retract_Count -O--CK 100 100 000 - 65535 | |
232 Available_Reservd_Space PO--CK 100 100 010 - 0 | |
233 Media_Wearout_Indicator -O--CK 100 100 000 - 0 | |
241 Total_LBAs_Written -O--CK 100 100 000 - 0 | |
242 Total_LBAs_Read -O--CK 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 1) seconds. | |
Offline data collection | |
capabilities: (0x75) SMART execute Offline immediate. | |
No Auto Offline data collection support. | |
Abort Offline collection upon new | |
command. | |
No Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 1) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 1) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 5 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Available_Reservd_Space": { | |
"attr_name": "Available_Reservd_Space" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "232" , | |
"threshold": "010" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"End_to_End_Error": { | |
"attr_name": "End-to-End_Error" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "184" , | |
"threshold": "090" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "225" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_in_Time": { | |
"attr_name": "Load-in_Time" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "65535" , | |
"smart_id": "226" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Media_Wearout_Indicator": { | |
"attr_name": "Media_Wearout_Indicator" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "233" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "46" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "31" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_off_Retract_Count": { | |
"attr_name": "Power-off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "65535" , | |
"smart_id": "228" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reported_Uncorrect": { | |
"attr_name": "Reported_Uncorrect" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "187" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Runtime_Bad_Block": { | |
"attr_name": "Runtime_Bad_Block" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "2" , | |
"smart_id": "183" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "-----K" , | |
"raw_value": "0" , | |
"smart_id": "3" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "0" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Torq_amp_Count": { | |
"attr_name": "Torq-amp_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "65535" , | |
"smart_id": "227" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Total_LBAs_Read": { | |
"attr_name": "Total_LBAs_Read" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "242" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Total_LBAs_Written": { | |
"attr_name": "Total_LBAs_Written" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "241" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Unknown_Attribute": { | |
"attr_name": "Unknown_Attribute" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "172" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "f371b291-08cb-471d-98a8-b82a5d8edae3" , | |
"device_name": "sdg" , | |
"device_node": "/dev/sdg" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824562C96H9M" | |
} , | |
"host_information": { | |
"boot_id": "f371b291-08cb-471d-98a8-b82a5d8edae3" , | |
"device_name": "sdg" , | |
"device_node": "/dev/sdg" , | |
"host_ip": "10.0.5.52" , | |
"last_boot_id": "f371b291-08cb-471d-98a8-b82a5d8edae3" , | |
"last_host_ip": "10.0.5.52" , | |
"last_known_as": "/dev/sdg" , | |
"last_machine_id": "e6ef0a82acee8841da89d6b14a231869" , | |
"machine_id": "e6ef0a82acee8841da89d6b14a231869" | |
} , | |
"host_ip": "10.0.5.52" , | |
"id": "236f1b3b-94f3-4f0b-acd2-2d11ab00eb44" , | |
"lifetime": 64800 , | |
"machine_id": "e6ef0a82acee8841da89d6b14a231869" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824562C96H9M" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824562C96H9M | |
LU WWN Device Id: 5 000cca 6d3c42fb7 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 20:30:40 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 21/24 Celsius | |
Lifetime Min/Max Temperature: 21/59 Celsius | |
Lifetime Average Temperature: 45 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (123) | |
SCT Error Recovery Control: | |
Read: 255 (25.5 seconds) | |
Write: 255 (25.5 seconds) | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
124 2014-03-26 18:23 54 *********************************** | |
125 2014-03-26 18:24 54 *********************************** | |
126 2014-03-26 18:25 54 *********************************** | |
127 2014-03-26 18:26 55 ************************************ | |
0 2014-03-26 18:27 54 *********************************** | |
... ..( 2 skipped). .. *********************************** | |
3 2014-03-26 18:30 54 *********************************** | |
4 2014-03-26 18:31 55 ************************************ | |
5 2014-03-26 18:32 54 *********************************** | |
... ..( 12 skipped). .. *********************************** | |
18 2014-03-26 18:45 54 *********************************** | |
19 2014-03-26 18:46 53 ********************************** | |
... ..( 5 skipped). .. ********************************** | |
25 2014-03-26 18:52 53 ********************************** | |
26 2014-03-26 18:53 54 *********************************** | |
27 2014-03-26 18:54 53 ********************************** | |
28 2014-03-26 18:55 51 ******************************** | |
29 2014-03-26 18:56 44 ************************* | |
30 2014-03-26 18:57 40 ********************* | |
31 2014-03-26 18:58 37 ****************** | |
32 2014-03-26 18:59 36 ***************** | |
33 2014-03-26 19:00 35 **************** | |
34 2014-03-26 19:01 34 *************** | |
35 2014-03-26 19:02 34 *************** | |
36 2014-03-26 19:03 34 *************** | |
37 2014-03-26 19:04 33 ************** | |
... ..( 3 skipped). .. ************** | |
41 2014-03-26 19:08 33 ************** | |
42 2014-03-26 19:09 32 ************* | |
43 2014-03-26 19:10 32 ************* | |
44 2014-03-26 19:11 ? - | |
45 2014-03-26 19:12 23 **** | |
46 2014-03-26 19:13 24 ***** | |
47 2014-03-26 19:14 25 ****** | |
48 2014-03-26 19:15 26 ******* | |
49 2014-03-26 19:16 26 ******* | |
50 2014-03-26 19:17 26 ******* | |
51 2014-03-26 19:18 27 ******** | |
... ..( 2 skipped). .. ******** | |
54 2014-03-26 19:21 27 ******** | |
55 2014-03-26 19:22 ? - | |
56 2014-03-26 19:23 27 ******** | |
... ..( 2 skipped). .. ******** | |
59 2014-03-26 19:26 27 ******** | |
60 2014-03-26 19:27 28 ********* | |
61 2014-03-26 19:28 27 ******** | |
62 2014-03-26 19:29 27 ******** | |
63 2014-03-26 19:30 28 ********* | |
64 2014-03-26 19:31 27 ******** | |
65 2014-03-26 19:32 27 ******** | |
66 2014-03-26 19:33 ? - | |
67 2014-03-26 19:34 28 ********* | |
68 2014-03-26 19:35 28 ********* | |
69 2014-03-26 19:36 28 ********* | |
70 2014-03-26 19:37 29 ********** | |
... ..( 2 skipped). .. ********** | |
73 2014-03-26 19:40 29 ********** | |
74 2014-03-26 19:41 30 *********** | |
... ..( 6 skipped). .. *********** | |
81 2014-03-26 19:48 30 *********** | |
82 2014-03-26 19:49 31 ************ | |
83 2014-03-26 19:50 30 *********** | |
84 2014-03-26 19:51 31 ************ | |
85 2014-03-26 19:52 30 *********** | |
86 2014-03-26 19:53 31 ************ | |
87 2014-03-26 19:54 30 *********** | |
88 2014-03-26 19:55 31 ************ | |
... ..( 3 skipped). .. ************ | |
92 2014-03-26 19:59 31 ************ | |
93 2014-03-26 20:00 ? - | |
94 2014-03-26 20:01 30 *********** | |
... ..( 2 skipped). .. *********** | |
97 2014-03-26 20:04 30 *********** | |
98 2014-03-26 20:05 ? - | |
99 2014-03-26 20:06 30 *********** | |
100 2014-03-26 20:07 29 ********** | |
101 2014-03-26 20:08 30 *********** | |
... ..( 2 skipped). .. *********** | |
104 2014-03-26 20:11 30 *********** | |
105 2014-03-26 20:12 ? - | |
106 2014-03-26 20:13 21 ** | |
107 2014-03-26 20:14 22 *** | |
108 2014-03-26 20:15 22 *** | |
109 2014-03-26 20:16 22 *** | |
110 2014-03-26 20:17 23 **** | |
... ..( 3 skipped). .. **** | |
114 2014-03-26 20:21 23 **** | |
115 2014-03-26 20:22 24 ***** | |
... ..( 7 skipped). .. ***** | |
123 2014-03-26 20:30 24 ***** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 17 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 18 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 15 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 12 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 17 | |
194 Temperature_Celsius -O---- 250 250 000 - 24 (Min/Max 21/59) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 099 099 000 - 65536 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 62) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "17" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "65536" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "099" , | |
"worst": "099" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "15" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "12" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "18" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "17" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "24" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "250" , | |
"worst": "250" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"device_name": "sdx" , | |
"device_node": "/dev/sdx" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824262C9BHED" | |
} , | |
"host_information": { | |
"boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"device_name": "sdx" , | |
"device_node": "/dev/sdx" , | |
"host_ip": "10.0.5.46" , | |
"last_boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"last_host_ip": "10.0.5.46" , | |
"last_known_as": "/dev/sdx" , | |
"last_machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" , | |
"machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" | |
} , | |
"host_ip": "10.0.5.46" , | |
"id": "2659016f-79fb-47ea-a5e7-c4aaa4388a8f" , | |
"lifetime": 64800 , | |
"machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824262C9BHED" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824262C9BHED | |
LU WWN Device Id: 5 000cca 6d3c44280 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 22:08:29 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 23 Celsius | |
Power Cycle Min/Max Temperature: 21/24 Celsius | |
Lifetime Min/Max Temperature: 21/53 Celsius | |
Lifetime Average Temperature: 45 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (91) | |
Error SMART WRITE LOG does not return COUNT and LBA_LOW register | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
92 2014-03-26 20:01 47 **************************** | |
93 2014-03-26 20:02 47 **************************** | |
94 2014-03-26 20:03 48 ***************************** | |
95 2014-03-26 20:04 49 ****************************** | |
96 2014-03-26 20:05 49 ****************************** | |
97 2014-03-26 20:06 48 ***************************** | |
98 2014-03-26 20:07 47 **************************** | |
99 2014-03-26 20:08 47 **************************** | |
100 2014-03-26 20:09 46 *************************** | |
101 2014-03-26 20:10 46 *************************** | |
102 2014-03-26 20:11 47 **************************** | |
103 2014-03-26 20:12 47 **************************** | |
104 2014-03-26 20:13 48 ***************************** | |
105 2014-03-26 20:14 49 ****************************** | |
106 2014-03-26 20:15 50 ******************************* | |
107 2014-03-26 20:16 51 ******************************** | |
108 2014-03-26 20:17 53 ********************************** | |
109 2014-03-26 20:18 52 ********************************* | |
110 2014-03-26 20:19 51 ******************************** | |
111 2014-03-26 20:20 51 ******************************** | |
112 2014-03-26 20:21 50 ******************************* | |
113 2014-03-26 20:22 50 ******************************* | |
114 2014-03-26 20:23 50 ******************************* | |
115 2014-03-26 20:24 49 ****************************** | |
... ..( 2 skipped). .. ****************************** | |
118 2014-03-26 20:27 49 ****************************** | |
119 2014-03-26 20:28 48 ***************************** | |
... ..( 7 skipped). .. ***************************** | |
127 2014-03-26 20:36 48 ***************************** | |
0 2014-03-26 20:37 47 **************************** | |
... ..( 5 skipped). .. **************************** | |
6 2014-03-26 20:43 47 **************************** | |
7 2014-03-26 20:44 48 ***************************** | |
8 2014-03-26 20:45 48 ***************************** | |
9 2014-03-26 20:46 48 ***************************** | |
10 2014-03-26 20:47 49 ****************************** | |
... ..( 15 skipped). .. ****************************** | |
26 2014-03-26 21:03 49 ****************************** | |
27 2014-03-26 21:04 48 ***************************** | |
28 2014-03-26 21:05 42 *********************** | |
29 2014-03-26 21:06 38 ******************* | |
30 2014-03-26 21:07 36 ***************** | |
31 2014-03-26 21:08 35 **************** | |
32 2014-03-26 21:09 34 *************** | |
33 2014-03-26 21:10 33 ************** | |
... ..( 2 skipped). .. ************** | |
36 2014-03-26 21:13 33 ************** | |
37 2014-03-26 21:14 32 ************* | |
38 2014-03-26 21:15 33 ************** | |
39 2014-03-26 21:16 32 ************* | |
40 2014-03-26 21:17 32 ************* | |
41 2014-03-26 21:18 32 ************* | |
42 2014-03-26 21:19 33 ************** | |
43 2014-03-26 21:20 32 ************* | |
44 2014-03-26 21:21 ? - | |
45 2014-03-26 21:22 23 **** | |
46 2014-03-26 21:23 24 ***** | |
47 2014-03-26 21:24 25 ****** | |
48 2014-03-26 21:25 25 ****** | |
49 2014-03-26 21:26 26 ******* | |
50 2014-03-26 21:27 26 ******* | |
51 2014-03-26 21:28 27 ******** | |
52 2014-03-26 21:29 26 ******* | |
53 2014-03-26 21:30 27 ******** | |
54 2014-03-26 21:31 ? - | |
55 2014-03-26 21:32 27 ******** | |
56 2014-03-26 21:33 27 ******** | |
57 2014-03-26 21:34 28 ********* | |
58 2014-03-26 21:35 28 ********* | |
59 2014-03-26 21:36 28 ********* | |
60 2014-03-26 21:37 29 ********** | |
61 2014-03-26 21:38 29 ********** | |
62 2014-03-26 21:39 29 ********** | |
63 2014-03-26 21:40 30 *********** | |
... ..( 3 skipped). .. *********** | |
67 2014-03-26 21:44 30 *********** | |
68 2014-03-26 21:45 31 ************ | |
... ..( 4 skipped). .. ************ | |
73 2014-03-26 21:50 31 ************ | |
74 2014-03-26 21:51 ? - | |
75 2014-03-26 21:52 30 *********** | |
76 2014-03-26 21:53 30 *********** | |
77 2014-03-26 21:54 31 ************ | |
78 2014-03-26 21:55 31 ************ | |
79 2014-03-26 21:56 ? - | |
80 2014-03-26 21:57 30 *********** | |
... ..( 4 skipped). .. *********** | |
85 2014-03-26 22:02 30 *********** | |
86 2014-03-26 22:03 ? - | |
87 2014-03-26 22:04 22 *** | |
88 2014-03-26 22:05 22 *** | |
89 2014-03-26 22:06 23 **** | |
90 2014-03-26 22:07 23 **** | |
91 2014-03-26 22:08 23 **** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 14 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 18 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 12 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 10 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 14 | |
194 Temperature_Celsius -O---- 253 253 000 - 23 (Min/Max 21/53) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 64) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "14" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "12" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "10" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "18" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "14" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "23" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "5c5c7dd6-1b3d-4e98-a597-447d22e4ff23" , | |
"device_name": "sdj" , | |
"device_node": "/dev/sdj" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE725025A9A364" , | |
"model_family": "Hitachi Travelstar 7K500" , | |
"phy_protocol": "SATA" , | |
"serial_no": "101225PCK204VJK8JABJ" | |
} , | |
"host_information": { | |
"boot_id": "5c5c7dd6-1b3d-4e98-a597-447d22e4ff23" , | |
"device_name": "sdj" , | |
"device_node": "/dev/sdj" , | |
"host_ip": "10.0.5.51" , | |
"last_boot_id": "5c5c7dd6-1b3d-4e98-a597-447d22e4ff23" , | |
"last_host_ip": "10.0.5.51" , | |
"last_known_as": "/dev/sdj" , | |
"last_machine_id": "3844bf17de8c06f75ff5fcc94bd62999" , | |
"machine_id": "3844bf17de8c06f75ff5fcc94bd62999" | |
} , | |
"host_ip": "10.0.5.51" , | |
"id": "024a83b2-0c80-4210-bfd9-61a06bcd487b" , | |
"lifetime": 111600 , | |
"machine_id": "3844bf17de8c06f75ff5fcc94bd62999" , | |
"model": "Hitachi HTE725025A9A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "101225PCK204VJK8JABJ" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Model Family: Hitachi Travelstar 7K500 | |
Device Model: Hitachi HTE725025A9A364 | |
Serial Number: 101225PCK204VJK8JABJ | |
LU WWN Device Id: 5 000cca 5b8ee26cc | |
Firmware Version: PC2OC70E | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 23:09:00 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Disabled | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 25 Celsius | |
Power Cycle Min/Max Temperature: 22/25 Celsius | |
Lifetime Min/Max Temperature: 20/57 Celsius | |
Lifetime Average Temperature: 34 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 5/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 478 (73) | |
Error SMART WRITE LOG does not return COUNT and LBA_LOW register | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
74 2014-03-26 15:12 35 **************** | |
... ..( 5 skipped). .. **************** | |
80 2014-03-26 15:18 35 **************** | |
81 2014-03-26 15:19 36 ***************** | |
82 2014-03-26 15:20 36 ***************** | |
83 2014-03-26 15:21 35 **************** | |
... ..( 4 skipped). .. **************** | |
88 2014-03-26 15:26 35 **************** | |
89 2014-03-26 15:27 34 *************** | |
... ..( 3 skipped). .. *************** | |
93 2014-03-26 15:31 34 *************** | |
94 2014-03-26 15:32 33 ************** | |
95 2014-03-26 15:33 33 ************** | |
96 2014-03-26 15:34 33 ************** | |
97 2014-03-26 15:35 29 ********** | |
98 2014-03-26 15:36 29 ********** | |
99 2014-03-26 15:37 29 ********** | |
100 2014-03-26 15:38 30 *********** | |
101 2014-03-26 15:39 30 *********** | |
102 2014-03-26 15:40 31 ************ | |
103 2014-03-26 15:41 31 ************ | |
104 2014-03-26 15:42 31 ************ | |
105 2014-03-26 15:43 32 ************* | |
... ..( 2 skipped). .. ************* | |
108 2014-03-26 15:46 32 ************* | |
109 2014-03-26 15:47 33 ************** | |
... ..( 4 skipped). .. ************** | |
114 2014-03-26 15:52 33 ************** | |
115 2014-03-26 15:53 34 *************** | |
... ..( 23 skipped). .. *************** | |
139 2014-03-26 16:17 34 *************** | |
140 2014-03-26 16:18 33 ************** | |
... ..( 8 skipped). .. ************** | |
149 2014-03-26 16:27 33 ************** | |
150 2014-03-26 16:28 22 *** | |
151 2014-03-26 16:29 22 *** | |
152 2014-03-26 16:30 23 **** | |
153 2014-03-26 16:31 24 ***** | |
154 2014-03-26 16:32 25 ****** | |
155 2014-03-26 16:33 25 ****** | |
156 2014-03-26 16:34 25 ****** | |
157 2014-03-26 16:35 26 ******* | |
... ..( 4 skipped). .. ******* | |
162 2014-03-26 16:40 26 ******* | |
163 2014-03-26 16:41 27 ******** | |
... ..( 2 skipped). .. ******** | |
166 2014-03-26 16:44 27 ******** | |
167 2014-03-26 16:45 28 ********* | |
168 2014-03-26 16:46 28 ********* | |
169 2014-03-26 16:47 29 ********** | |
... ..( 7 skipped). .. ********** | |
177 2014-03-26 16:55 29 ********** | |
178 2014-03-26 16:56 28 ********* | |
179 2014-03-26 16:57 28 ********* | |
180 2014-03-26 16:58 29 ********** | |
... ..( 5 skipped). .. ********** | |
186 2014-03-26 17:04 29 ********** | |
187 2014-03-26 17:05 25 ****** | |
188 2014-03-26 17:06 25 ****** | |
189 2014-03-26 17:07 26 ******* | |
190 2014-03-26 17:08 27 ******** | |
191 2014-03-26 17:09 28 ********* | |
192 2014-03-26 17:10 29 ********** | |
193 2014-03-26 17:11 29 ********** | |
194 2014-03-26 17:12 30 *********** | |
195 2014-03-26 17:13 30 *********** | |
196 2014-03-26 17:14 31 ************ | |
197 2014-03-26 17:15 31 ************ | |
198 2014-03-26 17:16 31 ************ | |
199 2014-03-26 17:17 32 ************* | |
... ..( 3 skipped). .. ************* | |
203 2014-03-26 17:21 32 ************* | |
204 2014-03-26 17:22 31 ************ | |
... ..( 4 skipped). .. ************ | |
209 2014-03-26 17:27 31 ************ | |
210 2014-03-26 17:28 32 ************* | |
... ..( 5 skipped). .. ************* | |
216 2014-03-26 17:34 32 ************* | |
217 2014-03-26 17:35 33 ************** | |
218 2014-03-26 17:36 32 ************* | |
... ..( 20 skipped). .. ************* | |
239 2014-03-26 17:57 32 ************* | |
240 2014-03-26 17:58 33 ************** | |
241 2014-03-26 17:59 33 ************** | |
242 2014-03-26 18:00 34 *************** | |
243 2014-03-26 18:01 35 **************** | |
244 2014-03-26 18:02 35 **************** | |
245 2014-03-26 18:03 36 ***************** | |
... ..( 6 skipped). .. ***************** | |
252 2014-03-26 18:10 36 ***************** | |
253 2014-03-26 18:11 37 ****************** | |
... ..( 13 skipped). .. ****************** | |
267 2014-03-26 18:25 37 ****************** | |
268 2014-03-26 18:26 36 ***************** | |
269 2014-03-26 18:27 36 ***************** | |
270 2014-03-26 18:28 37 ****************** | |
271 2014-03-26 18:29 37 ****************** | |
272 2014-03-26 18:30 38 ******************* | |
273 2014-03-26 18:31 39 ******************** | |
274 2014-03-26 18:32 40 ********************* | |
275 2014-03-26 18:33 41 ********************** | |
276 2014-03-26 18:34 42 *********************** | |
277 2014-03-26 18:35 42 *********************** | |
278 2014-03-26 18:36 43 ************************ | |
279 2014-03-26 18:37 44 ************************* | |
280 2014-03-26 18:38 45 ************************** | |
281 2014-03-26 18:39 46 *************************** | |
282 2014-03-26 18:40 47 **************************** | |
283 2014-03-26 18:41 47 **************************** | |
284 2014-03-26 18:42 48 ***************************** | |
285 2014-03-26 18:43 48 ***************************** | |
286 2014-03-26 18:44 49 ****************************** | |
287 2014-03-26 18:45 50 ******************************* | |
288 2014-03-26 18:46 49 ****************************** | |
289 2014-03-26 18:47 48 ***************************** | |
... ..( 2 skipped). .. ***************************** | |
292 2014-03-26 18:50 48 ***************************** | |
293 2014-03-26 18:51 47 **************************** | |
... ..( 3 skipped). .. **************************** | |
297 2014-03-26 18:55 47 **************************** | |
298 2014-03-26 18:56 46 *************************** | |
299 2014-03-26 18:57 46 *************************** | |
300 2014-03-26 18:58 45 ************************** | |
301 2014-03-26 18:59 41 ********************** | |
302 2014-03-26 19:00 39 ******************** | |
303 2014-03-26 19:01 38 ******************* | |
304 2014-03-26 19:02 36 ***************** | |
... ..( 4 skipped). .. ***************** | |
309 2014-03-26 19:07 36 ***************** | |
310 2014-03-26 19:08 35 **************** | |
311 2014-03-26 19:09 35 **************** | |
312 2014-03-26 19:10 35 **************** | |
313 2014-03-26 19:11 34 *************** | |
314 2014-03-26 19:12 34 *************** | |
315 2014-03-26 19:13 34 *************** | |
316 2014-03-26 19:14 35 **************** | |
317 2014-03-26 19:15 35 **************** | |
318 2014-03-26 19:16 36 ***************** | |
319 2014-03-26 19:17 35 **************** | |
... ..( 6 skipped). .. **************** | |
326 2014-03-26 19:24 35 **************** | |
327 2014-03-26 19:25 36 ***************** | |
... ..( 2 skipped). .. ***************** | |
330 2014-03-26 19:28 36 ***************** | |
331 2014-03-26 19:29 35 **************** | |
332 2014-03-26 19:30 35 **************** | |
333 2014-03-26 19:31 36 ***************** | |
334 2014-03-26 19:32 37 ****************** | |
335 2014-03-26 19:33 38 ******************* | |
336 2014-03-26 19:34 39 ******************** | |
337 2014-03-26 19:35 40 ********************* | |
338 2014-03-26 19:36 41 ********************** | |
339 2014-03-26 19:37 42 *********************** | |
340 2014-03-26 19:38 43 ************************ | |
341 2014-03-26 19:39 44 ************************* | |
342 2014-03-26 19:40 45 ************************** | |
343 2014-03-26 19:41 46 *************************** | |
344 2014-03-26 19:42 47 **************************** | |
345 2014-03-26 19:43 48 ***************************** | |
346 2014-03-26 19:44 48 ***************************** | |
347 2014-03-26 19:45 50 ******************************* | |
348 2014-03-26 19:46 51 ******************************** | |
349 2014-03-26 19:47 51 ******************************** | |
350 2014-03-26 19:48 52 ********************************* | |
351 2014-03-26 19:49 53 ********************************** | |
352 2014-03-26 19:50 53 ********************************** | |
353 2014-03-26 19:51 54 *********************************** | |
354 2014-03-26 19:52 54 *********************************** | |
355 2014-03-26 19:53 55 ************************************ | |
356 2014-03-26 19:54 56 ************************************* | |
357 2014-03-26 19:55 56 ************************************* | |
358 2014-03-26 19:56 57 ************************************** | |
... ..( 2 skipped). .. ************************************** | |
361 2014-03-26 19:59 57 ************************************** | |
362 2014-03-26 20:00 56 ************************************* | |
363 2014-03-26 20:01 54 *********************************** | |
364 2014-03-26 20:02 53 ********************************** | |
365 2014-03-26 20:03 53 ********************************** | |
366 2014-03-26 20:04 52 ********************************* | |
367 2014-03-26 20:05 52 ********************************* | |
368 2014-03-26 20:06 53 ********************************** | |
369 2014-03-26 20:07 53 ********************************** | |
370 2014-03-26 20:08 54 *********************************** | |
371 2014-03-26 20:09 53 ********************************** | |
372 2014-03-26 20:10 52 ********************************* | |
373 2014-03-26 20:11 52 ********************************* | |
374 2014-03-26 20:12 51 ******************************** | |
375 2014-03-26 20:13 50 ******************************* | |
376 2014-03-26 20:14 51 ******************************** | |
377 2014-03-26 20:15 51 ******************************** | |
378 2014-03-26 20:16 52 ********************************* | |
379 2014-03-26 20:17 52 ********************************* | |
380 2014-03-26 20:18 53 ********************************** | |
381 2014-03-26 20:19 52 ********************************* | |
382 2014-03-26 20:20 52 ********************************* | |
383 2014-03-26 20:21 51 ******************************** | |
384 2014-03-26 20:22 50 ******************************* | |
385 2014-03-26 20:23 50 ******************************* | |
386 2014-03-26 20:24 51 ******************************** | |
387 2014-03-26 20:25 52 ********************************* | |
388 2014-03-26 20:26 52 ********************************* | |
389 2014-03-26 20:27 53 ********************************** | |
390 2014-03-26 20:28 53 ********************************** | |
391 2014-03-26 20:29 52 ********************************* | |
392 2014-03-26 20:30 51 ******************************** | |
393 2014-03-26 20:31 50 ******************************* | |
... ..( 2 skipped). .. ******************************* | |
396 2014-03-26 20:34 50 ******************************* | |
397 2014-03-26 20:35 51 ******************************** | |
398 2014-03-26 20:36 51 ******************************** | |
399 2014-03-26 20:37 52 ********************************* | |
400 2014-03-26 20:38 53 ********************************** | |
401 2014-03-26 20:39 53 ********************************** | |
402 2014-03-26 20:40 52 ********************************* | |
403 2014-03-26 20:41 51 ******************************** | |
404 2014-03-26 20:42 51 ******************************** | |
405 2014-03-26 20:43 50 ******************************* | |
406 2014-03-26 20:44 51 ******************************** | |
407 2014-03-26 20:45 51 ******************************** | |
408 2014-03-26 20:46 52 ********************************* | |
409 2014-03-26 20:47 53 ********************************** | |
410 2014-03-26 20:48 53 ********************************** | |
411 2014-03-26 20:49 53 ********************************** | |
412 2014-03-26 20:50 52 ********************************* | |
413 2014-03-26 20:51 51 ******************************** | |
414 2014-03-26 20:52 50 ******************************* | |
415 2014-03-26 20:53 50 ******************************* | |
416 2014-03-26 20:54 50 ******************************* | |
417 2014-03-26 20:55 51 ******************************** | |
418 2014-03-26 20:56 52 ********************************* | |
419 2014-03-26 20:57 52 ********************************* | |
420 2014-03-26 20:58 52 ********************************* | |
421 2014-03-26 20:59 51 ******************************** | |
422 2014-03-26 21:00 50 ******************************* | |
423 2014-03-26 21:01 50 ******************************* | |
424 2014-03-26 21:02 50 ******************************* | |
425 2014-03-26 21:03 49 ****************************** | |
426 2014-03-26 21:04 49 ****************************** | |
427 2014-03-26 21:05 50 ******************************* | |
428 2014-03-26 21:06 50 ******************************* | |
429 2014-03-26 21:07 51 ******************************** | |
430 2014-03-26 21:08 52 ********************************* | |
431 2014-03-26 21:09 51 ******************************** | |
432 2014-03-26 21:10 51 ******************************** | |
433 2014-03-26 21:11 50 ******************************* | |
... ..( 2 skipped). .. ******************************* | |
436 2014-03-26 21:14 50 ******************************* | |
437 2014-03-26 21:15 51 ******************************** | |
438 2014-03-26 21:16 52 ********************************* | |
439 2014-03-26 21:17 53 ********************************** | |
440 2014-03-26 21:18 53 ********************************** | |
441 2014-03-26 21:19 53 ********************************** | |
442 2014-03-26 21:20 52 ********************************* | |
443 2014-03-26 21:21 51 ******************************** | |
444 2014-03-26 21:22 51 ******************************** | |
445 2014-03-26 21:23 50 ******************************* | |
446 2014-03-26 21:24 50 ******************************* | |
447 2014-03-26 21:25 51 ******************************** | |
448 2014-03-26 21:26 51 ******************************** | |
449 2014-03-26 21:27 52 ********************************* | |
450 2014-03-26 21:28 53 ********************************** | |
451 2014-03-26 21:29 52 ********************************* | |
452 2014-03-26 21:30 51 ******************************** | |
453 2014-03-26 21:31 50 ******************************* | |
... ..( 4 skipped). .. ******************************* | |
458 2014-03-26 21:36 50 ******************************* | |
459 2014-03-26 21:37 51 ******************************** | |
460 2014-03-26 21:38 52 ********************************* | |
461 2014-03-26 21:39 53 ********************************** | |
462 2014-03-26 21:40 52 ********************************* | |
463 2014-03-26 21:41 52 ********************************* | |
464 2014-03-26 21:42 51 ******************************** | |
465 2014-03-26 21:43 50 ******************************* | |
466 2014-03-26 21:44 50 ******************************* | |
467 2014-03-26 21:45 51 ******************************** | |
468 2014-03-26 21:46 51 ******************************** | |
469 2014-03-26 21:47 52 ********************************* | |
470 2014-03-26 21:48 53 ********************************** | |
471 2014-03-26 21:49 53 ********************************** | |
472 2014-03-26 21:50 52 ********************************* | |
473 2014-03-26 21:51 52 ********************************* | |
474 2014-03-26 21:52 51 ******************************** | |
475 2014-03-26 21:53 50 ******************************* | |
... ..( 2 skipped). .. ******************************* | |
0 2014-03-26 21:56 50 ******************************* | |
1 2014-03-26 21:57 51 ******************************** | |
2 2014-03-26 21:58 51 ******************************** | |
3 2014-03-26 21:59 52 ********************************* | |
4 2014-03-26 22:00 53 ********************************** | |
5 2014-03-26 22:01 53 ********************************** | |
6 2014-03-26 22:02 52 ********************************* | |
7 2014-03-26 22:03 47 **************************** | |
8 2014-03-26 22:04 43 ************************ | |
9 2014-03-26 22:05 42 *********************** | |
10 2014-03-26 22:06 41 ********************** | |
11 2014-03-26 22:07 40 ********************* | |
12 2014-03-26 22:08 39 ******************** | |
13 2014-03-26 22:09 38 ******************* | |
14 2014-03-26 22:10 37 ****************** | |
15 2014-03-26 22:11 37 ****************** | |
16 2014-03-26 22:12 37 ****************** | |
17 2014-03-26 22:13 36 ***************** | |
18 2014-03-26 22:14 36 ***************** | |
19 2014-03-26 22:15 36 ***************** | |
20 2014-03-26 22:16 33 ************** | |
21 2014-03-26 22:17 33 ************** | |
22 2014-03-26 22:18 33 ************** | |
23 2014-03-26 22:19 32 ************* | |
24 2014-03-26 22:20 33 ************** | |
... ..( 5 skipped). .. ************** | |
30 2014-03-26 22:26 33 ************** | |
31 2014-03-26 22:27 24 ***** | |
32 2014-03-26 22:28 24 ***** | |
33 2014-03-26 22:29 25 ****** | |
34 2014-03-26 22:30 26 ******* | |
35 2014-03-26 22:31 27 ******** | |
36 2014-03-26 22:32 28 ********* | |
37 2014-03-26 22:33 29 ********** | |
38 2014-03-26 22:34 29 ********** | |
39 2014-03-26 22:35 29 ********** | |
40 2014-03-26 22:36 30 *********** | |
41 2014-03-26 22:37 30 *********** | |
42 2014-03-26 22:38 30 *********** | |
43 2014-03-26 22:39 31 ************ | |
... ..( 3 skipped). .. ************ | |
47 2014-03-26 22:43 31 ************ | |
48 2014-03-26 22:44 32 ************* | |
... ..( 11 skipped). .. ************* | |
60 2014-03-26 22:56 32 ************* | |
61 2014-03-26 22:57 31 ************ | |
62 2014-03-26 22:58 31 ************ | |
63 2014-03-26 22:59 31 ************ | |
64 2014-03-26 23:00 32 ************* | |
65 2014-03-26 23:01 22 *** | |
66 2014-03-26 23:02 22 *** | |
67 2014-03-26 23:03 23 **** | |
68 2014-03-26 23:04 24 ***** | |
69 2014-03-26 23:05 24 ***** | |
70 2014-03-26 23:06 24 ***** | |
71 2014-03-26 23:07 25 ****** | |
72 2014-03-26 23:08 25 ****** | |
73 2014-03-26 23:09 25 ****** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 52 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 31 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 33 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 26 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 53 | |
194 Temperature_Celsius -O---- 220 220 000 - 25 (Min/Max 20/57) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 645) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 67) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "53" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "33" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "26" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "31" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "52" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "25" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "220" , | |
"worst": "220" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"device_name": "sdr" , | |
"device_node": "/dev/sdr" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824262C9DNVD" | |
} , | |
"host_information": { | |
"boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"device_name": "sdr" , | |
"device_node": "/dev/sdr" , | |
"host_ip": "10.0.5.45" , | |
"last_boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"last_host_ip": "10.0.5.45" , | |
"last_known_as": "/dev/sdr" , | |
"last_machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" | |
} , | |
"host_ip": "10.0.5.45" , | |
"id": "03088956-135b-4952-88fb-10ad3670e3da" , | |
"lifetime": 129600 , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824262C9DNVD" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824262C9DNVD | |
LU WWN Device Id: 5 000cca 6d3c446e9 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 21:05:33 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 20/24 Celsius | |
Lifetime Min/Max Temperature: 20/63 Celsius | |
Lifetime Average Temperature: 47 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (29) | |
Error Write SCT (Get) Error Recovery Control Command failed: scsi error unsupported field in scsi command | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
30 2014-03-26 18:58 50 ******************************* | |
31 2014-03-26 18:59 50 ******************************* | |
32 2014-03-26 19:00 49 ****************************** | |
33 2014-03-26 19:01 50 ******************************* | |
34 2014-03-26 19:02 50 ******************************* | |
35 2014-03-26 19:03 50 ******************************* | |
36 2014-03-26 19:04 51 ******************************** | |
37 2014-03-26 19:05 52 ********************************* | |
38 2014-03-26 19:06 54 *********************************** | |
39 2014-03-26 19:07 54 *********************************** | |
40 2014-03-26 19:08 54 *********************************** | |
41 2014-03-26 19:09 53 ********************************** | |
42 2014-03-26 19:10 52 ********************************* | |
... ..( 3 skipped). .. ********************************* | |
46 2014-03-26 19:14 52 ********************************* | |
47 2014-03-26 19:15 51 ******************************** | |
... ..( 3 skipped). .. ******************************** | |
51 2014-03-26 19:19 51 ******************************** | |
52 2014-03-26 19:20 50 ******************************* | |
... ..( 9 skipped). .. ******************************* | |
62 2014-03-26 19:30 50 ******************************* | |
63 2014-03-26 19:31 49 ****************************** | |
64 2014-03-26 19:32 50 ******************************* | |
65 2014-03-26 19:33 50 ******************************* | |
66 2014-03-26 19:34 50 ******************************* | |
67 2014-03-26 19:35 49 ****************************** | |
68 2014-03-26 19:36 50 ******************************* | |
69 2014-03-26 19:37 50 ******************************* | |
70 2014-03-26 19:38 49 ****************************** | |
71 2014-03-26 19:39 49 ****************************** | |
72 2014-03-26 19:40 49 ****************************** | |
73 2014-03-26 19:41 50 ******************************* | |
... ..( 3 skipped). .. ******************************* | |
77 2014-03-26 19:45 50 ******************************* | |
78 2014-03-26 19:46 51 ******************************** | |
... ..( 10 skipped). .. ******************************** | |
89 2014-03-26 19:57 51 ******************************** | |
90 2014-03-26 19:58 49 ****************************** | |
91 2014-03-26 19:59 42 *********************** | |
92 2014-03-26 20:00 38 ******************* | |
93 2014-03-26 20:01 36 ***************** | |
94 2014-03-26 20:02 35 **************** | |
95 2014-03-26 20:03 34 *************** | |
96 2014-03-26 20:04 33 ************** | |
97 2014-03-26 20:05 33 ************** | |
98 2014-03-26 20:06 33 ************** | |
99 2014-03-26 20:07 32 ************* | |
... ..( 5 skipped). .. ************* | |
105 2014-03-26 20:13 32 ************* | |
106 2014-03-26 20:14 ? - | |
107 2014-03-26 20:15 23 **** | |
108 2014-03-26 20:16 24 ***** | |
109 2014-03-26 20:17 25 ****** | |
110 2014-03-26 20:18 25 ****** | |
111 2014-03-26 20:19 26 ******* | |
112 2014-03-26 20:20 26 ******* | |
113 2014-03-26 20:21 27 ******** | |
114 2014-03-26 20:22 27 ******** | |
115 2014-03-26 20:23 27 ******** | |
116 2014-03-26 20:24 ? - | |
117 2014-03-26 20:25 27 ******** | |
118 2014-03-26 20:26 28 ********* | |
119 2014-03-26 20:27 28 ********* | |
120 2014-03-26 20:28 28 ********* | |
121 2014-03-26 20:29 29 ********** | |
122 2014-03-26 20:30 29 ********** | |
123 2014-03-26 20:31 29 ********** | |
124 2014-03-26 20:32 30 *********** | |
... ..( 9 skipped). .. *********** | |
6 2014-03-26 20:42 30 *********** | |
7 2014-03-26 20:43 ? - | |
8 2014-03-26 20:44 30 *********** | |
... ..( 2 skipped). .. *********** | |
11 2014-03-26 20:47 30 *********** | |
12 2014-03-26 20:48 ? - | |
13 2014-03-26 20:49 30 *********** | |
14 2014-03-26 20:50 29 ********** | |
15 2014-03-26 20:51 30 *********** | |
... ..( 3 skipped). .. *********** | |
19 2014-03-26 20:55 30 *********** | |
20 2014-03-26 20:56 ? - | |
21 2014-03-26 20:57 21 ** | |
22 2014-03-26 20:58 22 *** | |
23 2014-03-26 20:59 22 *** | |
24 2014-03-26 21:00 23 **** | |
25 2014-03-26 21:01 23 **** | |
26 2014-03-26 21:02 23 **** | |
27 2014-03-26 21:03 24 ***** | |
28 2014-03-26 21:04 24 ***** | |
29 2014-03-26 21:05 23 **** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 43 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 36 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 39 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 31 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 43 | |
194 Temperature_Celsius -O---- 253 253 000 - 23 (Min/Max 20/63) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 62) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "43" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "39" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "31" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "36" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "43" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "23" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"device_name": "sdv" , | |
"device_node": "/dev/sdv" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824562C8WKNM" | |
} , | |
"host_information": { | |
"boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"device_name": "sdv" , | |
"device_node": "/dev/sdv" , | |
"host_ip": "10.0.5.46" , | |
"last_boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"last_host_ip": "10.0.5.46" , | |
"last_known_as": "/dev/sdv" , | |
"last_machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" , | |
"machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" | |
} , | |
"host_ip": "10.0.5.46" , | |
"id": "044ca783-ba4d-4ea3-a9b5-98f1e40f094e" , | |
"lifetime": 72000 , | |
"machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824562C8WKNM" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824562C8WKNM | |
LU WWN Device Id: 5 000cca 6d3c40a76 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 22:08:17 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 21/24 Celsius | |
Lifetime Min/Max Temperature: 21/56 Celsius | |
Lifetime Average Temperature: 44 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (72) | |
Error Write SCT (Get) Error Recovery Control Command failed: scsi error unsupported scsi opcode | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
73 2014-03-26 20:01 51 ******************************** | |
74 2014-03-26 20:02 51 ******************************** | |
75 2014-03-26 20:03 51 ******************************** | |
76 2014-03-26 20:04 50 ******************************* | |
77 2014-03-26 20:05 51 ******************************** | |
... ..( 2 skipped). .. ******************************** | |
80 2014-03-26 20:08 51 ******************************** | |
81 2014-03-26 20:09 50 ******************************* | |
... ..( 8 skipped). .. ******************************* | |
90 2014-03-26 20:18 50 ******************************* | |
91 2014-03-26 20:19 49 ****************************** | |
... ..( 15 skipped). .. ****************************** | |
107 2014-03-26 20:35 49 ****************************** | |
108 2014-03-26 20:36 47 **************************** | |
109 2014-03-26 20:37 41 ********************** | |
110 2014-03-26 20:38 38 ******************* | |
111 2014-03-26 20:39 36 ***************** | |
112 2014-03-26 20:40 34 *************** | |
113 2014-03-26 20:41 34 *************** | |
114 2014-03-26 20:42 33 ************** | |
... ..( 2 skipped). .. ************** | |
117 2014-03-26 20:45 33 ************** | |
118 2014-03-26 20:46 32 ************* | |
... ..( 3 skipped). .. ************* | |
122 2014-03-26 20:50 32 ************* | |
123 2014-03-26 20:51 ? - | |
124 2014-03-26 20:52 28 ********* | |
... ..( 7 skipped). .. ********* | |
4 2014-03-26 21:00 28 ********* | |
5 2014-03-26 21:01 ? - | |
6 2014-03-26 21:02 28 ********* | |
7 2014-03-26 21:03 28 ********* | |
8 2014-03-26 21:04 29 ********** | |
9 2014-03-26 21:05 29 ********** | |
10 2014-03-26 21:06 30 *********** | |
... ..( 2 skipped). .. *********** | |
13 2014-03-26 21:09 30 *********** | |
14 2014-03-26 21:10 31 ************ | |
... ..( 11 skipped). .. ************ | |
26 2014-03-26 21:22 31 ************ | |
27 2014-03-26 21:23 32 ************* | |
... ..( 7 skipped). .. ************* | |
35 2014-03-26 21:31 32 ************* | |
36 2014-03-26 21:32 31 ************ | |
37 2014-03-26 21:33 32 ************* | |
38 2014-03-26 21:34 31 ************ | |
... ..( 9 skipped). .. ************ | |
48 2014-03-26 21:44 31 ************ | |
49 2014-03-26 21:45 ? - | |
50 2014-03-26 21:46 30 *********** | |
... ..( 2 skipped). .. *********** | |
53 2014-03-26 21:49 30 *********** | |
54 2014-03-26 21:50 31 ************ | |
... ..( 4 skipped). .. ************ | |
59 2014-03-26 21:55 31 ************ | |
60 2014-03-26 21:56 ? - | |
61 2014-03-26 21:57 30 *********** | |
62 2014-03-26 21:58 30 *********** | |
63 2014-03-26 21:59 30 *********** | |
64 2014-03-26 22:00 31 ************ | |
65 2014-03-26 22:01 30 *********** | |
66 2014-03-26 22:02 31 ************ | |
67 2014-03-26 22:03 ? - | |
68 2014-03-26 22:04 22 *** | |
69 2014-03-26 22:05 22 *** | |
70 2014-03-26 22:06 23 **** | |
71 2014-03-26 22:07 23 **** | |
72 2014-03-26 22:08 23 **** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 34 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 20 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 32 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 25 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 34 | |
194 Temperature_Celsius -O---- 253 253 000 - 23 (Min/Max 21/56) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 61) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "34" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "32" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "25" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "20" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "34" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "23" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"device_name": "sdq" , | |
"device_node": "/dev/sdq" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E382456202V73N" | |
} , | |
"host_information": { | |
"boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"device_name": "sdq" , | |
"device_node": "/dev/sdq" , | |
"host_ip": "10.0.5.46" , | |
"last_boot_id": "a0091427-0f36-4b4f-94e5-41d4f8221afe" , | |
"last_host_ip": "10.0.5.46" , | |
"last_known_as": "/dev/sdq" , | |
"last_machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" , | |
"machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" | |
} , | |
"host_ip": "10.0.5.46" , | |
"id": "054d24b9-cb0a-4376-9526-0b47023484ec" , | |
"lifetime": 64800 , | |
"machine_id": "0269f58ccd70b0a64d9f874a49e07ae5" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E382456202V73N" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E382456202V73N | |
LU WWN Device Id: 5 000cca 6dbc14b34 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 22:08:14 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 23 Celsius | |
Power Cycle Min/Max Temperature: 21/23 Celsius | |
Lifetime Min/Max Temperature: 21/67 Celsius | |
Lifetime Average Temperature: 45 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (114) | |
SCT Error Recovery Control: | |
Read: Disabled | |
Write: Disabled | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
115 2014-03-26 20:01 49 ****************************** | |
... ..( 9 skipped). .. ****************************** | |
125 2014-03-26 20:11 49 ****************************** | |
126 2014-03-26 20:12 48 ***************************** | |
... ..( 6 skipped). .. ***************************** | |
5 2014-03-26 20:19 48 ***************************** | |
6 2014-03-26 20:20 47 **************************** | |
7 2014-03-26 20:21 47 **************************** | |
8 2014-03-26 20:22 48 ***************************** | |
9 2014-03-26 20:23 47 **************************** | |
10 2014-03-26 20:24 47 **************************** | |
11 2014-03-26 20:25 48 ***************************** | |
12 2014-03-26 20:26 48 ***************************** | |
13 2014-03-26 20:27 49 ****************************** | |
... ..( 14 skipped). .. ****************************** | |
28 2014-03-26 20:42 49 ****************************** | |
29 2014-03-26 20:43 43 ************************ | |
30 2014-03-26 20:44 38 ******************* | |
31 2014-03-26 20:45 36 ***************** | |
32 2014-03-26 20:46 34 *************** | |
33 2014-03-26 20:47 34 *************** | |
34 2014-03-26 20:48 33 ************** | |
35 2014-03-26 20:49 33 ************** | |
36 2014-03-26 20:50 33 ************** | |
37 2014-03-26 20:51 32 ************* | |
38 2014-03-26 20:52 33 ************** | |
39 2014-03-26 20:53 32 ************* | |
... ..( 2 skipped). .. ************* | |
42 2014-03-26 20:56 32 ************* | |
43 2014-03-26 20:57 ? - | |
44 2014-03-26 20:58 24 ***** | |
45 2014-03-26 20:59 25 ****** | |
46 2014-03-26 21:00 25 ****** | |
47 2014-03-26 21:01 26 ******* | |
48 2014-03-26 21:02 26 ******* | |
49 2014-03-26 21:03 27 ******** | |
... ..( 2 skipped). .. ******** | |
52 2014-03-26 21:06 27 ******** | |
53 2014-03-26 21:07 ? - | |
54 2014-03-26 21:08 27 ******** | |
55 2014-03-26 21:09 28 ********* | |
56 2014-03-26 21:10 28 ********* | |
57 2014-03-26 21:11 29 ********** | |
... ..( 4 skipped). .. ********** | |
62 2014-03-26 21:16 29 ********** | |
63 2014-03-26 21:17 30 *********** | |
... ..( 5 skipped). .. *********** | |
69 2014-03-26 21:23 30 *********** | |
70 2014-03-26 21:24 31 ************ | |
71 2014-03-26 21:25 31 ************ | |
72 2014-03-26 21:26 30 *********** | |
73 2014-03-26 21:27 30 *********** | |
74 2014-03-26 21:28 30 *********** | |
75 2014-03-26 21:29 31 ************ | |
... ..( 6 skipped). .. ************ | |
82 2014-03-26 21:36 31 ************ | |
83 2014-03-26 21:37 30 *********** | |
84 2014-03-26 21:38 31 ************ | |
85 2014-03-26 21:39 31 ************ | |
86 2014-03-26 21:40 30 *********** | |
87 2014-03-26 21:41 31 ************ | |
88 2014-03-26 21:42 31 ************ | |
89 2014-03-26 21:43 31 ************ | |
90 2014-03-26 21:44 30 *********** | |
91 2014-03-26 21:45 ? - | |
92 2014-03-26 21:46 29 ********** | |
93 2014-03-26 21:47 29 ********** | |
94 2014-03-26 21:48 30 *********** | |
... ..( 6 skipped). .. *********** | |
101 2014-03-26 21:55 30 *********** | |
102 2014-03-26 21:56 ? - | |
103 2014-03-26 21:57 30 *********** | |
... ..( 4 skipped). .. *********** | |
108 2014-03-26 22:02 30 *********** | |
109 2014-03-26 22:03 ? - | |
110 2014-03-26 22:04 21 ** | |
111 2014-03-26 22:05 22 *** | |
112 2014-03-26 22:06 22 *** | |
113 2014-03-26 22:07 23 **** | |
114 2014-03-26 22:08 23 **** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 14 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 18 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 12 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 9 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 14 | |
194 Temperature_Celsius -O---- 253 253 000 - 23 (Min/Max 21/67) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 62) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "14" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "12" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "9" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "18" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "14" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "23" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "2555c20b-6f7f-4c7d-8a4c-8e53df6e567f" , | |
"device_name": "sdad" , | |
"device_node": "/dev/sdad" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824562C5BDEK" | |
} , | |
"host_information": { | |
"boot_id": "2555c20b-6f7f-4c7d-8a4c-8e53df6e567f" , | |
"device_name": "sdad" , | |
"device_node": "/dev/sdad" , | |
"host_ip": "10.0.5.51" , | |
"last_boot_id": "2555c20b-6f7f-4c7d-8a4c-8e53df6e567f" , | |
"last_host_ip": "10.0.5.51" , | |
"last_known_as": "/dev/sdad" , | |
"last_machine_id": "3844bf17de8c06f75ff5fcc94bd62999" , | |
"machine_id": "3844bf17de8c06f75ff5fcc94bd62999" | |
} , | |
"host_ip": "10.0.5.51" , | |
"id": "059901b4-1f71-477b-8c8b-f0ba66e8e8d3" , | |
"lifetime": 64800 , | |
"machine_id": "3844bf17de8c06f75ff5fcc94bd62999" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824562C5BDEK" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824562C5BDEK | |
LU WWN Device Id: 5 000cca 6d3c270a7 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 18:34:34 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 128 (minimum power consumption without standby) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 23 Celsius | |
Power Cycle Min/Max Temperature: 20/24 Celsius | |
Lifetime Min/Max Temperature: 20/46 Celsius | |
Lifetime Average Temperature: 38 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (86) | |
Error SMART WRITE LOG does not return COUNT and LBA_LOW register | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
87 2014-03-26 16:27 41 ********************** | |
88 2014-03-26 16:28 40 ********************* | |
89 2014-03-26 16:29 40 ********************* | |
90 2014-03-26 16:30 39 ******************** | |
91 2014-03-26 16:31 39 ******************** | |
92 2014-03-26 16:32 40 ********************* | |
93 2014-03-26 16:33 41 ********************** | |
94 2014-03-26 16:34 42 *********************** | |
95 2014-03-26 16:35 42 *********************** | |
96 2014-03-26 16:36 41 ********************** | |
97 2014-03-26 16:37 42 *********************** | |
98 2014-03-26 16:38 41 ********************** | |
99 2014-03-26 16:39 40 ********************* | |
100 2014-03-26 16:40 40 ********************* | |
101 2014-03-26 16:41 41 ********************** | |
102 2014-03-26 16:42 41 ********************** | |
103 2014-03-26 16:43 42 *********************** | |
104 2014-03-26 16:44 43 ************************ | |
105 2014-03-26 16:45 43 ************************ | |
106 2014-03-26 16:46 42 *********************** | |
... ..( 5 skipped). .. *********************** | |
112 2014-03-26 16:52 42 *********************** | |
113 2014-03-26 16:53 41 ********************** | |
... ..( 6 skipped). .. ********************** | |
120 2014-03-26 17:00 41 ********************** | |
121 2014-03-26 17:01 42 *********************** | |
122 2014-03-26 17:02 41 ********************** | |
... ..( 7 skipped). .. ********************** | |
2 2014-03-26 17:10 41 ********************** | |
3 2014-03-26 17:11 40 ********************* | |
4 2014-03-26 17:12 40 ********************* | |
5 2014-03-26 17:13 41 ********************** | |
6 2014-03-26 17:14 40 ********************* | |
... ..( 2 skipped). .. ********************* | |
9 2014-03-26 17:17 40 ********************* | |
10 2014-03-26 17:18 41 ********************** | |
... ..( 2 skipped). .. ********************** | |
13 2014-03-26 17:21 41 ********************** | |
14 2014-03-26 17:22 42 *********************** | |
15 2014-03-26 17:23 41 ********************** | |
16 2014-03-26 17:24 41 ********************** | |
17 2014-03-26 17:25 42 *********************** | |
18 2014-03-26 17:26 41 ********************** | |
19 2014-03-26 17:27 42 *********************** | |
20 2014-03-26 17:28 41 ********************** | |
21 2014-03-26 17:29 42 *********************** | |
22 2014-03-26 17:30 41 ********************** | |
23 2014-03-26 17:31 42 *********************** | |
24 2014-03-26 17:32 41 ********************** | |
25 2014-03-26 17:33 42 *********************** | |
... ..( 2 skipped). .. *********************** | |
28 2014-03-26 17:36 42 *********************** | |
29 2014-03-26 17:37 41 ********************** | |
30 2014-03-26 17:38 42 *********************** | |
... ..( 2 skipped). .. *********************** | |
33 2014-03-26 17:41 42 *********************** | |
34 2014-03-26 17:42 39 ******************** | |
35 2014-03-26 17:43 35 **************** | |
36 2014-03-26 17:44 33 ************** | |
37 2014-03-26 17:45 32 ************* | |
38 2014-03-26 17:46 31 ************ | |
... ..( 4 skipped). .. ************ | |
43 2014-03-26 17:51 31 ************ | |
44 2014-03-26 17:52 32 ************* | |
45 2014-03-26 17:53 32 ************* | |
46 2014-03-26 17:54 32 ************* | |
47 2014-03-26 17:55 31 ************ | |
48 2014-03-26 17:56 32 ************* | |
49 2014-03-26 17:57 31 ************ | |
50 2014-03-26 17:58 ? - | |
51 2014-03-26 17:59 24 ***** | |
52 2014-03-26 18:00 25 ****** | |
53 2014-03-26 18:01 26 ******* | |
54 2014-03-26 18:02 27 ******** | |
55 2014-03-26 18:03 ? - | |
56 2014-03-26 18:04 28 ********* | |
57 2014-03-26 18:05 28 ********* | |
58 2014-03-26 18:06 29 ********** | |
59 2014-03-26 18:07 30 *********** | |
... ..( 2 skipped). .. *********** | |
62 2014-03-26 18:10 30 *********** | |
63 2014-03-26 18:11 31 ************ | |
64 2014-03-26 18:12 31 ************ | |
65 2014-03-26 18:13 32 ************* | |
... ..( 4 skipped). .. ************* | |
70 2014-03-26 18:18 32 ************* | |
71 2014-03-26 18:19 ? - | |
72 2014-03-26 18:20 32 ************* | |
73 2014-03-26 18:21 32 ************* | |
74 2014-03-26 18:22 32 ************* | |
75 2014-03-26 18:23 ? - | |
76 2014-03-26 18:24 32 ************* | |
77 2014-03-26 18:25 31 ************ | |
78 2014-03-26 18:26 31 ************ | |
79 2014-03-26 18:27 ? - | |
80 2014-03-26 18:28 20 * | |
81 2014-03-26 18:29 21 ** | |
82 2014-03-26 18:30 22 *** | |
83 2014-03-26 18:31 23 **** | |
... ..( 2 skipped). .. **** | |
86 2014-03-26 18:34 23 **** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 19 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 18 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 17 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 15 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 19 | |
194 Temperature_Celsius -O---- 253 253 000 - 23 (Min/Max 20/46) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 63) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "19" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "17" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "15" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "18" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "19" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "23" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 1 , | |
"boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"device_name": "sdj" , | |
"device_node": "/dev/sdj" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "160,041,885,696 bytes [160 GB]" , | |
"model": "INTEL SSDSA2CW160G3" , | |
"model_family": "Intel 320 Series SSDs" , | |
"phy_protocol": "SATA" , | |
"serial_no": "PEPR3140001H160DGN" | |
} , | |
"host_information": { | |
"boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"device_name": "sdj" , | |
"device_node": "/dev/sdj" , | |
"host_ip": "10.0.5.45" , | |
"last_boot_id": "7dfe501b-170c-4dd4-885d-437ec61bc223" , | |
"last_host_ip": "10.0.5.45" , | |
"last_known_as": "/dev/sdj" , | |
"last_machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" | |
} , | |
"host_ip": "10.0.5.45" , | |
"id": "08051dfc-a760-4313-a423-e81a348ab89e" , | |
"lifetime": 3560400 , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"model": "INTEL SSDSA2CW160G3" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "PEPR3140001H160DGN" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Model Family: Intel 320 Series SSDs | |
Device Model: INTEL SSDSA2CW160G3 | |
Serial Number: PEPR3140001H160DGN | |
LU WWN Device Id: 5 001517 387e63086 | |
Firmware Version: 4PC10362 | |
User Capacity: 160,041,885,696 bytes [160 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: In smartctl database [for details use: -P show] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 4 | |
Local Time is: Thu Mar 27 21:30:15 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM feature is: Unavailable | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
GP/S Log at address 0x01 has 1 sectors [Summary SMART error log] | |
GP/S Log at address 0x02 has 8 sectors [Comprehensive SMART error log] | |
GP/S Log at address 0x03 has 8 sectors [Ext. Comprehensive SMART error log] | |
GP/S Log at address 0x04 has 8 sectors [Device Statistics log] | |
GP/S Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP/S Log at address 0x07 has 1 sectors [Extended self-test log] | |
GP/S Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP/S Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP/S Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 4 0 Command failed due to ICRC error | |
0x0004 4 0 R_ERR response for host-to-device data FIS | |
0x0007 4 0 R_ERR response for host-to-device non-data FIS | |
0x0008 4 0 Device-to-host non-data FIS retries | |
0x0009 4 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 4 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 4 0 CRC errors within host-to-device FIS | |
0x000d 4 0 Non-CRC errors within host-to-device FIS | |
0x000f 4 0 R_ERR response for host-to-device data FIS, CRC | |
0x0010 4 0 R_ERR response for host-to-device data FIS, non-CRC | |
0x0012 4 0 R_ERR response for host-to-device non-data FIS, CRC | |
0x0013 4 0 R_ERR response for host-to-device non-data FIS, non-CRC | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (8 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
Invalid Self-test Log index = 0x0043 (reserved = 0x00) | |
Note: selective self-test log revision number (0) not 1 implies that no selective self-test has ever been run | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 0 | |
Note: revision number not 1 implies that no selective self-test has ever been run | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "Error Read SCT Data Table failed: scsi error aborted command | |
Error Write SCT (Get) Error Recovery Control Command failed: scsi error unsupported field in scsi command | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
3 Spin_Up_Time -----K 100 100 000 - 0 | |
4 Start_Stop_Count ----CK 100 100 000 - 0 | |
5 Reallocated_Sector_Ct -O--CK 100 100 000 - 1 | |
9 Power_On_Hours -O--CK 100 100 000 - 989 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 23 | |
170 Reserve_Block_Count PO--CK 100 100 010 - 0 | |
171 Program_Fail_Count -O--CK 100 100 000 - 0 | |
172 Erase_Fail_Count -O--CK 100 100 000 - 0 | |
183 Runtime_Bad_Block ----CK 100 100 000 - 0 | |
184 End-to-End_Error -O--CK 100 100 090 - 0 | |
187 Reported_Uncorrect -O--CK 100 100 000 - 5 | |
192 Unsafe_Shutdown_Count -O--CK 100 100 000 - 23 | |
199 UDMA_CRC_Error_Count ----CK 100 100 000 - 0 | |
225 Host_Writes_32MiB -O--CK 100 100 000 - 439138 | |
226 Workld_Media_Wear_Indic -O--CK 100 100 000 - 5373172 | |
227 Workld_Host_Reads_Perc -O--CK 100 100 000 - 0 | |
228 Workload_Minutes -O--CK 100 100 000 - 2762020877 | |
232 Available_Reservd_Space PO--CK 100 100 010 - 0 | |
233 Media_Wearout_Indicator -O--CK 099 099 000 - 0 | |
241 Host_Writes_32MiB -O--CK 100 100 000 - 439138 | |
242 Host_Reads_32MiB -O--CK 100 100 000 - 400635 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 1) seconds. | |
Offline data collection | |
capabilities: (0x75) SMART execute Offline immediate. | |
No Auto Offline data collection support. | |
Abort Offline collection upon new | |
command. | |
No Offline surface scan supported. | |
Self-test supported. | |
Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 1) minutes. | |
Extended self-test routine | |
recommended polling time: ( 1) minutes. | |
Conveyance self-test routine | |
recommended polling time: ( 1) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 5 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Available_Reservd_Space": { | |
"attr_name": "Available_Reservd_Space" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "232" , | |
"threshold": "010" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"End_to_End_Error": { | |
"attr_name": "End-to-End_Error" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "184" , | |
"threshold": "090" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Erase_Fail_Count": { | |
"attr_name": "Erase_Fail_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "172" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Host_Reads_32MiB": { | |
"attr_name": "Host_Reads_32MiB" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "400635" , | |
"smart_id": "242" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Host_Writes_32MiB": { | |
"attr_name": "Host_Writes_32MiB" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "439138" , | |
"smart_id": "241" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Media_Wearout_Indicator": { | |
"attr_name": "Media_Wearout_Indicator" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "233" , | |
"threshold": "000" , | |
"value": "099" , | |
"worst": "099" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "23" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "989" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Program_Fail_Count": { | |
"attr_name": "Program_Fail_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "171" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "1" , | |
"smart_id": "5" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reported_Uncorrect": { | |
"attr_name": "Reported_Uncorrect" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "5" , | |
"smart_id": "187" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reserve_Block_Count": { | |
"attr_name": "Reserve_Block_Count" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "170" , | |
"threshold": "010" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Runtime_Bad_Block": { | |
"attr_name": "Runtime_Bad_Block" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "0" , | |
"smart_id": "183" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "-----K" , | |
"raw_value": "0" , | |
"smart_id": "3" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "0" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "----CK" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Unsafe_Shutdown_Count": { | |
"attr_name": "Unsafe_Shutdown_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "23" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Workld_Host_Reads_Perc": { | |
"attr_name": "Workld_Host_Reads_Perc" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "227" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Workld_Media_Wear_Indic": { | |
"attr_name": "Workld_Media_Wear_Indic" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "5373172" , | |
"smart_id": "226" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Workload_Minutes": { | |
"attr_name": "Workload_Minutes" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "2762020877" , | |
"smart_id": "228" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"device_name": "sdd" , | |
"device_node": "/dev/sdd" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E18G4263CNP56D" | |
} , | |
"host_information": { | |
"boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"device_name": "sdd" , | |
"device_node": "/dev/sdd" , | |
"host_ip": "10.0.5.45" , | |
"last_boot_id": "0f13153f-ab71-44a5-ba11-c798db3e26b6" , | |
"last_host_ip": "10.0.5.45" , | |
"last_known_as": "/dev/sdd" , | |
"last_machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" | |
} , | |
"host_ip": "10.0.5.45" , | |
"id": "0fdadd85-9a38-4f4a-a76c-19ba1fee00ba" , | |
"lifetime": 68400 , | |
"machine_id": "9d62ea424e42e161d1ed756f49fb7e5d" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E18G4263CNP56D" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E18G4263CNP56D | |
LU WWN Device Id: 5 000cca 6d4c966e2 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 21:07:01 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 1 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 1 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 20/24 Celsius | |
Lifetime Min/Max Temperature: 20/49 Celsius | |
Lifetime Average Temperature: 41 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (124) | |
Error SMART WRITE LOG does not return COUNT and LBA_LOW register | |
Warning: device does not support SCT (Get) Error Recovery Control command | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
125 2014-03-26 19:00 46 *************************** | |
... ..( 5 skipped). .. *************************** | |
3 2014-03-26 19:06 46 *************************** | |
4 2014-03-26 19:07 45 ************************** | |
5 2014-03-26 19:08 46 *************************** | |
6 2014-03-26 19:09 45 ************************** | |
7 2014-03-26 19:10 45 ************************** | |
8 2014-03-26 19:11 46 *************************** | |
9 2014-03-26 19:12 46 *************************** | |
10 2014-03-26 19:13 46 *************************** | |
11 2014-03-26 19:14 45 ************************** | |
... ..( 4 skipped). .. ************************** | |
16 2014-03-26 19:19 45 ************************** | |
17 2014-03-26 19:20 46 *************************** | |
18 2014-03-26 19:21 45 ************************** | |
19 2014-03-26 19:22 46 *************************** | |
20 2014-03-26 19:23 46 *************************** | |
21 2014-03-26 19:24 45 ************************** | |
22 2014-03-26 19:25 46 *************************** | |
23 2014-03-26 19:26 46 *************************** | |
24 2014-03-26 19:27 45 ************************** | |
25 2014-03-26 19:28 46 *************************** | |
26 2014-03-26 19:29 45 ************************** | |
27 2014-03-26 19:30 46 *************************** | |
28 2014-03-26 19:31 45 ************************** | |
29 2014-03-26 19:32 46 *************************** | |
... ..( 11 skipped). .. *************************** | |
41 2014-03-26 19:44 46 *************************** | |
42 2014-03-26 19:45 45 ************************** | |
43 2014-03-26 19:46 41 ********************** | |
44 2014-03-26 19:47 37 ****************** | |
45 2014-03-26 19:48 36 ***************** | |
46 2014-03-26 19:49 34 *************** | |
... ..( 10 skipped). .. *************** | |
57 2014-03-26 20:00 34 *************** | |
58 2014-03-26 20:01 ? - | |
59 2014-03-26 20:02 25 ****** | |
60 2014-03-26 20:03 26 ******* | |
61 2014-03-26 20:04 27 ******** | |
62 2014-03-26 20:05 28 ********* | |
63 2014-03-26 20:06 ? - | |
64 2014-03-26 20:07 29 ********** | |
65 2014-03-26 20:08 29 ********** | |
66 2014-03-26 20:09 30 *********** | |
67 2014-03-26 20:10 30 *********** | |
68 2014-03-26 20:11 31 ************ | |
69 2014-03-26 20:12 31 ************ | |
70 2014-03-26 20:13 32 ************* | |
71 2014-03-26 20:14 32 ************* | |
72 2014-03-26 20:15 32 ************* | |
73 2014-03-26 20:16 33 ************** | |
... ..( 5 skipped). .. ************** | |
79 2014-03-26 20:22 33 ************** | |
80 2014-03-26 20:23 34 *************** | |
81 2014-03-26 20:24 34 *************** | |
82 2014-03-26 20:25 33 ************** | |
83 2014-03-26 20:26 34 *************** | |
84 2014-03-26 20:27 34 *************** | |
85 2014-03-26 20:28 34 *************** | |
86 2014-03-26 20:29 33 ************** | |
87 2014-03-26 20:30 34 *************** | |
... ..( 8 skipped). .. *************** | |
96 2014-03-26 20:39 34 *************** | |
97 2014-03-26 20:40 33 ************** | |
98 2014-03-26 20:41 33 ************** | |
99 2014-03-26 20:42 ? - | |
100 2014-03-26 20:43 33 ************** | |
101 2014-03-26 20:44 32 ************* | |
102 2014-03-26 20:45 33 ************** | |
103 2014-03-26 20:46 ? - | |
104 2014-03-26 20:47 32 ************* | |
105 2014-03-26 20:48 32 ************* | |
106 2014-03-26 20:49 33 ************** | |
107 2014-03-26 20:50 32 ************* | |
108 2014-03-26 20:51 32 ************* | |
109 2014-03-26 20:52 32 ************* | |
110 2014-03-26 20:53 31 ************ | |
111 2014-03-26 20:54 31 ************ | |
112 2014-03-26 20:55 31 ************ | |
113 2014-03-26 20:56 ? - | |
114 2014-03-26 20:57 22 *** | |
115 2014-03-26 20:58 22 *** | |
116 2014-03-26 20:59 23 **** | |
117 2014-03-26 21:00 23 **** | |
118 2014-03-26 21:01 24 ***** | |
119 2014-03-26 21:02 23 **** | |
120 2014-03-26 21:03 24 ***** | |
... ..( 3 skipped). .. ***** | |
124 2014-03-26 21:07 24 ***** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 17 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 19 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 15 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 12 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 17 | |
194 Temperature_Celsius -O---- 250 250 000 - 24 (Min/Max 20/49) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 62) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "17" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "15" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "12" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "19" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "17" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "24" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "250" , | |
"worst": "250" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "df937189-bff5-4059-be2a-8b197418890b" , | |
"device_name": "sdk" , | |
"device_node": "/dev/sdk" , | |
"disk_failing": false , | |
"disk_information": { | |
"bad_sectors": "0" , | |
"capacity": "4,000,787,030,016 bytes [4.00 TB]" , | |
"model": "WD4001FYYG-01SL3" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SAS" , | |
"serial_no": "WMC1F0799115" , | |
"vendor": "WD" | |
} , | |
"host_information": { | |
"boot_id": "df937189-bff5-4059-be2a-8b197418890b" , | |
"device_name": "sdk" , | |
"device_node": "/dev/sdk" , | |
"host_ip": "10.0.5.6" , | |
"last_boot_id": "df937189-bff5-4059-be2a-8b197418890b" , | |
"last_host_ip": "10.0.5.6" , | |
"last_known_as": "/dev/sdk" , | |
"last_machine_id": "765569f3fcb08c59070c600749f44739" , | |
"machine_id": "765569f3fcb08c59070c600749f44739" | |
} , | |
"host_ip": "10.0.5.6" , | |
"id": "11ebe038-ff84-4fa9-b2e9-43a4acea0d4b" , | |
"lifetime": 0 , | |
"machine_id": "765569f3fcb08c59070c600749f44739" , | |
"model": "WD4001FYYG-01SL3" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "unavailable" , | |
"serial_no": "WMC1F0799115" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
SMART Self-test log | |
Num Test Status segment LifeTime LBA_first_err [SK ASC ASQ] | |
Description number (hours) | |
# 1 Background short Aborted (by user command) - 78 - [- - -] | |
Long (extended) Self Test duration: 31120 seconds [518.7 minutes] | |
" , | |
"general_info": "Vendor: WD | |
Product: WD4001FYYG-01SL3 | |
Revision: VR02 | |
User Capacity: 4,000,787,030,016 bytes [4.00 TB] | |
Logical block size: 512 bytes | |
Logical Unit id: 0x50000c0f01c42014 | |
Serial number: WMC1F0799115 | |
Device type: disk | |
Transport protocol: SAS | |
Local Time is: Thu Mar 27 16:09:24 2014 UTC | |
Device supports SMART and is Disabled | |
Temperature Warning Enabled | |
" , | |
"sas_bsr": "Background scan results log | |
Status: scan is active | |
Accumulated power on time, hours:minutes 1805:01 [108301 minutes] | |
Number of background scans performed: 11, scan progress: 87.97% | |
Number of background medium scans performed: 11 | |
" , | |
"sas_ecm": "Error counter log: | |
Errors Corrected by Total Correction Gigabytes Total | |
ECC rereads/ errors algorithm processed uncorrected | |
fast | delayed rewrites corrected invocations [10^9 bytes] errors | |
read: 3370 3 3 3373 3 129.466 0 | |
write: 1940808 3 3 1940811 3 4200.343 0 | |
verify: 0 1 1 1 1 0.000 0 | |
" , | |
"sas_ecm_data": "Non-medium error count: 91 | |
" , | |
"smart_data": "SMART Health Status: OK | |
Current Drive Temperature: 40 C | |
Drive Trip Temperature: 69 C | |
Manufactured in week 01 of year 2012 | |
Specified cycle count over device lifetime: 1048576 | |
Accumulated start-stop cycles: 38 | |
Specified load-unload count over device lifetime: 1114112 | |
Accumulated load-unload cycles: 3 | |
Elements in grown defect list: 0 | |
" | |
} , | |
"smart_status": { | |
"bad_sectors": "0" , | |
"grown_defects": "0" , | |
"health_status": "PASSED" , | |
"non_medium_errors": "91" , | |
"score": 91 , | |
"smart_attributes": { | |
"error": true , | |
"error_text": "Unable to capture SMART attributes of this device" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "f371b291-08cb-471d-98a8-b82a5d8edae3" , | |
"device_name": "sdd" , | |
"device_node": "/dev/sdd" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E3824562C9ALTM" | |
} , | |
"host_information": { | |
"boot_id": "f371b291-08cb-471d-98a8-b82a5d8edae3" , | |
"device_name": "sdd" , | |
"device_node": "/dev/sdd" , | |
"host_ip": "10.0.5.52" , | |
"last_boot_id": "f371b291-08cb-471d-98a8-b82a5d8edae3" , | |
"last_host_ip": "10.0.5.52" , | |
"last_known_as": "/dev/sdd" , | |
"last_machine_id": "e6ef0a82acee8841da89d6b14a231869" , | |
"machine_id": "e6ef0a82acee8841da89d6b14a231869" | |
} , | |
"host_ip": "10.0.5.52" , | |
"id": "16729949-ad7b-4f5f-b211-71819625780d" , | |
"lifetime": 75600 , | |
"machine_id": "e6ef0a82acee8841da89d6b14a231869" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E3824562C9ALTM" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E3824562C9ALTM | |
LU WWN Device Id: 5 000cca 6d3c43f27 | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 20:30:42 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 5 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 4 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 24 Celsius | |
Power Cycle Min/Max Temperature: 21/24 Celsius | |
Lifetime Min/Max Temperature: 21/58 Celsius | |
Lifetime Average Temperature: 45 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (1) | |
SCT Error Recovery Control: | |
Read: 255 (25.5 seconds) | |
Write: 255 (25.5 seconds) | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
2 2014-03-26 18:23 54 *********************************** | |
3 2014-03-26 18:24 54 *********************************** | |
4 2014-03-26 18:25 53 ********************************** | |
... ..( 2 skipped). .. ********************************** | |
7 2014-03-26 18:28 53 ********************************** | |
8 2014-03-26 18:29 54 *********************************** | |
9 2014-03-26 18:30 54 *********************************** | |
10 2014-03-26 18:31 53 ********************************** | |
11 2014-03-26 18:32 53 ********************************** | |
12 2014-03-26 18:33 52 ********************************* | |
13 2014-03-26 18:34 53 ********************************** | |
14 2014-03-26 18:35 53 ********************************** | |
15 2014-03-26 18:36 54 *********************************** | |
16 2014-03-26 18:37 54 *********************************** | |
17 2014-03-26 18:38 54 *********************************** | |
18 2014-03-26 18:39 53 ********************************** | |
... ..( 2 skipped). .. ********************************** | |
21 2014-03-26 18:42 53 ********************************** | |
22 2014-03-26 18:43 54 *********************************** | |
... ..( 2 skipped). .. *********************************** | |
25 2014-03-26 18:46 54 *********************************** | |
26 2014-03-26 18:47 53 ********************************** | |
... ..( 5 skipped). .. ********************************** | |
32 2014-03-26 18:53 53 ********************************** | |
33 2014-03-26 18:54 52 ********************************* | |
34 2014-03-26 18:55 53 ********************************** | |
35 2014-03-26 18:56 52 ********************************* | |
36 2014-03-26 18:57 50 ******************************* | |
37 2014-03-26 18:58 44 ************************* | |
38 2014-03-26 18:59 40 ********************* | |
39 2014-03-26 19:00 38 ******************* | |
40 2014-03-26 19:01 37 ****************** | |
41 2014-03-26 19:02 37 ****************** | |
42 2014-03-26 19:03 36 ***************** | |
... ..( 3 skipped). .. ***************** | |
46 2014-03-26 19:07 36 ***************** | |
47 2014-03-26 19:08 35 **************** | |
... ..( 4 skipped). .. **************** | |
52 2014-03-26 19:13 35 **************** | |
53 2014-03-26 19:14 ? - | |
54 2014-03-26 19:15 24 ***** | |
55 2014-03-26 19:16 25 ****** | |
56 2014-03-26 19:17 25 ****** | |
57 2014-03-26 19:18 26 ******* | |
58 2014-03-26 19:19 27 ******** | |
59 2014-03-26 19:20 27 ******** | |
60 2014-03-26 19:21 27 ******** | |
61 2014-03-26 19:22 28 ********* | |
62 2014-03-26 19:23 28 ********* | |
63 2014-03-26 19:24 28 ********* | |
64 2014-03-26 19:25 ? - | |
65 2014-03-26 19:26 28 ********* | |
66 2014-03-26 19:27 29 ********** | |
67 2014-03-26 19:28 29 ********** | |
68 2014-03-26 19:29 29 ********** | |
69 2014-03-26 19:30 30 *********** | |
70 2014-03-26 19:31 30 *********** | |
71 2014-03-26 19:32 30 *********** | |
72 2014-03-26 19:33 31 ************ | |
... ..( 4 skipped). .. ************ | |
77 2014-03-26 19:38 31 ************ | |
78 2014-03-26 19:39 32 ************* | |
... ..( 17 skipped). .. ************* | |
96 2014-03-26 19:57 32 ************* | |
97 2014-03-26 19:58 31 ************ | |
98 2014-03-26 19:59 ? - | |
99 2014-03-26 20:00 31 ************ | |
100 2014-03-26 20:01 31 ************ | |
101 2014-03-26 20:02 32 ************* | |
102 2014-03-26 20:03 31 ************ | |
103 2014-03-26 20:04 ? - | |
104 2014-03-26 20:05 31 ************ | |
... ..( 2 skipped). .. ************ | |
107 2014-03-26 20:08 31 ************ | |
108 2014-03-26 20:09 32 ************* | |
109 2014-03-26 20:10 32 ************* | |
110 2014-03-26 20:11 32 ************* | |
111 2014-03-26 20:12 ? - | |
112 2014-03-26 20:13 21 ** | |
113 2014-03-26 20:14 22 *** | |
114 2014-03-26 20:15 22 *** | |
115 2014-03-26 20:16 23 **** | |
... ..( 3 skipped). .. **** | |
119 2014-03-26 20:20 23 **** | |
120 2014-03-26 20:21 24 ***** | |
121 2014-03-26 20:22 24 ***** | |
122 2014-03-26 20:23 23 **** | |
123 2014-03-26 20:24 24 ***** | |
... ..( 5 skipped). .. ***** | |
1 2014-03-26 20:30 24 ***** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 25 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 21 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 21 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 17 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 26 | |
194 Temperature_Celsius -O---- 250 250 000 - 24 (Min/Max 21/58) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 58) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "26" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "21" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "17" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "21" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "25" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "24" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "250" , | |
"worst": "250" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} , | |
{ | |
"attr_failed_past": 0 , | |
"attr_failing": 0 , | |
"bad_sectors": 0 , | |
"boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"device_name": "sdm" , | |
"device_node": "/dev/sdm" , | |
"disk_failing": false , | |
"disk_information": { | |
"ata_security": "Disabled, NOT FROZEN [SEC1]" , | |
"capacity": "250,059,350,016 bytes [250 GB]" , | |
"model": "Hitachi HTE723225A7A364" , | |
"model_family": "Unknown Model Family" , | |
"phy_protocol": "SATA" , | |
"serial_no": "E382456202UTWN" | |
} , | |
"host_information": { | |
"boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"device_name": "sdm" , | |
"device_node": "/dev/sdm" , | |
"host_ip": "10.0.5.50" , | |
"last_boot_id": "911cecfb-f552-4ddd-803e-c325fd200db5" , | |
"last_host_ip": "10.0.5.50" , | |
"last_known_as": "/dev/sdm" , | |
"last_machine_id": "300a76492cf73e527d61b3e849efde1b" , | |
"machine_id": "300a76492cf73e527d61b3e849efde1b" | |
} , | |
"host_ip": "10.0.5.50" , | |
"id": "183e49d2-e052-4ad2-b7cc-56efd0b42d22" , | |
"lifetime": 64800 , | |
"machine_id": "300a76492cf73e527d61b3e849efde1b" , | |
"model": "Hitachi HTE723225A7A364" , | |
"self_test_percent_left": 0 , | |
"self_test_status": "success" , | |
"serial_no": "E382456202UTWN" , | |
"smart_blocks": { | |
"block_seek": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build) | |
Copyright (C) 2002-12 by Bruce Allen, http://smartmontools.sourceforge.net | |
" , | |
"general_info": "=== START OF INFORMATION SECTION === | |
Device Model: Hitachi HTE723225A7A364 | |
Serial Number: E382456202UTWN | |
LU WWN Device Id: 5 000cca 6dbc1499a | |
Firmware Version: ECBOA70B | |
User Capacity: 250,059,350,016 bytes [250 GB] | |
Sector Size: 512 bytes logical/physical | |
Device is: Not in smartctl database [for details use: -P showall] | |
ATA Version is: 8 | |
ATA Standard is: ATA-8-ACS revision 6 | |
Local Time is: Wed Mar 26 22:46:35 2014 UTC | |
SMART support is: Available - device has SMART capability. | |
SMART support is: Enabled | |
AAM feature is: Unavailable | |
APM level is: 254 (maximum performance) | |
Rd look-ahead is: Enabled | |
Write cache is: Enabled | |
ATA Security is: Disabled, NOT FROZEN [SEC1] | |
" , | |
"sata_gp_logdir": "General Purpose Log Directory Version 1 | |
SMART Log Directory Version 1 [multi-sector log support] | |
GP/S Log at address 0x00 has 1 sectors [Log Directory] | |
SMART Log at address 0x01 has 1 sectors [Summary SMART error log] | |
SMART Log at address 0x02 has 1 sectors [Comprehensive SMART error log] | |
GP Log at address 0x03 has 1 sectors [Ext. Comprehensive SMART error log] | |
GP Log at address 0x04 has 7 sectors [Device Statistics log] | |
SMART Log at address 0x06 has 1 sectors [SMART self-test log] | |
GP Log at address 0x07 has 1 sectors [Extended self-test log] | |
SMART Log at address 0x09 has 1 sectors [Selective self-test log] | |
GP Log at address 0x10 has 1 sectors [NCQ Command Error log] | |
GP Log at address 0x11 has 1 sectors [SATA Phy Event Counters] | |
GP/S Log at address 0x80 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x81 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x82 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x83 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x84 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x85 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x86 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x87 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x88 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x89 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x8f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x90 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x91 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x92 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x93 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x94 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x95 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x96 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x97 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x98 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x99 has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9a has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9b has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9c has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9d has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9e has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0x9f has 16 sectors [Host vendor specific log] | |
GP/S Log at address 0xe0 has 1 sectors [SCT Command/Status] | |
GP/S Log at address 0xe1 has 1 sectors [SCT Data Transfer] | |
" , | |
"sata_pec": "SATA Phy Event Counters (GP Log 0x11) | |
ID Size Value Description | |
0x0001 2 0 Command failed due to ICRC error | |
0x0002 2 0 R_ERR response for data FIS | |
0x0003 2 0 R_ERR response for device-to-host data FIS | |
0x0004 2 0 R_ERR response for host-to-device data FIS | |
0x0005 2 0 R_ERR response for non-data FIS | |
0x0006 2 0 R_ERR response for device-to-host non-data FIS | |
0x0007 2 0 R_ERR response for host-to-device non-data FIS | |
0x0009 2 3 Transition from drive PhyRdy to drive PhyNRdy | |
0x000a 2 2 Device-to-host register FISes sent due to a COMRESET | |
0x000b 2 0 CRC errors within host-to-device FIS | |
0x000d 2 0 Non-CRC errors within host-to-device FIS | |
" , | |
"sata_sct": "SCT Status Version: 3 | |
SCT Version (vendor specific): 256 (0x0100) | |
SCT Support Level: 1 | |
Device State: Active (0) | |
Current Temperature: 25 Celsius | |
Power Cycle Min/Max Temperature: 22/25 Celsius | |
Lifetime Min/Max Temperature: 22/66 Celsius | |
Lifetime Average Temperature: 48 Celsius | |
Under/Over Temperature Limit Count: 0/0 | |
SCT Temperature History Version: 2 | |
Temperature Sampling Period: 1 minute | |
Temperature Logging Interval: 1 minute | |
Min/Max recommended Temperature: 0/60 Celsius | |
Min/Max Temperature Limit: -40/65 Celsius | |
Temperature History Size (Index): 128 (108) | |
SCT Error Recovery Control: | |
Read: Disabled | |
Write: Disabled | |
" , | |
"sata_sct_history": "Index Estimated Time Temperature Celsius | |
109 2014-03-26 20:39 57 ************************************** | |
110 2014-03-26 20:40 56 ************************************* | |
111 2014-03-26 20:41 55 ************************************ | |
112 2014-03-26 20:42 54 *********************************** | |
113 2014-03-26 20:43 54 *********************************** | |
114 2014-03-26 20:44 54 *********************************** | |
115 2014-03-26 20:45 53 ********************************** | |
116 2014-03-26 20:46 53 ********************************** | |
117 2014-03-26 20:47 53 ********************************** | |
118 2014-03-26 20:48 52 ********************************* | |
... ..( 2 skipped). .. ********************************* | |
121 2014-03-26 20:51 52 ********************************* | |
122 2014-03-26 20:52 51 ******************************** | |
... ..( 5 skipped). .. ******************************** | |
0 2014-03-26 20:58 51 ******************************** | |
1 2014-03-26 20:59 50 ******************************* | |
2 2014-03-26 21:00 51 ******************************** | |
3 2014-03-26 21:01 51 ******************************** | |
4 2014-03-26 21:02 50 ******************************* | |
... ..( 8 skipped). .. ******************************* | |
13 2014-03-26 21:11 50 ******************************* | |
14 2014-03-26 21:12 51 ******************************** | |
... ..( 2 skipped). .. ******************************** | |
17 2014-03-26 21:15 51 ******************************** | |
18 2014-03-26 21:16 52 ********************************* | |
... ..( 7 skipped). .. ********************************* | |
26 2014-03-26 21:24 52 ********************************* | |
27 2014-03-26 21:25 48 ***************************** | |
28 2014-03-26 21:26 41 ********************** | |
29 2014-03-26 21:27 38 ******************* | |
30 2014-03-26 21:28 36 ***************** | |
31 2014-03-26 21:29 35 **************** | |
32 2014-03-26 21:30 34 *************** | |
33 2014-03-26 21:31 ? - | |
34 2014-03-26 21:32 24 ***** | |
35 2014-03-26 21:33 25 ****** | |
36 2014-03-26 21:34 25 ****** | |
37 2014-03-26 21:35 26 ******* | |
38 2014-03-26 21:36 27 ******** | |
... ..( 3 skipped). .. ******** | |
42 2014-03-26 21:40 27 ******** | |
43 2014-03-26 21:41 ? - | |
44 2014-03-26 21:42 28 ********* | |
45 2014-03-26 21:43 28 ********* | |
46 2014-03-26 21:44 28 ********* | |
47 2014-03-26 21:45 29 ********** | |
48 2014-03-26 21:46 29 ********** | |
49 2014-03-26 21:47 30 *********** | |
... ..( 5 skipped). .. *********** | |
55 2014-03-26 21:53 30 *********** | |
56 2014-03-26 21:54 31 ************ | |
... ..( 3 skipped). .. ************ | |
60 2014-03-26 21:58 31 ************ | |
61 2014-03-26 21:59 32 ************* | |
62 2014-03-26 22:00 31 ************ | |
63 2014-03-26 22:01 31 ************ | |
64 2014-03-26 22:02 32 ************* | |
65 2014-03-26 22:03 32 ************* | |
66 2014-03-26 22:04 32 ************* | |
67 2014-03-26 22:05 31 ************ | |
68 2014-03-26 22:06 32 ************* | |
69 2014-03-26 22:07 31 ************ | |
70 2014-03-26 22:08 31 ************ | |
71 2014-03-26 22:09 32 ************* | |
72 2014-03-26 22:10 31 ************ | |
73 2014-03-26 22:11 31 ************ | |
74 2014-03-26 22:12 32 ************* | |
75 2014-03-26 22:13 32 ************* | |
76 2014-03-26 22:14 31 ************ | |
... ..( 2 skipped). .. ************ | |
79 2014-03-26 22:17 31 ************ | |
80 2014-03-26 22:18 32 ************* | |
81 2014-03-26 22:19 32 ************* | |
82 2014-03-26 22:20 31 ************ | |
83 2014-03-26 22:21 31 ************ | |
84 2014-03-26 22:22 ? - | |
85 2014-03-26 22:23 31 ************ | |
... ..( 8 skipped). .. ************ | |
94 2014-03-26 22:32 31 ************ | |
95 2014-03-26 22:33 ? - | |
96 2014-03-26 22:34 31 ************ | |
97 2014-03-26 22:35 30 *********** | |
98 2014-03-26 22:36 30 *********** | |
99 2014-03-26 22:37 31 ************ | |
100 2014-03-26 22:38 31 ************ | |
101 2014-03-26 22:39 31 ************ | |
102 2014-03-26 22:40 ? - | |
103 2014-03-26 22:41 23 **** | |
104 2014-03-26 22:42 24 ***** | |
105 2014-03-26 22:43 24 ***** | |
106 2014-03-26 22:44 25 ****** | |
107 2014-03-26 22:45 25 ****** | |
108 2014-03-26 22:46 25 ****** | |
" , | |
"sata_smart_ecel": "SMART Extended Comprehensive Error Log Version: 1 (1 sectors) | |
No Errors Logged | |
" , | |
"sata_smart_estl": "SMART Extended Self-test Log Version: 1 (1 sectors) | |
No self-tests have been logged. [To run self-tests, use: smartctl -t] | |
" , | |
"sata_smart_sstld": "SMART Selective self-test log data structure revision number 1 | |
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS | |
1 0 0 Not_testing | |
2 0 0 Not_testing | |
3 0 0 Not_testing | |
4 0 0 Not_testing | |
5 0 0 Not_testing | |
Selective self-test flags (0x0): | |
After scanning selected spans, do NOT read-scan remainder of disk. | |
If Selective self-test is pending on power-up, resume after 0 minute delay. | |
" , | |
"sata_smart_sstld_data": "" , | |
"smart_attr_key": " ||||||_ K auto-keep | |
|||||__ C event count | |
||||___ R error rate | |
|||____ S speed/performance | |
||_____ O updated online | |
|______ P prefailure warning | |
" , | |
"smart_attributes": "ID# ATTRIBUTE_NAME FLAGS VALUE WORST THRESH FAIL RAW_VALUE | |
1 Raw_Read_Error_Rate PO-R-- 100 100 062 - 0 | |
2 Throughput_Performance P-S--- 100 100 040 - 0 | |
3 Spin_Up_Time POS--- 253 253 033 - 1 | |
4 Start_Stop_Count -O--C- 100 100 000 - 15 | |
5 Reallocated_Sector_Ct PO--CK 100 100 005 - 0 | |
7 Seek_Error_Rate PO-R-- 100 100 067 - 0 | |
8 Seek_Time_Performance P-S--- 100 100 040 - 0 | |
9 Power_On_Hours -O--C- 100 100 000 - 18 | |
10 Spin_Retry_Count PO--C- 100 100 060 - 0 | |
12 Power_Cycle_Count -O--CK 100 100 000 - 13 | |
191 G-Sense_Error_Rate -O-R-- 100 100 000 - 0 | |
192 Power-Off_Retract_Count -O--CK 100 100 000 - 12 | |
193 Load_Cycle_Count -O--C- 100 100 000 - 15 | |
194 Temperature_Celsius -O---- 240 240 000 - 25 (Min/Max 22/66) | |
196 Reallocated_Event_Count -O--CK 100 100 000 - 0 | |
197 Current_Pending_Sector -O---K 100 100 000 - 0 | |
198 Offline_Uncorrectable ---R-- 100 100 000 - 0 | |
199 UDMA_CRC_Error_Count -O-R-- 200 200 000 - 0 | |
223 Load_Retry_Count -O-R-- 100 100 000 - 0 | |
" , | |
"smart_data": "=== START OF READ SMART DATA SECTION === | |
SMART overall-health self-assessment test result: PASSED | |
General SMART Values: | |
Offline data collection status: (0x00) Offline data collection activity | |
was never started. | |
Auto Offline Data Collection: Disabled. | |
Self-test execution status: ( 0) The previous self-test routine completed | |
without error or no self-test has ever | |
been run. | |
Total time to complete Offline | |
data collection: ( 45) seconds. | |
Offline data collection | |
capabilities: (0x5b) SMART execute Offline immediate. | |
Auto Offline data collection on/off support. | |
Suspend Offline collection upon new | |
command. | |
Offline surface scan supported. | |
Self-test supported. | |
No Conveyance Self-test supported. | |
Selective Self-test supported. | |
SMART capabilities: (0x0003) Saves SMART data before entering | |
power-saving mode. | |
Supports SMART auto save timer. | |
Error logging capability: (0x01) Error logging supported. | |
General Purpose Logging supported. | |
Short self-test routine | |
recommended polling time: ( 2) minutes. | |
Extended self-test routine | |
recommended polling time: ( 64) minutes. | |
SCT capabilities: (0x003d) SCT Status supported. | |
SCT Error Recovery Control supported. | |
SCT Feature Control supported. | |
SCT Data Table supported. | |
SMART Attributes Data Structure revision number: 16 | |
Vendor Specific SMART Attributes with Thresholds: | |
" | |
} , | |
"smart_status": { | |
"health_status": "PASSED" , | |
"score": 0 , | |
"smart_attributes": { | |
"Current_Pending_Sector": { | |
"attr_name": "Current_Pending_Sector" , | |
"fail": "-" , | |
"flag": "-O---K" , | |
"raw_value": "0" , | |
"smart_id": "197" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"G_Sense_Error_Rate": { | |
"attr_name": "G-Sense_Error_Rate" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "191" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Cycle_Count": { | |
"attr_name": "Load_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "15" , | |
"smart_id": "193" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Load_Retry_Count": { | |
"attr_name": "Load_Retry_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "223" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Offline_Uncorrectable": { | |
"attr_name": "Offline_Uncorrectable" , | |
"fail": "-" , | |
"flag": "---R--" , | |
"raw_value": "0" , | |
"smart_id": "198" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Cycle_Count": { | |
"attr_name": "Power_Cycle_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "13" , | |
"smart_id": "12" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_Off_Retract_Count": { | |
"attr_name": "Power-Off_Retract_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "12" , | |
"smart_id": "192" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Power_On_Hours": { | |
"attr_name": "Power_On_Hours" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "18" , | |
"smart_id": "9" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Raw_Read_Error_Rate": { | |
"attr_name": "Raw_Read_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "1" , | |
"threshold": "062" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Event_Count": { | |
"attr_name": "Reallocated_Event_Count" , | |
"fail": "-" , | |
"flag": "-O--CK" , | |
"raw_value": "0" , | |
"smart_id": "196" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Reallocated_Sector_Ct": { | |
"attr_name": "Reallocated_Sector_Ct" , | |
"fail": "-" , | |
"flag": "PO--CK" , | |
"raw_value": "0" , | |
"smart_id": "5" , | |
"threshold": "005" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Error_Rate": { | |
"attr_name": "Seek_Error_Rate" , | |
"fail": "-" , | |
"flag": "PO-R--" , | |
"raw_value": "0" , | |
"smart_id": "7" , | |
"threshold": "067" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Seek_Time_Performance": { | |
"attr_name": "Seek_Time_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "8" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Retry_Count": { | |
"attr_name": "Spin_Retry_Count" , | |
"fail": "-" , | |
"flag": "PO--C-" , | |
"raw_value": "0" , | |
"smart_id": "10" , | |
"threshold": "060" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Spin_Up_Time": { | |
"attr_name": "Spin_Up_Time" , | |
"fail": "-" , | |
"flag": "POS---" , | |
"raw_value": "1" , | |
"smart_id": "3" , | |
"threshold": "033" , | |
"value": "253" , | |
"worst": "253" | |
} , | |
"Start_Stop_Count": { | |
"attr_name": "Start_Stop_Count" , | |
"fail": "-" , | |
"flag": "-O--C-" , | |
"raw_value": "15" , | |
"smart_id": "4" , | |
"threshold": "000" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"Temperature_Celsius": { | |
"attr_name": "Temperature_Celsius" , | |
"fail": "-" , | |
"flag": "-O----" , | |
"raw_value": "25" , | |
"smart_id": "194" , | |
"threshold": "000" , | |
"value": "240" , | |
"worst": "240" | |
} , | |
"Throughput_Performance": { | |
"attr_name": "Throughput_Performance" , | |
"fail": "-" , | |
"flag": "P-S---" , | |
"raw_value": "0" , | |
"smart_id": "2" , | |
"threshold": "040" , | |
"value": "100" , | |
"worst": "100" | |
} , | |
"UDMA_CRC_Error_Count": { | |
"attr_name": "UDMA_CRC_Error_Count" , | |
"fail": "-" , | |
"flag": "-O-R--" , | |
"raw_value": "0" , | |
"smart_id": "199" , | |
"threshold": "000" , | |
"value": "200" , | |
"worst": "200" | |
} , | |
"error": false , | |
"error_text": "Success" | |
} , | |
"smartctl_version": "smartctl 5.43 2012-06-30 r3573 [x86_64-linux-3.8.0-35-generic] (local build)" | |
} | |
} | |
] |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment