tlp-stat -s -b bat

bat.txt

--- TLP 1.5.0 --------------------------------------------

+++ System Info
System         = LENOVO ThinkPad T440p ThinkPad T440p
BIOS           = 4.16-1239-gd5c31acee4-dirty
OS Release     = Artix Linux
Kernel         = 6.0.2-artix1-1.1 #1 SMP PREEMPT_DYNAMIC Sun, 16 Oct 2022 21:55:53 +0000 x86_64
/proc/cmdline  = BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=ff437830-1e43-4145-8fea-7ad6da6febe2 rw loglevel=3 quiet iomem=relaxed
Init system    = openrc
Boot mode      = BIOS (CSM, Legacy)

+++ TLP Status
State          = enabled
RDW state      = not installed
Last run       = 01:45:16 PM,      6 sec(s) ago
Mode           = battery
Power source   = battery

+++ Battery Care
Plugin: thinkpad
Supported features: charge thresholds, recalibration
Driver usage:
* natacpi (thinkpad_acpi) = active (charge thresholds, recalibration)
* tpacpi-bat (acpi_call)  = inactive (superseded by natacpi)
Parameter value ranges:
* START_CHARGE_THRESH_BAT0/1:  0(off)..96(default)..99
* STOP_CHARGE_THRESH_BAT0/1:   1..100(default)

+++ ThinkPad Battery Status: BAT0 (Main / Internal)
/sys/class/power_supply/BAT0/manufacturer                   = SANYO
/sys/class/power_supply/BAT0/model_name                     = 45N1769
/sys/class/power_supply/BAT0/cycle_count                    =      0 (or not supported)
/sys/class/power_supply/BAT0/status                         = Discharging

/sys/class/power_supply/BAT0/charge_control_start_threshold =      0 [%]
/sys/class/power_supply/BAT0/charge_control_end_threshold   =    100 [%]
/sys/class/power_supply/BAT0/charge_behaviour               = [auto]