Lifetouch note dmsg

gistfile1.txt

# dmesg
<5>[    0.000000] Linux version 2.6.32.9-00044-g2b64cc5 (nec@Bryony) (gcc version 4.4.0 (GCC) ) #1 SMP PREEMPT Tue Jan 18 15:36:51 CST 2011
<4>[    0.000000] CPU: ARMv7 Processor [411fc090] revision 0 (ARMv7), cr=10c5387f
<4>[    0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache
<4>[    0.000000] Machine: NVIDIA Harmony Development System
<4>[    0.000000] Framebuffer tag with 65536 handle
<4>[    0.000000] Shmoo tag with 65537 handle
<4>[    0.000000] Found a warmboot tag!
<4>[    0.000000] Memory policy: ECC disabled, Data cache writealloc
<7>[    0.000000] On node 0 totalpages: 98304
<7>[    0.000000] free_area_init_node: node 0, pgdat c05ab940, node_mem_map c0698000
<7>[    0.000000]   DMA zone: 768 pages used for memmap
<7>[    0.000000]   DMA zone: 0 pages reserved
<7>[    0.000000]   DMA zone: 97536 pages, LIFO batch:31
<6>[    0.000000] PERCPU: Embedded 8 pages/cpu @c09a4000 s11040 r8192 d13536 u65536
<6>[    0.000000] pcpu-alloc: s11040 r8192 d13536 u65536 alloc=16*4096
<6>[    0.000000] pcpu-alloc: [0] 0 [0] 1 
<4>[    0.000000] Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 97536
<5>[    0.000000] Kernel command line: mem=384M@0M nvmem=128M@384M vmalloc=256M video=tegrafb console=ttyS0,115200n8 usbcore.old_scheme_first=1 no_console_suspend tegraboot=sdmmc tegrapart=pt:600:80:800,bootloader:680:400:800,fdt:1180:12c00:800,recovery:13d80:a00:800,boot:14800:1000:800,mbr:b80:200:800,system:15880:18000:800,cache:2d900:12c00:800,misc:d80:400:800,staging:40580:1f400:800,userdata:5fa00:35b600:800 
<6>[    0.000000] PID hash table entries: 2048 (order: 1, 8192 bytes)
<6>[    0.000000] Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
<6>[    0.000000] Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
<6>[    0.000000] Memory: 384MB = 384MB total
<5>[    0.000000] Memory: 382464KB available (5344K code, 1186K data, 172K init, 0K highmem)
<6>[    0.000000] SLUB: Genslabs=11, HWalign=32, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
<6>[    0.000000] Hierarchical RCU implementation.
<6>[    0.000000] NR_IRQS:416
<4>[    0.000000] Console: colour dummy device 80x30
<6>[    4.776624] Calibrating delay loop... 1998.84 BogoMIPS (lpj=9994240)
<4>[    5.046622] Mount-cache hash table entries: 512
<6>[    5.047001] CPU: Testing write buffer coherency: ok
<6>[    5.047184] Calibrating local timer... 1.19MHz.
<4>[    5.156679] CPU1: Booted secondary processor
<6>[    5.426487] Brought up 2 CPUs
<6>[    5.426501] SMP: Total of 2 processors activated (3991.14 BogoMIPS).
<7>[    5.426521] CPU0 attaching sched-domain:
<7>[    5.426531]  domain 0: span 0-1 level CPU
<7>[    5.426541]   groups: 0 1
<7>[    5.426559] CPU1 attaching sched-domain:
<7>[    5.426566]  domain 0: span 0-1 level CPU
<7>[    5.426574]   groups: 1 0
<6>[    5.450299] regulator: core version 0.5
<6>[    5.450680] NET: Registered protocol family 16
<4>[    5.451016] Chip Id: 0x20 (Handheld SOC) Major: 0x1 Minor: 0x3 SKU: 0x8
<4>[    5.451665] NVRM Got shmoo boot argument (at 0xd8874004)
<4>[    5.451676] NVRM corner (2, 1)
<4>[    5.606467] NVRM CLOCKS: PLLX0:      1000000 Khz
<4>[    5.606477] NVRM CLOCKS: PLLM0:      666000 Khz
<4>[    5.606484] NVRM CLOCKS: PLLC0:      600000 Khz
<4>[    5.606491] NVRM CLOCKS: PLLP0:      216000 Khz
<4>[    5.606497] NVRM CLOCKS: PLLA0:      11289 Khz
<4>[    5.606503] NVRM CLOCKS: CPU:        1000000 Khz
<4>[    5.606508] NVRM CLOCKS: AVP:        240000 Khz
<4>[    5.606514] NVRM CLOCKS: System Bus: 240000 Khz
<4>[    5.606523] NVRM CLOCKS: Memory Controller: 333000
<4>[    5.606531] NVRM CLOCKS: External Memory Controller: 666000
<6>[    5.784838] regulator: lbee9qmb_vdd: 1700 <--> 2000 mV 
<6>[    5.785103] regulator: soc_main: 0 mV 
<6>[    5.785380] regulator: vddio bb: 1700 <--> 2000 mV 
<6>[    5.785647] regulator: vddio lcd: 1700 <--> 2000 mV 
<6>[    5.785911] regulator: vddio vi: 1700 <--> 2000 mV 
<6>[    5.786173] regulator: vddio uart: 1700 <--> 2000 mV 
<6>[    5.786481] regulator: vddio ddr: 1700 <--> 2000 mV 
<6>[    5.786783] regulator: vddio nand: 1700 <--> 2000 mV 
<6>[    5.787060] regulator: vddio sys: 1700 <--> 2000 mV 
<6>[    5.787330] regulator: vddio audio: 1700 <--> 2000 mV 
<6>[    5.787609] regulator: vddio sd: 1700 <--> 2000 mV 
<4>[    5.794070] ADJUSTED CLOCKS:
<4>[    5.794084] MC clock is set to 333000 KHz
<4>[    5.794094] EMC clock is set to 666000 KHz (DDR clock is at 333000 KHz)
<4>[    5.794102] PLLX0 clock is set to 1000000 KHz
<4>[    5.794108] PLLC0 clock is set to 600000 KHz
<4>[    5.794114] CPU clock is set to 1000000 KHz
<4>[    5.794120] System and AVP clock is set to 240000 KHz
<4>[    5.794128] GraphicsHost clock is set to 111000 KHz
<4>[    5.794136] 3D clock is set to 111000 KHz
<4>[    5.794143] 2D clock is set to 111000 KHz
<4>[    5.794151] Epp clock is set to 111000 KHz
<4>[    5.794157] Mpe clock is set to 111000 KHz
<4>[    5.794164] Vde clock is set to 240000 KHz
<4>[    5.816737] Local timer scaling factor 2097, shift 24
<6>[    5.816775] PL310/L2C-310 cache controller enabled
<7>[    5.836282] kfuse_cache_isvalid=1
<6>[    5.838572] tegra_setup_i2c: skipping tegra_i2c.2 (SMBUS)
<4>[    5.853082] bio: create slab <bio-0> at 0
<5>[    5.853954] SCSI subsystem initialized
<6>[    5.854251] usbcore: registered new interface driver usbfs
<6>[    5.854378] usbcore: registered new interface driver hub
<6>[    5.854546] usbcore: registered new device driver usb
<6>[    5.856004] Bluetooth: Core ver 2.15
<6>[    5.856171] NET: Registered protocol family 31
<6>[    5.856178] Bluetooth: HCI device and connection manager initialized
<6>[    5.856188] Bluetooth: HCI socket layer initialized
<6>[    5.856981] Switching to clocksource timer_us
<6>[    5.861277] NET: Registered protocol family 2
<6>[    5.861357] IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
<6>[    5.861534] TCP established hash table entries: 16384 (order: 5, 131072 bytes)
<6>[    5.861739] TCP bind hash table entries: 16384 (order: 5, 196608 bytes)
<6>[    5.861953] TCP: Hash tables configured (established 16384 bind 16384)
<6>[    5.861962] TCP reno registered
<6>[    5.862062] NET: Registered protocol family 1
<6>[    5.862194] Unpacking initramfs...
<6>[    5.871145] Freeing initrd memory: 164K
<4>[    5.871991] tegra_iovmm_register: added iovmm-gart
<4>[    5.874123] ==============>Msensor_ACTIVE
<6>[    5.874256] nvrm_init called
<4>[    5.874315] nvrm probe
<4>[    5.875310] 
<4>[    5.875313] I2C Slave is *New*
<6>[    5.920037] ashmem: initialized
<6>[    5.930172] alg: No test for stdrng (krng)
<6>[    5.930203] io scheduler noop registered
<6>[    5.930212] io scheduler anticipatory registered
<6>[    5.930219] io scheduler deadline registered
<6>[    5.930270] io scheduler cfq registered (default)
<6>[    5.932163] tegra_grhost tegra_grhost: initialized
<4>[    5.932616] nvtegrafb: base address: d9000000 physical: 1fe76000
<4>[    5.932974] Console: switching to colour frame buffer device 100x30
<6>[    5.942545] Serial: 8250/16550 driver, 1 ports, IRQ sharing disabled
<6>[    5.943088] serial8250.0: ttyS0 at MMIO 0x70006000 (irq = 68) is a Tegra
<6>[    6.497771] console [ttyS0] enabled
<6>[    6.501654] tegra_uart.1: ttyHS1 at I/O 0x0 (irq = 69) is a unknown
<6>[    6.508159] Registered UART port ttyHS1
<6>[    6.512062] tegra_uart.2: ttyHS2 at I/O 0x0 (irq = 78) is a unknown
<6>[    6.518539] Registered UART port ttyHS2
<6>[    6.522524] Initialized tegra uart driver
<6>[    6.529501] loop: module loaded
<3>[    6.738077] NvRmSpiOpen() Opening channel Inst 0 and IsMaster 1
<6>[    6.745560] usbcore: registered new interface driver cdc_ether
<6>[    6.751513] usbcore: registered new interface driver smsc9500
<6>[    6.757384] usbcore: registered new interface driver cdc_subset
<6>[    6.763315] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
<6>[    6.773256] tegra-ehci tegra-ehci.2: Tegra Ehci host controller
<6>[    6.779238] tegra-ehci tegra-ehci.2: new USB bus registered, assigned bus number 1
<6>[    6.817141] tegra-ehci tegra-ehci.2: irq 129, io base 0xc5008000
<6>[    6.837135] tegra-ehci tegra-ehci.2: USB 2.0 started, EHCI 1.00
<6>[    6.843091] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
<6>[    6.849881] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
<6>[    6.857090] usb usb1: Product: Tegra Ehci host controller
<6>[    6.862488] usb usb1: Manufacturer: Linux 2.6.32.9-00044-g2b64cc5 ehci_hcd
<6>[    6.869359] usb usb1: SerialNumber: tegra-ehci.2
<6>[    6.874231] usb usb1: configuration #1 chosen from 1 choice
<6>[    6.879989] hub 1-0:1.0: USB hub found
<6>[    6.883753] hub 1-0:1.0: 1 port detected
<6>[    6.887788] tegra-ehci tegra-ehci.2: dmabounce: registered device
<6>[    6.894109] usbcore: registered new interface driver cdc_acm
<6>[    6.899783] cdc_acm: v0.26:USB Abstract Control Model driver for USB modems and ISDN adapters
<6>[    6.908418] usbcore: registered new interface driver cdc_wdm
<6>[    6.914098] Initializing USB Mass Storage driver...
<6>[    6.919112] usbcore: registered new interface driver usb-storage
<6>[    6.925129] USB Mass Storage support registered.
<6>[    6.929994] usbcore: registered new interface driver usbserial
<6>[    6.935817] usbserial: USB Serial Driver core
<6>[    6.940292] USB Serial support registered for GSM modem (1-port)
<6>[    6.946434] usbcore: registered new interface driver option
<6>[    6.952026] option: v0.7.2:USB Driver for GSM modems
<6>[    6.956981] Tegra High-Speed USB SOC Device Controller driver (Apr 20, 2007)
<3>[    6.969773] tegra-udc tegra-udc.0: vbus_draw regulator error -19; charging disabled
<6>[    6.977562] android init
<6>[    6.980135] android_probe pdata: c057e730
<6>[    6.984248] android_bind
<7>[    6.986776] android_bind_config
<4>[    6.986783] Gadget Android: controller 'tegra-udc' not recognized
<6>[    6.992890] android_usb gadget: android_usb ready
<6>[    6.997595] tegra-udc: bind to driver android_usb
<6>[    7.002420] f_adb init
<6>[    7.004773] android_register_function adb
<6>[    7.008790] f_mass_storage init
<6>[    7.011923] android_register_function usb_mass_storage
<6>[    7.017050] mass_storage_bind_config
<6>[    7.020900] fsg_probe pdata: c057e958
<6>[    7.024865] android_usb gadget: Number of LUNs=1
<6>[    7.029480] adb_bind_config
<6>[    7.073886] input: nvec keyboard as /devices/virtual/input/input0
<7>[    7.080141] evbug.c: Connected device: input0 (nvec keyboard at unknown)
<6>[    7.080280] usbcore: registered new interface driver usbtouchscreen
<3>[    7.086604] NvRmSpiOpen() Opening channel Inst 0 and IsMaster 1
<6>[    7.092971] input: nvodm_touch as /devices/virtual/input/input1
<7>[    7.099036] evbug.c: Connected device: input1 (nvodm_touch at unknown)
<6>[    7.099046] nvodm_touch: Successfully registered the ODM touch driver d8adc004
<6>[    7.141725] input: nvec button as /devices/virtual/input/input2
<7>[    7.147642] nvec_button nvec_button: input device file is opened.
<7>[    7.147824] evbug.c: Connected device: input2 (nvec button at unknown)
<4>[    7.148015] [qci_finpoint]finpoint_init()
<3>[    7.152063] [qci_finpoint] finpoint_power(1)
<6>[    7.758382] using rtc device, tegra_rtc_odm, for alarms
<6>[    7.763461] tegra_rtc_odm tegra_rtc_odm: rtc core: registered tegra_rtc_odm as rtc0
<6>[    7.771406] i2c /dev entries driver
<4>[    7.775400] XXXXXXXXXXXXXXX IR Probe XXXXXXXXXXXXXXX
<6>[    7.780618] input: qci_finpoint as /devices/virtual/input/input3
<7>[    7.786771] evbug.c: Connected device: input3 (qci_finpoint at unknown)
<4>[    7.786781] [qci_finpoint] write address = 0x3a , data = 0x5a
<4>[    7.993096] [qci_finpoint] write address = 0x60 , data = 0x84
<4>[    7.999190] [qci_finpoint] write address = 0x62 , data = 0x12
<4>[    8.005270] [qci_finpoint] write address = 0x63 , data = 0x0e
<4>[    8.011372] [qci_finpoint] write address = 0x77 , data = 0x21
<4>[    8.017949] [finpoint_init_panel]device id = 0x83
<3>[    8.022644] [finpoint_init_panel]device id = 0x83
<4>[    8.031173] [0x60]=0x84
<4>[    8.033614] [0x62]=0x12
<4>[    8.036054] [0x63]=0x0e
<4>[    8.038511] [0x64]=0x08
<4>[    8.040951] [0x65]=0x06
<4>[    8.043387] [0x66]=0x40
<4>[    8.045824] [0x67]=0x08
<4>[    8.048270] [0x68]=0x48
<4>[    8.050710] [0x69]=0x0a
<4>[    8.053148] [0x6a]=0x50
<4>[    8.055587] [0x6b]=0x48
<4>[    8.058032] [0x6d]=0xc4
<4>[    8.060469] [0x6e]=0x34
<4>[    8.062905] [0x6f]=0x3c
<4>[    8.065342] [0x70]=0x18
<4>[    8.067789] [0x71]=0x20
<4>[    8.070228] [0x73]=0x99
<4>[    8.072667] [0x74]=0x02
<4>[    8.075106] [0x75]=0x50
<4>[    8.077550] [0x77]=0x21
<4>[    8.079988] finpoint_init_client() success
<6>[    8.086714] Linux video capture interface: v2.00
<6>[    8.091691] usbcore: registered new interface driver uvcvideo
<6>[    8.097443] USB Video Class driver (v0.1.0)
<3>[    8.137897] tegra_thermal:registered
<6>[    8.142503] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
<6>[    8.150982] Bluetooth: HCI UART driver ver 2.2
<6>[    8.155418] Bluetooth: HCI H4 protocol initialized
<6>[    8.160208] Bluetooth: HCI BCSP protocol initialized
<6>[    8.165162] Bluetooth: HCILL protocol initialized
<6>[    8.170246] cpuidle: using governor ladder
<6>[    8.175010] cpuidle: using governor menu
<6>[    8.179073] sdhci: Secure Digital Host Controller Interface driver
<6>[    8.185274] sdhci: Copyright(c) Pierre Ossman
<4>[    8.192458] mmc0: Invalid maximum block size, assuming 512 bytes
<6>[    8.198625] Registered led device: mmc0::
<6>[    8.202806] mmc0: SDHCI controller on tegra-sdhci.0 [tegra-sdhci.0] using ADMA
<6>[    8.210043] tegra-sdhci tegra-sdhci.0: probe complete
<4>[    8.216528] mmc1: Invalid maximum block size, assuming 512 bytes
<6>[    8.222703] Registered led device: mmc1::
<6>[    8.226854] mmc1: SDHCI controller on tegra-sdhci.2 [tegra-sdhci.2] using ADMA
<6>[    8.234085] tegra-sdhci tegra-sdhci.2: probe complete
<4>[    8.239842] mmc2: Invalid maximum block size, assuming 512 bytes
<6>[    8.246006] Registered led device: mmc2::
<6>[    8.250253] mmc2: SDHCI controller on tegra-sdhci.3 [tegra-sdhci.3] using ADMA
<6>[    8.257464] tegra-sdhci tegra-sdhci.3: probe complete
<6>[    8.262824] Registered led device: green
<6>[    8.268969] usbcore: registered new interface driver usbhid
<6>[    8.274559] usbhid: v2.6:USB HID core driver
<6>[    8.279233] logger: created 64K log 'log_main'
<6>[    8.283825] logger: created 256K log 'log_events'
<6>[    8.288666] logger: created 64K log 'log_radio'
<6>[    8.293386] logger: created 64K log 'log_system'
<4>[    8.299034] nf_conntrack version 0.5.0 (5982 buckets, 23928 max)
<4>[    8.305346] CONFIG_NF_CT_ACCT is deprecated and will be removed soon. Please use
<4>[    8.312756] nf_conntrack.acct=1 kernel parameter, acct=1 nf_conntrack module option or
<4>[    8.320669] sysctl net.netfilter.nf_conntrack_acct=1 to enable it.
<6>[    8.327049] ip_tables: (C) 2000-2006 Netfilter Core Team
<6>[    8.332405] TCP cubic registered
<6>[    8.336619] NET: Registered protocol family 10
<6>[    8.341530] IPv6 over IPv4 tunneling driver
<6>[    8.346078] NET: Registered protocol family 17
<6>[    8.350588] Bluetooth: L2CAP ver 2.14
<6>[    8.354251] Bluetooth: L2CAP socket layer initialized
<6>[    8.359326] Bluetooth: SCO (Voice Link) ver 0.6
<6>[    8.363907] Bluetooth: SCO socket layer initialized
<6>[    8.368914] Bluetooth: RFCOMM TTY layer initialized
<6>[    8.373798] Bluetooth: RFCOMM socket layer initialized
<6>[    8.378926] Bluetooth: RFCOMM ver 1.11
<6>[    8.382701] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
<6>[    8.388004] Bluetooth: HIDP (Human Interface Emulation) ver 1.2
<6>[    8.394074] ThumbEE CPU extension supported.
<5>[    8.398347] Registering SWP/SWPB emulation handler
<6>[    8.403162] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 1
<4>[    8.411550] regulator_init_complete: incomplete constraints, leaving vddio sys on
<4>[    8.419024] regulator_init_complete: incomplete constraints, leaving vddio ddr on
<4>[    8.426513] regulator_init_complete: incomplete constraints, leaving vddio bb on
<4>[    8.433905] regulator_init_complete: incomplete constraints, leaving soc_main on
<6>[    8.442050] tegra_rtc_odm tegra_rtc_odm: setting system clock to 2011-11-26 03:52:28 UTC (1322279548)
<6>[    8.451313] Freeing init memory: 172K
<3>[    8.456545] init: /init.rc: 234: invalid option 'chmod'
<3>[    8.461841] init: /init.rc: 234: invalid option 'start'
<3>[    8.467071] init: /init.rc: 234: invalid option 'chmod'
<6>[    8.593589] mmc1: new high speed SDHC card at address b368
<6>[    8.599402] mmcblk2: mmc1:b368 SD    7.51 GiB 
<6>[    8.603960]  mmcblk2: p1
<6>[    8.737440] mmc2: new high speed MMC card at address 0001
<6>[    8.743092] mmcblk3: mmc2:0001 M8G2EM 7.45 GiB 
<6>[    8.747741]  mmcblk3: p1 p2 p3 p4 < p5 p6 p7 p8 p9 >
<6>[    9.420558] EXT3-fs: mounted filesystem with ordered data mode.
<6>[    9.426530] kjournald starting.  Commit interval 5 seconds
<4>[    9.438459] EXT2-fs warning (device mmcblk3p6): ext2_fill_super: mounting ext3 filesystem as ext2
<6>[   10.499493] kjournald starting.  Commit interval 5 seconds
<6>[   10.508528] EXT3 FS on mmcblk3p9, internal journal
<6>[   10.513318] EXT3-fs: recovery complete.
<6>[   10.521074] EXT3-fs: mounted filesystem with ordered data mode.
<6>[   10.645771] kjournald starting.  Commit interval 5 seconds
<6>[   10.722502] EXT3 FS on mmcblk3p7, internal journal
<6>[   10.727307] EXT3-fs: recovery complete.
<6>[   10.734978] EXT3-fs: mounted filesystem with ordered data mode.
<6>[   10.804042] kjournald starting.  Commit interval 5 seconds
<6>[   10.813077] EXT3 FS on mmcblk3p1, internal journal
<6>[   10.817899] EXT3-fs: recovery complete.
<6>[   10.825559] EXT3-fs: mounted filesystem with ordered data mode.
<3>[   10.947029] init: cannot find '/system/etc/install-recovery.sh', disabling 'flash_recovery'
<6>[   10.981350] warning: `adbd' uses 32-bit capabilities (legacy support in use)
<6>[   10.988550] enabling adb
<6>[   10.991229] adb_open(adbd)
<4>[   11.712379] NvRmIoctls_NvRmFbControl: deprecated 
<6>[   12.845829] ioModule=30, instance=0, config=1, enable=0
<7>[   13.649121] CPU0 attaching NULL sched-domain.
<7>[   13.649174] CPU1 attaching NULL sched-domain.
<7>[   13.847264] CPU0 attaching NULL sched-domain.
<5>[   13.857971] CPU1: clean shutdown
<4>[   13.863956] DTT: T = 36, Range = 1 (-64 : 60)
<6>[   15.288341] nvrm_notifier_store: nvrm_daemon=885
<6>[   15.307219] nvrm_notifier_show: blocking
<4>[   16.235985] CPU1: Booted secondary processor
<7>[   16.236067] CPU0 attaching NULL sched-domain.
<7>[   16.307165] CPU0 attaching sched-domain:
<7>[   16.307177]  domain 0: span 0-1 level CPU
<7>[   16.307187]   groups: 0 1
<7>[   16.307203] CPU1 attaching sched-domain:
<7>[   16.307210]  domain 0: span 0-1 level CPU
<7>[   16.307218]   groups: 1 0
<6>[   21.027723] android_usb gadget: high speed config #1: android
<7>[   24.256407] CPU0 attaching NULL sched-domain.
<7>[   24.256445] CPU1 attaching NULL sched-domain.
<7>[   24.407324] CPU0 attaching NULL sched-domain.
<5>[   24.408455] CPU1: clean shutdown
<4>[   25.784561] 
<4>[   25.784564] Dongle Host Driver, version 4.218.223.1
<7>[   26.001195] mmc0: queuing CIS tuple 0x80 length 50
<7>[   26.032662] mmc0: queuing CIS tuple 0x80 length 7
<7>[   26.043664] mmc0: queuing CIS tuple 0x80 length 7
<7>[   26.146622] mmc0: queuing CIS tuple 0x02 length 1
<6>[   26.153536] mmc0: new SDIO card at address 0001
<6>[   26.176710] request_suspend_state: wakeup (3->0) at 21399583913 (2011-11-26 03:52:46.234648681 UTC)
<4>[   26.789284] sdio_reset_comm():
<4>[   26.835552] DHD: dongle ram size is set to 294912(orig 294912)
<4>[   27.046558] Firmware version = wl0: Jul  8 2010 15:59:50 version 4.218.243.0
<4>[   27.233269] wlan0: Broadcom Dongle Host Driver mac=e0:b9:a5:09:53:f3
<4>[   27.240106] Enter wl_control_wl_start 
<4>[   27.243849] Exited wl_control_wl_start 
<4>[   27.768166] CPU1: Booted secondary processor
<7>[   27.768240] CPU0 attaching NULL sched-domain.
<7>[   27.847205] CPU0 attaching sched-domain:
<7>[   27.847217]  domain 0: span 0-1 level CPU
<7>[   27.847226]   groups: 0 1
<7>[   27.847241] CPU1 attaching sched-domain:
<7>[   27.847248]  domain 0: span 0-1 level CPU
<7>[   27.847256]   groups: 1 0
<4>[   29.481644] Unkown PRIVATE command, ignored
<4>[   29.495526] Unkown PRIVATE command, ignored
<4>[   29.514928] Unkown PRIVATE command, ignored
<4>[   29.529878] Unkown PRIVATE command, ignored
<4>[   29.546908] Unkown PRIVATE command, ignored
<7>[   38.089701] CPU0 attaching NULL sched-domain.
<7>[   38.089739] CPU1 attaching NULL sched-domain.
<7>[   38.197289] CPU0 attaching NULL sched-domain.
<5>[   38.198596] CPU1: clean shutdown
<7>[   38.237241] wlan0: no IPv6 routers present