Skip to content

Instantly share code, notes, and snippets.

@kefir-

kefir-/perimeter layer heights

Created July 10, 2013 20:32
Show Gist options
  • Star 0 You must be signed in to star a gist
  • Fork 0 You must be signed in to fork a gist
  • Save kefir-/5970060 to your computer and use it in GitHub Desktop.
Save kefir-/5970060 to your computer and use it in GitHub Desktop.
Download ZIP
Various layer heights, extrusion width varies with layer height, but "perimeters extrusion width" is always the same as my nozzle diameter, 0.35mm.
Raw
perimeter layer heights
; generated by Slic3r 0.9.11-dev on 2013-07-10 at 20:50:53
; layer_height = 0.35
; perimeters = 2
; top_solid_layers = 2
; bottom_solid_layers = 2
; fill_density = 0.3
; perimeter_speed = 80
; infill_speed = 100
; travel_speed = 300
; nozzle_diameter = 0.35
; filament_diameter = 1.75
; extrusion_multiplier = 0.9
; perimeters extrusion width = 0.35mm
; infill extrusion width = 0.37mm
; solid infill extrusion width = 0.37mm
; top infill extrusion width = 0.37mm
; first layer extrusion width = 0.88mm
-------------
; generated by Slic3r 0.9.11-dev on 2013-07-10 at 20:51:37
; layer_height = 0.3
; perimeters = 2
; top_solid_layers = 2
; bottom_solid_layers = 2
; fill_density = 0.3
; perimeter_speed = 80
; infill_speed = 100
; travel_speed = 300
; nozzle_diameter = 0.35
; filament_diameter = 1.75
; extrusion_multiplier = 0.9
; perimeters extrusion width = 0.35mm
; infill extrusion width = 0.37mm
; solid infill extrusion width = 0.37mm
; top infill extrusion width = 0.37mm
; first layer extrusion width = 0.75mm
-------------
; generated by Slic3r 0.9.11-dev on 2013-07-10 at 20:52:10
; layer_height = 0.25
; perimeters = 2
; top_solid_layers = 2
; bottom_solid_layers = 2
; fill_density = 0.3
; perimeter_speed = 80
; infill_speed = 100
; travel_speed = 300
; nozzle_diameter = 0.35
; filament_diameter = 1.75
; extrusion_multiplier = 0.9
; perimeters extrusion width = 0.35mm
; infill extrusion width = 0.39mm
; solid infill extrusion width = 0.39mm
; top infill extrusion width = 0.39mm
; first layer extrusion width = 0.62mm
-------------
; generated by Slic3r 0.9.11-dev on 2013-07-10 at 20:52:39
; layer_height = 0.15
; perimeters = 2
; top_solid_layers = 2
; bottom_solid_layers = 2
; fill_density = 0.3
; perimeter_speed = 80
; infill_speed = 100
; travel_speed = 300
; nozzle_diameter = 0.35
; filament_diameter = 1.75
; extrusion_multiplier = 0.9
; perimeters extrusion width = 0.35mm
; infill extrusion width = 0.67mm
; solid infill extrusion width = 0.59mm
; top infill extrusion width = 0.59mm
; first layer extrusion width = 0.62mm
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment