Slightly modified TM1637 C code

digitaltube.c

/*
 * Adapted from http://learn.linksprite.com/raspberry-pi/how-to-use-4-digit-7-segment-module-on-raspberrypi/
 * Removes unwanted leading 0 digit on the time, goes with 12-hour format, sets brightness down to typical.
 */
#include "TM1637.h"
#include <stdio.h>
#include <time.h>

#define clk 4//pins definitions for TM1637 and can be changed to other ports    
#define dio 5

int setup() {
  if(wiringPiSetup()==-1) {
     printf("setup wiringPi failed!");
     return 1;
  }

  pinMode(clk,INPUT);
  pinMode(dio,INPUT);
  delay(200);
  TM1637_init(clk,dio);
  TM1637_set(BRIGHT_TYPICAL,0x40,0xc0);//BRIGHT_TYPICAL = 2,BRIGHT_DARKEST = 0,BRIGHTEST = 7;
  TM1637_point(POINT_ON);
  printf("Digital Tube test code!n");
  printf("Using DATA = GPIO5, CLK = GPIO4.n");
}

int main() {
  int8_t NumTab[] = {0,1,2,3,4,5,6,7,8,9,10,11,12,13,14,15};//0~9,A,b,C,d,E,F
  int8_t ListDisp[4];
  unsigned char i = 0;
  unsigned char count = 0;
  delay(150);
  setup();
  while(1) {
    time_t rawtime;
    struct tm *info;
    time(&rawtime);
    info = localtime(&rawtime);
    int hour = info->tm_hour;
    int min = info->tm_min;
    /* strftime(hour,3,"%I", info); */

    /* printf("Formatted date & time : |%d|\n", min ); */

    unsigned char BitSelect = 0;
    i = count;
    count ++;
    if(count == sizeof(NumTab)) count = 0;
    for(BitSelect = 0;BitSelect < 4;BitSelect ++) {
      ListDisp[BitSelect] = NumTab[i];
      i ++;
      if(i == sizeof(NumTab)) i = 0;
    }
    /* hours */
    if (hour == 0) {
      TM1637_display(0,1);
      TM1637_display(1,2);
    } else if (hour > 21) {
      TM1637_display(0,1);
      TM1637_display(1,hour - 22);
    } else if (hour > 12) {
      TM1637_display(0,0x7f);
      TM1637_display(1,hour - 12);
    } else if (hour > 9) {
      TM1637_display(0,1);
      TM1637_display(1,hour - 10);
    } else {
      TM1637_display(0,0x7f);
      TM1637_display(1,hour);
    }
    /* minutes */
    int min1 = min/10;
    int min2 = min % 10;
    TM1637_display(2,min1);
    TM1637_display(3,min2);
    delay(60000);
  }
}

Mind if I ask where you sourced the TM1637.h library from? Everything I can find is for an aduino.....can't find anything to work with the PI.
Thanks!
Matt