Skip to content

Instantly share code, notes, and snippets.

Embed
What would you like to do?
Making Nvidia Drivers + CUDA 8 + Bumblebee work together on XPS 15 Early 2017 9560 kabylake. Ubuntu, KDE Neon, Linux Mint, debian.
# Instructions for 4.13 and cuda 9.0 RC
# If upgrading from 4.11 and cuda 8.0
$ sudo apt-get purge --auto-remove libcud*
$ sudo apt-get purge --auto-remove cuda*
$ sudo apt-get purge --auto-remove nvidia*
# also remove the container directory direcotory at /usr/local/cuda-8.0/
# Install Intel Graphics Patch Firmwares (This should reboot your system):
bash -c "$(curl -fsSL http://bit.ly/IGFWL-install)"
# Update to 4.13 kernel. nvidia-384 compiles fine with this.
cd /tmp
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.13/linux-headers-4.13.0-041300_4.13.0-041300.201709031731_all.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.13/linux-headers-4.13.0-041300-generic_4.13.0-041300.201709031731_amd64.deb
wget http://kernel.ubuntu.com/~kernel-ppa/mainline/v4.13/linux-image-4.13.0-041300-generic_4.13.0-041300.201709031731_amd64.deb
sudo dpkg -i *.deb
# Add Nvidia repository
sudo add-apt-repository ppa:graphics-drivers/ppa
sudo apt update
# Install via ubuntu drivers
sudo ubuntu-drivers autoinstall
# <optional for ML Folks> Install CUDA 8 (if you're interested in using gpu for ML) ~> requires nvidia stable drivers
# This acts as repo so install it somewhere safe and do not delete
# cuda is now available with membership only, download from https://developer.nvidia.com/cuda-release-candidate-download
sudo dpkg -i cuda-repo-ubuntu1604-9-0-local-rc_9.0.103-1_amd64.deb
sudo apt-key add /var/cuda-repo-<version>/7fa2af80.pub
sudo apt-get update
sudo apt-get install cuda
# Update Path to have /usr/local/cuda/bin incase using dotfiles.
# <optional for ML Folks> Install CuDNN for running things like tensorflow
# Download cudnn7 for cuda9 from nvidia https://developer.nvidia.com/cudnn
sudo dpkg -i libcudnn7_7.0.2.43-1+cuda9.0_amd64.deb
# Testing cuda.
$ sudo prime-select intel
$ nvidia-smi
# This should give an error, no drivers found
# Try this
$ sudo prime-select nvidia
# displays CUDA info.
# At this point the nvidia drivers work well enough. Search for "nvidia x server settings"
# in your applications menu and you can switch between intel and nvidia PRIME profiles.
# But the nvidia card is still ON (bbswitch will report it off, but the battery consumption is (20 +- 5) Watts
# You can leave it here if you're not worried about battery but if you are then continue with this.
# Install powertop and tlp
sudo apt install tlp powertop
# Run powertop:
sudo powertop
# You should see battery discharge around 20w +/- 5W, this eats up my battery 4 times faster.
# Add command line params:
sudo nano /etc/default/grub
# Make the following look like this, do not ask why.
GRUB_CMDLINE_LINUX_DEFAULT='pcie_port_pm=off acpi_backlight=none acpi_osi=Linux acpi_osi=! acpi_osi="Windows 2009"'
sudo update-grub2
# Install bumblebee - now this is the danger zone, this software has not been updated in a while and I am not sure when will this available.
# Avoid updating your system if you're fine with this.
sudo add-apt-repository ppa:bumblebee/testing
sudo apt update
sudo apt install bumblebee bumblebee-nvidia
# at the time of writing this, the latest is nvidia-381 but cuda 8 requires the stable, which is nvidia-375
# add them to bumblebee config file.
sudo nano /etc/bumblebee/bumblebee.conf
# Change 'Driver=' to 'Driver=nvidia'
# Change all occurences of 'nvidia-current' to 'nvidia-xxx'
# Change KernelDriver=nvidia-384
# save and run
sudo service bumblebeed restart
# this should give you daemon already running
sudo bumblebeed
# Since the driver load will now be handled by bumblebee, we need to stop the OS from loading it.
sudo nano /etc/modprobe.d/bumblebee.conf
# Make the following section look like this (the drm line will be added):
#375
blacklist nvidia-384
blacklist nvidia-384-drm
blacklist nvidia-384-updates
blacklist nvidia-experimental-384
# once that is done, you'll need bbswitch dkms module
sudo apt-get install bbswitch-dkms
# Load this with the kernel.
sudo nano /etc/modules-load.d/modules.conf
# add following
i915
bbswitch
# now make sure nvidia-settings has nvidia prime profile selected.
# So what actually happened:
# The control for switching between graphics has been moved from nvidia's driver to bumblebee. This helps
# maximize battery life because now you can selectively switch between which graphics card to use. In case
# you want to provide access to nvidia gpu for the current application run it using optirun.
# e.g. if you want to run steam with nvidia gpu, run something like: $ optirun steam
# or if you're using gpu to run ml tasks, just run them with optirun and they would work just fine.
# Additional
# TLP is known to interfere with bumblebee, make it avoid using this https://wiki.archlinux.org/index.php/Talk:Bumblebee#Bumblebee_and_TLP_interferening
# Run powertop to see if battery consumption is in check: 10w +/- 5W
# Testing bumblebee
cat /proc/acpi/bbswitch # Ouput:0000:01:00.0 OFF
optirun glxgears -info # Runs the Gears demo
optirun nvidia-smi # Should give an error
sudo prime-select nvidia # Should select nvidia hardware for cuda
optirun nvidia-smi # Outputs:
+-----------------------------------------------------------------------------+
| NVIDIA-SMI 384.98 Driver Version: 384.98 |
|-------------------------------+----------------------+----------------------+
| GPU Name Persistence-M| Bus-Id Disp.A | Volatile Uncorr. ECC |
| Fan Temp Perf Pwr:Usage/Cap| Memory-Usage | GPU-Util Compute M. |
|===============================+======================+======================|
| 0 GeForce GTX 1050 Off | 00000000:01:00.0 Off | N/A |
| N/A 45C P0 N/A / N/A | 6MiB / 4041MiB | 2% Default |
+-------------------------------+----------------------+----------------------+
+-----------------------------------------------------------------------------+
| Processes: GPU Memory |
| GPU PID Type Process name Usage |
|=============================================================================|
| 0 13778 G /usr/lib/xorg/Xorg 6MiB |
+-----------------------------------------------------------------------------+
cat /proc/acpi/bbswitch # Still Outputs:0000:01:00.0 OFF which means, we're using nvida hardware only when we run applications using optirun
# Getting mouse freezes, random misses?
dmesg -w | grep psmouse #check if your trackpad is out of sync frequently
# Add this boot flag:
"psmouse.resetafter=0"
# Other Helpful links:
http://en.community.dell.com/techcenter/os-applications/f/4613/t/19629103
https://karlgrz.com/dell-xps-15-ubuntu-tweaks/
https://hemenkapadia.github.io/blog/2016/05/07/Ubuntu-with-Nvidia-Bumblebee.html
https://askubuntu.com/questions/879856/nvidia-prime-cant-switch-to-intel/885487
http://www.webupd8.org/2016/08/how-to-install-and-configure-bumblebee.html
#Benchmarks
==================================
GpuTest 0.7.0
http://www.geeks3d.com
Module: TessMark X64
Score: 5243 points (FPS: 87)
Settings:
- 1920x1080 windowed
- antialiasing: Off
- duration: 60000 ms
Renderer:
- GeForce GTX 1050/PCIe/SSE2
- OpenGL: 4.5.0 NVIDIA 384.98
==================================
==================================
GpuTest 0.7.0
http://www.geeks3d.com
Module: Plot3D
Score: 11340 points (FPS: 189)
Settings:
- 1920x1080 windowed
- antialiasing: Off
- duration: 60000 ms
Renderer:
- GeForce GTX 1050/PCIe/SSE2
- OpenGL: 4.5.0 NVIDIA 384.98
==================================
=================================
GpuTest 0.7.0
http://www.geeks3d.com
Module: FurMark
Score: 2670 points (FPS: 44)
Settings:
- 1920x1080 windowed
- antialiasing: Off
- duration: 60000 ms
Renderer:
- GeForce GTX 1050/PCIe/SSE2
- OpenGL: 4.5.0 NVIDIA 384.98
==================================
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment