gistfile1.txt

kev-ws-aurora% qemu-system-powernv -M powernv -m 2G -nographic -vga none -cpu power9_v2.0 -kernel kernel.ppc64 -smp 4
pnv_pec_class_init
PNV: Creating PEC 0
PNV: Creating PEC 1
PNV: Creating PEC 2
-> pnv_chip_power9_realize
PNV: Initializing PEC 0
pnv_pec_realize: PEC0 creating 1 stacks
pnv_pec_stk_realize realizing stack 0
PNV: Initializing PEC 1
pnv_pec_realize: PEC1 creating 2 stacks
pnv_pec_stk_realize realizing stack 0
pnv_pec_stk_realize realizing stack 1
PNV: Initializing PEC 2
pnv_pec_realize: PEC2 creating 3 stacks
pnv_pec_stk_realize realizing stack 0
pnv_pec_stk_realize realizing stack 1
pnv_pec_stk_realize realizing stack 2
<- pnv_chip_power9_realize
pnv_pec_dt_xscom chip 0 pec 0
pnv_pec_dt_xscom chip 0 pec 1
pnv_pec_dt_xscom chip 0 pec 2
qemu-system-powernv: unknown isa device aspeed.sio@i2e
[    0.031304794,5] OPAL v6.1-153-g132fac73 starting...
[    0.032190583,7] initial console log level: memory 7, driver 5
[    0.032322022,6] CPU: P9 generation processor (max 4 threads/core)
[    0.032424491,7] CPU: Boot CPU PIR is 0x0000 PVR is 0x004e1200
[    0.032681623,7] OPAL table: 0x30118930 .. 0x30118f10, branch table: 0x30002000
[    0.033114911,7] Assigning physical memory map table for nimbus
[    0.033508161,7] FDT: Parsing fdt @0x1000000
[    0.049247009,5] CHIP: Detected Qemu simulator
[    0.049792216,6] CHIP: Initialised chip 0 from xscom@603fc00000000
[    0.050705190,6] P9 DD2.00 detected
[    0.050797463,5] CHIP: Chip ID 0000 type: P9N DD2.00
[    0.050901838,7] XSCOM: Base address: 0x603fc00000000
[    0.051105597,7] XSTOP: ibm,sw-checkstop-fir prop not found
[    0.051298122,6] MFSI 0:0: Initialized
[    0.051378653,6] MFSI 0:2: Initialized
[    0.051455695,6] MFSI 0:1: Initialized
[    0.053257060,6] LPC: LPC[000]: Initialized
[    0.053341333,7] LPC: access via MMIO @0x6030000000000
[    0.053683569,7] LPC: Default bus on chip 0x0
[    0.053953454,7] CPU: New max PIR set to 0x3
[    0.055367244,7] MEM: parsing reserved memory from reserved-names/-ranges properties
[    0.055635592,7] CPU: decrementer bits 56
[    0.055923845,6] CPU: CPU from DT PIR=0x0000 Server#=0x0 State=3
[    0.056207587,6] CPU:  1 secondary threads
[    0.059994781,7] UART: Using LPC IRQ 4
[    0.071646871,5] PLAT: Detected Qemu platform
[    3.221536616,5] CPU: All 1 processors called in...
[    3.222755676,3] SBE: Master chip ID not found.
[    3.259968551,3] FFS: Reading the flash has returned all 0xFF.
[    3.260524009,3]      Are you reading erased flash?
[    3.260986037,3]      Is something else using the flash controller?
[    3.261575800,4] FLASH: No ffs info; using raw device only
[    3.263381520,2] NVRAM: Failed to load
[    3.263935034,2] NVRAM: Failed to load
[    3.264449922,5] STB: secure boot not supported
[    3.265010882,5] STB: trusted boot not supported
[    3.265853543,4] FLASH: Can't load resource id:3. No system flash found
[    3.267039347,2] NVRAM: Failed to load
[    3.267815355,7] LPC: Routing irq 4, policy: 0 (r=1)
[    3.268036612,7] LPC: SerIRQ 4 using route 0 targetted at OPAL
[    3.269536198,3] SLW: HOMER base not set 0
[    3.270061612,3] ELOG: Error getting buffer to log error
[    3.271083742,2] NVRAM: Failed to load
[    3.272197634,3] OCC: No HOMER detected, assuming no pstates
[    3.273004173,3] ELOG: Error getting buffer to log error
[    3.273680649,2] NVRAM: Failed to load
[    3.275263976,4] FLASH: Can't load resource id:2. No system flash found
[    3.276227734,4] FLASH: Can't load resource id:0. No system flash found
[    3.277015517,4] FLASH: Can't load resource id:1. No system flash found
[    3.280568033,3] IMC: IMC Catalog load failed
[    3.282742381,2] NVRAM: Failed to load
[    3.283346064,2] NVRAM: Failed to load
[    3.283855283,2] NVRAM: Failed to load
[    3.284369333,2] NVRAM: Failed to load
[    3.304639793,3] XSCOM: write error gcid=0x0 pcb_addr=0xd010900 stat=0x0
[    3.305190713,3] ELOG: Error getting buffer to log error
[    3.305379139,3] XSCOM: Write failed, ret =  -6
[    3.306909537,3] PHB#0000[0:0]: XSCOM error addressing register 0x800
[    3.307587234,3] PHB#0000[0:0]: Failed to read version, PHB appears broken
[    3.309835443,3] XSCOM: write error gcid=0x0 pcb_addr=0xe010900 stat=0x0
[    3.310362412,3] ELOG: Error getting buffer to log error
[    3.310439686,3] XSCOM: Write failed, ret =  -6
[    3.311870513,3] PHB#0001[0:1]: XSCOM error addressing register 0x800
[    3.312468961,3] PHB#0001[0:1]: Failed to read version, PHB appears broken
[    3.314617262,3] XSCOM: write error gcid=0x0 pcb_addr=0xe010940 stat=0x0
[    3.315141844,3] ELOG: Error getting buffer to log error
[    3.315218886,3] XSCOM: Write failed, ret =  -6
[    3.316658897,3] PHB#0002[0:2]: XSCOM error addressing register 0x800
[    3.317262610,3] PHB#0002[0:2]: Failed to read version, PHB appears broken
[    3.319423381,3] XSCOM: write error gcid=0x0 pcb_addr=0xf010900 stat=0x0
[    3.319947782,3] ELOG: Error getting buffer to log error
[    3.320024888,3] XSCOM: Write failed, ret =  -6
[    3.321381533,3] PHB#0003[0:3]: XSCOM error addressing register 0x800
[    3.322031543,3] PHB#0003[0:3]: Failed to read version, PHB appears broken
[    3.325039952,3] XSCOM: write error gcid=0x0 pcb_addr=0xf010940 stat=0x0
[    3.325666494,3] ELOG: Error getting buffer to log error
[    3.325743205,3] XSCOM: Write failed, ret =  -6
[    3.327571475,3] PHB#0004[0:4]: XSCOM error addressing register 0x800
[    3.328233947,3] PHB#0004[0:4]: Failed to read version, PHB appears broken
[    3.330417845,3] XSCOM: write error gcid=0x0 pcb_addr=0xf010980 stat=0x0
[    3.330964970,3] ELOG: Error getting buffer to log error
[    3.331042472,3] XSCOM: Write failed, ret =  -6
[    3.332461558,3] PHB#0005[0:5]: XSCOM error addressing register 0x800
[    3.333349739,3] PHB#0005[0:5]: Failed to read version, PHB appears broken
[    3.336264150,2] NVRAM: Failed to load
[    3.347305700,5] PCI: Resetting PHBs and training links...
[    9.457517576,5] PCI: Probing slots...
[    9.459840130,5] PCI Summary:
[   10.349102979,5] INIT: Waiting for kernel...
[   10.349632500,5] INIT: platform wait for kernel load failed
[   10.350180043,5] INIT: Assuming kernel at 0x20000000
[   10.350915511,5] INIT: 64-bit kernel entry at 0x200124b0, size 0x1714918
[   10.351675762,3] OCC: Unassigned OCC Common Area. No sensors found
[   10.353153237,2] NVRAM: Failed to load
[   11.022188683,5] INIT: Starting kernel at 0x200124b0, fdt at 0x304e0248 16962 bytes
[   12.366016418,5] OPAL: Switch to big-endian OS
KDB: debugger backends: ddb
KDB: current backend: ddb
---<<BOOT>>---
Copyright (c) 1992-2018 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 13.0-CURRENT aea7646d79b(HEAD) GENERIC powerpc
gcc version 4.2.1 20070831 patched [FreeBSD]
WARNING: WITNESS option enabled, expect reduced performance.
VT: init without driver.
cpu0: IBM POWER9 revision 2.0, 1000.00 MHz
cpu0: Features dc007182<PPC32,PPC64,ALTIVEC,FPU,MMU,SMT,ISNOOP,ARCH205,ARCH206,VSX,TRUELE>
cpu0: Features2 eee00000<ARCH207,HTM,DSCR,ISEL,TAR,VCRYPTO,ARCH300,IEEE128,DARN>
real memory  = 2102722560 (2005 MB)
avail memory = 1954140160 (1863 MB)
arc4random: no preloaded entropy cache
random: entropy device external interface
random: registering fast source PowerISA DARN random number generator
random: fast provider: "PowerISA DARN random number generator"
kbd0 at kbdmux0
ofwbus0: <Open Firmware Device Tree> on nexus0
simplebus0: <Flattened device tree simple bus> mem 0x6030000000000-0x60300ffffffff on ofwbus0
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0000000-0x600c3c0000fff,0x600c300000000-0x600c30fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0100000-0x600c3c0100fff,0x600c320000000-0x600c32fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0200000-0x600c3c0200fff,0x600c340000000-0x600c34fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0300000-0x600c3c0300fff,0x600c360000000-0x600c36fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0400000-0x600c3c0400fff,0x600c380000000-0x600c38fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0500000-0x600c3c0500fff,0x600c3a0000000-0x600c3afffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
xicp0: <External Interrupt Presentation Controller> mem 0x6030203180000-0x603020318ffff,0x6030203190000-0x603020319ffff,0x60302031a0000-0x60302031affff,0x60302031b0000-0x60302031bffff on ofwbus0
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0000000-0x600c3c0000fff,0x600c300000000-0x600c30fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0100000-0x600c3c0100fff,0x600c320000000-0x600c32fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0200000-0x600c3c0200fff,0x600c340000000-0x600c34fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0300000-0x600c3c0300fff,0x600c360000000-0x600c36fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0400000-0x600c3c0400fff,0x600c380000000-0x600c38fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0500000-0x600c3c0500fff,0x600c3a0000000-0x600c3afffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
xics0: <External Interrupt Source Controller> on ofwbus0
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0000000-0x600c3c0000fff,0x600c300000000-0x600c30fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0100000-0x600c3c0100fff,0x600c320000000-0x600c32fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0200000-0x600c3c0200fff,0x600c340000000-0x600c34fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0300000-0x600c3c0300fff,0x600c360000000-0x600c36fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0400000-0x600c3c0400fff,0x600c380000000-0x600c38fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0500000-0x600c3c0500fff,0x600c3a0000000-0x600c3afffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
cpulist0: <Open Firmware CPU Group> on ofwbus0
cpu0: <Open Firmware CPU> on cpulist0
opal0: <OPAL Abstraction Firmware> irq 1048560,1048561,1048562,1048563,1048564,1048565,1048566,1048567,1048568,1048569,1048570,1048571,1048572,1048573 on ofwbus0
opal0: registered as a time-of-day clock, resolution 0.002000s
opalcons0: <OPAL Consoles> on opal0
uart0: <OPAL Serial Port> on opalcons0
uart0: console
opalsens0: <OPAL Sensors> on opal0
opal_sensor0: <OPAL sensor> on opalsens0
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0000000-0x600c3c0000fff,0x600c300000000-0x600c30fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0100000-0x600c3c0100fff,0x600c320000000-0x600c32fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0200000-0x600c3c0200fff,0x600c340000000-0x600c34fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0300000-0x600c3c0300fff,0x600c360000000-0x600c36fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0400000-0x600c3c0400fff,0x600c380000000-0x600c38fffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
pcib0: <OPAL Host-PCI bridge> mem 0x600c3c0500000-0x600c3c0500fff,0x600c3a0000000-0x600c3afffffff disabled on ofwbus0
pcib0: PE mapping failed: -6
device_attach: pcib0 attach returned 6
powernv_xscom0: <xscom> mem 0x603fc00000000-0x60403ffffffff on ofwbus0
Timecounter "timebase" frequency 512000000 Hz quality 0
Event timer "decrementer" frequency 512000000 Hz quality 1000
Timecounters tick every 1.000 msec
usb_needs_explore_all: no devclass
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.
random_sources_feed: rs_read for hardware device 'PowerISA DARN random number generator' returned no entropy.

Loader variables:

Manual root filesystem specification: