kevinunger

ianchen06

;End GCode
M104 S0                     ;extruder heater off
M140 S0                     ;heated bed heater off (if you have it)

G91                                    ;relative positioning
G1 E-1 F300                            ;retract the filament a bit before lifting the nozzle, to release some of the pressure
G1 Z+0.5 E-5 X-20 Y-20 F{travel_speed} ;move Z up a bit and retract filament even more
G28 X0 Y0                              ;move X/Y to min endstops, so the head is out of the way

M84                         ;steppers off