.file

conky

#!/bin/sh
echo "{\"version\":1}"
echo "[[]"
conky -c ~/.i3/conkyrc

conkyrc

background        no
out_to_console    yes
out_to_x          no
update_interval   0.05
total_run_times   0
short_units       yes
pad_percents      3
 
override_utf8_locale yes
 
TEXT
,[
  {"full_text": ${if_mpd_playing} " ","color": "\#BCB5C0"},
  {"full_text": " ♬ ${mpd_artist 20} - ${mpd_title 30} ♬ ","color":"\#BCB5C0"},
  $else""},$endif
  {"full_text": " ${time %a %d %b} | ${time %H:%M} ","color": "\#BCB5C0" }
 
]

i3config

#- i3 config file (v4)
#
# Please see http://i3wm.org/docs/userguide.html for a complete reference!
#
# This config file uses keycodes (bindsym) and was written for the QWERTY
# layout.
#
# To get a config file with the same key positions, but for your current
# layout, use the i3-config-wizard
#

#INITIALIZATIONS
#todo: add inits

# Font for window titles. Will also be used by the bar unless a different font
# is used in the bar {} block below.
font pango:terminus 8

#GAPPING
#gaps inner 11
#gaps outer 1

# This font is widely installed, provides lots of unicode glyphs, right-to-left
# text rendering and scalability on retina/hidpi displays (thanks to pango).
#font pango:DejaVu Sans Mono 8

# Before i3 v4.8, we used to recommend this one as the default:
# font -misc-fixed-medium-r-normal--13-120-75-75-C-70-iso10646-1
# The font above is very space-efficient, that is, it looks good, sharp and
# clear in small sizes. However, its unicode glyph coverage is limited, the old
# X core fonts rendering does not support right-to-left and this being a bitmap
# font, it doesn’t scale on retina/hidpi displays.

# use these keys for focus, movement, and resize directions when reaching for
# the arrows is not convenient
set $up l
set $down k
set $left j
set $right semicolon
set $mod Mod4
# use Mouse+Mod4 to drag floating windows to their wanted position
floating_modifier Mod4

## NOTE!!!
## EVERYTHING GOES AFTER THIS FOR
## USER DEFINED BINDS


#open private banking in firefox
bindsym Mod4+Shift+f exec "firefox private:http://www.rbcroyalbank.com/personal.html"



# start a terminal
bindsym Mod4+Return exec xfce4-terminal

#ALSA MUTE TOGGLE
bindsym Mod4+m exec "amixer set Master toggle"


# kill focused window
bindsym Mod4+Shift+q kill
#bindsym Mod4+Shift+l dhcpcd
#bindsym Mod4+c exec scrot -s ~/Images/Screencaps/%Y-%m-%d-%T-screenshot.png

#lewd stuff!!!! be warned
bindsym Mod4+Shift+O exec "firefox -private-window https://rule34.xxx"
bindsym Mod4+O exec "firefox -private-window https://e621.net"

bindsym Control+Shift+2 exec "sh ~/Developing/Mine/SH/scrotwindow.sh"

#playpause mpc
#bindsym Control+Shift+p exec "sh ~Developing/Mine/SH/keycontrolmpc"

bindsym Control+Shift+p exec "mpc toggle"

#mad papes dude
exec feh --bg-center ~/Images/Backgrounds/spritedesk.png
#open network manager
bindsym Mod4+n exec wicd-gtk

#open thunar (filebrowser)
bindsym Mod4+t exec thunar

#take a selection screencap
bindsym Control+Shift+4 exec "sh ~/Developing/Mine/SH/scrotselection.sh"

#REPOPULATE MPD MUSIC DATABASE
bindsym Mod4+Shift+u exec "mpc update"
#fullscreen cap [IN CONSTRUCTION]

#fre:ac launch
bindsym Mod4+b exec "sh ~/Developing/Mine/SH/launch-freac.sh"

#screenrec
bindsym Control+Shift+1 exec "sh ~/Developing/Others/screenshare.sh"

#bindsym Mod4+m sh ~/Developing/Mine/SH/screeniewithfetch.sh
# start dmenu (a program launcher)
bindsym Mod4+d exec dmenu_run
bindsym Mod4+f exec firefox
# There also is the (new) i3-dmenu-desktop which only displays applications
# shipping a .desktop file. It is a wrapper around dmenu, so you need that
# installed.
# bindsym Mod4+d exec --no-startup-id i3-dmenu-desktop

# change focus
bindsym Mod4+$left focus left
bindsym Mod4+$down focus down
bindsym Mod4+$up focus up
bindsym Mod4+$right focus right

# alternatively, you can use the cursor keys:
bindsym Mod4+Left focus left
bindsym Mod4+Down focus down
bindsym Mod4+Up focus up
bindsym Mod4+Right focus right

#bindsym Control+Shift+3 sh "~/Developing/Mine/

# move focused window
bindsym Mod4+Shift+$left move left
bindsym Mod4+Shift+$down move down
bindsym Mod4+Shift+$up move up
bindsym Mod4+Shift+$right move right

# alternatively, you can use the cursor keys:
bindsym Mod4+Shift+Left move left
bindsym Mod4+Shift+Down move down
bindsym Mod4+Shift+Up move up
bindsym Mod4+Shift+Right move right

# split in horizontal orientation
bindsym Mod4+h split h

# split in vertical orientation
bindsym Mod4+v split v

# enter fullscreen mode for the focused container
#bindsym Mod4+f fullscreen toggle

# change container layout (stacked, tabbed, toggle split)
bindsym Mod4+s layout stacking
bindsym Mod4+w layout tabbed
bindsym Mod4+e layout toggle split

# toggle tiling / floating
bindsym Mod4+Shift+space floating toggle

# change focus between tiling / floating windows
bindsym Mod4+space focus mode_toggle

# focus the parent container
bindsym Mod4+a focus parent

# focus the child container
#bindsym Mod4+d focus child

# move the currently focused window to the scratchpad
bindsym Mod4+Shift+minus move scratchpad

# Show the next scratchpad window or hide the focused scratchpad window.
# If there are multiple scratchpad windows, this command cycles through them.
bindsym Mod4+minus scratchpad show


# switch to workspace
bindsym Mod4+1 workspace 1
bindsym Mod4+2 workspace 2
bindsym Mod4+3 workspace 3
bindsym Mod4+4 workspace 4
bindsym Mod4+5 workspace 5
bindsym Mod4+6 workspace 6
bindsym Mod4+7 workspace 7
bindsym Mod4+8 workspace 8
bindsym Mod4+9 workspace 9
bindsym Mod4+0 workspace 10

# move focused container to workspace
bindsym Mod4+Shift+1 move container to workspace 1
bindsym Mod4+Shift+2 move container to workspace 2
bindsym Mod4+Shift+3 move container to workspace 3
bindsym Mod4+Shift+4 move container to workspace 4
bindsym Mod4+Shift+5 move container to workspace 5
bindsym Mod4+Shift+6 move container to workspace 6
bindsym Mod4+Shift+7 move container to workspace 7
bindsym Mod4+Shift+8 move container to workspace 8
bindsym Mod4+Shift+9 move container to workspace 9
bindsym Mod4+Shift+0 move container to workspace 10

# reload the configuration file
bindsym Mod4+Shift+c reload
# restart i3 inplace (preserves your layout/session, can be used to upgrade i3)
bindsym Mod4+Shift+r restart
# exit i3 (logs you out of your X session)
bindsym Mod4+Shift+e exec "i3-nagbar -t warning -m 'You pressed the exit shortcut. Do you really want to exit i3? This will end your X session.' -b 'Yes, exit i3' 'i3-msg exit'"

# resize window (you can also use the mouse for that)
mode "resize" {
        # These bindings trigger as soon as you enter the resize mode

        # Pressing left will shrink the window’s width.
        # Pressing right will grow the window’s width.
        # Pressing up will shrink the window’s height.
        # Pressing down will grow the window’s height.
        bindsym $left       resize shrink width 5 px or 5 ppt
        bindsym $down       resize grow height 5 px or 5 ppt
        bindsym $up         resize shrink height 5 px or 5 ppt
        bindsym $right      resize grow width 5 px or 5 ppt

        # same bindings, but for the arrow keys
        bindsym Left        resize shrink width 5 px or 5 ppt
        bindsym Down        resize grow height 5 px or 5 ppt
        bindsym Up          resize shrink height 5 px or 5 ppt
        bindsym Right       resize grow width 5 px or 5 ppt

        # back to normal: Enter or Escape
        bindsym Return mode "default"
        bindsym Escape mode "default"
}

bindsym Mod4+r mode "resize"

# Start i3bar to display a workspace bar (plus the system information i3status
# finds out, if available)
bar {
	position top
	status_command ~/.i3/conky
	colors {
		#statusline #E5D5F2
		statusline #000000
		background #073642
		focused_workspace #839496 #839486 #fdf6e3
		inactive_workspace #839496 #839496 #bcb5c0
	}

        #status_command i3bar -c ~/.i3/i3status.conf
}
#feh
for_window [class="^.*"] border pixel 1


#######################################################################
# automatically start i3-config-wizard to offer the user to create a
# keysym-based config which used their favorite modifier (alt or windows)
#
# i3-config-wizard will not launch if there already is a config file
# in ~/.i3/config.
#
# Please remove the following exec line:
#######################################################################
#exec i3-config-wizard