dmesg.log

Initializing cgroup subsys cpuset
Initializing cgroup subsys cpu
Initializing cgroup subsys cpuacct
Linux version 3.13.3-tinycore64 (root@11238c149617) (gcc version 4.6.3 (Ubuntu/Linaro 4.6.3-1ubuntu5) ) #1 SMP Wed Feb 19 01:15:06 UTC 2014
Command line: loglevel=3 user=docker console=ttyS0 console=tty0 nomodeset norestore base initrd=/boot/initrd.img BOOT_IMAGE=/boot/vmlinuz64 
e820: BIOS-provided physical RAM map:
BIOS-e820: [mem 0x0000000000000000-0x000000000009fbff] usable
BIOS-e820: [mem 0x000000000009fc00-0x000000000009ffff] reserved
BIOS-e820: [mem 0x00000000000f0000-0x00000000000fffff] reserved
BIOS-e820: [mem 0x0000000000100000-0x000000003ffeffff] usable
BIOS-e820: [mem 0x000000003fff0000-0x000000003fffffff] ACPI data
BIOS-e820: [mem 0x00000000fffc0000-0x00000000ffffffff] reserved
NX (Execute Disable) protection: active
SMBIOS 2.5 present.
DMI: innotek GmbH VirtualBox/VirtualBox, BIOS VirtualBox 12/01/2006
e820: update [mem 0x00000000-0x00000fff] usable ==> reserved
e820: remove [mem 0x000a0000-0x000fffff] usable
No AGP bridge found
e820: last_pfn = 0x3fff0 max_arch_pfn = 0x400000000
MTRR default type: uncachable
MTRR variable ranges disabled:
x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
CPU MTRRs all blank - virtualized system.
found SMP MP-table at [mem 0x0009fff0-0x0009ffff] mapped at [ffff88000009fff0]
Base memory trampoline at [ffff880000099000] 99000 size 24576
init_memory_mapping: [mem 0x00000000-0x000fffff]
 [mem 0x00000000-0x000fffff] page 4k
BRK [0x01a19000, 0x01a19fff] PGTABLE
BRK [0x01a1a000, 0x01a1afff] PGTABLE
BRK [0x01a1b000, 0x01a1bfff] PGTABLE
init_memory_mapping: [mem 0x3e800000-0x3e9fffff]
 [mem 0x3e800000-0x3e9fffff] page 2M
init_memory_mapping: [mem 0x3c000000-0x3e7fffff]
 [mem 0x3c000000-0x3e7fffff] page 2M
init_memory_mapping: [mem 0x00100000-0x3bffffff]
 [mem 0x00100000-0x001fffff] page 4k
 [mem 0x00200000-0x3bffffff] page 2M
init_memory_mapping: [mem 0x3ea00000-0x3ffeffff]
 [mem 0x3ea00000-0x3fdfffff] page 2M
 [mem 0x3fe00000-0x3ffeffff] page 4k
BRK [0x01a1c000, 0x01a1cfff] PGTABLE
RAMDISK: [mem 0x3eba3000-0x3ffcefff]
ACPI: RSDP 00000000000e0000 000024 (v02 VBOX  )
ACPI: XSDT 000000003fff0040 000044 (v01 VBOX   VBOXXSDT 00000001 ASL  00000061)
ACPI: FACP 000000003fff0110 0000F4 (v04 VBOX   VBOXFACP 00000001 ASL  00000061)
ACPI: DSDT 000000003fff04f0 001B96 (v01 VBOX   VBOXBIOS 00000002 INTL 20100528)
ACPI: FACS 000000003fff0240 000040
ACPI: APIC 000000003fff0280 00005C (v02 VBOX   VBOXAPIC 00000001 ASL  00000061)
ACPI: HPET 000000003fff02e0 000038 (v01 VBOX   VBOXHPET 00000001 ASL  00000061)
ACPI: SSDT 000000003fff0320 0001CC (v01 VBOX   VBOXCPUT 00000002 INTL 20100528)
ACPI: Local APIC address 0xfee00000
 [ffffea0000000000-ffffea0000dfffff] PMD -> [ffff88003d200000-ffff88003dffffff] on node 0
Zone ranges:
  DMA      [mem 0x00001000-0x00ffffff]
  DMA32    [mem 0x01000000-0xffffffff]
  Normal   empty
Movable zone start for each node
Early memory node ranges
  node   0: [mem 0x00001000-0x0009efff]
  node   0: [mem 0x00100000-0x3ffeffff]
On node 0 totalpages: 262030
  DMA zone: 56 pages used for memmap
  DMA zone: 21 pages reserved
  DMA zone: 3998 pages, LIFO batch:0
  DMA32 zone: 3528 pages used for memmap
  DMA32 zone: 258032 pages, LIFO batch:31
ACPI: PM-Timer IO Port: 0x4008
ACPI: Local APIC address 0xfee00000
ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
ACPI: IRQ0 used by override.
ACPI: IRQ2 used by override.
ACPI: IRQ9 used by override.
Using ACPI (MADT) for SMP configuration information
ACPI: HPET id: 0x8086a201 base: 0xfed00000
smpboot: Allowing 2 CPUs, 0 hotplug CPUs
nr_irqs_gsi: 40
PM: Registered nosave memory: [mem 0x0009f000-0x0009ffff]
PM: Registered nosave memory: [mem 0x000a0000-0x000effff]
PM: Registered nosave memory: [mem 0x000f0000-0x000fffff]
e820: [mem 0x40000000-0xfffbffff] available for PCI devices
setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
PERCPU: Embedded 26 pages/cpu @ffff88003e800000 s74688 r8192 d23616 u1048576
pcpu-alloc: s74688 r8192 d23616 u1048576 alloc=1*2097152
pcpu-alloc: [0] 0 1 
Built 1 zonelists in Zone order, mobility grouping on.  Total pages: 258425
Kernel command line: loglevel=3 user=docker console=ttyS0 console=tty0 nomodeset norestore base initrd=/boot/initrd.img BOOT_IMAGE=/boot/vmlinuz64 
PID hash table entries: 4096 (order: 3, 32768 bytes)
Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes)
Inode-cache hash table entries: 65536 (order: 7, 524288 bytes)
Checking aperture...
No AGP bridge found
Memory: 1000860K/1048120K available (4667K kernel code, 585K rwdata, 1232K rodata, 816K init, 716K bss, 47260K reserved)
Hierarchical RCU implementation.
	CONFIG_RCU_FANOUT set to non-default value of 32
	RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2.
NR_IRQS:4352 nr_irqs:512 16
Console: colour VGA+ 80x25
console [tty0] enabled
console [ttyS0] enabled
allocated 4194304 bytes of page_cgroup
please try 'cgroup_disable=memory' option if you don't want memory cgroups
hpet clockevent registered
tsc: Fast TSC calibration failed
tsc: Unable to calibrate against PIT
tsc: using HPET reference calibration
tsc: Detected 2305.295 MHz processor
Calibrating delay loop (skipped), value calculated using timer frequency.. 4612.69 BogoMIPS (lpj=7684316)
pid_max: default: 32768 minimum: 301
Mount-cache hash table entries: 256
Initializing cgroup subsys memory
Initializing cgroup subsys devices
Initializing cgroup subsys freezer
Initializing cgroup subsys blkio
Initializing cgroup subsys perf_event
CPU: Physical Processor ID: 0
CPU: Processor Core ID: 0
mce: CPU supports 0 MCE banks
Last level iTLB entries: 4KB 128, 2MB 4, 4MB 4
Last level dTLB entries: 4KB 256, 2MB 0, 4MB 32
tlb_flushall_shift: -1
Freeing SMP alternatives memory: 16K (ffffffff81960000 - ffffffff81964000)
ACPI: Core revision 20131115
ACPI: All ACPI Tables successfully acquired
..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
smpboot: CPU0: Intel(R) Core(TM)2 Duo CPU     P8600  @ 2.40GHz (fam: 06, model: 17, stepping: 0a)
Performance Events: unsupported p6 CPU model 23 no PMU driver, software events only.
x86: Booting SMP configuration:
mce: CPU supports 0 MCE banks
.... node  #0, CPUs:      #1
x86: Booted up 1 node, 2 CPUs
smpboot: Total of 2 processors activated (9224.39 BogoMIPS)
NET: Registered protocol family 16
cpuidle: using governor ladder
cpuidle: using governor menu
ACPI: bus type PCI registered
PCI: Using configuration type 1 for base access
bio: create slab <bio-0> at 0
ACPI: Added _OSI(Module Device)
ACPI: Added _OSI(Processor Device)
ACPI: Added _OSI(3.0 _SCP Extensions)
ACPI: Added _OSI(Processor Aggregator Device)
ACPI: Executed 1 blocks of module-level executable AML code
ACPI: Interpreter enabled
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S1_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S2_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S3_] (20131115/hwxface-580)
ACPI Exception: AE_NOT_FOUND, While evaluating Sleep State [\_S4_] (20131115/hwxface-580)
ACPI: (supports S0 S5)
ACPI: Using IOAPIC for interrupt routing
PCI: Ignoring host bridge windows from ACPI; if necessary, use "pci=use_crs" and report a bug
ACPI: No dock devices found.
ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
acpi PNP0A03:00: _OSC: OS supports [ASPM ClockPM Segments MSI]
acpi PNP0A03:00: _OSC failed (AE_NOT_FOUND); disabling ASPM
acpi PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
acpi PNP0A03:00: host bridge window [io  0x0d00-0xffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x000a0000-0x000bffff] (ignored)
acpi PNP0A03:00: host bridge window [mem 0x40000000-0xffdfffff] (ignored)
PCI: root bus 00: using default resources
acpi PNP0A03:00: fail to add MMCONFIG information, can't access extended PCI configuration space under this bridge.
PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io  0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x00000000-0xfffffffff]
pci 0000:00:00.0: [8086:1237] type 00 class 0x060000
pci 0000:00:01.0: [8086:7000] type 00 class 0x060100
pci 0000:00:02.0: [80ee:beef] type 00 class 0x030000
pci 0000:00:02.0: reg 0x10: [mem 0xe0000000-0xe07fffff pref]
pci 0000:00:03.0: [1af4:1000] type 00 class 0x020000
pci 0000:00:03.0: reg 0x10: [io  0xd000-0xd01f]
pci 0000:00:04.0: [80ee:cafe] type 00 class 0x088000
pci 0000:00:04.0: reg 0x10: [io  0xd020-0xd03f]
pci 0000:00:04.0: reg 0x14: [mem 0xf0000000-0xf03fffff]
pci 0000:00:04.0: reg 0x18: [mem 0xf0400000-0xf0403fff pref]
pci 0000:00:07.0: [8086:7113] type 00 class 0x068000
pci 0000:00:0d.0: [8086:2829] type 00 class 0x010601
pci 0000:00:0d.0: reg 0x10: [io  0xd040-0xd047]
pci 0000:00:0d.0: reg 0x18: [io  0xd050-0xd057]
pci 0000:00:0d.0: reg 0x20: [io  0xd060-0xd06f]
pci 0000:00:0d.0: reg 0x24: [mem 0xf0404000-0xf0405fff]
pci_bus 0000:00: on NUMA node 0
ACPI: PCI Interrupt Link [LNKA] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKB] (IRQs 5 9 10 *11)
ACPI: PCI Interrupt Link [LNKC] (IRQs 5 9 *10 11)
ACPI: PCI Interrupt Link [LNKD] (IRQs 5 *9 10 11)
ACPI: Enabled 1 GPEs in block 00 to 07
ACPI: \_SB_.PCI0: notify handler is installed
Found 1 acpi root devices
vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
vgaarb: loaded
vgaarb: bridge control possible 0000:00:02.0
SCSI subsystem initialized
libata version 3.00 loaded.
ACPI: bus type USB registered
usbcore: registered new interface driver usbfs
usbcore: registered new interface driver hub
usbcore: registered new device driver usb
Linux video capture interface: v2.00
PCI: Using ACPI for IRQ routing
PCI: pci_cache_line_size set to 64 bytes
e820: reserve RAM buffer [mem 0x0009fc00-0x0009ffff]
e820: reserve RAM buffer [mem 0x3fff0000-0x3fffffff]
HPET: 3 timers in total, 0 timers will be used for per-cpu timer
hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
hpet0: 3 comparators, 64-bit 100.000000 MHz counter
Switched to clocksource hpet
pnp: PnP ACPI init
ACPI: bus type PNP registered
pnp 00:00: Plug and Play ACPI device, IDs PNP0303 (active)
pnp 00:01: [dma 4]
pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
pnp 00:02: Plug and Play ACPI device, IDs PNP0f03 (active)
pnp 00:03: Plug and Play ACPI device, IDs PNP0400 (active)
system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
system 00:04: Plug and Play ACPI device, IDs PNP0103 PNP0c01 (active)
pnp: PnP ACPI: found 5 devices
ACPI: bus type PNP unregistered
pci_bus 0000:00: resource 4 [io  0x0000-0xffff]
pci_bus 0000:00: resource 5 [mem 0x00000000-0xfffffffff]
NET: Registered protocol family 2
TCP established hash table entries: 8192 (order: 4, 65536 bytes)
TCP bind hash table entries: 8192 (order: 5, 131072 bytes)
TCP: Hash tables configured (established 8192 bind 8192)
TCP: reno registered
UDP hash table entries: 512 (order: 2, 16384 bytes)
UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
NET: Registered protocol family 1
RPC: Registered named UNIX socket transport module.
RPC: Registered udp transport module.
RPC: Registered tcp transport module.
RPC: Registered tcp NFSv4.1 backchannel transport module.
pci 0000:00:00.0: Limiting direct PCI/PCI transfers
pci 0000:00:01.0: Activating ISA DMA hang workarounds
pci 0000:00:02.0: Boot video device
PCI: CLS 0 bytes, default 64
Trying to unpack rootfs image as initramfs...
Freeing initrd memory: 20656K (ffff88003eba3000 - ffff88003ffcf000)
platform rtc_cmos: registered platform RTC device (no PNP device found)
NFS: Registering the id_resolver key type
Key type id_resolver registered
Key type id_legacy registered
fuse init (API version 7.22)
aufs 3.13-20140127
msgmni has been set to 1995
NET: Registered protocol family 38
Block layer SCSI generic (bsg) driver version 0.4 loaded (major 252)
io scheduler noop registered
io scheduler deadline registered (default)
xz_dec_test: module loaded
xz_dec_test: Create a device node with 'mknod xz_dec_test c 251 0' and write .xz files to it.
pci_hotplug: PCI Hot Plug PCI Core version: 0.5
pciehp: PCI Express Hot Plug Controller Driver version: 0.4
intel_idle: does not run on family 6 model 23
input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0
ACPI: Power Button [PWRF]
input: Sleep Button as /devices/LNXSYSTM:00/LNXSLPBN:00/input/input1
ACPI: Sleep Button [SLPF]
GHES: HEST is not enabled!
Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
Non-volatile memory driver v1.3
Hangcheck: starting hangcheck timer 0.9.1 (tick is 180 seconds, margin is 60 seconds).
Hangcheck: Using getrawmonotonic().
brd: module loaded
mtip32xx Version 1.2.6os3
Error creating debugfs parent
VMware PVSCSI driver - version 1.0.2.0-k
ahci 0000:00:0d.0: version 3.0
ahci 0000:00:0d.0: SSS flag set, parallel bus scan disabled
ahci 0000:00:0d.0: AHCI 0001.0100 32 slots 30 ports 3 Gbps 0x3fffffff impl SATA mode
ahci 0000:00:0d.0: flags: 64bit ncq stag only ccc 
scsi0 : ahci
scsi1 : ahci
scsi2 : ahci
scsi3 : ahci
scsi4 : ahci
scsi5 : ahci
scsi6 : ahci
scsi7 : ahci
scsi8 : ahci
scsi9 : ahci
scsi10 : ahci
scsi11 : ahci
scsi12 : ahci
scsi13 : ahci
scsi14 : ahci
scsi15 : ahci
scsi16 : ahci
scsi17 : ahci
scsi18 : ahci
scsi19 : ahci
scsi20 : ahci
scsi21 : ahci
scsi22 : ahci
scsi23 : ahci
scsi24 : ahci
scsi25 : ahci
scsi26 : ahci
scsi27 : ahci
scsi28 : ahci
scsi29 : ahci
ata1: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404100 irq 21
ata2: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404180 irq 21
ata3: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404200 irq 21
ata4: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404280 irq 21
ata5: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404300 irq 21
ata6: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404380 irq 21
ata7: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404400 irq 21
ata8: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404480 irq 21
ata9: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404500 irq 21
ata10: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404580 irq 21
ata11: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404600 irq 21
ata12: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404680 irq 21
ata13: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404700 irq 21
ata14: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404780 irq 21
ata15: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404800 irq 21
ata16: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404880 irq 21
ata17: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404900 irq 21
ata18: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404980 irq 21
ata19: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404a00 irq 21
ata20: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404a80 irq 21
ata21: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404b00 irq 21
ata22: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404b80 irq 21
ata23: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404c00 irq 21
ata24: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404c80 irq 21
ata25: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404d00 irq 21
ata26: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404d80 irq 21
ata27: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404e00 irq 21
ata28: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404e80 irq 21
ata29: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404f00 irq 21
ata30: SATA max UDMA/133 abar m8192@0xf0404000 port 0xf0404f80 irq 21
scsi30 : pata_legacy
ata31: PATA max PIO4 cmd 0x1f0 ctl 0x3f6 irq 14
hrtimer: interrupt took 18954902 ns
ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata1.00: ATAPI: VBOX CD-ROM, 1.0, max UDMA/133
ata1.00: applying bridge limits
ata1.00: configured for UDMA/100
scsi 0:0:0:0: CD-ROM            VBOX     CD-ROM           1.0  PQ: 0 ANSI: 5
sr0: scsi3-mmc drive: 32x/32x xa/form2 tray
cdrom: Uniform CD-ROM driver Revision: 3.20
sr 0:0:0:0: Attached scsi CD-ROM sr0
sr 0:0:0:0: Attached scsi generic sg0 type 5
ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
ata2.00: ATA-6: VBOX HARDDISK, 1.0, max UDMA/133
ata2.00: 81920000 sectors, multi 128: LBA48 NCQ (depth 31/32)
ata2.00: configured for UDMA/133
scsi 1:0:0:0: Direct-Access     ATA      VBOX HARDDISK    1.0  PQ: 0 ANSI: 5
sd 1:0:0:0: Attached scsi generic sg1 type 0
sd 1:0:0:0: [sda] 81920000 512-byte logical blocks: (41.9 GB/39.0 GiB)
sd 1:0:0:0: [sda] Write Protect is off
sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
 sda: sda1
sd 1:0:0:0: [sda] Attached SCSI disk
ata3: SATA link down (SStatus 0 SControl 300)
ata4: SATA link down (SStatus 0 SControl 300)
ata5: SATA link down (SStatus 0 SControl 300)
Switched to clocksource tsc
ata6: SATA link down (SStatus 0 SControl 300)
ata7: SATA link down (SStatus 0 SControl 300)
ata8: SATA link down (SStatus 0 SControl 300)
ata9: SATA link down (SStatus 0 SControl 300)
ata10: SATA link down (SStatus 0 SControl 300)
ata11: SATA link down (SStatus 0 SControl 300)
ata12: SATA link down (SStatus 0 SControl 300)
ata13: SATA link down (SStatus 0 SControl 300)
ata14: SATA link down (SStatus 0 SControl 300)
ata15: SATA link down (SStatus 0 SControl 300)
ata16: SATA link down (SStatus 0 SControl 300)
ata17: SATA link down (SStatus 0 SControl 300)
ata18: SATA link down (SStatus 0 SControl 300)
ata19: SATA link down (SStatus 0 SControl 300)
ata20: SATA link down (SStatus 0 SControl 300)
ata21: SATA link down (SStatus 0 SControl 300)
ata22: SATA link down (SStatus 0 SControl 300)
ata23: SATA link down (SStatus 0 SControl 300)
ata24: SATA link down (SStatus 0 SControl 300)
ata25: SATA link down (SStatus 0 SControl 300)
ata26: SATA link down (SStatus 0 SControl 300)
ata27: SATA link down (SStatus 0 SControl 300)
ata28: SATA link down (SStatus 0 SControl 300)
ata29: SATA link down (SStatus 0 SControl 300)
ata30: SATA link down (SStatus 0 SControl 300)
scsi31 : pata_legacy
ata32: PATA max PIO4 cmd 0x170 ctl 0x376 irq 15
libphy: Fixed MDIO Bus: probed
tun: Universal TUN/TAP device driver, 1.6
tun: (C) 1999-2004 Max Krasnyansky <maxk@qualcomm.com>
PPP generic driver version 2.4.2
PPP Deflate Compression module registered
NET: Registered protocol family 24
ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
ehci-pci: EHCI PCI platform driver
ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
ohci-pci: OHCI PCI platform driver
uhci_hcd: USB Universal Host Controller Interface driver
usbcore: registered new interface driver usb-storage
usbcore: registered new interface driver ums-alauda
usbcore: registered new interface driver ums-cypress
usbcore: registered new interface driver ums-datafab
usbcore: registered new interface driver ums_eneub6250
usbcore: registered new interface driver ums-freecom
usbcore: registered new interface driver ums-isd200
usbcore: registered new interface driver ums-jumpshot
usbcore: registered new interface driver ums-karma
usbcore: registered new interface driver ums-onetouch
usbcore: registered new interface driver ums-sddr09
usbcore: registered new interface driver ums-sddr55
usbcore: registered new interface driver ums-usbat
i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
mousedev: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
usbcore: registered new interface driver appletouch
usbcore: registered new interface driver bcm5974
usbcore: registered new interface driver synaptics_usb
rtc_cmos rtc_cmos: rtc core: registered rtc_cmos as rtc0
rtc_cmos rtc_cmos: alarms up to one day, 114 bytes nvram, hpet irqs
softdog: Software Watchdog Timer: 0.08 initialized. soft_noboot=0 soft_margin=60 sec soft_panic=0 (nowayout=0)
ledtrig-cpu: registered to indicate activity on CPUs
hidraw: raw HID events driver (C) Jiri Kosina
usbcore: registered new interface driver usbhid
usbhid: USB HID core driver
zram: Created 1 device(s) ...
Netfilter messages via NETLINK v0.30.
nfnl_acct: registering with nfnetlink.
ipip: IPv4 over IPv4 tunneling driver
IPv4 over IPSec tunneling driver
ip_tables: (C) 2000-2006 Netfilter Core Team
TCP: cubic registered
Initializing XFRM netlink socket
NET: Registered protocol family 17
NET: Registered protocol family 15
Key type dns_resolver registered
registered taskstats version 1
rtc_cmos rtc_cmos: setting system clock to 2014-02-26 14:54:18 UTC (1393426458)
Freeing unused kernel memory: 816K (ffffffff81894000 - ffffffff81960000)
Write protecting the kernel read-only data: 8192k
Freeing unused kernel memory: 1468K (ffff880001491000 - ffff880001600000)
Freeing unused kernel memory: 816K (ffff880001734000 - ffff880001800000)
input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input4
loop: module loaded
piix4_smbus 0000:00:07.0: SMBus base address uninitialized - upgrade BIOS or use force_addr=0xaddr
Linux agpgart interface v0.103
random: mkswap urandom read with 17 bits of entropy available
Adding 188792k swap on /dev/zram0.  Priority:-1 extents:1 across:188792k SSFS
input: PC Speaker as /devices/platform/pcspkr/input/input5
squashfs: version 4.0 (2009/01/31) Phillip Lougher
ACPI: Battery Slot [BAT0] (battery present)
parport_pc 00:03: reported by Plug and Play ACPI
ACPI: AC Adapter [AC] (off-line)
ppdev: user-space parallel port driver
EXT4-fs (sda1): couldn't mount as ext3 due to feature incompatibilities
EXT4-fs (sda1): couldn't mount as ext2 due to feature incompatibilities
EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
NET: Registered protocol family 10
Bridge firewalling registered
nf_conntrack version 0.5.0 (8004 buckets, 32016 max)
random: nonblocking pool is initialized
atkbd serio0: Spurious NAK on isa0060/serio0. Some program might be trying to access hardware directly.