dmesg.log

[    0.000000] Booting Linux on physical CPU 0x0000000000 [0x517f803c]
[    0.000000] Linux version 5.3.0-rc1_1 (j@gravity) (gcc version 9.1.0 (GCC)) #1 SMP Mon Sep 2 06:51:54 UTC 2019
[    0.000000] Machine model: Lenovo Yoga C630
[    0.000000] earlycon: efifb0 at I/O port 0x0 (options '')
[    0.000000] printk: bootconsole [efifb0] enabled
[    0.000000] printk: debug: ignoring loglevel setting.
[    0.000000] efi: Getting EFI parameters from FDT:
[    0.000000] efi: EFI v2.60 by American Megatrends
[    0.000000] efi:  ACPI 2.0=0xffffd000  ESRT=0xdc612e18  SMBIOS=0xffe09000  MEMATTR=0xdc60f418  RNG=0xe291bc18  MEMRESERVE=0xbb3f7e98 
[    0.000000] efi: seeding entropy pool
[    0.000000] esrt: Reserving ESRT space from 0x00000000dc612e18 to 0x00000000dc612e50.
[    0.000000] cma: Reserved 32 MiB at 0x00000000df800000
[    0.000000] NUMA: No NUMA configuration found
[    0.000000] NUMA: Faking a node at [mem 0x0000000080000000-0x000000027c79ffff]
[    0.000000] NUMA: NODE_DATA [mem 0x27b8f4800-0x27b8f5fff]
[    0.000000] Zone ranges:
[    0.000000]   DMA32    [mem 0x0000000080000000-0x00000000ffffffff]
[    0.000000]   Normal   [mem 0x0000000100000000-0x000000027c79ffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000080000000-0x00000000803fffff]
[    0.000000]   node   0: [mem 0x0000000080400000-0x0000000080d5ffff]
[    0.000000]   node   0: [mem 0x0000000081ac0000-0x00000000856fffff]
[    0.000000]   node   0: [mem 0x0000000085f10000-0x0000000085fbffff]
[    0.000000]   node   0: [mem 0x000000008c517000-0x000000008c5fffff]
[    0.000000]   node   0: [mem 0x0000000097c00000-0x0000000098efffff]
[    0.000000]   node   0: [mem 0x0000000099500000-0x000000009ffcffff]
[    0.000000]   node   0: [mem 0x000000009ffd0000-0x000000009ffd9fff]
[    0.000000]   node   0: [mem 0x000000009ffdd000-0x000000009fffffff]
[    0.000000]   node   0: [mem 0x00000000a0000000-0x00000000e1b39fff]
[    0.000000]   node   0: [mem 0x00000000e1b3a000-0x00000000ffe59fff]
[    0.000000]   node   0: [mem 0x00000000ffe5a000-0x000000027c79ffff]
[    0.000000] Zeroed struct page in unavailable ranges: 502 pages
[    0.000000] Initmem setup node 0 [mem 0x0000000080000000-0x000000027c79ffff]
[    0.000000] On node 0 totalpages: 2003158
[    0.000000]   DMA32 zone: 6949 pages used for memmap
[    0.000000]   DMA32 zone: 0 pages reserved
[    0.000000]   DMA32 zone: 444726 pages, LIFO batch:63
[    0.000000]   Normal zone: 24351 pages used for memmap
[    0.000000]   Normal zone: 1558432 pages, LIFO batch:63
[    0.000000] psci: probing for conduit method from DT.
[    0.000000] psci: PSCIv1.1 detected in firmware.
[    0.000000] psci: Using standard PSCI v0.2 function IDs
[    0.000000] psci: MIGRATE_INFO_TYPE not supported.
[    0.000000] psci: SMC Calling Convention v1.1
[    0.000000] psci: OSI mode supported.
[    0.000000] percpu: Embedded 24 pages/cpu s57640 r8192 d32472 u98304
[    0.000000] pcpu-alloc: s57640 r8192 d32472 u98304 alloc=24*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Detected VIPT I-cache on CPU0
[    0.000000] CPU features: detected: GIC system register CPU interface
[    0.000000] CPU features: kernel page table isolation forced ON by KASLR
[    0.000000] CPU features: detected: Kernel page table isolation (KPTI)
[    0.000000] CPU features: detected: Hardware dirty bit management
[    0.000000] Speculative Store Bypass Disable mitigation not required
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 1971858
[    0.000000] Policy zone: Normal
[    0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinux-5.3.0-rc1_1 root=UUID=c436db96-0e54-42ce-8e4d-f2c65be7784e ro root=PARTUUID=637cbe98-d2db-4ae4-b513-022b30fdcd8f rw earlycon=efifb efi=novamap ignore_loglevel clk_ignore_unused pd_ignore_unused console=tty0
[    0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear)
[    0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off
[    0.000000] software IO TLB: mapped [mem 0xd860f000-0xdc60f000] (64MB)
[    0.000000] Memory: 7191616K/8012632K available (11836K kernel code, 1824K rwdata, 6228K rodata, 4992K init, 383K bss, 788248K reserved, 32768K cma-reserved)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] rcu: Hierarchical RCU implementation.
[    0.000000] rcu: 	RCU event tracing is enabled.
[    0.000000] rcu: 	RCU restricting CPUs from NR_CPUS=64 to nr_cpu_ids=8.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
[    0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=8
[    0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
[    0.000000] GICv3: Distributor has no Range Selector support
[    0.000000] GICv3: no VLPI support, no direct LPI support
[    0.000000] GICv3: CPU0: found redistributor 0 region 0:0x0000000017a60000
[    0.000000] ITS: No ITS available, not enabling LPIs
[    0.000000] random: get_random_bytes called from start_kernel+0x2f8/0x48c with crng_init=0
[    0.000000] arch_timer: cp15 and mmio timer(s) running at 19.20MHz (virt/virt).
[    0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
[    0.000004] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
[    0.137000] Console: colour dummy device 80x25
[    0.273610] printk: console [tty0] enabled
[    0.410207] printk: bootconsole [efifb0] disabled
[    0.546910] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
[    0.546924] pid_max: default: 32768 minimum: 301
[    0.547000] LSM: Security Framework initializing
[    0.547065] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.547088] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    0.548432] ASID allocator initialised with 32768 entries
[    0.548499] rcu: Hierarchical SRCU implementation.
[    0.550722] Remapping and enabling EFI services.
[    0.551316] smp: Bringing up secondary CPUs ...
[    0.552852] Detected VIPT I-cache on CPU1
[    0.552893] GICv3: CPU1: found redistributor 100 region 0:0x0000000017a80000
[    0.552953] CPU1: Booted secondary processor 0x0000000100 [0x517f803c]
[    0.554440] Detected VIPT I-cache on CPU2
[    0.554465] GICv3: CPU2: found redistributor 200 region 0:0x0000000017aa0000
[    0.554509] CPU2: Booted secondary processor 0x0000000200 [0x517f803c]
[    0.556110] Detected VIPT I-cache on CPU3
[    0.556134] GICv3: CPU3: found redistributor 300 region 0:0x0000000017ac0000
[    0.556175] CPU3: Booted secondary processor 0x0000000300 [0x517f803c]
[    0.558398] Detected VIPT I-cache on CPU4
[    0.558425] GICv3: CPU4: found redistributor 400 region 0:0x0000000017ae0000
[    0.558467] CPU4: Booted secondary processor 0x0000000400 [0x516f802d]
[    0.560436] Detected VIPT I-cache on CPU5
[    0.560464] GICv3: CPU5: found redistributor 500 region 0:0x0000000017b00000
[    0.560506] CPU5: Booted secondary processor 0x0000000500 [0x516f802d]
[    0.562632] Detected VIPT I-cache on CPU6
[    0.562661] GICv3: CPU6: found redistributor 600 region 0:0x0000000017b20000
[    0.562703] CPU6: Booted secondary processor 0x0000000600 [0x516f802d]
[    0.565024] Detected VIPT I-cache on CPU7
[    0.565055] GICv3: CPU7: found redistributor 700 region 0:0x0000000017b40000
[    0.565097] CPU7: Booted secondary processor 0x0000000700 [0x516f802d]
[    0.565181] smp: Brought up 1 node, 8 CPUs
[    0.565290] SMP: Total of 8 processors activated.
[    0.565298] CPU features: detected: Privileged Access Never
[    0.565305] CPU features: detected: LSE atomic instructions
[    0.565312] CPU features: detected: User Access Override
[    0.565319] CPU features: detected: 32-bit EL0 Support
[    0.565328] CPU features: detected: Common not Private translations
[    0.565336] CPU features: detected: RAS Extension Support
[    0.565344] CPU features: detected: Data cache clean to the PoU not required for I/D coherence
[    0.565353] CPU features: detected: CRC32 instructions
[    0.566660] CPU: All CPU(s) started at EL1
[    0.566708] alternatives: patching kernel code
[    0.573077] devtmpfs: initialized
[    0.581109] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
[    0.581130] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.581954] pinctrl core: initialized pinctrl subsystem
[    0.583249] SMBIOS 3.0 present.
[    0.583271] DMI: LENOVO 81JL/LNVNB161216, BIOS 9UCN33WW(V2.06) 06/ 4/2019
[    0.583694] NET: Registered protocol family 16
[    0.584233] audit: initializing netlink subsys (disabled)
[    0.584353] audit: type=2000 audit(0.048:1): state=initialized audit_enabled=0 res=1
[    0.585584] cpuidle: using governor menu
[    0.585968] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
[    0.586772] DMA: preallocated 256 KiB pool for atomic allocations
[    0.588002] Serial: AMBA PL011 UART driver
[    0.612795] HugeTLB registered 1.00 GiB page size, pre-allocated 0 pages
[    0.612822] HugeTLB registered 32.0 MiB page size, pre-allocated 0 pages
[    0.612832] HugeTLB registered 2.00 MiB page size, pre-allocated 0 pages
[    0.612843] HugeTLB registered 64.0 KiB page size, pre-allocated 0 pages
[    0.614693] cryptd: max_cpu_qlen set to 1000
[    0.618520] ACPI: Interpreter disabled.
[    0.634258] vgaarb: loaded
[    0.634555] SCSI subsystem initialized
[    0.634800] libata version 3.00 loaded.
[    0.635054] usbcore: registered new interface driver usbfs
[    0.635098] usbcore: registered new interface driver hub
[    0.635164] usbcore: registered new device driver usb
[    0.635733] pps_core: LinuxPPS API ver. 1 registered
[    0.635743] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
[    0.635768] PTP clock support registered
[    0.635893] EDAC MC: Ver: 3.0.0
[    0.636402] Registered efivars operations
[    0.636449] efivars: get_next_variable: status=8000000000000003
[    0.637123] Advanced Linux Sound Architecture Driver Initialized.
[    0.637502] Bluetooth: Core ver 2.22
[    0.637536] NET: Registered protocol family 31
[    0.637544] Bluetooth: HCI device and connection manager initialized
[    0.637559] Bluetooth: HCI socket layer initialized
[    0.637569] Bluetooth: L2CAP socket layer initialized
[    0.637587] Bluetooth: SCO socket layer initialized
[    0.638078] clocksource: Switched to clocksource arch_sys_counter
[    0.638259] VFS: Disk quotas dquot_6.6.0
[    0.638322] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.638497] pnp: PnP ACPI: disabled
[    0.643637] thermal_sys: Registered thermal governor 'step_wise'
[    0.643641] thermal_sys: Registered thermal governor 'power_allocator'
[    0.645678] NET: Registered protocol family 2
[    0.646029] tcp_listen_portaddr_hash hash table entries: 4096 (order: 5, 163840 bytes, linear)
[    0.646156] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear)
[    0.646501] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear)
[    0.647426] TCP: Hash tables configured (established 65536 bind 65536)
[    0.647550] UDP hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    0.647742] UDP-Lite hash table entries: 4096 (order: 6, 393216 bytes, linear)
[    0.648075] NET: Registered protocol family 1
[    0.648482] RPC: Registered named UNIX socket transport module.
[    0.648498] RPC: Registered udp transport module.
[    0.648506] RPC: Registered tcp transport module.
[    0.648513] RPC: Registered tcp NFSv4.1 backchannel transport module.
[    0.648531] PCI: CLS 0 bytes, default 64
[    0.648675] Unpacking initramfs...
[    1.019453] Freeing initrd memory: 10092K
[    1.020648] hw perfevents: enabled with armv8_pmuv3 PMU driver, 7 counters available
[    1.020884] kvm [1]: HYP mode not available
[    1.070905] Initialise system trusted keyrings
[    1.071023] workingset: timestamp_bits=44 max_order=21 bucket_order=0
[    1.075709] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    1.076212] NFS: Registering the id_resolver key type
[    1.076235] Key type id_resolver registered
[    1.076243] Key type id_legacy registered
[    1.076258] nfs4filelayout_init: NFSv4 File Layout Driver Registering...
[    1.076407] 9p: Installing v9fs 9p2000 file system support
[    1.091360] Key type asymmetric registered
[    1.091374] Asymmetric key parser 'x509' registered
[    1.091413] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 245)
[    1.091425] io scheduler mq-deadline registered
[    1.091433] io scheduler kyber registered
[    1.099930] EINJ: ACPI disabled.
[    3.166207] smps2: supplied by vph_pwr
[    3.166403] smps3: supplied by vph_pwr
[    3.166433] smps3: Setting 1352000-1352000uV
[    3.166646] smps4: supplied by vph_pwr
[    3.166676] smps4: Setting 1800000-1800000uV
[    3.166861] smps5: supplied by vph_pwr
[    3.166891] smps5: Setting 2040000-2040000uV
[    3.167074] smps7: supplied by vph_pwr
[    3.167112] smps7: Setting 1028000-1028000uV
[    3.167301] ldo1: supplied by smps7
[    3.167329] ldo1: Setting 880000-880000uV
[    3.167655] ldo2: supplied by smps3
[    3.167683] ldo2: Setting 1200000-1200000uV
[    3.168006] ldo3: supplied by smps7
[    3.168142] ldo5: supplied by smps7
[    3.168170] ldo5: Setting 800000-800000uV
[    3.168319] ldo6: supplied by vph_pwr
[    3.168357] ldo6: Setting 1800000-1800000uV
[    3.168505] ldo7: supplied by smps5
[    3.168533] ldo7: Setting 1800000-1800000uV
[    3.168677] ldo8: supplied by smps3
[    3.168835] ldo9: supplied by regulator-dummy
[    3.168986] ldo10: supplied by regulator-dummy
[    3.169111] ldo11: supplied by smps7
[    3.169239] ldo12: supplied by smps5
[    3.169266] ldo12: Setting 1800000-1800000uV
[    3.169445] ldo13: supplied by regulator-dummy
[    3.169571] ldo14: supplied by smps5
[    3.169610] ldo14: Setting 1880000-1880000uV
[    3.169997] ldo15: supplied by smps5
[    3.170161] ldo16: supplied by regulator-dummy
[    3.170296] ldo17: supplied by smps3
[    3.170323] ldo17: Setting 1304000-1304000uV
[    3.170503] ldo18: supplied by regulator-dummy
[    3.170654] ldo19: supplied by regulator-dummy
[    3.170694] ldo19: Setting 3100000-3108000uV
[    3.170879] ldo20: supplied by regulator-dummy
[    3.170910] ldo20: Setting 2960000-2960000uV
[    3.171090] ldo21: supplied by regulator-dummy
[    3.171245] ldo22: supplied by regulator-dummy
[    3.171398] ldo23: supplied by regulator-dummy
[    3.171551] ldo24: supplied by regulator-dummy
[    3.171589] ldo24: Setting 3075000-3083000uV
[    3.171773] ldo25: supplied by regulator-dummy
[    3.171804] ldo25: Setting 3104000-3112000uV
[    3.171968] ldo26: supplied by smps3
[    3.171996] ldo26: Setting 1200000-1208000uV
[    3.172277] ldo28: supplied by regulator-dummy
[    3.172405] lvs1: supplied by smps4
[    3.172532] lvs2: supplied by smps4
[    3.176173] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    3.177973] SuperH (H)SCI(F) driver initialized
[    3.178359] msm_serial: driver initialized
[    3.178682] 898000.serial: ttyHS0 at MMIO 0x898000 (irq = 124, base_baud = 0) is a MSM
[    3.178884] serial serial0: tty port ttyHS0 registered
[    3.179380] arm-smmu 5040000.iommu: probing hardware configuration...
[    3.179393] arm-smmu 5040000.iommu: SMMUv2 with:
[    3.179431] arm-smmu 5040000.iommu: 	stage 1 translation
[    3.179443] arm-smmu 5040000.iommu: 	address translation ops
[    3.179454] arm-smmu 5040000.iommu: 	non-coherent table walk
[    3.179464] arm-smmu 5040000.iommu: 	(IDR0.CTTW overridden by FW configuration)
[    3.179477] arm-smmu 5040000.iommu: 	stream matching with 5 register groups
[    3.179504] arm-smmu 5040000.iommu: 	5 context banks (0 stage-2 only)
[    3.179531] arm-smmu 5040000.iommu: 	Supported page sizes: 0x63315000
[    3.179543] arm-smmu 5040000.iommu: 	Stage-1: 48-bit VA -> 36-bit IPA
[    3.180143] arm-smmu 15000000.iommu: option qcom,smmu-500-fw-impl-errata
[    3.180574] arm-smmu 15000000.iommu: probing hardware configuration...
[    3.180586] arm-smmu 15000000.iommu: SMMUv2 with:
[    3.180608] arm-smmu 15000000.iommu: 	stage 1 translation
[    3.180620] arm-smmu 15000000.iommu: 	non-coherent table walk
[    3.180630] arm-smmu 15000000.iommu: 	(IDR0.CTTW overridden by FW configuration)
[    3.180643] arm-smmu 15000000.iommu: 	stream matching with 76 register groups
[    3.180670] arm-smmu 15000000.iommu: 	45 context banks (0 stage-2 only)
[    3.180691] arm-smmu 15000000.iommu: 	Supported page sizes: 0x61311000
[    3.180704] arm-smmu 15000000.iommu: 	Stage-1: 48-bit VA -> 48-bit IPA
[    3.180728] arm-smmu 15000000.iommu: Handoff smr: 80080880 s2cr: 0 cb: 0
[    3.180752] arm-smmu 15000000.iommu: Handoff smr: 80080c80 s2cr: 0 cb: 0
[    3.180777] arm-smmu 15000000.iommu: Handoff smr: 800f00a0 s2cr: 1 cb: 1
[    3.180801] arm-smmu 15000000.iommu: Handoff smr: 800f00c0 s2cr: 1 cb: 1
[    3.180826] arm-smmu 15000000.iommu: Handoff smr: 800f00e0 s2cr: 2 cb: 2
[    3.180851] arm-smmu 15000000.iommu: Handoff smr: 800f0100 s2cr: 2 cb: 2
[    3.180875] arm-smmu 15000000.iommu: Handoff smr: 80000740 s2cr: 3 cb: 3
[    3.180900] arm-smmu 15000000.iommu: Handoff smr: 80000760 s2cr: 3 cb: 3
[    3.190948] loop: module loaded
[    3.191927] ufshcd-qcom 1d84000.ufshc: Adding to iommu group 0
[    3.192303] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[    3.192329] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[    3.192344] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[    3.192678] ufshcd-qcom 1d84000.ufshc: ufs_qcom_init: required phy device. hasn't probed yet. err = -517
[    3.192695] ufshcd-qcom 1d84000.ufshc: ufshcd_variant_hba_init: variant qcom init failed err -517
[    3.192774] ufshcd-qcom 1d84000.ufshc: Initialization failed
[    3.242168] ufshcd-qcom 1d84000.ufshc: ufshcd_pltfrm_init() failed -517
[    3.244737] spmi spmi-0: PMIC arbiter version v5 (0x50000000)
[    3.252991] libphy: Fixed MDIO Bus: probed
[    3.253299] tun: Universal TUN/TAP device driver, 1.6
[    3.254127] thunder_xcv, ver 1.0
[    3.254163] thunder_bgx, ver 1.0
[    3.254199] nicpf, ver 1.0
[    3.254616] hclge is initializing
[    3.254626] hns3: Hisilicon Ethernet Network Driver for Hip08 Family - version
[    3.254635] hns3: Copyright (c) 2017 Huawei Corporation.
[    3.254687] e1000e: Intel(R) PRO/1000 Network Driver - 3.2.6-k
[    3.254694] e1000e: Copyright(c) 1999 - 2015 Intel Corporation.
[    3.254730] igb: Intel(R) Gigabit Ethernet Network Driver - version 5.6.0-k
[    3.254739] igb: Copyright (c) 2007-2014 Intel Corporation.
[    3.254771] igbvf: Intel(R) Gigabit Virtual Function Network Driver - version 2.4.0-k
[    3.254781] igbvf: Copyright (c) 2009 - 2012 Intel Corporation.
[    3.255098] sky2: driver version 1.30
[    3.255650] usbcore: registered new interface driver ax88179_178a
[    3.255837] VFIO - User Level meta-driver version: 0.3
[    3.259338] dwc3 a600000.dwc3: Adding to iommu group 1
[    3.259508] dwc3 a600000.dwc3: Failed to get clk 'ref': -2
[    3.262344] dwc3 a800000.dwc3: Adding to iommu group 2
[    3.262499] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
[    3.263328] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    3.263340] ehci-pci: EHCI PCI platform driver
[    3.263372] ehci-platform: EHCI generic platform driver
[    3.263490] ehci-orion: EHCI orion driver
[    3.263581] ehci-exynos: EHCI EXYNOS driver
[    3.263664] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    3.263699] ohci-pci: OHCI PCI platform driver
[    3.263733] ohci-platform: OHCI generic platform driver
[    3.263839] ohci-exynos: OHCI EXYNOS driver
[    3.264265] usbcore: registered new interface driver usb-storage
[    3.266952] i2c /dev entries driver
[    3.272725] Bluetooth: HCI UART driver ver 2.3
[    3.272743] Bluetooth: HCI UART protocol H4 registered
[    3.272781] Bluetooth: HCI UART protocol LL registered
[    3.272857] Bluetooth: HCI UART protocol Broadcom registered
[    3.272894] Bluetooth: HCI UART protocol QCA registered
[    3.273892] ldo25: unsupportable voltage range: 3300000-3112000uV
[    3.273908] Bluetooth: failed to enable regulator:vddch0
[    3.274209] Bluetooth: wcn3990 serdev registration failed
[    3.274342] hci_uart_qca: probe of serial0-0 failed with error -22
[    3.277643] sdhci: Secure Digital Host Controller Interface driver
[    3.277656] sdhci: Copyright(c) Pierre Ossman
[    3.278025] Synopsys Designware Multimedia Card Interface Driver
[    3.278844] sdhci-pltfm: SDHCI platform and OF driver helper
[    3.281154] ledtrig-cpu: registered to indicate activity on CPUs
[    3.281583] hidraw: raw HID events driver (C) Jiri Kosina
[    3.281766] usbcore: registered new interface driver usbhid
[    3.281769] usbhid: USB HID core driver
[    3.283635] NET: Registered protocol family 17
[    3.283724] 9pnet: Installing 9P2000 support
[    3.283755] Key type dns_resolver registered
[    3.284436] registered taskstats version 1
[    3.284442] Loading compiled-in X.509 certificates
[    3.288619] SW_EDP_1P2: supplied by ldo2
[    3.289186] qcom-qmp-phy 1d87000.phy: Registered Qcom-QMP phy
[    3.289519] qcom-qmp-phy 88e9000.phy: Registered Qcom-QMP phy
[    3.289761] qcom-qmp-phy 88eb000.phy: Registered Qcom-QMP phy
[    3.289935] qcom-qusb2-phy 88e2000.phy: Registered Qcom-QUSB2 phy
[    3.290106] qcom-qusb2-phy 88e3000.phy: Registered Qcom-QUSB2 phy
[    3.291554] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vdd-hba-supply regulator, assuming enabled
[    3.291566] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq-supply regulator, assuming enabled
[    3.291573] ufshcd-qcom 1d84000.ufshc: ufshcd_populate_vreg: Unable to find vccq2-supply regulator, assuming enabled
[    3.292561] scsi host0: ufshcd
[    3.312050] dwc3 a600000.dwc3: Failed to get clk 'ref': -2
[    3.315175] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.315200] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1
[    3.315378] xhci-hcd xhci-hcd.0.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000000002010010
[    3.315434] xhci-hcd xhci-hcd.0.auto: irq 130, io mem 0x0a600000
[    3.316691] hub 1-0:1.0: USB hub found
[    3.316721] hub 1-0:1.0: 1 port detected
[    3.316922] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller
[    3.316938] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 2
[    3.316956] xhci-hcd xhci-hcd.0.auto: Host supports USB 3.0 SuperSpeed
[    3.317014] usb usb2: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.317611] hub 2-0:1.0: USB hub found
[    3.317639] hub 2-0:1.0: 1 port detected
[    3.318437] dwc3 a800000.dwc3: Failed to get clk 'ref': -2
[    3.320214] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    3.320228] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 3
[    3.320352] xhci-hcd xhci-hcd.1.auto: hcc params 0x0230fe65 hci version 0x110 quirks 0x0000000002010010
[    3.320392] xhci-hcd xhci-hcd.1.auto: irq 131, io mem 0x0a800000
[    3.320855] hub 3-0:1.0: USB hub found
[    3.320870] hub 3-0:1.0: 1 port detected
[    3.320964] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller
[    3.320974] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 4
[    3.320983] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed
[    3.321009] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    3.321169] hub 4-0:1.0: USB hub found
[    3.321180] hub 4-0:1.0: 1 port detected
[    3.321349] PM: genpd: Not disabling unused power domains
[    3.322096] hctosys: unable to open rtc device (rtc0)
[    3.322371] clk: Not disabling unused clocks
[    3.322428] ALSA device list:
[    3.322432]   No soundcards found.
[    3.333903] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[1, 1], lane[1, 1], pwr[SLOWAUTO_MODE, SLOWAUTO_MODE], rate = 0
[    3.438070] ufshcd-qcom 1d84000.ufshc: ufshcd_print_pwr_info:[RX, TX]: gear=[3, 3], lane[2, 2], pwr[FAST MODE, FAST MODE], rate = 2
[    3.439007] ufshcd-qcom 1d84000.ufshc: ufshcd_find_max_sup_active_icc_level: Regulator capability was not set, actvIccLevel=0
[    3.440749] scsi 0:0:0:49488: Well-known LUN    SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[    3.444247] scsi 0:0:0:49476: Well-known LUN    SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[    3.446624] scsi 0:0:0:49456: Well-known LUN    SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[    3.449987] scsi 0:0:0:0: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[    3.452678] sd 0:0:0:0: Power-on or device reset occurred
[    3.453968] scsi 0:0:0:1: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[    3.456144] sd 0:0:0:1: Power-on or device reset occurred
[    3.456340] sd 0:0:0:0: [sda] 29765632 4096-byte logical blocks: (122 GB/114 GiB)
[    3.456722] sd 0:0:0:0: [sda] Write Protect is off
[    3.456756] sd 0:0:0:0: [sda] Mode Sense: 00 32 00 10
[    3.456857] scsi 0:0:0:2: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[    3.457072] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    3.457240] sd 0:0:0:0: [sda] Optimal transfer size 8192 bytes
[    3.459229] sd 0:0:0:2: Power-on or device reset occurred
[    3.460014] sd 0:0:0:1: [sdb] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[    3.460160] scsi 0:0:0:3: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[    3.460471] sd 0:0:0:1: [sdb] Write Protect is off
[    3.460483] sd 0:0:0:1: [sdb] Mode Sense: 00 32 00 10
[    3.460681] sd 0:0:0:2: [sdc] 1024 4096-byte logical blocks: (4.19 MB/4.00 MiB)
[    3.460797] sd 0:0:0:2: [sdc] Write Protect is off
[    3.460814] sd 0:0:0:2: [sdc] Mode Sense: 00 32 00 10
[    3.460985] sd 0:0:0:2: [sdc] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    3.461015] sd 0:0:0:1: [sdb] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    3.461113] sd 0:0:0:2: [sdc] Optimal transfer size 8192 bytes
[    3.461309] sd 0:0:0:3: Power-on or device reset occurred
[    3.461442] sd 0:0:0:1: [sdb] Optimal transfer size 8192 bytes
[    3.461927] scsi 0:0:0:4: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[    3.462792] sd 0:0:0:4: Power-on or device reset occurred
[    3.463320] scsi 0:0:0:5: Direct-Access     SAMSUNG  KLUDG4U1EA-B0C1  0500 PQ: 0 ANSI: 6
[    3.463519] sd 0:0:0:3: [sdd] 32768 4096-byte logical blocks: (134 MB/128 MiB)
[    3.463676] sd 0:0:0:3: [sdd] Write Protect is off
[    3.463685] sd 0:0:0:3: [sdd] Mode Sense: 00 32 00 10
[    3.463752]  sda: sda1 sda2 sda3 sda4 sda5
[    3.463857] sd 0:0:0:3: [sdd] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    3.463966] sd 0:0:0:3: [sdd] Optimal transfer size 8192 bytes
[    3.464099] sd 0:0:0:4: [sde] 1048576 4096-byte logical blocks: (4.29 GB/4.00 GiB)
[    3.464203] sd 0:0:0:4: [sde] Write Protect is off
[    3.464220] sd 0:0:0:4: [sde] Mode Sense: 00 32 00 10
[    3.464370] sd 0:0:0:5: Power-on or device reset occurred
[    3.464549] sd 0:0:0:4: [sde] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    3.465030] sd 0:0:0:4: [sde] Optimal transfer size 8192 bytes
[    3.465658]  sdc: sdc1 sdc2
[    3.466129] sd 0:0:0:5: [sdf] 393216 4096-byte logical blocks: (1.61 GB/1.50 GiB)
[    3.466287] sd 0:0:0:5: [sdf] Write Protect is off
[    3.466296] sd 0:0:0:5: [sdf] Mode Sense: 00 32 00 10
[    3.466857] sd 0:0:0:5: [sdf] Write cache: enabled, read cache: enabled, supports DPO and FUA
[    3.466924]  sdb: sdb1 sdb2
[    3.467049] sd 0:0:0:5: [sdf] Optimal transfer size 8192 bytes
[    3.467380]  sdd: sdd2 sdd3
[    3.467641] sd 0:0:0:0: [sda] Attached SCSI disk
[    3.468378]  sde: sde1 sde2 sde3 sde4 sde5 sde6 sde7 sde8 sde9 sde10 sde11 sde12 sde13 sde14 sde15 sde16 sde17 sde18 sde19 sde20 sde21 sde22 sde23 sde24 sde25 sde26 sde27
[    3.468456] random: fast init done
[    3.468780] sd 0:0:0:2: [sdc] Attached SCSI disk
[    3.469329] sd 0:0:0:1: [sdb] Attached SCSI disk
[    3.469813]  sdf: sdf2 sdf3 sdf4 sdf5
[    3.469876] sd 0:0:0:3: [sdd] Attached SCSI disk
[    3.471685] sd 0:0:0:5: [sdf] Attached SCSI disk
[    3.472968] sd 0:0:0:4: [sde] Attached SCSI disk
[    3.473929] Freeing unused kernel memory: 4992K
[    3.495049] Run /init as init process
[    3.650698] usb 1-1: new high-speed USB device number 2 using xhci-hcd
[    3.654303] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    3.817108] systemd-udevd[2038]: starting version 3.2.7
[    3.817444] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.817490] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.817530] random: systemd-udevd: uninitialized urandom read (16 bytes read)
[    3.819882] udevd[2040]: starting eudev-3.2.7
[    3.861690] hub 1-1:1.0: USB hub found
[    3.862890] hub 1-1:1.0: 4 ports detected
[    3.865629] hub 3-1:1.0: USB hub found
[    3.865958] hub 3-1:1.0: 3 ports detected
[    3.930269] usb 4-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    3.934644] usb 2-1: new SuperSpeed Gen 1 USB device number 2 using xhci-hcd
[    3.954657] adreno 5000000.gpu: Adding to iommu group 3
[    3.954978] msm ae00000.mdss: Adding to iommu group 4
[    3.957913] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[    3.958001] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[    3.958227] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[    3.959338] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
[    3.959449] msm ae00000.mdss: master bind failed: -517
[    3.961162] power_supply some-adapter: hwmon: 'some-adapter' is not a valid name attribute, please fix
[    3.961310] power_supply some-battery: hwmon: 'some-battery' is not a valid name attribute, please fix
[    3.961920] i2c_hid 3-0015: 3-0015 supply vdd not found, using dummy regulator
[    3.961960] i2c_hid 3-0015: 3-0015 supply vddl not found, using dummy regulator
[    3.962341] i2c_hid 3-002c: 3-002c supply vdd not found, using dummy regulator
[    3.962371] i2c_hid 3-002c: 3-002c supply vddl not found, using dummy regulator
[    3.964354] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[    3.964436] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[    3.964573] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[    3.964621] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
[    3.964672] msm ae00000.mdss: master bind failed: -517
[    3.967881] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[    3.967964] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[    3.968101] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[    3.968149] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
[    3.968199] msm ae00000.mdss: master bind failed: -517
[    3.971413] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[    3.971500] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[    3.971654] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[    3.971705] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
[    3.971768] msm ae00000.mdss: master bind failed: -517
[    3.975129] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[    3.975217] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[    3.975362] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[    3.975410] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
[    3.975457] msm ae00000.mdss: master bind failed: -517
[    3.978307] hub 4-1:1.0: USB hub found
[    3.978666] hub 4-1:1.0: 2 ports detected
[    3.978897] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[    3.978972] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[    3.979105] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[    3.979154] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
[    3.979203] msm ae00000.mdss: master bind failed: -517
[    3.982414] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[    3.982500] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[    3.982648] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[    3.982697] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
[    3.982745] msm ae00000.mdss: master bind failed: -517
[    3.985734] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[    3.985817] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[    3.985962] msm_dsi_manager_register: failed to register mipi dsi host for DSI 0
[    3.986011] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -517
[    3.986082] msm ae00000.mdss: master bind failed: -517
[    3.986335] input: hid-over-i2c 06CB:CD3E Mouse as /devices/platform/soc/8c0000.geniqup/88c000.i2c/i2c-3/3-002c/0018:06CB:CD3E.0001/input/input0
[    3.986581] input: hid-over-i2c 06CB:CD3E Touchpad as /devices/platform/soc/8c0000.geniqup/88c000.i2c/i2c-3/3-002c/0018:06CB:CD3E.0001/input/input1
[    3.986749] hid-generic 0018:06CB:CD3E.0001: input,hidraw0: I2C HID v1.00 Mouse [hid-over-i2c 06CB:CD3E] on 3-002c
[    3.987370] i2c_hid 5-0010: 5-0010 supply vdd not found, using dummy regulator
[    3.987404] i2c_hid 5-0010: 5-0010 supply vddl not found, using dummy regulator
[    3.988946] msm ae00000.mdss: bound ae01000.mdp (ops dpu_ops [msm])
[    3.989027] msm_dsi ae94000.dsi: ae94000.dsi supply gdsc not found, using dummy regulator
[    3.989156] dsi_get_config: Invalid version
[    3.989181] msm_dsi_host_init: get config failed
[    3.989215] msm ae00000.mdss: failed to bind ae94000.dsi (ops dsi_ops [msm]): -22
[    3.989264] msm ae00000.mdss: master bind failed: -22
[    3.989928] msm: probe of ae00000.mdss failed with error -22
[    4.008802] hub 2-1:1.0: USB hub found
[    4.011425] hub 2-1:1.0: 4 ports detected
[    4.014760] power_supply hid-0018:04F3:279F.0002-battery: hwmon: 'hid-0018:04F3:279F.0002-battery' is not a valid name attribute, please fix
[    4.014927] input: hid-over-i2c 04F3:279F Touchscreen as /devices/platform/soc/8c0000.geniqup/894000.i2c/i2c-5/5-0010/0018:04F3:279F.0002/input/input3
[    4.015087] input: hid-over-i2c 04F3:279F as /devices/platform/soc/8c0000.geniqup/894000.i2c/i2c-5/5-0010/0018:04F3:279F.0002/input/input4
[    4.015209] input: hid-over-i2c 04F3:279F as /devices/platform/soc/8c0000.geniqup/894000.i2c/i2c-5/5-0010/0018:04F3:279F.0002/input/input5
[    4.015839] input: hid-over-i2c 04F3:279F as /devices/platform/soc/8c0000.geniqup/894000.i2c/i2c-5/5-0010/0018:04F3:279F.0002/input/input6
[    4.015995] hid-generic 0018:04F3:279F.0002: input,hidraw1: I2C HID v1.00 Device [hid-over-i2c 04F3:279F] on 5-0010
[    4.017232] i2c_hid 11-005c: 11-005c supply vdd not found, using dummy regulator
[    4.017280] i2c_hid 11-005c: 11-005c supply vddl not found, using dummy regulator
[    4.070565] input: hid-over-i2c 6243:0001 Keyboard as /devices/platform/soc/ac0000.geniqup/a8c000.i2c/i2c-11/11-005c/0018:6243:0001.0003/input/input9
[    4.071362] input: hid-over-i2c 6243:0001 Consumer Control as /devices/platform/soc/ac0000.geniqup/a8c000.i2c/i2c-11/11-005c/0018:6243:0001.0003/input/input10
[    4.071849] input: hid-over-i2c 6243:0001 Wireless Radio Control as /devices/platform/soc/ac0000.geniqup/a8c000.i2c/i2c-11/11-005c/0018:6243:0001.0003/input/input12
[    4.071990] input: hid-over-i2c 6243:0001 as /devices/platform/soc/ac0000.geniqup/a8c000.i2c/i2c-11/11-005c/0018:6243:0001.0003/input/input13
[    4.072500] hid-generic 0018:6243:0001.0003: input,hidraw2: I2C HID v1.00 Keyboard [hid-over-i2c 6243:0001] on 11-005c
[    4.142771] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.218397] usb 1-1.1: new full-speed USB device number 3 using xhci-hcd
[    4.239513] dracut: Checking ext4: /dev/disk/by-partuuid/637cbe98-d2db-4ae4-b513-022b30fdcd8f
[    4.239925] dracut: issuing e2fsck -a  /dev/disk/by-partuuid/637cbe98-d2db-4ae4-b513-022b30fdcd8f
[    4.253944] dracut: Linux: clean, 203154/5120000 files, 4272828/20480000 blocks
[    4.254099] usb 3-1.3: new high-speed USB device number 3 using xhci-hcd
[    4.259293] dracut: Mounting /dev/disk/by-partuuid/637cbe98-d2db-4ae4-b513-022b30fdcd8f with -o defaults,ro,rw
[    4.270110] EXT4-fs (sda5): mounted filesystem with ordered data mode. Opts: (null)
[    4.296104] dracut: Mounted root filesystem /dev/sda5
[    4.329870] usb 1-1.1: not running at top speed; connect to a high speed hub
[    4.410750] usb 2-1.3: new SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[    4.425545] dracut: Switching root
[    4.514136] usb 1-1.2: new full-speed USB device number 4 using xhci-hcd
[    4.637096] fuse: init (API version 7.31)
[    4.718510] raid6: neonx8   gen()  6288 MB/s
[    4.725736] usb 2-1.4: new SuperSpeed Gen 1 USB device number 4 using xhci-hcd
[    4.729747] input: C-Media Electronics Inc. USB Advanced Audio Device as /devices/platform/soc/a6f8800.usb/a600000.dwc3/xhci-hcd.0.auto/usb1/1-1/1-1.2/1-1.2:1.3/0003:0D8C:0022.0004/input/input14
[    4.786624] raid6: neonx8   xor()  5436 MB/s
[    4.791382] hid-generic 0003:0D8C:0022.0004: input,hidraw3: USB HID v1.11 Device [C-Media Electronics Inc. USB Advanced Audio Device] on usb-xhci-hcd.0.auto-1.2/input3
[    4.793328] hub 2-1.4:1.0: USB hub found
[    4.795936] hub 2-1.4:1.0: 4 ports detected
[    4.854271] raid6: neonx4   gen()  5989 MB/s
[    4.870594] usb 1-1.4: new high-speed USB device number 5 using xhci-hcd
[    4.922255] raid6: neonx4   xor()  5413 MB/s
[    4.990262] raid6: neonx2   gen()  4709 MB/s
[    5.046445] hub 1-1.4:1.0: USB hub found
[    5.048473] hub 1-1.4:1.0: 4 ports detected
[    5.058530] raid6: neonx2   xor()  4318 MB/s
[    5.126529] raid6: neonx1   gen()  3237 MB/s
[    5.194587] raid6: neonx1   xor()  3069 MB/s
[    5.262496] raid6: int64x8  gen()  2924 MB/s
[    5.330491] raid6: int64x8  xor()  1612 MB/s
[    5.398556] raid6: int64x4  gen()  2986 MB/s
[    5.466562] raid6: int64x4  xor()  1582 MB/s
[    5.534485] raid6: int64x2  gen()  2507 MB/s
[    5.602490] raid6: int64x2  xor()  1329 MB/s
[    5.670541] raid6: int64x1  gen()  2109 MB/s
[    5.738558] raid6: int64x1  xor()  1090 MB/s
[    5.738561] raid6: using algorithm neonx8 gen() 6288 MB/s
[    5.738564] raid6: .... xor() 5436 MB/s, rmw enabled
[    5.738569] raid6: using neon recovery algorithm
[    5.749054] xor: measuring software checksum speed
[    5.786554]    8regs     :  9136.000 MB/sec
[    5.826508]    32regs    :  8062.000 MB/sec
[    5.866516]    arm64_neon:  7293.000 MB/sec
[    5.866520] xor: using function: 8regs (9136.000 MB/sec)
[    5.895362] Btrfs loaded, crc32c=crc32c-generic
[    5.903602] device-mapper: ioctl: 4.40.0-ioctl (2019-01-18) initialised: dm-devel@redhat.com
[    5.928395] udevd[3736]: starting version 3.2.7
[    5.930143] urandom_read: 5 callbacks suppressed
[    5.930146] random: udevd: uninitialized urandom read (16 bytes read)
[    5.930379] random: udevd: uninitialized urandom read (16 bytes read)
[    5.949516] udevd[3737]: starting eudev-3.2.7
[    6.014587] random: crng init done
[    6.027598] qcom_q6v5_pas remoteproc-adsp: remoteproc-adsp supply cx not found, using dummy regulator
[    6.027655] qcom_q6v5_pas remoteproc-adsp: remoteproc-adsp supply px not found, using dummy regulator
[    6.028320] qcom-q6v5-mss 4080000.remoteproc: failed to acquire pdc reset
[    6.028539] remoteproc remoteproc1: releasing 4080000.remoteproc
[    6.029342] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[    6.033690] NET: Registered protocol family 42
[    6.034150] remoteproc remoteproc0: remoteproc-adsp is available
[    6.034366] qcom_q6v5_pas remoteproc-cdsp: remoteproc-cdsp supply cx not found, using dummy regulator
[    6.034405] qcom_q6v5_pas remoteproc-cdsp: remoteproc-cdsp supply px not found, using dummy regulator
[    6.035450] qcom-q6v5-mss 4080000.remoteproc: failed to acquire pdc reset
[    6.035547] remoteproc remoteproc2: releasing 4080000.remoteproc
[    6.036210] remoteproc remoteproc1: remoteproc-cdsp is available
[    6.037692] qcom-q6v5-mss 4080000.remoteproc: failed to acquire pdc reset
[    6.037774] remoteproc remoteproc2: releasing 4080000.remoteproc
[    6.037895] remoteproc remoteproc1: Direct firmware load for qcom/c630/cdsp.mdt failed with error -2
[    6.037903] remoteproc remoteproc0: Direct firmware load for qcom/c630/adsp.mdt failed with error -2
[    6.037909] remoteproc remoteproc0: powering up remoteproc-adsp
[    6.037910] remoteproc remoteproc1: powering up remoteproc-cdsp
[    6.037925] remoteproc remoteproc1: Direct firmware load for qcom/c630/cdsp.mdt failed with error -2
[    6.037929] remoteproc remoteproc0: Direct firmware load for qcom/c630/adsp.mdt failed with error -2
[    6.037931] remoteproc remoteproc0: request_firmware failed: -2
[    6.037934] remoteproc remoteproc1: request_firmware failed: -2
[    6.038239] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[    6.038304] platform regulatory.0: Direct firmware load for regulatory.db failed with error -2
[    6.038309] cfg80211: failed to load regulatory.db
[    6.060249] remoteproc remoteproc2: 4080000.remoteproc is available
[    6.075128] ath10k_snoc 18800000.wifi: Adding to iommu group 5
[    6.112680] usbcore: registered new interface driver r8152
[    6.115963] mc: Linux media interface: v0.10
[    6.116050] usbcore: registered new interface driver cdc_ether
[    6.126015] videodev: Linux video capture interface: v2.00
[    6.143150] uvcvideo: Found UVC 1.00 device Integrated Camera (5986:2115)
[    6.161447] uvcvideo 3-1.3:1.0: Entity type for entity Extension 4 was not initialized!
[    6.161467] uvcvideo 3-1.3:1.0: Entity type for entity Extension 3 was not initialized!
[    6.161474] uvcvideo 3-1.3:1.0: Entity type for entity Processing 2 was not initialized!
[    6.161481] uvcvideo 3-1.3:1.0: Entity type for entity Camera 1 was not initialized!
[    6.161644] input: Integrated Camera: Integrated C as /devices/platform/soc/a8f8800.usb/a800000.dwc3/xhci-hcd.1.auto/usb3/3-1/3-1.3/3-1.3:1.0/input/input15
[    6.161822] usbcore: registered new interface driver uvcvideo
[    6.161828] USB Video Class driver (1.1.1)
[    6.245976] usb 2-1.3: reset SuperSpeed Gen 1 USB device number 3 using xhci-hcd
[    6.256028] EXT4-fs (sda5): re-mounted. Opts: stripe=2
[    6.329569] r8152 2-1.3:1.0 eth0: v1.09.10
[    6.525772] EXT4-fs (sda5): re-mounted. Opts: stripe=2
[    7.624151] udevd[5262]: starting version 3.2.7
[    7.634776] udevd[5262]: starting eudev-3.2.7
[    7.663383] 8021q: 802.1Q VLAN Support v1.8
[    7.683084] NET: Registered protocol family 10
[    7.683840] Segment Routing with IPv6
[    9.274195] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[    9.275512] r8152 2-1.3:1.0 eth0: carrier on