Suggestion: Memorize algorithm in junks, i've put brackets around things to make it easier
- Bottom Layer Cross/Edges
- Bottom Layer Corners
- Second Layer Edges
- Top Layer Cross/Edge Orientation
- Top Layer Edge Permutation
- Top Layer Corner Permutation
- Top Layer Corner Orientation
- Put the white face on the top part of the cube
- Find white edges that need to be solved.
- Put them in the bottom layer (on the yellow face)
- Rotate the bottom layer(yellow face) until the edge is on its respective side.
- Rotate that side twice
- If the piece is solved correctly Great! do the next one
- If it is flipped
- Face the cube from the side of the edge that is flipped, in that example, its the blue side
- Algorithm:
- F' U L' U'
- Repeat for all 4 edges
- Finished should look like
-
Find any corner in the bottom face
-
Rotate the bottom face until the corner is under the position it needs to go
-
Should look like one of these
-
Algorithm:
-
R' D' R D (repeat until its solved) Can take up to 5 times
-
If you can't find any corner in the bottom layer it means there are some in the white layer that are wrong. Rotate the cube such that the wrong corner is in the front top right position and do that algorthim once to bring it into the bottom layer
-
Finished should look like
- Flip the cube so the white face is now on the bottom
- Find an edge piece in the top layer without yellow on it. ie Red/Blue
- Rotate the top layer so that the colour lines up with the appropriate centers
- Line up the side colour of the Edge in the U layer with its appropriate side, and rotate the cube so it is the F face.
- There are two possibilities the edge needs to go to the right or to the left. You will know by what the other colour is.
- RIGHT
- Algorithm
- U (R U' R' U') (F' U F)
- LEFT
- Algorithm
- U' (L' U L U) (F U' F')
- If there is an edge piece flipped or trapped in the second layer incorrectly, simply do one of the above algorithms to put a random edge in its place. This will bring it into the top layer
- Repeat for all second layer edges
- Finished state
-
Algorithm
-
(F R U) (R' U' F')
-
3 Cases
-
LINE
-
Position the line left to right and do the algorithm 3 Cases:
-
Line:
-
Arrow/L:
-
Dot:
- Find two adjacent edges that are in the correct spot
- Rotate the cube so the correct edges are at the back and the right
- Algorithm
- (R U R' U) (R U2 R') U
- If their aren't any adjacents correctly positioned, do the algorithm once from anywhere then there will be
-
Find a corner that is in the correct spot. It might be rotated but in the correct spot
-
Put the corner in the front right top spot
-
Repeat the algorithm until all corner are in the correct spot
-
Algorithm
-
U R U' L' U R' U' L
-
If no corners are correct to start, perform the algorithm once from anywhere
-Algorithm -R' D' R D
- Find any corner that isn't oriented correctly. Rotate the top so its in the front right top slot.
- Perform the algorithm. Repeat until correctly oriented
- Rotate the top with U moves until another incorrect piece is in the front right top slot.
- Perform the algorithm repeating until the corner is solved.
- Do this for every incorrectly oriented corner
AND YOURE DONE!