Created
March 28, 2023 18:25
-
-
Save knuxify/308109eb2f653c88861be1bbd60d287f to your computer and use it in GitHub Desktop.
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
[ 0.000000] Booting Linux on physical CPU 0xa00 | |
[ 0.000000] Linux version 6.2.0-postmarketos-exynos4 (pmos@aubrey) (armv7-alpine-linux-musleabihf-gcc (Alpine 12.2.1_git20220924-r9) 12.2.1 20220924, GNU ld (GNU Binutils) 2.40) #34 SMP PREEMPT Mon Mar 27 19:57:02 UTC 2023 | |
[ 0.000000] CPU: ARMv7 Processor [412fc098] revision 8 (ARMv7), cr=10c5387d | |
[ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache | |
[ 0.000000] OF: fdt: Machine model: Samsung Galaxy Tab 3 8.0 WiFi (SM-T310) based on Exynos4212 | |
[ 0.000000] Memory policy: Data cache writealloc | |
[ 0.000000] Reserved memory: created DMA memory pool at 0x7f400000, size 8 MiB | |
[ 0.000000] OF: reserved mem: initialized node region-mfc-right, compatible id shared-dma-pool | |
[ 0.000000] Reserved memory: created DMA memory pool at 0x7d000000, size 36 MiB | |
[ 0.000000] OF: reserved mem: initialized node region-mfc-left, compatible id shared-dma-pool | |
[ 0.000000] cma: Reserved 96 MiB at 0x77000000 | |
[ 0.000000] Samsung CPU ID: 0x43220210 | |
[ 0.000000] Zone ranges: | |
[ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] | |
[ 0.000000] HighMem [mem 0x0000000070000000-0x000000007fbfffff] | |
[ 0.000000] Movable zone start for each node | |
[ 0.000000] Early memory node ranges | |
[ 0.000000] node 0: [mem 0x0000000040000000-0x000000007cffffff] | |
[ 0.000000] node 0: [mem 0x000000007d000000-0x000000007fbfffff] | |
[ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fbfffff] | |
[ 0.000000] Running under secure firmware. | |
[ 0.000000] percpu: Embedded 12 pages/cpu s18132 r8192 d22828 u49152 | |
[ 0.000000] pcpu-alloc: s18132 r8192 d22828 u49152 alloc=12*4096 | |
[ 0.000000] pcpu-alloc: [0] 0 [0] 1 | |
[ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 259392 | |
[ 0.000000] Kernel command line: console=ttySAC2,115200 PMOS_NO_OUTPUT_REDIRECT debug | |
[ 0.000000] Unknown kernel command line parameters "PMOS_NO_OUTPUT_REDIRECT", will be passed to user space. | |
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) | |
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
[ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off | |
[ 0.000000] Memory: 867072K/1044480K available (9216K kernel code, 756K rwdata, 3660K rodata, 1024K init, 339K bss, 79104K reserved, 98304K cma-reserved, 114688K highmem) | |
[ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 | |
[ 0.000000] rcu: Preemptible hierarchical RCU implementation. | |
[ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=2. | |
[ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. | |
[ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=2 | |
[ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 | |
[ 0.000000] L2C: platform modifies aux control register: 0x02070000 -> 0x0a470000 | |
[ 0.000000] L2C: DT/platform modifies aux control register: 0x02070000 -> 0x3a470000 | |
[ 0.000000] L2C-310 erratum 752271 enabled | |
[ 0.000000] L2C-310 enabling early BRESP for Cortex-A9 | |
[ 0.000000] L2C-310 ID prefetch enabled, offset 8 lines | |
[ 0.000000] L2C-310 dynamic clock gating enabled, standby mode enabled | |
[ 0.000000] L2C-310 cache controller enabled, 16 ways, 1024 kB | |
[ 0.000000] L2C-310: CACHE_ID 0x4100c4c7, AUX_CTRL 0x7e470000 | |
[ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. | |
[ 0.000000] Exynos4x12 clocks: sclk_apll = 400000000, sclk_mpll = 800000000 | |
[ 0.000000] sclk_epll = 96000000, sclk_vpll = 108000000, arm_clk = 800000000 | |
[ 0.000000] Switching to timer-based delay loop, resolution 41ns | |
[ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns | |
[ 0.000000] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns | |
[ 0.000442] Console: colour dummy device 80x30 | |
[ 0.000476] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) | |
[ 0.000491] pid_max: default: 32768 minimum: 301 | |
[ 0.000651] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) | |
[ 0.000666] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) | |
[ 0.001461] CPU: Testing write buffer coherency: ok | |
[ 0.001513] CPU0: Spectre v2: using BPIALL workaround | |
[ 0.001746] CPU0: thread -1, cpu 0, socket 10, mpidr 80000a00 | |
[ 0.003139] Setting up static identity map for 0x40100000 - 0x40100060 | |
[ 0.003302] rcu: Hierarchical SRCU implementation. | |
[ 0.003308] rcu: Max phase no-delay instances is 1000. | |
[ 0.004146] smp: Bringing up secondary CPUs ... | |
[ 0.004980] CPU1: thread -1, cpu 1, socket 10, mpidr 80000a01 | |
[ 0.004996] CPU1: Spectre v2: using BPIALL workaround | |
[ 0.005115] smp: Brought up 1 node, 2 CPUs | |
[ 0.005126] SMP: Total of 2 processors activated (96.00 BogoMIPS). | |
[ 0.005135] CPU: All CPU(s) started in SVC mode. | |
[ 0.005718] devtmpfs: initialized | |
[ 0.021407] VFP support v0.3: implementor 41 architecture 3 part 30 variant 9 rev 4 | |
[ 0.021644] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns | |
[ 0.021664] futex hash table entries: 512 (order: 3, 32768 bytes, linear) | |
[ 0.026084] pinctrl core: initialized pinctrl subsystem | |
[ 0.027802] NET: Registered PF_NETLINK/PF_ROUTE protocol family | |
[ 0.030092] DMA: preallocated 256 KiB pool for atomic coherent allocations | |
[ 0.031361] thermal_sys: Registered thermal governor 'step_wise' | |
[ 0.031566] cpuidle: using governor menu | |
[ 0.031791] hw-breakpoint: found 5 (+1 reserved) breakpoint and 1 watchpoint registers. | |
[ 0.031802] hw-breakpoint: maximum watchpoint size is 4 bytes. | |
[ 0.046701] /soc/power-domain@10023c80 has as child subdomain: /soc/power-domain@10023c20. | |
[ 0.052250] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 44 | |
[ 0.082086] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.082457] gpio_stub_drv gpiochip0: (gpa0): added GPIO chardev (254:0) | |
[ 0.082542] gpio_stub_drv gpiochip0: registered GPIOs 0 to 7 on gpa0 | |
[ 0.082566] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.082809] gpio_stub_drv gpiochip1: (gpa1): added GPIO chardev (254:1) | |
[ 0.082891] gpio_stub_drv gpiochip1: registered GPIOs 8 to 13 on gpa1 | |
[ 0.082910] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.083110] gpio_stub_drv gpiochip2: (gpb): added GPIO chardev (254:2) | |
[ 0.083180] gpio_stub_drv gpiochip2: registered GPIOs 14 to 21 on gpb | |
[ 0.083198] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.083392] gpio_stub_drv gpiochip3: (gpc0): added GPIO chardev (254:3) | |
[ 0.083465] gpio_stub_drv gpiochip3: registered GPIOs 22 to 26 on gpc0 | |
[ 0.083484] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.083677] gpio_stub_drv gpiochip4: (gpc1): added GPIO chardev (254:4) | |
[ 0.083745] gpio_stub_drv gpiochip4: registered GPIOs 27 to 31 on gpc1 | |
[ 0.083764] gpio gpiochip5: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.083955] gpio_stub_drv gpiochip5: (gpd0): added GPIO chardev (254:5) | |
[ 0.084024] gpio_stub_drv gpiochip5: registered GPIOs 32 to 35 on gpd0 | |
[ 0.084042] gpio gpiochip6: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.084230] gpio_stub_drv gpiochip6: (gpd1): added GPIO chardev (254:6) | |
[ 0.084304] gpio_stub_drv gpiochip6: registered GPIOs 36 to 39 on gpd1 | |
[ 0.084323] gpio gpiochip7: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.084509] gpio_stub_drv gpiochip7: (gpf0): added GPIO chardev (254:7) | |
[ 0.084582] gpio_stub_drv gpiochip7: registered GPIOs 40 to 47 on gpf0 | |
[ 0.084601] gpio gpiochip8: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.084792] gpio_stub_drv gpiochip8: (gpf1): added GPIO chardev (254:8) | |
[ 0.084866] gpio_stub_drv gpiochip8: registered GPIOs 48 to 55 on gpf1 | |
[ 0.084884] gpio gpiochip9: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.085104] gpio_stub_drv gpiochip9: (gpf2): added GPIO chardev (254:9) | |
[ 0.085175] gpio_stub_drv gpiochip9: registered GPIOs 56 to 63 on gpf2 | |
[ 0.085193] gpio gpiochip10: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.085391] gpio_stub_drv gpiochip10: (gpf3): added GPIO chardev (254:10) | |
[ 0.085461] gpio_stub_drv gpiochip10: registered GPIOs 64 to 69 on gpf3 | |
[ 0.085479] gpio gpiochip11: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.085669] gpio_stub_drv gpiochip11: (gpj0): added GPIO chardev (254:11) | |
[ 0.085744] gpio_stub_drv gpiochip11: registered GPIOs 70 to 77 on gpj0 | |
[ 0.085762] gpio gpiochip12: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.085950] gpio_stub_drv gpiochip12: (gpj1): added GPIO chardev (254:12) | |
[ 0.086025] gpio_stub_drv gpiochip12: registered GPIOs 78 to 82 on gpj1 | |
[ 0.090793] gpio gpiochip13: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.091046] gpio_stub_drv gpiochip13: (gpk0): added GPIO chardev (254:13) | |
[ 0.091130] gpio_stub_drv gpiochip13: registered GPIOs 83 to 89 on gpk0 | |
[ 0.091150] gpio gpiochip14: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.091346] gpio_stub_drv gpiochip14: (gpk1): added GPIO chardev (254:14) | |
[ 0.091415] gpio_stub_drv gpiochip14: registered GPIOs 90 to 96 on gpk1 | |
[ 0.091434] gpio gpiochip15: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.091629] gpio_stub_drv gpiochip15: (gpk2): added GPIO chardev (254:15) | |
[ 0.091698] gpio_stub_drv gpiochip15: registered GPIOs 97 to 103 on gpk2 | |
[ 0.091716] gpio gpiochip16: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.091912] gpio_stub_drv gpiochip16: (gpk3): added GPIO chardev (254:16) | |
[ 0.091980] gpio_stub_drv gpiochip16: registered GPIOs 104 to 110 on gpk3 | |
[ 0.091999] gpio gpiochip17: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.092196] gpio_stub_drv gpiochip17: (gpl0): added GPIO chardev (254:17) | |
[ 0.092265] gpio_stub_drv gpiochip17: registered GPIOs 111 to 117 on gpl0 | |
[ 0.092284] gpio gpiochip18: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.092471] gpio_stub_drv gpiochip18: (gpl1): added GPIO chardev (254:18) | |
[ 0.092545] gpio_stub_drv gpiochip18: registered GPIOs 118 to 119 on gpl1 | |
[ 0.092564] gpio gpiochip19: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.092755] gpio_stub_drv gpiochip19: (gpl2): added GPIO chardev (254:19) | |
[ 0.092835] gpio_stub_drv gpiochip19: registered GPIOs 120 to 127 on gpl2 | |
[ 0.092854] gpio gpiochip20: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.093045] gpio_stub_drv gpiochip20: (gpm0): added GPIO chardev (254:20) | |
[ 0.093113] gpio_stub_drv gpiochip20: registered GPIOs 128 to 135 on gpm0 | |
[ 0.093136] gpio gpiochip21: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.093335] gpio_stub_drv gpiochip21: (gpm1): added GPIO chardev (254:21) | |
[ 0.093404] gpio_stub_drv gpiochip21: registered GPIOs 136 to 142 on gpm1 | |
[ 0.093423] gpio gpiochip22: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.093617] gpio_stub_drv gpiochip22: (gpm2): added GPIO chardev (254:22) | |
[ 0.093686] gpio_stub_drv gpiochip22: registered GPIOs 143 to 147 on gpm2 | |
[ 0.093705] gpio gpiochip23: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.093891] gpio_stub_drv gpiochip23: (gpm3): added GPIO chardev (254:23) | |
[ 0.093966] gpio_stub_drv gpiochip23: registered GPIOs 148 to 155 on gpm3 | |
[ 0.093984] gpio gpiochip24: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.094178] gpio_stub_drv gpiochip24: (gpm4): added GPIO chardev (254:24) | |
[ 0.094273] gpio_stub_drv gpiochip24: registered GPIOs 156 to 163 on gpm4 | |
[ 0.094292] gpio gpiochip25: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.094483] gpio_stub_drv gpiochip25: (gpy0): added GPIO chardev (254:25) | |
[ 0.094552] gpio_stub_drv gpiochip25: registered GPIOs 164 to 169 on gpy0 | |
[ 0.094570] gpio gpiochip26: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.094764] gpio_stub_drv gpiochip26: (gpy1): added GPIO chardev (254:26) | |
[ 0.094832] gpio_stub_drv gpiochip26: registered GPIOs 170 to 173 on gpy1 | |
[ 0.094850] gpio gpiochip27: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.095089] gpio_stub_drv gpiochip27: (gpy2): added GPIO chardev (254:27) | |
[ 0.095159] gpio_stub_drv gpiochip27: registered GPIOs 174 to 179 on gpy2 | |
[ 0.095183] gpio gpiochip28: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.095370] gpio_stub_drv gpiochip28: (gpy3): added GPIO chardev (254:28) | |
[ 0.095446] gpio_stub_drv gpiochip28: registered GPIOs 180 to 187 on gpy3 | |
[ 0.095465] gpio gpiochip29: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.095666] gpio_stub_drv gpiochip29: (gpy4): added GPIO chardev (254:29) | |
[ 0.095742] gpio_stub_drv gpiochip29: registered GPIOs 188 to 195 on gpy4 | |
[ 0.095761] gpio gpiochip30: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.095954] gpio_stub_drv gpiochip30: (gpy5): added GPIO chardev (254:30) | |
[ 0.096022] gpio_stub_drv gpiochip30: registered GPIOs 196 to 203 on gpy5 | |
[ 0.096041] gpio gpiochip31: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.096237] gpio_stub_drv gpiochip31: (gpy6): added GPIO chardev (254:31) | |
[ 0.096311] gpio_stub_drv gpiochip31: registered GPIOs 204 to 211 on gpy6 | |
[ 0.096329] gpio gpiochip32: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.096523] gpio_stub_drv gpiochip32: (gpx0): added GPIO chardev (254:32) | |
[ 0.096592] gpio_stub_drv gpiochip32: registered GPIOs 212 to 219 on gpx0 | |
[ 0.096610] gpio gpiochip33: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.096798] gpio_stub_drv gpiochip33: (gpx1): added GPIO chardev (254:33) | |
[ 0.096874] gpio_stub_drv gpiochip33: registered GPIOs 220 to 227 on gpx1 | |
[ 0.096892] gpio gpiochip34: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.097079] gpio_stub_drv gpiochip34: (gpx2): added GPIO chardev (254:34) | |
[ 0.097154] gpio_stub_drv gpiochip34: registered GPIOs 228 to 235 on gpx2 | |
[ 0.097173] gpio gpiochip35: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.097360] gpio_stub_drv gpiochip35: (gpx3): added GPIO chardev (254:35) | |
[ 0.097433] gpio_stub_drv gpiochip35: registered GPIOs 236 to 243 on gpx3 | |
[ 0.098415] gpio gpiochip36: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.098632] gpio_stub_drv gpiochip36: (gpz): added GPIO chardev (254:36) | |
[ 0.098712] gpio_stub_drv gpiochip36: registered GPIOs 244 to 250 on gpz | |
[ 0.099755] gpio gpiochip37: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.099973] gpio_stub_drv gpiochip37: (gpv0): added GPIO chardev (254:37) | |
[ 0.100048] gpio_stub_drv gpiochip37: registered GPIOs 251 to 258 on gpv0 | |
[ 0.100066] gpio gpiochip38: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.100268] gpio_stub_drv gpiochip38: (gpv1): added GPIO chardev (254:38) | |
[ 0.100337] gpio_stub_drv gpiochip38: registered GPIOs 259 to 266 on gpv1 | |
[ 0.100355] gpio gpiochip39: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.100542] gpio_stub_drv gpiochip39: (gpv2): added GPIO chardev (254:39) | |
[ 0.100619] gpio_stub_drv gpiochip39: registered GPIOs 267 to 274 on gpv2 | |
[ 0.100637] gpio gpiochip40: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.100826] gpio_stub_drv gpiochip40: (gpv3): added GPIO chardev (254:40) | |
[ 0.100900] gpio_stub_drv gpiochip40: registered GPIOs 275 to 282 on gpv3 | |
[ 0.100923] gpio gpiochip41: Static allocation of GPIO base is deprecated, use dynamic allocation. | |
[ 0.101116] gpio_stub_drv gpiochip41: (gpv4): added GPIO chardev (254:41) | |
[ 0.101185] gpio_stub_drv gpiochip41: registered GPIOs 283 to 284 on gpv4 | |
[ 0.231359] reg-fixed-voltage voltage-regulator-1: using DT '/voltage-regulator-1' for '(null)' GPIO lookup | |
[ 0.231390] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/voltage-regulator-1[0]' | |
[ 0.231413] of_get_named_gpiod_flags: can't parse 'gpio' property of node '/voltage-regulator-1[0]' | |
[ 0.231429] reg-fixed-voltage voltage-regulator-1: using lookup tables for GPIO lookup | |
[ 0.231438] reg-fixed-voltage voltage-regulator-1: No GPIO consumer (null) found | |
[ 0.231796] reg-fixed-voltage voltage-regulator-2: using DT '/voltage-regulator-2' for '(null)' GPIO lookup | |
[ 0.231819] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/voltage-regulator-2[0]' | |
[ 0.231861] of_get_named_gpiod_flags: parsed 'gpio' property of node '/voltage-regulator-2[0]' - status (0) | |
[ 0.231885] gpio_stub_drv gpiochip20: Persistence not supported for GPIO 1 | |
[ 0.232212] reg-fixed-voltage voltage-regulator-3: using DT '/voltage-regulator-3' for '(null)' GPIO lookup | |
[ 0.232234] of_get_named_gpiod_flags: can't parse 'gpios' property of node '/voltage-regulator-3[0]' | |
[ 0.232265] of_get_named_gpiod_flags: parsed 'gpio' property of node '/voltage-regulator-3[0]' - status (0) | |
[ 0.232285] gpio_stub_drv gpiochip3: Persistence not supported for GPIO 1 | |
[ 0.233125] iommu: Default domain type: Translated | |
[ 0.233133] iommu: DMA domain TLB invalidation policy: strict mode | |
[ 0.233472] SCSI subsystem initialized | |
[ 0.233514] libata version 3.00 loaded. | |
[ 0.233662] usbcore: registered new interface driver usbfs | |
[ 0.233696] usbcore: registered new interface driver hub | |
[ 0.233740] usbcore: registered new device driver usb | |
[ 0.234019] i2c-gpio i2c-gpio-1: using DT '/i2c-gpio-1' for 'sda' GPIO lookup | |
[ 0.234058] of_get_named_gpiod_flags: parsed 'sda-gpios' property of node '/i2c-gpio-1[0]' - status (0) | |
[ 0.234081] gpio_stub_drv gpiochip22: Persistence not supported for GPIO 0 | |
[ 0.234094] i2c-gpio i2c-gpio-1: using DT '/i2c-gpio-1' for 'scl' GPIO lookup | |
[ 0.234122] of_get_named_gpiod_flags: parsed 'scl-gpios' property of node '/i2c-gpio-1[0]' - status (0) | |
[ 0.234140] gpio_stub_drv gpiochip22: Persistence not supported for GPIO 1 | |
[ 0.234751] i2c-gpio i2c-gpio-1: using lines 143 (SDA) and 144 (SCL) | |
[ 0.234841] i2c-gpio i2c-gpio-3: using DT '/i2c-gpio-3' for 'sda' GPIO lookup | |
[ 0.234875] of_get_named_gpiod_flags: parsed 'sda-gpios' property of node '/i2c-gpio-3[0]' - status (0) | |
[ 0.234896] gpio_stub_drv gpiochip25: Persistence not supported for GPIO 2 | |
[ 0.234909] i2c-gpio i2c-gpio-3: using DT '/i2c-gpio-3' for 'scl' GPIO lookup | |
[ 0.234936] of_get_named_gpiod_flags: parsed 'scl-gpios' property of node '/i2c-gpio-3[0]' - status (0) | |
[ 0.234954] gpio_stub_drv gpiochip25: Persistence not supported for GPIO 3 | |
[ 0.235498] i2c-gpio i2c-gpio-3: using lines 166 (SDA) and 167 (SCL) | |
[ 0.235670] i2c-gpio i2c-gpio-24: using DT '/i2c-gpio-24' for 'sda' GPIO lookup | |
[ 0.235705] of_get_named_gpiod_flags: parsed 'sda-gpios' property of node '/i2c-gpio-24[0]' - status (0) | |
[ 0.235726] gpio_stub_drv gpiochip24: Persistence not supported for GPIO 3 | |
[ 0.235738] i2c-gpio i2c-gpio-24: using DT '/i2c-gpio-24' for 'scl' GPIO lookup | |
[ 0.235765] of_get_named_gpiod_flags: parsed 'scl-gpios' property of node '/i2c-gpio-24[0]' - status (0) | |
[ 0.235784] gpio_stub_drv gpiochip24: Persistence not supported for GPIO 2 | |
[ 0.236188] i2c-gpio i2c-gpio-24: using lines 159 (SDA) and 158 (SCL) | |
[ 0.236757] s3c-i2c 138d0000.i2c: slave address 0x10 | |
[ 0.236771] s3c-i2c 138d0000.i2c: bus frequency set to 97 KHz | |
[ 0.238209] s3c-i2c 138d0000.i2c: i2c-7: S3C I2C adapter | |
[ 0.239853] clocksource: Switched to clocksource mct-frc | |
[ 0.250287] NET: Registered PF_INET protocol family | |
[ 0.250553] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) | |
[ 0.252507] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) | |
[ 0.252581] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) | |
[ 0.252598] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) | |
[ 0.252674] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) | |
[ 0.252904] TCP: Hash tables configured (established 8192 bind 8192) | |
[ 0.253008] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) | |
[ 0.253056] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) | |
[ 0.253219] NET: Registered PF_UNIX/PF_LOCAL protocol family | |
[ 0.253730] RPC: Registered named UNIX socket transport module. | |
[ 0.253738] RPC: Registered udp transport module. | |
[ 0.253743] RPC: Registered tcp transport module. | |
[ 0.253748] RPC: Registered tcp NFSv4.1 backchannel transport module. | |
[ 0.254183] Trying to unpack rootfs image as initramfs... | |
[ 0.269981] hw perfevents: enabled with armv7_cortex_a9 PMU driver, 7 counters available | |
[ 0.271402] Initialise system trusted keyrings | |
[ 0.271638] workingset: timestamp_bits=14 max_order=18 bucket_order=4 | |
[ 0.272036] squashfs: version 4.0 (2009/01/31) Phillip Lougher | |
[ 0.272351] NFS: Registering the id_resolver key type | |
[ 0.272397] Key type id_resolver registered | |
[ 0.272403] Key type id_legacy registered | |
[ 0.272434] nfs4filelayout_init: NFSv4 File Layout Driver Registering... | |
[ 0.272452] nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering... | |
[ 0.272484] romfs: ROMFS MTD (C) 2007 Red Hat, Inc. | |
[ 0.272878] Key type asymmetric registered | |
[ 0.272887] Asymmetric key parser 'x509' registered | |
[ 0.272893] Asymmetric key parser 'pkcs8' registered | |
[ 0.272980] bounce: pool size: 64 pages | |
[ 0.273032] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) | |
[ 0.273193] io scheduler mq-deadline registered | |
[ 0.273201] io scheduler kyber registered | |
[ 0.276177] lp855x: Entering probe | |
[ 0.278514] lp855x: configure breakpoint 1 | |
[ 0.278932] lp855x: configure breakpoint 2 | |
[ 0.279332] lp855x: configure breakpoint 3 | |
[ 0.280670] lp855x: Probe success | |
[ 0.285908] dma-pl330 12680000.dma-controller: Loaded driver for PL330 DMAC-141330 | |
[ 0.285925] dma-pl330 12680000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 | |
[ 0.288405] dma-pl330 12690000.dma-controller: Loaded driver for PL330 DMAC-141330 | |
[ 0.288419] dma-pl330 12690000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 | |
[ 0.289438] dma-pl330 12850000.dma-controller: Loaded driver for PL330 DMAC-141330 | |
[ 0.289450] dma-pl330 12850000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 | |
[ 0.289763] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS4212] PRO_ID[0x43220000] REV[0x10] Detected | |
[ 0.331056] rootfs image is not initramfs (invalid magic at start of compressed archive); looks like an initrd | |
[ 0.351466] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled | |
[ 0.354500] 13800000.serial: ttySAC0 at MMIO 0x13800000 (irq = 88, base_baud = 0) is a S3C6400/10 | |
[ 0.355306] 13810000.serial: ttySAC1 at MMIO 0x13810000 (irq = 89, base_baud = 0) is a S3C6400/10 | |
[ 0.356002] 13820000.serial: ttySAC2 at MMIO 0x13820000 (irq = 90, base_baud = 0) is a S3C6400/10 | |
[ 0.356092] printk: console [ttySAC2] enabled | |
[ 0.372719] Freeing initrd memory: 8192K | |
[ 0.379952] 13830000.serial: ttySAC3 at MMIO 0x13830000 (irq = 91, base_baud = 0) is a S3C6400/10 | |
[ 2.474719] exynos4-fb 11c00000.fimd: Adding to iommu group 0 | |
[ 2.480004] OF: graph: no port node found in /soc/fimd@11c00000 | |
[ 2.501365] brd: module loaded | |
[ 2.509063] loop: module loaded | |
[ 2.511644] max77693 9-0066: device ID: 0x4 | |
[ 2.521893] max77693-charger: Failed to locate of_node [id: -1] | |
[ 2.526457] max77693-muic: Failed to locate of_node [id: -1] | |
[ 2.532108] max77693-haptic: Failed to locate of_node [id: -1] | |
[ 2.537887] max77693-led: Failed to locate of_node [id: -1] | |
[ 2.545521] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO1' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 2.555329] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO1[0]' | |
[ 2.568413] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO1[0]' | |
[ 2.581425] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 2.588484] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO2' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 2.599659] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO2[0]' | |
[ 2.612773] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO2[0]' | |
[ 2.625777] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 2.632851] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO3' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 2.644013] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO3[0]' | |
[ 2.657119] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO3[0]' | |
[ 2.670139] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 2.677187] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO5' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 2.688368] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO5[0]' | |
[ 2.701473] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO5[0]' | |
[ 2.714486] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 2.721554] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO8' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 2.732729] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO8[0]' | |
[ 2.745828] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO8[0]' | |
[ 2.758840] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 2.765909] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO9' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 2.777078] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO9[0]' | |
[ 2.790200] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO9[0]' | |
[ 2.803197] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 2.810264] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO10' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 2.821520] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO10[0]' | |
[ 2.834711] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO10[0]' | |
[ 2.847810] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 2.854886] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO12' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 2.866134] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO12[0]' | |
[ 2.879328] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO12[0]' | |
[ 2.892426] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 2.899492] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO13' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 2.910757] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO13[0]' | |
[ 2.923943] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO13[0]' | |
[ 2.937041] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 2.944110] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO15' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 2.955364] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO15[0]' | |
[ 2.968556] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO15[0]' | |
[ 2.981662] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 2.988715] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO19' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 2.999980] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO19[0]' | |
[ 3.013173] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO19[0]' | |
[ 3.026271] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 3.033346] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO20' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 3.044601] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO20[0]' | |
[ 3.057788] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO20[0]' | |
[ 3.070887] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 3.077942] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO21' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 3.089210] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO21[0]' | |
[ 3.102409] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO21[0]' | |
[ 3.115502] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 3.122573] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO22' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 3.133869] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO22[0]' | |
[ 3.147020] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO22[0]' | |
[ 3.160124] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 3.167174] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO23' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 3.178441] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO23[0]' | |
[ 3.191633] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO23[0]' | |
[ 3.204732] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 3.211803] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO24' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 3.223062] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO24[0]' | |
[ 3.236249] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO24[0]' | |
[ 3.249347] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 3.256418] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO25' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 3.267670] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO25[0]' | |
[ 3.280870] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO25[0]' | |
[ 3.293963] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 3.301033] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO26' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 3.312286] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO26[0]' | |
[ 3.325478] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO26[0]' | |
[ 3.338577] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 3.345655] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/LDO27' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 3.356903] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO27[0]' | |
[ 3.370095] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/LDO27[0]' | |
[ 3.383193] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 3.390263] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/BUCK1' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 3.401523] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/BUCK1[0]' | |
[ 3.414710] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/BUCK1[0]' | |
[ 3.427808] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 3.434887] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/BUCK2' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 3.446131] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/BUCK2[0]' | |
[ 3.459324] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/BUCK2[0]' | |
[ 3.472429] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 3.479487] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/BUCK3' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 3.490748] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/BUCK3[0]' | |
[ 3.503939] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/BUCK3[0]' | |
[ 3.517036] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 3.524118] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/BUCK4' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 3.535368] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/BUCK4[0]' | |
[ 3.548555] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/BUCK4[0]' | |
[ 3.561654] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 3.568714] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/BUCK5' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 3.579977] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/BUCK5[0]' | |
[ 3.593176] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/BUCK5[0]' | |
[ 3.606269] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 3.613353] (NULL device *): using DT '/soc/i2c@138d0000/pmic@66/regulators/BUCK6' for 's5m8767,pmic-ext-control' GPIO lookup | |
[ 3.624593] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpios' property of node '/soc/i2c@138d0000/pmic@66/regulators/BUCK6[0]' | |
[ 3.637785] of_get_named_gpiod_flags: can't parse 's5m8767,pmic-ext-control-gpio' property of node '/soc/i2c@138d0000/pmic@66/regulators/BUCK6[0]' | |
[ 3.650890] (NULL device *): No GPIO consumer s5m8767,pmic-ext-control found | |
[ 3.657966] of_get_named_gpiod_flags: parsed 's5m8767,pmic-buck-ds-gpios' property of node '/soc/i2c@138d0000/pmic@66[0]' - status (0) | |
[ 3.669994] of_get_named_gpiod_flags: parsed 's5m8767,pmic-buck-ds-gpios' property of node '/soc/i2c@138d0000/pmic@66[1]' - status (0) | |
[ 3.682060] of_get_named_gpiod_flags: parsed 's5m8767,pmic-buck-ds-gpios' property of node '/soc/i2c@138d0000/pmic@66[2]' - status (0) | |
[ 3.705680] VCC_3.3V_MHL: Bringing 1800000uV into 3300000-3300000uV | |
[ 3.715510] VSIL_1.2V: Bringing 1800000uV into 1200000-1200000uV | |
[ 3.737573] LEDA_2.8V: Bringing 3000000uV into 2800000-2800000uV | |
[ 3.745684] TSP_VDD_1.8V: Bringing 1200000uV into 1800000-1800000uV | |
[ 3.755532] VTCAM_1.8V: Bringing 1500000uV into 1800000-1800000uV | |
[ 3.777788] s2mps11-clk s5m8767-clk: DMA mask not set | |
[ 3.783788] mdio_bus fixed-0: using lookup tables for GPIO lookup | |
[ 3.788414] mdio_bus fixed-0: No GPIO consumer reset found | |
[ 3.794225] usbcore: registered new interface driver r8152 | |
[ 3.799373] usbcore: registered new interface driver asix | |
[ 3.804777] usbcore: registered new interface driver ax88179_178a | |
[ 3.810847] usbcore: registered new interface driver cdc_ether | |
[ 3.816651] usbcore: registered new interface driver smsc75xx | |
[ 3.822394] usbcore: registered new interface driver smsc95xx | |
[ 3.828103] usbcore: registered new interface driver net1080 | |
[ 3.833797] usbcore: registered new interface driver cdc_subset | |
[ 3.839649] usbcore: registered new interface driver zaurus | |
[ 3.845245] usbcore: registered new interface driver cdc_ncm | |
[ 3.850866] usbcore: registered new interface driver r8153_ecm | |
[ 3.859154] usbcore: registered new interface driver uas | |
[ 3.863047] usbcore: registered new interface driver usb-storage | |
[ 3.869291] UDC core: g_ether: couldn't find an available UDC | |
[ 3.875422] max77693-haptic max77693-haptic: failed to get pwm device | |
[ 3.882150] s3c-rtc 10070000.rtc: rtc disabled, re-enabling | |
[ 3.887268] s3c-rtc 10070000.rtc: registered as rtc0 | |
[ 3.891671] s3c-rtc 10070000.rtc: hctosys: unable to read the hardware clock | |
[ 3.905635] s5m-rtc s5m-rtc: registered as rtc1 | |
[ 3.908733] i2c_dev: i2c /dev entries driver | |
[ 3.918556] max77693-charger max77693-charger: no charger OF node | |
[ 3.923218] max77693-charger: probe of max77693-charger failed with error -22 | |
[ 3.954058] s3c2410-wdt 10060000.watchdog: watchdog inactive, reset disabled, irq disabled | |
[ 3.961299] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com | |
[ 3.972398] thermal_sys: Add a cooling_device property with at least one device | |
[ 3.978246] thermal thermal_zone1: binding zone cpu-thermal with cdev cpufreq-cpu0 failed:-2 | |
[ 3.987573] sdhci: Secure Digital Host Controller Interface driver | |
[ 3.992880] sdhci: Copyright(c) Pierre Ossman | |
[ 3.997455] Synopsys Designware Multimedia Card Interface Driver | |
[ 3.997750] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/soc/mmc@12530000[0]' - status (0) | |
[ 4.004364] max77693-led max77693-led: No DT child node found for connected LED(s). | |
[ 4.013304] s3c-sdhci 12540000.mmc: clock source 2: mmc_busclk.2 (40000000 Hz) | |
[ 4.020618] max77693-led: probe of max77693-led failed with error -22 | |
[ 4.027893] s3c-sdhci 12530000.mmc: clock source 2: mmc_busclk.2 (88888889 Hz) | |
[ 4.034715] s3c-sdhci 12540000.mmc: using DT '/soc/mmc@12540000' for 'wp' GPIO lookup | |
[ 4.041721] dwmmc_exynos 12550000.mmc: IDMAC supports 32-bit address mode. | |
[ 4.049242] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@12540000[0]' | |
[ 4.056259] s3c-sdhci 12530000.mmc: using DT '/soc/mmc@12530000' for 'cd' GPIO lookup | |
[ 4.065261] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@12540000[0]' | |
[ 4.073120] of_get_named_gpiod_flags: parsed 'cd-gpios' property of node '/soc/mmc@12530000[0]' - status (0) | |
[ 4.082101] s5p-secss 10830000.sss: s5p-sss driver registered | |
[ 4.091889] gpio_stub_drv gpiochip35: Persistence not supported for GPIO 4 | |
[ 4.097631] s3c-sdhci 12540000.mmc: using lookup tables for GPIO lookup | |
[ 4.104574] dwmmc_exynos 12550000.mmc: Using internal DMA controller. | |
[ 4.111438] usbcore: registered new interface driver usbhid | |
[ 4.117471] s3c-sdhci 12530000.mmc: Got CD GPIO | |
[ 4.123030] usbhid: USB HID core driver | |
[ 4.127531] s3c-sdhci 12530000.mmc: using DT '/soc/mmc@12530000' for 'wp' GPIO lookup | |
[ 4.131376] s3c-sdhci 12540000.mmc: No GPIO consumer wp found | |
[ 4.139169] dwmmc_exynos 12550000.mmc: Version ID is 240a | |
[ 4.145519] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@12530000[0]' | |
[ 4.150318] dwmmc_exynos 12550000.mmc: DW MMC controller at irq 103,32 bit host data width,128 deep fifo | |
[ 4.162669] exynos-ppmu: new PPMU device registered 106a0000.ppmu (ppmu-event3-dmc0) | |
[ 4.169182] dwmmc_exynos 12550000.mmc: using DT '/soc/mmc@12550000' for 'wp' GPIO lookup | |
[ 4.177236] exynos-ppmu: new PPMU device registered 106b0000.ppmu (ppmu-event3-dmc1) | |
[ 4.184754] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@12530000[0]' | |
[ 4.192798] exynos-ppmu: new PPMU device registered 112a0000.ppmu (ppmu-event3-rightbus) | |
[ 4.201477] of_get_named_gpiod_flags: can't parse 'wp-gpios' property of node '/soc/mmc@12550000[0]' | |
[ 4.209528] mmc1: SDHCI controller on samsung-hsmmc [12540000.mmc] using ADMA | |
[ 4.218605] s3c-sdhci 12530000.mmc: using lookup tables for GPIO lookup | |
[ 4.218610] s3c-sdhci 12530000.mmc: No GPIO consumer wp found | |
[ 4.226318] exynos-ppmu: new PPMU device registered 116a0000.ppmu (ppmu-event3-leftbus) | |
[ 4.232318] of_get_named_gpiod_flags: can't parse 'wp-gpio' property of node '/soc/mmc@12550000[0]' | |
[ 4.238536] input: max77693-muic/dock as /devices/platform/i2c-gpio-1/i2c-9/9-0066/max77693-muic/input/input0 | |
[ 4.246213] dwmmc_exynos 12550000.mmc: using lookup tables for GPIO lookup | |
[ 4.272053] dwmmc_exynos 12550000.mmc: No GPIO consumer wp found | |
[ 4.277533] max77693-muic max77693-muic: device ID : 0x8d | |
[ 4.277805] mmc_host mmc2: card is non-removable. | |
[ 4.284740] NET: Registered PF_INET6 protocol family | |
[ 4.293629] Segment Routing with IPv6 | |
[ 4.296528] In-situ OAM (IOAM) with IPv6 | |
[ 4.300435] sit: IPv6, IPv4 and MPLS over IPv4 tunneling driver | |
[ 4.306664] NET: Registered PF_PACKET protocol family | |
[ 4.311349] NET: Registered PF_KEY protocol family | |
[ 4.316131] Key type dns_resolver registered | |
[ 4.320898] Registering SWP/SWPB emulation handler | |
[ 4.330131] Loading compiled-in X.509 certificates | |
[ 4.338024] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) | |
[ 4.357285] [drm] Exynos DRM: using 11c00000.fimd device for DMA mapping operations | |
[ 4.359193] mmc0: SDHCI controller on samsung-hsmmc [12530000.mmc] using ADMA | |
[ 4.363993] exynos-drm exynos-drm: bound 11c00000.fimd (ops fimd_component_ops) | |
[ 4.379445] panel-simple-dsi 11c80000.dsi.0: using DT '/soc/dsi@11c80000/panel@0' for 'enable' GPIO lookup | |
[ 4.387722] of_get_named_gpiod_flags: parsed 'enable-gpios' property of node '/soc/dsi@11c80000/panel@0[0]' - status (0) | |
[ 4.398541] gpio_stub_drv gpiochip7: Persistence not supported for GPIO 4 | |
[ 4.405332] exynos-dsi 11c80000.dsi: [drm:exynos_dsi_host_attach] Attached s6d7aa0 device | |
[ 4.413541] exynos-drm exynos-drm: bound 11c80000.dsi (ops exynos_dsi_component_ops) | |
[ 4.456290] Console: switching to colour frame buffer device 109x73 | |
[ 4.493829] exynos-drm exynos-drm: [drm] fb0: exynosdrmfb frame buffer device | |
[ 4.502509] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0 | |
[ 4.510507] lima 13000000.gpu: gp - mali400 version major 1 minor 1 | |
[ 4.515349] lima 13000000.gpu: pp0 - mali400 version major 1 minor 1 | |
[ 4.521930] lima 13000000.gpu: pp1 - mali400 version major 1 minor 1 | |
[ 4.528089] lima 13000000.gpu: pp2 - mali400 version major 1 minor 1 | |
[ 4.534473] lima 13000000.gpu: pp3 - mali400 version major 1 minor 1 | |
[ 4.540722] lima 13000000.gpu: l2 cache 128K, 4-way, 64byte cache line, 64bit external bus | |
[ 4.549226] lima 13000000.gpu: bus rate = 24000000 | |
[ 4.553716] lima 13000000.gpu: mod rate = 50000000 | |
[ 4.559871] thermal_sys: Add a cooling_device property with at least one device | |
[ 4.565749] thermal thermal_zone1: binding zone cpu-thermal with cdev devfreq-13000000.gpu failed:-2 | |
[ 4.575356] [drm] Initialized lima 1.1.0 20191231 for 13000000.gpu on minor 1 | |
[ 4.583363] mmc_host mmc2: Bus speed (slot 0) = 50000000Hz (slot req 52000000Hz, actual 50000000HZ div = 0) | |
[ 4.587152] dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter besl=1 | |
[ 4.598723] dwc2 12480000.hsotg: dwc2_check_params: Invalid parameter g_np_tx_fifo_size=1024 | |
[ 4.607189] dwc2 12480000.hsotg: EPs: 16, dedicated fifos, 7808 entries in SPRAM | |
[ 4.615527] mmc2: new DDR MMC card at address 0001 | |
[ 4.616153] using random self ethernet address | |
[ 4.619946] mmcblk2: mmc2:0001 016GE2 14.7 GiB | |
[ 4.623755] using random host ethernet address | |
[ 4.633329] usb0: HOST MAC c6:3e:45:9c:05:c1 | |
[ 4.636930] usb0: MAC 12:f8:87:a3:4c:68 | |
[ 4.640845] using random self ethernet address | |
[ 4.645222] using random host ethernet address | |
[ 4.649649] g_ether gadget.0: Ethernet Gadget, version: Memorial Day 2008 | |
[ 4.656411] g_ether gadget.0: g_ether ready | |
[ 4.661633] dwc2 12480000.hsotg: bound driver g_ether | |
[ 4.669424] mmcblk2: p1 p2 p3 p4 p5 p6 p7 p8 p9 p10 p11 p12 p13 p14 p15 p16 p17 p18 p19 p20 p21 | |
[ 4.678461] exynos-bus: new bus device registered: soc:bus-dmc (100000 KHz ~ 400000 KHz) | |
[ 4.679452] mmcblk2boot0: mmc2:0001 016GE2 4.00 MiB | |
[ 4.685960] exynos-bus: new bus device registered: soc:bus-acp (100000 KHz ~ 267000 KHz) | |
[ 4.691640] mmcblk2boot1: mmc2:0001 016GE2 4.00 MiB | |
[ 4.699088] exynos-bus: new bus device registered: soc:bus-c2c (100000 KHz ~ 400000 KHz) | |
[ 4.704401] mmcblk2rpmb: mmc2:0001 016GE2 4.00 MiB, chardev (247:0) | |
[ 4.718609] exynos-bus: new bus device registered: soc:bus-leftbus (100000 KHz ~ 200000 KHz) | |
[ 4.726596] exynos-bus: new bus device registered: soc:bus-rightbus (100000 KHz ~ 200000 KHz) | |
[ 4.734964] exynos-bus: new bus device registered: soc:bus-display (160000 KHz ~ 200000 KHz) | |
[ 4.743190] exynos-bus: new bus device registered: soc:bus-fsys (100000 KHz ~ 134000 KHz) | |
[ 4.751365] exynos-bus: new bus device registered: soc:bus-peri ( 50000 KHz ~ 100000 KHz) | |
[ 4.759706] exynos-bus: new bus device registered: soc:bus-mfc (100000 KHz ~ 200000 KHz) | |
[ 4.812293] Freeing unused kernel image (initmem) memory: 1024K | |
[ 4.816962] Run /init as init process | |
[ 4.820434] with arguments: | |
[ 4.823344] /init | |
[ 4.825601] PMOS_NO_OUTPUT_REDIRECT | |
[ 4.829420] with environment: | |
[ 4.832580] HOME=/ | |
[ 4.834889] TERM=linux | |
[ 7.138146] using random self ethernet address | |
[ 7.138170] using random host ethernet address | |
[ 7.152053] UDC core: g1: couldn't find an available UDC or it's busy | |
[ 24.810504] max77693-muic max77693-muic: external connector is attached(chg_type:0x1, prev_chg_type:0x1) | |
[ 24.812020] max77693-muic max77693-muic: CONTROL1 : 0x09, CONTROL2 : 0x04, state : attached | |
[ 25.009977] dwc2 12480000.hsotg: new device is high-speed | |
[ 25.136786] dwc2 12480000.hsotg: new device is high-speed | |
[ 25.201123] dwc2 12480000.hsotg: new address 13 | |
[ 25.282559] IPv6: ADDRCONF(NETDEV_CHANGE): usb0: link becomes ready | |
[ 35.051096] CHARGER: disabling |
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment