u-blox commands for activating SFRBX/RAWX (using RTKLIB) with M8N FW 3.01

u-blox-m8n-1enable-sfrbx-rawx-hex.txt

# u-blox commands for activating SFRBX/RAWX (using RTKLIB) with M8N FW 3.01
# tested on an 
# HW UBX-M8030 00080000*60
# EXT CORE 3.01 (107900)*33
# ROM BASE 2.01 (75331)*19
# FWVER=SPG 3.01*46
# PROTVER=18.00*11

# issue these commands in a terminal that supports sending HEX (e.g. ScriptCommunicator)

# enable RAWX
B5 62 06 01 03 00 02 15 01 22 70

# enable SFRBX
B5 62 06 01 03 00 02 13 01 20 6C

#enable NAVSOL
B5 62 06 01 03 00 01 06 01 12 4F

#enable TIMEGPS
B5 62 06 01 03 00 01 20 01 2C 83

# enable MEASX
B5 62 06 01 03 00 02 14 01 21 6E

# enable POSLLH
B5 62 06 01 03 00 01 02 01 0E 47

# enable NAV-DOP
B5 62 06 01 03 00 01 04 01 10 4b



# enable SFRB, doesnt work (no output from device)
# B5 62 06 01 03 00 02 11 01 1E 68

# enable SMEAS, doesnt work (no output from device)
# B5 62 06 01 03 00 0D 13 01 2B 8D


#combined for sending
B5 62 06 01 03 00 02 15 01 22 70 
B5 62 06 01 03 00 02 13 01 20 6C 
B5 62 06 01 03 00 01 06 01 12 4F 
B5 62 06 01 03 00 01 20 01 2C 83 
B5 62 06 01 03 00 02 14 01 21 6E

u-blox-m8n-2disable-nmea-hex.txt

# these commands disable (all) NMEA messages (tested from u-center GUI)
# issue these commands in a terminal that supports sending HEX (e.g. ScriptCommunicator)
B5 62 06 01 03 00 F0 0A 00 04 23 
B5 62 06 01 03 00 F0 09 00 03 21 
B5 62 06 01 03 00 F0 00 00 FA 0F 
B5 62 06 01 03 00 F0 01 00 FB 11 
B5 62 06 01 03 00 F0 0D 00 07 29 
B5 62 06 01 03 00 F0 06 00 00 1B 
B5 62 06 01 03 00 F0 02 00 FC 13 
B5 62 06 01 03 00 F0 07 00 01 1D 
B5 62 06 01 03 00 F0 03 00 FD 15 
B5 62 06 01 03 00 F0 04 00 FE 17 
B5 62 06 01 03 00 F0 0F 00 09 2D 
B5 62 06 01 03 00 F0 05 00 FF 19 
B5 62 06 01 03 00 F0 08 00 02 1F 
B5 62 06 01 03 00 F1 00 00 FB 12 
B5 62 06 01 03 00 F1 01 00 FC 14 
B5 62 06 01 03 00 F1 03 00 FE 18 
B5 62 06 01 03 00 F1 04 00 FF 1A 
B5 62 06 01 03 00 F1 05 00 00 1C 
B5 62 06 01 03 00 F1 06 00 01 1E 
B5 62 06 01 03 00 F0 00 00 FA 0F 
B5 62 06 01 03 00 F0 01 00 FB 11