Skip to content

Instantly share code, notes, and snippets.

@krobertson
Last active March 8, 2023 05:43
Show Gist options
  • Save krobertson/adfd96689e8b66e7e122705c9ac6bb21 to your computer and use it in GitHub Desktop.
Save krobertson/adfd96689e8b66e7e122705c9ac6bb21 to your computer and use it in GitHub Desktop.
Voron 2.4 Printed Parts List

Voron 2.4 Printed Parts List

Parts for: Electronics_Compartment/DIN_Brackets

  [ ] [ ]     duet_duex_bracket_x2.stl
  [ ]         lrs_psu_bracket_clip.stl
  [ ] [ ] [ ] pcb_din_clip_x3.stl
  [ ] [ ]     ramps_bracket_x2.stl
  [ ]         raspberrypi_bracket.stl
  [ ]         rs25_psu_bracket_clip.stl
  [ ] [ ]     skr_1.3_bracket_x2.stl
  [ ] [ ]     skr_mini_e2_bracket_x2.stl
  [ ] [ ]     skr_mini_e3_bracket_x2.stl

Parts for: Electronics_Compartment/LCD_Module

  [ ] [a]_mini12864_case_hinge.stl
  [ ] mini12864_case_front.stl
  [ ] mini12864_case_rear.stl
  [ ] mini12864_spacer.stl

Parts for: Electronics_Compartment/Legacy_Brackets

  [ ]     dual_ramps_bracket_legacy.stl
  [ ] [ ] duet_duex_bracket_legacy_x2.stl
  [ ]     lrs_bracket_legacy.stl
  [ ] [ ] mks_gen_1.4_bracket_legacy_x2.stl
  [ ] [ ] mks_gen_L_bracket_legacy_x2.stl
  [ ]     raspberry_pi_bracket.stl
  [ ]     rs_25_psu_bracket_legacy.stl
  [ ]     rs_35_bracket_legacy.stl
  [ ]     skr_1.3_bracket_legacy.stl
  [ ]     skr_mini_e3_bracket_legacy.stl

Parts for: Electronics_Compartment/Plug_Panel

  [ ] [a]_keystone_blank_insert.stl
  [ ] plug_panel.stl
  [ ] plug_panel_filtered_mains.stl

Parts for: Exhaust_Filter

  [ ]     [a]_filter_access_cover.stl
  [ ]     exhaust_filter_grill.stl
  [ ]     exhaust_filter_housing.stl
  [ ] [ ] exhaust_filter_mount_x2.stl

Parts for: Gantry

  [ ] [ ] [ ] [ ] [a]_z_belt_clip_lower_x4.stl
  [ ] [ ] [ ] [ ] [a]_z_belt_clip_upper_x4.stl
  [ ]             z_chain_bottom_anchor.stl
  [ ]             z_chain_guide.stl

Parts for: Gantry/AB_Drive_Units

  [ ]     [a]_cable_cover.stl
  [ ] [ ] [a]_z_chain_retainer_bracket_x2.stl
  [ ]     a_drive_frame_lower.stl
  [ ]     a_drive_frame_upper.stl
  [ ]     b_drive_frame_lower.stl
  [ ]     b_drive_frame_upper.stl

Parts for: Gantry/Front_Idlers

  [ ] [a]_tensioner_left.stl
  [ ] [a]_tensioner_right.stl
  [ ] front_idler_left_lower.stl
  [ ] front_idler_left_upper.stl
  [ ] front_idler_right_lower.stl
  [ ] front_idler_right_upper.stl

Parts for: Gantry/X_Axis/X Carriage

  [ ] [ ] [a]_belt_clamp_x2.stl
  [ ]     [a]_blower_housing_front.stl
  [ ]     blower_housing_rear.stl
  [ ]     hotend_fan_mount.stl
  [ ]     probe_retainer_bracket.stl
  [ ]     x_carriage_frame_left.stl
  [ ]     x_carriage_frame_right.stl
  [ ]     x_carriage_pivot_block.stl

Parts for: Gantry/X_Axis/X Carriage/Bowden

  [ ] bowden_module_front.stl
  [ ] bowden_module_rear_generic.stl
  [ ] bowden_module_rear_igus.stl
  [ ] bsp_adapter.stl
  [ ] tl_collet_adapter.stl

Parts for: Gantry/X_Axis/X Carriage/Direct Feed

  [ ] [a]_connector_cover.stl
  [ ] [a]_guidler.stl
  [ ] [a]_latch.stl
  [ ] chain_anchor_generic.stl
  [ ] chain_anchor_igus.stl
  [ ] extruder_body.stl
  [ ] extruder_motor_plate.stl
  [ ] latch_shuttle.stl

Parts for: Gantry/X_Axis/X Carriage/Printheads/E3D V6

  [ ] printhead_front_e3dv6.stl
  [ ] printhead_rear_e3dv6.stl

Parts for: Gantry/X_Axis/X Carriage/Printheads/Slice Mosquito

  [ ] printhead_front_mosquito.stl
  [ ] printhead_rear_mosquito.stl

Parts for: Gantry/X_Axis/X Carriage/Printheads/TriangleLab Dragon

  [ ] printhead_rear_dragon.stl

Parts for: Gantry/X_Axis/XY Joints

  [ ] [a]_endstop_pod_hall_effect.stl
  [ ] [a]_endstop_pod_microswitch.stl
  [ ] [a]_xy_joint_cable_bridge_generic.stl
  [ ] [a]_xy_joint_cable_bridge_igus.stl
  [ ] xy_joint_left_lower.stl
  [ ] xy_joint_left_upper.stl
  [ ] xy_joint_right_lower.stl
  [ ] xy_joint_right_upper.stl

Parts for: Gantry/Z_Joints

  [ ] [ ] [ ] [ ] z_joint_lower_x4.stl
  [ ]             z_joint_upper_hall_effect.stl
  [ ] [ ] [ ] [ ] z_joint_upper_x4.stl

Parts for: Panel_Mounting

  [ ] [ ] [ ] [ ]                                 bottom_panel_clip_x4.stl
  [ ] [ ]                                         bottom_panel_hinge_x2.stl
  [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] corner_panel_clip_3mm_x12.stl
  [ ] [ ] [ ] [ ]                                 corner_panel_clip_6mm_x4.stl
  [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] [ ] midspan_panel_clip_3mm_x12.stl
  [ ] [ ] [ ]                                     midspan_panel_clip_6mm_x3.stl
  [ ] [ ]                                         z_belt_cover_a_x2.stl
  [ ] [ ]                                         z_belt_cover_b_x2.stl

Parts for: Panel_Mounting/Front_Doors

  [ ] [ ] [ ] [ ] door_hinge_x4.stl
  [ ] [ ]         handle_a_x2.stl
  [ ] [ ]         handle_b_x2.stl
  [ ] [ ]         latch_x2.stl

Parts for: Skirts

  [ ]     [a]_60mm_fan_blank_insert.stl
  [ ] [ ] [a]_belt_guard_a_x2.stl
  [ ] [ ] [a]_belt_guard_b_x2.stl
  [ ] [ ] side_fan_support_x2.stl

Parts for: Skirts/250

  [ ] [ ] front_rear_skirt_a_250_x2.stl
  [ ] [ ] front_rear_skirt_b_250_x2.stl
  [ ] [ ] side_skirt_a_250_x2.stl
  [ ] [ ] side_skirt_b_250_x2.stl

Parts for: Skirts/300

  [ ] [ ] front_rear_skirt_a_300_x2.stl
  [ ] [ ] front_rear_skirt_b_300_x2.stl
  [ ] [ ] side_skirt_a_300_x2.stl
  [ ] [ ] side_skirt_b_300_x2.stl

Parts for: Skirts/350

  [ ] [ ] front_rear_skirt_a_350_x2.stl
  [ ] [ ] front_rear_skirt_b_350_x2.stl
  [ ] [ ] side_skirt_a_350_x2.stl
  [ ] [ ] side_skirt_b_350_x2.stl

Parts for: Spool_Management

  [ ] bowen_retainer.stl
  [ ] spool_holder.stl

Parts for: Tools

  [ ] [ ] rail_installation_guide_center_x2.stl

Parts for: Z_Drive

  [ ] [ ] [a]_belt_tensioner_a_x2.stl
  [ ] [ ] [a]_belt_tensioner_b_x2.stl
  [ ]     [a]_stopgap_80T_hubbed_gear.stl
  [ ] [ ] [a]_z_drive_baseplate_a_x2.stl
  [ ] [ ] [a]_z_drive_baseplate_b_x2.stl
  [ ] [ ] z_drive_main_a_x2.stl
  [ ] [ ] z_drive_main_b_x2.stl
  [ ] [ ] z_drive_retainer_a_x2.stl
  [ ] [ ] z_drive_retainer_b_x2.stl
  [ ] [ ] z_motor_mount_a_x2.stl
  [ ] [ ] z_motor_mount_b_x2.stl

Parts for: Z_Endstop

  [ ] nozzle_probe.stl

Parts for: Z_Idlers

  [ ]     [a]_z_tensioner_x4_6mm.stl
  [ ]     [a]_z_tensioner_x4_9mm.stl
  [ ] [ ] z_tensioner_bracket_a_x2.stl
  [ ] [ ] z_tensioner_bracket_b_x2.stl

Parts for: ZipChain/XY

  [ ] zipchain2_xy_end.stl
  [ ] zipchain2_xy_link_a.stl
  [ ] zipchain2_xy_link_b.stl

Parts for: ZipChain/Z

  [ ] zipchain2_z_end.stl
  [ ] zipchain2_z_link_a.stl
  [ ] zipchain2_z_link_b.stl
  [ ] zipchain2_z_link_b_locking.stl

@gkrystev
Copy link

gkrystev commented Nov 8, 2022

Hey Ken,

I was looking for info about the IGUS zipchain for Voron and I landed on your code.
It's a bit unclear to me about the part "zipchain2_z_link_b_locking.stl", why, and where they are used? The two parts clearly do not fit each other like the zipchain2_z_link_b.stl

Regards

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment