my .bash_profile

gistfile1.sh

# aliases
alias ls='ls -G'
alias cd..="cd .."
alias l="ls -al"
alias lp="ls -p"
alias h='history'
alias mkdir='mkdir -p'
alias tunnel='ssh -nNT -R 19999:localhost:22 kyletilman@24.160.104.164 -p22'
alias la='ls -a'
alias ll='ls -l'
alias ..='cd ..'
alias ...='cd ../..'
alias ....="cd ../../.."
alias .....="cd ../../../.."
alias slt='open -a "Sublime Text 2"'
alias gilla='bugz --connection Trike'
alias next="bugz --connection Trike search -o importance -a kylet | head -1 | awk '{print \$1}' | tee >(xargs bugz --connection Trike get)"
alias changelog='git hist prod/master..stag/dev'
# exports

export HISTTIMEFORMAT="%F %T " 
export LSCOLORS=cxfxcxdxbxexexabagacad
# functions
# change to dev directory
cdd () { 
  repo_folder="/Users/trike/development"
  test=`find $repo_folder/* -maxdepth 0 -type d | grep -i "$1" -m 1`
  if [ ! $1 ] || [ ! $test ]; then
    cd $repo_folder
  else
    cd $test
  fi 
}

# move videos
mvid (){
  rsync --include='*/' --include '*.mov' --include '*.m4v' --include '*.mp4' --exclude '*' -avz $1* $2
}

# move and go to dir
mvgo (){
  if [ -d "$2" ];then
    mv $1 $2 && cd $2
  else
    mv $1 $2
  fi
}

# mkdir and cd
mkcd () {
  mkdir $1 && cd $1
} 

# Extracts files from nearly any archive (like unfoo).
function extract()      # Handy Extract Program.
{
     if [ -f $1 ] ; then
         case $1 in
             *.tar.bz2)   tar xvjf $1     ;;
             *.tar.gz)    tar xvzf $1     ;;
             *.bz2)       bunzip2 $1      ;;
             *.rar)       unrar x $1      ;;
             *.gz)        gunzip $1       ;;
             *.tar)       tar xvf $1      ;;
             *.tbz2)      tar xvjf $1     ;;
             *.tgz)       tar xvzf $1     ;;
             *.zip)       unzip $1        ;;
             *.Z)         uncompress $1   ;;
             *.7z)        7z x $1         ;;
             *)           echo "'$1' cannot be extracted via >extract<" ;;
         esac
     else
         echo "'$1' is not a valid file"
     fi
}

source ~/git-completion.bash

#  Customize BASH PS1 prompt to show current GIT repository and branch.
#  by Mike Stewart - http://MediaDoneRight.com

#  SETUP CONSTANTS
#  Bunch-o-predefined colors.  Makes reading code easier than escape sequences.
#  I don't remember where I found this.  o_O

# Reset
Color_Off="\[\033[0m\]"       # Text Reset

# Regular Colors
Black="\[\033[0;30m\]"        # Black
Red="\[\033[0;31m\]"          # Red
Green="\[\033[0;32m\]"        # Green
Yellow="\[\033[0;33m\]"       # Yellow
Blue="\[\033[0;34m\]"         # Blue
Purple="\[\033[0;35m\]"       # Purple
Cyan="\[\033[0;36m\]"         # Cyan
White="\[\033[0;37m\]"        # White

# Bold
BBlack="\[\033[1;30m\]"       # Black
BRed="\[\033[1;31m\]"         # Red
BGreen="\[\033[1;32m\]"       # Green
BYellow="\[\033[1;33m\]"      # Yellow
BBlue="\[\033[1;34m\]"        # Blue
BPurple="\[\033[1;35m\]"      # Purple
BCyan="\[\033[1;36m\]"        # Cyan
BWhite="\[\033[1;37m\]"       # White

# Underline
UBlack="\[\033[4;30m\]"       # Black
URed="\[\033[4;31m\]"         # Red
UGreen="\[\033[4;32m\]"       # Green
UYellow="\[\033[4;33m\]"      # Yellow
UBlue="\[\033[4;34m\]"        # Blue
UPurple="\[\033[4;35m\]"      # Purple
UCyan="\[\033[4;36m\]"        # Cyan
UWhite="\[\033[4;37m\]"       # White

# Background
On_Black="\[\033[40m\]"       # Black
On_Red="\[\033[41m\]"         # Red
On_Green="\[\033[42m\]"       # Green
On_Yellow="\[\033[43m\]"      # Yellow
On_Blue="\[\033[44m\]"        # Blue
On_Purple="\[\033[45m\]"      # Purple
On_Cyan="\[\033[46m\]"        # Cyan
On_White="\[\033[47m\]"       # White

# High Intensty
IBlack="\[\033[0;90m\]"       # Black
IRed="\[\033[0;91m\]"         # Red
IGreen="\[\033[0;92m\]"       # Green
IYellow="\[\033[0;93m\]"      # Yellow
IBlue="\[\033[0;94m\]"        # Blue
IPurple="\[\033[0;95m\]"      # Purple
ICyan="\[\033[0;96m\]"        # Cyan
IWhite="\[\033[0;97m\]"       # White

# Bold High Intensty
BIBlack="\[\033[1;90m\]"      # Black
BIRed="\[\033[1;91m\]"        # Red
BIGreen="\[\033[1;92m\]"      # Green
BIYellow="\[\033[1;93m\]"     # Yellow
BIBlue="\[\033[1;94m\]"       # Blue
BIPurple="\[\033[1;95m\]"     # Purple
BICyan="\[\033[1;96m\]"       # Cyan
BIWhite="\[\033[1;97m\]"      # White

# High Intensty backgrounds
On_IBlack="\[\033[0;100m\]"   # Black
On_IRed="\[\033[0;101m\]"     # Red
On_IGreen="\[\033[0;102m\]"   # Green
On_IYellow="\[\033[0;103m\]"  # Yellow
On_IBlue="\[\033[0;104m\]"    # Blue
On_IPurple="\[\033[10;95m\]"  # Purple
On_ICyan="\[\033[0;106m\]"    # Cyan
On_IWhite="\[\033[0;107m\]"   # White

# Various variables you might want for your PS1 prompt instead
Time12h="\T"
Time12a="\@"
PathShort="\w"
PathFull="\W"
NewLine="\n"
Jobs="\j"


# This PS1 snippet was adopted from code for MAC/BSD I saw from: http://allancraig.net/index.php?option=com_content&view=article&id=108:ps1-export-command-for-git&catid=45:general&Itemid=96
# I tweaked it to work on UBUNTU 11.04 & 11.10 plus made it mo' better

# export PS1=$IBlack$Time12h$Color_Off'$(git branch &>/dev/null;\
export PS1=$IWhite[$Color_Off$Yellow$PathShort$Color_Off$IWhite'$(git branch &>/dev/null;\
if [ $? -eq 0 ]; then \
  echo "$(echo `git status` | grep "nothing to commit" > /dev/null 2>&1; \
  if [ "$?" -eq "0" ]; then \
    # @4 - Clean repository - nothing to commit
    echo ":'$Green'"$(__git_ps1 " (%s)"); \
  else \
    # @5 - Changes to working tree
    echo ":'$IRed'"$(__git_ps1 " {%s}"); \
  fi) "; \
fi)'$IWhite]'\n'$BICyan'\u'$Color_Off$Yellow'->'$Color_Off''

[[ -s "$HOME/.rvm/scripts/rvm" ]] && source "$HOME/.rvm/scripts/rvm" # Load RVM into a shell session *as a function*

### Added by the Heroku Toolbelt
export PATH="/usr/local/heroku/bin:$PATH"

export PATH=/Users/trike/bin/Sencha/Cmd/3.0.0.250:$PATH

export SENCHA_CMD_3_0_0="/Users/trike/bin/Sencha/Cmd/3.0.0.250"

export PATH=/Applications/SenchaSDKTools-2.0.0-beta3:$PATH

export SENCHA_SDK_TOOLS_2_0_0_BETA3="/Applications/SenchaSDKTools-2.0.0-beta3"